diff --git a/charts/acmecertmanagerio-challenge-editor/Chart.yaml b/charts/acmecertmanagerio-challenge-editor/Chart.yaml index 15b220f249..023d4891a7 100644 --- a/charts/acmecertmanagerio-challenge-editor/Chart.yaml +++ b/charts/acmecertmanagerio-challenge-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"acme.cert-manager.io","version":"v1","resource":"challenges"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Challenge Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: acmecertmanagerio-challenge-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/acmecertmanagerio-challenge-editor/README.md b/charts/acmecertmanagerio-challenge-editor/README.md index 5ceac1baf7..f40ade76ff 100644 --- a/charts/acmecertmanagerio-challenge-editor/README.md +++ b/charts/acmecertmanagerio-challenge-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/acmecertmanagerio-challenge-editor --version=v0.23.0 -$ helm upgrade -i acmecertmanagerio-challenge-editor appscode/acmecertmanagerio-challenge-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/acmecertmanagerio-challenge-editor --version=v0.24.0 +$ helm upgrade -i acmecertmanagerio-challenge-editor appscode/acmecertmanagerio-challenge-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Challenge Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `acmecertmanagerio-challenge-editor`: ```bash -$ helm upgrade -i acmecertmanagerio-challenge-editor appscode/acmecertmanagerio-challenge-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i acmecertmanagerio-challenge-editor appscode/acmecertmanagerio-challenge-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Challenge Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `acmecertmanagerio- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i acmecertmanagerio-challenge-editor appscode/acmecertmanagerio-challenge-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=acme.cert-manager.io/v1 +$ helm upgrade -i acmecertmanagerio-challenge-editor appscode/acmecertmanagerio-challenge-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=acme.cert-manager.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i acmecertmanagerio-challenge-editor appscode/acmecertmanagerio-challenge-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i acmecertmanagerio-challenge-editor appscode/acmecertmanagerio-challenge-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/acmecertmanagerio-order-editor/Chart.yaml b/charts/acmecertmanagerio-order-editor/Chart.yaml index 6054ec9f5a..ea5ef47833 100644 --- a/charts/acmecertmanagerio-order-editor/Chart.yaml +++ b/charts/acmecertmanagerio-order-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"acme.cert-manager.io","version":"v1","resource":"orders"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Order Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: acmecertmanagerio-order-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/acmecertmanagerio-order-editor/README.md b/charts/acmecertmanagerio-order-editor/README.md index 18c612caeb..0a612fc1f6 100644 --- a/charts/acmecertmanagerio-order-editor/README.md +++ b/charts/acmecertmanagerio-order-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/acmecertmanagerio-order-editor --version=v0.23.0 -$ helm upgrade -i acmecertmanagerio-order-editor appscode/acmecertmanagerio-order-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/acmecertmanagerio-order-editor --version=v0.24.0 +$ helm upgrade -i acmecertmanagerio-order-editor appscode/acmecertmanagerio-order-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Order Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `acmecertmanagerio-order-editor`: ```bash -$ helm upgrade -i acmecertmanagerio-order-editor appscode/acmecertmanagerio-order-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i acmecertmanagerio-order-editor appscode/acmecertmanagerio-order-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Order Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `acmecertmanagerio- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i acmecertmanagerio-order-editor appscode/acmecertmanagerio-order-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=acme.cert-manager.io/v1 +$ helm upgrade -i acmecertmanagerio-order-editor appscode/acmecertmanagerio-order-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=acme.cert-manager.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i acmecertmanagerio-order-editor appscode/acmecertmanagerio-order-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i acmecertmanagerio-order-editor appscode/acmecertmanagerio-order-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/addonopenclustermanagementio-addondeploymentconfig-editor/Chart.yaml b/charts/addonopenclustermanagementio-addondeploymentconfig-editor/Chart.yaml index 29d444414c..8c0a00177e 100644 --- a/charts/addonopenclustermanagementio-addondeploymentconfig-editor/Chart.yaml +++ b/charts/addonopenclustermanagementio-addondeploymentconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"addon.open-cluster-management.io","version":"v1alpha1","resource":"addondeploymentconfigs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AddOnDeploymentConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: addonopenclustermanagementio-addondeploymentconfig-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/addonopenclustermanagementio-addondeploymentconfig-editor/README.md b/charts/addonopenclustermanagementio-addondeploymentconfig-editor/README.md index 5aa9baa96b..9140bfe2c5 100644 --- a/charts/addonopenclustermanagementio-addondeploymentconfig-editor/README.md +++ b/charts/addonopenclustermanagementio-addondeploymentconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/addonopenclustermanagementio-addondeploymentconfig-editor --version=v0.23.0 -$ helm upgrade -i addonopenclustermanagementio-addondeploymentconfig-editor appscode/addonopenclustermanagementio-addondeploymentconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/addonopenclustermanagementio-addondeploymentconfig-editor --version=v0.24.0 +$ helm upgrade -i addonopenclustermanagementio-addondeploymentconfig-editor appscode/addonopenclustermanagementio-addondeploymentconfig-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AddOnDeploymentConfig Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `addonopenclustermanagementio-addondeploymentconfig-editor`: ```bash -$ helm upgrade -i addonopenclustermanagementio-addondeploymentconfig-editor appscode/addonopenclustermanagementio-addondeploymentconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i addonopenclustermanagementio-addondeploymentconfig-editor appscode/addonopenclustermanagementio-addondeploymentconfig-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AddOnDeploymentConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `addonopenclusterma Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i addonopenclustermanagementio-addondeploymentconfig-editor appscode/addonopenclustermanagementio-addondeploymentconfig-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=addon.open-cluster-management.io/v1alpha1 +$ helm upgrade -i addonopenclustermanagementio-addondeploymentconfig-editor appscode/addonopenclustermanagementio-addondeploymentconfig-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=addon.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i addonopenclustermanagementio-addondeploymentconfig-editor appscode/addonopenclustermanagementio-addondeploymentconfig-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i addonopenclustermanagementio-addondeploymentconfig-editor appscode/addonopenclustermanagementio-addondeploymentconfig-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/addonopenclustermanagementio-addontemplate-editor/Chart.yaml b/charts/addonopenclustermanagementio-addontemplate-editor/Chart.yaml index 70f1893f2f..4d2d3c53f0 100644 --- a/charts/addonopenclustermanagementio-addontemplate-editor/Chart.yaml +++ b/charts/addonopenclustermanagementio-addontemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"addon.open-cluster-management.io","version":"v1alpha1","resource":"addontemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AddOnTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: addonopenclustermanagementio-addontemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/addonopenclustermanagementio-addontemplate-editor/README.md b/charts/addonopenclustermanagementio-addontemplate-editor/README.md index 85cc7ebfcb..7c7daee7b2 100644 --- a/charts/addonopenclustermanagementio-addontemplate-editor/README.md +++ b/charts/addonopenclustermanagementio-addontemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/addonopenclustermanagementio-addontemplate-editor --version=v0.23.0 -$ helm upgrade -i addonopenclustermanagementio-addontemplate-editor appscode/addonopenclustermanagementio-addontemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/addonopenclustermanagementio-addontemplate-editor --version=v0.24.0 +$ helm upgrade -i addonopenclustermanagementio-addontemplate-editor appscode/addonopenclustermanagementio-addontemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AddOnTemplate Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `addonopenclustermanagementio-addontemplate-editor`: ```bash -$ helm upgrade -i addonopenclustermanagementio-addontemplate-editor appscode/addonopenclustermanagementio-addontemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i addonopenclustermanagementio-addontemplate-editor appscode/addonopenclustermanagementio-addontemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AddOnTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `addonopenclusterma Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i addonopenclustermanagementio-addontemplate-editor appscode/addonopenclustermanagementio-addontemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=addon.open-cluster-management.io/v1alpha1 +$ helm upgrade -i addonopenclustermanagementio-addontemplate-editor appscode/addonopenclustermanagementio-addontemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=addon.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i addonopenclustermanagementio-addontemplate-editor appscode/addonopenclustermanagementio-addontemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i addonopenclustermanagementio-addontemplate-editor appscode/addonopenclustermanagementio-addontemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/addonopenclustermanagementio-clustermanagementaddon-editor/Chart.yaml b/charts/addonopenclustermanagementio-clustermanagementaddon-editor/Chart.yaml index 9238f863bc..fd7c073e18 100644 --- a/charts/addonopenclustermanagementio-clustermanagementaddon-editor/Chart.yaml +++ b/charts/addonopenclustermanagementio-clustermanagementaddon-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"addon.open-cluster-management.io","version":"v1alpha1","resource":"clustermanagementaddons"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterManagementAddOn Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: addonopenclustermanagementio-clustermanagementaddon-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/addonopenclustermanagementio-clustermanagementaddon-editor/README.md b/charts/addonopenclustermanagementio-clustermanagementaddon-editor/README.md index 0094ac52b3..8f8ab8798b 100644 --- a/charts/addonopenclustermanagementio-clustermanagementaddon-editor/README.md +++ b/charts/addonopenclustermanagementio-clustermanagementaddon-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/addonopenclustermanagementio-clustermanagementaddon-editor --version=v0.23.0 -$ helm upgrade -i addonopenclustermanagementio-clustermanagementaddon-editor appscode/addonopenclustermanagementio-clustermanagementaddon-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/addonopenclustermanagementio-clustermanagementaddon-editor --version=v0.24.0 +$ helm upgrade -i addonopenclustermanagementio-clustermanagementaddon-editor appscode/addonopenclustermanagementio-clustermanagementaddon-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterManagementAddOn Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `addonopenclustermanagementio-clustermanagementaddon-editor`: ```bash -$ helm upgrade -i addonopenclustermanagementio-clustermanagementaddon-editor appscode/addonopenclustermanagementio-clustermanagementaddon-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i addonopenclustermanagementio-clustermanagementaddon-editor appscode/addonopenclustermanagementio-clustermanagementaddon-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterManagementAddOn Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `addonopenclusterma Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i addonopenclustermanagementio-clustermanagementaddon-editor appscode/addonopenclustermanagementio-clustermanagementaddon-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=addon.open-cluster-management.io/v1alpha1 +$ helm upgrade -i addonopenclustermanagementio-clustermanagementaddon-editor appscode/addonopenclustermanagementio-clustermanagementaddon-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=addon.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i addonopenclustermanagementio-clustermanagementaddon-editor appscode/addonopenclustermanagementio-clustermanagementaddon-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i addonopenclustermanagementio-clustermanagementaddon-editor appscode/addonopenclustermanagementio-clustermanagementaddon-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/addonopenclustermanagementio-managedclusteraddon-editor/Chart.yaml b/charts/addonopenclustermanagementio-managedclusteraddon-editor/Chart.yaml index 336a57ac0d..2673f58038 100644 --- a/charts/addonopenclustermanagementio-managedclusteraddon-editor/Chart.yaml +++ b/charts/addonopenclustermanagementio-managedclusteraddon-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"addon.open-cluster-management.io","version":"v1alpha1","resource":"managedclusteraddons"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ManagedClusterAddOn Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: addonopenclustermanagementio-managedclusteraddon-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/addonopenclustermanagementio-managedclusteraddon-editor/README.md b/charts/addonopenclustermanagementio-managedclusteraddon-editor/README.md index 422defe26e..586278451d 100644 --- a/charts/addonopenclustermanagementio-managedclusteraddon-editor/README.md +++ b/charts/addonopenclustermanagementio-managedclusteraddon-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/addonopenclustermanagementio-managedclusteraddon-editor --version=v0.23.0 -$ helm upgrade -i addonopenclustermanagementio-managedclusteraddon-editor appscode/addonopenclustermanagementio-managedclusteraddon-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/addonopenclustermanagementio-managedclusteraddon-editor --version=v0.24.0 +$ helm upgrade -i addonopenclustermanagementio-managedclusteraddon-editor appscode/addonopenclustermanagementio-managedclusteraddon-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedClusterAddOn Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `addonopenclustermanagementio-managedclusteraddon-editor`: ```bash -$ helm upgrade -i addonopenclustermanagementio-managedclusteraddon-editor appscode/addonopenclustermanagementio-managedclusteraddon-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i addonopenclustermanagementio-managedclusteraddon-editor appscode/addonopenclustermanagementio-managedclusteraddon-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ManagedClusterAddOn Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `addonopenclusterma Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i addonopenclustermanagementio-managedclusteraddon-editor appscode/addonopenclustermanagementio-managedclusteraddon-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=addon.open-cluster-management.io/v1alpha1 +$ helm upgrade -i addonopenclustermanagementio-managedclusteraddon-editor appscode/addonopenclustermanagementio-managedclusteraddon-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=addon.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i addonopenclustermanagementio-managedclusteraddon-editor appscode/addonopenclustermanagementio-managedclusteraddon-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i addonopenclustermanagementio-managedclusteraddon-editor appscode/addonopenclustermanagementio-managedclusteraddon-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/addonsclusterxk8sio-clusterresourceset-editor/Chart.yaml b/charts/addonsclusterxk8sio-clusterresourceset-editor/Chart.yaml index 27b3a01ccc..3e42f7d706 100644 --- a/charts/addonsclusterxk8sio-clusterresourceset-editor/Chart.yaml +++ b/charts/addonsclusterxk8sio-clusterresourceset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"addons.cluster.x-k8s.io","version":"v1beta1","resource":"clusterresourcesets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterResourceSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: addonsclusterxk8sio-clusterresourceset-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/addonsclusterxk8sio-clusterresourceset-editor/README.md b/charts/addonsclusterxk8sio-clusterresourceset-editor/README.md index 7a3ffb3a6a..2b179d68f1 100644 --- a/charts/addonsclusterxk8sio-clusterresourceset-editor/README.md +++ b/charts/addonsclusterxk8sio-clusterresourceset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/addonsclusterxk8sio-clusterresourceset-editor --version=v0.23.0 -$ helm upgrade -i addonsclusterxk8sio-clusterresourceset-editor appscode/addonsclusterxk8sio-clusterresourceset-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/addonsclusterxk8sio-clusterresourceset-editor --version=v0.24.0 +$ helm upgrade -i addonsclusterxk8sio-clusterresourceset-editor appscode/addonsclusterxk8sio-clusterresourceset-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterResourceSet Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `addonsclusterxk8sio-clusterresourceset-editor`: ```bash -$ helm upgrade -i addonsclusterxk8sio-clusterresourceset-editor appscode/addonsclusterxk8sio-clusterresourceset-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i addonsclusterxk8sio-clusterresourceset-editor appscode/addonsclusterxk8sio-clusterresourceset-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterResourceSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `addonsclusterxk8si Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i addonsclusterxk8sio-clusterresourceset-editor appscode/addonsclusterxk8sio-clusterresourceset-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=addons.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i addonsclusterxk8sio-clusterresourceset-editor appscode/addonsclusterxk8sio-clusterresourceset-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=addons.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i addonsclusterxk8sio-clusterresourceset-editor appscode/addonsclusterxk8sio-clusterresourceset-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i addonsclusterxk8sio-clusterresourceset-editor appscode/addonsclusterxk8sio-clusterresourceset-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/addonsclusterxk8sio-clusterresourcesetbinding-editor/Chart.yaml b/charts/addonsclusterxk8sio-clusterresourcesetbinding-editor/Chart.yaml index efc1d7ae2e..1fcd549a2a 100644 --- a/charts/addonsclusterxk8sio-clusterresourcesetbinding-editor/Chart.yaml +++ b/charts/addonsclusterxk8sio-clusterresourcesetbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"addons.cluster.x-k8s.io","version":"v1beta1","resource":"clusterresourcesetbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterResourceSetBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: addonsclusterxk8sio-clusterresourcesetbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/addonsclusterxk8sio-clusterresourcesetbinding-editor/README.md b/charts/addonsclusterxk8sio-clusterresourcesetbinding-editor/README.md index 8516f0b407..5fea937bd5 100644 --- a/charts/addonsclusterxk8sio-clusterresourcesetbinding-editor/README.md +++ b/charts/addonsclusterxk8sio-clusterresourcesetbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor --version=v0.23.0 -$ helm upgrade -i addonsclusterxk8sio-clusterresourcesetbinding-editor appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor --version=v0.24.0 +$ helm upgrade -i addonsclusterxk8sio-clusterresourcesetbinding-editor appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterResourceSetBinding Editor on a [Kubernetes](http://k To install/upgrade the chart with the release name `addonsclusterxk8sio-clusterresourcesetbinding-editor`: ```bash -$ helm upgrade -i addonsclusterxk8sio-clusterresourcesetbinding-editor appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i addonsclusterxk8sio-clusterresourcesetbinding-editor appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterResourceSetBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `addonsclusterxk8si Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i addonsclusterxk8sio-clusterresourcesetbinding-editor appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=addons.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i addonsclusterxk8sio-clusterresourcesetbinding-editor appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=addons.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i addonsclusterxk8sio-clusterresourcesetbinding-editor appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i addonsclusterxk8sio-clusterresourcesetbinding-editor appscode/addonsclusterxk8sio-clusterresourcesetbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/addonskubestashcom-addon-editor/Chart.yaml b/charts/addonskubestashcom-addon-editor/Chart.yaml index 52920efc28..d67260a1e4 100644 --- a/charts/addonskubestashcom-addon-editor/Chart.yaml +++ b/charts/addonskubestashcom-addon-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"addons.kubestash.com","version":"v1alpha1","resource":"addons"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Addon Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: addonskubestashcom-addon-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/addonskubestashcom-addon-editor/README.md b/charts/addonskubestashcom-addon-editor/README.md index 81afd4dccf..c30dfda631 100644 --- a/charts/addonskubestashcom-addon-editor/README.md +++ b/charts/addonskubestashcom-addon-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/addonskubestashcom-addon-editor --version=v0.23.0 -$ helm upgrade -i addonskubestashcom-addon-editor appscode/addonskubestashcom-addon-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/addonskubestashcom-addon-editor --version=v0.24.0 +$ helm upgrade -i addonskubestashcom-addon-editor appscode/addonskubestashcom-addon-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Addon Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `addonskubestashcom-addon-editor`: ```bash -$ helm upgrade -i addonskubestashcom-addon-editor appscode/addonskubestashcom-addon-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i addonskubestashcom-addon-editor appscode/addonskubestashcom-addon-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Addon Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `addonskubestashcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i addonskubestashcom-addon-editor appscode/addonskubestashcom-addon-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=addons.kubestash.com/v1alpha1 +$ helm upgrade -i addonskubestashcom-addon-editor appscode/addonskubestashcom-addon-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=addons.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i addonskubestashcom-addon-editor appscode/addonskubestashcom-addon-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i addonskubestashcom-addon-editor appscode/addonskubestashcom-addon-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/addonskubestashcom-function-editor/Chart.yaml b/charts/addonskubestashcom-function-editor/Chart.yaml index 33722dbb1c..958d328e89 100644 --- a/charts/addonskubestashcom-function-editor/Chart.yaml +++ b/charts/addonskubestashcom-function-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"addons.kubestash.com","version":"v1alpha1","resource":"functions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Function Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: addonskubestashcom-function-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/addonskubestashcom-function-editor/README.md b/charts/addonskubestashcom-function-editor/README.md index b21efd9219..3266c37215 100644 --- a/charts/addonskubestashcom-function-editor/README.md +++ b/charts/addonskubestashcom-function-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/addonskubestashcom-function-editor --version=v0.23.0 -$ helm upgrade -i addonskubestashcom-function-editor appscode/addonskubestashcom-function-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/addonskubestashcom-function-editor --version=v0.24.0 +$ helm upgrade -i addonskubestashcom-function-editor appscode/addonskubestashcom-function-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Function Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `addonskubestashcom-function-editor`: ```bash -$ helm upgrade -i addonskubestashcom-function-editor appscode/addonskubestashcom-function-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i addonskubestashcom-function-editor appscode/addonskubestashcom-function-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Function Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `addonskubestashcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i addonskubestashcom-function-editor appscode/addonskubestashcom-function-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=addons.kubestash.com/v1alpha1 +$ helm upgrade -i addonskubestashcom-function-editor appscode/addonskubestashcom-function-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=addons.