nanopi-r1_bullseye_armhf_vmdb2-0.15.yaml

# Use like this: sudo vmdb2 nanopi-r1_bullseye_armhf_vmdb2-0.15.yaml --output nanopi-r1_bullseye_armhf.img --rootfs-tarball bullseye_armhf_rootfs.tgz --verbose --log=log.txt
steps:
  - mkimg: "{{ output }}"
    size: 3G

  - mklabel: msdos
    device: "{{ output }}"

  - mkpart: primary
    device: "{{ output }}"
    start: 16M
    end: 100%
    tag: root

  - kpartx: "{{ output }}"

  - mkfs: ext4
    partition: root

  - mount: root

  - unpack-rootfs: root

  - qemu-debootstrap: bullseye
    mirror: http://ftp.de.debian.org/debian
    target: root
    arch: armhf
    components:
    - main
    - contrib
    - non-free
    unless: rootfs_unpacked

  - apt: install
    packages:
      - initramfs-tools
    tag: root
    unless: rootfs_unpacked

  - chroot: root
    shell: |
      echo "deb http://ftp.de.debian.org/debian bullseye main contrib non-free" > /etc/apt/sources.list
      echo "deb http://security.debian.org/debian-security bullseye-security main contrib non-free" >> /etc/apt/sources.list
      echo "deb http://ftp.de.debian.org/debian bullseye-updates main contrib non-free" >> /etc/apt/sources.list
    unless: rootfs_unpacked

  - apt: install
    packages:
      - flash-kernel
    tag: root
    unless: rootfs_unpacked

  - cache-rootfs: root
    unless: rootfs_unpacked

  - chroot: root
    shell: |
      apt-get update
      apt-get -y upgrade
      mv /etc/kernel/postinst.d/initramfs-tools /etc/kernel/postinst.d/zz-flash-kernel /
      apt-get -y install linux-image-armmp-lpae
      mv /initramfs-tools /zz-flash-kernel /etc/kernel/postinst.d/

  - create-file: /etc/hostname
    contents: |+
      NanoPiR1

  - fstab: root

  - root-fs: root
    shell: |
      curl -L -o $ROOT/linux-dtb.deb https://imola.armbian.com/apt/pool/main/l/linux-5.10.16-sunxi/linux-dtb-current-sunxi_21.02.2_armhf.deb

  - create-file: /etc/kernel/postinst.d/add-armbian-dtb
    contents: |+
      #!/bin/sh -e

      version="$1"

      # passing the kernel version is required
      if [ -z "${version}" ]; then
      	echo >&2 "W: add-armbian-dtb: ${DPKG_MAINTSCRIPT_PACKAGE:-kernel package} did not pass a version number"
      	exit 2
      fi

      # only works with boards specified in /etc/flash-kerne/db, flash-kernel supported boards' dtb should be in kernel pkg
      if [ ! -e "/etc/flash-kernel/db" ]; then
      	echo >&2 "W: add-armbian-dtb: Missing /etc/flash-kernel/db, add-armbian-dtb cannot continue"
      	exit 1
      fi

      dtbfile=$(grep DTB-Id /etc/flash-kernel/db | sed "s@.*DTB-Id: @@g")

      # only works with available /boot/armbian-dtb/${dtbfile}
      if [ ! -e "/boot/armbian-dtb/${dtbfile}" ]; then
      	echo >&2 "W: add-armbian-dtb: Missing /boot/armbian-dtb/${dtbfile}, add-armbian-dtb cannot continue"
      	exit 1
      fi

      if [ -e "/lib/linux-image-${version}/${dtbfile}" ]; then
        if cmp -s /boot/armbian-dtb/${dtbfile} /lib/linux-image-${version}/${dtbfile}; then
          echo "I: ${dtbfile} imported from Armbian is already in /lib/linux-image-${version}/"
        else
          echo "I: This board is supported in this Debian kernel"
        fi
        echo "I: Skipping adding dtb imported from Armbian to new kernel"
      	exit 0
      fi

      echo "I: This board is not supported in this Debian kernel"
      echo "I: Adding ${dtbfile} imported from Armbian to /lib/linux-image-${version}/"

      cp /boot/armbian-dtb/${dtbfile} /lib/linux-image-${version}/

  - create-file: /etc/kernel/postrm.d/add-armbian-dtb
    contents: |+
      #!/bin/sh -e

      version="$1"

