-
Notifications
You must be signed in to change notification settings - Fork 0
/
system_at32f4xx.c
2554 lines (2137 loc) · 71.9 KB
/
system_at32f4xx.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
/**
**************************************************************************
* File Name : system_at32f4xx.c
* Description : CMSIS Cortex-M4 system source file.
* Date : 2018-02-26
* Version : V1.0.4
**************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup at32f4xx_system
* @{
*/
/** @addtogroup at32f4xx_System_Private_Includes
* @{
*/
#include "at32f4xx.h"
/**
* @}
*/
/** @addtogroup at32f4xx_System_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @addtogroup at32f4xx_System_Private_Defines
* @{
*/
/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
frequency (after reset the HSI is used as SYSCLK source)
IMPORTANT NOTE:
==============
1. After each device reset the HSI is used as System clock source.
2. Please make sure that the selected System clock doesn't exceed your device's
maximum frequency.
3. If none of the define below is enabled, the HSI is used as System clock
source.
4. The System clock configuration functions provided within this file assume that:
- For at32f4xx devices, an external 8MHz crystal is used to drive the System clock.
If you are using different crystal you have to adapt those functions accordingly.
Clock (MHz)
PLL from HSE or HSI
SYSCLK HCLK PCLK2 PCLK1
24 24 24 24
36 36 36 36
48 48 48 24
56 56 56 28
72 72 72 36
96 96 96 48
108 108 108 54
120 120 60 60
144 144 72 72
168 168 84 84
176 176 88 88
192 192 96 96
200 200 100 100
*/
/* #define SYSCLK_FREQ_HSE HSE_VALUE */
/* #define SYSCLK_FREQ_24MHz 24000000 */
/* #define SYSCLK_FREQ_36MHz 36000000 */
/* #define SYSCLK_FREQ_48MHz 48000000 */
/* #define SYSCLK_FREQ_56MHz 56000000 */
/* #define SYSCLK_FREQ_72MHz 72000000 */
/* #define SYSCLK_FREQ_96MHz 96000000 */
/* #define SYSCLK_FREQ_108MHz 108000000 */
/* #define SYSCLK_FREQ_120MHz 120000000 */
/* #define SYSCLK_FREQ_144MHz 144000000 */
/* #define SYSCLK_FREQ_168MHz 168000000 */
/* #define SYSCLK_FREQ_176MHz 176000000 */
#define SYSCLK_FREQ_192MHz 192000000
/* #define SYSCLK_FREQ_200MHz 200000000 */
/* #define SYSCLK_FREQ_24MHz_HSI 24000000 */
/* #define SYSCLK_FREQ_36MHz_HSI 36000000 */
/* #define SYSCLK_FREQ_48MHz_HSI 48000000 */
/* #define SYSCLK_FREQ_56MHz_HSI 56000000 */
/* #define SYSCLK_FREQ_72MHz_HSI 72000000 */
/* #define SYSCLK_FREQ_96MHz_HSI 96000000 */
/* #define SYSCLK_FREQ_108MHz_HSI 108000000 */
/* #define SYSCLK_FREQ_120MHz_HSI 120000000 */
/* #define SYSCLK_FREQ_144MHz_HSI 144000000 */
/* #define SYSCLK_FREQ_168MHz_HSI 168000000 */
/* #define SYSCLK_FREQ_176MHz_HSI 176000000 */
/* #define SYSCLK_FREQ_192MHz_HSI 192000000 */
/* #define SYSCLK_FREQ_200MHz_HSI 200000000 */
/*!< Uncomment the following line if you need to use external SRAM mounted
(AT32 High density and XL-density devices) as data memory */
/* #define DATA_IN_ExtSRAM */
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
/**
* @}
*/
/** @addtogroup at32f4xx_System_Private_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup at32f4xx_System_Private_Variables
* @{
*/
/*******************************************************************************
* Clock Definitions
*******************************************************************************/
#ifdef SYSCLK_FREQ_HSE
uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_24MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_36MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_48MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_56MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_72MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_96MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_108MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_108MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_120MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_144MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_168MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_168MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_176MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_176MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_192MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_192MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_200MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_200MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_24MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_36MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_48MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_56MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_72MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_96MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_108MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_108MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_120MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_144MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_168MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_168MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_176MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_176MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_192MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_192MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_200MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_200MHz_HSI; /*!< System Clock Frequency (Core Clock) */
#else /*!< HSI Selected as System Clock source */
#define SYSCLK_FREQ_HSI HSI_VALUE
uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */
#endif
__I uint8_t AHBPscTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
/**
* @}
*/
/** @addtogroup at32f4xx_System_Private_FunctionPrototypes
* @{
*/
static void SetSysClock(void);
#ifdef SYSCLK_FREQ_HSE
static void SetSysClockToHSE(void);
#elif defined SYSCLK_FREQ_24MHz
static void SetSysClockTo24M(void);
#elif defined SYSCLK_FREQ_36MHz
static void SetSysClockTo36M(void);
#elif defined SYSCLK_FREQ_48MHz
static void SetSysClockTo48M(void);
#elif defined SYSCLK_FREQ_56MHz
static void SetSysClockTo56M(void);
#elif defined SYSCLK_FREQ_72MHz
static void SetSysClockTo72M(void);
#elif defined SYSCLK_FREQ_96MHz
static void SetSysClockTo96M(void);
#elif defined SYSCLK_FREQ_108MHz
static void SetSysClockTo108M(void);
#elif defined SYSCLK_FREQ_120MHz
static void SetSysClockTo120M(void);
#elif defined SYSCLK_FREQ_144MHz
static void SetSysClockTo144M(void);
#elif defined SYSCLK_FREQ_168MHz
static void SetSysClockTo168M(void);
#elif defined SYSCLK_FREQ_176MHz
static void SetSysClockTo176M(void);
#elif defined SYSCLK_FREQ_192MHz
static void SetSysClockTo192M(void);
#elif defined SYSCLK_FREQ_200MHz
static void SetSysClockTo200M(void);
#elif defined SYSCLK_FREQ_24MHz_HSI
static void SetSysClockTo24MHSI(void);
#elif defined SYSCLK_FREQ_36MHz_HSI
static void SetSysClockTo36MHSI(void);
#elif defined SYSCLK_FREQ_48MHz_HSI
static void SetSysClockTo48MHSI(void);
#elif defined SYSCLK_FREQ_56MHz_HSI
static void SetSysClockTo56MHSI(void);
#elif defined SYSCLK_FREQ_72MHz_HSI
static void SetSysClockTo72MHSI(void);
#elif defined SYSCLK_FREQ_96MHz_HSI
static void SetSysClockTo96MHSI(void);
#elif defined SYSCLK_FREQ_108MHz_HSI
static void SetSysClockTo108MHSI(void);
#elif defined SYSCLK_FREQ_120MHz_HSI