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i addonskubestashcom-function-editor appscode/addonskubestashcom-function-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i addonskubestashcom-function-editor appscode/addonskubestashcom-function-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/admissionregistrationk8sio-mutatingwebhookconfiguration-editor/Chart.yaml b/charts/admissionregistrationk8sio-mutatingwebhookconfiguration-editor/Chart.yaml index 4ff027b887..995e7313b5 100644 --- a/charts/admissionregistrationk8sio-mutatingwebhookconfiguration-editor/Chart.yaml +++ b/charts/admissionregistrationk8sio-mutatingwebhookconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"admissionregistration.k8s.io","version":"v1","resource":"mutatingwebhookconfigurations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MutatingWebhookConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: admissionregistrationk8sio-mutatingwebhookconfiguration-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/admissionregistrationk8sio-mutatingwebhookconfiguration-editor/README.md b/charts/admissionregistrationk8sio-mutatingwebhookconfiguration-editor/README.md index 5f47aa1255..85d98c0fa0 100644 --- a/charts/admissionregistrationk8sio-mutatingwebhookconfiguration-editor/README.md +++ b/charts/admissionregistrationk8sio-mutatingwebhookconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor --version=v0.23.0 -$ helm upgrade -i admissionregistrationk8sio-mutatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor --version=v0.24.0 +$ helm upgrade -i admissionregistrationk8sio-mutatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MutatingWebhookConfiguration Editor on a [Kubernetes](http: To install/upgrade the chart with the release name `admissionregistrationk8sio-mutatingwebhookconfiguration-editor`: ```bash -$ helm upgrade -i admissionregistrationk8sio-mutatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i admissionregistrationk8sio-mutatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MutatingWebhookConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `admissionregistrat Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i admissionregistrationk8sio-mutatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=admissionregistration.k8s.io/v1 +$ helm upgrade -i admissionregistrationk8sio-mutatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=admissionregistration.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i admissionregistrationk8sio-mutatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i admissionregistrationk8sio-mutatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-mutatingwebhookconfiguration-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/admissionregistrationk8sio-validatingwebhookconfiguration-editor/Chart.yaml b/charts/admissionregistrationk8sio-validatingwebhookconfiguration-editor/Chart.yaml index 7dac4f9ed5..e402f22f51 100644 --- a/charts/admissionregistrationk8sio-validatingwebhookconfiguration-editor/Chart.yaml +++ b/charts/admissionregistrationk8sio-validatingwebhookconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"admissionregistration.k8s.io","version":"v1","resource":"validatingwebhookconfigurations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ValidatingWebhookConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: admissionregistrationk8sio-validatingwebhookconfiguration-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/admissionregistrationk8sio-validatingwebhookconfiguration-editor/README.md b/charts/admissionregistrationk8sio-validatingwebhookconfiguration-editor/README.md index 8fc8a51c55..4e70cf8fe6 100644 --- a/charts/admissionregistrationk8sio-validatingwebhookconfiguration-editor/README.md +++ b/charts/admissionregistrationk8sio-validatingwebhookconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor --version=v0.23.0 -$ helm upgrade -i admissionregistrationk8sio-validatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor --version=v0.24.0 +$ helm upgrade -i admissionregistrationk8sio-validatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ValidatingWebhookConfiguration Editor on a [Kubernetes](htt To install/upgrade the chart with the release name `admissionregistrationk8sio-validatingwebhookconfiguration-editor`: ```bash -$ helm upgrade -i admissionregistrationk8sio-validatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i admissionregistrationk8sio-validatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ValidatingWebhookConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `admissionregistrat Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i admissionregistrationk8sio-validatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=admissionregistration.k8s.io/v1 +$ helm upgrade -i admissionregistrationk8sio-validatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=admissionregistration.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i admissionregistrationk8sio-validatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i admissionregistrationk8sio-validatingwebhookconfiguration-editor appscode/admissionregistrationk8sio-validatingwebhookconfiguration-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/apiextensionscrossplaneio-compositeresourcedefinition-editor/Chart.yaml b/charts/apiextensionscrossplaneio-compositeresourcedefinition-editor/Chart.yaml index 9a43591b9b..387448da8c 100644 --- a/charts/apiextensionscrossplaneio-compositeresourcedefinition-editor/Chart.yaml +++ b/charts/apiextensionscrossplaneio-compositeresourcedefinition-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apiextensions.crossplane.io","version":"v1","resource":"compositeresourcedefinitions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: CompositeResourceDefinition Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apiextensionscrossplaneio-compositeresourcedefinition-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/apiextensionscrossplaneio-compositeresourcedefinition-editor/README.md b/charts/apiextensionscrossplaneio-compositeresourcedefinition-editor/README.md index 1c5a0b294d..90754a8a01 100644 --- a/charts/apiextensionscrossplaneio-compositeresourcedefinition-editor/README.md +++ b/charts/apiextensionscrossplaneio-compositeresourcedefinition-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor --version=v0.23.0 -$ helm upgrade -i apiextensionscrossplaneio-compositeresourcedefinition-editor appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor --version=v0.24.0 +$ helm upgrade -i apiextensionscrossplaneio-compositeresourcedefinition-editor appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CompositeResourceDefinition Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `apiextensionscrossplaneio-compositeresourcedefinition-editor`: ```bash -$ helm upgrade -i apiextensionscrossplaneio-compositeresourcedefinition-editor appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i apiextensionscrossplaneio-compositeresourcedefinition-editor appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a CompositeResourceDefinition Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apiextensionscross Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apiextensionscrossplaneio-compositeresourcedefinition-editor appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=apiextensions.crossplane.io/v1 +$ helm upgrade -i apiextensionscrossplaneio-compositeresourcedefinition-editor appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=apiextensions.crossplane.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apiextensionscrossplaneio-compositeresourcedefinition-editor appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i apiextensionscrossplaneio-compositeresourcedefinition-editor appscode/apiextensionscrossplaneio-compositeresourcedefinition-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/apiextensionscrossplaneio-composition-editor/Chart.yaml b/charts/apiextensionscrossplaneio-composition-editor/Chart.yaml index b121b4ff6c..646f173a75 100644 --- a/charts/apiextensionscrossplaneio-composition-editor/Chart.yaml +++ b/charts/apiextensionscrossplaneio-composition-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apiextensions.crossplane.io","version":"v1","resource":"compositions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Composition Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apiextensionscrossplaneio-composition-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/apiextensionscrossplaneio-composition-editor/README.md b/charts/apiextensionscrossplaneio-composition-editor/README.md index 246d3cc5b9..8c1be003eb 100644 --- a/charts/apiextensionscrossplaneio-composition-editor/README.md +++ b/charts/apiextensionscrossplaneio-composition-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apiextensionscrossplaneio-composition-editor --version=v0.23.0 -$ helm upgrade -i apiextensionscrossplaneio-composition-editor appscode/apiextensionscrossplaneio-composition-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/apiextensionscrossplaneio-composition-editor --version=v0.24.0 +$ helm upgrade -i apiextensionscrossplaneio-composition-editor appscode/apiextensionscrossplaneio-composition-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Composition Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `apiextensionscrossplaneio-composition-editor`: ```bash -$ helm upgrade -i apiextensionscrossplaneio-composition-editor appscode/apiextensionscrossplaneio-composition-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i apiextensionscrossplaneio-composition-editor appscode/apiextensionscrossplaneio-composition-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Composition Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apiextensionscross Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apiextensionscrossplaneio-composition-editor appscode/apiextensionscrossplaneio-composition-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=apiextensions.crossplane.io/v1 +$ helm upgrade -i apiextensionscrossplaneio-composition-editor appscode/apiextensionscrossplaneio-composition-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=apiextensions.crossplane.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apiextensionscrossplaneio-composition-editor appscode/apiextensionscrossplaneio-composition-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i apiextensionscrossplaneio-composition-editor appscode/apiextensionscrossplaneio-composition-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/apiextensionscrossplaneio-compositionrevision-editor/Chart.yaml b/charts/apiextensionscrossplaneio-compositionrevision-editor/Chart.yaml index df542cc034..9a156b46c4 100644 --- a/charts/apiextensionscrossplaneio-compositionrevision-editor/Chart.yaml +++ b/charts/apiextensionscrossplaneio-compositionrevision-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apiextensions.crossplane.io","version":"v1","resource":"compositionrevisions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: CompositionRevision Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apiextensionscrossplaneio-compositionrevision-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/apiextensionscrossplaneio-compositionrevision-editor/README.md b/charts/apiextensionscrossplaneio-compositionrevision-editor/README.md index a166faaa59..541de2c53f 100644 --- a/charts/apiextensionscrossplaneio-compositionrevision-editor/README.md +++ b/charts/apiextensionscrossplaneio-compositionrevision-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apiextensionscrossplaneio-compositionrevision-editor --version=v0.23.0 -$ helm upgrade -i apiextensionscrossplaneio-compositionrevision-editor appscode/apiextensionscrossplaneio-compositionrevision-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/apiextensionscrossplaneio-compositionrevision-editor --version=v0.24.0 +$ helm upgrade -i apiextensionscrossplaneio-compositionrevision-editor appscode/apiextensionscrossplaneio-compositionrevision-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CompositionRevision Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `apiextensionscrossplaneio-compositionrevision-editor`: ```bash -$ helm upgrade -i apiextensionscrossplaneio-compositionrevision-editor appscode/apiextensionscrossplaneio-compositionrevision-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i apiextensionscrossplaneio-compositionrevision-editor appscode/apiextensionscrossplaneio-compositionrevision-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a CompositionRevision Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apiextensionscross Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apiextensionscrossplaneio-compositionrevision-editor appscode/apiextensionscrossplaneio-compositionrevision-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=apiextensions.crossplane.io/v1 +$ helm upgrade -i apiextensionscrossplaneio-compositionrevision-editor appscode/apiextensionscrossplaneio-compositionrevision-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=apiextensions.crossplane.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apiextensionscrossplaneio-compositionrevision-editor appscode/apiextensionscrossplaneio-compositionrevision-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i apiextensionscrossplaneio-compositionrevision-editor appscode/apiextensionscrossplaneio-compositionrevision-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/apiextensionscrossplaneio-environmentconfig-editor/Chart.yaml b/charts/apiextensionscrossplaneio-environmentconfig-editor/Chart.yaml index 2bdbf40a05..9ae4366e90 100644 --- a/charts/apiextensionscrossplaneio-environmentconfig-editor/Chart.yaml +++ b/charts/apiextensionscrossplaneio-environmentconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apiextensions.crossplane.io","version":"v1alpha1","resource":"environmentconfigs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: EnvironmentConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apiextensionscrossplaneio-environmentconfig-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/apiextensionscrossplaneio-environmentconfig-editor/README.md b/charts/apiextensionscrossplaneio-environmentconfig-editor/README.md index 3635d2a96a..74e33458b0 100644 --- a/charts/apiextensionscrossplaneio-environmentconfig-editor/README.md +++ b/charts/apiextensionscrossplaneio-environmentconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apiextensionscrossplaneio-environmentconfig-editor --version=v0.23.0 -$ helm upgrade -i apiextensionscrossplaneio-environmentconfig-editor appscode/apiextensionscrossplaneio-environmentconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/apiextensionscrossplaneio-environmentconfig-editor --version=v0.24.0 +$ helm upgrade -i apiextensionscrossplaneio-environmentconfig-editor appscode/apiextensionscrossplaneio-environmentconfig-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EnvironmentConfig Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `apiextensionscrossplaneio-environmentconfig-editor`: ```bash -$ helm upgrade -i apiextensionscrossplaneio-environmentconfig-editor appscode/apiextensionscrossplaneio-environmentconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i apiextensionscrossplaneio-environmentconfig-editor appscode/apiextensionscrossplaneio-environmentconfig-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a EnvironmentConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apiextensionscross Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apiextensionscrossplaneio-environmentconfig-editor appscode/apiextensionscrossplaneio-environmentconfig-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=apiextensions.crossplane.io/v1alpha1 +$ helm upgrade -i apiextensionscrossplaneio-environmentconfig-editor appscode/apiextensionscrossplaneio-environmentconfig-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=apiextensions.crossplane.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apiextensionscrossplaneio-environmentconfig-editor appscode/apiextensionscrossplaneio-environmentconfig-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i apiextensionscrossplaneio-environmentconfig-editor appscode/apiextensionscrossplaneio-environmentconfig-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/apiextensionsk8sio-customresourcedefinition-editor/Chart.yaml b/charts/apiextensionsk8sio-customresourcedefinition-editor/Chart.yaml index 469c7b29f5..a29749499c 100644 --- a/charts/apiextensionsk8sio-customresourcedefinition-editor/Chart.yaml +++ b/charts/apiextensionsk8sio-customresourcedefinition-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apiextensions.k8s.io","version":"v1","resource":"customresourcedefinitions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: CustomResourceDefinition Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apiextensionsk8sio-customresourcedefinition-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/apiextensionsk8sio-customresourcedefinition-editor/README.md b/charts/apiextensionsk8sio-customresourcedefinition-editor/README.md index 6103f64358..f1a497ccda 100644 --- a/charts/apiextensionsk8sio-customresourcedefinition-editor/README.md +++ b/charts/apiextensionsk8sio-customresourcedefinition-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apiextensionsk8sio-customresourcedefinition-editor --version=v0.23.0 -$ helm upgrade -i apiextensionsk8sio-customresourcedefinition-editor appscode/apiextensionsk8sio-customresourcedefinition-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/apiextensionsk8sio-customresourcedefinition-editor --version=v0.24.0 +$ helm upgrade -i apiextensionsk8sio-customresourcedefinition-editor appscode/apiextensionsk8sio-customresourcedefinition-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CustomResourceDefinition Editor on a [Kubernetes](http://ku To install/upgrade the chart with the release name `apiextensionsk8sio-customresourcedefinition-editor`: ```bash -$ helm upgrade -i apiextensionsk8sio-customresourcedefinition-editor appscode/apiextensionsk8sio-customresourcedefinition-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i apiextensionsk8sio-customresourcedefinition-editor appscode/apiextensionsk8sio-customresourcedefinition-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a CustomResourceDefinition Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apiextensionsk8sio Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apiextensionsk8sio-customresourcedefinition-editor appscode/apiextensionsk8sio-customresourcedefinition-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=apiextensions.k8s.io/v1 +$ helm upgrade -i apiextensionsk8sio-customresourcedefinition-editor appscode/apiextensionsk8sio-customresourcedefinition-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=apiextensions.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apiextensionsk8sio-customresourcedefinition-editor appscode/apiextensionsk8sio-customresourcedefinition-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i apiextensionsk8sio-customresourcedefinition-editor appscode/apiextensionsk8sio-customresourcedefinition-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/apiregistrationk8sio-apiservice-editor/Chart.yaml b/charts/apiregistrationk8sio-apiservice-editor/Chart.yaml index d7844a1ad8..cd5e32fcb2 100644 --- a/charts/apiregistrationk8sio-apiservice-editor/Chart.yaml +++ b/charts/apiregistrationk8sio-apiservice-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apiregistration.k8s.io","version":"v1","resource":"apiservices"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: APIService Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apiregistrationk8sio-apiservice-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/apiregistrationk8sio-apiservice-editor/README.md b/charts/apiregistrationk8sio-apiservice-editor/README.md index 59f182e7e2..e501cec9b9 100644 --- a/charts/apiregistrationk8sio-apiservice-editor/README.md +++ b/charts/apiregistrationk8sio-apiservice-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apiregistrationk8sio-apiservice-editor --version=v0.23.0 -$ helm upgrade -i apiregistrationk8sio-apiservice-editor appscode/apiregistrationk8sio-apiservice-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/apiregistrationk8sio-apiservice-editor --version=v0.24.0 +$ helm upgrade -i apiregistrationk8sio-apiservice-editor appscode/apiregistrationk8sio-apiservice-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a APIService Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `apiregistrationk8sio-apiservice-editor`: ```bash -$ helm upgrade -i apiregistrationk8sio-apiservice-editor appscode/apiregistrationk8sio-apiservice-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i apiregistrationk8sio-apiservice-editor appscode/apiregistrationk8sio-apiservice-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a APIService Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apiregistrationk8s Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apiregistrationk8sio-apiservice-editor appscode/apiregistrationk8sio-apiservice-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=apiregistration.k8s.io/v1 +$ helm upgrade -i apiregistrationk8sio-apiservice-editor appscode/apiregistrationk8sio-apiservice-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=apiregistration.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apiregistrationk8sio-apiservice-editor appscode/apiregistrationk8sio-apiservice-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i apiregistrationk8sio-apiservice-editor appscode/apiregistrationk8sio-apiservice-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/appcatalogappscodecom-appbinding-editor/Chart.yaml b/charts/appcatalogappscodecom-appbinding-editor/Chart.yaml index 192bf433b1..d658f09706 100644 --- a/charts/appcatalogappscodecom-appbinding-editor/Chart.yaml +++ b/charts/appcatalogappscodecom-appbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"appcatalog.appscode.com","version":"v1alpha1","resource":"appbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AppBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: appcatalogappscodecom-appbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/appcatalogappscodecom-appbinding-editor/README.md b/charts/appcatalogappscodecom-appbinding-editor/README.md index e0e8195879..a89f5dedbf 100644 --- a/charts/appcatalogappscodecom-appbinding-editor/README.md +++ b/charts/appcatalogappscodecom-appbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/appcatalogappscodecom-appbinding-editor --version=v0.23.0 -$ helm upgrade -i appcatalogappscodecom-appbinding-editor appscode/appcatalogappscodecom-appbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/appcatalogappscodecom-appbinding-editor --version=v0.24.0 +$ helm upgrade -i appcatalogappscodecom-appbinding-editor appscode/appcatalogappscodecom-appbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AppBinding Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `appcatalogappscodecom-appbinding-editor`: ```bash -$ helm upgrade -i appcatalogappscodecom-appbinding-editor appscode/appcatalogappscodecom-appbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i appcatalogappscodecom-appbinding-editor appscode/appcatalogappscodecom-appbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AppBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `appcatalogappscode Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i appcatalogappscodecom-appbinding-editor appscode/appcatalogappscodecom-appbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=appcatalog.appscode.com/v1alpha1 +$ helm upgrade -i appcatalogappscodecom-appbinding-editor appscode/appcatalogappscodecom-appbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=appcatalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i appcatalogappscodecom-appbinding-editor appscode/appcatalogappscodecom-appbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i appcatalogappscodecom-appbinding-editor appscode/appcatalogappscodecom-appbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/appk8sio-application-editor/Chart.yaml b/charts/appk8sio-application-editor/Chart.yaml index 6c5e932bd5..da84ad6444 100644 --- a/charts/appk8sio-application-editor/Chart.yaml +++ b/charts/appk8sio-application-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"app.k8s.io","version":"v1beta1","resource":"applications"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Application Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: appk8sio-application-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/appk8sio-application-editor/README.md b/charts/appk8sio-application-editor/README.md index 1c02061f3a..4ab10919d8 100644 --- a/charts/appk8sio-application-editor/README.md +++ b/charts/appk8sio-application-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/appk8sio-application-editor --version=v0.23.0 -$ helm upgrade -i appk8sio-application-editor appscode/appk8sio-application-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/appk8sio-application-editor --version=v0.24.0 +$ helm upgrade -i appk8sio-application-editor appscode/appk8sio-application-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Application Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `appk8sio-application-editor`: ```bash -$ helm upgrade -i appk8sio-application-editor appscode/appk8sio-application-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i appk8sio-application-editor appscode/appk8sio-application-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Application Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `appk8sio-applicati Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i appk8sio-application-editor appscode/appk8sio-application-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=app.k8s.io/v1beta1 +$ helm upgrade -i appk8sio-application-editor appscode/appk8sio-application-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=app.k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i appk8sio-application-editor appscode/appk8sio-application-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i appk8sio-application-editor appscode/appk8sio-application-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/apps-controllerrevision-editor/Chart.yaml b/charts/apps-controllerrevision-editor/Chart.yaml index 0a1f68c419..3aa5ebcc58 100644 --- a/charts/apps-controllerrevision-editor/Chart.yaml +++ b/charts/apps-controllerrevision-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apps","version":"v1","resource":"controllerrevisions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ControllerRevision Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apps-controllerrevision-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/apps-controllerrevision-editor/README.md b/charts/apps-controllerrevision-editor/README.md index 0d6a28648d..c1d81b8d43 100644 --- a/charts/apps-controllerrevision-editor/README.md +++ b/charts/apps-controllerrevision-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apps-controllerrevision-editor --version=v0.23.0 -$ helm upgrade -i apps-controllerrevision-editor appscode/apps-controllerrevision-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/apps-controllerrevision-editor --version=v0.24.0 +$ helm upgrade -i apps-controllerrevision-editor appscode/apps-controllerrevision-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ControllerRevision Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `apps-controllerrevision-editor`: ```bash -$ helm upgrade -i apps-controllerrevision-editor