      # passing the kernel version is required
      if [ -z "${version}" ]; then
      	echo >&2 "W: add-armbian-dtb: ${DPKG_MAINTSCRIPT_PACKAGE:-kernel package} did not pass a version number"
      	exit 2
      fi

      # only works with boards specified in /etc/flash-kerne/db, flash-kernel supported boards' dtb should be in kernel pkg
      if [ ! -e "/etc/flash-kernel/db" ]; then
      	echo >&2 "W: add-armbian-dtb: Missing /etc/flash-kernel/db, add-armbian-dtb cannot continue"
      	exit 1
      fi

      dtbfile=$(grep DTB-Id /etc/flash-kernel/db | sed "s@.*DTB-Id: @@g")

      # only works with available /boot/armbian-dtb/${dtbfile}
      if [ ! -e "/boot/armbian-dtb/${dtbfile}" ]; then
      	echo >&2 "W: add-armbian-dtb: Missing /boot/armbian-dtb/${dtbfile}, add-armbian-dtb cannot continue"
      	exit 1
      fi

      if [ ! -e "/lib/linux-image-${version}/${dtbfile}" ]; then
      	exit 0
      fi

      if cmp -s /boot/armbian-dtb/${dtbfile} /lib/linux-image-${version}/${dtbfile}; then
        echo "I: Removing Armbian's ${dtbfile} from /lib/linux-image-${version}/ added on kernel install"
        rm /lib/linux-image-${version}/${dtbfile}
      else
        echo "I: ${dtbfile} in /lib/linux-image-${version}/ is not Armbian's"
        echo "I: Skipping removing dtb imported from Armbian from /lib/linux-image-${version}/"
      fi

  - chroot: root
    shell: |
      dpkg -i linux-dtb.deb
      mkdir -p /boot/armbian-dtb
      cp /boot/dtb-5.10.16-sunxi/sun8i-h3-nanopi-r1.dtb /boot/armbian-dtb/
      dpkg -P linux-dtb-current-sunxi
      rm linux-dtb.deb
      chmod +x /etc/kernel/postinst.d/add-armbian-dtb
      chmod +x /etc/kernel/postrm.d/add-armbian-dtb
      cp /boot/armbian-dtb/sun8i-h3-nanopi-r1.dtb /usr/lib/linux-image-$(ls -l /vmlinuz | sed "s%^.*vmlinuz-\(.*\)$%\1%g")/

  - create-dir: /lib/firmware/brcm

  - create-file: /lib/firmware/brcm/brcmfmac43430-sdio.txt
    contents: |+
      #AP6212_NVRAM_V1.0_20140603
      # 2.4 GHz, 20 MHz BW mode

      # The following parameter values are just placeholders, need to be updated.
      manfid=0x2d0
      prodid=0x0726
      vendid=0x14e4
      devid=0x43e2
      boardtype=0x0726
      boardrev=0x1101
      boardnum=22
      macaddr=00:90:4c:c5:12:38
      sromrev=11
      boardflags=0x00404201
      xtalfreq=26000
      nocrc=1
      ag0=255
      aa2g=1
      ccode=ALL

      pa0itssit=0x20
      extpagain2g=0

      #PA parameters for 2.4GHz, measured at CHIP OUTPUT
      pa2ga0=-168,7161,-820
      AvVmid_c0=0x0,0xc8
      cckpwroffset0=5

      # PPR params
      maxp2ga0=90
      txpwrbckof=6
      cckbw202gpo=0x5555
      legofdmbw202gpo=0x77777777
      mcsbw202gpo=0xaaaaaaaa

      # OFDM IIR :
      ofdmdigfilttype=7
      # PAPD mode:
      papdmode=2

      il0macaddr=00:90:4c:c5:12:38
      wl0id=0x431b

      #OOB parameters
      hostwake=0x40
      hostrdy=0x41
      usbrdy=0x03
      usbrdydelay=100
      deadman_to=0xffffffff
      # muxenab: 0x1 for UART enable, 0x10 for Host awake
      muxenab=0x10
      # CLDO PWM voltage settings - 0x4 - 1.1 volt
      #cldo_pwm=0x4

  - create-file: /etc/flash-kernel/db
    contents: |+
      Machine: FriendlyElec NanoPi-R1
      Kernel-Flavors: armmp armmp-lpae
      Boot-Script-Path: /boot/boot.scr
      DTB-Id: sun8i-h3-nanopi-r1.dtb
      U-Boot-Script-Name: bootscr.sunxi
      Required-Packages: u-boot-tools

