a Pixelmapping software for the ESP32 and ESP8266 for addressible LED Strips, with a OSC controll interface and FFT data from a Mic or Audio Jack.
have a look what it can do: https://www.youtube.com/watch?v=r7bt4Rk3eVM
We are ready to release Version 1.0 for the ESP32 We wanted to do a Crowdfunding but due to the current things happening in the World we are contemplating to just go straight for a Shop and let it grow gradually. We had to do another Major Change in the Code. It is now possible to set Pallets to auto calculate the Compression based on the NR of LEDs in the Strip. So that its possible to Load the same config into different lamps (last layer has different amount of leds in my Lamps) without having to update the compression or make a different config for each Lamp. In the Load Save options it possible to make a Pattern Load override whats in the Lamp config. Since we still save the entire led setup on each Pattern Save. We have also updated the Open Stage Controll Interface to 1.16.0 So you can use a new Version of Open Stage Controll.
The Software has gone over some major changes in the config files please be aware that when lodaing old config it wont work. Sorry about that but it was nessesery becouse We are running out of memory in the ESP32 with this Software. So I had to do some changes like selecting paletts and mixing will always be 1 setting for 8 Strips. Which I quite like since it was a hassle to change the palette on every strip manually to just see what another one would look like.
We are preparing for the crowdfunding this year (2021) for the Hardware with some Nice Lights to go with it. New info, pictures ect will be added in the next weeks. If you find any bugs please post them!
It is a PixelMapping software for a ESP32 Chip. I have been Controlling Lights at big Psycadelic Music Festivals all over the World Like Modem, Summer Never Ends, Hilltop ..... And I wanted to make a small controller that can bring the Festival lights into our Homes. I started working on this somethime before 2014. It has come a long way since then. This is my Donatoin to the Open Source Comunity to thank for all the free code out there!
A good Slogan for the Tinypixel Mapper is : It can make any Bad Music Look Good :)
The main LED driving library is FastLed. I will donate some of the Earnings from My shop to this library. Since it is the Backbone that makes it all Happen. I just put all the missing parts i needed around it.
If you look at the most little Led drivers from Alibaba or others. They are very simple and yes they can react to music. But all you can do is change speed/Brightness and Color, like a IR Remote for leds. The TinyPixelMapper is a Full Mapping software with Audio input. Just look at the amount of settings you can do in the Wiki. Its like comparing a Bicycle to a Motorcycle. I dont know any other Software out there for the ESP32 that comes close to this. If you know one let me know i want to see it! Might give me new Ideas! And i will name/link it here.
Since I release 1.0 for the ESP32. Its finally where it should be. I will now start making Videos, Demos and HowTo's. I did not want to Make a Video and then have to scrap it since the GUI changed.
We were planning on starting a crowdfunding campaign in the summer 2021. But do to the current situation in the World we are Thinking of just making a Shop. We are negotiation with an artist for permission to use his music. Once this is done we will start posting videos of the different lamps that will be available.
Configuration is done over OSC, with the opensource Software Open Stage Control
We are now on the Open Stage Control version 1.16.0
In the Settings make shure to set the OSC port to 9000
Open Stage Control creates a HTTP Server, so you can connect from any device on your network over a web browser. To configure the Tinypixelmapper. There are 2 Version of the Interface one for edeting Pattern and one just to Play around and Load Paterns (Phone version) There is also a configuration file with just simple options like loading a save file, available for TouchOSC a App available in the Google/ Apple App stores.
Any OSC Software can be used to configure the System. So it is also possible to use Midi Controllers with faders to Play with the unit.
There are different modes of operation: Artnet and Normal.
In the Artnet mode it becomes a ARTNET sender or receiver node on the network.
As an Artnet receiver there is a special sub mode called “ARTNET REMAPPING” In this mode the Artnet data replaces the FFT data from the MIC / Audio IN. Instead of addressing the LEDs directly. This allows us to use almost all the features of the SW like mirroring, rotation or other effects. So you only need to send 1 Universe (170 pixel) an Audio Color Scroll from any Mapping Software and let the Tinypixelmapper mix it against pallets, Since we don’t have any real FFT data the FFT DATA BIN triggers don’t work in this mode.
As an Artnet sender, the unit does not output anything to the locally connected LED outputs. Instead it sends ARTNET packets to other units controlling them. Since its not outputting anything locally we have more time to do calculations so its possible to use one unit to control many units in sync and only the sender need a MIC or Audio in to do the FFT data calculations.
The unit plays Palettes or takes an input from a MIC / audio In that is connected to a MSGEQ7 chip to get FFT data to fill the LEDs.
There are effects that can be added to each strip
A very important and strong feature is the Mixing, You can choose how and in what order the different layers should be mixed.
It should work with any ESP32 it was designed for a Adafruit HUZZAH32. But we have decided to switch to an OLIMEX ESP32-POE. board since Ethernet and and SD card are alot more user friendly. For professional lighting solutions Wifi is not possible since the Party crowd with there mobile phones would interrupt the led output.
We have Release Version 1.0 for the ESP32 but have a list of ideas that we want to bring into the next version.
I have finished to move to the ESP32. Therfore i have branched out the last working version for the ESP8266. I am calling that version 1.0. (Branch = ESP8266-release-1) The ESP8266 version is running rock solid, on my test Led Crystalgrid it was running for 4 months without any interruptions. This old version does not have many of the new cool features such as Mixing layers.
A basic PCB design is ready but we have decided to do a new Version for the Crowdfunding campaign that includes Ethernet, SD card and an audio jack.
The PCB has 2 variable resistors, one for Brightness and the other for FPS. One button, if the button is pressed during boot the unit will go into AP mode with a hardcoded AP password (love4all) even if wifi is disabled in the configuration.
If the Button is pressd after booting it will Load the Next Pattern.
All configurations are saved to the SPIFFS or SD card as txt files. And can be edited over HTTP. "http://IP/edit"
Arduino core for ESP82662.2.0, not tested on 2.3.0
The Olimex ESP32-POE requires a diffreent Partition layout since the Ethernet+SD is using up Memory wre reduced the SPIFFS to minimum but keppt the OTA Partition. Since we now have the config on the SD. Check the Extras/PlatformIO folder for the ini file.
For the Adafruit Feather32 we keppt the Normal SPIFFS Partitioning.
The Basic settings like IP, Pins are in config_TPM.h
The code is still quite messy without to many notes but i tryed to write it in a way that its possible to understand what we want to do. Since this project is very old there are still leftover functions that will be cleaned out in the future. As i have learned a lot while codeing this i will update old code to bring it to the way i program now in the future.
I plan to add the missing documentation in the code in the future as time allows.
TODO in wiki ?
The configuration is done over The Open Stage Control GUI. See Wiki!
More FX ideas. A custom fast purpose built interface instead of using Open stage control. We have started implementing it in Unreal Engine but would need help from un Unreal engine expert.
We used code sniblets from: TODO
If you want to give Us a tip here are Our Crypto Addresses. If You want to support Us, buy A Lamp or Controller from us once the Shop is online! Thanks!
Bitcoin (BTC) bc1qpxdyc8hv57t45eg5jzj3nfu5n9yk5krauds6an
Etherium (ETH) 0x07dd6dbc0830327289B00a0c1345B4f5C2e42708
Stellar (XML) GBQAM6UIS2CVIAI6A7AQSG5VCJ6BILUQOAEM4ETIC5QQG2GLMAZCHSLE