From d3cbe697dc4b68fef8783396f8606d4e82ef43fb Mon Sep 17 00:00:00 2001 From: "U-DESKTOP-T883T7E\\deadm" Date: Fri, 17 Jan 2025 16:49:55 +0100 Subject: [PATCH] Change convention uppercase and lowercase in frame - checkbox --- rtdata/languages/default | 124 +++++++++++++++++++-------------------- 1 file changed, 62 insertions(+), 62 deletions(-) diff --git a/rtdata/languages/default b/rtdata/languages/default index e2cbaed487..f62d4fcb57 100644 --- a/rtdata/languages/default +++ b/rtdata/languages/default @@ -1080,17 +1080,17 @@ HISTORY_MSG_841;Local - LC curve HISTORY_MSG_842;Local - Blur mask Radius HISTORY_MSG_843;Local - Blur mask Contrast Threshold HISTORY_MSG_844;Local - Blur mask FFTW -HISTORY_MSG_845;Local - Log Encoding -HISTORY_MSG_846;Local - Log Encoding auto -HISTORY_MSG_847;Local - Log Encoding Source -HISTORY_MSG_849;Local - Log Encoding Source auto -HISTORY_MSG_850;Local - Log Encoding B_Ev -HISTORY_MSG_851;Local - Log Encoding W_Ev -HISTORY_MSG_852;Local - Log Encoding Target -HISTORY_MSG_853;Local - Log Encodind loc contrast -HISTORY_MSG_854;Local - Log Encodind Scope -HISTORY_MSG_855;Local - Log Encoding Whole image -HISTORY_MSG_856;Local - Log Encoding Shadows range +HISTORY_MSG_845;Local - Log encoding +HISTORY_MSG_846;Local - Log encoding auto +HISTORY_MSG_847;Local - Log encoding Source +HISTORY_MSG_849;Local - Log encoding Source auto +HISTORY_MSG_850;Local - Log encoding B_Ev +HISTORY_MSG_851;Local - Log encoding W_Ev +HISTORY_MSG_852;Local - Log encoding Target +HISTORY_MSG_853;Local - Log encodind loc contrast +HISTORY_MSG_854;Local - Log encodind Scope +HISTORY_MSG_855;Local - Log encoding Whole image +HISTORY_MSG_856;Local - Log encoding Shadows range HISTORY_MSG_857;Local - Wavelet blur residual HISTORY_MSG_858;Local - Wavelet blur luminance only HISTORY_MSG_859;Local - Wavelet max blur @@ -1124,8 +1124,8 @@ HISTORY_MSG_888;Local - Contrast Wavelet Balance Threshold HISTORY_MSG_889;Local - Contrast Wavelet Graduated Strength HISTORY_MSG_890;Local - Contrast Wavelet Graduated angle HISTORY_MSG_891;Local - Contrast Wavelet Graduated -HISTORY_MSG_892;Local - Log Encoding Graduated Strength -HISTORY_MSG_893;Local - Log Encoding Graduated angle +HISTORY_MSG_892;Local - Log encoding Graduated Strength +HISTORY_MSG_893;Local - Log encoding Graduated angle HISTORY_MSG_894;Local - SD - ΔE preview color intensity HISTORY_MSG_897;Local - Contrast Wavelet ES strength HISTORY_MSG_898;Local - Contrast Wavelet ES radius @@ -1190,27 +1190,27 @@ HISTORY_MSG_956;Local - CH Curve HISTORY_MSG_957;Local - Denoise mode HISTORY_MSG_958;Local - Show/hide settings HISTORY_MSG_959;Local - Inverse blur -HISTORY_MSG_960;Local - Log Encoding - cat16 -HISTORY_MSG_961;Local - Log Encoding Ciecam -HISTORY_MSG_962;Local - Log Encoding Absolute luminance source -HISTORY_MSG_963;Local - Log Encoding Absolute luminance target -HISTORY_MSG_964;Local - Log Encoding Surround -HISTORY_MSG_965;Local - Log Encoding Saturation s -HISTORY_MSG_966;Local - Log Encoding Contrast J -HISTORY_MSG_967;Local - Log Encoding Mask curve C -HISTORY_MSG_968;Local - Log Encoding Mask curve L -HISTORY_MSG_969;Local - Log Encoding Mask curve H -HISTORY_MSG_970;Local - Log Encoding Mask enable -HISTORY_MSG_971;Local - Log Encoding Mask blend -HISTORY_MSG_972;Local - Log Encoding Mask radius -HISTORY_MSG_973;Local - Log Encoding Mask chroma -HISTORY_MSG_974;Local - Log Encoding Mask contrast -HISTORY_MSG_975;Local - Log Encoding Lightness J -HISTORY_MSG_977;Local - Log Encoding Contrast Q -HISTORY_MSG_978;Local - Log Encoding Sursource -HISTORY_MSG_979;Local - Log Encoding Brightness Q -HISTORY_MSG_980;Local - Log Encoding Colorfulness M -HISTORY_MSG_981;Local - Log Encoding Strength +HISTORY_MSG_960;Local - Log encoding - cat16 +HISTORY_MSG_961;Local - Log encoding Ciecam +HISTORY_MSG_962;Local - Log encoding Absolute luminance source +HISTORY_MSG_963;Local - Log encoding Absolute luminance target +HISTORY_MSG_964;Local - Log encoding Surround +HISTORY_MSG_965;Local - Log encoding Saturation s +HISTORY_MSG_966;Local - Log encoding Contrast J +HISTORY_MSG_967;Local - Log encoding Mask curve C +HISTORY_MSG_968;Local - Log encoding Mask curve L +HISTORY_MSG_969;Local - Log encoding Mask curve H +HISTORY_MSG_970;Local - Log encoding Mask enable +HISTORY_MSG_971;Local - Log encoding Mask blend +HISTORY_MSG_972;Local - Log encoding Mask radius +HISTORY_MSG_973;Local - Log encoding Mask chroma +HISTORY_MSG_974;Local - Log encoding Mask contrast +HISTORY_MSG_975;Local - Log encoding Lightness J +HISTORY_MSG_977;Local - Log encoding Contrast Q +HISTORY_MSG_978;Local - Log encoding Sursource +HISTORY_MSG_979;Local - Log encoding Brightness Q +HISTORY_MSG_980;Local - Log encoding Colorfulness M +HISTORY_MSG_981;Local - Log encoding Strength HISTORY_MSG_982;Local - Equalizer hue HISTORY_MSG_983;Local - denoise threshold mask high HISTORY_MSG_984;Local - denoise threshold mask low @@ -1271,7 +1271,7 @@ HISTORY_MSG_1038;Local - Nlmeans - gamma HISTORY_MSG_1039;Local - Grain - gamma HISTORY_MSG_1040;Local - SC - Soft radius HISTORY_MSG_1041;Local - Spot - Munsell -HISTORY_MSG_1042;Local - Log Encoding - threshold +HISTORY_MSG_1042;Local - Log encoding - threshold HISTORY_MSG_1043;Local - Exp - normalize HISTORY_MSG_1044;Local - Local contrast strength HISTORY_MSG_1045;Local - Color and Light strength @@ -1279,7 +1279,7 @@ HISTORY_MSG_1046;Local - Denoise strength HISTORY_MSG_1047;Local - SH and Tone Equalizer strength HISTORY_MSG_1048;Local - DR and Exposure strength HISTORY_MSG_1049;Local - TM strength -HISTORY_MSG_1050;Local - Log Encoding chroma +HISTORY_MSG_1050;Local - Log encoding chroma HISTORY_MSG_1051;Local - Residual wavelet gamma HISTORY_MSG_1052;Local - Residual wavelet slope HISTORY_MSG_1053;Local - Denoise gamma @@ -1374,12 +1374,12 @@ HISTORY_MSG_1141;Local - chroma curve Jz(Hz) HISTORY_MSG_1142;Local - strength soft HISTORY_MSG_1143;Local - Jz blackev HISTORY_MSG_1144;Local - Jz whiteev -HISTORY_MSG_1145;Local - Jz Log Encoding -HISTORY_MSG_1146;Local - Jz Log Encoding target gray +HISTORY_MSG_1145;Local - Jz Log encoding +HISTORY_MSG_1146;Local - Jz Log encoding target gray HISTORY_MSG_1147;Local - Jz Scale Yb scene HISTORY_MSG_1148;Local - Jz Sigmoid HISTORY_MSG_1149;Local - Q Sigmoid & Slope based -HISTORY_MSG_1150;Local - Log Encoding Q instead Sigmoid Q +HISTORY_MSG_1150;Local - Log encoding Q instead Sigmoid Q HISTORY_MSG_BLSHAPE;Blur by level HISTORY_MSG_BLURCWAV;Blur chroma HISTORY_MSG_BLURWAV;Blur luminance @@ -1530,7 +1530,7 @@ HISTORY_MSG_LOCAL_CIE_GAMUTCIE;Local - CIECAM Gamut HISTORY_MSG_LOCAL_CIE_GREXL;Local - CIECAM Green X HISTORY_MSG_LOCAL_CIE_GREYL;Local - CIECAM Green Y HISTORY_MSG_LOCAL_CIE_ILL;Local - CIECAM TRC Illuminant -HISTORY_MSG_LOCAL_CIE_LOGCIEQ;Local - CIECAM Log Encoding Q +HISTORY_MSG_LOCAL_CIE_LOGCIEQ;Local - CIECAM Log encoding Q HISTORY_MSG_LOCAL_CIE_MIDT;Local - CIECAM Mid Tones HISTORY_MSG_LOCAL_CIE_NORM11;Local - CIECAM Normalize luminance 5.11 HISTORY_MSG_LOCAL_CIE_PRIM;Local - CIECAM TRC primaries @@ -1554,7 +1554,7 @@ HISTORY_MSG_LOCAL_CIE_SMOOTHMET;Local - CIECAM Smooth lights method HISTORY_MSG_LOCAL_CIE_SMOOTHYB;Local - CIECAM Scale Yb viewing HISTORY_MSG_LOCAL_CIE_SMOOTH_LUM;Local - CIECAM Levels - Luminosity mode HISTORY_MSG_LOCAL_CIE_STRGRAD;Local - CIECAM Gradient strength L -HISTORY_MSG_LOCAL_CIE_STRLOG;Local - CIECAM Log Encoding strength +HISTORY_MSG_LOCAL_CIE_STRLOG;Local - CIECAM Log encoding strength HISTORY_MSG_LOCAL_CIE_TRC;Local - CIECAM TRC HISTORY_MSG_LOCAL_CIE_WHITES;Local - CIECAM Whites distribution HISTORY_MSG_LOCAL_DEHAZE_BLACK;Local - Dehaze Black @@ -3072,12 +3072,12 @@ TP_LOCALLAB_CHROMASK_TOOLTIP;Changes the chroma of the mask if one exists (i.e. TP_LOCALLAB_CHROML;Chroma (C) TP_LOCALLAB_CHRRT;Chroma TP_LOCALLAB_CIE;Color Appearance (CAM16 & JzCzHz) -TP_LOCALLAB_CIE_SMOOTHFRAME;Tone mapping operators +TP_LOCALLAB_CIE_SMOOTHFRAME;Tone Mapping Operators TP_LOCALLAB_CIE_SMOOTH_LEVELS;RGB channel Slope TP_LOCALLAB_CIE_SMOOTH_LEVELSTRC;RGB channel TRC TP_LOCALLAB_CIE_SMOOTH_SIG;Sigmoid based TP_LOCALLAB_CIEC;Use Ciecam environment parameters -TP_LOCALLAB_CIECAMLOG_TOOLTIP;This module is based on the CIECAM Color Appearance model which was designed to better simulate how human vision perceives colors under different lighting conditions.\nThe first Ciecam process 'Scene conditions' is carried out by Log Encoding, it also uses 'Absolute luminance' at the time of shooting.\nThe second Ciecam process 'Image adjustments' is simplified and uses only 3 variables (local contrast, contrast J, saturation s).\nThe third Ciecam process 'Viewing conditions' adapts the output to the intended viewing conditions (monitor, TV, projector, printer, etc.) so that the chromatic and contrast appearance is preserved across the display environment. +TP_LOCALLAB_CIECAMLOG_TOOLTIP;This module is based on the CIECAM Color Appearance model which was designed to better simulate how human vision perceives colors under different lighting conditions.