Makeconf

# Generic configuration for Hurd compilation		-*- makefile-gmake -*-

# Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003,
# 2006, 2007, 2008, 2010, 2011, 2012, 2013 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2, or (at
# your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

# Directory makefiles should set the variable makemode to either
# `server' if they compile and install a single program for /hurd
# `utility' if they compile and install a single program for /bin
# `servers' if they compile and install multiple programs for /hurd
# `utilities' if they compile and install multiple programs for /bin
# `library' if they compile and install a library
# `misc' if they do none of those

# Every makefile should define
# SRCS (all actual source code)
# OBJS (all .o files used to produce some target).
# HURDLIBS (all Hurd libraries used; with no directory name or `lib' attached)
#   For types `server' and `utility' an automatic dependency will be
#   written for these, and type `library' will include a .so dependency.
#   Types `servers' and `utilities'; you have to do it yourself.
# DISTFILES (any built files to be included in distributions).

# Types `server' and `utility' should define
#   target (the name of the program built)

# Types `servers' and `utilities' should define
#   targets (the names of all the programs built)
#   special-targets (targets which should not be built the normal way
#    and have their own rules)

# Type `library' should define
#   libname (the name of the library, without .a.)
#   installhdrs (header files that should be installed in /include)
#   installhdrsubdir (the subdirectory they should go in, default `hurd')
# and must not define $(targets).

# Put this first so it's the default
all:

# Figure out how to locate the parent directory from here.
ifeq (.,$(dir))
.. =
else
.. = ../
endif

ifndef srcdir
# We are building in the source directory itself.
srcdir = .
ifeq (.,$(dir))
top_srcdir = .
else
top_srcdir = ..
endif
endif

# Generic compiler options, appended to whatever the particular makefile set.
# The config.make file will append the values chosed by configure.
INCLUDES = -I. $(srcdirinc)
ifneq (.,$(dir))
INCLUDES += -I.. $(top_srcdirinc)
endif
INCLUDES += -I$(..)include -I$(top_srcdir)/include
CPPFLAGS += $(INCLUDES) \
	     -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 \
	    $($*-CPPFLAGS)
CFLAGS += -std=gnu99 $(gnu89-inline-CFLAGS) -Wall -g -O3 \
	    -fno-strict-aliasing $($*-CFLAGS)

# Include the configure-generated file of parameters.
# This sets up variables for build tools and installation directories.
ifneq (,$(wildcard $(..)config.make))
include $(..)config.make
# Set a flag for the makefiles to indicated config.make was included.
configured = yes
endif

# If we're not configured, don't do deps; then `make TAGS' and such can work.
ifndef configured
no_deps = t
endif

# Test build options set by configure.
ifeq (no,$(build-profiled))
no_prof = t
endif


# Flags for compilation.
# It is important to have this inclusion first; that picks up our
# library header files locally rather than from installed copies.
# Append to any value set by the specific Makefile or by configure.
ifeq ($(srcdir),.)
srcdirinc=
else
srcdirinc=-I$(srcdir)
endif
ifeq ($(top_srcdir),..)
top_srcdirinc=
else
top_srcdirinc=-I$(top_srcdir)
endif

# More useful version of HURDLIBS
library_deps=$(foreach lib,$(HURDLIBS),$(..)lib$(lib)/lib$(lib).so)

# Local programs:
MKINSTALLDIRS = $(top_srcdir)/mkinstalldirs
move-if-change = $(SHELL) $(top_srcdir)/move-if-change

# Decode makemode.
# After this section, $(targets) and $(progtarg) will be defined,
# and everything else should use only those and not $(target).
# targets will have all the (one or more) targets that should be installed;
# progtarg will have all the (one or more) programs that should be linked;
# linktarg will have the complete set of linked targets, including both
# .static versions of $(progtarg) and/or shared library object targets.

