b_u585i_iot02a.c

/**
  ******************************************************************************
  * @file    b_u585i_iot02a.c
  * @author  MCD Application Team
  * @brief   This file provides a set of firmware functions to manage
  *          LEDs
  *          USER push-button
  *          COM port
  *          available on B_U585I_IOT02A board(MB1551) from STMicroelectronics.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2021 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "b_u585i_iot02a.h"
#if defined(__ICCARM__)
#include <LowLevelIOInterface.h>
#endif /* __ICCARM__ */

/** @addtogroup BSP
  * @{
  */

/** @addtogroup B_U585I_IOT02A
  * @{
  */

/** @defgroup B_U585I_IOT02A_LOW_LEVEL LOW LEVEL
  * @{
  */

/** @defgroup B_U585I_IOT02A_COMMON_Private_Defines B_U585I_IOT02A COMMON Private Defines
  * @{
  */

/**
  * @}
  */

/** @defgroup B_U585I_IOT02A_COMMON_Private_Macros B_U585I_IOT02A COMMON Private Macros
  * @{
  */

/**
  * @}
  */

/** @defgroup B_U585I_IOT02A_LOW_LEVEL_Private_TypesDefinitions LOW LEVEL Private Types Definitions
  * @{
  */
typedef void (* BSP_EXTI_LineCallback)(void);
/**
  * @}
  */

/** @defgroup B_U585I_IOT02A_LOW_LEVEL_Private_FunctionPrototypes  LOW LEVEL Private Function Prototypes
  * @{
  */
static void BUTTON_USER_EXTI_Callback(void);
#if (USE_BSP_COM_FEATURE > 0)
static void COM_MspInit(UART_HandleTypeDef *huart);
static void COM_MspDeInit(UART_HandleTypeDef *huart);
#endif /*USE_BSP_COM_FEATURE */

#if defined(__ICCARM__)
/* New definition from EWARM V9, compatible with EWARM8 */
int iar_fputc(int ch);
#define PUTCHAR_PROTOTYPE int iar_fputc(int ch)
#elif defined ( __CC_ARM ) || defined(__ARMCC_VERSION)
/* ARM Compiler 5/6*/
#define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
#elif defined(__GNUC__)
#define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
#endif /* __ICCARM__ */

/**
  * @}
  */
/** @defgroup B_U585I_IOT02A_LOW_LEVEL_Exported_Variables LOW LEVEL Exported Variables
  * @{
  */
EXTI_HandleTypeDef hpb_exti[BUTTON_NBR];
#if (USE_BSP_COM_FEATURE > 0)
UART_HandleTypeDef hcom_uart[COM_NBR];
USART_TypeDef *COM_UART[COM_NBR]   = {COM1_UART};
#endif /* USE_BSP_COM_FEATURE */

/**
  * @}
  */

/** @defgroup B_U585I_IOT02A_LOW_LEVEL_Private_Variables LOW LEVEL Private Variables
  * @{
  */
static GPIO_TypeDef *LED_PORT[LED_NBR] = {LED6_GPIO_PORT,
                                          LED7_GPIO_PORT,
                                         };

static const uint32_t LED_PIN[LED_NBR] = {LED6_PIN,
                                          LED7_PIN,
                                         };

static GPIO_TypeDef *BUTTON_PORT[BUTTON_NBR] = {BUTTON_USER_GPIO_PORT
                                               };
static const uint16_t BUTTON_PIN[BUTTON_NBR] = {BUTTON_USER_PIN
                                               };
static const IRQn_Type BUTTON_IRQn[BUTTON_NBR] = {BUTTON_USER_EXTI_IRQn
                                                 };

#if (USE_COM_LOG > 0)
static COM_TypeDef COM_ActiveLogPort = COM1;
#endif /* USE_COM_LOG */

#if (USE_BSP_COM_FEATURE > 0)
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
static uint32_t IsComMspCbValid[COM_NBR] = {0};
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
#endif /* USE_BSP_COM_FEATURE */

/**
  * @}
  */

/** @defgroup B_U585I_IOT02A_LOW_LEVEL_Exported_Functions LOW LEVEL Exported Functions
  * @{
  */

/**
  * @brief  This method returns the B_U585I_IOT02A BSP Driver revision
  * @retval version: 0xXYZR (8bits for each decimal, R for RC)
  */
int32_t BSP_GetVersion(void)
{
  return (int32_t)B_U585I_IOT02A_BSP_VERSION;
}