\nThe first Ciecam process 'Scene conditions' is carried out by Log encoding, it also uses 'Absolute luminance' at the time of shooting.\nThe second Ciecam process 'Image adjustments' is simplified and uses only 3 variables (local contrast, contrast J, saturation s).\nThe third Ciecam process 'Viewing conditions' adapts the output to the intended viewing conditions (monitor, TV, projector, printer, etc.) so that the chromatic and contrast appearance is preserved across the display environment. TP_LOCALLAB_CIECOLORFRA;Color TP_LOCALLAB_CIECONTFRA;Contrast TP_LOCALLAB_CIELIGHTCONTFRA;Lighting & Contrast @@ -3086,7 +3086,7 @@ TP_LOCALLAB_CIEMODE;Change tool position TP_LOCALLAB_CIEMODE_COM;Default TP_LOCALLAB_CIEMODE_DR;Dynamic Range TP_LOCALLAB_CIEMODE_TM;Tone-Mapping -TP_LOCALLAB_CIEMODE_TOOLTIP;In Default mode, Ciecam is added at the end of the process. 'Mask And Modifications' and 'Recovery Based On Luminance Mask' are available for'CAM16 and JzCzHz' at your disposal .\nYou can also integrate Ciecam into other tools if you wish (TM, Wavelet, Dynamic Range, Log Encoding). The results for these tools will be different to those without Ciecam. In this mode, you can also use 'Mask And Modifications' and 'Recovery Based On Luminance Mask'. +TP_LOCALLAB_CIEMODE_TOOLTIP;In Default mode, Ciecam is added at the end of the process. 'Mask And Modifications' and 'Recovery Based On Luminance Mask' are available for'CAM16 and JzCzHz' at your disposal .\nYou can also integrate Ciecam into other tools if you wish (TM, Wavelet, Dynamic Range, Log encoding). The results for these tools will be different to those without Ciecam. In this mode, you can also use 'Mask And Modifications' and 'Recovery Based On Luminance Mask'. TP_LOCALLAB_CIEMODE_WAV;Wavelet TP_LOCALLAB_CIETOOLEXP;Curves TP_LOCALLAB_CIE_SMOOTHFRAME;Highlight Attenuation & Levels @@ -3112,7 +3112,7 @@ TP_LOCALLAB_COFR;Color & Light TP_LOCALLAB_COLORDE;ΔE preview color - intensity TP_LOCALLAB_COLORDEPREV_TOOLTIP;Preview ΔE button in Settings will only work if you have activated 'Sharpening', 'Soft Light and Original Retinex', 'Blur/Grain and Denoise', 'Dehaze and Retinex', or 'Contrast by Detail Levels' in the 'Add tool to current spot' menu.\nFor others tools, the Preview ΔE button is in the tool, which allows previewing ΔE with several tools enabled. Prefer using Mask And Modifications. TP_LOCALLAB_COLORDE_TOOLTIP;Show a blue color preview for ΔE selection if negative and green if positive.\n\nMask And Modifications (show modified areas without mask): show actual modifications if positive, show enhanced modifications (luminance only) with blue and yellow if negative. -TP_LOCALLAB_COLORFRAME;Dominant color +TP_LOCALLAB_COLORFRAME;Dominant Color TP_LOCALLAB_COLORSCOPE;Scope (color tools) TP_LOCALLAB_COLORSCOPE_TOOLTIP;Common Scope slider for Color and Light, Shadows/Highlights, Vibrance.\nOther tools have their own scope controls. TP_LOCALLAB_COLOR_CIE;Color curve @@ -3315,10 +3315,10 @@ TP_LOCALLAB_JZHFRA;Curves Hz TP_LOCALLAB_JZHJZFRA;Curve Jz(Hz) TP_LOCALLAB_JZHUECIE;Hue rotation TP_LOCALLAB_JZLIGHT;Brightness -TP_LOCALLAB_JZLOG;Log Encoding Jz -TP_LOCALLAB_JZLOGWBS_TOOLTIP;Black Ev and White Ev adjustments can be different depending on whether Log Encoding or Sigmoid is used.\nFor Sigmoid, a change (increase in most cases) of White Ev may be necessary to obtain a better rendering of highlights, contrast and saturation. -TP_LOCALLAB_JZLOGWB_TOOLTIP;If Auto is enabled, it will calculate and adjust the Ev levels and the 'Mean luminance Yb%' for the spot area. The resulting values will be used by all Jz operations including 'Log Encoding Jz'.\nAlso calculates the absolute luminance at the time of shooting. -TP_LOCALLAB_JZLOGYBOUT_TOOLTIP;Yb is the relative luminance of the background, expressed as a percentage of gray. 18% gray corresponds to a background luminance of 50% when expressed in CIE L.\nThe data is based on the mean luminance of the image.\nWhen used with Log Encoding, the mean luminance is used to determine the amount of gain that needs to be applied to the signal prior to the Log Encoding. Lower values of mean luminance will result in increased gain. +TP_LOCALLAB_JZLOG;Log encoding Jz +TP_LOCALLAB_JZLOGWBS_TOOLTIP;Black Ev and White Ev adjustments can be different depending on whether Log encoding or Sigmoid is used.