ILendingPool.sol

// SPDX-License-Identifier: agpl-3.0
pragma solidity ^0.8.0;

import { ILendingPoolAddressesProvider } from "./ILendingPoolAddressesProvider.sol";
import { DataTypes } from "./DataTypes.sol";

interface ILendingPool {
    /**
     * @dev Emitted on deposit()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The address initiating the deposit
     * @param onBehalfOf The beneficiary of the deposit, receiving the aTokens
     * @param amount The amount deposited
     * @param referral The referral code used
     **/
    event Deposit(
        address indexed reserve,
        address user,
        address indexed onBehalfOf,
        uint256 amount,
        uint16 indexed referral
    );

    /**
     * @dev Emitted on withdraw()
     * @param reserve The address of the underlyng asset being withdrawn
     * @param user The address initiating the withdrawal, owner of aTokens
     * @param to Address that will receive the underlying
     * @param amount The amount to be withdrawn
     **/
    event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);

    /**
     * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
     * @param reserve The address of the underlying asset being borrowed
     * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
     * initiator of the transaction on flashLoan()
     * @param onBehalfOf The address that will be getting the debt
     * @param amount The amount borrowed out
     * @param borrowRateMode The rate mode: 1 for Stable, 2 for Variable
     * @param borrowRate The numeric rate at which the user has borrowed
     * @param referral The referral code used
     **/
    event Borrow(
        address indexed reserve,
        address user,
        address indexed onBehalfOf,
        uint256 amount,
        uint256 borrowRateMode,
        uint256 borrowRate,
        uint16 indexed referral
    );

    /**
     * @dev Emitted on repay()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The beneficiary of the repayment, getting his debt reduced
     * @param repayer The address of the user initiating the repay(), providing the funds
     * @param amount The amount repaid
     **/
    event Repay(address indexed reserve, address indexed user, address indexed repayer, uint256 amount);

    /**
     * @dev Emitted on swapBorrowRateMode()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The address of the user swapping his rate mode
     * @param rateMode The rate mode that the user wants to swap to
     **/
    event Swap(address indexed reserve, address indexed user, uint256 rateMode);

    /**
     * @dev Emitted on setUserUseReserveAsCollateral()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The address of the user enabling the usage as collateral
     **/
    event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);

    /**
     * @dev Emitted on setUserUseReserveAsCollateral()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The address of the user enabling the usage as collateral
     **/
    event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);

    /**
     * @dev Emitted on rebalanceStableBorrowRate()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The address of the user for which the rebalance has been executed
     **/
    event RebalanceStableBorrowRate(address indexed reserve, address indexed user);

    /**
     * @dev Emitted on flashLoan()
     * @param target The address of the flash loan receiver contract
     * @param initiator The address initiating the flash loan
     * @param asset The address of the asset being flash borrowed
     * @param amount The amount flash borrowed
     * @param premium The fee flash borrowed
     * @param referralCode The referral code used
     **/
    event FlashLoan(
        address indexed target,
        address indexed initiator,
        address indexed asset,
        uint256 amount,
        uint256 premium,
        uint16 referralCode
    );

    /**
     * @dev Emitted when the pause is triggered.
     */
    event Paused();

    /**
     * @dev Emitted when the pause is lifted.
     */
    event Unpaused();

    /**
     * @dev Emitted when a borrower is liquidated. This event is emitted by the LendingPool via
     * LendingPoolCollateral manager using a DELEGATECALL
     * This allows to have the events in the generated ABI for LendingPool.
     * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
     * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
     * @param user The address of the borrower getting liquidated
     * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
     * @param liquidatedCollateralAmount The amount of collateral received by the liiquidator
     * @param liquidator The address of the liquidator
     * @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
     * to receive the underlying collateral asset directly
     **/
    event LiquidationCall(
        address indexed collateralAsset,
        address indexed debtAsset,
        address indexed user,
        uint256 debtToCover,
        uint256 liquidatedCollateralAmount,
        address liquidator,
        bool receiveAToken
    );

