README.md

BETA2 Release(outdated document)

Better 2020 gantry.
New option for 1515 gantry with huge performance boost(see shaper test result below).
New option for 1515 bed frame.
New Z rail block mounting with limiter by default. This will keep the bed from tilting too much that cause the z probe cannot reach the bed.
Better sherpa mini extruder mounter with 16mm shorter filament path.
Added quick release front door and panel mounts.

Z block mount
- 1x_z-rail-block-mount-right-with-limiter.stl
- 2x_z-rail-block-mount-left-with-limiter.stl
Y carrier
- 1x_y-carrier-bottom-left.stl
- 1x_y-carrier-bottom-right.stl
- 1x_y-carrier-top-left.stl
- 1x_y-carrier-top-right.stl
Extruder carrier parts
- 1x_extruder-cable-support.stl
- 2x_extruder-belt-clamp.stl
- 2x_extruder-belt-tesioner.stl
- 1x_extruder-back-plate.stl
- 1x_extruder-front-plate.stl
- And Sherpa mini mounter parts

Parts are tested and will not change on stable release
- Motion system (XYZ) axis parts
- Toolhead parts
- Back and bottom panels/electronics mounter
Parts are not tested, might change on later release
- None
Parts will be added later
- Parts for 250mm3 machine size
- Neopixel mount
- Mounter to feed filament from outside enclosure
- AIO filament sensor(jam/runout/fil.width detect)
- Nozzle brush
Parts will be replaced
- None

Material : PETG, ABS, PC or anything you think will withstand the chamber temp you need.
Recommended slicer setting:
- Layer height : 0.2mm
- Wall lines count : 5
- Top/Bottom layers : 5
- Infill : Gyroid 30%
- Support placement : Touching d plate only

I don't have enough time to make the document atm. I will try to add document and build manual after finished design all the incomplete machine parts.
For build log, help, and bug report please using Our discord server