Skip to content

Latest commit

 

History

History
661 lines (501 loc) · 28.4 KB

README-LOAD-TESTING.md

File metadata and controls

661 lines (501 loc) · 28.4 KB

Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to you under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

 https://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

README-LOAD-TESTING

Contains instructions to load test Apache Fortress using the Apache Maven Jmeter plugin.

Table of Contents

  1. Typical deployment
  2. Load the security policy
  3. Find the Jmeter config files
  4. Setting the jmeter parameters
  5. Configure Log4j2
  6. Run the tests
  7. Understanding the tests
  8. Troubleshooting

1. Typical deployment

            .--------------.      
            |     Maven    |      
            '-------.------'      
                    | in-process
            .-------'-------.
            | Jmeter plugin |
            '-------.-------'
                    | in-process
            .-------'------.
            | FortressCore |
            '-------.------'
                    | LDAPS
          .---------'-------.
          | DirectoryServer |
          '-----------------'
  • Uses the mvn verify command to invoke maven jmeter plugin which then executes jmeter tests running various fortress core test cases.

2. Load the security policy

mvn install -Dload.file=./ldap/setup/JmeterTestPolicy.xml
  • Loads a test security policy used in the subsequent jmeter test cases. For example, the test users may be assigned a particular role that's provisioned here.

3. Find the Jmeter config files

  • These metadata files contain parameters that correspond with each test case.

A. Add User:

B. Del User:

C. Check User:

D. Create Session:

E. Bind User:

F. Check Access:

G. Check Role:

H. Session Perms:

I. Add Role:

J. Del Role:

K. Assign User:

L. Deassign User:

M. Add Permission:

N. Del Permission:

O. Grant Permission:

P. Revoke Permission:

4. Setting the jmeter parameters

These settings affect the length, duration, and the number of threads:

  • LoopController.continue_forever: boolean value, if false, test duration is controlled by numbers of loops and threads.
  • LoopController.loops: integer value, contains the number of iterations each thread performs the test function.
  • ThreadGroup.num_threads: integer value, contains the number of threads to use in the test.
  • ThreadGroup.ramp_time: integer value, number of seconds for starting threads. A rule of thumb, set to same as num_threads.

For example:

src/test/jmeter/AddUser.jmx jmeter config file:
<ThreadGroup guiclass="ThreadGroupGui" testclass="ThreadGroup" testname="Fortress AddUser" enabled="true">
    ...
    <elementProp name="ThreadGroup.main_controller" ...>
        <boolProp name="LoopController.continue_forever">false</boolProp>
        <stringProp name="LoopController.loops">1000</stringProp>
    </elementProp>
    <stringProp name="ThreadGroup.num_threads">10</stringProp>
    <stringProp name="ThreadGroup.ramp_time">10</stringProp>
    ...
</ThreadGroup>
  • This test starts ten threads in ten seconds. Each thread executes the test case 1000 times before terminating.

5. Configure Log4j2

The jmeter-maven-plugin log4j config file, log4j2.xml must be present in the src/test/conf folder.

src/test/conf/log4j2.xml config file:
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
    <Appenders>
        <File name="file" fileName="fortress-jmeter.log" append="true">
            <PatternLayout pattern="%d{yyyy-MM-dd HH:mm:sss} %-5p %c{1}:%L - %m%n"/>
        </File>
        <Console name="console" target="SYSTEM_OUT">
            <PatternLayout pattern="%d{yyyy-MM-dd HH:mm:sss} %-5p %c{1}:%L - %m%n"/>
        </Console>
    </Appenders>
    <Loggers>
        <Logger name="org.apache.directory.api" level="info"/>
        <Logger name="org.apache.directory.fortress.core" level="info"/>
        <Root level="warn">
            <AppenderRef ref="file"/>
        </Root>
    </Loggers>
</Configuration>

Tips:

  • Use course-grained logging and a file appender for application logging.
  • Use console output for viewing the jmeter test progress.
  • Use the jmeter and log4j log files (more later) when troubleshooting and reporting.