ifeq ($(makemode),server)
 doinst := one
 makemode-instdir := hurd
 clean := yes
 targets = $(target)
 progtarg = $(targets)
endif

ifeq ($(makemode),utility)
 doinst := one
 makemode-instdir := bin
 clean := yes
 targets = $(target)
endif

ifeq ($(makemode),servers)
 doinst := many
 makemode-instdir := hurd
 clean := yes
 progtarg := $(targets)
endif

ifeq ($(makemode),utilities)
 doinst := many
 makemode-instdir := bin
 clean := yes
 progtarg := $(targets)
endif

ifeq ($(makemode),library)

 linktarg := $(libname).so.$(hurd-version)

 clean := yes
 cleantarg := $(linktarg) $(addprefix $(libname),.a _p.a _pic.a \
						 .so .so.$(hurd-version))

 targets := $(libname).a $(libname).so
 ifneq ($(no_pic),t)
  targets += $(libname)_pic.a
 endif
 ifneq ($(no_prof),t)
  targets += $(libname)_p.a
 endif

 ifndef installhdrsubdir
  installhdrsubdir = hurd
 endif

else

 ifeq ($(makemode),misc)
   ifndef doinst
     doinst := many
   endif
   ifeq ($(doinst),one)
     targets = $(target)
   endif
   ifeq (,$(installationdir))
     ifneq (,$(targets))
     ?Error subdir Makefile must define installationdir
     else
      makemode-instdir := NOINSTALL
     endif
   endif
 else # server/utility modes
  progtarg := $(filter-out $(special-targets),$(targets))
  linktarg := $(progtarg) $(progtarg:=.static)
 endif

endif

ifndef installationdir
installationdir := $($(makemode-instdir)dir)
endif

ifeq ($(cleantarg),)
 cleantarg := $(linktarg)
endif


# This is a hack to give all hurd utilities a default bug-reporting
# address (defined in libhurdbugaddr/bugaddr.c).
BUGADDR = $(..)libhurdbugaddr/libhurdbugaddr.a
BUGADDR_REF = -uargp_program_bug_address

# Standard targets

.PHONY: all install libs relink dist-hook clean objs

# Just build all the object files.
objs: $(OBJS)
ifneq ($(no_prof),t)
objs: $(OBJS:%.o=%_p.o)
endif
ifeq ($(makemode),library)
ifneq ($(no_pic),t)
objs: $(OBJS:%.o=%_pic.o)
endif
endif

# Installation
ifneq ($(makemode),library)

# not library
installable := $(sort $(linktarg) $(targets))
install-targets := $(targets) $(filter $(build-static:=.static),$(linktarg))
all: $(install-targets)
install: $(installationdir) $(addprefix $(installationdir)/,$(install-targets))
$(addprefix $(installationdir)/,$(installable)): $(installationdir)/%: %
	$(INSTALL_PROGRAM) $(INSTALL-$<-ops) $< $@
else

# library (several parts, library itself, headers, etc.)

all: libs
install libs: add-to-librecord
add-to-librecord: $(targets)
install: $(libdir) $(includedir)/$(installhdrsubdir) $(libdir)/$(libname).so.$(hurd-version) $(addprefix $(libdir)/,$(targets)) $(addprefix $(includedir)/$(installhdrsubdir)/,$(installhdrs))

install-headers: $(includedir)/$(installhdrsubdir) $(addprefix $(includedir)/$(installhdrsubdir)/,$(installhdrs))

$(includedir)/$(installhdrsubdir): $(includedir)
	@$(MKINSTALLDIRS) $@

# Arrange to have the headers installed locally anytime we build the library.
# Not quite perfect, but at least it does end up getting done; and once done
# it never needs to be repeated for a particular header.
local-installhdrsubdir = include/$(installhdrsubdir)
INSTALLED_LOCAL_HEADERS := $(installhdrs:%=../$(local-installhdrsubdir)/%)
$(INSTALLED_LOCAL_HEADERS): ../$(local-installhdrsubdir)/%: Makefile
	@rm -f $@
	@test -d $(@D)/ || $(MKINSTALLDIRS) $(@D)
	echo '#include "../$(dir)/$*"' > $@
libs: $(INSTALLED_LOCAL_HEADERS)
# Make sure we make those before compiling, since -MG will be unhelpful.
$(patsubst %.o,%.d,$(filter %.o,$(OBJS))): $(INSTALLED_LOCAL_HEADERS)