appscode/apps-controllerrevision-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i apps-controllerrevision-editor appscode/apps-controllerrevision-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ControllerRevision Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apps-controllerrev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apps-controllerrevision-editor appscode/apps-controllerrevision-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=apps/v1 +$ helm upgrade -i apps-controllerrevision-editor appscode/apps-controllerrevision-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=apps/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apps-controllerrevision-editor appscode/apps-controllerrevision-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i apps-controllerrevision-editor appscode/apps-controllerrevision-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/apps-daemonset-editor/Chart.yaml b/charts/apps-daemonset-editor/Chart.yaml index ee5df7f690..b58a274bf8 100644 --- a/charts/apps-daemonset-editor/Chart.yaml +++ b/charts/apps-daemonset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apps","version":"v1","resource":"daemonsets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: DaemonSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apps-daemonset-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/apps-daemonset-editor/README.md b/charts/apps-daemonset-editor/README.md index d1385e2589..30ded3caa5 100644 --- a/charts/apps-daemonset-editor/README.md +++ b/charts/apps-daemonset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apps-daemonset-editor --version=v0.23.0 -$ helm upgrade -i apps-daemonset-editor appscode/apps-daemonset-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/apps-daemonset-editor --version=v0.24.0 +$ helm upgrade -i apps-daemonset-editor appscode/apps-daemonset-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DaemonSet Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `apps-daemonset-editor`: ```bash -$ helm upgrade -i apps-daemonset-editor appscode/apps-daemonset-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i apps-daemonset-editor appscode/apps-daemonset-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a DaemonSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apps-daemonset-edi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apps-daemonset-editor appscode/apps-daemonset-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=apps/v1 +$ helm upgrade -i apps-daemonset-editor appscode/apps-daemonset-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=apps/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apps-daemonset-editor appscode/apps-daemonset-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i apps-daemonset-editor appscode/apps-daemonset-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/apps-deployment-editor/Chart.yaml b/charts/apps-deployment-editor/Chart.yaml index 6a63ca8748..287cd9528b 100644 --- a/charts/apps-deployment-editor/Chart.yaml +++ b/charts/apps-deployment-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apps","version":"v1","resource":"deployments"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Deployment Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apps-deployment-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/apps-deployment-editor/README.md b/charts/apps-deployment-editor/README.md index d012db0820..5ccc439749 100644 --- a/charts/apps-deployment-editor/README.md +++ b/charts/apps-deployment-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apps-deployment-editor --version=v0.23.0 -$ helm upgrade -i apps-deployment-editor appscode/apps-deployment-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/apps-deployment-editor --version=v0.24.0 +$ helm upgrade -i apps-deployment-editor appscode/apps-deployment-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Deployment Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `apps-deployment-editor`: ```bash -$ helm upgrade -i apps-deployment-editor appscode/apps-deployment-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i apps-deployment-editor appscode/apps-deployment-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Deployment Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apps-deployment-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apps-deployment-editor appscode/apps-deployment-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=apps/v1 +$ helm upgrade -i apps-deployment-editor appscode/apps-deployment-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=apps/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apps-deployment-editor appscode/apps-deployment-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i apps-deployment-editor appscode/apps-deployment-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/apps-replicaset-editor/Chart.yaml b/charts/apps-replicaset-editor/Chart.yaml index e7d8ef6524..a94da3eedf 100644 --- a/charts/apps-replicaset-editor/Chart.yaml +++ b/charts/apps-replicaset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apps","version":"v1","resource":"replicasets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ReplicaSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apps-replicaset-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/apps-replicaset-editor/README.md b/charts/apps-replicaset-editor/README.md index 88924ca859..5342a375fb 100644 --- a/charts/apps-replicaset-editor/README.md +++ b/charts/apps-replicaset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apps-replicaset-editor --version=v0.23.0 -$ helm upgrade -i apps-replicaset-editor appscode/apps-replicaset-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/apps-replicaset-editor --version=v0.24.0 +$ helm upgrade -i apps-replicaset-editor appscode/apps-replicaset-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ReplicaSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `apps-replicaset-editor`: ```bash -$ helm upgrade -i apps-replicaset-editor appscode/apps-replicaset-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i apps-replicaset-editor appscode/apps-replicaset-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ReplicaSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apps-replicaset-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apps-replicaset-editor appscode/apps-replicaset-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=apps/v1 +$ helm upgrade -i apps-replicaset-editor appscode/apps-replicaset-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=apps/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apps-replicaset-editor appscode/apps-replicaset-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i apps-replicaset-editor appscode/apps-replicaset-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/apps-statefulset-editor/Chart.yaml b/charts/apps-statefulset-editor/Chart.yaml index 8213ba726c..f4a1671b27 100644 --- a/charts/apps-statefulset-editor/Chart.yaml +++ b/charts/apps-statefulset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apps","version":"v1","resource":"statefulsets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: StatefulSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: apps-statefulset-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/apps-statefulset-editor/README.md b/charts/apps-statefulset-editor/README.md index 91c051ac50..912f58cd46 100644 --- a/charts/apps-statefulset-editor/README.md +++ b/charts/apps-statefulset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/apps-statefulset-editor --version=v0.23.0 -$ helm upgrade -i apps-statefulset-editor appscode/apps-statefulset-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/apps-statefulset-editor --version=v0.24.0 +$ helm upgrade -i apps-statefulset-editor appscode/apps-statefulset-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a StatefulSet Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `apps-statefulset-editor`: ```bash -$ helm upgrade -i apps-statefulset-editor appscode/apps-statefulset-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i apps-statefulset-editor appscode/apps-statefulset-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a StatefulSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `apps-statefulset-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i apps-statefulset-editor appscode/apps-statefulset-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=apps/v1 +$ helm upgrade -i apps-statefulset-editor appscode/apps-statefulset-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=apps/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i apps-statefulset-editor appscode/apps-statefulset-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i apps-statefulset-editor appscode/apps-statefulset-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/appsk8sappscodecom-petset-editor/Chart.yaml b/charts/appsk8sappscodecom-petset-editor/Chart.yaml index 719dc57dd7..845cf6571a 100644 --- a/charts/appsk8sappscodecom-petset-editor/Chart.yaml +++ b/charts/appsk8sappscodecom-petset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apps.k8s.appscode.com","version":"v1","resource":"petsets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PetSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: appsk8sappscodecom-petset-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/appsk8sappscodecom-petset-editor/README.md b/charts/appsk8sappscodecom-petset-editor/README.md index cd6b3ee16d..c5fe1606a2 100644 --- a/charts/appsk8sappscodecom-petset-editor/README.md +++ b/charts/appsk8sappscodecom-petset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/appsk8sappscodecom-petset-editor --version=v0.23.0 -$ helm upgrade -i appsk8sappscodecom-petset-editor appscode/appsk8sappscodecom-petset-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/appsk8sappscodecom-petset-editor --version=v0.24.0 +$ helm upgrade -i appsk8sappscodecom-petset-editor appscode/appsk8sappscodecom-petset-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PetSet Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `appsk8sappscodecom-petset-editor`: ```bash -$ helm upgrade -i appsk8sappscodecom-petset-editor appscode/appsk8sappscodecom-petset-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i appsk8sappscodecom-petset-editor appscode/appsk8sappscodecom-petset-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PetSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `appsk8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i appsk8sappscodecom-petset-editor appscode/appsk8sappscodecom-petset-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=apps.k8s.appscode.com/v1 +$ helm upgrade -i appsk8sappscodecom-petset-editor appscode/appsk8sappscodecom-petset-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=apps.k8s.appscode.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i appsk8sappscodecom-petset-editor appscode/appsk8sappscodecom-petset-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i appsk8sappscodecom-petset-editor appscode/appsk8sappscodecom-petset-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/appsk8sappscodecom-placementpolicy-editor/Chart.yaml b/charts/appsk8sappscodecom-placementpolicy-editor/Chart.yaml index 5aa26fc17d..55de96f76f 100644 --- a/charts/appsk8sappscodecom-placementpolicy-editor/Chart.yaml +++ b/charts/appsk8sappscodecom-placementpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"apps.k8s.appscode.com","version":"v1","resource":"placementpolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PlacementPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: appsk8sappscodecom-placementpolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/appsk8sappscodecom-placementpolicy-editor/README.md b/charts/appsk8sappscodecom-placementpolicy-editor/README.md index 42f2d4f99b..c795dfad68 100644 --- a/charts/appsk8sappscodecom-placementpolicy-editor/README.md +++ b/charts/appsk8sappscodecom-placementpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/appsk8sappscodecom-placementpolicy-editor --version=v0.23.0 -$ helm upgrade -i appsk8sappscodecom-placementpolicy-editor appscode/appsk8sappscodecom-placementpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/appsk8sappscodecom-placementpolicy-editor --version=v0.24.0 +$ helm upgrade -i appsk8sappscodecom-placementpolicy-editor appscode/appsk8sappscodecom-placementpolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PlacementPolicy Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `appsk8sappscodecom-placementpolicy-editor`: ```bash -$ helm upgrade -i appsk8sappscodecom-placementpolicy-editor appscode/appsk8sappscodecom-placementpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i appsk8sappscodecom-placementpolicy-editor appscode/appsk8sappscodecom-placementpolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PlacementPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `appsk8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i appsk8sappscodecom-placementpolicy-editor appscode/appsk8sappscodecom-placementpolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=apps.k8s.appscode.com/v1 +$ helm upgrade -i appsk8sappscodecom-placementpolicy-editor appscode/appsk8sappscodecom-placementpolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=apps.k8s.appscode.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i appsk8sappscodecom-placementpolicy-editor appscode/appsk8sappscodecom-placementpolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i appsk8sappscodecom-placementpolicy-editor appscode/appsk8sappscodecom-placementpolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/archiverkubedbcom-mariadbarchiver-editor/Chart.yaml b/charts/archiverkubedbcom-mariadbarchiver-editor/Chart.yaml index bf33eb6d75..89b1fbfa50 100644 --- a/charts/archiverkubedbcom-mariadbarchiver-editor/Chart.yaml +++ b/charts/archiverkubedbcom-mariadbarchiver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"archiver.kubedb.com","version":"v1alpha1","resource":"mariadbarchivers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MariaDBArchiver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: archiverkubedbcom-mariadbarchiver-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/archiverkubedbcom-mariadbarchiver-editor/README.md b/charts/archiverkubedbcom-mariadbarchiver-editor/README.md index a1c47c0fbe..8e9cc905b8 100644 --- a/charts/archiverkubedbcom-mariadbarchiver-editor/README.md +++ b/charts/archiverkubedbcom-mariadbarchiver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/archiverkubedbcom-mariadbarchiver-editor --version=v0.23.0 -$ helm upgrade -i archiverkubedbcom-mariadbarchiver-editor appscode/archiverkubedbcom-mariadbarchiver-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/archiverkubedbcom-mariadbarchiver-editor --version=v0.24.0 +$ helm upgrade -i archiverkubedbcom-mariadbarchiver-editor appscode/archiverkubedbcom-mariadbarchiver-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBArchiver Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `archiverkubedbcom-mariadbarchiver-editor`: ```bash -$ helm upgrade -i archiverkubedbcom-mariadbarchiver-editor appscode/archiverkubedbcom-mariadbarchiver-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i archiverkubedbcom-mariadbarchiver-editor appscode/archiverkubedbcom-mariadbarchiver-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MariaDBArchiver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `archiverkubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i archiverkubedbcom-mariadbarchiver-editor appscode/archiverkubedbcom-mariadbarchiver-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=archiver.kubedb.com/v1alpha1 +$ helm upgrade -i archiverkubedbcom-mariadbarchiver-editor appscode/archiverkubedbcom-mariadbarchiver-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=archiver.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i archiverkubedbcom-mariadbarchiver-editor appscode/archiverkubedbcom-mariadbarchiver-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i archiverkubedbcom-mariadbarchiver-editor appscode/archiverkubedbcom-mariadbarchiver-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/archiverkubedbcom-mongodbarchiver-editor/Chart.yaml b/charts/archiverkubedbcom-mongodbarchiver-editor/Chart.yaml index 669e2979ba..6aa25ee22d 100644 --- a/charts/archiverkubedbcom-mongodbarchiver-editor/Chart.yaml +++ b/charts/archiverkubedbcom-mongodbarchiver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"archiver.kubedb.com","version":"v1alpha1","resource":"mongodbarchivers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MongoDBArchiver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: archiverkubedbcom-mongodbarchiver-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/archiverkubedbcom-mongodbarchiver-editor/README.md b/charts/archiverkubedbcom-mongodbarchiver-editor/README.md index 56aa537603..3efc30fbef 100644 --- a/charts/archiverkubedbcom-mongodbarchiver-editor/README.md +++ b/charts/archiverkubedbcom-mongodbarchiver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/archiverkubedbcom-mongodbarchiver-editor --version=v0.23.0 -$ helm upgrade -i archiverkubedbcom-mongodbarchiver-editor appscode/archiverkubedbcom-mongodbarchiver-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/archiverkubedbcom-mongodbarchiver-editor --version=v0.24.0 +$ helm upgrade -i archiverkubedbcom-mongodbarchiver-editor appscode/archiverkubedbcom-mongodbarchiver-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBArchiver Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `archiverkubedbcom-mongodbarchiver-editor`: ```bash -$ helm upgrade -i archiverkubedbcom-mongodbarchiver-editor appscode/archiverkubedbcom-mongodbarchiver-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i archiverkubedbcom-mongodbarchiver-editor appscode/archiverkubedbcom-mongodbarchiver-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MongoDBArchiver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `archiverkubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i archiverkubedbcom-mongodbarchiver-editor appscode/archiverkubedbcom-mongodbarchiver-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=archiver.kubedb.com/v1alpha1 +$ helm upgrade -i archiverkubedbcom-mongodbarchiver-editor appscode/archiverkubedbcom-mongodbarchiver-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=archiver.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i archiverkubedbcom-mongodbarchiver-editor appscode/archiverkubedbcom-mongodbarchiver-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i archiverkubedbcom-mongodbarchiver-editor appscode/archiverkubedbcom-mongodbarchiver-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/archiverkubedbcom-mssqlserverarchiver-editor/Chart.yaml b/charts/archiverkubedbcom-mssqlserverarchiver-editor/Chart.yaml index 3d94254c4a..3de84615ef 100644 --- a/charts/archiverkubedbcom-mssqlserverarchiver-editor/Chart.yaml +++ b/charts/archiverkubedbcom-mssqlserverarchiver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"archiver.kubedb.com","version":"v1alpha1","resource":"mssqlserverarchivers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLServerArchiver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: archiverkubedbcom-mssqlserverarchiver-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/archiverkubedbcom-mssqlserverarchiver-editor/README.md b/charts/archiverkubedbcom-mssqlserverarchiver-editor/README.md index 74e521a551..364e392625 100644 --- a/charts/archiverkubedbcom-mssqlserverarchiver-editor/README.md +++ b/charts/archiverkubedbcom-mssqlserverarchiver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/archiverkubedbcom-mssqlserverarchiver-editor --version=v0.23.0 -$ helm upgrade -i archiverkubedbcom-mssqlserverarchiver-editor appscode/archiverkubedbcom-mssqlserverarchiver-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/archiverkubedbcom-mssqlserverarchiver-editor --version=v0.24.0 +$ helm upgrade -i archiverkubedbcom-mssqlserverarchiver-editor appscode/archiverkubedbcom-mssqlserverarchiver-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerArchiver Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `archiverkubedbcom-mssqlserverarchiver-editor`: ```bash -$ helm upgrade -i archiverkubedbcom-mssqlserverarchiver-editor appscode/archiverkubedbcom-mssqlserverarchiver-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i archiverkubedbcom-mssqlserverarchiver-editor appscode/archiverkubedbcom-mssqlserverarchiver-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLServerArchiver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `archiverkubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i archiverkubedbcom-mssqlserverarchiver-editor appscode/archiverkubedbcom-mssqlserverarchiver-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=archiver.kubedb.com/v1alpha1 +$ helm upgrade -i archiverkubedbcom-mssqlserverarchiver-editor appscode/archiverkubedbcom-mssqlserverarchiver-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=archiver.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i archiverkubedbcom-mssqlserverarchiver-editor appscode/archiverkubedbcom-mssqlserverarchiver-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i archiverkubedbcom-mssqlserverarchiver-editor appscode/archiverkubedbcom-mssqlserverarchiver-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/archiverkubedbcom-mysqlarchiver-editor/Chart.yaml b/charts/archiverkubedbcom-mysqlarchiver-editor/Chart.yaml index a35c8b051f..9f98a76b45 100644 --- a/charts/archiverkubedbcom-mysqlarchiver-editor/Chart.yaml +++ b/charts/archiverkubedbcom-mysqlarchiver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"archiver.kubedb.com","version":"v1alpha1","resource":"mysqlarchivers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MySQLArchiver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: archiverkubedbcom-mysqlarchiver-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/archiverkubedbcom-mysqlarchiver-editor/README.md b/charts/archiverkubedbcom-mysqlarchiver-editor/README.md index f50b4c803e..99ef6cd5fb 100644 --- a/charts/archiverkubedbcom-mysqlarchiver-editor/README.md +++ b/charts/archiverkubedbcom-mysqlarchiver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/archiverkubedbcom-mysqlarchiver-editor --version=v0.23.0 -$ helm upgrade -i archiverkubedbcom-mysqlarchiver-editor appscode/archiverkubedbcom-mysqlarchiver-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/archiverkubedbcom-mysqlarchiver-editor --version=v0.24.0 +$ helm upgrade -i archiverkubedbcom-mysqlarchiver-editor appscode/archiverkubedbcom-mysqlarchiver-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLArchiver Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `archiverkubedbcom-mysqlarchiver-editor`: ```bash -$ helm upgrade -i archiverkubedbcom-mysqlarchiver-editor appscode/archiverkubedbcom-mysqlarchiver-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i archiverkubedbcom-mysqlarchiver-editor appscode/archiverkubedbcom-mysqlarchiver-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MySQLArchiver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `archiverkubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i archiverkubedbcom-mysqlarchiver-editor appscode/archiverkubedbcom-mysqlarchiver-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=archiver.kubedb.com/v1alpha1 +$ helm upgrade -i archiverkubedbcom-mysqlarchiver-editor appscode/archiverkubedbcom-mysqlarchiver-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=archiver.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i archiverkubedbcom-mysqlarchiver-editor appscode/archiverkubedbcom-mysqlarchiver-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i archiverkubedbcom-mysqlarchiver-editor appscode/archiverkubedbcom-mysqlarchiver-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/archiverkubedbcom-postgresarchiver-editor/Chart.yaml b/charts/archiverkubedbcom-postgresarchiver-editor/Chart.yaml index 844dd9ff19..49d365283e 100644 --- a/charts/archiverkubedbcom-postgresarchiver-editor/Chart.yaml +++ b/charts/archiverkubedbcom-postgresarchiver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"archiver.kubedb.com","version":"v1alpha1","resource":"postgresarchivers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PostgresArchiver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: archiverkubedbcom-postgresarchiver-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/archiverkubedbcom-postgresarchiver-editor/README.md b/charts/archiverkubedbcom-postgresarchiver-editor/README.md index 9820b39a20..2754f56d3a 100644 --- a/charts/archiverkubedbcom-postgresarchiver-editor/README.md +++ b/charts/archiverkubedbcom-postgresarchiver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/archiverkubedbcom-postgresarchiver-editor --version=v0.23.0 -$ helm upgrade -i archiverkubedbcom-postgresarchiver-editor appscode/archiverkubedbcom-postgresarchiver-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/archiverkubedbcom-postgresarchiver-editor --version=v0.24.0 +$ helm upgrade -i archiverkubedbcom-postgresarchiver-editor appscode/archiverkubedbcom-postgresarchiver-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresArchiver Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `archiverkubedbcom-postgresarchiver-editor`: ```bash -$ helm upgrade -i archiverkubedbcom-postgresarchiver-editor appscode/archiverkubedbcom-postgresarchiver-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i archiverkubedbcom-postgresarchiver-editor appscode/archiverkubedbcom-postgresarchiver-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PostgresArchiver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `archiverkubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i archiverkubedbcom-postgresarchiver-editor appscode/archiverkubedbcom-postgresarchiver-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=archiver.kubedb.com/v1alpha1 +$ helm upgrade -i archiverkubedbcom-postgresarchiver-editor appscode/archiverkubedbcom-postgresarchiver-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=archiver.