More info on testing with the jmeter-maven-plugin:

6. Run the tests

Overview of the tests

The tests run from the command line as a maven profile.

Name Usage
add users mvn verify -Ploadtest -Dtype=AddUser [args]
del users mvn verify -Ploadtest -Dtype=DelUser [args]
user check mvn verify -Ploadtest -Dtype=CheckUser [args]
create session mvn verify -Ploadtest -Dtype=CreateSession [args]
bind user mvn verify -Ploadtest -Dtype=BindUser [args]
check access mvn verify -Ploadtest -Dtype=CheckAccess [args]
check role mvn verify -Ploadtest -Dtype=CheckRole [args]
session perms mvn verify -Ploadtest -Dtype=SessionPerms [args]
add roles mvn verify -Ploadtest -Dtype=AddRole [args]
del roles mvn verify -Ploadtest -Dtype=DelRole [args]
assign user mvn verify -Ploadtest -Dtype=AssignUser [args]
deassign user mvn verify -Ploadtest -Dtype=DeassignUser [args]
grant perm mvn verify -Ploadtest -Dtype=GrantPerm [args]
revoke perm mvn verify -Ploadtest -Dtype=RevokePerm [args]

Description of runtime arguments

These may be injected into the runtime as Java system (-D) command-line arguments or jmeter params:

Name Type Test Jmeter param Java system prop Description Example Default
batchsize Integer not AddUser,DelUser True True Number of users to iterate over when checking authN and/or authZ. batchsize=1000 10
duplicate Integer AddUser,DelUser False True Duplicate operation after specified interval. duplicate=1000 none (don't duplicate)
hostname String all False True Useful for distributing the load in a multi-provider env. Will override fortress.properties. hostname=foo none
ou String AddUser,AddPerm True True The group name name=localhost-A1-1 none
password String not DelUser True True The password used by test users password=newsecret secret
perm String CheckUser,CheckAccess, AddPerm,DelPerm,GrantPerm,RevokePerm True True Format is objectName.operationName perm=jmeterobject.oper none
qualifier String all True True Part of the userid: hostname + qualifier + counter. qualifier=A1 none
role String AddUser,CheckRole,AddRole,DelRole,AssignUser,DeassignUser True True The role name role=jmeterrole none
sleep Integer all True True Sleep this many milliseconds after op. sleep=30 none (no sleep)
update Boolean AddUser True True Edit user's description. update=true false
verify Boolean AddUser,DelUser True True e.g. read after op to verify success. verify=true false
  • Java system properties take precedence over params set in the Jmeter config files.

Examples of jmeter tests

From FORTRESS_HOME folder, enter the following command from a system prompt:

A. Add Users:
  • Update and/or role assignments are optional operations.
mvn verify -Ploadtest -Dtype=AddUser -Dqualifier=A1 -Dverify=true -Dsleep=30 -Dupdate=true -Dou=loadtestu -Drole=jmeterrole -Dpassword=secret

This test adds users. The following system properties are passed on the command line to define behavior:

name=value Usage
type=AddUser run the AddUser test case
qualifier=A1 construct userid: hostname + qualifier + counter
verify=true read after operation to verify success
sleep=30 sleep this many milliseconds between ops
update=true edit user's description if set to true
ou=loadtestu orgunit is required on fortress users
role=jmeterrole role assignments are optional
password=secret optional override to default password
  • It may be more convenient to set these in the jmeter config files instead. Choose the approach that works in your test setup.
B. Delete Users:
mvn verify -Ploadtest -Dtype=DelUser -Dqualifier=A1

Here the delete user is being called. It requires only a qualifier to identify the batch of users being targeted.

