confibit.h

/* 
 * File:   confibit.h
 * Author: Duy Ngo
 *
 * Created on October 31, 2019, 8:49 PM
 */

#ifndef CONFIBIT_H
#define	CONFIBIT_H

#ifdef	__cplusplus
extern "C" {
#endif
#pragma config FPR = XT_PLL16           // Primary Oscillator Mode (XT w/PLL 16x)
#pragma config FOS = PRI                // Oscillator Source (Primary Oscillator)
#pragma config FCKSMEN = CSW_FSCM_OFF   // Clock Switching and Monitor (Sw Disabled, Mon Disabled)

// FWDT
#pragma config FWPSB = WDTPSB_16        // WDT Prescaler B (1:16)
#pragma config FWPSA = WDTPSA_512       // WDT Prescaler A (1:512)
#pragma config WDT = WDT_OFF            // Watchdog Timer (Disabled)

// FBORPOR
#pragma config FPWRT = PWRT_64          // POR Timer Value (64ms)
#pragma config BODENV = BORV20          // Brown Out Voltage (4.5V)
#pragma config BOREN = PBOR_ON          // PBOR Enable (Enabled)
#pragma config LPOL = PWMxL_ACT_HI      // Low-side PWM Output Polarity (Active High)
#pragma config HPOL = PWMxH_ACT_HI      // High-side PWM Output Polarity (Active High)
#pragma config PWMPIN = RST_IOPIN       // PWM Output Pin Reset (Control with PORT/TRIS regs)
#pragma config MCLRE = MCLR_EN          // Master Clear Enable (Enabled)

// FGS
#pragma config GWRP = GWRP_OFF          // General Code Segment Write Protect (Disabled)
#pragma config GCP = CODE_PROT_OFF      // General Segment Code Protection (Disabled)

// FICD
#pragma config ICS = ICS_PGD            // Comm Channel Select (Use PGC/EMUC and PGD/EMUD)
#ifdef	__cplusplus
}
#endif

#endif	/* CONFIBIT_H */