\nFor Sigmoid, a change (increase in most cases) of White Ev may be necessary to obtain a better rendering of highlights, contrast and saturation. +TP_LOCALLAB_JZLOGWB_TOOLTIP;If Auto is enabled, it will calculate and adjust the Ev levels and the 'Mean luminance Yb%' for the spot area. The resulting values will be used by all Jz operations including 'Log encoding Jz'.\nAlso calculates the absolute luminance at the time of shooting. +TP_LOCALLAB_JZLOGYBOUT_TOOLTIP;Yb is the relative luminance of the background, expressed as a percentage of gray. 18% gray corresponds to a background luminance of 50% when expressed in CIE L.\nThe data is based on the mean luminance of the image.\nWhen used with Log encoding, the mean luminance is used to determine the amount of gain that needs to be applied to the signal prior to the Log encoding. Lower values of mean luminance will result in increased gain. TP_LOCALLAB_JZMODECAM_TOOLTIP;Jz (only in 'Advanced' mode). Only operational if the output device (monitor) is HDR (peak luminance higher than 100 cd/m2 - ideally between 4000 and 10000 cd/m2. Black point luminance inferior to 0.005 cd/m2). This supposes a) the ICC-PCS for the screen uses Jzazbz (or XYZ), b) works in real precision, c) that the monitor is calibrated (if possible with a DCI-P3 or Rec-2020 gamut), d) that the usual gamma (sRGB or BT709) is replaced by a Perceptual Quantiser (PQ) function. TP_LOCALLAB_JZPQFRA;Jz remapping TP_LOCALLAB_JZPQFRA_TOOLTIP;Allows you to adapt the Jz algorithm to an SDR environment or to the characteristics (performance) of an HDR environment as follows:\n a) for luminance values between 0 and 100 cd/m2, the system behaves as if it were in an SDR environment.\n b) for luminance values between 100 and 10000 cd/m2, you can adapt the algorithm to the HDR characteristics of the image and the monitor.\n\nIf 'PQ - Peak luminance' is set to 10000, 'Jz remappping' behaves in the same way as the original Jzazbz algorithm. @@ -3380,10 +3380,10 @@ TP_LOCALLAB_LOGAUTOGRAY_TOOLTIP;Automatically calculates the 'Mean luminance' fo TP_LOCALLAB_LOGAUTO_TOOLTIP;Pressing this button will calculate the dynamic range and 'Mean luminance' for the scene conditions if the 'Auto mean luminance (Yb%)' is checked).\nAlso calculates the absolute luminance at the time of shooting.\nPress the button again to adjust the automatically calculated values. TP_LOCALLAB_LOGBASE_TOOLTIP;Default = 2.\nValues less than 2 reduce the action of the algorithm making the shadows darker and the highlights brighter.\nWith values greater than 2, the shadows are grayer and the highlights become more washed out. TP_LOCALLAB_LOGCATAD_TOOLTIP;Chromatic adaptation allows us to interpret a color according to its spatio-temporal environment.\nUseful when the white balance deviates significantly from the D50 reference.\nAdapts colors to the illuminant of the output device. -TP_LOCALLAB_LOGCIE;Log Encoding -TP_LOCALLAB_LOGCIEQ;Log Encoding Q with CIECAM (deprecated) -TP_LOCALLAB_LOGCIEQ_TOOLTIP;Activating the checkbox allows you to switch between Log Encoding based on the 3 RGB channels, and Log Encoding based solely on Ciecam’s brightness (Q) channel.\nUsing the Q channel instead of the RGB channels helps avoid undesirable edge effects such as hue and saturation shifts.\nHowever, the settings are more difficult to optimise because Q is unbounded and Ciecam alters the data to take into account the surround conditions, simultaneous contrast, etc.\nYou may have to adjust the following:\n Scene conditions: Mean luminance (Yb), Whites & Blacks distribution, Black Ev, White Ev.\n Source Data Adjustments : Brightness compression, Strength.\n\nNote: when using Log Encoding (Q), be careful not to activate the Disable Ciecam option in the Scene Conditions, Surround menu. -TP_LOCALLAB_LOGCIE_TOOLTIP;Allows you to use Black Ev, White Ev, White and Black distribution, Scene Mean luminance(Yb%) and Viewing Mean luminance(Yb%) for tone-mapping using 'Log Encoding' with Brightness compression. +TP_LOCALLAB_LOGCIE;Log encoding +TP_LOCALLAB_LOGCIEQ;Log encoding Q with CIECAM (deprecated) +TP_LOCALLAB_LOGCIEQ_TOOLTIP;Activating the checkbox allows you to switch between Log encoding based on the 3 RGB channels, and Log encoding based solely on Ciecam’s brightness (Q) channel.\nUsing the Q channel instead of the RGB channels helps avoid undesirable edge effects such as hue and saturation shifts.\nHowever, the settings are more difficult to optimise because Q is unbounded and Ciecam alters the data to take into account the surround conditions, simultaneous contrast, etc.