C. Check Users:

Performs createSession followed by optional calling checkAccess.

mvn verify -Ploadtest -Dtype=CheckUser -Dqualifier=A1 -Dperm=jmeterobject.oper -Dbatchsize=10000

Arguments:

name=value Usage
type=CheckUser run the CheckUser test case
qualifier=A1 construct userid: hostname + qualifier + counter
perm=jmeterobject.oper calls checkAccess if set. Format: objectName.operationName
batchsize=10000 we have 10000 users in our batch
D. Create Session:

Performs createSession only.

mvn verify -Ploadtest -Dtype=CreateSession -Dqualifier=A1 -Dbatchsize=10000
E. Check Access:

Perform createSession and one checkAccess.

mvn verify -Ploadtest -Dtype=CheckAccess -Dqualifier=A1 -Dperm=jmeterobject.oper -Dbatchsize=10000

Arguments:

  • perm=jmeterobject.oper <-- Format: objectName.operationName.
F. Bind User:

Performs authentication.

mvn verify -Ploadtest -Dtype=BindUser -Dqualifier=A1 -Dbatchsize=10000
G. Check Role:

Performs createSession and isUserInRole.

mvn verify -Ploadtest -Dtype=CheckRole -Dqualifier=A1 -Drole=jmeterrole -Dbatchsize=10000
H. Session Perms:

Performs createSession and sessionPermissions.

mvn verify -Ploadtest -Dtype=SessionPerms -Dqualifier=A1 -Dbatchsize=10000
I. Add Role:
  • Add role entries to the directory.
mvn verify -Ploadtest -Dtype=AddRole -Dqualifier=A1
J. Delete Role:
  • Delete role entries from the directory.
mvn verify -Ploadtest -Dtype=DelRole -Dqualifier=A1
K. Assign User:
  • Assign users to roles.
mvn verify -Ploadtest -Dtype=AssignUser -Dqualifier=A1
L. Deassign User:
  • Deassign users from roles.
mvn verify -Ploadtest -Dtype=DeassignUser -Dqualifier=A1
M. Add Permission:
mvn verify -Ploadtest -Dtype=AddPerm -Dperm=foo.exe
N. Delete Permission:
mvn verify -Ploadtest -Dtype=DelPerm -Dperm=foo.exe
O. Grant Permission:
mvn verify -Ploadtest -Dtype=GrantPerm -Dperm=foo.exe -Drole=localhost-X2-78
P. Revoke Permission:
mvn verify -Ploadtest -Dtype=RevokePerm -Dperm=foo.exe -Drole=localhost-X2-78

7. Understanding the tests

A. Batch Size property

  • Required on the tests that perform operations like authentication or authorization.
  • Defines the size of the user set for a particular test. The default is 10.
  • Sets the global counter max, used to generate test userId.
mvn verify -Ploadtest -Dtype=BindUser -Dbatchsize=100 -Dqualifier=A1
  • The above test iterates over 100 users performing authentication.
src/test/jmeter/BindUser.jmx jmeter config file:
      <ThreadGroup guiclass="ThreadGroupGui" testclass="ThreadGroup" testname="Fortress BindUser" enabled="true">
        ...
        <elementProp name="ThreadGroup.main_controller" elementType="LoopController" guiclass="LoopControlPanel" testclass="LoopController" testname="Loop Controller" enabled="true">
          <stringProp name="LoopController.loops">500</stringProp>
        </elementProp>
        <stringProp name="ThreadGroup.num_threads">10</stringProp>
        ...
      </ThreadGroup>
  • 5,000 bind operations will occur during the test.
target/jmeter/results/[DATE]-BindUser.csv log file:
# notice the generated userids, localhost-A1-1, localhost-A1-2, localhost-A1-3
1688562906113,21,Fortress BindUser,,test completed TID: 19 UID: localhost-A1-1,Fortress BindUser 1-1,,true,,0,0,1,1,null,0,0,0
1688562906136,3,Fortress BindUser,,test completed TID: 19 UID: localhost-A1-2,Fortress BindUser 1-1,,true,,0,0,1,1,null,0,0,0
1688562906139,5,Fortress BindUser,,test completed TID: 19 UID: localhost-A1-3,Fortress BindUser 1-1,,true,,0,0,1,1,null,0,0,0
...
# when the counter == batchsize (100) it will reset to 1
1688562906455,4,Fortress BindUser,,test completed TID: 19 UID: localhost-A1-100,Fortress BindUser 1-1,,true,,0,0,2,2,null,0,0,0
1688562906455,3,Fortress BindUser,,test completed TID: 20 UID: localhost-A1-1,Fortress BindUser 1-2,,true,,0,0,2,2,null,0,0,0
1688562906459,3,Fortress BindUser,,test completed TID: 20 UID: localhost-A1-2,Fortress BindUser 1-2,,true,,0,0,2,2,null,0,0,0
...
# and keep doing that until the number of iterations (5,000) has been reached
1688562915035,2,Fortress BindUser,,test completed TID: 28 UID: localhost-A1-100,Fortress BindUser 1-10,,true,,0,0,1,1,null,0,0,0