/**
  * @brief  This method returns the board name
  * @retval pointer to the board name string
  */
const uint8_t *BSP_GetBoardName(void)
{
  return (uint8_t *)B_U585I_IOT02A_BSP_BOARD_NAME;
}

/**
  * @brief  This method returns the board ID
  * @retval pointer to the board name string
  */
const uint8_t *BSP_GetBoardID(void)
{
  return (uint8_t *)B_U585I_IOT02A_BSP_BOARD_ID;
}

/**
  * @brief  Configures LED on GPIO.
  * @param  Led LED to be configured.
  *          This parameter can be one of the following values:
  *            @arg  LED6
  *            @arg  LED7
  * @retval BSP status
  */
int32_t BSP_LED_Init(Led_TypeDef Led)
{
  int32_t ret = BSP_ERROR_NONE;
  GPIO_InitTypeDef  gpio_init_structure;

  /* Enable the GPIO_LED clock */
  LED6_GPIO_CLK_ENABLE();
  LED7_GPIO_CLK_ENABLE();

  /* Configure the GPIO_LED pin */
  gpio_init_structure.Mode = GPIO_MODE_OUTPUT_PP;
  gpio_init_structure.Pull = GPIO_NOPULL;
  gpio_init_structure.Speed = GPIO_SPEED_FREQ_HIGH;
  gpio_init_structure.Pin = LED_PIN [Led];
  HAL_GPIO_Init(LED_PORT[Led], &gpio_init_structure);
  HAL_GPIO_WritePin(LED_PORT [Led], (uint16_t)LED_PIN[Led], GPIO_PIN_SET);

  return ret;
}

/**
  * @brief  DeInit LEDs.
  * @param  Led LED to be configured.
  *          This parameter can be one of the following values:
  *            @arg  LED6
  *            @arg  LED7
  * @retval BSP status
  */
int32_t BSP_LED_DeInit(Led_TypeDef Led)
{
  int32_t ret = BSP_ERROR_NONE;
  GPIO_InitTypeDef  gpio_init_structure;

  /* Configure the GPIO_LED pin */
  gpio_init_structure.Pin = LED_PIN [Led];
  HAL_GPIO_WritePin(LED_PORT[Led], (uint16_t)LED_PIN[Led], GPIO_PIN_RESET);
  HAL_GPIO_DeInit(LED_PORT[Led], gpio_init_structure.Pin);

  return ret;
}

/**
  * @brief  Turns selected LED On.
  * @param  Led LED to be set on
  *          This parameter can be one of the following values:
  *            @arg  LED6
  *            @arg  LED7
  * @retval BSP status
  */
int32_t BSP_LED_On(Led_TypeDef Led)
{
  int32_t ret;

  HAL_GPIO_WritePin(LED_PORT [Led], (uint16_t)LED_PIN [Led], GPIO_PIN_RESET);
  ret = BSP_ERROR_NONE;

  return ret;
}

/**
  * @brief  Turns selected LED Off.
  * @param  Led LED to be set off
  *          This parameter can be one of the following values:
  *            @arg  LED6
  *            @arg  LED7
  * @retval BSP status
  */
int32_t BSP_LED_Off(Led_TypeDef Led)
{
  int32_t ret;

  HAL_GPIO_WritePin(LED_PORT [Led], (uint16_t)LED_PIN [Led], GPIO_PIN_SET);
  ret = BSP_ERROR_NONE;

  return ret;
}

/**
  * @brief  Toggles the selected LED.
  * @param  Led LED to be toggled
  *          This parameter can be one of the following values:
  *            @arg  LED5
  *            @arg  LED7
  * @retval BSP status
  */
int32_t BSP_LED_Toggle(Led_TypeDef Led)
{
  int32_t ret;

  HAL_GPIO_TogglePin(LED_PORT[Led], (uint16_t)LED_PIN[Led]);
  ret = BSP_ERROR_NONE;

  return ret;
}

/**
  * @brief  Get the selected LED state.
  * @param  Led LED to be get its state
  *          This parameter can be one of the following values:
  *            @arg  LED5
  *            @arg  LED7
  * @retval LED status
  */
int32_t BSP_LED_GetState(Led_TypeDef Led)
{
  if ((Led != LED6) && (Led != LED7))
  {
    return BSP_ERROR_WRONG_PARAM;
  }
  else if (HAL_GPIO_ReadPin(LED_PORT[Led], (uint16_t)LED_PIN[Led]) == GPIO_PIN_RESET)
  {
    /* Led is On */
    return 1;
  }
  else
  {
    /* Led is Off */
    return 0;
  }
}

