diff --git a/CMakeLists.txt b/CMakeLists.txt
index 57ec20e..2ce4b03 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -17,7 +17,7 @@ if(NOT DEFINED slicersources_SOURCE_DIR)
   # Download Slicer sources and set variables slicersources_SOURCE_DIR and slicersources_BINARY_DIR
   FetchContent_Populate(slicersources
     GIT_REPOSITORY https://github.com/jcfr/Slicer
-    GIT_TAG        e08d28f2e8ced063b55c541142be86e10a94f218 # slicersalt-4.9-2018-09-13-8c19c293c
+    GIT_TAG        cd7d51ce9b613bdf966281d9a841017473ec0c07 # slicersalt-4.9-2018-09-13-8c19c293c
     GIT_PROGRESS   1
     )
 else()
diff --git a/SuperBuild/External_SPHARM-PDM.cmake b/SuperBuild/External_SPHARM-PDM.cmake
index 73d9bbb..8033f54 100644
--- a/SuperBuild/External_SPHARM-PDM.cmake
+++ b/SuperBuild/External_SPHARM-PDM.cmake
@@ -53,8 +53,8 @@ if(NOT DEFINED ${proj}_DIR AND NOT ${CMAKE_PROJECT_NAME}_USE_SYSTEM_${proj})
   set(${proj}_PACKAGE_DIR ${${proj}_DIR}/${proj}-build)
   ExternalProject_Add(${proj}
     ${${proj}_EP_ARGS}
-    GIT_REPOSITORY "${EP_GIT_PROTOCOL}://github.com/NIRALUser/SPHARM-PDM.git"
-    GIT_TAG "ed916619c03b4e14ed7700a5d1b9c084472b2a4b" # 2018-09-14
+    GIT_REPOSITORY "${EP_GIT_PROTOCOL}://github.com/jcfr/SPHARM-PDM.git"
+    GIT_TAG "09407a2549d601164b06cd9f41df7b97f37a35e7" # slicersalt-2018-09-14-ed916619c
     SOURCE_DIR ${CMAKE_BINARY_DIR}/${proj}
     BINARY_DIR ${${proj}_DIR}
     INSTALL_COMMAND ${CMAKE_COMMAND} --build ${${proj}_PACKAGE_DIR} --config ${config} --target package
@@ -71,6 +71,7 @@ if(NOT DEFINED ${proj}_DIR AND NOT ${CMAKE_PROJECT_NAME}_USE_SYSTEM_${proj})
       -DSlicer_DIR:PATH=${Slicer_INNER_BUILD_DIR}
       # Options
       -D${proj}_BUILD_SLICER_EXTENSION:BOOL=ON
+      -DBUILD_TESTING:BOOL=OFF
     DEPENDS
       ${${proj}_DEPENDENCIES}
     )
diff --git a/SuperBuild/External_ShapePopulationViewer.cmake b/SuperBuild/External_ShapePopulationViewer.cmake
index 5f82e4a..ea36d25 100644
--- a/SuperBuild/External_ShapePopulationViewer.cmake
+++ b/SuperBuild/External_ShapePopulationViewer.cmake
@@ -53,8 +53,8 @@ if(NOT DEFINED ${proj}_DIR AND NOT ${CMAKE_PROJECT_NAME}_USE_SYSTEM_${proj})
   set(${proj}_PACKAGE_DIR ${${proj}_DIR})
   ExternalProject_Add(${proj}
     ${${proj}_EP_ARGS}
-    GIT_REPOSITORY "${EP_GIT_PROTOCOL}://github.com/NIRALUser/ShapePopulationViewer.git"
-    GIT_TAG "76d356d44f0d0bc9f4901b05452d692d846c2636" # 2018-09-14
+    GIT_REPOSITORY "${EP_GIT_PROTOCOL}://github.com/jcfr/ShapePopulationViewer.git"
+    GIT_TAG "3a39e526238f5b5f55928e41369f9a4cb751d145" # slicersalt-2018-09-14-76d356d44
