From 9b6bd834eef3c663a217ef8c02351cb2a49ad8bd Mon Sep 17 00:00:00 2001 From: Joel Samson Date: Tue, 11 Nov 2025 07:56:24 -0500 Subject: [PATCH 1/2] Reformat prerequisites section in README.md --- README.md | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/README.md b/README.md index 0014bb7..77296d6 100644 --- a/README.md +++ b/README.md @@ -34,13 +34,13 @@ Using your preferred SSH client/terminal, copy and paste the following command, /usr/sbin/curl -fsL --retry 3 "https://raw.githubusercontent.com/AMTM-OSR/YazFi/master/YazFi.sh" -o /jffs/scripts/YazFi && chmod 0755 /jffs/scripts/YazFi && /jffs/scripts/YazFi install ``` -## Prerequisites -Asuswrt-Merlin running on a supported ASUS router -Entware installed, preferably using amtm -jffs scripts enabled in the firmware; installing Entware should have taken care of this part - Please then follow instructions shown on-screen. An explanation of the settings is provided in the [FAQs](#explanation-of-yazfi-settings) +## Prerequisites +- Asuswrt-Merlin running on a supported ASUS router +- Entware installed, preferably using amtm +- jffs scripts enabled in the firmware; installing Entware should have taken care of this part + ## Usage ### WebUI YazFi can be configured via the WebUI, in the Guest Network section. From a5554f969c0a77d279ff2d3c706aca5694afc3d5 Mon Sep 17 00:00:00 2001 From: Joel Samson Date: Tue, 11 Nov 2025 07:57:20 -0500 Subject: [PATCH 2/2] Clarify prerequisites for Entware and jffs scripts Updated prerequisites section for clarity and recommendations. --- README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 77296d6..760a198 100644 --- a/README.md +++ b/README.md @@ -38,8 +38,8 @@ Please then follow instructions shown on-screen. An explanation of the settings ## Prerequisites - Asuswrt-Merlin running on a supported ASUS router -- Entware installed, preferably using amtm -- jffs scripts enabled in the firmware; installing Entware should have taken care of this part +- Entware (optional but recommended), preferably installed via amtm, to enable enhanced features and functionality +- jffs scripts enabled in the firmware; this can be set manually, and installing Entware via amtm usually takes care of it ## Usage ### WebUI