/**
  * @brief  Configures button GPIO and EXTI Line.
  * @param  Button: Button to be configured
  *          This parameter can be one of the following values:
  *            @arg  BUTTON_USER: User Push Button
  * @param  ButtonMode Button mode
  *          This parameter can be one of the following values:
  *            @arg  BUTTON_MODE_GPIO: Button will be used as simple IO
  *            @arg  BUTTON_MODE_EXTI: Button will be connected to EXTI line
  *                                    with interrupt generation capability
  * @retval BSP status
  */
int32_t BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode)
{
  int32_t ret = BSP_ERROR_NONE;
  GPIO_InitTypeDef gpio_init_structure;
  static BSP_EXTI_LineCallback ButtonCallback[BUTTON_NBR] = {BUTTON_USER_EXTI_Callback,};
  static uint32_t  BSP_BUTTON_PRIO [BUTTON_NBR] = {BSP_BUTTON_USER_IT_PRIORITY,};
  static const uint32_t BUTTON_EXTI_LINE[BUTTON_NBR] = {BUTTON_USER_EXTI_LINE,};

  if (Button != BUTTON_USER)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    /* Enable the BUTTON clock*/
    BUTTON_USER_GPIO_CLK_ENABLE();

    gpio_init_structure.Pin = BUTTON_PIN [Button];
    gpio_init_structure.Pull = GPIO_PULLDOWN;
    gpio_init_structure.Speed = GPIO_SPEED_FREQ_HIGH;

    if (ButtonMode == BUTTON_MODE_GPIO)
    {
      /* Configure Button pin as input */
      gpio_init_structure.Mode = GPIO_MODE_INPUT;
      HAL_GPIO_Init(BUTTON_PORT [Button], &gpio_init_structure);
    }
    else /* (ButtonMode == BUTTON_MODE_EXTI) */
    {
      /* Configure Button pin as input with External interrupt */
      gpio_init_structure.Mode = GPIO_MODE_IT_RISING;

      HAL_GPIO_Init(BUTTON_PORT[Button], &gpio_init_structure);

      (void)HAL_EXTI_GetHandle(&hpb_exti[Button], BUTTON_EXTI_LINE[Button]);
      (void)HAL_EXTI_RegisterCallback(&hpb_exti[Button],  HAL_EXTI_COMMON_CB_ID, ButtonCallback[Button]);

      /* Enable and set Button EXTI Interrupt to the lowest priority */
      HAL_NVIC_SetPriority((BUTTON_IRQn[Button]), BSP_BUTTON_PRIO[Button], 0x00);
      HAL_NVIC_EnableIRQ((BUTTON_IRQn[Button]));
    }
  }

  return ret;
}

/**
  * @brief  Push Button DeInit.
  * @param  Button Button to be configured
  *          This parameter can be one of the following values:
  *            @arg  BUTTON_USER: User Push Button
  * @note PB DeInit does not disable the GPIO clock
  * @retval BSP status
  */
int32_t BSP_PB_DeInit(Button_TypeDef Button)
{
  int32_t ret = BSP_ERROR_NONE;
  GPIO_InitTypeDef gpio_init_structure;

  if (Button != BUTTON_USER)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    gpio_init_structure.Pin = BUTTON_PIN[Button];
    HAL_NVIC_DisableIRQ((IRQn_Type)(BUTTON_IRQn[Button]));
    HAL_GPIO_DeInit(BUTTON_PORT[Button], gpio_init_structure.Pin);
  }

  return ret;
}

/**
  * @brief  Returns the selected button state.
  * @param  Button Button to be checked
  *          This parameter can be one of the following values:
  *            @arg  BUTTON_USER: User Push Button
  * @retval The Button GPIO pin value
  */
int32_t BSP_PB_GetState(Button_TypeDef Button)
{
  return (int32_t)HAL_GPIO_ReadPin(BUTTON_PORT[Button], BUTTON_PIN[Button]);
}

/**
  * @brief  This function handles Push-Button interrupt requests.
  * @param  Button Specifies the pin connected EXTI line
  * @retval None
  */
void BSP_PB_IRQHandler(Button_TypeDef Button)
{
  HAL_EXTI_IRQHandler(&hpb_exti[Button]);
}

/**
  * @brief  BSP Push Button callback
  * @param  Button Specifies the pin connected EXTI line
  * @retval None.
  */
__weak void BSP_PB_Callback(Button_TypeDef Button)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(Button);
  /* This function should be implemented by the user application.
     It is called into this driver when an event on Button is triggered. */
}

