Merge pull request #830 from lylavoie/Lanbon_L9

merge Lanbon L9

Author: fvanroie

src/drv/tft/tft_driver_arduinogfx.cpp

@@ -26,10 +26,10 @@ void ArduinoGfx::init(int w, int h)
     LOG_TRACE(TAG_TFT, F(D_SERVICE_STARTING));
 
 #if(TFT_WIDTH == 170) && (TFT_HEIGHT == 320) 
-    Arduino_DataBus *bus = new Arduino_ESP32PAR8Q(
+    Arduino_DataBus *bus = new Arduino_ESP32PAR8(
         TFT_DC, TFT_CS, TFT_WR, TFT_RD,
         TFT_D0, TFT_D1, TFT_D2, TFT_D3, TFT_D4, TFT_D5, TFT_D6, TFT_D7);
-    Arduino_GFX *gfx = new Arduino_ST7789(bus,
+    tft = new Arduino_ST7789(bus,
         TFT_RST /* RST */, TFT_ROTATION /* rotation */, true /* IPS */,
         TFT_WIDTH /* width */, TFT_HEIGHT /* height */,
         35 /* col offset 1 */, 0 /* row offset 1 */,
@@ -142,7 +142,7 @@ void ArduinoGfx::init(int w, int h)
 
     /* TFT init */
     LOG_DEBUG(TAG_TFT, F("%s - %d"), __FILE__, __LINE__);
-    tft->begin(GFX_NOT_DEFINED);
+    tft->begin(SPI_FREQUENCY);
     LOG_DEBUG(TAG_TFT, F("%s - %d"), __FILE__, __LINE__);
     // tft.setSwapBytes(true); /* set endianness */
     LOG_INFO(TAG_TFT, F(D_SERVICE_STARTED));

user_setups/esp32s3/lanbon_l9.ini

@@ -26,6 +26,7 @@ build_flags =
     ;-D TFT_INVERSION_ON
     ;-D TFT_RGB_ORDER=0       ; Colour order Blue-Green-Red
     ;-D INVERT_COLORS=1       ; for inverted colors
+    -D SPI_FREQUENCY=16000000
 
     -D TFT_RST=-1
     -D TFT_CS=21
@@ -44,12 +45,13 @@ build_flags =
     ; Touch Setttings
     -D TOUCH_WIDTH=170
     -D TOUCH_HEIGHT=320
-    -D TOUCH_DRIVER=0x911
+    -D TOUCH_DRIVER=0x6336
     -D TOUCH_SCL=0
     -D TOUCH_SDA=35
     -D TOUCH_IRQ=-1
     -D TOUCH_RST=-1
-    -D I2C_TOUCH_ADDRESS=0x5d ; or 0x14
+    -D I2C_TOUCH_ADDRESS=0x38
+    -D I2C_TOUCH_PORT=1
     -D I2C_TOUCH_FREQUENCY=400000
 ;endregion
 
@@ -60,6 +62,7 @@ lib_deps =
     ${arduino_esp32s3_v2.lib_deps}
     ${arduinogfx.lib_deps}
     ${goodix.lib_deps}
+    ${ft6336.lib_deps}
 
 lib_ignore =
     ${env.lib_ignore}