Voron 2 Mobius Extruder with BondTech gears

Author: Maglin

Mods/Hackdoggo/V2/BMGobius/README.txt

@@ -0,0 +1,25 @@
+This is a modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears.
+https://github.com/mzbotreprap/VORON/tree/master/STLs/VORON2/VORON%20Mobius
+
+You will need to substitue the 45mm long 5mm diameter shaft for a 60mm long shaft
+2x M3x20
+1x M3x12
+2x M3 Nuts
+2x M3 Washers
+
+The rest of the hardware is the same with the obvious replacement of the MK8 and bearing with Bondtech drivegears.
+
+BMGobius Specific Parts to Print:
+
+BMGobius Body A
+BMGobius Body B
+BMGobius Idler A
+BMGobius Idler B
+
+Stock Mobius Parts:
+tensioner_dial
+mobius_mount
+jog_dial
+bsp_adapter
+
+Remember to put a dab of butter or your choice of lube on the gear section of the drive gears and the roller bearings.