sample-acbc.conf

[Application Options]

# ------------------------------------------------------------------------------
# Data settings
# ------------------------------------------------------------------------------

# The directory to store data such as the block chain and peer addresses.  The
# block chain takes several GB, so this location must have a lot of free space.
# The default is ~/.btcd/data on POSIX OSes, $LOCALAPPDATA/Btcd/data on Windows,
# ~/Library/Application Support/Btcd/data on Mac OS, and $home/btcd/data on
# Plan9.  Environment variables are expanded so they may be used.  NOTE: Windows
# environment variables are typically %VARIABLE%, but they must be accessed with
# $VARIABLE here.  Also, ~ is expanded to $LOCALAPPDATA on Windows.
# datadir=~/.btcd/data


# ------------------------------------------------------------------------------
# Network settings
# ------------------------------------------------------------------------------

# Use testnet.
# testnet=1

# Connect via a SOCKS5 proxy.  NOTE: Specifying a proxy will disable listening
# for incoming connections unless listen addresses are provided via the 'listen'
# option.
# proxy=127.0.0.1:9050
# proxyuser=
# proxypass=

# The SOCKS5 proxy above is assumed to be Tor (https://www.torproject.org).
# If the proxy is not tor the following may be used to prevent using tor
# specific SOCKS queries to lookup addresses (this increases anonymity when tor
# is used by preventing your IP being leaked via DNS).
# noonion=1

# Use an alternative proxy to connect to .onion addresses. The proxy is assumed
# to be a Tor node. Non .onion addresses will be contacted with the main proxy
# or without a proxy if none is set.
# onion=127.0.0.1:9051
# onionuser=
# onionpass=

# Enable Tor stream isolation by randomizing proxy user credentials resulting in
# Tor creating a new circuit for each connection.  This makes it more difficult
# to correlate connections.
# torisolation=1

# Use Universal Plug and Play (UPnP) to automatically open the listen port
# and obtain the external IP address from supported devices.  NOTE: This option
# will have no effect if exernal IP addresses are specified.
# upnp=1

# Specify the external IP addresses your node is listening on.  One address per
# line.  btcd will not contact 3rd-party sites to obtain external ip addresses.
# This means if you are behind NAT, your node will not be able to advertise a
# reachable address unless you specify it here or enable the 'upnp' option (and
# have a supported device).
# externalip=1.2.3.4
# externalip=2002::1234

# ******************************************************************************
# Summary of 'addpeer' versus 'connect'.
#
# Only one of the following two options, 'addpeer' and 'connect', may be
# specified.  Both allow you to specify peers that you want to stay connected
# with, but the behavior is slightly different.  By default, btcd will query DNS
# to find peers to connect to, so unless you have a specific reason such as
# those described below, you probably won't need to modify anything here.
#
# 'addpeer' does not prevent connections to other peers discovered from
# the peers you are connected to and also lets the remote peers know you are
# available so they can notify other peers they can to connect to you.  This
# option might be useful if you are having problems finding a node for some
# reason (perhaps due to a firewall).
#
# 'connect', on the other hand, will ONLY connect to the specified peers and
# no others.  It also disables listening (unless you explicitly set listen
# addresses via the 'listen' option) and DNS seeding, so you will not be
# advertised as an available peer to the peers you connect to and won't accept
# connections from any other peers.  So, the 'connect' option effectively allows
# you to only connect to "trusted" peers.
# ******************************************************************************

# Add persistent peers to connect to as desired.  One peer per line.
# You may specify each IP address with or without a port.  The default port will
# be added automatically if one is not specified here.
# addpeer=192.168.1.1
# addpeer=10.0.0.2:8333
# addpeer=fe80::1
# addpeer=[fe80::2]:8333

# Add persistent peers that you ONLY want to connect to as desired.  One peer
# per line.  You may specify each IP address with or without a port.  The
# default port will be added automatically if one is not specified here.
# NOTE: Specifying this option has other side effects as described above in
# the 'addpeer' versus 'connect' summary section.
# connect=192.168.1.1
# connect=10.0.0.2:8333
# connect=fe80::1
# connect=[fe80::2]:8333