#if (USE_BSP_COM_FEATURE > 0)
/**
  * @brief  Configures COM port.
  * @param  COM port to be configured.
  *          This parameter should be COM1
  * @param  COM_Init Pointer to a UART_HandleTypeDef structure that contains the
  *                configuration information for the specified LPUART peripheral.
  * @retval BSP status
  */
int32_t BSP_COM_Init(COM_TypeDef COM, COM_InitTypeDef *COM_Init)
{
  int32_t ret = BSP_ERROR_NONE;

  if (COM >= COM_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    /* Set the COM Instance */
    hcom_uart[COM].Instance = COM_UART[COM];

    /* Init the UART Msp */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 0)
    COM_MspInit(&hcom_uart[COM]);
#else
    if (IsComMspCbValid[COM] == 0U)
    {
      if (BSP_COM_RegisterDefaultMspCallbacks(COM) != BSP_ERROR_NONE)
      {
        return BSP_ERROR_MSP_FAILURE;
      }
    }
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */

    if (MX_USART1_Init(&hcom_uart[COM], COM_Init) != HAL_OK)
    {
      ret = BSP_ERROR_PERIPH_FAILURE;
    }
  }

  return ret;
}

/**
  * @brief  DeInit COM port.
  * @param  COM COM port to be configured.
  *          This parameter can be (COM1)
  * @retval BSP status
  */
int32_t BSP_COM_DeInit(COM_TypeDef COM)
{
  int32_t ret = BSP_ERROR_NONE;

  if (COM >= COM_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    /* UART configuration */
    hcom_uart[COM].Instance = COM_UART[COM];

#if (USE_HAL_UART_REGISTER_CALLBACKS == 0)
    COM_MspDeInit(&hcom_uart[COM]);
#endif /* (USE_HAL_UART_REGISTER_CALLBACKS == 0) */

    if (HAL_UART_DeInit(&hcom_uart[COM]) != HAL_OK)
    {
      ret = BSP_ERROR_PERIPH_FAILURE;
    }
  }

  return ret;
}

/**
  * @brief  Configures COM port.
  * @param  huart UART handle
  * @param  COM_Init Pointer to a UART_HandleTypeDef structure that contains the
  *                  configuration information for the specified LPUART peripheral.
  * @retval HAL error code
  */
__weak HAL_StatusTypeDef MX_USART1_Init(UART_HandleTypeDef *huart, MX_UART_InitTypeDef *COM_Init)
{
  /* UART configuration */
  huart->Init.BaudRate     = COM_Init->BaudRate;
  huart->Init.Mode         = UART_MODE_TX_RX;
  huart->Init.Parity       = (uint32_t)COM_Init->Parity;
  huart->Init.WordLength   = (uint32_t)COM_Init->WordLength;
  huart->Init.StopBits     = (uint32_t)COM_Init->StopBits;
  huart->Init.HwFlowCtl    = (uint32_t)COM_Init->HwFlowCtl;
  huart->Init.OverSampling = UART_OVERSAMPLING_8;

  return HAL_UART_Init(huart);
}

#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
/**
  * @brief Register Default COM Msp Callbacks
  * @param  COM COM port to be configured.
  * @retval BSP status
  */
int32_t BSP_COM_RegisterDefaultMspCallbacks(COM_TypeDef COM)
{
  int32_t ret = BSP_ERROR_NONE;

  if (COM >= COM_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    __HAL_UART_RESET_HANDLE_STATE(&hcom_uart[COM]);

    /* Register default MspInit/MspDeInit Callback */
    if (HAL_UART_RegisterCallback(&hcom_uart[COM], HAL_UART_MSPINIT_CB_ID,) != HAL_OK)
    {
      ret = BSP_ERROR_PERIPH_FAILURE;
    }
    else if (HAL_UART_RegisterCallback(&hcom_uart[COM], HAL_UART_MSPDEINIT_CB_ID, UART1_MspDeInit) != HAL_OK)
    {
      ret = BSP_ERROR_PERIPH_FAILURE;
    }
    else
    {
      IsComMspCbValid[COM] = 1U;
    }
  }

  /* BSP status */
  return ret;
}

/**
  * @brief  Register COM Msp Callback registering
  * @param  COM port to be configured.
  * @param  Callbacks pointer to COM MspInit/MspDeInit callback functions
  * @retval BSP status
  */
int32_t BSP_COM_RegisterMspCallbacks(COM_TypeDef COM, BSP_COM_Cb_t *Callback)
{
  int32_t ret = BSP_ERROR_NONE;

  if (COM >= COM_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    __HAL_UART_RESET_HANDLE_STATE(&hcom_uart[COM]);

