UHD-3.12.0.0

• N3x0: Add White Rabbit support, add N300 support, standard BIST includes fan, fix issue with 1GigE, switch to 2 radio blocks with 2 channels each, upgrade TDC to version 2.0, fix issue in ARM deframer
• X300: Enable BasicRX to use A/B/AB/BA muxing setups, more consistent logging, fix enumeration issue with TwinRX
• USRP2/N2x0: Re-add ability to modulate in the DAC, improve ISE settings to better meet timing
• B205mini: Fix global reset, improve timing in b205_ref_pll
• UHD: Remove a lot of Boost usage, mostly replaced by C++11 features, more unit tests, fix Boost 1.67 compatibility, fix compiler warnings, add API to query clock rate range, fix get_usrp_?x_info
• MPM: Refactored N3xx code, moved C++ standard to 14, refactor Boost.Python bindings, use CMake variable MPM_DEVICE
• Logging: Allow disabling fastpath msgs at runtime
• Docs: Clarified meaning of DSP frequencies, improved manual section on synchronization, added some known issues to B100, USRP2, and USRP1, update test test procedure description
• Examples: Improved benchmark_rate (added failure thresholds, fixed incorrect calculation of samples on drops, fixed timeout values), minor fixes to txrx_loopback_to_file
• Utils: Handle U's in calibration tools, create-lvbitx.py is now Py3k compatible, fixed git-hash.sh
• RFNoC: DDCs/DUCs use DDSes instead of CORDIC, add DMA-based replay block in FPGA, add 64-bit support to axi_wrapper, add compat number to radio block,
• Debian: Fix rules file, fix Changelog format
• Fix license headers
• This release includes all bugfixes and features from previous releases, in particular, the 3.11.* release cycle
• Known issues: N310: In some rare scenarios at high rates, streaming can fail and even bring the FPGA into a bad state.

UHD-3.12.0.0-RC1

v3.12.0.0-rc1

Tagging UHD-3.12.0.0 release candidate.

UHD-3.11.1.0

• N310: fix compiler warnings
• N310: Implement digital loopback
• N3xx: Add N3xx devtest
• X300: Properly coerce master clock rate (tick rate)
• X300: handle bad weak_ptr during pcie discovery
• X300: handle bad weak_ptr during pcie discovery
• X300: Fix check_radio_config() to fix errors when using a single dboard
  in slot A
• B200: docs: Suggest modifying recv_frame_size for more stability
• B200: Fix bandwidth warnings and ranges
• N2xx: Fix regression issue that limited tuning range
• UBX: Change antenna functions to coercers on antenna/value properties
• adf4002: Fix register programming for power down bit
• UHD: Fix config file path for some Windows builds
• UHD: Add operators == and != for uhd::dict
• UHD: Add device_addr_t constructor from map
• UHD: Fix range of gain group to skip gains with zero step
• UHD: Changes to support Boost 1.67
• UHD: Correctly set end of burst flag in RX metadata
• UHD: Reduce usage of boost::assign, boost::this_thread::sleep, and boost:bind
• UHD: Update multi_usrp::get_usrp_?x_info() for MPM devices
• UHD: Refactor static const values to fix linker errors in niusrprio
• mpm: cmake: Add git hash and version info to Python module
• mpm: Add reference counters to UIO
• mpm: Add offset to EEPROM reads
• mpm: Disable PPS out during initialization
• mpm: Update cmake to find the correct python3
• mpm: Bump maximum supported revision to 5 (Rev F)
• mpm: Fixed db slot typo in db-id
• mpm: Increased claim timeout, made a separate RPC connection for claim, and
  added asyn calls for long RPC executions
• mpm: Improve xport<->SFP mapping algorithm
• mpmd: Improved find routine to fail fast and verify correct device is
  reachable
• mpmd: Add missing virtual destructors
• rfnoc/x300: Make sure peek32() and peek64() are called with actual addresses
• rfnoc: ctrl_iface cleanup
• rfnoc radio: Improve warning for too many samples requested
• rfnoc radio: get_rx_stream resets sequence num
• examples: Increase settling time, increase buffer fill time, and fix subdevice
  selection in txrx_loopback_to_file
• examples: Improvements to benchmark_rate
• utils: downloader supports multiple RegExs
• utils: Added code to handle underruns during self calibration
• utils: Fix 30s tiemout in query_gpsdo_sensors
• logging: Improve style consistency and demote some messages
• logging: Fix UHD_LOG_FILE cmake variable
• Docs: Add Known Issues section to USRP1, B100, and USRP2/N2x0
• Docs: Hide dependencies directory from Doxygen
• Docs: Clarify subdev specs and magnesium driver usage for N300/N310
• cmake: Improve warning for missing requests
• cmake: update NSIS template
• cmake: Remove images downloader section (replaced by manifest)

UHD-3.11.0.1

• N300: Added driver support (includes some refactoring of N3xx
  codebase)
• MPM: Fix PyLint warnings, Fix error handling for TCA communication
  errors, Fix printout of AD9371 version
• uhd_images_downloader: Create unique archive names for images archives
  (now include git hashes in the filename)
• uhd_images_downloader: Fix SHA256 check
• utils: Add support for N3xx filesystem images to images downloader
• UHD: Minor logging fixes
• UHD: fix legacy compat to work with 2TX radio block
• X300: improve lvbitx bitstream md5 read time
• examples: Enhance benchmark_rate with more stats and timestamps for errors
• cmake: Correctly fail when an unavailable component is requested
• debian: Add UHDConfig.cmake to install list for libuhd-dev

v3.11.0.0

Tagging UHD-3.11.0.0 Release

UHD-3.11.0.0-RC1

• N310: Added driver
• UBX: Add support for CAL antenna for Rev E
• Added the module peripheral manager (MPM) with all subcomponents (N310
  drivers, mpm_shell, RPC server, BIST, etc.)
• UHD: Added rpclib as a internally tracked dependency
• UHD: Reduced the usage of Boost
• UHD: Updated uhd_images_downloader: Now uses more elaborate manifest
  to optimize downloads
• UHD: Introduced uhdlib internal include paths
• UHD: Add support for configuration files. USRP settings can now be set
  using a uhd.conf file in addition to device args
• UHD: Add narrow and narrow_cast
• gr-usrptest: Various bugfixes
• Updated required Vivado version to 2017.4
• Updated all license headers to use SPDX identifiers and correctly
  identify Ettus Research as part of National Instruments
• This release includes all bugfixes and features from previous
  releases, in particular, the 3.10.* release cycle