options.json empty. Sorry . Wrong file first. New under the first

[TerjeK969]

Fresh install of Allsky on Pi5. Nothing else on Pi. When trying to open allsky settings it says options.json is empty. Hoping its the correct file i am posting here. Absolutley newbie to linux

# For more options and information see
# http://rptl.io/configtxt
# Some settings may impact device functionality. See link above for details

# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on

# Enable audio (loads snd_bcm2835)
dtparam=audio=on

# Additional overlays and parameters are documented
# /boot/firmware/overlays/README

# Automatically load overlays for detected cameras
camera_auto_detect=1

# Automatically load overlays for detected DSI displays
display_auto_detect=1

# Automatically load initramfs files, if found
auto_initramfs=1

# Enable DRM VC4 V3D driver
dtoverlay=vc4-kms-v3d
max_framebuffers=2

# Don't have the firmware create an initial video= setting in cmdline.txt.
# Use the kernel's default instead.
disable_fw_kms_setup=1

# Run in 64-bit mode
arm_64bit=1

# Disable compensation for displays with overscan
disable_overscan=1

# Run as fast as firmware / board allows
arm_boost=1

[cm4]
# Enable host mode on the 2711 built-in XHCI USB controller.
# This line should be removed if the legacy DWC2 controller is required
# (e.g. for USB device mode) or if USB support is not required.
otg_mode=1

[cm5]
dtoverlay=dwc2,dr_mode=host

[all]
dtoverlay=vc4-kms-v3d
#DSI1 Use
dtoverlay=vc4-kms-dsi-waveshare-panel,10_1_inch
#DSI0 Use
#dtoverlay=vc4-kms-dsi-waveshare-panel,10_1_inch,dsi0

[TerjeK969]

• STARTING INSTALLATON AT ti. 24. sep. 12:17:34 +0200 2024.

• No prior Allsky found.

• ZWO camera found.

• Using the 'master' branch.

• Displaying notification image 'InstallationInProgress.jpg'

• CURRENT_LOCALE=nb_NO.UTF-8, TEMP_LOCALE=[[LANG=nb_NO.UTF-8 LANGUAGE=nb_NO.UTF-8 LC_ALL=nb_NO.UTF-8 ]]

• Using ZWO camera.

• Configuring avahi-daemon.

• RAM_SIZE=8192, SUGGESTED_SWAP_SIZE=0.

• Size of current swap (200 MB) is sufficient; no change needed.

• /home/terjepi/allsky/tmp is now in memory.

• Installing the web server.

• Installing dependencies.

• Preparing Allsky commands.

• Modifying locations for WebUI.

• Setting up WebUI options and default settings for ZWO cameras.

• Making new settings file '/home/terjepi/allsky/config/settings.json'.

• Executing makeChanges.sh --force --cameraTypeOnly 'cameraType' 'Camera Type' '' 'ZWO'

• Settings files:
  -rw-r--r-- 2 terjepi terjepi 2102 sep. 24 12:21 /home/terjepi/allsky/config/settings.json
  -rw-r--r-- 2 terjepi terjepi 2102 sep. 24 12:21 /home/terjepi/allsky/config/settings_ZWO_ASI224MC.json

• Keeping 'nb_NO.UTF-8' locale.

• Settings file '/home/terjepi/allsky/config/settings.json' did NOT contain .locale so adding it.

• Settings files now:
  -rw-r--r-- 2 terjepi terjepi 2113 sep. 24 12:21 /home/terjepi/allsky/config/settings.json
  -rw-r--r-- 2 terjepi terjepi 2113 sep. 24 12:21 /home/terjepi/allsky/config/settings_ZWO_ASI224MC.json

• Setting permissions on /var/log/allsky.log and /var/log/allskyperiodic.log.

[EricClaeys]

Please ATTACH, do not copy/paste, /home/pi/allsky/config/logs/install.sh.log

[TerjeK969]

Here it is
install.sh.log

[EricClaeys]

@TerjeK969, the installation didn't finish but there is no error message saying why.
Would you please re-install Allsky? If there are any problems this time, also attach /home/terjepi/allsky/config/logs/install.sh.log.

[TerjeK969]

Ok, I will install again. Thank you for the help. Sendt fra Outlook for iOS<https://aka.ms/o0ukef>

…

________________________________ Fra: Eric Claeys ***@***.***> Sendt: Sunday, October 13, 2024 8:47:16 AM Til: AllskyTeam/allsky ***@***.***> Kopi: TerjeK969 ***@***.***>; Mention ***@***.***> Emne: Re: [AllskyTeam/allsky] options.json empty. Sorry . Wrong file first. New under the first (Discussion #3915) @TerjeK969<https://github.com/TerjeK969>, the installation didn't finish but there is no error message saying why. Would you please re-install Allsky? If there are any problems this time, also attach /home/terjepi/allsky/config/logs/install.sh.log. — Reply to this email directly, view it on GitHub<#3915 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BMBL7PPC77Q6LYCCDPNPEBTZ3IJPJAVCNFSM6AAAAABP2GUI36VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAOJSGY3TCNQ>. You are receiving this because you were mentioned.Message ID: ***@***.***>

[TerjeK969]

Had to reinstall a couple of times before it was ok. Everything seems fine now. Sendt fra Outlook for iOS<https://aka.ms/o0ukef>

…

________________________________ Fra: Terje Pedersen ***@***.***> Sendt: Sunday, October 13, 2024 9:11:35 AM Til: AllskyTeam/allsky ***@***.***>; AllskyTeam/allsky ***@***.***> Kopi: Mention ***@***.***> Emne: Re: [AllskyTeam/allsky] options.json empty. Sorry . Wrong file first. New under the first (Discussion #3915) Ok, I will install again. Thank you for the help. Sendt fra Outlook for iOS<https://aka.ms/o0ukef>

________________________________ Fra: Eric Claeys ***@***.***> Sendt: Sunday, October 13, 2024 8:47:16 AM Til: AllskyTeam/allsky ***@***.***> Kopi: TerjeK969 ***@***.***>; Mention ***@***.***> Emne: Re: [AllskyTeam/allsky] options.json empty. Sorry . Wrong file first. New under the first (Discussion #3915) @TerjeK969<https://github.com/TerjeK969>, the installation didn't finish but there is no error message saying why. Would you please re-install Allsky? If there are any problems this time, also attach /home/terjepi/allsky/config/logs/install.sh.log. — Reply to this email directly, view it on GitHub<#3915 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BMBL7PPC77Q6LYCCDPNPEBTZ3IJPJAVCNFSM6AAAAABP2GUI36VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAOJSGY3TCNQ>. You are receiving this because you were mentioned.Message ID: ***@***.***>