Skip to content
This repository has been archived by the owner on Sep 19, 2024. It is now read-only.

Latest commit

 

History

History
88 lines (55 loc) · 3.29 KB

apps.stream.md

File metadata and controls

88 lines (55 loc) · 3.29 KB
Raw

Simple LoRaWAN Data streaming application

1. Description

This application automatically submits a Join-Request to the LoRa Network Server.

Data is periodically streamed once the Join-Accept is received.

2. Configuration

2.1. LoRaWAN configuration

The main_stream.h header file define several constants which value can be set to define the LoRaWAN configuration of the application.

Constant Comments
LORAWAN_REGION_USED Select the regulatory region.
LORAWAN_CLASS_USED LoRaWAN device class.
LORAWAN_DUTYCYCLE_ON Enable/disable the Duty Cycle
LORAWAN_DEFAULT_DATARATE Selection of the Data Rate

Supported values for LORAWAN_REGION_USED:

  • LR1110_LORAWAN_REGION_EU868 (default)
  • LR1110_LORAWAN_REGION_US915
  • LR1110_LORAWAN_REGION_AU915
  • LR1110_LORAWAN_REGION_CN470
  • LR1110_LORAWAN_REGION_AS923_GRP1
  • LR1110_LORAWAN_REGION_AS923_GRP2
  • LR1110_LORAWAN_REGION_AS923_GRP3
  • LR1110_LORAWAN_REGION_IN865
  • LR1110_LORAWAN_REGION_KR920
  • LR1110_LORAWAN_REGION_RU864

Supported values for LORAWAN_CLASS_USED:

  • LR1110_LORAWAN_CLASS_A (default)
  • LR1110_LORAWAN_CLASS_C

Supported values for LORAWAN_DEFAULT_DATARATE:

  • LR1110_MODEM_ADR_PROFILE_NETWORK_SERVER_CONTROLLED (default)
  • LR1110_MODEM_ADR_PROFILE_MOBILE_LONG_RANGE
  • LR1110_MODEM_ADR_PROFILE_MOBILE_LOW_POWER
  • LR1110_MODEM_ADR_PROFILE_CUSTOM

When LORAWAN_DEFAULT_DATARATE is set to LR1110_MODEM_ADR_PROFILE_CUSTOM then a list of Data Rates must be provided to lr1110_modem_set_adr_profile(). See the example of adr_custom_list in main_stream.h.

2.2. Join configuration

The LR1110 is pre-provisioned with a ChipEUI/DevEUI and a JoinEUI. The application will use these identifiers if the USE_PRODUCTION_KEYS is equal to one.

Alternatively, you can provide your own EUIs in Inc/apps/lorawan_commissioning/lorawan_commissioning.h by setting USE_PRODUCTION_KEYS to any other value and by changing the values of LORAWAN_DEVICE_EUI and LORAWAN_JOIN_EUI and LORAWAN_APP_KEY.

2.3. Stream configuration

The APP_STREAM_PERIOD constant in main_stream.h defines the stream transmission period, in milliseconds.

The TRACKER_STREAM_REDUNDANCY_RATE configures the stream redundancy rate.

3. Usage

3.1. Serial console

The application requires no user intervention after the static configuration option have been set.

Information messages are displayed on the serial console, starting with the DevEUI, AppEUI/JoinEUI and PIN that you might need to register your device with the LoRa Cloud Device Join service.

4. Miscellaneous

4.1. Application main loop

The application puts the STM32 MCU to sleep after setting an alarm. When the alarm triggers, it wakes the MCU that processes the event before going back to sleep. The alarm period is the same as the send period, so each time the system wakes up is send a frame.

Application State Machine

4.2. LEDs

There are three LEDs on the LR1110 shield:

  • RX (green)
  • TX (red)

The application uses the LEDs of the LoRa Edge Tracker Reference Design to display the following events:

  • application startup: all two LEDs blink
  • uplink frame sent: the TX LED flashes once
  • downlink frame received: the RX LED flashes once