From 99ab5c2314ffbb34096e06faf0c74d15b25595e6 Mon Sep 17 00:00:00 2001 From: Florian Date: Mon, 12 Aug 2024 16:44:02 +0200 Subject: [PATCH] Update Docs --- docs/guide/getting-started.md | 7 ++++--- firmware/base.yaml | 4 ++-- 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/docs/guide/getting-started.md b/docs/guide/getting-started.md index b61afb4..bad7e07 100644 --- a/docs/guide/getting-started.md +++ b/docs/guide/getting-started.md @@ -7,7 +7,8 @@ Thank you for using Doorman <3 ## Setup ### Network Connection -When you power on your Doorman-S3 for the first time it will blink fast (orange) and opens a new Access Point called "Doorman-S3 Setup". +When you power on your Doorman-S3 for the first time it will blink fast (orange) and opens a new Access Point called `Doorman-S3 Setup`. + The Access Point password is `open-sesame`. You can setup your WiFi credentials via Access Point, Improv Serial or Improv Bluetooth. @@ -34,7 +35,7 @@ You will see a `Last Bus Command` Text Sensor which keeps track the last Bus Com **Important Commands:** - Entrance Doorbell - Apartment Doorbell -- Entrance door opener +- Open Entrance Door Push the buttons on your intercom phone to capture the codes and copy them into the corresponding Configuration Text Inputs. @@ -78,7 +79,7 @@ On most models you should be greeted with a screw terminal labelled with a, b, E Now connect the b-line (Ground) to one of the TCS:BUS-Terminals of your Doorman, then connect the a-line (24V Bus) to the other TCS:BUS-Terminal of your Doorman. ### Power supply options: -::: details 3-Wire Mode via intercom (recommended) +::: details 3-Wire Mode via intercom Connect the P-line (+24V) to the P-Terminal of your Doorman.\ > [!WARNING] > The intercom power supply needs to supply at least 60mA. diff --git a/firmware/base.yaml b/firmware/base.yaml index 5c168b1..0721982 100644 --- a/firmware/base.yaml +++ b/firmware/base.yaml @@ -169,14 +169,14 @@ switch: button: # System Actions - platform: restart - entity_category: config + entity_category: CONFIG name: Restart icon: mdi:restart disabled_by_default: true - platform: safe_mode name: Safe mode - entity_category: config + entity_category: CONFIG disabled_by_default: true # Preconfigured Open Door Button