\nYou may have to adjust the following:\n Scene conditions: Mean luminance (Yb), Whites & Blacks distribution, Black Ev, White Ev.\n Source Data Adjustments : Brightness compression, Strength.\n\nNote: when using Log encoding (Q), be careful not to activate the Disable Ciecam option in the Scene Conditions, Surround menu. +TP_LOCALLAB_LOGCIE_TOOLTIP;Allows you to use Black Ev, White Ev, White and Black distribution, Scene Mean luminance(Yb%) and Viewing Mean luminance(Yb%) for tone-mapping using 'Log encoding' with Brightness compression. TP_LOCALLAB_LOGCOLORFL;Colorfulness (M) TP_LOCALLAB_LOGCOLORF_TOOLTIP;Perceived amount of hue in relation to gray.\nIndicator that a stimulus appears more or less colored. TP_LOCALLAB_LOGCONQL;Contrast (Q) @@ -3404,7 +3404,7 @@ TP_LOCALLAB_LOGLIGHTQ;Brightness (Q) TP_LOCALLAB_LOGLIGHTQ_TOOLTIP;Perceived amount of light emanating from a stimulus.\nIndicator that a stimulus appears to be more or less bright, clear. TP_LOCALLAB_LOGLIN;Logarithm mode TP_LOCALLAB_LOGPFRA;Relative Exposure Levels -TP_LOCALLAB_LOGPFRA2;Log Encoding settings +TP_LOCALLAB_LOGPFRA2;Log Encoding Settings TP_LOCALLAB_LOGREPART;Overall strength TP_LOCALLAB_LOGREPART_TOOLTIP;Allows you to adjust the relative strength of the log-encoded image with respect to the original image.\nDoes not affect the Ciecam component. TP_LOCALLAB_LOGSATURL_TOOLTIP;Saturation (s) in CIECAM16 corresponds to the color of a stimulus in relation to its own brightness.\nActs mainly on medium tones and on the highlights. @@ -3438,7 +3438,7 @@ TP_LOCALLAB_MASKHIGTHRESCB_TOOLTIP;Lighter-tone limit above which CBDL (Luminanc TP_LOCALLAB_MASKHIGTHRESC_TOOLTIP;Lighter-tone limit above which the parameters will be restored progressively to their original values prior to being modified by the Color and Light settings.\n You can use certain tools in 'Mask and Modifications' to change the gray levels: 'Structure mask', 'Blur mask', 'Smooth radius', Gamma and Slope, 'Contrast curve', 'Local contrast' (wavelets).\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings. TP_LOCALLAB_MASKHIGTHRESD_TOOLTIP; The denoise is progressively decreased from 100% at the threshold setting to 0% at the maximum white value (as determined by the mask).\n You can use certain tools in 'Mask and Modifications' to change the gray levels: 'Structure mask', 'Smooth radius', Gamma and Slope, 'Contrast curve', 'Local contrast' (wavelets).\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings. TP_LOCALLAB_MASKHIGTHRESE_TOOLTIP;Lighter-tone limit above which the parameters will be restored progressively to their original values prior to being modified by the 'Dynamic range and Exposure' settings.\n You can use certain tools in 'Mask and Modifications' to change the gray levels: 'Smooth radius', Gamma and Slope, 'Contrast curve'.\n Use a 'lockable colorpicker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings. -TP_LOCALLAB_MASKHIGTHRESL_TOOLTIP;Lighter-tone limit above which the parameters will be restored progressively to their original values prior to being modified by the Log Encoding settings.\n You can use certain tools in 'Mask and Modifications' to change the gray levels:'Smooth radius', 'Contrast curve'.\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings. +TP_LOCALLAB_MASKHIGTHRESL_TOOLTIP;Lighter-tone limit above which the parameters will be restored progressively to their original values prior to being modified by the Log encoding settings.\n You can use certain tools in 'Mask and Modifications' to change the gray levels:'Smooth radius', 'Contrast curve'.\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings. TP_LOCALLAB_MASKHIGTHRESRETI_TOOLTIP;Lighter-tone limit above which Retinex (Luminance only) parameters will be restored progressively to their original values prior to being modified by the Retinex settings.\n You can use certain tools in 'Mask and Modifications' to change the gray levels: 'Smooth radius', Gamma and Slope, 'Contrast curve'.\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings. TP_LOCALLAB_MASKHIGTHRESS_TOOLTIP;Lighter-tone limit above which the parameters will be restored progressively to their original values prior to being modified by the Shadows Highlights settings.\n You can use certain tools in 'Mask and Modifications' to change the gray levels: 'Smooth radius', Gamma and Slope, 'Contrast curve'.