diff --git a/src/vsrc/cpu_top.sv b/src/vsrc/cpu_top.sv
index 256c1f5..ff5a547 100644
--- a/src/vsrc/cpu_top.sv
+++ b/src/vsrc/cpu_top.sv
@@ -195,6 +195,7 @@ module cpu_top
     logic [2:0] mem_cache_rd_type;
     logic [3:0] mem_cache_sel;
     logic [31:0] mem_cache_addr,mem_cache_data;
+    logic [1:0] wb_dcache_flush; // flush dcache if excp
     
     assign mem_cache_ce = mem_cache_signal[0].ce | mem_cache_signal[1].ce;
     assign mem_cache_we = mem_cache_signal[0].we | mem_cache_signal[1].we;
@@ -216,6 +217,7 @@ module cpu_top
         .wstrb     (mem_cache_sel),
         .wdata     (mem_cache_data),
         .rd_type_i (mem_cache_rd_type),
+        .flush_i    (wb_dcache_flush!=2'b0), // If excp occurs, flush DCache
         .addr_ok   (mem_addr_ok),
         .data_ok   (mem_data_ok),
         .rdata     (cache_mem_data),
@@ -642,6 +644,9 @@ module cpu_top
                 //-> tlb
                 .tlb_mem_signal(tlb_mem_signal),
 
+                // -> DCache
+                .dcache_flush_o(wb_dcache_flush[i]),
+
                 //to ctrl
                 .wb_ctrl_signal(wb_ctrl_signal[i]),
                 .ftq_id_o(wb_ctrl_ftq_id[i])
diff --git a/src/vsrc/dummy_dcache.sv b/src/vsrc/dummy_dcache.sv
index 2e8b6ee..facf391 100644
--- a/src/vsrc/dummy_dcache.sv
+++ b/src/vsrc/dummy_dcache.sv
@@ -12,6 +12,7 @@ module dummy_dcache (
     input logic [3:0] wstrb,  //写字节使能信号
     input logic [31:0] wdata,  //写数据
     input logic [2:0] rd_type_i, //读请求类型：3'b000: 字节；3'b001: 半字；3'b010: 字；3'b100：Cache行
+    input logic flush_i, // 冲刷信号，如果出于某种原因需要取消写事务，CPU拉高此信号
     output logic addr_ok,             //该次请求的地址传输OK，读：地址被接收；写：地址和数据被接收
     output logic data_ok,             //该次请求的数据传输Ok，读：数据返回；写：数据写入完成
     output logic [31:0] rdata,  //读Cache的结果
@@ -49,7 +50,7 @@ module dummy_dcache (
     end
 
     // State transition
-    always_comb begin
+    always_comb begin : transition_comb
         case (state)
             IDLE: begin
                 if (valid) begin
@@ -66,8 +67,9 @@ module dummy_dcache (
                 else next_state = READ_WAIT;
             end
             WRITE_REQ: begin
-                if (wr_rdy)
-                    next_state = IDLE; // If AXI is ready, then write req is accept this cycle, back to IDLE
+                // If AXI is ready, then write req is accept this cycle, back to IDLE
+                // If flushed, back to IDLE
+                if (wr_rdy | flush_i) next_state = IDLE;
                 else next_state = WRITE_REQ;
             end
             default: begin
@@ -95,7 +97,7 @@ module dummy_dcache (
     end
 
 
-    assign rd_type = rd_type_i ;
+    assign rd_type = rd_type_i;
     assign wr_type = 3'b010;  // word
     always_comb begin
         // Default signal
@@ -118,7 +120,10 @@ module dummy_dcache (
                 rd_addr = rd_addr_r;
             end
             WRITE_REQ: begin
-                if (wr_rdy) begin
+                if (flush_i) begin
+                    wr_req  = 0;
+                    wr_addr = 0;
+                end else if (wr_rdy) begin
                     wr_req = 1;
                     wr_addr = cpu_addr;  // DO NOT align addr, 128b -> 32b translate need info from addr
                     case (cpu_addr[3:2])
diff --git a/src/vsrc/icache.sv b/src/vsrc/icache.sv
index 05cb70e..795466a 100644
--- a/src/vsrc/icache.sv
+++ b/src/vsrc/icache.sv
@@ -180,7 +180,6 @@ module icache
     logic p1_rreq_1, p1_rreq_2;
     logic [ADDR_WIDTH-1:0] p1_raddr_1, p1_raddr_2;
     always_ff @(posedge clk) begin
-        p1_tlb_rreq <= tlb_rreq_i;
         if (rvalid_1_o | ~p1_rreq_1) begin
             p1_rreq_1  <= rreq_1_i;
             p1_raddr_1 <= raddr_1_i;
diff --git a/src/vsrc/pipeline/4_mem/mem_wb.sv b/src/vsrc/pipeline/4_mem/mem_wb.sv
index 6433e08..74f065c 100644
--- a/src/vsrc/pipeline/4_mem/mem_wb.sv
+++ b/src/vsrc/pipeline/4_mem/mem_wb.sv
@@ -33,6 +33,9 @@ module mem_wb
     // load store relate difftest
     output wb_ctrl wb_ctrl_signal,
 
+    // -> DCache
+    output logic dcache_flush_o,
+
     // <-> Frontend
     output logic [$clog2(FRONTEND_FTQ_SIZE)-1:0] ftq_id_o
 );
@@ -89,6 +92,8 @@ module mem_wb
         excp_pil, excp_pis, excp_ppi, excp_pme, excp_tlbr, excp_adem, mem_signal_o.excp_num
     };
 
+    assign dcache_flush_o = excp;
+
     // DEBUG
     logic [`RegBus] debug_mem_wdata;
     assign debug_mem_wdata = mem_signal_o.wdata;