  - create-file: /etc/flash-kernel/machine
    contents: |+
      FriendlyElec NanoPi-R1

  - chroot: root
    shell: |
      apt-get -y install wireless-regdb firmware-brcm80211
      apt-get -y install crda

      # Add hostname to /etc/hosts for IPv4 & IPv6
      HOSTNAME=$(cat /etc/hostname)
      sed -i "2i127.0.0.2\t$HOSTNAME" /etc/hosts
      sed -i "4i::2\t\t$HOSTNAME" /etc/hosts

      sed -i "s@errors=remount-ro@noatime,nodiratime,errors=remount-ro@g" /etc/fstab

      sed -i "s@quiet@root=$(grep ^UUID /etc/fstab | cut -d \  -f 1) net.ifnames=0@g" /etc/default/flash-kernel

      # Back-up fsck
      mv /usr/share/initramfs-tools/hooks/fsck /usr/share/initramfs-tools/hooks/fsck.bak
      chmod -x /usr/share/initramfs-tools/hooks/fsck.bak

      # Fix fsck to read root fstype in fstab
      sed "s@\[.*\"\/\".*|| @@g" /usr/share/initramfs-tools/hooks/fsck.bak > /usr/share/initramfs-tools/hooks/fsck
      chmod +x /usr/share/initramfs-tools/hooks/fsck

      update-initramfs -c -k $(ls -l /vmlinuz | sed "s%^.*vmlinuz-\(.*\)$%\1%g")

      sed -i "s@root:\*:@root::@g" /etc/shadow

  - root-fs: root
    shell: |
      curl -L -o $ROOT/u-boot.deb https://imola.armbian.com/apt/pool/main/l/linux-u-boot-nanopi-r1-current/linux-u-boot-current-nanopi-r1_21.05.1_armhf.deb

  - chroot: root
    shell: |
      dpkg -i u-boot.deb
      rm u-boot.deb

  - root-fs: root
    shell: |
      dd conv=fsync,notrunc if=$ROOT/usr/lib/linux-u-boot-current-nanopi-r1_21.05.1_armhf/u-boot-sunxi-with-spl.bin of={{ output }} bs=1024 seek=8

  - create-file: /etc/network/interfaces.d/lo
    contents: |+
      auto lo
      iface lo inet loopback

  - create-file: /etc/network/interfaces.d/eth0
    contents: |+
      auto eth0
      iface eth0 inet dhcp

  - create-file: /etc/network/interfaces.d/eth1
    contents: |+
      auto eth1
      iface eth1 inet dhcp

  - root-fs: root
    shell: |
      test -e vmdb2-ansible.yaml || ln -s vmdb2-ansible.yaml.example vmdb2-ansible.yaml
      mount -t proc proc $ROOT/proc

# The "ansible" directive is non-functional in Debian 12 Bookworm.
#
# Since Ansible in Debian Bookworm is version 2.14, UTF8 is mandatory :
# https://docs.ansible.com/ansible/devel/porting_guides/porting_guide_7.html#command-line
#
# This is taken into account in vmdb2 0.27, see 5th bullet point in 0.27 section, here :
# http://git.liw.fi/vmdb2/tree/NEWS
#
# Unfortunately, Bookworm uses vmdb2 0.26, which has UTF8 missing when calling vmdb2.
# To fix that in Bookworm, we call the ansible-playbook command directly.

# This directive is commented for now (Bookworm)
#  - ansible: root
#    playbook: vmdb2-ansible.yaml
# Will be uncommented when Debian 13 Trixie becomes stable

# This directive bloc should be removed when Debian 13 Trixie becomes stable
  - root-fs: root
    shell: |
      echo "[image]" > /tmp/tmpinvvmdb2ansible
      echo "$ROOT" >> /tmp/tmpinvvmdb2ansible
      LC_ALL=C.UTF8 ansible-playbook -c chroot -i /tmp/tmpinvvmdb2ansible --tags all vmdb2-ansible.yaml
      rm /tmp/tmpinvvmdb2ansible

  - root-fs: root
    shell: |
      # Restore fsck
      mv $ROOT/usr/share/initramfs-tools/hooks/fsck.bak $ROOT/usr/share/initramfs-tools/hooks/fsck
      chmod +x $ROOT/usr/share/initramfs-tools/hooks/fsck

      umount $ROOT/proc
      rm $ROOT/etc/flash-kernel/machine

  - create-file: /etc/resolv.conf
    contents: |