B. Qualifier property.

  • The add test generates userids based on: hostname + qualifier + counter.
  • The counter is global across threads, so if you enable 20 threads * 100 loops:
src/test/jmeter/AddUser.jmx jmeter config file:
      <ThreadGroup guiclass="ThreadGroupGui" testclass="ThreadGroup" testname="Fortress AddUser" enabled="true">
        ...
        <elementProp name="ThreadGroup.main_controller" elementType="LoopController" guiclass="LoopControlPanel" testclass="LoopController" testname="Loop Controller" enabled="true">
          <stringProp name="LoopController.loops">100</stringProp>
        </elementProp>
        <stringProp name="ThreadGroup.num_threads">20</stringProp>
        ...
      </ThreadGroup>
  • with a qualifier = 'A1', 2,000 users will be added:
mvn verify -Ploadtest -Dtype=AddUser -Dqualifier=A1
target/jmeter/results/[DATE]AddUser.csv log file:
1688515254648,107,Fortress AddUser,,test completed TID: 19 UID: localhost-A1-1,Fortress AddUser 1-1,,true,,0,0,2,2,null,0,0,0
1688515254648,115,Fortress AddUser,,test completed TID: 20 UID: localhost-A1-2,Fortress AddUser 1-2,,true,,0,0,2,2,null,0,0,0
1688515254758,22,Fortress AddUser,,test completed TID: 19 UID: localhost-A1-3,Fortress AddUser 1-1,,true,,0,0,2,2,null,0,0,0
...
# the test stops after 2,000 iterations, adding users localhost-A1-1 - localhost-A1-2000
1688515271941,19,Fortress AddUser,,test completed TID: 37 UID: localhost-A1-2000,Fortress AddUser 1-19,,true,,0,0,1,1,null,0,0,0
  • If the same test runs a second time (before a delete run) it'll fail with duplicates as it tries to add the same users again.
  • This is the idea of the 'qualifier'. It defines test batches.
  • Change its value and create new batches.
  • DelUser work the same way. Delete the user in the A1 batch by running:
mvn verify -Ploadtest -Dtype=DelUser -Dqualifier=A1
  • The thread and loop properties in DelUser.jmx must match AddUser.jmx in order for the same size to be computed.

C. Verify property

  • When true, a read entry is performed after the write.
mvn verify -Ploadtest -Dtype=AddUser -Dqualifier=A1 -Dverify=true
  • Don't confuse the verify property with the maven verify target. One is required on all test invocations, the other optional.

D. Update property

  • When true, an update will be performed to the user's description field following the add.
mvn verify -Ploadtest -Dtype=AddUser -Dqualifier=A1 -Dupdate=true

E. Role property

  • If 'role' set as property, it will be assigned after the add. The role itself must already exist before being used in assignment to user.
mvn verify -Ploadtest -Dtype=AddUser -Dqualifier=A1 -Drole=jmeterrole
  • Tests that call checkAccess method (CheckUser, CheckAccess) will fail if role has not been assigned.
  • Tests that call isUserInRole method (CheckRole) will fail if not assigned.

F. Perm property

  • This param is optional in CheckUser and required in CheckAccess.
# will call checkAccess 10 times (if set) per test iteration:
mvn verify -Ploadtest -Dtype=CheckUser -Dperm=jmeterobject.oper -Dbatchsize=10000
# calls checkAccess once per test:
mvn verify -Ploadtest -Dtype=CheckAccess -Dperm=jmeterobject.oper -Dbatchsize=10000
  • These permissions must already exist (loaded via security policy) before running this test.
  • CheckUser will iterate over 10 perms, e.g. jmeter.oper1, jmeter.oper2, jmeter.oper3, ... jmeter.oper10
  • CheckUser picks a random number between 1 and 10 and uses that.