    /**
     * @dev Emitted when the state of a reserve is updated. NOTE: This event is actually declared
     * in the ReserveLogic library and emitted in the updateInterestRates() function. Since the function is internal,
     * the event will actually be fired by the LendingPool contract. The event is therefore replicated here so it
     * gets added to the LendingPool ABI
     * @param reserve The address of the underlying asset of the reserve
     * @param liquidityRate The new liquidity rate
     * @param stableBorrowRate The new stable borrow rate
     * @param variableBorrowRate The new variable borrow rate
     * @param liquidityIndex The new liquidity index
     * @param variableBorrowIndex The new variable borrow index
     **/
    event ReserveDataUpdated(
        address indexed reserve,
        uint256 liquidityRate,
        uint256 stableBorrowRate,
        uint256 variableBorrowRate,
        uint256 liquidityIndex,
        uint256 variableBorrowIndex
    );

    /**
     * @dev Deposits an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
     * - E.g. User deposits 100 USDC and gets in return 100 aUSDC
     * @param asset The address of the underlying asset to deposit
     * @param amount The amount to be deposited
     * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
     *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
     *   is a different wallet
     * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
     *   0 if the action is executed directly by the user, without any middle-man
     **/
    function deposit(
        address asset,
        uint256 amount,
        address onBehalfOf,
        uint16 referralCode
    ) external;

    /**
     * @dev Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
     * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
     * @param asset The address of the underlying asset to withdraw
     * @param amount The underlying amount to be withdrawn
     *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
     * @param to Address that will receive the underlying, same as msg.sender if the user
     *   wants to receive it on his own wallet, or a different address if the beneficiary is a
     *   different wallet
     * @return The final amount withdrawn
     **/
    function withdraw(
        address asset,
        uint256 amount,
        address to
    ) external returns (uint256);

    /**
     * @dev Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
     * already deposited enough collateral, or he was given enough allowance by a credit delegator on the
     * corresponding debt token (StableDebtToken or VariableDebtToken)
     * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
     *   and 100 stable/variable debt tokens, depending on the `interestRateMode`
     * @param asset The address of the underlying asset to borrow
     * @param amount The amount to be borrowed
     * @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
     * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
     *   0 if the action is executed directly by the user, without any middle-man
     * @param onBehalfOf Address of the user who will receive the debt. Should be the address of the borrower itself
     * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
     * if he has been given credit delegation allowance
     **/
    function borrow(
        address asset,
        uint256 amount,
        uint256 interestRateMode,
        uint16 referralCode,
        address onBehalfOf
    ) external;

    /**
     * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
     * - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
     * @param asset The address of the borrowed underlying asset previously borrowed
     * @param amount The amount to repay
     * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
     * @param rateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
     * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
     * user calling the function if he wants to reduce/remove his own debt, or the address of any other
     * other borrower whose debt should be removed
     * @return The final amount repaid
     **/
    function repay(
        address asset,
        uint256 amount,
        uint256 rateMode,
        address onBehalfOf
    ) external returns (uint256);

    /**
     * @dev Allows a borrower to swap his debt between stable and variable mode, or viceversa
     * @param asset The address of the underlying asset borrowed
     * @param rateMode The rate mode that the user wants to swap to
     **/
    function swapBorrowRateMode(address asset, uint256 rateMode) external;

    /**
     * @dev Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
     * - Users can be rebalanced if the following conditions are satisfied:
     *     1. Usage ratio is above 95%
     *     2. the current deposit APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too much has been
     *        borrowed at a stable rate and depositors are not earning enough
     * @param asset The address of the underlying asset borrowed
     * @param user The address of the user to be rebalanced
     **/
    function rebalanceStableBorrowRate(address asset, address user) external;

    /**
     * @dev Allows depositors to enable/disable a specific deposited asset as collateral
     * @param asset The address of the underlying asset deposited
     * @param useAsCollateral `true` if the user wants to use the deposit as collateral, `false` otherwise
     **/
    function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;