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i archiverkubedbcom-postgresarchiver-editor appscode/archiverkubedbcom-postgresarchiver-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i archiverkubedbcom-postgresarchiver-editor appscode/archiverkubedbcom-postgresarchiver-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/auditorappscodecom-siteinfo-editor/Chart.yaml b/charts/auditorappscodecom-siteinfo-editor/Chart.yaml index 5f921a6f4e..99866a4827 100644 --- a/charts/auditorappscodecom-siteinfo-editor/Chart.yaml +++ b/charts/auditorappscodecom-siteinfo-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"auditor.appscode.com","version":"v1alpha1","resource":"siteinfos"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SiteInfo Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: auditorappscodecom-siteinfo-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/auditorappscodecom-siteinfo-editor/README.md b/charts/auditorappscodecom-siteinfo-editor/README.md index fb791adc25..b7d87ab632 100644 --- a/charts/auditorappscodecom-siteinfo-editor/README.md +++ b/charts/auditorappscodecom-siteinfo-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/auditorappscodecom-siteinfo-editor --version=v0.23.0 -$ helm upgrade -i auditorappscodecom-siteinfo-editor appscode/auditorappscodecom-siteinfo-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/auditorappscodecom-siteinfo-editor --version=v0.24.0 +$ helm upgrade -i auditorappscodecom-siteinfo-editor appscode/auditorappscodecom-siteinfo-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SiteInfo Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `auditorappscodecom-siteinfo-editor`: ```bash -$ helm upgrade -i auditorappscodecom-siteinfo-editor appscode/auditorappscodecom-siteinfo-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i auditorappscodecom-siteinfo-editor appscode/auditorappscodecom-siteinfo-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SiteInfo Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `auditorappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i auditorappscodecom-siteinfo-editor appscode/auditorappscodecom-siteinfo-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=auditor.appscode.com/v1alpha1 +$ helm upgrade -i auditorappscodecom-siteinfo-editor appscode/auditorappscodecom-siteinfo-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=auditor.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i auditorappscodecom-siteinfo-editor appscode/auditorappscodecom-siteinfo-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i auditorappscodecom-siteinfo-editor appscode/auditorappscodecom-siteinfo-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/auditregistrationk8sio-auditsink-editor/Chart.yaml b/charts/auditregistrationk8sio-auditsink-editor/Chart.yaml index 13e707c1ec..8a72eff024 100644 --- a/charts/auditregistrationk8sio-auditsink-editor/Chart.yaml +++ b/charts/auditregistrationk8sio-auditsink-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"auditregistration.k8s.io","version":"v1alpha1","resource":"auditsinks"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AuditSink Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: auditregistrationk8sio-auditsink-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/auditregistrationk8sio-auditsink-editor/README.md b/charts/auditregistrationk8sio-auditsink-editor/README.md index 8bd34a22bf..d7fe6559b3 100644 --- a/charts/auditregistrationk8sio-auditsink-editor/README.md +++ b/charts/auditregistrationk8sio-auditsink-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/auditregistrationk8sio-auditsink-editor --version=v0.23.0 -$ helm upgrade -i auditregistrationk8sio-auditsink-editor appscode/auditregistrationk8sio-auditsink-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/auditregistrationk8sio-auditsink-editor --version=v0.24.0 +$ helm upgrade -i auditregistrationk8sio-auditsink-editor appscode/auditregistrationk8sio-auditsink-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AuditSink Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `auditregistrationk8sio-auditsink-editor`: ```bash -$ helm upgrade -i auditregistrationk8sio-auditsink-editor appscode/auditregistrationk8sio-auditsink-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i auditregistrationk8sio-auditsink-editor appscode/auditregistrationk8sio-auditsink-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AuditSink Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `auditregistrationk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i auditregistrationk8sio-auditsink-editor appscode/auditregistrationk8sio-auditsink-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=auditregistration.k8s.io/v1alpha1 +$ helm upgrade -i auditregistrationk8sio-auditsink-editor appscode/auditregistrationk8sio-auditsink-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=auditregistration.k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i auditregistrationk8sio-auditsink-editor appscode/auditregistrationk8sio-auditsink-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i auditregistrationk8sio-auditsink-editor appscode/auditregistrationk8sio-auditsink-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/authenticationk8sappscodecom-account-editor/Chart.yaml b/charts/authenticationk8sappscodecom-account-editor/Chart.yaml index af0cf42148..b2f7694a58 100644 --- a/charts/authenticationk8sappscodecom-account-editor/Chart.yaml +++ b/charts/authenticationk8sappscodecom-account-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authentication.k8s.appscode.com","version":"v1alpha1","resource":"accounts"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Account Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authenticationk8sappscodecom-account-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/authenticationk8sappscodecom-account-editor/README.md b/charts/authenticationk8sappscodecom-account-editor/README.md index 71b37033a9..6a517de5f2 100644 --- a/charts/authenticationk8sappscodecom-account-editor/README.md +++ b/charts/authenticationk8sappscodecom-account-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authenticationk8sappscodecom-account-editor --version=v0.23.0 -$ helm upgrade -i authenticationk8sappscodecom-account-editor appscode/authenticationk8sappscodecom-account-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/authenticationk8sappscodecom-account-editor --version=v0.24.0 +$ helm upgrade -i authenticationk8sappscodecom-account-editor appscode/authenticationk8sappscodecom-account-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Account Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `authenticationk8sappscodecom-account-editor`: ```bash -$ helm upgrade -i authenticationk8sappscodecom-account-editor appscode/authenticationk8sappscodecom-account-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i authenticationk8sappscodecom-account-editor appscode/authenticationk8sappscodecom-account-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Account Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authenticationk8sa Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authenticationk8sappscodecom-account-editor appscode/authenticationk8sappscodecom-account-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=authentication.k8s.appscode.com/v1alpha1 +$ helm upgrade -i authenticationk8sappscodecom-account-editor appscode/authenticationk8sappscodecom-account-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=authentication.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authenticationk8sappscodecom-account-editor appscode/authenticationk8sappscodecom-account-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i authenticationk8sappscodecom-account-editor appscode/authenticationk8sappscodecom-account-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/authenticationk8sappscodecom-user-editor/Chart.yaml b/charts/authenticationk8sappscodecom-user-editor/Chart.yaml index fb9fe4cbf7..d6a6d7bb29 100644 --- a/charts/authenticationk8sappscodecom-user-editor/Chart.yaml +++ b/charts/authenticationk8sappscodecom-user-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authentication.k8s.appscode.com","version":"v1alpha1","resource":"users"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: User Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authenticationk8sappscodecom-user-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/authenticationk8sappscodecom-user-editor/README.md b/charts/authenticationk8sappscodecom-user-editor/README.md index e156984e48..77712319ad 100644 --- a/charts/authenticationk8sappscodecom-user-editor/README.md +++ b/charts/authenticationk8sappscodecom-user-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authenticationk8sappscodecom-user-editor --version=v0.23.0 -$ helm upgrade -i authenticationk8sappscodecom-user-editor appscode/authenticationk8sappscodecom-user-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/authenticationk8sappscodecom-user-editor --version=v0.24.0 +$ helm upgrade -i authenticationk8sappscodecom-user-editor appscode/authenticationk8sappscodecom-user-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a User Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `authenticationk8sappscodecom-user-editor`: ```bash -$ helm upgrade -i authenticationk8sappscodecom-user-editor appscode/authenticationk8sappscodecom-user-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i authenticationk8sappscodecom-user-editor appscode/authenticationk8sappscodecom-user-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a User Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authenticationk8sa Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authenticationk8sappscodecom-user-editor appscode/authenticationk8sappscodecom-user-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=authentication.k8s.appscode.com/v1alpha1 +$ helm upgrade -i authenticationk8sappscodecom-user-editor appscode/authenticationk8sappscodecom-user-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=authentication.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authenticationk8sappscodecom-user-editor appscode/authenticationk8sappscodecom-user-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i authenticationk8sappscodecom-user-editor appscode/authenticationk8sappscodecom-user-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/authenticationk8sio-tokenrequest-editor/Chart.yaml b/charts/authenticationk8sio-tokenrequest-editor/Chart.yaml index f8ec139c8c..89e16f1908 100644 --- a/charts/authenticationk8sio-tokenrequest-editor/Chart.yaml +++ b/charts/authenticationk8sio-tokenrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authentication.k8s.io","version":"v1","resource":"tokenrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: TokenRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authenticationk8sio-tokenrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/authenticationk8sio-tokenrequest-editor/README.md b/charts/authenticationk8sio-tokenrequest-editor/README.md index c78177a8e9..cacdfad7a9 100644 --- a/charts/authenticationk8sio-tokenrequest-editor/README.md +++ b/charts/authenticationk8sio-tokenrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authenticationk8sio-tokenrequest-editor --version=v0.23.0 -$ helm upgrade -i authenticationk8sio-tokenrequest-editor appscode/authenticationk8sio-tokenrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/authenticationk8sio-tokenrequest-editor --version=v0.24.0 +$ helm upgrade -i authenticationk8sio-tokenrequest-editor appscode/authenticationk8sio-tokenrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a TokenRequest Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `authenticationk8sio-tokenrequest-editor`: ```bash -$ helm upgrade -i authenticationk8sio-tokenrequest-editor appscode/authenticationk8sio-tokenrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i authenticationk8sio-tokenrequest-editor appscode/authenticationk8sio-tokenrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a TokenRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authenticationk8si Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authenticationk8sio-tokenrequest-editor appscode/authenticationk8sio-tokenrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=authentication.k8s.io/v1 +$ helm upgrade -i authenticationk8sio-tokenrequest-editor appscode/authenticationk8sio-tokenrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=authentication.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authenticationk8sio-tokenrequest-editor appscode/authenticationk8sio-tokenrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i authenticationk8sio-tokenrequest-editor appscode/authenticationk8sio-tokenrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/authenticationk8sio-tokenreview-editor/Chart.yaml b/charts/authenticationk8sio-tokenreview-editor/Chart.yaml index 1bc1689ae9..bd7a7fb2bc 100644 --- a/charts/authenticationk8sio-tokenreview-editor/Chart.yaml +++ b/charts/authenticationk8sio-tokenreview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authentication.k8s.io","version":"v1","resource":"tokenreviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: TokenReview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authenticationk8sio-tokenreview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/authenticationk8sio-tokenreview-editor/README.md b/charts/authenticationk8sio-tokenreview-editor/README.md index 785fe5cd4a..073d5e3438 100644 --- a/charts/authenticationk8sio-tokenreview-editor/README.md +++ b/charts/authenticationk8sio-tokenreview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authenticationk8sio-tokenreview-editor --version=v0.23.0 -$ helm upgrade -i authenticationk8sio-tokenreview-editor appscode/authenticationk8sio-tokenreview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/authenticationk8sio-tokenreview-editor --version=v0.24.0 +$ helm upgrade -i authenticationk8sio-tokenreview-editor appscode/authenticationk8sio-tokenreview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a TokenReview Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `authenticationk8sio-tokenreview-editor`: ```bash -$ helm upgrade -i authenticationk8sio-tokenreview-editor appscode/authenticationk8sio-tokenreview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i authenticationk8sio-tokenreview-editor appscode/authenticationk8sio-tokenreview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a TokenReview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authenticationk8si Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authenticationk8sio-tokenreview-editor appscode/authenticationk8sio-tokenreview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=authentication.k8s.io/v1 +$ helm upgrade -i authenticationk8sio-tokenreview-editor appscode/authenticationk8sio-tokenreview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=authentication.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authenticationk8sio-tokenreview-editor appscode/authenticationk8sio-tokenreview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i authenticationk8sio-tokenreview-editor appscode/authenticationk8sio-tokenreview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/authenticationopenclustermanagementio-managedserviceaccount-editor/Chart.yaml b/charts/authenticationopenclustermanagementio-managedserviceaccount-editor/Chart.yaml index 2291107b6c..d1bedabeba 100644 --- a/charts/authenticationopenclustermanagementio-managedserviceaccount-editor/Chart.yaml +++ b/charts/authenticationopenclustermanagementio-managedserviceaccount-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authentication.open-cluster-management.io","version":"v1beta1","resource":"managedserviceaccounts"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ManagedServiceAccount Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authenticationopenclustermanagementio-managedserviceaccount-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/authenticationopenclustermanagementio-managedserviceaccount-editor/README.md b/charts/authenticationopenclustermanagementio-managedserviceaccount-editor/README.md index 856b753522..1958658475 100644 --- a/charts/authenticationopenclustermanagementio-managedserviceaccount-editor/README.md +++ b/charts/authenticationopenclustermanagementio-managedserviceaccount-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authenticationopenclustermanagementio-managedserviceaccount-editor --version=v0.23.0 -$ helm upgrade -i authenticationopenclustermanagementio-managedserviceaccount-editor appscode/authenticationopenclustermanagementio-managedserviceaccount-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/authenticationopenclustermanagementio-managedserviceaccount-editor --version=v0.24.0 +$ helm upgrade -i authenticationopenclustermanagementio-managedserviceaccount-editor appscode/authenticationopenclustermanagementio-managedserviceaccount-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedServiceAccount Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `authenticationopenclustermanagementio-managedserviceaccount-editor`: ```bash -$ helm upgrade -i authenticationopenclustermanagementio-managedserviceaccount-editor appscode/authenticationopenclustermanagementio-managedserviceaccount-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i authenticationopenclustermanagementio-managedserviceaccount-editor appscode/authenticationopenclustermanagementio-managedserviceaccount-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ManagedServiceAccount Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authenticationopen Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authenticationopenclustermanagementio-managedserviceaccount-editor appscode/authenticationopenclustermanagementio-managedserviceaccount-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=authentication.open-cluster-management.io/v1beta1 +$ helm upgrade -i authenticationopenclustermanagementio-managedserviceaccount-editor appscode/authenticationopenclustermanagementio-managedserviceaccount-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=authentication.open-cluster-management.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authenticationopenclustermanagementio-managedserviceaccount-editor appscode/authenticationopenclustermanagementio-managedserviceaccount-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i authenticationopenclustermanagementio-managedserviceaccount-editor appscode/authenticationopenclustermanagementio-managedserviceaccount-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/authorizationazurekubedbcom-roleassignment-editor/Chart.yaml b/charts/authorizationazurekubedbcom-roleassignment-editor/Chart.yaml index 7f0530e632..c7adf5252b 100644 --- a/charts/authorizationazurekubedbcom-roleassignment-editor/Chart.yaml +++ b/charts/authorizationazurekubedbcom-roleassignment-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authorization.azure.kubedb.com","version":"v1alpha1","resource":"roleassignments"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RoleAssignment Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authorizationazurekubedbcom-roleassignment-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/authorizationazurekubedbcom-roleassignment-editor/README.md b/charts/authorizationazurekubedbcom-roleassignment-editor/README.md index 619d06f0f4..cb22cef86b 100644 --- a/charts/authorizationazurekubedbcom-roleassignment-editor/README.md +++ b/charts/authorizationazurekubedbcom-roleassignment-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authorizationazurekubedbcom-roleassignment-editor --version=v0.23.0 -$ helm upgrade -i authorizationazurekubedbcom-roleassignment-editor appscode/authorizationazurekubedbcom-roleassignment-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/authorizationazurekubedbcom-roleassignment-editor --version=v0.24.0 +$ helm upgrade -i authorizationazurekubedbcom-roleassignment-editor appscode/authorizationazurekubedbcom-roleassignment-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RoleAssignment Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `authorizationazurekubedbcom-roleassignment-editor`: ```bash -$ helm upgrade -i authorizationazurekubedbcom-roleassignment-editor appscode/authorizationazurekubedbcom-roleassignment-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i authorizationazurekubedbcom-roleassignment-editor appscode/authorizationazurekubedbcom-roleassignment-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RoleAssignment Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authorizationazure Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authorizationazurekubedbcom-roleassignment-editor appscode/authorizationazurekubedbcom-roleassignment-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=authorization.azure.kubedb.com/v1alpha1 +$ helm upgrade -i authorizationazurekubedbcom-roleassignment-editor appscode/authorizationazurekubedbcom-roleassignment-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=authorization.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authorizationazurekubedbcom-roleassignment-editor appscode/authorizationazurekubedbcom-roleassignment-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i authorizationazurekubedbcom-roleassignment-editor appscode/authorizationazurekubedbcom-roleassignment-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/authorizationk8sappscodecom-managedclusterrole-editor/Chart.yaml b/charts/authorizationk8sappscodecom-managedclusterrole-editor/Chart.yaml index d37b783be6..e1e94936a5 100644 --- a/charts/authorizationk8sappscodecom-managedclusterrole-editor/Chart.yaml +++ b/charts/authorizationk8sappscodecom-managedclusterrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authorization.k8s.appscode.com","version":"v1alpha1","resource":"managedclusterroles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ManagedClusterRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authorizationk8sappscodecom-managedclusterrole-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/authorizationk8sappscodecom-managedclusterrole-editor/README.md b/charts/authorizationk8sappscodecom-managedclusterrole-editor/README.md index f1d6fb578d..97d095e69a 100644 --- a/charts/authorizationk8sappscodecom-managedclusterrole-editor/README.md +++ b/charts/authorizationk8sappscodecom-managedclusterrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authorizationk8sappscodecom-managedclusterrole-editor --version=v0.23.0 -$ helm upgrade -i authorizationk8sappscodecom-managedclusterrole-editor appscode/authorizationk8sappscodecom-managedclusterrole-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/authorizationk8sappscodecom-managedclusterrole-editor --version=v0.24.0 +$ helm upgrade -i authorizationk8sappscodecom-managedclusterrole-editor appscode/authorizationk8sappscodecom-managedclusterrole-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedClusterRole Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `authorizationk8sappscodecom-managedclusterrole-editor`: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclusterrole-editor appscode/authorizationk8sappscodecom-managedclusterrole-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i authorizationk8sappscodecom-managedclusterrole-editor appscode/authorizationk8sappscodecom-managedclusterrole-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ManagedClusterRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authorizationk8sap Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclusterrole-editor appscode/authorizationk8sappscodecom-managedclusterrole-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=authorization.k8s.appscode.com/v1alpha1 +$ helm upgrade -i authorizationk8sappscodecom-managedclusterrole-editor appscode/authorizationk8sappscodecom-managedclusterrole-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=authorization.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclusterrole-editor appscode/authorizationk8sappscodecom-managedclusterrole-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i authorizationk8sappscodecom-managedclusterrole-editor appscode/authorizationk8sappscodecom-managedclusterrole-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/authorizationk8sappscodecom-managedclusterrolebinding-editor/Chart.yaml b/charts/authorizationk8sappscodecom-managedclusterrolebinding-editor/Chart.yaml index 787a36f5ed..c94ac8d095 100644 --- a/charts/authorizationk8sappscodecom-managedclusterrolebinding-editor/Chart.yaml +++ b/charts/authorizationk8sappscodecom-managedclusterrolebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authorization.k8s.appscode.com","version":"v1alpha1","resource":"managedclusterrolebindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ManagedClusterRoleBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authorizationk8sappscodecom-managedclusterrolebinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/authorizationk8sappscodecom-managedclusterrolebinding-editor/README.md b/charts/authorizationk8sappscodecom-managedclusterrolebinding-editor/README.md index 811fac3510..fd5f1a06b5 100644 --- a/charts/authorizationk8sappscodecom-managedclusterrolebinding-editor/README.md +++ b/charts/authorizationk8sappscodecom-managedclusterrolebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor --version=v0.23.0 -$ helm upgrade -i authorizationk8sappscodecom-managedclusterrolebinding-editor appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor --version=v0.24.0 +$ helm upgrade -i authorizationk8sappscodecom-managedclusterrolebinding-editor appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedClusterRoleBinding Editor on a [Kubernetes](http://k To install/upgrade the chart with the release name `authorizationk8sappscodecom-managedclusterrolebinding-editor`: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclusterrolebinding-editor appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i authorizationk8sappscodecom-managedclusterrolebinding-editor appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ManagedClusterRoleBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authorizationk8sap Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclusterrolebinding-editor appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=authorization.k8s.appscode.com/v1alpha1 +$ helm upgrade -i authorizationk8sappscodecom-managedclusterrolebinding-editor appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=authorization.