     SOURCE_DIR ${CMAKE_BINARY_DIR}/${proj}
     BINARY_DIR ${${proj}_DIR}
     INSTALL_COMMAND ${CMAKE_COMMAND} --build ${${proj}_PACKAGE_DIR} --config ${config} --target package
@@ -71,6 +71,7 @@ if(NOT DEFINED ${proj}_DIR AND NOT ${CMAKE_PROJECT_NAME}_USE_SYSTEM_${proj})
       -DSlicer_DIR:PATH=${Slicer_INNER_BUILD_DIR}
       # Options
       -D${proj}_BUILD_SLICER_EXTENSION:BOOL=ON
+      -DBUILD_TESTING:BOOL=OFF
     DEPENDS
       ${${proj}_DEPENDENCIES}
     )
diff --git a/SuperBuild/External_ShapeRegressionExtension.cmake b/SuperBuild/External_ShapeRegressionExtension.cmake
index 582b94d..3eaef2b 100644
--- a/SuperBuild/External_ShapeRegressionExtension.cmake
+++ b/SuperBuild/External_ShapeRegressionExtension.cmake
@@ -22,7 +22,9 @@
 set(proj ShapeRegressionExtension)
 
 # Set dependency list
-set(${proj}_DEPENDENCIES "")
+set(${proj}_DEPENDENCIES
+  shape4D
+  )
 
 # Include dependent projects if any
 ExternalProject_Include_Dependencies(${proj}
@@ -53,8 +55,8 @@ if(NOT DEFINED ${proj}_DIR AND NOT ${CMAKE_PROJECT_NAME}_USE_SYSTEM_${proj})
   set(${proj}_PACKAGE_DIR ${${proj}_DIR}/${proj}-build)
   ExternalProject_Add(${proj}
     ${${proj}_EP_ARGS}
-    GIT_REPOSITORY "${EP_GIT_PROTOCOL}://github.com/KitwareMedical/ShapeRegressionExtension.git"
-    GIT_TAG "983564f9cdd51cfcb3e35ab26e15d7db314b7d54 " # 2018-09-13 (master)
+    GIT_REPOSITORY "${EP_GIT_PROTOCOL}://github.com/jcfr/ShapeRegressionExtension.git"
+    GIT_TAG "35bbc25d185689bdf71798e7a6ff212873dc4969 " # 2018-09-13 (master)
     SOURCE_DIR ${CMAKE_BINARY_DIR}/${proj}
     BINARY_DIR ${${proj}_DIR}
     INSTALL_COMMAND ${CMAKE_COMMAND} --build ${${proj}_PACKAGE_DIR} --config ${config} --target package
@@ -71,6 +73,7 @@ if(NOT DEFINED ${proj}_DIR AND NOT ${CMAKE_PROJECT_NAME}_USE_SYSTEM_${proj})
       -DSlicer_DIR:PATH=${Slicer_INNER_BUILD_DIR}
       # Options
       -D${proj}_BUILD_SLICER_EXTENSION:BOOL=ON
+      -DBUILD_TESTING:BOOL=OFF
     DEPENDS
       ${${proj}_DEPENDENCIES}
     )
diff --git a/SuperBuild/External_shape4D.cmake b/SuperBuild/External_shape4D.cmake
new file mode 100644
index 0000000..7d7848a
--- /dev/null
+++ b/SuperBuild/External_shape4D.cmake
@@ -0,0 +1,86 @@
+#============================================================================
+#
+# Copyright (c) Kitware, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0.txt
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#============================================================================
+#
+# External project for the project.