# Maximum number of inbound and outbound peers.
# maxpeers=125

# Disable banning of misbehaving peers.
# nobanning=1

# Maximum allowed ban score before disconnecting and banning misbehaving peers.
# banthreshold=100

# How long to ban misbehaving peers. Valid time units are {s, m, h}.
# Minimum 1s.
# banduration=24h
# banduration=11h30m15s

# Add whitelisted IP networks and IPs. Connected peers whose IP matches a
# whitelist will not have their ban score increased.
# whitelist=127.0.0.1
# whitelist=::1
# whitelist=192.168.0.0/24
# whitelist=fd00::/16

# Disable DNS seeding for peers.  By default, when btcd starts, it will use
# DNS to query for available peers to connect with.
# nodnsseed=1

# Specify the interfaces to listen on.  One listen address per line.
# NOTE: The default port is modified by some options such as 'testnet', so it is
# recommended to not specify a port and allow a proper default to be chosen
# unless you have a specific reason to do otherwise.
# All interfaces on default port (this is the default):
#  listen=
# All ipv4 interfaces on default port:
#  listen=0.0.0.0
# All ipv6 interfaces on default port:
#   listen=::
# All interfaces on port 8333:
#   listen=:8333
# All ipv4 interfaces on port 8333:
#   listen=0.0.0.0:8333
# All ipv6 interfaces on port 8333:
#   listen=[::]:8333
# Only ipv4 localhost on port 8333:
#   listen=127.0.0.1:8333
# Only ipv6 localhost on port 8333:
#   listen=[::1]:8333
# Only ipv4 localhost on non-standard port 8336:
#   listen=127.0.0.1:8336
# All interfaces on non-standard port 8336:
#   listen=:8336
# All ipv4 interfaces on non-standard port 8336:
#   listen=0.0.0.0:8336
# All ipv6 interfaces on non-standard port 8336:
#   listen=[::]:8336

# Disable listening for incoming connections.  This will override all listeners.
# nolisten=1

# Disable peer bloom filtering.  See BIP0111.
# nopeerbloomfilters=1

# Add additional checkpoints. Format: '<height>:<hash>'
# addcheckpoint=<height>:<hash>

# Add comments to the user agent that is advertised to peers.
# Must not include characters '/', ':', '(' and ')'.
# uacomment=

# Disable committed peer filtering (CF).
# nocfilters=1

# ------------------------------------------------------------------------------
# RPC server options - The following options control the built-in RPC server
# which is used to control and query information from a running btcd process.
#
# NOTE: The RPC server is disabled by default if rpcuser AND rpcpass, or
# rpclimituser AND rpclimitpass, are not specified.
# ------------------------------------------------------------------------------

# Secure the RPC API by specifying the username and password.  You can also
# specify a limited username and password.  You must specify at least one
# full set of credentials - limited or admin - or the RPC server will
# be disabled.

  rpcuser=jajimeidou
  rpcpass=12345678
  rpclimituser=jiajimeidoulimit
  rpclimitpass=12345678

# Specify the interfaces for the RPC server listen on.  One listen address per
# line.  NOTE: The default port is modified by some options such as 'testnet',
# so it is recommended to not specify a port and allow a proper default to be
# chosen unless you have a specific reason to do otherwise.  By default, the
# RPC server will only listen on localhost for IPv4 and IPv6.
# All interfaces on default port:
#   rpclisten=
# All ipv4 interfaces on default port:
#   rpclisten=0.0.0.0
# All ipv6 interfaces on default port:
#   rpclisten=::
# All interfaces on port 8334:
#   rpclisten=:8334
# All ipv4 interfaces on port 8334:
#   rpclisten=0.0.0.0:8334
# All ipv6 interfaces on port 8334:
#   rpclisten=[::]:8334
# Only ipv4 localhost on port 8334:
#   rpclisten=127.0.0.1:8334
# Only ipv6 localhost on port 8334:
#   rpclisten=[::1]:8334
# Only ipv4 localhost on non-standard port 8337:
#   rpclisten=127.0.0.1:8337
# All interfaces on non-standard port 8337:
#   rpclisten=:8337
# All ipv4 interfaces on non-standard port 8337:
#   rpclisten=0.0.0.0:8337
# All ipv6 interfaces on non-standard port 8337:
#   rpclisten=[::]:8337

