Skip to content

Commit e201d02

Browse files
SinbiosisSinbiosis
committed
ramips: Add support for D-Link DIR-3040 A1
This adds support for the A1 hardware revision of the DIR-3040. It is an exact copy of the DIR-3060 save for some cosmetic changes to the housing. Even going so far as having the same FCC ID. Hardware specification: SoC: MediaTek MT7621AT Flash: Winbond W29N01HVSINA 128MB RAM: Micron MT41K128M16JT-125 256MB Ethernet: 5x 10/100/1000 Mbps WiFi1: MT7615DN 2.4GHz N 2x2:2 WiFi2: MT7615DN 5GHz AC 2x2:2 WiFi3: MT7615N 5GHz AC 4x4:4 Button: WPS, Reset Flash instructions: OpenWrt can be installed via D-Link Recovery GUI: NOTE: Seems to only work in Firefox on Windows. Tried with Chrome on Windows, Firefox in Linux, and Chromium in Linux. None of these other browsers worked. 1. Push and hold reset button (on the bottom of the device) until power led starts flashing (about 10 secs or so) while plugging in the power cable. 2. Give it ~30 seconds, to boot the recovery mode GUI 3. Connect your client computer to LAN1 of the device 4. Set your client IP address manually to 192.168.0.2 / 255.255.255.0. 5. Call the recovery page for the device at http://192.168.0.1/ 6. Use the provided emergency web GUI to upload and flash a new firmware to the device Thanks to @Lucky1openwrt and @iivailo for creating the DIR-3060 DTS file and related changes, so it was possible for me to adapt them to the DIR-3040, build images, test and fix minor issues. MAC Addresses: | use | address | example | | --- | --- | --- | | LAN | label | f4:*:61 | | WAN | label + 4 | f4:*:65 | | WI1/2g | label + 2 | f4:*:63 | | WI1/5g | label + 1 | f4:*:62 | | WI2/5g | label + 3 | f4:*:64 | The label MAC address was found in Factory, 0xe000 Checklist: ✓ nand ✓ ethernet ✓ button ✓ wifi2g ✓ wifi5g ✓ wifi5g ✓ mac ✓ led Signed-off-by: Sinbiosis <vincemckinsey@gmail.com>
1 parent 7939df9 commit e201d02

File tree

6 files changed

+76
-2
lines changed

6 files changed

+76
-2
lines changed

‎target/linux/ramips/dts/mt7621_dlink_dir-3040-a1.dts

Lines changed: 60 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,60 @@
1+
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2+
3+
#include "mt7621_dlink_dir-xx60-a1.dtsi"
4+
5+
/ {
6+
compatible = "dlink,dir-3040-a1", "mediatek,mt7621-soc";
7+
model = "D-Link DIR-3040 A1";
8+
};
9+
10+
&wps {
11+
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
12+
};
13+
14+
&leds {
15+
usb2_white {
16+
label = "white:usb2";
17+
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
18+
trigger-sources = <&ehci_port2>;
19+
linux,default-trigger = "usbport";
20+
};
21+
22+
usb3_white {
23+
label = "white:usb3";
24+
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
25+
trigger-sources = <&xhci_ehci_port1>;
26+
linux,default-trigger = "usbport";
27+
};
28+
29+
wlan2g {
30+
label = "white:wlan2g";
31+
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
32+
linux,default-trigger = "phy0radio";
33+
};
34+
35+
wlan5glb {
36+
label = "white:wlan5glb";
37+
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
38+
linux,default-trigger = "phy1radio";
39+
};
40+
41+
wlan5ghb {
42+
label = "white:wlan5ghb";
43+
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
44+
linux,default-trigger = "phy2radio";
45+
};
46+
};
47+
48+
49+
&wifi0 {
50+
mediatek,mtd-eeprom = <&factory 0x0>;
51+
nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_e000 1>;
52+
nvmem-cell-names = "eeprom", "mac-address";
53+
ieee80211-freq-limit = <2400000 6000000>;
54+
};
55+
56+
&wifi1 {
57+
mediatek,mtd-eeprom = <&factory 0x8000>;
58+
nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_e000 3>;
59+
nvmem-cell-names = "eeprom", "mac-address";
60+
};

‎target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi

Lines changed: 2 additions & 2 deletions
Original file line numberDiff line numberDiff line change
@@ -14,7 +14,7 @@
1414
led-upgrade = &led_net_orange;
1515
};
1616

17-
keys {
17+
keys: keys {
1818
compatible = "gpio-keys";
1919

2020
reset {
@@ -23,7 +23,7 @@
2323
linux,code = <KEY_RESTART>;
2424
};
2525

26-
wps {
26+
wps: wps {
2727
label = "wps";
2828
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
2929
linux,code = <KEY_WPS_BUTTON>;

‎target/linux/ramips/image/mt7621.mk

Lines changed: 7 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -783,6 +783,13 @@ define Device/dlink_dir-2660-a1
783783
endef
784784
TARGET_DEVICES += dlink_dir-2660-a1
785785

786+
define Device/dlink_dir-3040-a1
787+
$(Device/dlink_dir-xx60-a1)
788+
DEVICE_MODEL := DIR-3040
789+
DEVICE_VARIANT := A1
790+
endef
791+
TARGET_DEVICES += dlink_dir-3040-a1
792+
786793
define Device/dlink_dir-3060-a1
787794
$(Device/dlink_dir-xx60-a1)
788795
DEVICE_MODEL := DIR-3060

‎target/linux/ramips/mt7621/base-files/etc/board.d/01_leds

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -95,6 +95,7 @@ dlink,dir-2640-a1|\
9595
dlink,dir-2660-a1)
9696
ucidef_set_led_netdev "wan" "wan" "white:net" "wan"
9797
;;
98+
dlink,dir-3040-a1|\
9899
dlink,dir-3060-a1)
99100
ucidef_set_led_netdev "net_white" "WAN Link" "white:net" "wan" "link"
100101
ucidef_set_led_netdev "net_orange" "WAN Activity" "orange:net" "wan" "tx rx"

‎target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac

Lines changed: 5 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -37,6 +37,11 @@ case "$board" in
3737
[ "$PHYNBR" = "1" ] && \
3838
macaddr_setbit_la "$(macaddr_add $hw_mac_addr 0x100000)" > /sys${DEVPATH}/macaddress
3939
;;
40+
dlink,dir-3040-a1)
41+
lan_mac_addr="$(mtd_get_mac_binary factory 0xe000)"
42+
[ "$PHYNBR" = "0" ] && \
43+
macaddr_add $lan_mac_addr 2 > /sys${DEVPATH}/macaddress
44+
;;
4045
dlink,dap-1620-b1|\
4146
dlink,dir-853-a1|\
4247
dlink,dra-1360-a1)

‎target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -68,6 +68,7 @@ platform_do_upgrade() {
6868
dlink,dir-1960-a1|\
6969
dlink,dir-2640-a1|\
7070
dlink,dir-2660-a1|\
71+
dlink,dir-3040-a1|\
7172
dlink,dir-3060-a1|\
7273
dlink,dir-853-a3|\
7374
etisalat,s3|\

0 commit comments

Comments
 (0)