Skip to content

Latest commit

 

History

History
65 lines (48 loc) · 1.99 KB

README-porting.md

File metadata and controls

65 lines (48 loc) · 1.99 KB

Porting

  • Porting To A New Platform

    The first thing you have to do when porting to a new platform, is look at include/SDL_platform.h and create an entry there for your operating system. The standard format is "SDL_PLATFORM_X", where X is the name of the OS. Ideally SDL_platform_defines.h will be able to auto-detect the system it's building on based on C preprocessor symbols.

There are two basic ways of building SDL at the moment:

  1. CMake: cmake -S . -B build && cmake --build build && cmake --install install

    If you have a system that supports CMake, then you might try this. Edit CMakeLists.txt,

    take a look at the large section labelled:

    "Platform-specific options and settings!"

    Add a section for your platform, and then re-run 'cmake -S . -B build' and build!

  2. Using an IDE:

    If you're using an IDE or other non-configure build system, you'll probably want to create a custom SDL_build_config.h for your platform. Edit include/build_config/SDL_build_config.h, add a section for your platform, and create a custom SDL_build_config_{platform}.h, based on SDL_build_config_minimal.h and SDL_build_config.h.cmake

    Add the top level include directory to the header search path, and then add the following sources to the project:

    src/.c src/atomic/.c src/audio/.c src/cpuinfo/.c src/events/.c src/file/.c src/haptic/.c src/joystick/.c src/power/.c src/render/.c src/render/software/.c src/stdlib/.c src/thread/.c src/timer/.c src/video/.c src/audio/disk/.c src/audio/dummy/.c src/filesystem/dummy/.c src/video/dummy/.c src/haptic/dummy/.c src/joystick/dummy/.c src/thread/generic/.c src/timer/dummy/.c src/loadso/dummy/.c

Once you have a working library without any drivers, you can go back to each of the major subsystems and start implementing drivers for your platform.

If you have any questions, don't hesitate to ask on the SDL mailing list: http://www.libsdl.org/mailing-list.php

Enjoy! Sam Lantinga (slouken@libsdl.org)