PrusaSlicer-settings

Monoprice (MP Mini Delta)

CHANGES

0.1.0

Restructure and label in keeping Prusa's conventions for its settings profiles
Configure bed model, texture, and thumbnail files to integrate with PrusaSlicer 2.3.0
Add Generic filament profiles for PLA, PETG, and TPU
Overhaul print profiles

0.0.9

Change some names and labels to be more consistent
Adjust retraction settings for Marlin's "Linear Advance"

0.0.8

Change printer id from MiniDelta to MPMD
Change PET to PETG to match Prusa's filament work
Change filament vendor from null to "Generic"
Add bed_model entry

0.0.7

Rework/revert start gcode for mpmd_marlin_1.1.x firmware. The change in the previous release does not work well with the firmware that limits the peak power consumption (for use with the printer's stock 60-watt power adapter) -- often causing a "thermal runaway" fault in the printer. Heating or pre-heating the nozzle before heating the bed mostly avoids this situation.

0.0.6

Rework start gcode for mpmd_marlin_1.1.x firmware (119r02+) Heat and wait for bed temperature before heating the hot end.
Bump overall speeds for SIMPLE settings.

0.0.5

Rework start gcode for mpmd_marlin_1.1.x firmware (119r02+)

0.0.4

Start gcode adjusted for MPMD4Marlin firmware (v1.3.3)

0.0.3

Ok settings for Monoprice Mini Delta (OEM firmware)