# The installed local headers referring to our own files will use
# relative names with ../$(dir) and make won't notice that's us.
../$(dir)/%: % ;

$(addprefix $(libdir)/$(libname),_p.a .a _pic.a): $(libdir)/%: %
	$(INSTALL_DATA) $< $@
	$(RANLIB) $@

$(libdir)/$(libname).so.$(hurd-version): $(libname).so.$(hurd-version)
	$(INSTALL_DATA) $< $@

$(libdir)/$(libname).so: $(libdir)/$(libname).so.$(hurd-version)
	ln -f -s $(<F) $@

$(addprefix $(includedir)/$(installhdrsubdir)/,$(installhdrs)): $(includedir)/$(installhdrsubdir)/%: %
	$(INSTALL_DATA) $< $@

# Arrange to have the shared libraries available locally in one single
# directory.  This is not used by the build system itself, but is just for easy
# testing.
local-libdir = lib
../$(local-libdir)/$(libname).so.$(hurd-version): $(libname).so.$(hurd-version)
	@test -d $(@D)/ || $(MKINSTALLDIRS) $(@D)
	ln -sf ../$(dir)/$< $@
libs: ../$(local-libdir)/$(libname).so.$(hurd-version)

endif

# Provide default.
install:
install-headers:

# Making installation directories
$(installationdirlist): %:
	@$(MKINSTALLDIRS) $@

# Building the target
ifneq ($(makemode),misc)

ifeq ($(doinst),one)
$(linktarg): $(OBJS) $(library_deps)
endif

# Determine which sort of library we should link against from whether -static
# is used in LDFLAGS.
__libext=.so
__libext-static=.a
_libext=$(__libext$(findstring -static,$(LDFLAGS) $($*-LDFLAGS)))

libsubst=$(basename ${lib})$(_libext)
libsubst-override=${$(notdir $(basename ${lib}))-libsubst}
_libsubst=${libsubst$(patsubst %,-override,${libsubst-override})}

# Direct the linker where to find shared objects specified in the
# dependencies of other shared objects it encounters.
lpath := -L. $(patsubst %,-L%,$(dir $(wildcard ../lib*/lib*.so)))

# Main rule to link executables
#
# (prof-depend is a special kind of run not normally used; see the rules
# below for %.prof_d which uses it.)
ifeq ($(prof-depend),)

define link-executable
$(CC) $(lpath) $(CFLAGS) $($*-CFLAGS) $(LDFLAGS) $($*-LDFLAGS) \
      $(BUGADDR_REF) \
      -o $@
endef
$(progtarg): %$(target-suffix): $(BUGADDR)
	$(link-executable) \
              $(filter %.o,$^) \
	      '-Wl,-(' $(foreach lib,$(filter-out %.o,$^),${_libsubst}) \
		       $($*-LDLIBS) $(LDLIBS) \
	      '-Wl,-)'

$(addsuffix .static,$(progtarg)): %$(target-suffix).static: $(BUGADDR)
	$(link-executable) -static \
	      '-Wl,-(' $(patsubst %.so,%.a,$^) $($*-LDLIBS) $(LDLIBS) \
	      '-Wl,-)' \
	      $(and $(filter %/libstore_part.a,$^), $(PARTED_LIBS))
endif

# Just like above, but tell how to make .prof versions of programs.
$(addsuffix .prof,$(progtarg)): %$(target-suffix).prof: $(BUGADDR)
	$(CC) -pg $(CFLAGS) $($*-CFLAGS) $(LDFLAGS) $($*-LDFLAGS) \
		$(BUGADDR_REF) -static \
		-o $@ \
		'-Wl,-(' $^ $($*-LDLIBS) $(LDLIBS) \
		'-Wl,-)'

ifeq ($(makemode),library)
$(libname).a: $(OBJS)
	rm -f $(libname).a
	$(AR) r $@ $^
	$(RANLIB) $@