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclusterrolebinding-editor appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i authorizationk8sappscodecom-managedclusterrolebinding-editor appscode/authorizationk8sappscodecom-managedclusterrolebinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/authorizationk8sappscodecom-managedclustersetrolebinding-editor/Chart.yaml b/charts/authorizationk8sappscodecom-managedclustersetrolebinding-editor/Chart.yaml index 74143b0e9f..4b9a1a990b 100644 --- a/charts/authorizationk8sappscodecom-managedclustersetrolebinding-editor/Chart.yaml +++ b/charts/authorizationk8sappscodecom-managedclustersetrolebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authorization.k8s.appscode.com","version":"v1alpha1","resource":"managedclustersetrolebindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ManagedClusterSetRoleBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authorizationk8sappscodecom-managedclustersetrolebinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/authorizationk8sappscodecom-managedclustersetrolebinding-editor/README.md b/charts/authorizationk8sappscodecom-managedclustersetrolebinding-editor/README.md index 448dd4fa80..09eb30a188 100644 --- a/charts/authorizationk8sappscodecom-managedclustersetrolebinding-editor/README.md +++ b/charts/authorizationk8sappscodecom-managedclustersetrolebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor --version=v0.23.0 -$ helm upgrade -i authorizationk8sappscodecom-managedclustersetrolebinding-editor appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor --version=v0.24.0 +$ helm upgrade -i authorizationk8sappscodecom-managedclustersetrolebinding-editor appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedClusterSetRoleBinding Editor on a [Kubernetes](http: To install/upgrade the chart with the release name `authorizationk8sappscodecom-managedclustersetrolebinding-editor`: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclustersetrolebinding-editor appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i authorizationk8sappscodecom-managedclustersetrolebinding-editor appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ManagedClusterSetRoleBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authorizationk8sap Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclustersetrolebinding-editor appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=authorization.k8s.appscode.com/v1alpha1 +$ helm upgrade -i authorizationk8sappscodecom-managedclustersetrolebinding-editor appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=authorization.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authorizationk8sappscodecom-managedclustersetrolebinding-editor appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i authorizationk8sappscodecom-managedclustersetrolebinding-editor appscode/authorizationk8sappscodecom-managedclustersetrolebinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/authorizationk8sio-localsubjectaccessreview-editor/Chart.yaml b/charts/authorizationk8sio-localsubjectaccessreview-editor/Chart.yaml index 1374c3ea52..154f4c7c9d 100644 --- a/charts/authorizationk8sio-localsubjectaccessreview-editor/Chart.yaml +++ b/charts/authorizationk8sio-localsubjectaccessreview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authorization.k8s.io","version":"v1","resource":"localsubjectaccessreviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: LocalSubjectAccessReview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authorizationk8sio-localsubjectaccessreview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/authorizationk8sio-localsubjectaccessreview-editor/README.md b/charts/authorizationk8sio-localsubjectaccessreview-editor/README.md index 9b8c60d04b..0f0ebbfdb8 100644 --- a/charts/authorizationk8sio-localsubjectaccessreview-editor/README.md +++ b/charts/authorizationk8sio-localsubjectaccessreview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authorizationk8sio-localsubjectaccessreview-editor --version=v0.23.0 -$ helm upgrade -i authorizationk8sio-localsubjectaccessreview-editor appscode/authorizationk8sio-localsubjectaccessreview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/authorizationk8sio-localsubjectaccessreview-editor --version=v0.24.0 +$ helm upgrade -i authorizationk8sio-localsubjectaccessreview-editor appscode/authorizationk8sio-localsubjectaccessreview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a LocalSubjectAccessReview Editor on a [Kubernetes](http://ku To install/upgrade the chart with the release name `authorizationk8sio-localsubjectaccessreview-editor`: ```bash -$ helm upgrade -i authorizationk8sio-localsubjectaccessreview-editor appscode/authorizationk8sio-localsubjectaccessreview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i authorizationk8sio-localsubjectaccessreview-editor appscode/authorizationk8sio-localsubjectaccessreview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a LocalSubjectAccessReview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authorizationk8sio Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authorizationk8sio-localsubjectaccessreview-editor appscode/authorizationk8sio-localsubjectaccessreview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=authorization.k8s.io/v1 +$ helm upgrade -i authorizationk8sio-localsubjectaccessreview-editor appscode/authorizationk8sio-localsubjectaccessreview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=authorization.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authorizationk8sio-localsubjectaccessreview-editor appscode/authorizationk8sio-localsubjectaccessreview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i authorizationk8sio-localsubjectaccessreview-editor appscode/authorizationk8sio-localsubjectaccessreview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/authorizationk8sio-selfsubjectaccessreview-editor/Chart.yaml b/charts/authorizationk8sio-selfsubjectaccessreview-editor/Chart.yaml index 1e44cb4561..6166121a14 100644 --- a/charts/authorizationk8sio-selfsubjectaccessreview-editor/Chart.yaml +++ b/charts/authorizationk8sio-selfsubjectaccessreview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authorization.k8s.io","version":"v1","resource":"selfsubjectaccessreviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SelfSubjectAccessReview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authorizationk8sio-selfsubjectaccessreview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/authorizationk8sio-selfsubjectaccessreview-editor/README.md b/charts/authorizationk8sio-selfsubjectaccessreview-editor/README.md index d4514f7cda..de22a3aae4 100644 --- a/charts/authorizationk8sio-selfsubjectaccessreview-editor/README.md +++ b/charts/authorizationk8sio-selfsubjectaccessreview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authorizationk8sio-selfsubjectaccessreview-editor --version=v0.23.0 -$ helm upgrade -i authorizationk8sio-selfsubjectaccessreview-editor appscode/authorizationk8sio-selfsubjectaccessreview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/authorizationk8sio-selfsubjectaccessreview-editor --version=v0.24.0 +$ helm upgrade -i authorizationk8sio-selfsubjectaccessreview-editor appscode/authorizationk8sio-selfsubjectaccessreview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SelfSubjectAccessReview Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `authorizationk8sio-selfsubjectaccessreview-editor`: ```bash -$ helm upgrade -i authorizationk8sio-selfsubjectaccessreview-editor appscode/authorizationk8sio-selfsubjectaccessreview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i authorizationk8sio-selfsubjectaccessreview-editor appscode/authorizationk8sio-selfsubjectaccessreview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SelfSubjectAccessReview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authorizationk8sio Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authorizationk8sio-selfsubjectaccessreview-editor appscode/authorizationk8sio-selfsubjectaccessreview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=authorization.k8s.io/v1 +$ helm upgrade -i authorizationk8sio-selfsubjectaccessreview-editor appscode/authorizationk8sio-selfsubjectaccessreview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=authorization.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authorizationk8sio-selfsubjectaccessreview-editor appscode/authorizationk8sio-selfsubjectaccessreview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i authorizationk8sio-selfsubjectaccessreview-editor appscode/authorizationk8sio-selfsubjectaccessreview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/authorizationk8sio-selfsubjectrulesreview-editor/Chart.yaml b/charts/authorizationk8sio-selfsubjectrulesreview-editor/Chart.yaml index 07e9f30bf9..9129903483 100644 --- a/charts/authorizationk8sio-selfsubjectrulesreview-editor/Chart.yaml +++ b/charts/authorizationk8sio-selfsubjectrulesreview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authorization.k8s.io","version":"v1","resource":"selfsubjectrulesreviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SelfSubjectRulesReview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authorizationk8sio-selfsubjectrulesreview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/authorizationk8sio-selfsubjectrulesreview-editor/README.md b/charts/authorizationk8sio-selfsubjectrulesreview-editor/README.md index e7d9fe679e..647a83c4f2 100644 --- a/charts/authorizationk8sio-selfsubjectrulesreview-editor/README.md +++ b/charts/authorizationk8sio-selfsubjectrulesreview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authorizationk8sio-selfsubjectrulesreview-editor --version=v0.23.0 -$ helm upgrade -i authorizationk8sio-selfsubjectrulesreview-editor appscode/authorizationk8sio-selfsubjectrulesreview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/authorizationk8sio-selfsubjectrulesreview-editor --version=v0.24.0 +$ helm upgrade -i authorizationk8sio-selfsubjectrulesreview-editor appscode/authorizationk8sio-selfsubjectrulesreview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SelfSubjectRulesReview Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `authorizationk8sio-selfsubjectrulesreview-editor`: ```bash -$ helm upgrade -i authorizationk8sio-selfsubjectrulesreview-editor appscode/authorizationk8sio-selfsubjectrulesreview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i authorizationk8sio-selfsubjectrulesreview-editor appscode/authorizationk8sio-selfsubjectrulesreview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SelfSubjectRulesReview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authorizationk8sio Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authorizationk8sio-selfsubjectrulesreview-editor appscode/authorizationk8sio-selfsubjectrulesreview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=authorization.k8s.io/v1 +$ helm upgrade -i authorizationk8sio-selfsubjectrulesreview-editor appscode/authorizationk8sio-selfsubjectrulesreview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=authorization.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authorizationk8sio-selfsubjectrulesreview-editor appscode/authorizationk8sio-selfsubjectrulesreview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i authorizationk8sio-selfsubjectrulesreview-editor appscode/authorizationk8sio-selfsubjectrulesreview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/authorizationk8sio-subjectaccessreview-editor/Chart.yaml b/charts/authorizationk8sio-subjectaccessreview-editor/Chart.yaml index 92f5ab9f37..82a6fcc354 100644 --- a/charts/authorizationk8sio-subjectaccessreview-editor/Chart.yaml +++ b/charts/authorizationk8sio-subjectaccessreview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"authorization.k8s.io","version":"v1","resource":"subjectaccessreviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SubjectAccessReview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: authorizationk8sio-subjectaccessreview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/authorizationk8sio-subjectaccessreview-editor/README.md b/charts/authorizationk8sio-subjectaccessreview-editor/README.md index 4a49ecbb67..163242d37f 100644 --- a/charts/authorizationk8sio-subjectaccessreview-editor/README.md +++ b/charts/authorizationk8sio-subjectaccessreview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/authorizationk8sio-subjectaccessreview-editor --version=v0.23.0 -$ helm upgrade -i authorizationk8sio-subjectaccessreview-editor appscode/authorizationk8sio-subjectaccessreview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/authorizationk8sio-subjectaccessreview-editor --version=v0.24.0 +$ helm upgrade -i authorizationk8sio-subjectaccessreview-editor appscode/authorizationk8sio-subjectaccessreview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SubjectAccessReview Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `authorizationk8sio-subjectaccessreview-editor`: ```bash -$ helm upgrade -i authorizationk8sio-subjectaccessreview-editor appscode/authorizationk8sio-subjectaccessreview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i authorizationk8sio-subjectaccessreview-editor appscode/authorizationk8sio-subjectaccessreview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SubjectAccessReview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `authorizationk8sio Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i authorizationk8sio-subjectaccessreview-editor appscode/authorizationk8sio-subjectaccessreview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=authorization.k8s.io/v1 +$ helm upgrade -i authorizationk8sio-subjectaccessreview-editor appscode/authorizationk8sio-subjectaccessreview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=authorization.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i authorizationk8sio-subjectaccessreview-editor appscode/authorizationk8sio-subjectaccessreview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i authorizationk8sio-subjectaccessreview-editor appscode/authorizationk8sio-subjectaccessreview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscaling-horizontalpodautoscaler-editor/Chart.yaml b/charts/autoscaling-horizontalpodautoscaler-editor/Chart.yaml index 1906bed464..2ea48ff6d8 100644 --- a/charts/autoscaling-horizontalpodautoscaler-editor/Chart.yaml +++ b/charts/autoscaling-horizontalpodautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling","version":"v2beta2","resource":"horizontalpodautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: HorizontalPodAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscaling-horizontalpodautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscaling-horizontalpodautoscaler-editor/README.md b/charts/autoscaling-horizontalpodautoscaler-editor/README.md index c56e5ea4ed..78ec698426 100644 --- a/charts/autoscaling-horizontalpodautoscaler-editor/README.md +++ b/charts/autoscaling-horizontalpodautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscaling-horizontalpodautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscaling-horizontalpodautoscaler-editor appscode/autoscaling-horizontalpodautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscaling-horizontalpodautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscaling-horizontalpodautoscaler-editor appscode/autoscaling-horizontalpodautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HorizontalPodAutoscaler Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `autoscaling-horizontalpodautoscaler-editor`: ```bash -$ helm upgrade -i autoscaling-horizontalpodautoscaler-editor appscode/autoscaling-horizontalpodautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscaling-horizontalpodautoscaler-editor appscode/autoscaling-horizontalpodautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a HorizontalPodAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscaling-horizo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscaling-horizontalpodautoscaler-editor appscode/autoscaling-horizontalpodautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling/v2beta2 +$ helm upgrade -i autoscaling-horizontalpodautoscaler-editor appscode/autoscaling-horizontalpodautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling/v2beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscaling-horizontalpodautoscaler-editor appscode/autoscaling-horizontalpodautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscaling-horizontalpodautoscaler-editor appscode/autoscaling-horizontalpodautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingk8sio-verticalpodautoscaler-editor/Chart.yaml b/charts/autoscalingk8sio-verticalpodautoscaler-editor/Chart.yaml index ac83fc116a..0157583f48 100644 --- a/charts/autoscalingk8sio-verticalpodautoscaler-editor/Chart.yaml +++ b/charts/autoscalingk8sio-verticalpodautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.k8s.io","version":"v1","resource":"verticalpodautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VerticalPodAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingk8sio-verticalpodautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingk8sio-verticalpodautoscaler-editor/README.md b/charts/autoscalingk8sio-verticalpodautoscaler-editor/README.md index 39b1af6edc..928a9d065c 100644 --- a/charts/autoscalingk8sio-verticalpodautoscaler-editor/README.md +++ b/charts/autoscalingk8sio-verticalpodautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingk8sio-verticalpodautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingk8sio-verticalpodautoscaler-editor appscode/autoscalingk8sio-verticalpodautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingk8sio-verticalpodautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingk8sio-verticalpodautoscaler-editor appscode/autoscalingk8sio-verticalpodautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VerticalPodAutoscaler Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `autoscalingk8sio-verticalpodautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingk8sio-verticalpodautoscaler-editor appscode/autoscalingk8sio-verticalpodautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingk8sio-verticalpodautoscaler-editor appscode/autoscalingk8sio-verticalpodautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VerticalPodAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingk8sio-v Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingk8sio-verticalpodautoscaler-editor appscode/autoscalingk8sio-verticalpodautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.k8s.io/v1 +$ helm upgrade -i autoscalingk8sio-verticalpodautoscaler-editor appscode/autoscalingk8sio-verticalpodautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingk8sio-verticalpodautoscaler-editor appscode/autoscalingk8sio-verticalpodautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingk8sio-verticalpodautoscaler-editor appscode/autoscalingk8sio-verticalpodautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingk8sio-verticalpodautoscalercheckpoint-editor/Chart.yaml b/charts/autoscalingk8sio-verticalpodautoscalercheckpoint-editor/Chart.yaml index 8d3cc16b8e..56912b6139 100644 --- a/charts/autoscalingk8sio-verticalpodautoscalercheckpoint-editor/Chart.yaml +++ b/charts/autoscalingk8sio-verticalpodautoscalercheckpoint-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.k8s.io","version":"v1","resource":"verticalpodautoscalercheckpoints"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VerticalPodAutoscalerCheckpoint Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingk8sio-verticalpodautoscalercheckpoint-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingk8sio-verticalpodautoscalercheckpoint-editor/README.md b/charts/autoscalingk8sio-verticalpodautoscalercheckpoint-editor/README.md index be203f0101..62abb44521 100644 --- a/charts/autoscalingk8sio-verticalpodautoscalercheckpoint-editor/README.md +++ b/charts/autoscalingk8sio-verticalpodautoscalercheckpoint-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor --version=v0.23.0 -$ helm upgrade -i autoscalingk8sio-verticalpodautoscalercheckpoint-editor appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor --version=v0.24.0 +$ helm upgrade -i autoscalingk8sio-verticalpodautoscalercheckpoint-editor appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VerticalPodAutoscalerCheckpoint Editor on a [Kubernetes](ht To install/upgrade the chart with the release name `autoscalingk8sio-verticalpodautoscalercheckpoint-editor`: ```bash -$ helm upgrade -i autoscalingk8sio-verticalpodautoscalercheckpoint-editor appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingk8sio-verticalpodautoscalercheckpoint-editor appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VerticalPodAutoscalerCheckpoint Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingk8sio-v Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingk8sio-verticalpodautoscalercheckpoint-editor appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.k8s.io/v1 +$ helm upgrade -i autoscalingk8sio-verticalpodautoscalercheckpoint-editor appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingk8sio-verticalpodautoscalercheckpoint-editor appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingk8sio-verticalpodautoscalercheckpoint-editor appscode/autoscalingk8sio-verticalpodautoscalercheckpoint-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-cassandraautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-cassandraautoscaler-editor/Chart.yaml index f04af55545..c7678146ef 100644 --- a/charts/autoscalingkubedbcom-cassandraautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-cassandraautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"cassandraautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: CassandraAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-cassandraautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-cassandraautoscaler-editor/README.md b/charts/autoscalingkubedbcom-cassandraautoscaler-editor/README.md index ce602b29fd..0ef7c62f2b 100644 --- a/charts/autoscalingkubedbcom-cassandraautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-cassandraautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-cassandraautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-cassandraautoscaler-editor appscode/autoscalingkubedbcom-cassandraautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-cassandraautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-cassandraautoscaler-editor appscode/autoscalingkubedbcom-cassandraautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CassandraAutoscaler Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `autoscalingkubedbcom-cassandraautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-cassandraautoscaler-editor appscode/autoscalingkubedbcom-cassandraautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-cassandraautoscaler-editor appscode/autoscalingkubedbcom-cassandraautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a CassandraAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-cassandraautoscaler-editor appscode/autoscalingkubedbcom-cassandraautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-cassandraautoscaler-editor appscode/autoscalingkubedbcom-cassandraautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-cassandraautoscaler-editor appscode/autoscalingkubedbcom-cassandraautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-cassandraautoscaler-editor appscode/autoscalingkubedbcom-cassandraautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-clickhouseautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-clickhouseautoscaler-editor/Chart.yaml index 38d95e153f..8ecef2d2e8 100644 --- a/charts/autoscalingkubedbcom-clickhouseautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-clickhouseautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"clickhouseautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClickHouseAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-clickhouseautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-clickhouseautoscaler-editor/README.md b/charts/autoscalingkubedbcom-clickhouseautoscaler-editor/README.md index 95480b43ac..58237fcf00 100644 --- a/charts/autoscalingkubedbcom-clickhouseautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-clickhouseautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-clickhouseautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-clickhouseautoscaler-editor appscode/autoscalingkubedbcom-clickhouseautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-clickhouseautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-clickhouseautoscaler-editor appscode/autoscalingkubedbcom-clickhouseautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClickHouseAutoscaler Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `autoscalingkubedbcom-clickhouseautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-clickhouseautoscaler-editor appscode/autoscalingkubedbcom-clickhouseautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-clickhouseautoscaler-editor appscode/autoscalingkubedbcom-clickhouseautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClickHouseAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-clickhouseautoscaler-editor appscode/autoscalingkubedbcom-clickhouseautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-clickhouseautoscaler-editor appscode/autoscalingkubedbcom-clickhouseautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-clickhouseautoscaler-editor appscode/autoscalingkubedbcom-clickhouseautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-clickhouseautoscaler-editor appscode/autoscalingkubedbcom-clickhouseautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-druidautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-druidautoscaler-editor/Chart.yaml index da13dcf2c1..1b5b71be1c 100644 --- a/charts/autoscalingkubedbcom-druidautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-druidautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"druidautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: DruidAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-druidautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-druidautoscaler-editor/README.md b/charts/autoscalingkubedbcom-druidautoscaler-editor/README.md index d0401732ea..566604e4b2 100644 --- a/charts/autoscalingkubedbcom-druidautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-druidautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-druidautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-druidautoscaler-editor appscode/autoscalingkubedbcom-druidautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-druidautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-druidautoscaler-editor appscode/autoscalingkubedbcom-druidautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DruidAutoscaler Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `autoscalingkubedbcom-druidautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-druidautoscaler-editor appscode/autoscalingkubedbcom-druidautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-druidautoscaler-editor appscode/autoscalingkubedbcom-druidautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a DruidAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-druidautoscaler-editor appscode/autoscalingkubedbcom-druidautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-druidautoscaler-editor appscode/autoscalingkubedbcom-druidautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-druidautoscaler-editor appscode/autoscalingkubedbcom-druidautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-druidautoscaler-editor appscode/autoscalingkubedbcom-druidautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-elasticsearchautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-elasticsearchautoscaler-editor/Chart.yaml index 27909bf28f..f510f3ebba 100644 --- a/charts/autoscalingkubedbcom-elasticsearchautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-elasticsearchautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"elasticsearchautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ElasticsearchAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-elasticsearchautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-elasticsearchautoscaler-editor/README.md b/charts/autoscalingkubedbcom-elasticsearchautoscaler-editor/README.md index 7cee975329..09ed25d878 100644 --- a/charts/autoscalingkubedbcom-elasticsearchautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-elasticsearchautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-elasticsearchautoscaler-editor appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-elasticsearchautoscaler-editor appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchAutoscaler Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `autoscalingkubedbcom-elasticsearchautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-elasticsearchautoscaler-editor appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-elasticsearchautoscaler-editor appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ElasticsearchAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-elasticsearchautoscaler-editor appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-elasticsearchautoscaler-editor appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-elasticsearchautoscaler-editor appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-elasticsearchautoscaler-editor appscode/autoscalingkubedbcom-elasticsearchautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-etcdautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-etcdautoscaler-editor/Chart.yaml index baee4f1b46..adb3159d19 100644 --- a/charts/autoscalingkubedbcom-etcdautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-etcdautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"etcdautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: EtcdAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-etcdautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-etcdautoscaler-editor/README.md b/charts/autoscalingkubedbcom-etcdautoscaler-editor/README.md index c41de8c52c..d48d8bb2af 100644 --- a/charts/autoscalingkubedbcom-etcdautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-etcdautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-etcdautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-etcdautoscaler-editor appscode/autoscalingkubedbcom-etcdautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-etcdautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-etcdautoscaler-editor appscode/autoscalingkubedbcom-etcdautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EtcdAutoscaler Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `autoscalingkubedbcom-etcdautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-etcdautoscaler-editor appscode/autoscalingkubedbcom-etcdautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-etcdautoscaler-editor appscode/autoscalingkubedbcom-etcdautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a EtcdAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-etcdautoscaler-editor appscode/autoscalingkubedbcom-etcdautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-etcdautoscaler-editor appscode/autoscalingkubedbcom-etcdautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-etcdautoscaler-editor appscode/autoscalingkubedbcom-etcdautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-etcdautoscaler-editor appscode/autoscalingkubedbcom-etcdautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-ferretdbautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-ferretdbautoscaler-editor/Chart.yaml index 06d87520bb..33248e7be2 100644 --- a/charts/autoscalingkubedbcom-ferretdbautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-ferretdbautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"ferretdbautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FerretDBAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-ferretdbautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-ferretdbautoscaler-editor/README.md b/charts/autoscalingkubedbcom-ferretdbautoscaler-editor/README.md index f4d80041bf..c9086fcc2f 100644 --- a/charts/autoscalingkubedbcom-ferretdbautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-ferretdbautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-ferretdbautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-ferretdbautoscaler-editor appscode/autoscalingkubedbcom-ferretdbautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-ferretdbautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-ferretdbautoscaler-editor appscode/autoscalingkubedbcom-ferretdbautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FerretDBAutoscaler Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `autoscalingkubedbcom-ferretdbautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-ferretdbautoscaler-editor appscode/autoscalingkubedbcom-ferretdbautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-ferretdbautoscaler-editor appscode/autoscalingkubedbcom-ferretdbautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FerretDBAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-ferretdbautoscaler-editor appscode/autoscalingkubedbcom-ferretdbautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-ferretdbautoscaler-editor appscode/autoscalingkubedbcom-ferretdbautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-ferretdbautoscaler-editor appscode/autoscalingkubedbcom-ferretdbautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-ferretdbautoscaler-editor appscode/autoscalingkubedbcom-ferretdbautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-hazelcastautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-hazelcastautoscaler-editor/Chart.yaml index 013eed723b..ed27f95eaa 100644 --- a/charts/autoscalingkubedbcom-hazelcastautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-hazelcastautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"hazelcastautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: HazelcastAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-hazelcastautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-hazelcastautoscaler-editor/README.md b/charts/autoscalingkubedbcom-hazelcastautoscaler-editor/README.md index 022696709d..3689a3a16c 100644 --- a/charts/autoscalingkubedbcom-hazelcastautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-hazelcastautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-hazelcastautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-hazelcastautoscaler-editor appscode/autoscalingkubedbcom-hazelcastautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-hazelcastautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-hazelcastautoscaler-editor appscode/autoscalingkubedbcom-hazelcastautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HazelcastAutoscaler Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `autoscalingkubedbcom-hazelcastautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-hazelcastautoscaler-editor appscode/autoscalingkubedbcom-hazelcastautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-hazelcastautoscaler-editor appscode/autoscalingkubedbcom-hazelcastautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a HazelcastAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-hazelcastautoscaler-editor appscode/autoscalingkubedbcom-hazelcastautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-hazelcastautoscaler-editor appscode/autoscalingkubedbcom-hazelcastautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-hazelcastautoscaler-editor appscode/autoscalingkubedbcom-hazelcastautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-hazelcastautoscaler-editor appscode/autoscalingkubedbcom-hazelcastautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-kafkaautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-kafkaautoscaler-editor/Chart.yaml index 2cb7b4d3ce..5b508628a0 100644 --- a/charts/autoscalingkubedbcom-kafkaautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-kafkaautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"kafkaautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: KafkaAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-kafkaautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-kafkaautoscaler-editor/README.md b/charts/autoscalingkubedbcom-kafkaautoscaler-editor/README.md index deb33583d8..60e374910d 100644 --- a/charts/autoscalingkubedbcom-kafkaautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-kafkaautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-kafkaautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-kafkaautoscaler-editor appscode/autoscalingkubedbcom-kafkaautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-kafkaautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-kafkaautoscaler-editor appscode/autoscalingkubedbcom-kafkaautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KafkaAutoscaler Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `autoscalingkubedbcom-kafkaautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-kafkaautoscaler-editor appscode/autoscalingkubedbcom-kafkaautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-kafkaautoscaler-editor appscode/autoscalingkubedbcom-kafkaautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a KafkaAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-kafkaautoscaler-editor appscode/autoscalingkubedbcom-kafkaautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-kafkaautoscaler-editor appscode/autoscalingkubedbcom-kafkaautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-kafkaautoscaler-editor appscode/autoscalingkubedbcom-kafkaautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-kafkaautoscaler-editor appscode/autoscalingkubedbcom-kafkaautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-mariadbautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-mariadbautoscaler-editor/Chart.yaml index 99a51496b7..d8fccc6b5b 100644 --- a/charts/autoscalingkubedbcom-mariadbautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-mariadbautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"mariadbautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MariaDBAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-mariadbautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-mariadbautoscaler-editor/README.md b/charts/autoscalingkubedbcom-mariadbautoscaler-editor/README.md index 1d7194c651..3b262a026c 100644 --- a/charts/autoscalingkubedbcom-mariadbautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-mariadbautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-mariadbautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-mariadbautoscaler-editor appscode/autoscalingkubedbcom-mariadbautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-mariadbautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-mariadbautoscaler-editor appscode/autoscalingkubedbcom-mariadbautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBAutoscaler Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `autoscalingkubedbcom-mariadbautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-mariadbautoscaler-editor appscode/autoscalingkubedbcom-mariadbautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-mariadbautoscaler-editor appscode/autoscalingkubedbcom-mariadbautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MariaDBAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-mariadbautoscaler-editor appscode/autoscalingkubedbcom-mariadbautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-mariadbautoscaler-editor appscode/autoscalingkubedbcom-mariadbautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-mariadbautoscaler-editor appscode/autoscalingkubedbcom-mariadbautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-mariadbautoscaler-editor appscode/autoscalingkubedbcom-mariadbautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-memcachedautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-memcachedautoscaler-editor/Chart.yaml index 4656daac45..641edb701e 100644 --- a/charts/autoscalingkubedbcom-memcachedautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-memcachedautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"memcachedautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MemcachedAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-memcachedautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-memcachedautoscaler-editor/README.md b/charts/autoscalingkubedbcom-memcachedautoscaler-editor/README.md index a2d24a1de3..f5a9148b5a 100644 --- a/charts/autoscalingkubedbcom-memcachedautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-memcachedautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-memcachedautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-memcachedautoscaler-editor appscode/autoscalingkubedbcom-memcachedautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-memcachedautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-memcachedautoscaler-editor appscode/autoscalingkubedbcom-memcachedautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MemcachedAutoscaler Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `autoscalingkubedbcom-memcachedautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-memcachedautoscaler-editor appscode/autoscalingkubedbcom-memcachedautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-memcachedautoscaler-editor appscode/autoscalingkubedbcom-memcachedautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MemcachedAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-memcachedautoscaler-editor appscode/autoscalingkubedbcom-memcachedautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-memcachedautoscaler-editor appscode/autoscalingkubedbcom-memcachedautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-memcachedautoscaler-editor appscode/autoscalingkubedbcom-memcachedautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-memcachedautoscaler-editor appscode/autoscalingkubedbcom-memcachedautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-mongodbautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-mongodbautoscaler-editor/Chart.yaml index e1b2417943..704db2bded 100644 --- a/charts/autoscalingkubedbcom-mongodbautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-mongodbautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"mongodbautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MongoDBAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-mongodbautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-mongodbautoscaler-editor/README.md b/charts/autoscalingkubedbcom-mongodbautoscaler-editor/README.md index 1553fda65a..9eb1282d85 100644 --- a/charts/autoscalingkubedbcom-mongodbautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-mongodbautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-mongodbautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-mongodbautoscaler-editor appscode/autoscalingkubedbcom-mongodbautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-mongodbautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-mongodbautoscaler-editor appscode/autoscalingkubedbcom-mongodbautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBAutoscaler Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `autoscalingkubedbcom-mongodbautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-mongodbautoscaler-editor appscode/autoscalingkubedbcom-mongodbautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-mongodbautoscaler-editor appscode/autoscalingkubedbcom-mongodbautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MongoDBAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-mongodbautoscaler-editor appscode/autoscalingkubedbcom-mongodbautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-mongodbautoscaler-editor appscode/autoscalingkubedbcom-mongodbautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-mongodbautoscaler-editor appscode/autoscalingkubedbcom-mongodbautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-mongodbautoscaler-editor appscode/autoscalingkubedbcom-mongodbautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-mssqlserverautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-mssqlserverautoscaler-editor/Chart.yaml index 1d8687274b..c5aa6c19be 100644 --- a/charts/autoscalingkubedbcom-mssqlserverautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-mssqlserverautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"mssqlserverautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLServerAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-mssqlserverautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-mssqlserverautoscaler-editor/README.md b/charts/autoscalingkubedbcom-mssqlserverautoscaler-editor/README.md index 75997f72ec..99f8f707ce 100644 --- a/charts/autoscalingkubedbcom-mssqlserverautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-mssqlserverautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-mssqlserverautoscaler-editor appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-mssqlserverautoscaler-editor appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerAutoscaler Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `autoscalingkubedbcom-mssqlserverautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-mssqlserverautoscaler-editor appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-mssqlserverautoscaler-editor appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLServerAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-mssqlserverautoscaler-editor appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-mssqlserverautoscaler-editor appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-mssqlserverautoscaler-editor appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-mssqlserverautoscaler-editor appscode/autoscalingkubedbcom-mssqlserverautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-mysqlautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-mysqlautoscaler-editor/Chart.yaml index 0376c739ce..ec3cdfe554 100644 --- a/charts/autoscalingkubedbcom-mysqlautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-mysqlautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"mysqlautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MySQLAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-mysqlautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-mysqlautoscaler-editor/README.md b/charts/autoscalingkubedbcom-mysqlautoscaler-editor/README.md index 63b88ed93d..e410d8da02 100644 --- a/charts/autoscalingkubedbcom-mysqlautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-mysqlautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-mysqlautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-mysqlautoscaler-editor appscode/autoscalingkubedbcom-mysqlautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-mysqlautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-mysqlautoscaler-editor appscode/autoscalingkubedbcom-mysqlautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLAutoscaler Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `autoscalingkubedbcom-mysqlautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-mysqlautoscaler-editor appscode/autoscalingkubedbcom-mysqlautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-mysqlautoscaler-editor appscode/autoscalingkubedbcom-mysqlautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MySQLAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-mysqlautoscaler-editor appscode/autoscalingkubedbcom-mysqlautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-mysqlautoscaler-editor appscode/autoscalingkubedbcom-mysqlautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-mysqlautoscaler-editor appscode/autoscalingkubedbcom-mysqlautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-mysqlautoscaler-editor appscode/autoscalingkubedbcom-mysqlautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-perconaxtradbautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-perconaxtradbautoscaler-editor/Chart.yaml index 1de5087f99..f16b3b5c62 100644 --- a/charts/autoscalingkubedbcom-perconaxtradbautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-perconaxtradbautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"perconaxtradbautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PerconaXtraDBAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-perconaxtradbautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-perconaxtradbautoscaler-editor/README.md b/charts/autoscalingkubedbcom-perconaxtradbautoscaler-editor/README.md index 9c057664b6..c07bc77faf 100644 --- a/charts/autoscalingkubedbcom-perconaxtradbautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-perconaxtradbautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-perconaxtradbautoscaler-editor appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-perconaxtradbautoscaler-editor appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PerconaXtraDBAutoscaler Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `autoscalingkubedbcom-perconaxtradbautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-perconaxtradbautoscaler-editor appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-perconaxtradbautoscaler-editor appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PerconaXtraDBAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-perconaxtradbautoscaler-editor appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-perconaxtradbautoscaler-editor appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-perconaxtradbautoscaler-editor appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-perconaxtradbautoscaler-editor appscode/autoscalingkubedbcom-perconaxtradbautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-pgbouncerautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-pgbouncerautoscaler-editor/Chart.yaml index da7c78357b..0f40496a3b 100644 --- a/charts/autoscalingkubedbcom-pgbouncerautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-pgbouncerautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"pgbouncerautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PgBouncerAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-pgbouncerautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-pgbouncerautoscaler-editor/README.md b/charts/autoscalingkubedbcom-pgbouncerautoscaler-editor/README.md index d7742dd2a8..621bcdde4b 100644 --- a/charts/autoscalingkubedbcom-pgbouncerautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-pgbouncerautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-pgbouncerautoscaler-editor appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-pgbouncerautoscaler-editor appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerAutoscaler Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `autoscalingkubedbcom-pgbouncerautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-pgbouncerautoscaler-editor appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-pgbouncerautoscaler-editor appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PgBouncerAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-pgbouncerautoscaler-editor appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-pgbouncerautoscaler-editor appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-pgbouncerautoscaler-editor appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-pgbouncerautoscaler-editor appscode/autoscalingkubedbcom-pgbouncerautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-pgpoolautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-pgpoolautoscaler-editor/Chart.yaml index bb7a34715c..465b6b065f 100644 --- a/charts/autoscalingkubedbcom-pgpoolautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-pgpoolautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"pgpoolautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PgpoolAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-pgpoolautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-pgpoolautoscaler-editor/README.md b/charts/autoscalingkubedbcom-pgpoolautoscaler-editor/README.md index cf149dcedd..faaf158ded 100644 --- a/charts/autoscalingkubedbcom-pgpoolautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-pgpoolautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-pgpoolautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-pgpoolautoscaler-editor appscode/autoscalingkubedbcom-pgpoolautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-pgpoolautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-pgpoolautoscaler-editor appscode/autoscalingkubedbcom-pgpoolautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgpoolAutoscaler Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `autoscalingkubedbcom-pgpoolautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-pgpoolautoscaler-editor appscode/autoscalingkubedbcom-pgpoolautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-pgpoolautoscaler-editor appscode/autoscalingkubedbcom-pgpoolautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PgpoolAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-pgpoolautoscaler-editor appscode/autoscalingkubedbcom-pgpoolautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-pgpoolautoscaler-editor appscode/autoscalingkubedbcom-pgpoolautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-pgpoolautoscaler-editor appscode/autoscalingkubedbcom-pgpoolautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-pgpoolautoscaler-editor appscode/autoscalingkubedbcom-pgpoolautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-postgresautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-postgresautoscaler-editor/Chart.yaml index a9f7019c27..4078a21a21 100644 --- a/charts/autoscalingkubedbcom-postgresautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-postgresautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"postgresautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PostgresAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-postgresautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-postgresautoscaler-editor/README.md b/charts/autoscalingkubedbcom-postgresautoscaler-editor/README.md index a41cbae1de..aac2ae4e05 100644 --- a/charts/autoscalingkubedbcom-postgresautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-postgresautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-postgresautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-postgresautoscaler-editor appscode/autoscalingkubedbcom-postgresautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-postgresautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-postgresautoscaler-editor appscode/autoscalingkubedbcom-postgresautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresAutoscaler Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `autoscalingkubedbcom-postgresautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-postgresautoscaler-editor