Skip to content

Latest commit

 

History

History
24 lines (15 loc) · 912 Bytes

Hardware-Itead-Motor.md

File metadata and controls

24 lines (15 loc) · 912 Bytes

Itead Motor Clockwise/Anticlockwise

ITEAD Motor Clockwise/Anticlockwise

Property Value
Manufacturer Itead Studio
Product page https://www.itead.cc/smart-home/motor-reversing-wifi-wireless-switch.html
Wiki page https://www.itead.cc/wiki/Sonoff
Build flag ITEAD_MOTOR

Introduction

TODO

Flashing

1CH - close shot

Very much like the 1CH above (actually the photo above is from the 1CH). The main button is tied to GPIO0 so you can easily enter flash mode powering the board while pressing the button (the one that’s closer to the electrolytic capacitors). Pins 7, 8 and 9 of the PSA-B module are RX, TX and GND. You can use a 3-pin header or pogo pins to connect it.

Issues

TODO