From be82ee68bc652f26747a60318373cf5944ba6e2e Mon Sep 17 00:00:00 2001 From: ShirleyZ <37082669+shirleyzhang867@users.noreply.github.com> Date: Tue, 18 Jun 2024 18:25:29 -0400 Subject: [PATCH] fix broken links --- .../docs/GettingStarted/Biosensing-Setups/03-ECG-Setup.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/website/docs/GettingStarted/Biosensing-Setups/03-ECG-Setup.md b/website/docs/GettingStarted/Biosensing-Setups/03-ECG-Setup.md index 1b6cd9729..e8b466ebf 100644 --- a/website/docs/GettingStarted/Biosensing-Setups/03-ECG-Setup.md +++ b/website/docs/GettingStarted/Biosensing-Setups/03-ECG-Setup.md @@ -30,7 +30,7 @@ B) One snap electrode cable should be connected to the bottom D_G pin (Driven Gr C) To get one channel of data, connect one electrode cable to the top pin 1 of the Ganglion, and one electrode cable to the bottom pin 1 of the Ganglion. FYI, for future reference, you can use pins 1-4 for up to four channels of data. Nine cables, including the ground electrode in step B, are needed if you want to use all four channels of the Ganglion board. -After making these connections, snap the Skintact sticky electrodes into the snap electrode cable. Then, remove the backing tape and apply the electrode to the skin. **For safety reasons, make sure to snap the sticky electrode onto its cable before applying the sticky electrode to your skin.** +After making these connections, snap the sticky electrodes into the snap electrode cable. Then, remove the backing tape and apply the electrode to the skin. **For safety reasons, make sure to snap the sticky electrode onto its cable before applying the sticky electrode to your skin.** ### Connect the electrodes to your body @@ -57,7 +57,7 @@ It builds on the above guide to 3-Lead ECG and adds only a few additional steps, ## Materials Needed 1. OpenBCI [Cyton Board](https://shop.openbci.com/collections/frontpage/products/cyton-biosensing-board-8-channel?variant=38958638542) -2. [Skintact sticky electrodes](https://shop.openbci.com/collections/frontpage/products/skintact-f301-pediatric-foam-solid-gel-electrodes-30-pack?variant=29467659395) +2. [Gel snap electrodes](https://shop.openbci.com/products/kendall-emg-ecg-foam-solid-gel-electrodes-30-pack) 3. [EMG/ECG Snap Electrode Cables](https://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables?variant=32372786958) — 4 individual cables 4. [OpenBCI GUI](../../Software/OpenBCISoftware/01-OpenBCI_GUI.md) @@ -103,7 +103,7 @@ Once your settings have been adjusted, press 'Start Data Stream'. You should see ## Improving Signal Quality -For help minimizing noise and improving ECG signal quality, check out [this document](Troubleshooting/01-MinimizingNoise.md) and head to the OpenBCI Technical [Forum](https://openbci.com/forum) if you have questions. +For help minimizing noise and improving ECG signal quality, check out [this document](../../Troubleshooting/01-MinimizingNoise.md) and head to the OpenBCI Technical [Forum](https://openbci.com/forum) if you have questions. Concerned about the signal quality? Read [this paper](https://www.sciencedirect.com/science/article/pii/S2405844021012512) to learn more about the reliability of OpenBCI ECG quality.