Back to README.md

🖨️ My printer

Stock Voron 2.4r2 350mm (current)
- E3D v6 w/ 0.4mm nozzle

⚙️ My config - using Prusaslicer 2.6.0-rc1

Print

Anything not mentioned is either irrelevant or probably standard. These settings are for my Voron 2.4

Layers and Perimeters

Parameter	Value
Layer height	0.15mm
First layer height	0.2mm
Perimeters	3
Solid top layers	6
Solid bottom layers	5
Thick bridges	☑
Detect bridging perimeters	☑
Fill gaps	☑
Perimeter generator	Arachne

Infill, Skirts and Supports

Parameter	Value
Fill density	15%
Fill pattern	Gyroid or Cubic

Skirt loops	3 (maybe overkill and irrelevant to the print)

Support style	Organic
Top contact Z	0.15mm
Bottom contact Z	0.15mm
Interface layers	1

Speeds

This is very printer-dependent. Don't blindly copy this.

Parameter	Value
Perimeters	100mm/s
Small perimeters	40mm/s
External perimeters	40mm/s
Infill	125mm/s
Solid infill	120mm/s
Top solid infill	50mm/s
Supports	90mm/s
Support interface	70mm/s
Bridges	60mm/s
Gap fill	40mm/s
First layer speed	30mm/s

Filament

Sunlu Marble PLA+

Parameter	Value
Diameter	1.75mm
Extrusion multiplier	1
Nozzle temp.	205°C
Bed temp.	60°C