minor

Author: raacampbell

ExampleCodeSnippets/Zaber_Build_Example.m

@@ -23,15 +23,15 @@
 	%
 	%
 	% Using a rotary controller
-	% The encoder wheel has a button that, when long-pressed, will switch between 
+	% The encoder wheel has a button that, when long-pressed, will switch between
 	% position and speed modes. This can be avoided (keeping it position mode)
 	% by running the following commands in Zaber Launcher:
-	%  
+	%
 	% /1 trigger 1 when 1 knob.mode == 0
 	% /1 trigger 1 action a 1 knob.mode = 1
 	% /1 trigger 1 enable
-	% 
-	% This assumes your controller is set to device 1, so if not, just replace the first 
+	%
+	% This assumes your controller is set to device 1, so if not, just replace the first
 	% 1 in each command with the actual device number.
 	%
 	%