$(libname)_p.a: $(patsubst %.o,%_p.o,$(OBJS))
	rm -f $(libname)_p.a
	$(AR) r $@ $^
	$(RANLIB) $@

$(libname)_pic.a: $(patsubst %.o,%_pic.o,$(OBJS))
	rm -f $(libname)_pic.a
	$(AR) r $@ $^
	$(RANLIB) $@

# The shared object needs to be findable in the build directory as
# libfoo.so.VERSION (i.e. its soname) so that ld finds it when looking
# for dependencies of other shared libraries.
# But we also need the libfoo.so name that -lfoo looks for, so
# we make that a symlink.
$(libname).so.$(hurd-version): $(patsubst %.o,%_pic.o,$(OBJS)) $(library_deps)
	$(CC) -shared -Wl,-soname=$@ -o $@ \
	      $(lpath) $(CFLAGS) $(LDFLAGS) $($(libname).so-LDFLAGS) \
	      '-Wl,-(' $(filter-out %.map,$^) \
		       $($(libname).so-LDLIBS) $(LDLIBS) \
	      '-Wl,-)' $(filter %.map,$^)

$(libname).so: $(libname).so.$(hurd-version)
	ln -f -s $< $@
endif

# Providing directory dependencies
ifneq ($(makemode),library)
hurd-bug-addr-dir-dep = libhurdbugaddr
endif

endif # makemode != misc

directory-depend: $(..)$(dir).d
$(..)$(dir).d: $(srcdir)/Makefile
	rm -f $@
	echo $(dir): $(hurd-bug-addr-dir-dep) $(addprefix lib,$(HURDLIBS)) > $@

# TAGS files
ifneq ($(dir),.)
ifdef configured
ifneq ($(OBJS:.o=.d),)
DEP_SRCS = sed -e 's/^.*://' -e 's/ \\$$//' | tr ' ' '\012'| \
           sed -n -e 's@^$(srcdir)@&@p' -e 's@^[^/]@&@p' | sort -ur
TAGSFILES=$(OBJS:.o=.d) $(OTHERTAGS)
else
TAGSFILES=$(OTHERTAGS)
endif
else
TAGSFILES=$(SRCS) $(OTHERTAGS)
endif

TAGS: $(TAGSFILES)
ifeq ($(strip ($(TAGSFILES))),)
# no tags, but parent will include this file, so make empty one.
	> $@
else
ifdef DEP_SRCS
	cat $(OBJS:.o=.d) | $(DEP_SRCS) | etags -o $@ - $(OTHERTAGS)
else
	etags -o $@ $^
endif
endif
endif

.PHONY: dist-hook
ifdef DISTFILES
dist-hook: dist.tar
else
# Don't bother creating an empty tarball.
dist-hook:
endif

# FORCE is needed as $(dist-version) can change between two invocations.
dist.tar: $(DISTFILES) FORCE
	@[ x$(dist-version) != x ] || \
	  { echo >&2 Can\''t make $@ without dist-version set.' && \
	    false; }
	tar -c -f $@ --files-from=/dev/null
# Every file from $(DISTFILES) can exist either in the build directory or in
# the source directory, but that must not affect the name it gets in dist.tar.
	for f in $(DISTFILES); do \
	  if test -e "$$f"; then d=.; else d=$(srcdir); fi && \
	  if test "$(dir)" = "."; then subdir=""; else subdir="$(dir)/"; fi && \
	  tar --append -f $@ --owner=0 --group=0 \
	    --transform="s%^%$(dist-version)/$$subdir%" -C "$$d" "$$f" \
	  || exit $$?; \
	done

# Cleaning
clean:
	rm -f dist.tar
ifeq ($(clean),yes)
	rm -f *.d *.o *Server.c *User.c *_S.h *_U.h *.[su]defsi \
	      $(cleantarg)
endif

relink:
ifeq ($(clean),yes)
	rm -f $(linktarg)
endif

# Subdependencies

# We record which libraries have been built in this run in the file
# $(librecord).  That file contains a series of lines like
# `../libfoo/libfoo.a ../libfoo/libfoo.so: ; /bin/true'
# that serve to inhibit the pattern rule which follows from doing anything.
# Above, when we make `libs' in library directories, we always append
# to $(librecord), so that future make invocations don't bother repeating
# the effort.