\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings. TP_LOCALLAB_MASKHIGTHRESTM_TOOLTIP;Lighter-tone limit above which the parameters will be restored progressively to their original values prior to being modified by the Tone Mapping settings.\n You can use certain tools in 'Mask and Modifications' to change the gray levels: 'Smooth radius', Gamma and Slope, 'Contrast curve'.\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings. @@ -3457,7 +3457,7 @@ TP_LOCALLAB_MASKLOWTHRESCB_TOOLTIP;Dark-tone limit below which the CBDL paramete TP_LOCALLAB_MASKLOWTHRESC_TOOLTIP;Dark-tone limit below which the parameters will be restored progressively to their original values prior to being modified by the Color and Light settings.\n You can use certain tools in 'Mask and Modifications' to change the gray levels: 'Structure mask', 'blur mask', 'Smooth radius', Gamma and Slope, 'Contrast curve', 'Local contrast' (wavelets).\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings. TP_LOCALLAB_MASKLOWTHRESD_TOOLTIP;The denoise is progressively increased from 0% at the threshold setting to 100% at the maximum black value (as determined by the mask).\n You can use certain tools in 'Mask and Modifications' to change the gray levels: 'Structure mask', 'Smooth radius', Gamma and Slope, 'Contrast curve', 'Local contrast' (wavelets).\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings. TP_LOCALLAB_MASKLOWTHRESE_TOOLTIP;Dark-tone limit below which the parameters will be restored progressively to their original values prior to being modified by the 'Dynamic range and Exposure' settings.\n You can use certain tools in 'Mask and Modifications' to change the gray levels: 'Smooth radius', Gamma and Slope, 'Contrast curve'.\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings. -TP_LOCALLAB_MASKLOWTHRESL_TOOLTIP;Dark-tone limit below which the parameters will be restored progressively to their original values prior to being modified by the Log Encoding settings.\n You can use certain tools in 'Mask and Modifications' to change the gray levels:'Smooth radius', 'Contrast curve'.\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings. +TP_LOCALLAB_MASKLOWTHRESL_TOOLTIP;Dark-tone limit below which the parameters will be restored progressively to their original values prior to being modified by the Log encoding settings.\n You can use certain tools in 'Mask and Modifications' to change the gray levels:'Smooth radius', 'Contrast curve'.\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings. TP_LOCALLAB_MASKLOWTHRESRETI_TOOLTIP;Dark-tone limit below which the Retinex (Luminance only) parameters will be restored progressively to their original values prior to being modified by the Retinex settings.\n You can use certain tools in 'Mask and Modifications' to change the gray levels: 'Smooth radius', Gamma and Slope, 'Contrast curve'.\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings. TP_LOCALLAB_MASKLOWTHRESS_TOOLTIP;Dark-tone limit below which the parameters will be restored progressively to their original values prior to being modified by the Shadows Highlights settings.\n You can use certain tools in 'Mask and Modifications' to change the gray levels: 'Smooth radius', Gamma and Slope, 'Contrast curve'.\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings. TP_LOCALLAB_MASKLOWTHRESTM_TOOLTIP;Dark-tone limit below which the parameters will be restored progressively to their original values prior to being modified by the Tone Mapping settings.\n You can use certain tools in 'Mask and Modifications' to change the gray levels: 'Smooth radius', Gamma and Slope, 'Contrast curve'.\n Use a 'lockable color picker' on the mask to see which areas will be affected. Make sure you set 'Background color mask' = 0 in Settings. @@ -3467,7 +3467,7 @@ TP_LOCALLAB_MASKLOWTHRES_TOOLTIP;The Guided Filter is progressively increased fr TP_LOCALLAB_MASKRECOL_TOOLTIP;Used to modulate the effect of the Color and Light settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and Modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The 'dark' and 'light' areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Color and Light settings \n In between these two areas, the full value of the Color and Light settings will be applied. TP_LOCALLAB_MASKRECOTHRES;Recovery threshold TP_LOCALLAB_MASKREEXP_TOOLTIP;Used to modulate the effect of the 'Dynamic range and Exposure' settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and Modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The 'dark' and 