8. Troubleshooting

  • The first place to look is the standard out.
  • The files listed below contain additional info.

A. View the results

  • target/jmeter/results/[DATE]-AddUser.csv
  • target/jmeter/results/[DATE]-DelUser.jmx.csv
  • target/jmeter/results/[DATE]-CheckUser.csv
  • target/jmeter/results/[DATE]-CreateSession.csv
  • target/jmeter/results/[DATE]-CheckAccess.csv
  • target/jmeter/results/[DATE]-BindUser.csv
  • target/jmeter/results/[DATE]-CheckRole.csv
  • target/jmeter/results/[DATE]-SessionPerms.csv
  • target/jmeter/results/[DATE]-AddRole.csv
  • target/jmeter/results/[DATE]-DelRole.jmx.csv
  • target/jmeter/results/[DATE]-AssignUser.csv
  • target/jmeter/results/[DATE]-DeassignUser.jmx.csv
  • target/jmeter/results/[DATE]-AddPerm.csv
  • target/jmeter/results/[DATE]-DelPerm.jmx.csv
  • target/jmeter/results/[DATE]-GrantPerm.csv
  • target/jmeter/results/[DATE]-RevokePerm.jmx.csv

B. View the Log4j logs

if file logging enabled in log4j2.xml:

  • ./target/.../jmeter/bin/fortress-jmeter.log

Otherwise log4j outputs to console

C. Common Errors

i. jmeter tests fail java.lang.NoSuchMethodError

Happens when jmeter test instance can't load all of its classes. Ensure the required libs have been loaded.

[INFO] Executing test: AddUser.jmx
[INFO] Arguments for forked JMeter JVM: [java, -Xms1024M, -Xmx1024M, -Djava.awt.headless=true, -jar, ApacheJMeter-5.5.jar, -d, /home/smckinn/GIT/fortressDev/directory-fortress-core/target/b8ccc8a0-8845-4d34-aa10-b4ec7f50f4f5/jmeter, -j, /home/smckinn/GIT/fortressDev/directory-fortress-core/target/jmeter/logs/AddUser.jmx.log, -l, /home/smckinn/GIT/fortressDev/directory-fortress-core/target/jmeter/results/20230702-AddUser.csv, -n, -t, /home/smckinn/GIT/fortressDev/directory-fortress-core/target/jmeter/testFiles/AddUser.jmx, -Dsun.net.http.allowRestrictedHeaders, true, -Dqualifier, A10, -Dversion, 3.0.0-SNAPSHOT]
[INFO]  
[INFO] java.lang.NoSuchMethodError: 'void org.apache.logging.slf4j.Log4jLoggerFactory.<init>(org.apache.logging.slf4j.Log4jMarkerFactory)'
[INFO]  at org.apache.logging.slf4j.SLF4JServiceProvider.initialize(SLF4JServiceProvider.java:54)
[INFO]  at org.slf4j.LoggerFactory.bind(LoggerFactory.java:183)
[INFO]  at org.slf4j.LoggerFactory.performInitialization(LoggerFactory.java:170)
[INFO]  at org.slf4j.LoggerFactory.getProvider(LoggerFactory.java:455)
[INFO]  at org.slf4j.LoggerFactory.getILoggerFactory(LoggerFactory.java:441)
[INFO]  at org.slf4j.LoggerFactory.getLogger(LoggerFactory.java:390)
[INFO]  at org.slf4j.LoggerFactory.getLogger(LoggerFactory.java:416)
[INFO]  at org.apache.jmeter.JMeter.<clinit>(JMeter.java:113)
[INFO]  at java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
[INFO]  at java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
[INFO]  at java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
[INFO]  at java.base/java.lang.reflect.Constructor.newInstance(Constructor.java:490)
[INFO]  at org.apache.jmeter.NewDriver.main(NewDriver.java:257)
[INFO] JMeter home directory was detected as: /home/smckinn/GIT/fortressDev/directory-fortress-core/target/b8ccc8a0-8845-4d34-aa10-b4ec7f50f4f5/jmeter
[INFO] Completed Test: /home/smckinn/GIT/fortressDev/directory-fortress-core/target/jmeter/testFiles/AddUser.jmx
[INFO]  
[INFO] 
[INFO] --- tools:1.4:verify-legal-files (verify-legal-files) @ fortress-core ---
ii. jmeter error: Error in NonGUIDriver null

