From 2d2a1b02300fd54c896399e05e9500ef1efdcb4d Mon Sep 17 00:00:00 2001 From: Florian Date: Mon, 19 Aug 2024 19:10:01 +0200 Subject: [PATCH] Update Docs --- docs/guide/getting-started.md | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/docs/guide/getting-started.md b/docs/guide/getting-started.md index 3d9f634..e0c8bbf 100644 --- a/docs/guide/getting-started.md +++ b/docs/guide/getting-started.md @@ -6,7 +6,7 @@ Thank you for using Doorman <3 ## Setup -### Network Connection +### Step 1: Connect to Wi-Fi When you power on your Doorman-S3 for the first time it will blink fast (orange) and opens a new Access Point called `Doorman-S3 Setup`. You can setup your WiFi credentials via Access Point, Improv Serial or Improv Bluetooth. @@ -15,8 +15,6 @@ The Access Point password is `open-sesame`. When you connect to the Access Point, the web interface should open automatically (see also login to network notifications).\ If that does not work, you can also navigate to http://192.168.4.1/ manually in your browser. - - ::: tip You can benefit from automatic setup in Home Assistant, if your Home Assistant server has Bluetooth enabled. @@ -24,11 +22,11 @@ And thanks to mDNS support, Home Assistant will find your Doorman out of the box ::: ![Home Assistant Discovery](./images/discovery.png) -### Home Assistant +### Step 2: Connect to Home Assistant After connecting Doorman to your network it will blink slowly (blue) and should be automatically discovered by Home Assistant. Just click on `Configure` to add the newly discovered ESPHome node. -### Obtaining Bus commands +### Step 3: Obtaining Bus commands ::: warning Important You need to connect Doorman to your intercom first. Take a look at the [Wiring](#wiring) section. :::