'light' areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the 'Dynamic range and Exposure' settings \n In between these two areas, the full value of the 'Dynamic range and Exposure' settings will be applied. -TP_LOCALLAB_MASKRELOG_TOOLTIP;Used to modulate the effect of the Log Encoding settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and Modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The 'dark' and 'light' areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Log Encoding settings - can be used to restore highlights reconstructed by Color propagation \n In between these two areas, the full value of the Log Encoding settings will be applied. +TP_LOCALLAB_MASKRELOG_TOOLTIP;Used to modulate the effect of the Log encoding settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and Modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The 'dark' and 'light' areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Log encoding settings - can be used to restore highlights reconstructed by Color propagation \n In between these two areas, the full value of the Log encoding settings will be applied. TP_LOCALLAB_MASKRESCB_TOOLTIP;Used to modulate the effect of the CBDL (Luminance only) settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and Modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The 'dark' and 'light' areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the CBDL settings \n In between these two areas, the full value of the CBDL settings will be applied. TP_LOCALLAB_MASKRESH_TOOLTIP;Used to modulate the effect of the Shadows Highlights settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and Modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The 'dark' and 'light' areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Shadows Highlights settings \n In between these two areas, the full value of the Shadows Highlights settings will be applied. TP_LOCALLAB_MASKRESRETI_TOOLTIP;Used to modulate the effect of the Retinex (Luminance only) settings based on the image luminance information contained in the L(L) or LC(H) masks (Mask and Modifications).\n The L(L) mask or the LC(H) mask must be enabled to use this function.\n The 'dark' and 'light' areas below the dark threshold and above the light threshold will be restored progressively to their original values prior to being modified by the Retinex settings \n In between these two areas, the full value of the Retinex settings will be applied. @@ -3562,13 +3562,13 @@ TP_LOCALLAB_PDEFRAME_TOOLTIP;PDE IPOL algorithm adapted for RawTherapee: gives d TP_LOCALLAB_PRECAMGAMUT_TOOLTIP;If checked, ensures a gamut control just after primary conversion to XYZ. TP_LOCALLAB_PRECAMREFIMAIN_TOOLTIP;Allows you to move the white-point in such a way that it approaches the dominant color. This action modifies the purity. In combination with "Shift x" and "Shift y", allows you to carry out moderate color toning. TP_LOCALLAB_PRECAMREFI_TOOLTIP;Allows you to move the white-point in such a way that it approaches the dominant color. This action modifies the purity. -TP_LOCALLAB_PRECAM_TOOLTIP;'Source Data Adjustments' modifies the Dynamic Range using Log Encoding, the tones of the image and primaries (simplified Abstract Profile), and midtones, just before the Ciecam process. These values are adjustable:\nGamma: Acts mainly on light tones\nSlope: Acts mainly on dark tones. You can choose any pair of gamma and slope (values >1) and the algorithm will ensure that there is continuity between the linear and parabolic parts of the curve.\nDestination primaries: Allows you to change the destination primaries to restore or change image color (saturation). The color balance is significantly preserved when the 'Working Profile' and the 'Destination primaries' are similar. 'Working Profile' is not modified. You can also finely adapt the primaries and the illuminant (white-point). Moving a primary away from the white point reduces saturation and vice versa. Pay attention to the gamut. +TP_LOCALLAB_PRECAM_TOOLTIP;'Source Data Adjustments' modifies the Dynamic Range using Log encoding, the tones of the image and primaries (simplified Abstract Profile), and midtones, just before the Ciecam process. These values are adjustable:\nGamma: Acts mainly on light tones\nSlope: Acts mainly on dark tones. You can choose any pair of gamma and slope (values >1) and the algorithm will ensure that there is continuity between the linear and parabolic parts of the curve.