Skip to content

Latest commit

 

History

History
81 lines (63 loc) · 3.22 KB

File metadata and controls

81 lines (63 loc) · 3.22 KB

Introduction

The files in this directory can be used to build a modified Kata Containers rootfs and kernel with modifications to support Intel® QuickAssist Technology (QAT) hardware. It is designed to work with Kata Container versions 2.0 and higher.

To properly load the driver modules, systemd init must be used. It is not adequate to use the agent as the init. Because of this, alpine is not a valid base OS image to use. The following rootfs OS's have been tested with this Dockerfile.

  • Clear Linux
  • Debian
  • Ubuntu

The generated files will need to be copied and configured into your Kata Containers setup.

Please see the Using Intel® QuickAssist Technology and Kata documentation for more specific details on how to configure a host system and enable acceleration of workloads.

Building

The image build and run are executed using Docker, from within this QAT folder. It is required to use all the files in this directory to build the Docker image:

$ docker build --label kataqat --tag kataqat:latest . 
$ mkdir ./output
$ docker run -ti --rm --privileged -v /dev:/dev -v $(pwd)/output:/output kataqat

Note: The use of the --privileged and -v /dev:/dev arguments to the docker run are necessary, to enable the scripts within the container to generate a roofs file system.

When complete, the generated files will be placed into the output directory. Sample config files that have been modified with a [SHIM] section are also placed into the config subdirectory as a reference that can be used with Kata Containers.

# ls -lR output
output:
total 136656
drwxr-xr-x 2 root root      4096 Feb 11 23:59 configs
-rw-r--r-- 1 root root 134217728 Feb 11 23:59 kata-containers.img
-rw-r--r-- 1 root root   5710336 Feb 11 23:59 vmlinuz-kata-linux-5.4.71-84_qat

output/configs:
total 20
-rw-r--r-- 1 root root 4082 Feb 11 23:59 200xxvf_dev0.conf
-rw-r--r-- 1 root root 4082 Feb 11 23:59 c3xxxvf_dev0.conf
-rw-r--r-- 1 root root 4082 Feb 11 23:59 c6xxvf_dev0.conf
-rw-r--r-- 1 root root 4082 Feb 11 23:59 d15xxvf_dev0.conf
-rw-r--r-- 1 root root 4082 Feb 11 23:59 dh895xccvf_dev0.conf

Options

A number of parameters to the scripts are configured in the Dockerfile, and thus can be modified on the commandline. The AGENT_VERSION is not set and by default will use the latest stable version of Kata Containers.

Variable Definition Default value
AGENT_VERSION Kata agent that is installed into the rootfs
KATA_REPO_VERSION Kata Branch or Tag to build from main
OUTPUT_DIR Directory inside container where results are stored /output
QAT_CONFIGURE_OPTIONS configure options for QAT driver --enable-icp-sriov=guest
QAT_DRIVER_URL URL to curl QAT driver from https://01.org/sites/default/files/downloads/${QAT_DRIVER_VER}
QAT_DRIVER_VER QAT driver version to use qat1.7.l.4.9.0-00008.tar.gz
ROOTFS_OS Operating system to use for the rootfs ubuntu

Variables can be set on the docker run commandline, for example:

$ docker run -ti --rm --privileged -e "AGENT_VERSION=2.0.0" -v /dev:/dev -v ${PWD}/output:/output kataqat