static void SetSysClockTo120MHSI(void);
#elif defined SYSCLK_FREQ_144MHz_HSI
static void SetSysClockTo144MHSI(void);
#elif defined SYSCLK_FREQ_168MHz_HSI
static void SetSysClockTo168MHSI(void);
#elif defined SYSCLK_FREQ_176MHz_HSI
static void SetSysClockTo176MHSI(void);
#elif defined SYSCLK_FREQ_192MHz_HSI
static void SetSysClockTo192MHSI(void);
#elif defined SYSCLK_FREQ_200MHz_HSI
static void SetSysClockTo200MHSI(void);
#endif
#ifdef DATA_IN_ExtSRAM
static void SystemInit_ExtMemCtrl(void);
#endif /* DATA_IN_ExtSRAM */
/**
* @}
*/
/** @addtogroup at32f4xx_System_Private_Functions
* @{
*/
/**
* @brief Setup the microcontroller system
* Initialize the Embedded Flash Interface, the PLL and update the
* SystemCoreClock variable.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
void SystemInit (void)
{
#if defined (__FPU_USED) && (__FPU_USED == 1U)
SCB->CPACR |= ((3U << 10U * 2U) | /* set CP10 Full Access */
(3U << 11U * 2U) ); /* set CP11 Full Access */
#endif
/* Reset the RCC clock configuration to the default reset state(for debug purpose) */
/* Set HSIEN bit */
BIT_SET(RCC->CTRL, RCC_CTRL_HSIEN);
/* Reset SW, AHBPSC, APB1PSC, APB2PSC, ADCPSC and CLKOUT bits */
BIT_CLEAR(RCC->CFG, RCC_CFG_SYSCLKSEL | RCC_CFG_AHBPSC | \
RCC_CFG_APB1PSC | RCC_CFG_APB2PSC | \
RCC_CFG_ADCPSC | RCC_CFG_CLKOUT);
/* Reset HSEEN, HSECFDEN and PLLEN bits */
BIT_CLEAR(RCC->CTRL, RCC_CTRL_HSEEN | RCC_CTRL_HSECFDEN | \
RCC_CTRL_PLLEN);
/* Reset HSEBYPS bit */
BIT_CLEAR(RCC->CTRL, RCC_CTRL_HSEBYPS);
/* Reset PLLRC, PLLHSEPSC, PLLMUL, USBPSC and PLLRANGE bits */
BIT_CLEAR(RCC->CFG, RCC_CFG_PLLRC | RCC_CFG_PLLHSEPSC | \
RCC_CFG_PLLMULT | RCC_CFG_USBPSC | RCC_CFG_PLLRANGE);
/* Reset USB768B, CLKOUT[3], HSICAL_KEY[7:0] */
BIT_CLEAR(RCC->MISC, 0x010100FF);
/* Disable all interrupts and clear pending bits */
RCC->CLKINT = RCC_CLKINT_LSISTBLFC | RCC_CLKINT_LSESTBLFC | \
RCC_CLKINT_HSISTBLFC | RCC_CLKINT_HSESTBLFC | \
RCC_CLKINT_PLLSTBLFC | RCC_CLKINT_HSECFDFC;
#ifdef DATA_IN_ExtSRAM
SystemInit_ExtMemCtrl();
#endif /* DATA_IN_ExtSRAM */
/* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
/* Configure the Flash Latency cycles and enable prefetch buffer */
SetSysClock();
#ifdef VECT_TAB_SRAM
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
#else
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
#endif
}
/**
* @brief Update SystemCoreClock variable according to Clock Register Values.
* The SystemCoreClock variable contains the core clock (HCLK), it can
* be used by the user application to setup the SysTick timer or configure
* other parameters.
*
* @note Each time the core clock (HCLK) changes, this function must be called
* to update SystemCoreClock variable value. Otherwise, any configuration
* based on this variable will be incorrect.
*
* @note - The system frequency computed by this function is not the real
* frequency in the chip. It is calculated based on the predefined
* constant and the selected clock source:
*
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
*
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
*
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
* or HSI_VALUE(*) multiplied by the PLL factors.
*
* (*) HSI_VALUE is a constant defined in at32f4xx.h file (default value
* 8 MHz) but the real value may vary depending on the variations
* in voltage and temperature.
*
* (**) HSE_VALUE is a constant defined in at32f4xx.h file (default value
* 8 MHz or 25 MHz, depedning on the product used), user has to ensure
* that HSE_VALUE is same as the real frequency of the crystal used.
* Otherwise, this function may have wrong result.
*
* - The result of this function could be not correct when using fractional
* value for HSE crystal.
* @param None
* @retval None
*/
void SystemCoreClockUpdate (void)
{
uint32_t tmp = 0, pllmult = 0, pllrefclk = 0;
/* Get SYSCLK source -------------------------------------------------------*/
tmp = RCC->CFG & RCC_CFG_SYSCLKSTS;
switch (tmp)
{
case RCC_CFG_SYSCLKSTS_HSI: /* HSI used as system clock */
SystemCoreClock = HSI_VALUE;
break;
case RCC_CFG_SYSCLKSTS_HSE: /* HSE used as system clock */
SystemCoreClock = HSE_VALUE;
break;
case RCC_CFG_SYSCLKSTS_PLL: /* PLL used as system clock */
/* Get PLL clock source and multiplication factor ----------------------*/
pllrefclk = RCC->CFG & RCC_CFG_PLLRC;
pllmult = RCC_GET_PLLMULT(RCC->CFG);
if (pllrefclk == RCC_PLLRefClk_HSI_Div2)
{
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
SystemCoreClock = (HSI_VALUE >> 1) * pllmult;
}
else
{
/* HSE selected as PLL clock entry */
if ((RCC->CFG & RCC_CFG_PLLHSEPSC) != (uint32_t)RESET)
{
/* HSE oscillator clock divided by 2 */
SystemCoreClock = (HSE_VALUE >> 1) * pllmult;
}
else
{
SystemCoreClock = HSE_VALUE * pllmult;
}
}
break;
default:
SystemCoreClock = HSI_VALUE;
break;
}
/* Compute HCLK clock frequency ----------------*/
/* Get HCLK prescaler */
tmp = AHBPscTable[((RCC->CFG & RCC_CFG_AHBPSC) >> 4)];
/* HCLK clock frequency */
SystemCoreClock >>= tmp;
}
/**
* @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
* @param None
* @retval None
*/
static void SetSysClock(void)
{
#ifdef SYSCLK_FREQ_HSE
SetSysClockToHSE();
#elif defined SYSCLK_FREQ_24MHz
SetSysClockTo24M();
#elif defined SYSCLK_FREQ_36MHz
SetSysClockTo36M();
#elif defined SYSCLK_FREQ_48MHz
SetSysClockTo48M();
#elif defined SYSCLK_FREQ_56MHz
SetSysClockTo56M();
#elif defined SYSCLK_FREQ_72MHz
SetSysClockTo72M();
#elif defined SYSCLK_FREQ_96MHz
SetSysClockTo96M();
#elif defined SYSCLK_FREQ_108MHz
SetSysClockTo108M();
#elif defined SYSCLK_FREQ_120MHz
SetSysClockTo120M();
#elif defined SYSCLK_FREQ_144MHz
SetSysClockTo144M();
#elif defined SYSCLK_FREQ_168MHz
SetSysClockTo168M();
#elif defined SYSCLK_FREQ_176MHz
SetSysClockTo176M();
#elif defined SYSCLK_FREQ_192MHz
SetSysClockTo192M();
#elif defined SYSCLK_FREQ_200MHz
SetSysClockTo200M();
#elif defined SYSCLK_FREQ_24MHz_HSI
SetSysClockTo24MHSI();
#elif defined SYSCLK_FREQ_36MHz_HSI
SetSysClockTo36MHSI();
#elif defined SYSCLK_FREQ_48MHz_HSI
SetSysClockTo48MHSI();
#elif defined SYSCLK_FREQ_56MHz_HSI
SetSysClockTo56MHSI();
#elif defined SYSCLK_FREQ_72MHz_HSI
SetSysClockTo72MHSI();
#elif defined SYSCLK_FREQ_96MHz_HSI
SetSysClockTo96MHSI();
#elif defined SYSCLK_FREQ_108MHz_HSI
SetSysClockTo108MHSI();
#elif defined SYSCLK_FREQ_120MHz_HSI
SetSysClockTo120MHSI();
#elif defined SYSCLK_FREQ_144MHz_HSI
SetSysClockTo144MHSI();
#elif defined SYSCLK_FREQ_168MHz_HSI
SetSysClockTo168MHSI();
#elif defined SYSCLK_FREQ_176MHz_HSI
SetSysClockTo176MHSI();
#elif defined SYSCLK_FREQ_192MHz_HSI
SetSysClockTo192MHSI();
#elif defined SYSCLK_FREQ_200MHz_HSI
SetSysClockTo200MHSI();
#endif
/* If none of the define above is enabled, the HSI is used as System clock
source (default after reset) */
}
/**
* @brief Setup the external memory controller. Called in startup_at32f403.s
* before jump to __main
* @param None
* @retval None
*/
#ifdef DATA_IN_ExtSRAM
/**
* @brief Setup the external memory controller.
* Called in startup_at32f4xx_xx.s/.c before jump to main.