    /**
     * @dev Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
     * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
     *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
     * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
     * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
     * @param user The address of the borrower getting liquidated
     * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
     * @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
     * to receive the underlying collateral asset directly
     **/
    function liquidationCall(
        address collateralAsset,
        address debtAsset,
        address user,
        uint256 debtToCover,
        bool receiveAToken
    ) external;

    /**
     * @dev Allows smartcontracts to access the liquidity of the pool within one transaction,
     * as long as the amount taken plus a fee is returned.
     * IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept into consideration.
     * For further details please visit https://developers.aave.com
     * @param receiverAddress The address of the contract receiving the funds, implementing the IFlashLoanReceiver interface
     * @param assets The addresses of the assets being flash-borrowed
     * @param amounts The amounts amounts being flash-borrowed
     * @param modes Types of the debt to open if the flash loan is not returned:
     *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
     *   1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
     *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
     * @param onBehalfOf The address  that will receive the debt in the case of using on `modes` 1 or 2
     * @param params Variadic packed params to pass to the receiver as extra information
     * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
     *   0 if the action is executed directly by the user, without any middle-man
     **/
    function flashLoan(
        address receiverAddress,
        address[] calldata assets,
        uint256[] calldata amounts,
        uint256[] calldata modes,
        address onBehalfOf,
        bytes calldata params,
        uint16 referralCode
    ) external;

    /**
     * @dev Returns the user account data across all the reserves
     * @param user The address of the user
     * @return totalCollateralETH the total collateral in ETH of the user
     * @return totalDebtETH the total debt in ETH of the user
     * @return availableBorrowsETH the borrowing power left of the user
     * @return currentLiquidationThreshold the liquidation threshold of the user
     * @return ltv the loan to value of the user
     * @return healthFactor the current health factor of the user
     **/
    function getUserAccountData(address user)
        external
        view
        returns (
            uint256 totalCollateralETH,
            uint256 totalDebtETH,
            uint256 availableBorrowsETH,
            uint256 currentLiquidationThreshold,
            uint256 ltv,
            uint256 healthFactor
        );

    function initReserve(
        address reserve,
        address aTokenAddress,
        address stableDebtAddress,
        address variableDebtAddress,
        address interestRateStrategyAddress
    ) external;

    function setReserveInterestRateStrategyAddress(address reserve, address rateStrategyAddress) external;

    function setConfiguration(address reserve, uint256 configuration) external;

    /**
     * @dev Returns the configuration of the reserve
     * @param asset The address of the underlying asset of the reserve
     * @return The configuration of the reserve
     **/
    function getConfiguration(address asset) external view returns (DataTypes.ReserveConfigurationMap memory);

    /**
     * @dev Returns the configuration of the user across all the reserves
     * @param user The user address
     * @return The configuration of the user
     **/
    function getUserConfiguration(address user) external view returns (DataTypes.UserConfigurationMap memory);

    /**
     * @dev Returns the normalized income normalized income of the reserve
     * @param asset The address of the underlying asset of the reserve
     * @return The reserve's normalized income
     */
    function getReserveNormalizedIncome(address asset) external view returns (uint256);

    /**
     * @dev Returns the normalized variable debt per unit of asset
     * @param asset The address of the underlying asset of the reserve
     * @return The reserve normalized variable debt
     */
    function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);

    /**
     * @dev Returns the state and configuration of the reserve
     * @param asset The address of the underlying asset of the reserve
     * @return The state of the reserve
     **/
    function getReserveData(address asset) external view returns (DataTypes.ReserveData memory);

    function finalizeTransfer(
        address asset,
        address from,
        address to,
        uint256 amount,
        uint256 balanceFromAfter,
        uint256 balanceToBefore
    ) external;

    function getReservesList() external view returns (address[] memory);

    function getAddressesProvider() external view returns (ILendingPoolAddressesProvider);

    function setPause(bool val) external;

    function paused() external view returns (bool);
}