# if this is the first level, then set librecord.  Otherwise, read it in.
#ifeq ($(MAKELEVEL),0)
#librecord:=/tmp/hurd-make-$(shell echo $$$$)
#export librecord
#else
#include $(librecord)
#endif

# How to create it.
#$(librecord):
#	touch $(librecord)

# `libs' target depends on this.
#add-to-librecord:
#	echo $(addprefix ../$(dir)/,$(targets)) : \; /bin/true >> $(librecord)

# Building libraries from other directories.  We force both libraries to be
# built if either is, because it will use the appropriate one even if the other
# is specified in someone's dependency list.
#../%.a ../%.so: FORCE
#	$(MAKE) -C $(dir $@) libs

# Tell make where to find other -l libraries that we use
vpath libutil.% $(libdir)/

# The libstore_%.a files fetch symbols from libstore.so
ifneq ($(dir),libstore)
$(boot-store-types:%=../libstore/libstore_%.a): ../libstore/libstore.so
endif

# Default rules to build PIC object files.
%_pic.o: %.c
	$(COMPILE.c) $< -DPIC -fPIC -o $@

%_pic.o: %.S
	$(COMPILE.S) $< -DPIC -o $@

# Default rules to build profiled object files.
%_p.o: %.c
	$(COMPILE.c)  $< -DPROF -pg -o $@

%_p.o: %.S
	$(COMPILE.S) $< -DPROF -o $@

# How to build RPC stubs

# We always need this setting, because libc does not include the bogus names.
MIGCOMFLAGS := -subrprefix __

# User settable variables:
#	mig-sheader-prefix prepend to foo_S.h for name of foo.defs stub header
# 	MIGSFLAGS	   flags to CPP when building server stubs and headers
#	foo-MIGSFLAGS	   same, but only for interface `foo'
# 	MIGCOMSFLAGS	   flags to MiG when building server stubs and headers
#	foo-MIGCOMSFLAGS   same, but only for interface `foo'
# 	MIGUFLAGS	   flags to CPP when building user stubs and headers
#	foo-MIGUFLAGS	   same, but only for interface `foo'
# 	MIGCOMUFLAGS	   flags to MiG when building user stubs and headers
#	foo-MIGCOMUFLAGS   same, but only for interface `foo'
#	CPPFLAGS	   flags to CPP

# Implicit rules for building server and user stubs from mig .defs files.

# These chained rules could be (and used to be) single rules using pipes.
# But it's convenient to be able to explicitly make the intermediate
# files when you want to deal with a problem in the MiG stub generator.

%.sdefsi %.sdefs.d: %.defs
	$(CPP) $(CPPFLAGS) $(MIGSFLAGS) $($*-MIGSFLAGS) -DSERVERPREFIX=S_ \
	  -DHURD_SERVER=1 \
	  -MD -MF $*.sdefs.d.new \
	  $< -o $*.sdefsi
	sed -e 's#[^:]*:#$*Server.c $(mig-sheader-prefix)$*_S.h:#' \
	  < $*.sdefs.d.new > $*.sdefs.d
	rm $*.sdefs.d.new

$(mig-sheader-prefix)%_S.h %Server.c: %.sdefsi
	$(MIGCOM) $(MIGCOMFLAGS) $(MIGCOMSFLAGS) $($*-MIGCOMSFLAGS) \
		    -sheader $(mig-sheader-prefix)$*_S.h -server $*Server.c \
		    -user /dev/null -header /dev/null < $<

