README.md

sirenofshame-java

Java Controller for the Siren of Shame - Uses usb4java

Prerequisites

Java 8 JDK Installed.

You can download Java 8 here

How to Linux

1. Try to read info from device ./gradlew run -Pargs="-i" if you get an Access Denied then
2. Open the file 99-sirenusb.rules
3. Put in your user group instead of sirenofshame
4. Copy the file to /etc/udev/rules.d/
5. Unplug the Siren
6. Run the command udevadm trigger
7. Plug in the Siren
8. Run the examples ./gradlew run -Pargs="-i"

How to Mac OS

1. Try to read device info ./gradlew run -Pargs="-i"

How to Windows

1. Try to read device info ./gradlew run -Pargs="-i"

Commands

Read Device Info

1. ./gradlew run -Pargs="-i"

Read Led Patterns

1. ./gradlew run -Pargs="-rl"

Read Audio Patterns

1. ./gradlew run -Pargs="-ra"

Manually set LED's

1. Pass -m and 5 bytes (0-255), one for each LED bar
2. For example the following sets the first bar to 50%, the 3rd bar to 100% and turns off everything else
3. ./gradlew run -Pargs="-m 128 0 255 0 0"

Play led patterns

1. Pass -l and the pattern id (see Read Led Patterns) and the duration in seconds
2. For example the following plays Led pattern #2 (On/Off in Firmware 2.1) for 5 seconds
3. ./gradlew run -Pargs="-l 2 5"

Play audio patterns

1. Pass -a and the pattern id (see Read Audio Patterns) and the duration in seconds
2. For example the following plays Audio pattern #1 (Sad Trombone in Firmware 2.1) for 5 seconds
3. ./gradlew run -Pargs="-a 1 5"

Stop led pattern

1. Pass -sl to stop long running led patterns
2. ./gradlew run -Pargs="-sl"

Stop audio pattern

1. Pass -sa to stop long running audio patterns
2. ./gradlew run -Pargs="-sa"