Dockur compose Windows Virtual Machines On Docker

#By default I have disabled the networking side of this compose. You can re-enable it by removing the # from the relevant sections as shown. in my video.
#If you re-enable the networks you will need to amend them to your setup parameters. The same for storage ect...
#This compose is related to my upcoming/already out as of 15.07.2024 https://youtu.be/PKOQOnciy3E KL Tech Videos # www.youtube.com@/kltechvideos/videos

version: "3" # Add version for compatibility 
services:
  windows:
    image: dockurr/windows
    container_name: windows
    #networks:
      #networknamehere:
        #ipv4_address: 192.168.1.2 #Container IP from your network here Make sure its available!
    environment:
      VERSION: win11
      LANGUAGE: English
      REGION: en-GB
      KEYBOARD: en-GB
      DISK_SIZE: 62GB
      RAM_SIZE: 4G
      CPU_CORES: "4"
      #USERNAME: Docker #If you don't change this windows username will be Docker with no password.
      #PASSWORD: Gates
      #DHCP: Y #Enable this to aqauire a second ip from your network but one that windows will use.
      #ARGUMENTS: "-device usb-host,vendorid=0x1234,productid=0x1234"
      #DISK2_SIZE: "32G"
      #DISK3_SIZE: "64G"
      #MANUAL: "Y" 
      #VERSION: "https://example.com/win.iso" 
    devices:
      #- /dev/vhost-net # This allows direct network access and must be used if using the DHCP option above and the macvlan.
      - /dev/kvm
    device_cgroup_rules:
      - c *:* rwm
    volumes:
      # - /home/user/example.iso:/custom.iso
      # - /home/example:/storage2
      # - /mnt/data/example:/storage3
      - /home/kflix/myapps/containervms/testwin11demo:/storage # This is for your primary hard drive. You must change this to suit your setup.
    # - /home/user/example:/shared
    # - /home/user/example:/oem 
    cap_add:
      - NET_ADMIN
    ports:
      - 8006:8006
      - 3389:3389/tcp
      - 3389:3389/udp
    stop_grace_period: 2m
#networks:
  # Change all details below so your network details are used.
  #networknamehere:
    #external: true  # Use this external true if setting up a second one of these compose so you can use the same macvlan.
    #driver: macvlan # Add the driver for the network
    #driver_opts:
      #parent: enp6s0 # Replace with the actual interface (e.g., eth0)
    #ipam:
      #config:
        #- subnet: 192.168.1.0/24
          #gateway: 192.168.1.1