The current version of jmeter v5.6 requires

    <!-- Required for jmeter runtime. Fixes: Error in NonGUIDriver java.lang.NullPointerException -->
    <dependency>
      <groupId>org.apache.jmeter</groupId>
      <artifactId>jorphan</artifactId>
      <version>${version.jmeter.java}</version>
      <scope>test</scope>
    </dependency>

Sample error

[INFO] Executing test: AddUser.jmx
[INFO] Arguments for forked JMeter JVM: [java, -Xms1024M, -Xmx1024M, -Djava.awt.headless=true, -jar, ApacheJMeter-5.5.jar, -d, /home/smckinn/GIT/fortressDev/directory-fortress-core/target/dceff4c0-ff24-4e9c-ad4a-7db38b276b52/jmeter, -j, /home/smckinn/GIT/fortressDev/directory-fortress-core/target/jmeter/logs/AddUser.jmx.log, -l, /home/smckinn/GIT/fortressDev/directory-fortress-core/target/jmeter/results/20230702-AddUser.csv, -n, -t, /home/smckinn/GIT/fortressDev/directory-fortress-core/target/jmeter/testFiles/AddUser.jmx, -Dsun.net.http.allowRestrictedHeaders, true, -Dqualifier, A10, -Dversion, 3.0.0-SNAPSHOT]
[INFO]  
[INFO] Error in NonGUIDriver java.lang.NullPointerException
[INFO] An error occurred: Error in NonGUIDriver null
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time:  12.799 s
[INFO] Finished at: 2023-07-02T14:04:09-05:00
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal com.lazerycode.jmeter:jmeter-maven-plugin:3.7.0:jmeter (jmeter-tests) on project fortress-core: Test failed with exit code:1 -> [Help 1]
[ERROR] 
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR] 
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoExecutionException
[INFO] Shutdown detected, destroying JMeter process...
iii. jmeter tests hang

Observation: When running tests that consume lots of memory, e.g. using many threads and/or enabling REST, the process hangs. Jmeter and log4j logs stop outputing. The machine's otherwise unaffected. LDAP and/or HTTP servers are responsive. Root Cause: Most likely jmeter has run out of memory.
An error is not reported. The process hangs and stops responding.

Remedy: Edit the project's pom.mxl. Goto the loadtest profile. Increase the memory allocation, e.g. 2048 (2GB):

<profile>
   <id>loadtest</id>
   <build>
    ...
      <jMeterProcessJVMSettings>
         <xms>2048</xms>
         <xmx>2048</xmx>
      </jMeterProcessJVMSettings>
    ...
   </build>
</profile>
iv. too many open files

Observation: When running loadtests thought the REST interface, Exceptions in log file:

target/[GUID]/jmeter/bin/fortress-jmeter.log
2023-07-05 01:59:015 WARN  UserBase:219 - ThreadId: 23, error running test: org.apache.directory.fortress.core.RestException: post uri=[https://fortress-a:8443/fortress-rest-3.0.0-SNAPSHOT/], function=[rbacCheck], caught IOException=Too many open files
2023-07-05 01:59:015 ERROR RestUtils:389 - post uri=[https://fortress-a:8443/fortress-rest-3.0.0-SNAPSHOT/], function=[rbacCheck], caught IOException=Too many open files
java.net.SocketException: Too many open files

Remedy: Increase the maximum open files for ALL users. Requires a reboot to become active.

/etc/security/limits.conf
'*               -       nofile             8192'

END OF README