    /* Register MspInit/MspDeInit Callbacks */
    if (HAL_UART_RegisterCallback(&hcom_uart[COM], HAL_UART_MSPINIT_CB_ID, Callback->pMspInitCb) != HAL_OK)
    {
      ret = BSP_ERROR_PERIPH_FAILURE;
    }
    else if (HAL_UART_RegisterCallback(&hcom_uart[COM], HAL_UART_MSPDEINIT_CB_ID, Callback->pMspDeInitCb) != HAL_OK)
    {
      ret = BSP_ERROR_PERIPH_FAILURE;
    }
    else
    {
      IsComMspCbValid[COM] = 1U;
    }
  }

  /* BSP status */
  return ret;
}
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */

#if (USE_COM_LOG > 0)
/**
  * @brief  Select the active COM port.
  * @param  COM port to be activated.
  * @retval BSP status
  */
int32_t BSP_COM_SelectLogPort(COM_TypeDef COM)
{
  if (COM_ActiveLogPort != COM)
  {
    COM_ActiveLogPort = COM;
  }
  return BSP_ERROR_NONE;
}

/**
  * @brief  Retargets the C library __write function to the IAR function iar_fputc.
  * @param  file: file descriptor.
  * @param  ptr: pointer to the buffer where the data is stored.
  * @param  len: length of the data to write in bytes.
  * @retval length of the written data in bytes.
  */
#if defined(__ICCARM__)
size_t __write(int file, unsigned char const *ptr, size_t len)
{
  size_t idx;
  unsigned char const *pdata = ptr;

  for (idx = 0; idx < len; idx++)
  {
    iar_fputc((int)*pdata);
    pdata++;
  }
  return len;
}
#endif /* __ICCARM__ */

PUTCHAR_PROTOTYPE
{
  (void)HAL_UART_Transmit(&hcom_uart [COM_ActiveLogPort], (uint8_t *) &ch, 1, COM_POLL_TIMEOUT);
  return ch;
}
#endif /* USE_COM_LOG */
#endif /* USE_BSP_COM_FEATURE */

/**
  * @brief  KEY EXTI line detection callbacks.
  * @retval None
  */
static void BUTTON_USER_EXTI_Callback(void)
{
  BSP_PB_Callback(BUTTON_USER);
}

#if (USE_BSP_COM_FEATURE > 0)
/**
  * @brief  Initializes UART MSP.
  * @param  huart UART handle
  * @retval None
  */
static void COM_MspInit(UART_HandleTypeDef *huart)
{
  GPIO_InitTypeDef gpio_init_structure;

  UNUSED(huart);

  /* Enable GPIO clock */
  COM1_TX_GPIO_CLK_ENABLE();
  COM1_RX_GPIO_CLK_ENABLE();

  /* Enable UART clock */
  COM1_CLK_ENABLE();

  /* Configure UART Tx as alternate function */
  gpio_init_structure.Pin       = COM1_TX_PIN;
  gpio_init_structure.Mode      = GPIO_MODE_AF_PP;
  gpio_init_structure.Speed     = GPIO_SPEED_FREQ_HIGH;
  gpio_init_structure.Pull      = GPIO_PULLUP;
  gpio_init_structure.Alternate = COM1_TX_AF;
  HAL_GPIO_Init(COM1_TX_GPIO_PORT, &gpio_init_structure);

  /* Configure UART Rx as alternate function */
  gpio_init_structure.Pin       = COM1_RX_PIN;
  gpio_init_structure.Mode      = GPIO_MODE_AF_PP;
  gpio_init_structure.Alternate = COM1_RX_AF;
  HAL_GPIO_Init(COM1_RX_GPIO_PORT, &gpio_init_structure);
}

/**
  * @brief  Initialize UART Msp part
  * @param  huart UART handle
  * @retval None
  */
static void COM_MspDeInit(UART_HandleTypeDef *huart)
{
  GPIO_InitTypeDef          gpio_init_structure;

  UNUSED(huart);

  /* COM GPIO pin configuration */
  gpio_init_structure.Pin  = COM1_TX_PIN;
  HAL_GPIO_DeInit(COM1_TX_GPIO_PORT, gpio_init_structure.Pin);

  gpio_init_structure.Pin  = COM1_RX_PIN;
  HAL_GPIO_DeInit(COM1_RX_GPIO_PORT, gpio_init_structure.Pin);

  /* Disable UART clock */
  COM1_CLK_DISABLE();
}
#endif /* USE_BSP_COM_FEATURE */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */