-
Hi, first of all thank you for your great effort you putting in this project! I'm getting use to it on all my smartphones and also was finding the right charging switches for each device. Actually I'm fiddling with my Pixel 5. If I plug the charger in at a charging (capacity) level of the battery which is lower then the desired 'resume_capacity' level in the config, the device will charge up fine until its 'pause_capacity' level and will enter then idle mode (if the charging switch does support this) or will stop charging until the capacity level falls below its threshold. If I now change the charging profile (with AccA for example) and the capacity level is higher than the configured capacity level in the config the device will enter directly into idle mode if I plug in the charger. Because I like to just let the battery drain itself to the capacity level I configured in the config and prevent staying at a higher percentage (idle mode), I'm looking for a way to get the best out of both worlds. One example. How do I get these highlighted behaviour? Thanks in advance! |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment
-
Hi, * Some devices only have idle mode switches. The Motorola Moto G4 Play is an example. acc_v2022.5.25-dev_202205250_0935.zip |
Beta Was this translation helpful? Give feedback.
Hi,
The latest dev build has this feature.
One does not have to do anything to enable it. ACC will always avoid idle mode above
pause_capacity
, if possible*.* Some devices only have idle mode switches. The Motorola Moto G4 Play is an example.
acc_v2022.5.25-dev_202205250_0935.zip
https://t.me/+jN081M2459M5Mjhk (a Telegram group for testing dev builds).