Uniswap Wallet

Uniswap Wallet is the simplest, safest, and most powerful self-custodial crypto wallet. It is developed by the Uniswap Labs team, inventors of the Uniswap Protocol.

If you have suggestions on how we can improve the app, or would like to report a bug or a problem, check out the Uniswap Help Center.

Setup

This guide assumes that:

You are using a Mac (you will need a Mac computer in order to run the Xcode iOS Simulator)
You are using an Apple Silicon Mac (if you’re not sure, go to  → About this Mac and check if the chip name starts with "Apple")

Note: If you are indeed using an Apple Silicon Mac, we recommend setting up your environment without using Rosetta. Some instructions on how to do that can be found here.

React Native Requirements
iOS Setup
- NOTE: Start downloading Xcode first since it's a large file
Android Setup

Packages and Software

Install homebrew. We’ll be using Homebrew to install many of the other required tools through the command line. Open a terminal and Copy and paste the command from brew.sh into your terminal and run it
Install nvm Node Version Manager While not required, it makes it easy to install Node and switch between different versions. A minimum Node version of 18 (verify version in .nvmrc) is required to use this repository.
- Copy the curl command listed under Install & Update Script on this page and run it in your terminal.
- To make sure nvm installed correctly, try running nvm -v (you may need to re-source your shell with source {base config}). It should return a version number. If it returns something like zsh: command not found: nvm, it hasn’t been installed correctly.

Install node

Run the following command in your terminal:

nvm install 18
nvm use 18

Quit and re-open the terminal, and then run to confirm that v18 is running

> node -v
v18.20.4

Alternatively, to automatically try to find and use an .nvmrc file in your workspace, per the official nvm docs for zsh, add the following script to your shell (typically ~/.zshrc on mac):

# place this after nvm initialization!
autoload -U add-zsh-hook

load-nvmrc() {
  local nvmrc_path
  nvmrc_path="$(nvm_find_nvmrc)"

  if [ -n "$nvmrc_path" ]; then
    local nvmrc_node_version
    nvmrc_node_version=$(nvm version "$(cat "${nvmrc_path}")")

    if [ "$nvmrc_node_version" = "N/A" ]; then
      nvm install
    elif [ "$nvmrc_node_version" != "$(nvm version)" ]; then
      nvm use
      # Optionally, add `>/dev/null 2>&1` after `nvm use` to suppress output
    fi
  elif [ -n "$(PWD=$OLDPWD nvm_find_nvmrc)" ] && [ "$(nvm version)" != "$(nvm version default)" ]; then
    echo "Reverting to nvm default version"
    nvm use default
  fi
}

add-zsh-hook chpwd load-nvmrc
load-nvmrc

Install yarn. We use yarn as our package manager and to run scripts.

Run the following command to install it (npm comes with node, so it should work if the above step has been completed correctly)
```
npm install --global yarn
```
Check version to verify installation
```
> yarn -v
3.2.3
```
Install ruby

Use rbenv to install a specific version of ruby:
```
brew install rbenv ruby-build
```
Run init and follow the instructions to complete the installation.
```
rbenv init
```
After following the instructions, make sure you source your .zshrc or .bash_profile, or start a new terminal session.

Install a version of ruby and set as the default.
```
rbenv install 3.2.2
rbenv global 3.2.2
```
Install cocoapods and fastlane using bundler (make sure to run in mobile)
```
bundle install
```
Note: In the case you run into permission issues when installing ruby, you may need to add some permissions to make it work.

iOS Setup

Xcode

You should start with downloading Xcode if you don't already have it installed, since the file is so large. You can find it here: developer.apple.com/xcode

You must use XCode 15 to compile the app. Older versions of xCode can be found here.

Add Xcode Command Line Tools

Open Xcode and go to:

Preferences → Locations → Command Line Tools

Select the version that pops up.

Android Setup

Install Android Studio
Install the JDK. Taken from RN instructions
```
brew install --cask zulu@17

# Get path to where cask was installed to double-click installer
brew info --cask zulu@17
```
Add the following to your .rc file export JAVA_HOME=/Library/Java/JavaVirtualMachines/zulu-17.jdk/Contents/Home

Also verify that in Android Studio it is using the correct JDK.

Add the following to your .rc file

export ANDROID_HOME=$HOME/Library/Android/sdk
export PATH=$PATH:$ANDROID_HOME/emulator
export PATH=$PATH:$ANDROID_HOME/platform-tools

Install an emulator. Android Studio should have an emulator already, but if not: Open the project at universe/apps/mobile/android Tools -> Device Manager to create a new emulator

Deploying to Physical Android Device

Enable developer mode on Android
- Open Settings
- Tap About phone or About device
- Tap Software information
- Tap Build number seven times in a row
- A message will appear when you're close to enabling Developer mode
- Enable USB Debugging: Go to Developer Options in settings and enable USB Debugging
Connect device and Allow communication
- Pop up message must appear and enable transfer.
- Run the following command to verify your device has been detected: adb devices

In your terminal run

adb reverse tcp:8081 tcp:8081
yarn mobile android

If it fails, quit the terminal and run it directly from Android Studio. Once you get the first build running, retry the previous step.

Development

Once all the setup steps above are completed, you're ready to try running the app locally!

Environment variables

Note: The app will likely have limited functionality when running it locally with the default environment variables.

Use the environment variables defined in the .env.defaults.local file to run the app locally.

You can use the command yarn mobile env:local:download if you have the 1password CLI to copy that file to your root folder.

