Register

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/30900

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.0 -m "<description of version>" feff22cb00798edcbecd223e6451c78fff42c0ae
git push origin v0.1.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/30900

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.0 -m "<description of version>" b3375be91b6e16a81ad6ec6bc9f53e2e2bee8ff1
git push origin v0.1.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/30900

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.0 -m "<description of version>" 2aef74936f9e962dcfc81e1fdefabbbb586aad09
git push origin v0.1.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/31268

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.3 -m "<description of version>" c91fd37fd4d5d9f1b2694ed3a723be3d1726a8f9
git push origin v0.1.3

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/31328

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.6 -m "<description of version>" 7e36fe5a2e075a3896ba5b920d928aa63fe73c2a
git push origin v0.1.6

Also, note the warning: Version 0.1.6 skips over 0.1.4
This can be safely ignored. However, if you want to fix this you can do so. Call register() again after making the fix. This will update the Pull request.

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/31330

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.4 -m "<description of version>" e2cabe555506801528598c5acbe1d6b57a0a5c42
git push origin v0.1.4

[MasonProtter]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/31590

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.5 -m "<description of version>" d4e841ff4cbab9a0241277018bdd5a4dad9f53fc
git push origin v0.1.5

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/31696

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.6 -m "<description of version>" d03b452f94a9f9f1418cb30345290d2d0c6a2df6
git push origin v0.1.6

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/33575

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.15 -m "<description of version>" c279db18cba8e2650de94c52e8f2911b5805e76c
git push origin v0.1.15

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/33720

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.16 -m "<description of version>" 27eca59a219aa8b5eb07620f59fdf907c9af905b
git push origin v0.1.16

[ChrisRackauckas]

@JuliaRegistrator register()

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/116149

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v6.13.1 -m "<description of version>" b3ce057ac40112cd4ef997b983aee81faae85b1d
git push origin v6.13.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/117118

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v6.14.0 -m "<description of version>" 76c1d8258a05dc8562c7086b0e806076be41938a
git push origin v6.14.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/117422

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v6.14.1 -m "<description of version>" 4fa78cc0c4fb7c9b5b66549ba726cf578a38f610
git push origin v6.14.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/117619

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v6.15.0 -m "<description of version>" ab3ecdc97ce43cf42335a0cbb35d9e05b7f1f2f5
git push origin v6.15.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/117619

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v6.15.0 -m "<description of version>" ab3ecdc97ce43cf42335a0cbb35d9e05b7f1f2f5
git push origin v6.15.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/117672

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v6.15.1 -m "<description of version>" 6a195b4b833d65d09bda6e0145840d10e19c79f1
git push origin v6.15.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/117735

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v6.15.2 -m "<description of version>" 9f19dba72bc975622aae09407ec21ec523a323e9
git push origin v6.15.2

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/117747

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v6.15.3 -m "<description of version>" 10a61ee505038f4faaf9e1edbcda1caeed8d4cc7
git push origin v6.15.3

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/118032

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v6.15.4 -m "<description of version>" fbf13ecb8344031a27c1299b42b478c5c3349f6c
git push origin v6.15.4

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/118126

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v6.16.0 -m "<description of version>" c3f54a60c3b708ed33411a431d040de3a02d5f3d
git push origin v6.16.0