appscode/autoscalingkubedbcom-postgresautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-postgresautoscaler-editor appscode/autoscalingkubedbcom-postgresautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PostgresAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-postgresautoscaler-editor appscode/autoscalingkubedbcom-postgresautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-postgresautoscaler-editor appscode/autoscalingkubedbcom-postgresautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-postgresautoscaler-editor appscode/autoscalingkubedbcom-postgresautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-postgresautoscaler-editor appscode/autoscalingkubedbcom-postgresautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-proxysqlautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-proxysqlautoscaler-editor/Chart.yaml index 7f300cb710..58f87d172e 100644 --- a/charts/autoscalingkubedbcom-proxysqlautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-proxysqlautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"proxysqlautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProxySQLAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-proxysqlautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-proxysqlautoscaler-editor/README.md b/charts/autoscalingkubedbcom-proxysqlautoscaler-editor/README.md index 35c92f6fe9..5a873780bd 100644 --- a/charts/autoscalingkubedbcom-proxysqlautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-proxysqlautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-proxysqlautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-proxysqlautoscaler-editor appscode/autoscalingkubedbcom-proxysqlautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-proxysqlautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-proxysqlautoscaler-editor appscode/autoscalingkubedbcom-proxysqlautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQLAutoscaler Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `autoscalingkubedbcom-proxysqlautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-proxysqlautoscaler-editor appscode/autoscalingkubedbcom-proxysqlautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-proxysqlautoscaler-editor appscode/autoscalingkubedbcom-proxysqlautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProxySQLAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-proxysqlautoscaler-editor appscode/autoscalingkubedbcom-proxysqlautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-proxysqlautoscaler-editor appscode/autoscalingkubedbcom-proxysqlautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-proxysqlautoscaler-editor appscode/autoscalingkubedbcom-proxysqlautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-proxysqlautoscaler-editor appscode/autoscalingkubedbcom-proxysqlautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-rabbitmqautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-rabbitmqautoscaler-editor/Chart.yaml index 6518bde1c6..8170bddabf 100644 --- a/charts/autoscalingkubedbcom-rabbitmqautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-rabbitmqautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"rabbitmqautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RabbitMQAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-rabbitmqautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-rabbitmqautoscaler-editor/README.md b/charts/autoscalingkubedbcom-rabbitmqautoscaler-editor/README.md index 084a070385..cac4f48341 100644 --- a/charts/autoscalingkubedbcom-rabbitmqautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-rabbitmqautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-rabbitmqautoscaler-editor appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-rabbitmqautoscaler-editor appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RabbitMQAutoscaler Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `autoscalingkubedbcom-rabbitmqautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-rabbitmqautoscaler-editor appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-rabbitmqautoscaler-editor appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RabbitMQAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-rabbitmqautoscaler-editor appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-rabbitmqautoscaler-editor appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-rabbitmqautoscaler-editor appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-rabbitmqautoscaler-editor appscode/autoscalingkubedbcom-rabbitmqautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-redisautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-redisautoscaler-editor/Chart.yaml index 1a71a0ebca..42a0abb02d 100644 --- a/charts/autoscalingkubedbcom-redisautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-redisautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"redisautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-redisautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-redisautoscaler-editor/README.md b/charts/autoscalingkubedbcom-redisautoscaler-editor/README.md index cc5f6ea336..0a374b01bb 100644 --- a/charts/autoscalingkubedbcom-redisautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-redisautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-redisautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-redisautoscaler-editor appscode/autoscalingkubedbcom-redisautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-redisautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-redisautoscaler-editor appscode/autoscalingkubedbcom-redisautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisAutoscaler Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `autoscalingkubedbcom-redisautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-redisautoscaler-editor appscode/autoscalingkubedbcom-redisautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-redisautoscaler-editor appscode/autoscalingkubedbcom-redisautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-redisautoscaler-editor appscode/autoscalingkubedbcom-redisautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-redisautoscaler-editor appscode/autoscalingkubedbcom-redisautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-redisautoscaler-editor appscode/autoscalingkubedbcom-redisautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-redisautoscaler-editor appscode/autoscalingkubedbcom-redisautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-redissentinelautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-redissentinelautoscaler-editor/Chart.yaml index 4242ba0435..5da7c94271 100644 --- a/charts/autoscalingkubedbcom-redissentinelautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-redissentinelautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"redissentinelautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisSentinelAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-redissentinelautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-redissentinelautoscaler-editor/README.md b/charts/autoscalingkubedbcom-redissentinelautoscaler-editor/README.md index 3ed02e2cbf..c6fa4e0f8a 100644 --- a/charts/autoscalingkubedbcom-redissentinelautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-redissentinelautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-redissentinelautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-redissentinelautoscaler-editor appscode/autoscalingkubedbcom-redissentinelautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-redissentinelautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-redissentinelautoscaler-editor appscode/autoscalingkubedbcom-redissentinelautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisSentinelAutoscaler Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `autoscalingkubedbcom-redissentinelautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-redissentinelautoscaler-editor appscode/autoscalingkubedbcom-redissentinelautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-redissentinelautoscaler-editor appscode/autoscalingkubedbcom-redissentinelautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisSentinelAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-redissentinelautoscaler-editor appscode/autoscalingkubedbcom-redissentinelautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-redissentinelautoscaler-editor appscode/autoscalingkubedbcom-redissentinelautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-redissentinelautoscaler-editor appscode/autoscalingkubedbcom-redissentinelautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-redissentinelautoscaler-editor appscode/autoscalingkubedbcom-redissentinelautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-singlestoreautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-singlestoreautoscaler-editor/Chart.yaml index 4fa0d53347..1e8886ed13 100644 --- a/charts/autoscalingkubedbcom-singlestoreautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-singlestoreautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"singlestoreautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SinglestoreAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-singlestoreautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-singlestoreautoscaler-editor/README.md b/charts/autoscalingkubedbcom-singlestoreautoscaler-editor/README.md index a6d6d43a11..d76c9619dc 100644 --- a/charts/autoscalingkubedbcom-singlestoreautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-singlestoreautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-singlestoreautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-singlestoreautoscaler-editor appscode/autoscalingkubedbcom-singlestoreautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-singlestoreautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-singlestoreautoscaler-editor appscode/autoscalingkubedbcom-singlestoreautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SinglestoreAutoscaler Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `autoscalingkubedbcom-singlestoreautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-singlestoreautoscaler-editor appscode/autoscalingkubedbcom-singlestoreautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-singlestoreautoscaler-editor appscode/autoscalingkubedbcom-singlestoreautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SinglestoreAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-singlestoreautoscaler-editor appscode/autoscalingkubedbcom-singlestoreautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-singlestoreautoscaler-editor appscode/autoscalingkubedbcom-singlestoreautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-singlestoreautoscaler-editor appscode/autoscalingkubedbcom-singlestoreautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-singlestoreautoscaler-editor appscode/autoscalingkubedbcom-singlestoreautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-solrautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-solrautoscaler-editor/Chart.yaml index 5484234e0a..e4a6ee137a 100644 --- a/charts/autoscalingkubedbcom-solrautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-solrautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"solrautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SolrAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-solrautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-solrautoscaler-editor/README.md b/charts/autoscalingkubedbcom-solrautoscaler-editor/README.md index 16c1bbf23b..bd43f54850 100644 --- a/charts/autoscalingkubedbcom-solrautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-solrautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-solrautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-solrautoscaler-editor appscode/autoscalingkubedbcom-solrautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-solrautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-solrautoscaler-editor appscode/autoscalingkubedbcom-solrautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SolrAutoscaler Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `autoscalingkubedbcom-solrautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-solrautoscaler-editor appscode/autoscalingkubedbcom-solrautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-solrautoscaler-editor appscode/autoscalingkubedbcom-solrautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SolrAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-solrautoscaler-editor appscode/autoscalingkubedbcom-solrautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-solrautoscaler-editor appscode/autoscalingkubedbcom-solrautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-solrautoscaler-editor appscode/autoscalingkubedbcom-solrautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-solrautoscaler-editor appscode/autoscalingkubedbcom-solrautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-verticalautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-verticalautoscaler-editor/Chart.yaml index ab8d63a52e..96bfeb517b 100644 --- a/charts/autoscalingkubedbcom-verticalautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-verticalautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"verticalautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VerticalAutoscaler Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-verticalautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-verticalautoscaler-editor/README.md b/charts/autoscalingkubedbcom-verticalautoscaler-editor/README.md index a62286e84e..92b4959110 100644 --- a/charts/autoscalingkubedbcom-verticalautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-verticalautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-verticalautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-verticalautoscaler-editor appscode/autoscalingkubedbcom-verticalautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-verticalautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-verticalautoscaler-editor appscode/autoscalingkubedbcom-verticalautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VerticalAutoscaler Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `autoscalingkubedbcom-verticalautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-verticalautoscaler-editor appscode/autoscalingkubedbcom-verticalautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-verticalautoscaler-editor appscode/autoscalingkubedbcom-verticalautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VerticalAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-verticalautoscaler-editor appscode/autoscalingkubedbcom-verticalautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-verticalautoscaler-editor appscode/autoscalingkubedbcom-verticalautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-verticalautoscaler-editor appscode/autoscalingkubedbcom-verticalautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-verticalautoscaler-editor appscode/autoscalingkubedbcom-verticalautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-verticalautoscalercheckpoint-editor/Chart.yaml b/charts/autoscalingkubedbcom-verticalautoscalercheckpoint-editor/Chart.yaml index eb8a36b485..ec9c58c8e6 100644 --- a/charts/autoscalingkubedbcom-verticalautoscalercheckpoint-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-verticalautoscalercheckpoint-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"verticalautoscalercheckpoints"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VerticalAutoscalerCheckpoint Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-verticalautoscalercheckpoint-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-verticalautoscalercheckpoint-editor/README.md b/charts/autoscalingkubedbcom-verticalautoscalercheckpoint-editor/README.md index 704a60ade2..d6dde88923 100644 --- a/charts/autoscalingkubedbcom-verticalautoscalercheckpoint-editor/README.md +++ b/charts/autoscalingkubedbcom-verticalautoscalercheckpoint-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-verticalautoscalercheckpoint-editor appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-verticalautoscalercheckpoint-editor appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VerticalAutoscalerCheckpoint Editor on a [Kubernetes](http: To install/upgrade the chart with the release name `autoscalingkubedbcom-verticalautoscalercheckpoint-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-verticalautoscalercheckpoint-editor appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-verticalautoscalercheckpoint-editor appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VerticalAutoscalerCheckpoint Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-verticalautoscalercheckpoint-editor appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-verticalautoscalercheckpoint-editor appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-verticalautoscalercheckpoint-editor appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-verticalautoscalercheckpoint-editor appscode/autoscalingkubedbcom-verticalautoscalercheckpoint-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/autoscalingkubedbcom-zookeeperautoscaler-editor/Chart.yaml b/charts/autoscalingkubedbcom-zookeeperautoscaler-editor/Chart.yaml index cbdb9fedd3..913341c8c6 100644 --- a/charts/autoscalingkubedbcom-zookeeperautoscaler-editor/Chart.yaml +++ b/charts/autoscalingkubedbcom-zookeeperautoscaler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"autoscaling.kubedb.com","version":"v1alpha1","resource":"zookeeperautoscalers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ZooKeeperAutoscaler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: autoscalingkubedbcom-zookeeperautoscaler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/autoscalingkubedbcom-zookeeperautoscaler-editor/README.md b/charts/autoscalingkubedbcom-zookeeperautoscaler-editor/README.md index 442220f476..642f6b0f20 100644 --- a/charts/autoscalingkubedbcom-zookeeperautoscaler-editor/README.md +++ b/charts/autoscalingkubedbcom-zookeeperautoscaler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/autoscalingkubedbcom-zookeeperautoscaler-editor --version=v0.23.0 -$ helm upgrade -i autoscalingkubedbcom-zookeeperautoscaler-editor appscode/autoscalingkubedbcom-zookeeperautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/autoscalingkubedbcom-zookeeperautoscaler-editor --version=v0.24.0 +$ helm upgrade -i autoscalingkubedbcom-zookeeperautoscaler-editor appscode/autoscalingkubedbcom-zookeeperautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ZooKeeperAutoscaler Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `autoscalingkubedbcom-zookeeperautoscaler-editor`: ```bash -$ helm upgrade -i autoscalingkubedbcom-zookeeperautoscaler-editor appscode/autoscalingkubedbcom-zookeeperautoscaler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i autoscalingkubedbcom-zookeeperautoscaler-editor appscode/autoscalingkubedbcom-zookeeperautoscaler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ZooKeeperAutoscaler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `autoscalingkubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-zookeeperautoscaler-editor appscode/autoscalingkubedbcom-zookeeperautoscaler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 +$ helm upgrade -i autoscalingkubedbcom-zookeeperautoscaler-editor appscode/autoscalingkubedbcom-zookeeperautoscaler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=autoscaling.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i autoscalingkubedbcom-zookeeperautoscaler-editor appscode/autoscalingkubedbcom-zookeeperautoscaler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i autoscalingkubedbcom-zookeeperautoscaler-editor appscode/autoscalingkubedbcom-zookeeperautoscaler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/awskubedbcom-providerconfig-editor/Chart.yaml b/charts/awskubedbcom-providerconfig-editor/Chart.yaml index 787b7e9a19..a84682f942 100644 --- a/charts/awskubedbcom-providerconfig-editor/Chart.yaml +++ b/charts/awskubedbcom-providerconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"aws.kubedb.com","version":"v1beta1","resource":"providerconfigs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProviderConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: awskubedbcom-providerconfig-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/awskubedbcom-providerconfig-editor/README.md b/charts/awskubedbcom-providerconfig-editor/README.md index 76a7357ed2..088d6a40ff 100644 --- a/charts/awskubedbcom-providerconfig-editor/README.md +++ b/charts/awskubedbcom-providerconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/awskubedbcom-providerconfig-editor --version=v0.23.0 -$ helm upgrade -i awskubedbcom-providerconfig-editor appscode/awskubedbcom-providerconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/awskubedbcom-providerconfig-editor --version=v0.24.0 +$ helm upgrade -i awskubedbcom-providerconfig-editor appscode/awskubedbcom-providerconfig-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProviderConfig Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `awskubedbcom-providerconfig-editor`: ```bash -$ helm upgrade -i awskubedbcom-providerconfig-editor appscode/awskubedbcom-providerconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i awskubedbcom-providerconfig-editor appscode/awskubedbcom-providerconfig-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProviderConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `awskubedbcom-provi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i awskubedbcom-providerconfig-editor appscode/awskubedbcom-providerconfig-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=aws.kubedb.com/v1beta1 +$ helm upgrade -i awskubedbcom-providerconfig-editor appscode/awskubedbcom-providerconfig-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=aws.kubedb.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i awskubedbcom-providerconfig-editor appscode/awskubedbcom-providerconfig-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i awskubedbcom-providerconfig-editor appscode/awskubedbcom-providerconfig-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/awskubedbcom-providerconfigusage-editor/Chart.yaml b/charts/awskubedbcom-providerconfigusage-editor/Chart.yaml index 65b787b2f0..2d5a8baef4 100644 --- a/charts/awskubedbcom-providerconfigusage-editor/Chart.yaml +++ b/charts/awskubedbcom-providerconfigusage-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"aws.kubedb.com","version":"v1beta1","resource":"providerconfigusages"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProviderConfigUsage Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: awskubedbcom-providerconfigusage-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/awskubedbcom-providerconfigusage-editor/README.md b/charts/awskubedbcom-providerconfigusage-editor/README.md index 36e14c9baf..3d75156e06 100644 --- a/charts/awskubedbcom-providerconfigusage-editor/README.md +++ b/charts/awskubedbcom-providerconfigusage-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/awskubedbcom-providerconfigusage-editor --version=v0.23.0 -$ helm upgrade -i awskubedbcom-providerconfigusage-editor appscode/awskubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/awskubedbcom-providerconfigusage-editor --version=v0.24.0 +$ helm upgrade -i awskubedbcom-providerconfigusage-editor appscode/awskubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProviderConfigUsage Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `awskubedbcom-providerconfigusage-editor`: ```bash -$ helm upgrade -i awskubedbcom-providerconfigusage-editor appscode/awskubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i awskubedbcom-providerconfigusage-editor appscode/awskubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProviderConfigUsage Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `awskubedbcom-provi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i awskubedbcom-providerconfigusage-editor appscode/awskubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=aws.kubedb.com/v1beta1 +$ helm upgrade -i awskubedbcom-providerconfigusage-editor appscode/awskubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=aws.kubedb.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i awskubedbcom-providerconfigusage-editor appscode/awskubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i awskubedbcom-providerconfigusage-editor appscode/awskubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/awskubedbcom-storeconfig-editor/Chart.yaml b/charts/awskubedbcom-storeconfig-editor/Chart.yaml index 31c1fbbfa3..7e8f2e678b 100644 --- a/charts/awskubedbcom-storeconfig-editor/Chart.yaml +++ b/charts/awskubedbcom-storeconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"aws.kubedb.com","version":"v1alpha1","resource":"storeconfigs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: StoreConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: awskubedbcom-storeconfig-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/awskubedbcom-storeconfig-editor/README.md b/charts/awskubedbcom-storeconfig-editor/README.md index f604a64e33..7dbec2553f 100644 --- a/charts/awskubedbcom-storeconfig-editor/README.md +++ b/charts/awskubedbcom-storeconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/awskubedbcom-storeconfig-editor --version=v0.23.0 -$ helm upgrade -i awskubedbcom-storeconfig-editor appscode/awskubedbcom-storeconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/awskubedbcom-storeconfig-editor --version=v0.24.0 +$ helm upgrade -i awskubedbcom-storeconfig-editor appscode/awskubedbcom-storeconfig-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a StoreConfig Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `awskubedbcom-storeconfig-editor`: ```bash -$ helm upgrade -i awskubedbcom-storeconfig-editor appscode/awskubedbcom-storeconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i awskubedbcom-storeconfig-editor appscode/awskubedbcom-storeconfig-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a StoreConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `awskubedbcom-store Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i awskubedbcom-storeconfig-editor appscode/awskubedbcom-storeconfig-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=aws.kubedb.com/v1alpha1 +$ helm upgrade -i awskubedbcom-storeconfig-editor appscode/awskubedbcom-storeconfig-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i awskubedbcom-storeconfig-editor appscode/awskubedbcom-storeconfig-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i awskubedbcom-storeconfig-editor appscode/awskubedbcom-storeconfig-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/azurekubedbcom-providerconfig-editor/Chart.yaml b/charts/azurekubedbcom-providerconfig-editor/Chart.yaml index e66b5891a8..c75eb5b9e4 100644 --- a/charts/azurekubedbcom-providerconfig-editor/Chart.yaml +++ b/charts/azurekubedbcom-providerconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"azure.kubedb.com","version":"v1beta1","resource":"providerconfigs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProviderConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: azurekubedbcom-providerconfig-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/azurekubedbcom-providerconfig-editor/README.md b/charts/azurekubedbcom-providerconfig-editor/README.md index 0da64ead58..916c00e39c 100644 --- a/charts/azurekubedbcom-providerconfig-editor/README.md +++ b/charts/azurekubedbcom-providerconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/azurekubedbcom-providerconfig-editor --version=v0.23.0 -$ helm upgrade -i azurekubedbcom-providerconfig-editor appscode/azurekubedbcom-providerconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/azurekubedbcom-providerconfig-editor --version=v0.24.0 +$ helm upgrade -i azurekubedbcom-providerconfig-editor appscode/azurekubedbcom-providerconfig-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProviderConfig Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `azurekubedbcom-providerconfig-editor`: ```bash -$ helm upgrade -i azurekubedbcom-providerconfig-editor appscode/azurekubedbcom-providerconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i azurekubedbcom-providerconfig-editor appscode/azurekubedbcom-providerconfig-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProviderConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `azurekubedbcom-pro Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i azurekubedbcom-providerconfig-editor appscode/azurekubedbcom-providerconfig-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=azure.kubedb.com/v1beta1 +$ helm upgrade -i azurekubedbcom-providerconfig-editor appscode/azurekubedbcom-providerconfig-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=azure.kubedb.