Compile contract ABI types

This is done in bootstrap but good to know about. Before the code will compile you need to generate types for the smart contracts the wallet interacts with. Run yarn g:prepare at the top level. Re-run this if the ABIs are ever changed.

Run the app

In the root directory, run yarn to install all the necessary npm packages.

Then run yarn mobile pod to install all the necessary pods. (You may need to updated source repos with pod repo update if this fails.)

Finally, run yarn mobile ios to boot up the iOS Simulator and run the app inside it. The JS bundler (metro) should automatically open in a new terminal window. If it does not, start it manually with yarn start.

Or you can use one command to run them all one after the other: yarn && yarn pod && yarn ios

You can also run the app from Xcode, which is necessary for any Swift related changes. Xcode will automatically start the metro bundler.

Hopefully you now (after a few minutes) see the Uniswap Wallet running in the iOS Simulator!

Running on a Physical iOS Device

Follow all steps listed above.
Sign into your @uniswap.org Apple ID (Cmd + , -> Accounts tab) + download provisioning profiles
Connect your iOS device + follow the on-screen prompts to trust your computer
Select the Uniswap target + your connect device, then Cmd + R or use the ▶️ button the start the build
You may get an error about your device not yet being added to the Uniswap Apple Developer account; if so, click Register and restart the build

Enabling Flipper

We do not check Flipper into source. To prevent pod install from adding Flipper, set an environment variable in your .bash_profile or .zshrc or .zprofile:

# To enable flipper inclusion (optional)
export USE_FLIPPER=1

Note: To disable Flipper, the whole line should be commented out, as setting this value to 0 will not disable Flipper.

Important Libraries and Tools

These are some tools you might want to familiarize yourself with to understand the codebase better and how different aspects of it work.

Redux and Redux Toolkit: state management
redux-saga & typed-redux-saga: Redux side effect manager -- used for complex/stateful network calls
ethers
Tamagui: UI framework
React navigation: routing and navigation with animations and gestures
react-i18next: i18n

Migrations

We use redux-persist to persist the Redux state between user sessions. Most of this state is shared between the mobile app and the extension. Please review the Wallet Migrations README for details on how to write migrations when you add or remove anything from the Redux state structure.

Troubleshooting

Common issues

zsh: command not found: [package name] This means whichever package you're trying to run ([package name]) wasn’t correctly installed, or your Terminal can’t figure out how to run it. If you just installed it, try quitting terminal and re-opening it. Otherwise try reinstalling the package.
Failed to load 'glog' podspec: Resolve this issue by checking the path of Xcode, make sure is inside Applications and with the name Xcode Once confirm run the following commands:

sudo xcode-select --switch /Applications/Xcode.app pod install

unable to open file (in target "OneSignalNotificationServiceExtension" in project "Uniswap"). Resolve this issue by navigating to the ios/ directory and running pod update.
Build target hermes-engine: Command PhaseScriptExecution failed with a nonzero exit code Node isn't being located correctly during the build phase. Run which node and copy the resulting path into .xcode.env.local. More context here.
CocoaPods could not find compatible versions for pod "hermes-engine" The following commands can help you fix these types of errors:

cd ios && pod install --repo-update cd ios && pod repo update cd ios && pod update hermes-engine --no-repo-update

Context: https://uniswapteam.slack.com/archives/C02GYG8TU12/p1692640189802989?thread_ts=1692635970.952869&cid=C02GYG8TU12

Common fixes

If something isn’t working the way it should or you’re getting a weird error when trying to run the app, try the following:

Quit the terminal
Quit Metro terminal
Open Finder and navigate to the mobile directory
Delete the node_modules folder
Navigate into the ios folder
Delete the Pods folder
Open XCode
Go to Product → Clean Build Folder
Open your terminal again
Navigate to the mobile directory in the terminal
Run yarn && yarn pod again
Run yarn ios

Shell profile setup

Your shell profile file is most likely one of: .bash_profile, .zshrc, or .zprofile, and will be located in /Users/[username]/. You can reveal hidden files in Finder by pressing ⌘ + Shift + ..

If issues with your terminal or shell seem to be the cause of some of your problems, here is an example of what that file may look like in order for your terminal to be able to run the app locally:

eval "$(/opt/homebrew/bin/brew shellenv)"

export NVM_DIR="$HOME/.nvm"
[ -s "/opt/homebrew/opt/nvm/nvm.sh" ] && \. "/opt/homebrew/opt/nvm/nvm.sh"  # This loads nvm
[ -s "/opt/homebrew/opt/nvm/etc/bash_completion.d/nvm" ] && \. "/opt/homebrew/opt/nvm/etc/bash_completion.d/nvm"  # This loads nvm bash_completion

# To enable flipper inclusion (optional)
export USE_FLIPPER=1
export PATH="/opt/homebrew/opt/ruby/bin:$PATH"

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Uniswap Wallet

Setup

Packages and Software

iOS Setup

Xcode

Add Xcode Command Line Tools

Android Setup

Deploying to Physical Android Device

Development

Environment variables

Compile contract ABI types

Run the app

Running on a Physical iOS Device

Enabling Flipper

Important Libraries and Tools

Migrations

Troubleshooting

Common issues

Common fixes

Shell profile setup

Files

README.md

Latest commit

History

README.md

File metadata and controls

Uniswap Wallet

Setup

Packages and Software

iOS Setup

Xcode

Add Xcode Command Line Tools

Android Setup

Deploying to Physical Android Device

Development

Environment variables

Compile contract ABI types

Run the app

Running on a Physical iOS Device

Enabling Flipper

Important Libraries and Tools

Migrations

Troubleshooting

Common issues

Common fixes

Shell profile setup