+#
+
+set(proj shape4D)
+
+# Set dependency list
+set(${proj}_DEPENDENCIES
+  ""
+  )
+
+# Include dependent projects if any
+ExternalProject_Include_Dependencies(${proj}
+  PROJECT_VAR proj
+  DEPENDS_VAR ${proj}_DEPENDENCIES
+  SUPERBUILD_VAR Slicer_SUPERBUILD
+  )
+
+list(APPEND ${proj}_DEPENDENCIES Slicer)
+
+if(${CMAKE_PROJECT_NAME}_USE_SYSTEM_${proj})
+  message(FATAL_ERROR "Enabling ${CMAKE_PROJECT_NAME}_USE_SYSTEM_${proj} is not supported !")
+endif()
+
+# Sanity checks
+if(DEFINED ${proj}_DIR AND NOT EXISTS ${${proj}_DIR})
+  message(FATAL_ERROR "${proj}_DIR variable is defined but corresponds to non-existing directory")
+endif()
+
+if(NOT DEFINED ${proj}_DIR AND NOT ${CMAKE_PROJECT_NAME}_USE_SYSTEM_${proj})
+
+  set(config ${CMAKE_BUILD_TYPE})
+  if(DEFINED CMAKE_CONFIGURATION_TYPES)
+    set(config ${CMAKE_CFG_INTDIR})
+  endif()
+
+  set(${proj}_DIR ${CMAKE_BINARY_DIR}/${proj}-build)
+  set(${proj}_PACKAGE_DIR ${${proj}_DIR}/${proj}-build)
+  ExternalProject_Add(${proj}
+    ${${proj}_EP_ARGS}
+    GIT_REPOSITORY "${EP_GIT_PROTOCOL}://github.com/jcfr/shape4D.git"
+    GIT_TAG "3f47cf711a3d21a441c1e46ea992b0f0480b5cf8" # slicersalt-2018-01-22-c74c766a4c
+    SOURCE_DIR ${CMAKE_BINARY_DIR}/${proj}
+    BINARY_DIR ${${proj}_DIR}
+    INSTALL_COMMAND ${CMAKE_COMMAND} --build ${${proj}_PACKAGE_DIR} --config ${config} --target package
+    CMAKE_CACHE_ARGS
+      # Compiler settings
+      -DCMAKE_C_COMPILER:FILEPATH=${CMAKE_C_COMPILER}
+      -DCMAKE_C_FLAGS:STRING=${ep_common_c_flags}
+      -DCMAKE_CXX_COMPILER:FILEPATH=${CMAKE_CXX_COMPILER}
+      -DCMAKE_CXX_FLAGS:STRING=${ep_common_cxx_flags}
+      -DCMAKE_CXX_STANDARD:STRING=${CMAKE_CXX_STANDARD}
+      -DCMAKE_CXX_STANDARD_REQUIRED:BOOL=${CMAKE_CXX_STANDARD_REQUIRED}
+      -DCMAKE_CXX_EXTENSIONS:BOOL=${CMAKE_CXX_EXTENSIONS}
+      # Dependencies
+      -DSlicer_DIR:PATH=${Slicer_INNER_BUILD_DIR}
+      # Options
+      -D${proj}_BUILD_SLICER_EXTENSION:BOOL=ON
+      -DBUILD_TESTING:BOOL=OFF
+    DEPENDS
+      ${${proj}_DEPENDENCIES}
+    )
+
+  list(APPEND ${APPLICATION_NAME}_EXTENSION_CPACK_PACKAGE_DIRS
+    ${${proj}_PACKAGE_DIR}/_CPack_Packages
+    )
+else()
+  ExternalProject_Add_Empty(${proj} DEPENDS ${${proj}_DEPENDENCIES})
+endif()
diff --git a/SuperBuild/SlicerPackageExtensions.cmake b/SuperBuild/SlicerPackageExtensions.cmake
index b4f4864..a6e1bfa 100644
--- a/SuperBuild/SlicerPackageExtensions.cmake
+++ b/SuperBuild/SlicerPackageExtensions.cmake
@@ -28,6 +28,7 @@ set(proj SlicerPackageExtensions)
 set(${proj}_EXTENSIONS
   SPHARM-PDM
   ShapePopulationViewer
+  shape4D
   ShapeRegressionExtension
   )