- Based on Allwinner V853
- Cortex-A7 Core up to 1200MHz
- RISC-V E907GC@600MHz
- 1Tops@int8 NPU
- Built in 512MB/1GB DDR3 memory
- One TF Card Slot, Support UHS-SDR104
- On board SPI NAND / 8/32G Emmc
- On board USB&UART Combo
- Supports one 2/4-lane MIPI CSI inputs
- Supports 1 individual ISP, with maximum resolution of 2560 x 1440
- H.264/H.265 decoding at 4096x4096
- H.264/H.265 encoder supports 3840x2160@20fps
- Online Video encode
- RISC-V E907 RTOS Support, Based on RT-Thread + RTOS-HAL
Name | Function | Path |
---|---|---|
hello world | Minimal program example, prints Hello World | hello_world |
init dram | Initializes the serial port and DRAM | init_dram |
read chip efuse | Reads chip efuse information | read_chip_efuse |
read chipsid | Reads the unique ID of the chip | read_chipsid |
load e907 | Reads the e907 core firmware, starts the e907 core, and uses V851s as a large RISC-V microcontroller (E907 @ 600 MHz with 64MB memory) | load_e907 |
syter boot | Bootstrapping function that replaces U-Boot, enabling fast system startup for Linux | syter_boot |
syter boot_spi | Bootstrapping function that replaces U-Boot, enabling fast system startup for Linux for SPI NAND, SPI NOR | syter_boot_spi |
syter amp | Reads the e907 core firmware, starts the e907 core, loads the kernel, and runs Linux simultaneously on both e907 and a7 systems, which are heterogeneously integrated | syter_amp |
fdt parser | Reads the DTB and Parser Print out | fdt_parser |
fdt cli | Reads the DTB with a CLI support uboot fdt command | fdt_cli |
syter bootargs | Bootstrapping function that replaces U-Boot, enabling fast system startup for Linux, Within a CLI to change bootargs | syter_bootargs |
cli test | Test baisc CLI function | cli_test |
i2c oled | i2c_oled |
|
i2c test | i2c_test |
|
spi lcd | spi_lcd |
|
syter boot spi | syter_boot_spi |
-
MIPI GC2053 Camera: https://item.taobao.com/item.htm?id=706864521673&skuId=5213471339193
-
MIPI DSI 800x480 Display: https://item.taobao.com/item.htm?id=706091265930