diff --git a/intel_lpmd/intel_lpmd_config.xml b/intel_lpmd/intel_lpmd_config.xml
new file mode 100644
index 0000000..9c9a0e2
--- /dev/null
+++ b/intel_lpmd/intel_lpmd_config.xml
@@ -0,0 +1,106 @@
+<?xml version="1.0"?>
+
+<!--
+Specifies the configuration data
+for Intel Low Power Mode daemon
+-->
+
+<Configuration>
+	<!--
+		CPU format example: 1,2,4..6,8-10
+	-->
+	<lp_mode_cpus></lp_mode_cpus>
+
+	<!--
+		Mode values
+		0: Cgroup v2
+		1: Cgroup v2 isolate
+		2: CPU idle injection
+	-->
+	<Mode>0</Mode>
+
+	<!--
+		Default behavior when Performance power setting is used
+		-1: force off. (Never enter Low Power Mode)
+		 1: force on. (Always stay in Low Power Mode)
+		 0: auto. (opportunistic Low Power Mode enter/exit)
+	-->
+	<PerformanceDef>-1</PerformanceDef>
+
+	<!--
+		Default behavior when Balanced power setting is used
+		-1: force off. (Never enter Low Power Mode)
+		 1: force on. (Always stay in Low Power Mode)
+		 0: auto. (opportunistic Low Power Mode enter/exit)
+	-->
+	<BalancedDef>-1</BalancedDef>
+
+	<!--
+		Default behavior when Power saver setting is used
+		-1: force off. (Never enter Low Power Mode)
+		 1: force on. (Always stay in Low Power Mode)
+		 0: auto. (opportunistic Low Power Mode enter/exit)
+	-->
+	<PowersaverDef>-1</PowersaverDef>
+
+	<!--
+		Use HFI LPM hints
+		0 : No
+		1 : Yes
+	-->
+	<HfiLpmEnable>0</HfiLpmEnable>
+
+	<!--
+		Use HFI SUV hints
+		0 : No
+		1 : Yes
+	-->
+	<HfiSuvEnable>0</HfiSuvEnable>
+
+	<!--
+		System utilization threshold to enter LP mode
+		from 0 - 100
+		clear both util_entry_threshold and util_exit_threshold to disable util monitor
+	-->
+	<util_entry_threshold>10</util_entry_threshold>
+
+	<!--
+		System utilization threshold to exit LP mode
+		from 0 - 100
+		clear both util_entry_threshold and util_exit_threshold to disable util monitor
+	-->
+	<util_exit_threshold>95</util_exit_threshold>
+
+	<!--
+		Entry delay. Minimum delay in non Low Power mode to
+		enter LPM mode.
+	-->
+	<EntryDelayMS>0</EntryDelayMS>
+
+	<!--
+		Exit delay. Minimum delay in Low Power mode to
+		exit LPM mode.
+	-->
+	<ExitDelayMS>0</ExitDelayMS>
+
+	<!--
+		Lowest hysteresis average in-LP-mode time in msec to enter LP mode
+		0: to disable hysteresis support
+	-->
+	<EntryHystMS>0</EntryHystMS>
+
+	<!--
+		Lowest hysteresis average out-of-LP-mode time in msec to exit LP mode
+		0: to disable hysteresis support
+	-->
+	<ExitHystMS>0</ExitHystMS>
+
+	<!--
+		Ignore ITMT setting during LP-mode enter/exit
+		0: disable ITMT upon LP-mode enter and re-enable ITMT upon LP-mode exit
+		1: do not touch ITMT setting during LP-mode enter/exit
+	-->
+	<IgnoreITMT>0</IgnoreITMT>
+
+</Configuration>
+