# Specify the maximum number of concurrent RPC clients for standard connections.
# rpcmaxclients=10

# Specify the maximum number of concurrent RPC websocket clients.
# rpcmaxwebsockets=25

# Mirror some JSON-RPC quirks of Bitcoin Core -- NOTE: Discouraged unless
# interoperability issues need to be worked around
# rpcquirks=1

# Use the following setting to disable the RPC server even if the rpcuser and
# rpcpass are specified above.  This allows one to quickly disable the RPC
# server without having to remove credentials from the config file.
# norpc=1

# Use the following setting to disable TLS for the RPC server.  NOTE: This
# option only works if the RPC server is bound to localhost interfaces (which is
# the default).
# notls=1


# ------------------------------------------------------------------------------
# Mempool Settings - The following options
# ------------------------------------------------------------------------------

# Set the minimum transaction fee to be considered a non-zero fee,
# minrelaytxfee=0.00001

# Rate-limit free transactions to the value 15 * 1000 bytes per
# minute.
# limitfreerelay=15

# Require high priority for relaying free or low-fee transactions.
# norelaypriority=0

# Limit orphan transaction pool to 100 transactions.
# maxorphantx=100

# Do not accept transactions from remote peers.
# blocksonly=1

# Relay non-standard transactions regardless of default network settings.
# relaynonstd=1

# Reject non-standard transactions regardless of default network settings.
# rejectnonstd=1


# ------------------------------------------------------------------------------
# Optional Indexes
# ------------------------------------------------------------------------------

# Build and maintain a full hash-based transaction index which makes all
# transactions available via the getrawtransaction RPC.
# txindex=1

# Build and maintain a full address-based transaction index which makes the
# searchrawtransactions RPC available.
# addrindex=1

# Delete the entire address index on start up, then exit.
# dropaddrindex=0


# ------------------------------------------------------------------------------
# Signature Verification Cache
# ------------------------------------------------------------------------------

# Limit the signature cache to a max of 50000 entries.
# sigcachemaxsize=50000


# ------------------------------------------------------------------------------
# Coin Generation (Mining) Settings - The following options control the
# generation of block templates used by external mining applications through RPC
# calls as well as the built-in CPU miner (if enabled).
# ------------------------------------------------------------------------------

# Enable built-in CPU mining.
#
# NOTE: This is typically only useful for testing purposes such as testnet or
# simnet since the difficulty on mainnet is far too high for CPU mining to be
# worth your while.
# generate=false

# Add addresses to pay mined blocks to for CPU mining and potentially in the
# block templates generated for the getblocktemplate RPC.  One address per line.
# miningaddr=1yourbitcoinaddress
# miningaddr=1yourbitcoinaddress2
# miningaddr=1yourbitcoinaddress3

# Specify the minimum block size in bytes to create.  By default, only
# transactions which have enough fees or a high enough priority will be included
# in generated block templates.  Specifying a minimum block size will instead
# attempt to fill generated block templates up with transactions until it is at
# least the specified number of bytes.
# blockminsize=0

# Specify the maximum block size in bytes to create.  This value will be limited
# to the consensus limit if it is larger than that value.
# blockmaxsize=750000

# Specify the size in bytes of the high-priority/low-fee area when creating a
# block.  Transactions which consist of large amounts, old inputs, and small
# sizes have the highest priority.  One consequence of this is that as low-fee
# or free transactions age, they raise in priority thereby making them more
# likely to be included in this section of a new block.  This value is limited
# by the blockmaxsize option and will be limited as needed.
# blockprioritysize=50000


# ------------------------------------------------------------------------------
# Debug
# ------------------------------------------------------------------------------

# Debug logging level.
# Valid levels are {trace, debug, info, warn, error, critical}
# You may also specify <subsystem>=<level>,<subsystem2>=<level>,... to set
# log level for individual subsystems.  Use btcd --debuglevel=show to list
# available subsystems.
# debuglevel=info

# The port used to listen for HTTP profile requests.  The profile server will
# be disabled if this option is not specified.  The profile information can be
# accessed at http://localhost:<profileport>/debug/pprof once running.
# profile=6061