Requirement Analysis

SI.NO	Requirements	DEMAND/WISH	RATING
1	The board should accept all the modules connected to it	Demand	9
2	The casing should not have any sharp surfaces	Demand	10
3	The board should be able to supply the required voltages for I/O pins	Demand	10
4	The board should be easily fixed/removed from the casing	Demand	9
5	The software should be able to program all the modules/sensors connected	Demand	10
6	The casing material should be shock proof	Demand	9
7	The modules should be easily attached/detached	Demand	10
8	The UI should be able to demonstrate ongoing process	Wish	8
9	The system developed (Hardware + Software) should be affordable	Demand	9
10	Casing should be strong and efficient	Demand	10
11	Casing should be durable	Demand	10
12	The UI should work on all the browsers smoothly	Demand	9
13	The software and the UI developed should be user friendly	Demand	9
14	The board should be able to work in all environments	Demand	10
15	The material used for casing should be rigid	Demand	9
16	The material used for casing should be light weight	Wish	8
17	The material used for casing should be low cost	Wish	8
18	The material used for casing should not affect the board	Demand	9
19	The board should dissipate less heat	Wish	8
20	The board should not affect the casing material	Demand	9
21	The casing should have proper heat flow	Demand	9
22	The heat sink should be able to remove the heat from the casing	Demand	10
23	The heat sink should be light weight	Demand	9
24	The heat sink should be shock proof	Demand	10
25	The heat sink should not damage the board	Demand	10
26	The board should be able to connect all the modules	Demand	10
27	The board should be able to run the installed OS	Demand	10
28	The board should be able to execute the programs dumped	Demand	10
29	The board should be capable to execute multiple codes	Demand	9
30	The board should have good processing speed	Demand	9
31	The code written should be according to the sensors connected	Demand	10
32	The software should be able to interact with the board	Demand	10
33	The UI should display the components connected to the board	Wish	7
34	The software should run on all the operating systems	Demand	10
35	The software should communicate with the UI	Demand	9
36	The UI should display the code running on the board	Wish	7
37	The code written should consume less memory	Wish	8
38	If needed the code can be directly written on the board	Wish	7
39	The software must be able to communicate to the board and the UI at the same time	Wish	8