Inverter Status & Other Questions

[cdensel]

Hi,

Thanks for this project, I'm delighted to be able to "cut the cord" to SolisCloud and run everything locally.
My inverter is Solis S5-EH1P5K-L. My datalogger is S2-WL-ST connected via LAN (Device serial number 7A* , Firmware: 10010171).

I have been running this integration for a week and I have some questions

Status - The "Solis Status" sensor value is "3" with a status string of "Initialization". When I disable the integration and allow the connection to SolisCloud, and then reenable the integration, I see "Normal Operation" for a quick second, then goes to "Initialization" again where it stays. Is this anything to be worried about?

Clock Synch - After a week, I noted that the inverter time was out about by about 40mins. I read that this integration should synch the time. Is there anywhere I can manually test this? I can write to other values no problem (e.g. "Time-Charging Charge End (Slot 1)" )

Daily Values - First thing this morning, the "today" values were way off. For example, "solis_s6_solis_pv_today_energy_generation" said I'd generated 9kWh but the sun was only up. I checked on the inverter screen itself, and the values there matched the value of the integration, so it was something funny going on with the inverter. I reset the datalogger and the "today" values all dropped back to 0. Has anyone experienced this?

Utility Meters - In the project description, there is the suggestion to create our own utility meters to track usage. Could someone please point me to the entity I should be tracking for "Daily Imported from Grid"? I tried creating it on the "Solis S6 Solis Total Energy Imported From Grid" sensor but that is only in whole KWH values and doesn't provide decimals. I'd like to have decimal places to show the hourly values correctly on the Energy dashboad.

Thanks for reading!
Conor