Merge pull request #118 from adafruit/net-fsm

Better network handling

Author: brentru

Makefile

@@ -7,7 +7,7 @@ PROJECT_VER_MAJOR     := 1
 PROJECT_VER_MINOR     := 0
 PROJECT_VER_PATCH     := 0
 PROJECT_VER_BUILD     := beta
-PROJECT_VER_BUILD_NUM := 3
+PROJECT_VER_BUILD_NUM := 4
 
 BOARD_PYPORTAL 		:= samd51-pyportal
 BOARD_METRO_AIRLIFT := samd51-metro-airlift
@@ -50,7 +50,7 @@ clean-esp32s2: clean-esp32s2-funhouse clean-esp32s2-metro clean-esp32s2-magtag
 
 esp32s2-magtag:
 			mkdir -p build/$(BOARD_MAGTAG_S2)/
-			arduino-cli compile --fqbn esp32:esp32:adafruit_magtag29_esp32s2:SerialMode=cdc,PSRAM=enabled,PartitionScheme=default,CPUFreq=240,FlashMode=qio,FlashFreq=80,FlashSize=4M,UploadSpeed=921600,DebugLevel=none,USBStack=tinyusb -e  examples/Wippersnapper_demo/Wippersnapper_demo.ino
+			arduino-cli compile --fqbn esp32:esp32:adafruit_magtag29_esp32s2:SerialMode=cdc,PSRAM=enabled,PartitionScheme=default,CPUFreq=240,FlashMode=qio,FlashFreq=80,FlashSize=4M,UploadSpeed=921600,DebugLevel=verbose,USBStack=tinyusb -e  examples/Wippersnapper_demo/Wippersnapper_demo.ino
 			python3 $(UF2CONV) examples/Wippersnapper_demo/build/esp32.esp32.adafruit_magtag29_esp32s2/Wippersnapper_demo.ino.bin -f $(UF2_FAMILY_ESP32S2) -b $(UF2_BASE_ESP32S2) -o build/esp32s2-magtag/$(PROJECT_NAME)-$(BOARD_MAGTAG_S2)-$(PROJECT_VER_MAJOR)-$(PROJECT_VER_MINOR)-$(PROJECT_VER_PATCH)-$(PROJECT_VER_BUILD).$(PROJECT_VER_BUILD_NUM).uf2
 
 clean-esp32s2-magtag:
@@ -59,7 +59,7 @@ clean-esp32s2-magtag:
 
 esp32s2-metro:
 			mkdir -p build/$(BOARD_METRO_S2)/
-			arduino-cli compile --fqbn esp32:esp32:adafruit_metro_esp32s2:SerialMode=cdc,PSRAM=enabled,PartitionScheme=default,CPUFreq=240,FlashMode=qio,FlashFreq=80,FlashSize=4M,UploadSpeed=921600,DebugLevel=none,USBStack=tinyusb -e  examples/Wippersnapper_demo/Wippersnapper_demo.ino
+			arduino-cli compile --fqbn esp32:esp32:adafruit_metro_esp32s2:SerialMode=cdc,PSRAM=enabled,PartitionScheme=default,CPUFreq=240,FlashMode=qio,FlashFreq=80,FlashSize=4M,UploadSpeed=921600,DebugLevel=verbose,USBStack=tinyusb -e  examples/Wippersnapper_demo/Wippersnapper_demo.ino
 			python3 $(UF2CONV) examples/Wippersnapper_demo/build/esp32.esp32.adafruit_metro_esp32s2/Wippersnapper_demo.ino.bin -f $(UF2_FAMILY_ESP32S2) -b $(UF2_BASE_ESP32S2) -o build/esp32s2-metro/$(PROJECT_NAME)-$(BOARD_METRO_S2)-$(PROJECT_VER_MAJOR)-$(PROJECT_VER_MINOR)-$(PROJECT_VER_PATCH)-$(PROJECT_VER_BUILD).$(PROJECT_VER_BUILD_NUM).uf2
 
 clean-esp32s2-metro:

examples/Wippersnapper_demo/Wippersnapper_demo.ino

@@ -26,14 +26,7 @@ void setup() {
   Serial.begin(115200);
   //while (!Serial) delay(10);
 
-  // Set Adafruit IO credentials
-  wipper.set_user_key();
-  // Set WiFi credentials
-  wipper.set_ssid_pass();
-
-  Serial.println("Connecting to WipperSnapper");
   wipper.connect();
-  Serial.print("Connected to WipperSnapper!");
 
 }