VIM activated but not working

[Bu1aKa]

Hello together,

i installed the MIB successfull
1st. Step; Backup
2st. AIO Patch
3rd. VIM set to 199 -> but its not working. If I start driving the secure information of the MMI appears on the Screen.

to be honest:
ist tryd it already with VCDS online and with odbeleven to unlock VIM without success

i can send the logs, if needed

kind regards
Bu1

[Bu1aKa]

MU1177-YJL-26010.02.186969018A.log

RCC File is to big for upload

[harman-f]

MMX-vim---->
VIM on Unit: C7010F0AFF00000000000301FF00000003010F050F05FF0000053135AF40
Position->0 - HEX-Value->06

Generate crc16/CCITT-False checksum............................... and the Winner is: 478E

VIM is now patched on Byte 0 with 6 km/h (0x06)
Reboot Unit...

Looking at your 1st LOG entry, your unit already came "patched"
hex C7 is already 199km/h

Well, anyway M.I.B will do it right, change the 1st two bytes and calculate new CRC.
It can not check if the dataset is somehow broken...

There are also 1-2 FW, which have broken VIM from factory.
Not 100% sure, but I think MU1177-MHI2Q_ER_AUG22_P4212 could be one of them.