Skip to content

Latest commit

 

History

History
115 lines (90 loc) · 5.2 KB

README.md

File metadata and controls

115 lines (90 loc) · 5.2 KB
Raw

Tx_CMSIS_Wrapper application description

This application provides an example of CMSIS RTOS adaptation layer for Azure RTOS ThreadX, it shows how to develop an application using the CMSIS RTOS 2 APIs. It demonstrates how to create multiple threads using CMSIS RTOS 2 for ThreadX APIs. At the main function, the application creates 2 threads with the same priority which execute in a periodic cycle of 15 seconds :

  • 'ThreadOne' (Priority : osPriorityNormal)
  • 'ThreadTwo' (Priority : osPriorityNormal)

The function "Led_Toggle()" is the entry function for both threads to toggle the leds.Therefore it is considered as a "critical section" that needs protection with a 'SyncObject' flag in the file "app_tx_cmsisrtos.h" Each thread is running in an infinite loop as following:

  • 'ThreadOne':

    • try to acquire the 'SyncObject' immediately.
    • On Success toggle the 'LED_GREEN' each 500ms for 5 seconds.
    • Release the 'SyncObject'
    • Sleep for 10ms.
    • repeat the steps above

  • 'ThreadTwo':

    • try to acquire the 'SyncObject' immediately.
    • On Success toggle the 'LED_ORANGE' each 500ms for 5 seconds.
    • Release the 'SyncObject'
    • Sleep for 10ms.
    • Repeat the steps above.

By default the 'SyncObject' is defined as "osMutexId_t" .It is possible to use a semaphore "osSemaphoreId_t" by tuning the compile flags in the file "app_tx_cmsisrtos.h".

Expected success behavior

  • 'LED_GREEN' toggles every 500ms for 5 seconds
  • 'LED_ORANGE' toggles every 500ms for 5 seconds
  • Messages on HyperTerminal :
    • "** ThreadXXX : waiting for SyncObject !! **" : When thread is waiting for the SyncObject.
    • "** ThreadXXX : waiting SyncObject released **" : When thread put the SyncObject.
    • "** ThreadXXX : waiting SyncObject acquired **" : When thread get the SyncObject.

Error behaviors

'LED_ORANGE' toggles every 1 second if any error occurs.

Assumptions if any

None

Known limitations

None

ThreadX usage hints

  • ThreadX uses the Systick as time base, thus it is mandatory that the HAL uses a separate time base through the TIM IPs.

  • ThreadX is configured with 100 ticks/sec by default, this should be taken into account when using delays or timeouts at application. It is always possible to reconfigure it in the "tx_user.h", the "TX_TIMER_TICKS_PER_SECOND" define,but this should be reflected in "tx_initialize_low_level.s" file too.

  • ThreadX is disabling all interrupts during kernel start-up to avoid any unexpected behavior, therefore all system related calls (HAL, BSP) should be done either at the beginning of the application or inside the thread entry functions.

  • ThreadX offers the "tx_application_define()" function, that is automatically called by the tx_kernel_enter() API. It is highly recommended to use it to create all applications ThreadX related resources (threads, semaphores, memory pools...) but it should not in any way contain a system API call (HAL or BSP).

  • Using dynamic memory allocation requires to apply some changes to the linker file. ThreadX needs to pass a pointer to the first free memory location in RAM to the tx_application_define() function, using the "first_unused_memory" argument. This require changes in the linker files to expose this memory location.

    • For EWARM add the following section into the .icf file:
    place in RAM_region    { last section FREE_MEM };
    • For MDK-ARM:
    either define the RW_IRAM1 region in the ".sct" file
or modify the line below in "tx_low_level_initilize.s to match the memory region being used
    LDR r1, =|Image$$RW_IRAM1$$ZI$$Limit|
    • For STM32CubeIDE add the following section into the .ld file:
    ._threadx_heap :
  {
     . = ALIGN(8);
     __RAM_segment_used_end__ = .;
     . = . + 64K;
     . = ALIGN(8);
   } >RAM_D1 AT> RAM_D1

    The simplest way to provide memory for ThreadX is to define a new section, see ._threadx_heap above.
In the example above the ThreadX heap size is set to 64KBytes.
The ._threadx_heap must be located between the .bss and the ._user_heap_stack sections in the linker script.	 
Caution: Make sure that ThreadX does not need more than the provided heap memory (64KBytes in this example).	 
Read more in STM32CubeIDE User Guide, chapter: "Linker script".
    • The "tx_initialize_low_level.s" should be also modified to enable the "USE_DYNAMIC_MEMORY_ALLOCATION" flag.

Keywords

RTOS, ThreadX, Thread, CMSIS RTOS, Semaphore, Mutex

Hardware and Software environment

  • This application runs on STM32L4R9xx devices

  • This application has been tested with STMicroelectronics STM32L4R9I-Disco boards Revision MB1311 C-02 and can be easily tailored to any other supported device and development board.

  • A virtual COM port appears in the HyperTerminal:

    • Hyperterminal configuration:
      • Data Length = 8 Bits
      • One Stop Bit
      • No parity
      • BaudRate = 115200 baud
      • Flow control: None

How to use it ?

In order to make the program work, you must do the following :

  • Open your preferred toolchain
  • Rebuild all files
  • Load images into target memory
  • Run the application