* This function configures the external SRAM mounted
* (AT32 High density devices). This SRAM will be used as program
* data memory (including heap and stack).
* @param None
* @retval None
*/
void SystemInit_ExtMemCtrl(void)
{
/* Enable XMC clock */
RCC->AHBEN = RCC_AHBEN_SRAMEN | RCC_AHBEN_FLASHEN | RCC_AHBEN_XMCEN;
/* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
RCC->APB2EN = RCC_APB2EN_GPIODEN | RCC_APB2EN_GPIOEEN | RCC_APB2EN_GPIOFEN | RCC_APB2EN_GPIOGEN;
/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/
/*---------------- SRAM Address lines configuration -------------------------*/
/*---------------- NOE and NWE configuration --------------------------------*/
/*---------------- NE3 configuration ----------------------------------------*/
/*---------------- NBL0, NBL1 configuration ---------------------------------*/
GPIOD->CTRLL = 0x44BB44BB;
GPIOD->CTRLH = 0xBBBBBBBB;
GPIOE->CTRLL = 0xB44444BB;
GPIOE->CTRLH = 0xBBBBBBBB;
GPIOF->CTRLL = 0x44BBBBBB;
GPIOF->CTRLH = 0xBBBB4444;
GPIOG->CTRLL = 0x44BBBBBB;
GPIOG->CTRLH = 0x44444B44;
/*---------------- XMC Configuration ---------------------------------------*/
/*---------------- Enable XMC Bank1_SRAM Bank ------------------------------*/
XMC_Bank1->BK1CTRLR[4] = 0x00001011;
XMC_Bank1->BK1CTRLR[5] = 0x00000200;
}
#endif /* DATA_IN_ExtSRAM */
#ifndef SYSCLK_FREQ_HSI
/**
* @brief Delay to wait for HSE stable.
* @note This function should be used before reading the HSESTBL flag.
* @param None
* @retval None
*/
static void WaitHseStbl(uint32_t delay)
{
uint32_t i;
for(i = 0; i < delay; i++)
;
}
#endif /* SYSCLK_FREQ_HSI */
#ifdef SYSCLK_FREQ_HSE
/**
* @brief Selects HSE as System clock source and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockToHSE(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
WaitHseStbl(HSE_STABLE_DELAY);
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV1;
/* Select HSE as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_HSE;
/* Wait till HSE is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != (uint32_t)0x04)
{
}
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_24MHz
/**
* @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo24M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
WaitHseStbl(HSE_STABLE_DELAY);
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV1;
/* PLL configuration: = (HSE / 2) * 6 = 24 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLHSEPSC_HSE_DIV2 | RCC_CFG_PLLMULT6);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
WaitHseStbl(PLL_STABLE_DELAY);
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_36MHz
/**
* @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo36M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
WaitHseStbl(HSE_STABLE_DELAY);
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV1;
/* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLHSEPSC_HSE_DIV2 | RCC_CFG_PLLMULT9);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
WaitHseStbl(PLL_STABLE_DELAY);
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_48MHz
/**
* @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo48M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
WaitHseStbl(HSE_STABLE_DELAY);
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT6);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
WaitHseStbl(PLL_STABLE_DELAY);
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_56MHz
/**
* @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo56M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
WaitHseStbl(HSE_STABLE_DELAY);
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT7);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
WaitHseStbl(PLL_STABLE_DELAY);
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
configuration. User can add here some code to deal with this error */
}
}
#elif defined SYSCLK_FREQ_72MHz
/**
* @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2
* and PCLK1 prescalers.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
static void SetSysClockTo72M(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
/* Enable HSE */
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
StartUpCounter++;
}
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
WaitHseStbl(HSE_STABLE_DELAY);
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
/* PCLK2 = HCLK */
RCC->CFG &= 0xFFFFC7FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
/* PCLK1 = HCLK/2 */
RCC->CFG &= 0xFFFFF8FF;
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
/* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT9);
/* Enable PLL */
RCC->CTRL |= RCC_CTRL_PLLEN;
/* Wait till PLL is ready */
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
{
}
WaitHseStbl(PLL_STABLE_DELAY);
}
else
{