Skip to content

Latest commit

 

History

History
114 lines (67 loc) · 5.44 KB

configuring-playbook-bot-draupnir.md

File metadata and controls

114 lines (67 loc) · 5.44 KB

Setting up draupnir (optional)

The playbook can install and configure the draupnir moderation bot for you.

See the project's documentation to learn what it does and why it might be useful to you.

If your migrating from Mjolnir skip to step 5b.

1. Register the bot account

The playbook does not automatically create users for you. The bot requires an access token to be able to connect to your homeserver.

You need to register the bot user manually before setting up the bot.

Choose a strong password for the bot. You can generate a good password with a command like this: pwgen -s 64 1.

You can use the playbook to register a new user:

ansible-playbook -i inventory/hosts setup.yml --extra-vars='username=bot.draupnir password=PASSWORD_FOR_THE_BOT admin=no' --tags=register-user

If you would like draupnir to be able to deactivate users, move aliases, shutdown rooms, etc then it must be a server admin so you need to change admin=no to admin=yes in the command above.

2. Get an access token

Refer to the documentation on how to obtain an access token.

3. Make sure the account is free from rate limiting

You will need to prevent Synapse from rate limiting the bot's account. This is not an optional step. If you do not do this step draupnir will crash. This can be done using Synapse's admin API. This can also be manually done by editing the Synapse database. Manually editing the Synapse database is rarely a good idea. Please ask for help if you are uncomfortable with these steps.

  1. Copy the statement below into a text editor.

    INSERT INTO ratelimit_override VALUES ('@bot.draupnir:DOMAIN', 0, 0);
    
  2. Change the username (@bot.draupnir:DOMAIN) to the username you used when you registered the bot's account. You must change DOMAIN to your server's domain.

  3. Get a database terminal by following these steps: maintenance-postgres.md#getting-a-database-terminal

  4. Connect to Synapse's database by typing \connect synapse into the database terminal

  5. Paste in the INSERT INTO command that you edited and press enter.

You can run SELECT * FROM ratelimit_override; to see if it worked. If the output looks like this:

      user_id          | messages_per_second | burst_count
-----------------------+---------------------+-------------
 @bot.draupnir:raim.ist |                   0 |           0`

then you did it correctly.

4. Create a management room

Using your own account, create a new invite only room that you will use to manage the bot. This is the room where you will see the status of the bot and where you will send commands to the bot, such as the command to ban a user from another room. Anyone in this room can control the bot so it is important that you only invite trusted users to this room. The room must be unencrypted since the playbook does not support installing Pantalaimon yet.

Once you have created the room you need to copy the room ID so you can tell the bot to use that room. In Element you can do this by going to the room's settings, clicking Advanced, and then coping the internal room ID. The room ID will look something like !QvgVuKq0ha8glOLGMG:DOMAIN.

Finally invite the @bot.draupnir:DOMAIN account you created earlier into the room.

5a. Adjusting the playbook configuration

Add the following configuration to your inventory/host_vars/matrix.DOMAIN/vars.yml file (adapt to your needs):

You must replace ACCESS_TOKEN_FROM_STEP_2_GOES_HERE and ROOM_ID_FROM_STEP_4_GOES_HERE with the your own values.

matrix_bot_draupnir_enabled: true

matrix_bot_draupnir_access_token: "ACCESS_TOKEN_FROM_STEP_2_GOES_HERE"

matrix_bot_draupnir_management_room: "ROOM_ID_FROM_STEP_4_GOES_HERE"

5b. Migrating from Mjolnir (Only required if migrating.)

Replace your matrix_bot_mjolnir config with matrix_bot_draupnir config. Also disable mjolnir if you're doing migration. That is all you need to do due to that Draupnir can complete migration on its own.

6. Installing

After configuring the playbook, run the installation command:

ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start

Usage

You can refer to the upstream documentation for additional ways to use and configure draupnir. Check out their quickstart guide for some basic commands you can give to the bot.

You can configure additional options by adding the matrix_bot_draupnir_configuration_extension_yaml variable to your inventory/host_vars/matrix.DOMAIN/vars.yml file.

For example to change draupnir's recordIgnoredInvites option to true you would add the following to your vars.yml file.

matrix_bot_draupnir_configuration_extension_yaml: |
  # Your custom YAML configuration goes here.
  # This configuration extends the default starting configuration (`matrix_bot_draupnir_configuration_yaml`).
  #
  # You can override individual variables from the default configuration, or introduce new ones.
  #
  # If you need something more special, you can take full control by
  # completely redefining `matrix_bot_draupnir_configuration_yaml`.
  recordIgnoredInvites: true