MHI2_JP_VW48x_P0829 Region Conversion to EU

[veter4n]

Hello everyone,

I succesfully installed m.i.b on my radio. Currently radio's region is Japan. I want to convert the train to EU. I tried to enable EU nav, but I got several errors like cannot open file /blah/blah/log. I guess this is because the script runs on none root privileges? I found the root password corresponding on my FW but I don't know where to insert it. If I select EU train conversion what should I know? What firmware should I prepare on a new SD card? Can someone assist my step by step this process please?

Thanks in advance.

[harman-f]

Please Share your log file from sd /backup/logs/

[harman-f]

/backup/ folder on SD

conversion target FW will be shown by M.I.B

[veter4n]

Backup has finished. So, on this screen I will select 1. EU conversion, the unit will reboot and the firmware that I will have to prepare will shown here next to Your current train? Then I will download thw firmware and insert the SD card on slot 2. The I will run 3. Fix/screen bug and right after this I will install EU firmware. Am I correct?

[harman-f]

correct

[veter4n]

I successfully update the firmware. When I tried to update nav database, start update button is not clickable. What else do I have to know? Do I have to enable fec coding for eu nav? If yes how can I do this with m.i.b?
Also why is supported list on fec empty on my unit?

[harman-f]

Yes, you need to patch and EU FEC.
share your log file.

[rsbob]

Patched also?

[Kraft89]

Hi Everyone,
Apologies if this post is in the wrong location but my issue is very similar to the above so I decided to add it here rather than create a new issue.

I have an MHI2 unit from Japan and I wanted to convert it to EU region. I successfully installed M.I.B. and did a backup. I then carried out the EU conversion and all was going well until I got the black screen with no response after a reboot. As per the troubleshooting section, I got the unit back to life by removing the battery.

When it came back on, the software train had changed from MHI2_JP_VW48x_P1001 to MHI2_ER_VWG13_P4521.

Does this mean that the conversion was successful or only partly completed? Would it be safe to proceed with the 'Fix Skin/Screen Bug'' step and then install the appropriate EU firmware (MHI2_ER_VWG13_K4525 according to mibhelper.com).

I have attached the backup log.

Thanks.

MU1001-AW7-MON07.03.1900061614.log