%.udefsi %.udefs.d: %.defs
	$(CPP) $(CPPFLAGS) $(MIGUFLAGS) $($*-MIGUFLAGS) \
	  -MD -MF $*.udefs.d.new \
	  $< -o $*.udefsi
	sed -e 's#[^:]*:#$*User.c $*_U.h:#' \
	  < $*.udefs.d.new > $*.udefs.d
	rm $*.udefs.d.new

%_U.h %User.c: %.udefsi
	$(MIGCOM) $(MIGCOMFLAGS) $(MIGCOMUFLAGS) $($*-MIGCOMUFLAGS) < $< \
		  -user $*User.c -server /dev/null -header $*_U.h

# Where to find .defs files.
vpath %.defs $(top_srcdir)/hurd

# These we want to find in the libc include directory...
mach_defs_names = bootstrap exc mach mach4 \
	mach_host mach_port mach_timer_reply memory_object \
	memory_object_default notify \
	gnumach \
	task_notify \

mach_debug_defs_names = mach_debug
device_defs_names = dev_forward device device_reply device_request

mach_defs = $(addsuffix .defs,$(mach_defs_names))
mach_debug_defs = $(addsuffix .defs,$(mach_debug_defs_names))
device_defs = $(addsuffix .defs,$(device_defs_names))

$(mach_defs): %.defs:
	echo '#include <mach/$@>' > $@
$(mach_debug_defs): %.defs:
	echo '#include <mach_debug/$@>' > $@
$(device_defs): %.defs:
	echo '#include <device/$@>' > $@


FORCE:


# How to build automatic dependencies

# Don't include dependencies if $(no_deps) is set; the master makefile
# does this for clean and other such targets that don't need
# dependencies.  That then avoids rebuilding dependencies.

ifneq ($(no_deps),t)

# The MIG stubs depend on their definition files.
# These lines assume that every Makefile that uses a foo_S.h or foo_U.h file
# also mentions the associated fooServer.o or fooUser.o file.
-include $(subst Server.o,.sdefs.d,$(filter %Server.o,$(OBJS))) /dev/null
-include $(subst User.o,.udefs.d,$(filter %User.o,$(OBJS))) /dev/null

ifneq ($(prof-depend),t)
ifneq ($(no_prof),t)
-include $(addsuffix .prof_d,$(progtarg)) /dev/null
endif
endif

# For each .o file we need a .d file.
-include $(subst .o,.d,$(filter %.o,$(OBJS))) /dev/null

endif

# Here is how to build those dependency files

%.prof_d: $(srcdir)/Makefile
	$(MAKE) $* prof-depend=t

ifeq ($(prof-depend),t)
$(progtarg): %: FORCE
	rm -f $@.prof_d
	echo $@.prof: $(subst .so,_p.a,$(subst .o,_p.o,$(filter-out FORCE,$+))) > $@.prof_d
endif

define make-deps
set -e; $(CC) $(CFLAGS) $(CPPFLAGS) -M -MG $<  | \
sed > $@.new -e 's%$*\.o:%$*.o $*_pic.o $*_p.o $@: $($*-DEPS)%' \
	     -e 's% [^ ]*/gcc-lib/[^ ]*\.h%%g'
mv -f $@.new $@
endef

# Here is how to make .d files from .c files
%.d: %.c; $(make-deps)
# Here is how to make .d files from .S files
%.d: %.S; $(make-deps)

# .s files don't go through the preprocessor, so we do this
# This rule must come *after* the genuine ones above, so that
# make doesn't build a .s file and then make an empty dependency
# list.
%.d: %.s
	echo '$*.o: $<' > $@

# Rule to make executable shell scripts from .sh files.
%: %.sh $(..)config.make
	sed -e 's/STANDARD_HURD_VERSION_\(.[^_]*\)_/\1 (GNU Hurd) $(package-version)/' < $< > $@
	chmod +x $@