diff --git a/docs/guide/getting-started.md b/docs/guide/getting-started.md
index 3d9f6341..e0c8bbf9 100644
--- a/docs/guide/getting-started.md
+++ b/docs/guide/getting-started.md
@@ -6,7 +6,7 @@ Thank you for using Doorman <3
 
 ## Setup
 
-### Network Connection
+### Step 1: Connect to Wi-Fi
 When you power on your Doorman-S3 for the first time it will blink fast (orange) and opens a new Access Point called `Doorman-S3 Setup`.
 You can setup your WiFi credentials via Access Point, Improv Serial or Improv Bluetooth.
 
@@ -15,8 +15,6 @@ The Access Point password is `open-sesame`.
 When you connect to the Access Point, the web interface should open automatically (see also login to network notifications).\
 If that does not work, you can also navigate to http://192.168.4.1/ manually in your browser.
 
-
-
 ::: tip
 You can benefit from automatic setup in Home Assistant, if your Home Assistant server has Bluetooth enabled.
 
@@ -24,11 +22,11 @@ And thanks to mDNS support, Home Assistant will find your Doorman out of the box
 :::
 ![Home Assistant Discovery](./images/discovery.png)
 
-### Home Assistant
+### Step 2: Connect to Home Assistant
 After connecting Doorman to your network it will blink slowly (blue) and should be automatically discovered by Home Assistant.
 Just click on `Configure` to add the newly discovered ESPHome node.
 
-### Obtaining Bus commands
+### Step 3: Obtaining Bus commands
 ::: warning Important
 You need to connect Doorman to your intercom first. Take a look at the [Wiring](#wiring) section.
 :::