From bda751792a4fdc5bd67cf002d6b0ecdef7903a29 Mon Sep 17 00:00:00 2001 From: Patrick Baus Date: Fri, 14 Jun 2024 21:36:56 +0200 Subject: [PATCH] Increasing maximum compatible verison of RP OS to 1.0.3 --- manual/RedPitaya_Lockbox_manual.tex | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/manual/RedPitaya_Lockbox_manual.tex b/manual/RedPitaya_Lockbox_manual.tex index 106ae81..e4ade18 100755 --- a/manual/RedPitaya_Lockbox_manual.tex +++ b/manual/RedPitaya_Lockbox_manual.tex @@ -59,7 +59,7 @@ \section{Setting up the RedPitaya} \subsection{Mounting the RedPitaya on the lockbox PCB} -\index{RedPitaya OS}\marginlabel{Install the RedPitaya OS} Install the RedPitaya OS on a microSD card (4 GB min.) following the instructions on \href{https://redpitaya.readthedocs.io/en/latest/quickStart/SDcard/SDcard.html}{https://redpitaya.readthedocs.io/en/latest/quickStart/ SDcard/SDcard.html}. PyRPL has been tested with software release 0.94 to 0.99. Use the latest release if possible. Older releases can be found here: \href{http://downloads.redpitaya.com/downloads/}{http://downloads.redpitaya.com/ downloads/}. A local copy of the latest image can be found on $\backslash$$\backslash$brain42$\backslash$public$\backslash$Labortechnik $\backslash$Elektronik$\backslash$RedPitay$\backslash$Images. Insert the card in the SD slot of the RedPitaya after installation. +\index{RedPitaya OS}\marginlabel{Install the RedPitaya OS} Install the RedPitaya OS on a microSD card (4 GB min.) following the instructions on \href{https://redpitaya.readthedocs.io/en/latest/quickStart/SDcard/SDcard.html}{https://redpitaya.readthedocs.io/en/latest/quickStart/ SDcard/SDcard.html}. PyRPL has been tested with software release 0.94 to 1.0.3. Testing of version 2.x is pending. Older releases can be found here: \href{http://downloads.redpitaya.com/downloads/}{http://downloads.redpitaya.com/ downloads/}. A local copy of the latest image can be found on $\backslash$$\backslash$brain42$\backslash$public$\backslash$Labortechnik $\backslash$Elektronik$\backslash$RedPitay$\backslash$Images. Insert the card in the SD slot of the RedPitaya after installation. \index{Offset resistors}\marginlabel{Remove the DC-offsets} Remove the noisy DC-offset for both fast RedPitaya outputs by removing the four resistors marked in Fig.~\ref{fig:offset}. Use a standard soldering iron. This shifts the output voltage range from $\pm$\qty{1}{\volt} to \qty{0}{\volt}--\qty{2}{\volt}. Additional information can be found on \href{https://ln1985blog.wordpress.com/2016/02/07/red-pitaya-dac-performance/}{https://ln1985blog.wordpress.com/ 2016/02/07/red-pitaya-dac-performance/}. After removing the resistors, label the board accordingly (e.g. 'offset removed').