\nDestination primaries: Allows you to change the destination primaries to restore or change image color (saturation). The color balance is significantly preserved when the 'Working Profile' and the 'Destination primaries' are similar. 'Working Profile' is not modified. You can also finely adapt the primaries and the illuminant (white-point). Moving a primary away from the white point reduces saturation and vice versa. Pay attention to the gamut. TP_LOCALLAB_PREVHIDE;Hide additional settings TP_LOCALLAB_PREVIEW;Preview ΔE TP_LOCALLAB_PREVSHOW;Show additional settings TP_LOCALLAB_PRIMILLFRAME;Primaries & Illuminant TP_LOCALLAB_PROXI;ΔE decay -TP_LOCALLAB_QJMODE;Tone mapping operators Q(CAM16) & J(Jz) +TP_LOCALLAB_QJMODE;Tone Mapping Operators Q(CAM16) & J(Jz) TP_LOCALLAB_QJMODE_511;5.11 deprecated TP_LOCALLAB_QJMODE_512;5.12 TP_LOCALLAB_QJMODE_TOOLTIP;The tone-mapping operators that use brightness data (Q for CAM16 and J for Jz) have been modified in RawTherapee version 5.12. This allows you to select either the current or the deprecated version. @@ -3699,7 +3699,7 @@ TP_LOCALLAB_SIGMOIDBL;Display White point (cd/m2) TP_LOCALLAB_SIGMOIDBL11;Blend TP_LOCALLAB_SIGMOIDLAMBDA;Contrast TP_LOCALLAB_SIGMOIDLOGAUTO;Auto threshold -TP_LOCALLAB_SIGMOIDLOGEV_TOOLTIP;If the combo box selection 'Black Ev and White Ev' is 'Sigmoid and Log Encoding' instead of 'Sigmoid only', the two algorithms 'Log Encoding' and 'Sigmoid' are used together. +TP_LOCALLAB_SIGMOIDLOGEV_TOOLTIP;If the combo box selection 'Black Ev and White Ev' is 'Sigmoid and Log encoding' instead of 'Sigmoid only', the two algorithms 'Log encoding' and 'Sigmoid' are used together. TP_LOCALLAB_SIGMOIDNORMCIE;Scale Yb Scene TP_LOCALLAB_SIGMOIDNORMCIE11;Normalize Luminance TP_LOCALLAB_SIGMOIDNORMCIEBLEND_TOOLTIP;Blend acts on the final aspect of the image, contrast and luminance. Ratio between original and output image. @@ -3707,11 +3707,11 @@ TP_LOCALLAB_SIGMOIDNORMCIE_TOOLTIP;Reconstruct luminance so that the mean and va TP_LOCALLAB_SIGMOIDNORMCIEDISP_TOOLTIP;Allows you to adapt the white point to the peak luminance of the display device. Its position in the processing pipeline is not optimal so use with caution. TP_LOCALLAB_SIGMOIDQJ;Tone mapping Q TP_LOCALLAB_SIGMOIDQJ11;Black Ev & White Ev -TP_LOCALLAB_SIGMOIDQJCOMPRCIE_TOOLTIP;When the combo box selection 'Uses Black Ev and White Ev' is 'Sigmoid and Log Encoding Q' or 'Log Encoding instead of Sigmoid' checked. This algorithm compress the data above the threshold slider value. The last value stands for brightness (Q) and should be close as possible to the value 'Compression threshold' (calculate when 'Auto threshold" checked, often > 1). +TP_LOCALLAB_SIGMOIDQJCOMPRCIE_TOOLTIP;When the combo box selection 'Uses Black Ev and White Ev' is 'Sigmoid and Log encoding Q' or 'Log encoding instead of Sigmoid' checked. This algorithm compress the data above the threshold slider value. The last value stands for brightness (Q) and should be close as possible to the value 'Compression threshold' (calculate when 'Auto threshold" checked, often > 1). TP_LOCALLAB_SIGMOIDSENSI;Adaptability TP_LOCALLAB_SIGMOIDTH;Skew TP_LOCALLAB_SIGMOIDTH11;Threshold (Gray point) -TP_LOCALLAB_SIGMOIDWHITESCIE_TOOLTIP;Allows you, in Automatic when the dynamic range of the image is high, to change the distribution of lights in whites and deep blacks.\nCan be used with Log Encoding or Sigmoid with Black Ev and White Ev enabled.\n\nThe algorithm does not change the basic data, but acts on the components necessary to calculate the Dynamic range, Black Ev, White Ev and the Gray point. +TP_LOCALLAB_SIGMOIDWHITESCIE_TOOLTIP;Allows you, in Automatic when the dynamic range of the image is high, to change the distribution of lights in whites and deep blacks.\nCan be used with Log encoding or Sigmoid with Black Ev and White Ev enabled.\n\nThe algorithm does not change the basic data, but acts on the components necessary to calculate the Dynamic range, Black Ev, White Ev and the Gray point. TP_LOCALLAB_SIGMOID_TOOLTIP;Allows you to simulate a tone mapping appearance using both the 'Jz' and 'Sigmoid' function. Two sliders:\na) Contrast acts on the shape of the sigmoid curve and consequently on the strength\nb) Skew (Gray point) distributes the action according to the luminance.\n\nThis new version of Sigmoid is incompatible with previous versions 5.11 and earlier. TP_LOCALLAB_SIGSLOPJCIE;Slope TP_LOCALLAB_SIGTRCCIE;Source Data Adjustments