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i azurekubedbcom-providerconfig-editor appscode/azurekubedbcom-providerconfig-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i azurekubedbcom-providerconfig-editor appscode/azurekubedbcom-providerconfig-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/azurekubedbcom-providerconfigusage-editor/Chart.yaml b/charts/azurekubedbcom-providerconfigusage-editor/Chart.yaml index 6d6935ae0c..5bee77a71a 100644 --- a/charts/azurekubedbcom-providerconfigusage-editor/Chart.yaml +++ b/charts/azurekubedbcom-providerconfigusage-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"azure.kubedb.com","version":"v1beta1","resource":"providerconfigusages"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProviderConfigUsage Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: azurekubedbcom-providerconfigusage-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/azurekubedbcom-providerconfigusage-editor/README.md b/charts/azurekubedbcom-providerconfigusage-editor/README.md index 89bb17fed3..05ad11a632 100644 --- a/charts/azurekubedbcom-providerconfigusage-editor/README.md +++ b/charts/azurekubedbcom-providerconfigusage-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/azurekubedbcom-providerconfigusage-editor --version=v0.23.0 -$ helm upgrade -i azurekubedbcom-providerconfigusage-editor appscode/azurekubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/azurekubedbcom-providerconfigusage-editor --version=v0.24.0 +$ helm upgrade -i azurekubedbcom-providerconfigusage-editor appscode/azurekubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProviderConfigUsage Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `azurekubedbcom-providerconfigusage-editor`: ```bash -$ helm upgrade -i azurekubedbcom-providerconfigusage-editor appscode/azurekubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i azurekubedbcom-providerconfigusage-editor appscode/azurekubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProviderConfigUsage Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `azurekubedbcom-pro Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i azurekubedbcom-providerconfigusage-editor appscode/azurekubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=azure.kubedb.com/v1beta1 +$ helm upgrade -i azurekubedbcom-providerconfigusage-editor appscode/azurekubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=azure.kubedb.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i azurekubedbcom-providerconfigusage-editor appscode/azurekubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i azurekubedbcom-providerconfigusage-editor appscode/azurekubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/azurekubedbcom-providerregistration-editor/Chart.yaml b/charts/azurekubedbcom-providerregistration-editor/Chart.yaml index d923a5a314..8d554e8f8f 100644 --- a/charts/azurekubedbcom-providerregistration-editor/Chart.yaml +++ b/charts/azurekubedbcom-providerregistration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"azure.kubedb.com","version":"v1alpha1","resource":"providerregistrations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProviderRegistration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: azurekubedbcom-providerregistration-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/azurekubedbcom-providerregistration-editor/README.md b/charts/azurekubedbcom-providerregistration-editor/README.md index 8a5706b954..3ec69ddbea 100644 --- a/charts/azurekubedbcom-providerregistration-editor/README.md +++ b/charts/azurekubedbcom-providerregistration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/azurekubedbcom-providerregistration-editor --version=v0.23.0 -$ helm upgrade -i azurekubedbcom-providerregistration-editor appscode/azurekubedbcom-providerregistration-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/azurekubedbcom-providerregistration-editor --version=v0.24.0 +$ helm upgrade -i azurekubedbcom-providerregistration-editor appscode/azurekubedbcom-providerregistration-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProviderRegistration Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `azurekubedbcom-providerregistration-editor`: ```bash -$ helm upgrade -i azurekubedbcom-providerregistration-editor appscode/azurekubedbcom-providerregistration-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i azurekubedbcom-providerregistration-editor appscode/azurekubedbcom-providerregistration-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProviderRegistration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `azurekubedbcom-pro Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i azurekubedbcom-providerregistration-editor appscode/azurekubedbcom-providerregistration-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=azure.kubedb.com/v1alpha1 +$ helm upgrade -i azurekubedbcom-providerregistration-editor appscode/azurekubedbcom-providerregistration-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i azurekubedbcom-providerregistration-editor appscode/azurekubedbcom-providerregistration-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i azurekubedbcom-providerregistration-editor appscode/azurekubedbcom-providerregistration-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/azurekubedbcom-resourcegroup-editor/Chart.yaml b/charts/azurekubedbcom-resourcegroup-editor/Chart.yaml index 85b4494516..a92b2a9e54 100644 --- a/charts/azurekubedbcom-resourcegroup-editor/Chart.yaml +++ b/charts/azurekubedbcom-resourcegroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"azure.kubedb.com","version":"v1alpha1","resource":"resourcegroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: azurekubedbcom-resourcegroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/azurekubedbcom-resourcegroup-editor/README.md b/charts/azurekubedbcom-resourcegroup-editor/README.md index 80d5401fd9..57f6e5702f 100644 --- a/charts/azurekubedbcom-resourcegroup-editor/README.md +++ b/charts/azurekubedbcom-resourcegroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/azurekubedbcom-resourcegroup-editor --version=v0.23.0 -$ helm upgrade -i azurekubedbcom-resourcegroup-editor appscode/azurekubedbcom-resourcegroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/azurekubedbcom-resourcegroup-editor --version=v0.24.0 +$ helm upgrade -i azurekubedbcom-resourcegroup-editor appscode/azurekubedbcom-resourcegroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceGroup Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `azurekubedbcom-resourcegroup-editor`: ```bash -$ helm upgrade -i azurekubedbcom-resourcegroup-editor appscode/azurekubedbcom-resourcegroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i azurekubedbcom-resourcegroup-editor appscode/azurekubedbcom-resourcegroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `azurekubedbcom-res Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i azurekubedbcom-resourcegroup-editor appscode/azurekubedbcom-resourcegroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=azure.kubedb.com/v1alpha1 +$ helm upgrade -i azurekubedbcom-resourcegroup-editor appscode/azurekubedbcom-resourcegroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i azurekubedbcom-resourcegroup-editor appscode/azurekubedbcom-resourcegroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i azurekubedbcom-resourcegroup-editor appscode/azurekubedbcom-resourcegroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/azurekubedbcom-storeconfig-editor/Chart.yaml b/charts/azurekubedbcom-storeconfig-editor/Chart.yaml index b35d1e7d4b..b966c5e560 100644 --- a/charts/azurekubedbcom-storeconfig-editor/Chart.yaml +++ b/charts/azurekubedbcom-storeconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"azure.kubedb.com","version":"v1alpha1","resource":"storeconfigs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: StoreConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: azurekubedbcom-storeconfig-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/azurekubedbcom-storeconfig-editor/README.md b/charts/azurekubedbcom-storeconfig-editor/README.md index a6e9ec0265..ff47884f40 100644 --- a/charts/azurekubedbcom-storeconfig-editor/README.md +++ b/charts/azurekubedbcom-storeconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/azurekubedbcom-storeconfig-editor --version=v0.23.0 -$ helm upgrade -i azurekubedbcom-storeconfig-editor appscode/azurekubedbcom-storeconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/azurekubedbcom-storeconfig-editor --version=v0.24.0 +$ helm upgrade -i azurekubedbcom-storeconfig-editor appscode/azurekubedbcom-storeconfig-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a StoreConfig Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `azurekubedbcom-storeconfig-editor`: ```bash -$ helm upgrade -i azurekubedbcom-storeconfig-editor appscode/azurekubedbcom-storeconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i azurekubedbcom-storeconfig-editor appscode/azurekubedbcom-storeconfig-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a StoreConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `azurekubedbcom-sto Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i azurekubedbcom-storeconfig-editor appscode/azurekubedbcom-storeconfig-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=azure.kubedb.com/v1alpha1 +$ helm upgrade -i azurekubedbcom-storeconfig-editor appscode/azurekubedbcom-storeconfig-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i azurekubedbcom-storeconfig-editor appscode/azurekubedbcom-storeconfig-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i azurekubedbcom-storeconfig-editor appscode/azurekubedbcom-storeconfig-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/azurekubedbcom-subscription-editor/Chart.yaml b/charts/azurekubedbcom-subscription-editor/Chart.yaml index 70028f28a4..f463db9e79 100644 --- a/charts/azurekubedbcom-subscription-editor/Chart.yaml +++ b/charts/azurekubedbcom-subscription-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"azure.kubedb.com","version":"v1alpha1","resource":"subscriptions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Subscription Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: azurekubedbcom-subscription-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/azurekubedbcom-subscription-editor/README.md b/charts/azurekubedbcom-subscription-editor/README.md index 2ae6b63ef1..25d3f52305 100644 --- a/charts/azurekubedbcom-subscription-editor/README.md +++ b/charts/azurekubedbcom-subscription-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/azurekubedbcom-subscription-editor --version=v0.23.0 -$ helm upgrade -i azurekubedbcom-subscription-editor appscode/azurekubedbcom-subscription-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/azurekubedbcom-subscription-editor --version=v0.24.0 +$ helm upgrade -i azurekubedbcom-subscription-editor appscode/azurekubedbcom-subscription-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Subscription Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `azurekubedbcom-subscription-editor`: ```bash -$ helm upgrade -i azurekubedbcom-subscription-editor appscode/azurekubedbcom-subscription-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i azurekubedbcom-subscription-editor appscode/azurekubedbcom-subscription-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Subscription Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `azurekubedbcom-sub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i azurekubedbcom-subscription-editor appscode/azurekubedbcom-subscription-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=azure.kubedb.com/v1alpha1 +$ helm upgrade -i azurekubedbcom-subscription-editor appscode/azurekubedbcom-subscription-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i azurekubedbcom-subscription-editor appscode/azurekubedbcom-subscription-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i azurekubedbcom-subscription-editor appscode/azurekubedbcom-subscription-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/batch-cronjob-editor/Chart.yaml b/charts/batch-cronjob-editor/Chart.yaml index 2937292bed..43b17e620c 100644 --- a/charts/batch-cronjob-editor/Chart.yaml +++ b/charts/batch-cronjob-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"batch","version":"v1","resource":"cronjobs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: CronJob Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: batch-cronjob-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/batch-cronjob-editor/README.md b/charts/batch-cronjob-editor/README.md index f522f7107c..69ec4378ab 100644 --- a/charts/batch-cronjob-editor/README.md +++ b/charts/batch-cronjob-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/batch-cronjob-editor --version=v0.23.0 -$ helm upgrade -i batch-cronjob-editor appscode/batch-cronjob-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/batch-cronjob-editor --version=v0.24.0 +$ helm upgrade -i batch-cronjob-editor appscode/batch-cronjob-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CronJob Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `batch-cronjob-editor`: ```bash -$ helm upgrade -i batch-cronjob-editor appscode/batch-cronjob-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i batch-cronjob-editor appscode/batch-cronjob-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a CronJob Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `batch-cronjob-edit Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i batch-cronjob-editor appscode/batch-cronjob-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=batch/v1 +$ helm upgrade -i batch-cronjob-editor appscode/batch-cronjob-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=batch/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i batch-cronjob-editor appscode/batch-cronjob-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i batch-cronjob-editor appscode/batch-cronjob-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/batch-job-editor/Chart.yaml b/charts/batch-job-editor/Chart.yaml index f095d59512..f57331a134 100644 --- a/charts/batch-job-editor/Chart.yaml +++ b/charts/batch-job-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"batch","version":"v1","resource":"jobs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Job Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: batch-job-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/batch-job-editor/README.md b/charts/batch-job-editor/README.md index 1a3d4a2c1a..5f0276fd09 100644 --- a/charts/batch-job-editor/README.md +++ b/charts/batch-job-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/batch-job-editor --version=v0.23.0 -$ helm upgrade -i batch-job-editor appscode/batch-job-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/batch-job-editor --version=v0.24.0 +$ helm upgrade -i batch-job-editor appscode/batch-job-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Job Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `batch-job-editor`: ```bash -$ helm upgrade -i batch-job-editor appscode/batch-job-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i batch-job-editor appscode/batch-job-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Job Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `batch-job-editor` Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i batch-job-editor appscode/batch-job-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=batch/v1 +$ helm upgrade -i batch-job-editor appscode/batch-job-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=batch/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i batch-job-editor appscode/batch-job-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i batch-job-editor appscode/batch-job-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/batch-jobtemplate-editor/Chart.yaml b/charts/batch-jobtemplate-editor/Chart.yaml index 96197eb7fd..9686c7f462 100644 --- a/charts/batch-jobtemplate-editor/Chart.yaml +++ b/charts/batch-jobtemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"batch","version":"v1beta1","resource":"jobtemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: JobTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: batch-jobtemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/batch-jobtemplate-editor/README.md b/charts/batch-jobtemplate-editor/README.md index 57e1af4460..bd18531344 100644 --- a/charts/batch-jobtemplate-editor/README.md +++ b/charts/batch-jobtemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/batch-jobtemplate-editor --version=v0.23.0 -$ helm upgrade -i batch-jobtemplate-editor appscode/batch-jobtemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/batch-jobtemplate-editor --version=v0.24.0 +$ helm upgrade -i batch-jobtemplate-editor appscode/batch-jobtemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a JobTemplate Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `batch-jobtemplate-editor`: ```bash -$ helm upgrade -i batch-jobtemplate-editor appscode/batch-jobtemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i batch-jobtemplate-editor appscode/batch-jobtemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a JobTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `batch-jobtemplate- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i batch-jobtemplate-editor appscode/batch-jobtemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=batch/v1beta1 +$ helm upgrade -i batch-jobtemplate-editor appscode/batch-jobtemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=batch/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i batch-jobtemplate-editor appscode/batch-jobtemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i batch-jobtemplate-editor appscode/batch-jobtemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/batchk8sappscodecom-pendingtask-editor/Chart.yaml b/charts/batchk8sappscodecom-pendingtask-editor/Chart.yaml index f6ab5d37e3..97707a79e3 100644 --- a/charts/batchk8sappscodecom-pendingtask-editor/Chart.yaml +++ b/charts/batchk8sappscodecom-pendingtask-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"batch.k8s.appscode.com","version":"v1alpha1","resource":"pendingtasks"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PendingTask Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: batchk8sappscodecom-pendingtask-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/batchk8sappscodecom-pendingtask-editor/README.md b/charts/batchk8sappscodecom-pendingtask-editor/README.md index f56b5dd596..86c1338065 100644 --- a/charts/batchk8sappscodecom-pendingtask-editor/README.md +++ b/charts/batchk8sappscodecom-pendingtask-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/batchk8sappscodecom-pendingtask-editor --version=v0.23.0 -$ helm upgrade -i batchk8sappscodecom-pendingtask-editor appscode/batchk8sappscodecom-pendingtask-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/batchk8sappscodecom-pendingtask-editor --version=v0.24.0 +$ helm upgrade -i batchk8sappscodecom-pendingtask-editor appscode/batchk8sappscodecom-pendingtask-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PendingTask Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `batchk8sappscodecom-pendingtask-editor`: ```bash -$ helm upgrade -i batchk8sappscodecom-pendingtask-editor appscode/batchk8sappscodecom-pendingtask-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i batchk8sappscodecom-pendingtask-editor appscode/batchk8sappscodecom-pendingtask-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PendingTask Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `batchk8sappscodeco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i batchk8sappscodecom-pendingtask-editor appscode/batchk8sappscodecom-pendingtask-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=batch.k8s.appscode.com/v1alpha1 +$ helm upgrade -i batchk8sappscodecom-pendingtask-editor appscode/batchk8sappscodecom-pendingtask-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=batch.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i batchk8sappscodecom-pendingtask-editor appscode/batchk8sappscodecom-pendingtask-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i batchk8sappscodecom-pendingtask-editor appscode/batchk8sappscodecom-pendingtask-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/batchk8sappscodecom-taskqueue-editor/Chart.yaml b/charts/batchk8sappscodecom-taskqueue-editor/Chart.yaml index 37bfa35a45..bb271a08ca 100644 --- a/charts/batchk8sappscodecom-taskqueue-editor/Chart.yaml +++ b/charts/batchk8sappscodecom-taskqueue-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"batch.k8s.appscode.com","version":"v1alpha1","resource":"taskqueues"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: TaskQueue Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: batchk8sappscodecom-taskqueue-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/batchk8sappscodecom-taskqueue-editor/README.md b/charts/batchk8sappscodecom-taskqueue-editor/README.md index e1adc8ede1..65a00b6801 100644 --- a/charts/batchk8sappscodecom-taskqueue-editor/README.md +++ b/charts/batchk8sappscodecom-taskqueue-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/batchk8sappscodecom-taskqueue-editor --version=v0.23.0 -$ helm upgrade -i batchk8sappscodecom-taskqueue-editor appscode/batchk8sappscodecom-taskqueue-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/batchk8sappscodecom-taskqueue-editor --version=v0.24.0 +$ helm upgrade -i batchk8sappscodecom-taskqueue-editor appscode/batchk8sappscodecom-taskqueue-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a TaskQueue Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `batchk8sappscodecom-taskqueue-editor`: ```bash -$ helm upgrade -i batchk8sappscodecom-taskqueue-editor appscode/batchk8sappscodecom-taskqueue-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i batchk8sappscodecom-taskqueue-editor appscode/batchk8sappscodecom-taskqueue-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a TaskQueue Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `batchk8sappscodeco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i batchk8sappscodecom-taskqueue-editor appscode/batchk8sappscodecom-taskqueue-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=batch.k8s.appscode.com/v1alpha1 +$ helm upgrade -i batchk8sappscodecom-taskqueue-editor appscode/batchk8sappscodecom-taskqueue-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=batch.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i batchk8sappscodecom-taskqueue-editor appscode/batchk8sappscodecom-taskqueue-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i batchk8sappscodecom-taskqueue-editor appscode/batchk8sappscodecom-taskqueue-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/bootstrapclusterxk8sio-eksconfig-editor/Chart.yaml b/charts/bootstrapclusterxk8sio-eksconfig-editor/Chart.yaml index e420ef6c20..0d9c43a2b5 100644 --- a/charts/bootstrapclusterxk8sio-eksconfig-editor/Chart.yaml +++ b/charts/bootstrapclusterxk8sio-eksconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"bootstrap.cluster.x-k8s.io","version":"v1beta2","resource":"eksconfigs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: EKSConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: bootstrapclusterxk8sio-eksconfig-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/bootstrapclusterxk8sio-eksconfig-editor/README.md b/charts/bootstrapclusterxk8sio-eksconfig-editor/README.md index b95ce8829b..905e564914 100644 --- a/charts/bootstrapclusterxk8sio-eksconfig-editor/README.md +++ b/charts/bootstrapclusterxk8sio-eksconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/bootstrapclusterxk8sio-eksconfig-editor --version=v0.23.0 -$ helm upgrade -i bootstrapclusterxk8sio-eksconfig-editor appscode/bootstrapclusterxk8sio-eksconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/bootstrapclusterxk8sio-eksconfig-editor --version=v0.24.0 +$ helm upgrade -i bootstrapclusterxk8sio-eksconfig-editor appscode/bootstrapclusterxk8sio-eksconfig-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EKSConfig Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `bootstrapclusterxk8sio-eksconfig-editor`: ```bash -$ helm upgrade -i bootstrapclusterxk8sio-eksconfig-editor appscode/bootstrapclusterxk8sio-eksconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i bootstrapclusterxk8sio-eksconfig-editor appscode/bootstrapclusterxk8sio-eksconfig-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a EKSConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `bootstrapclusterxk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i bootstrapclusterxk8sio-eksconfig-editor appscode/bootstrapclusterxk8sio-eksconfig-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=bootstrap.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i bootstrapclusterxk8sio-eksconfig-editor appscode/bootstrapclusterxk8sio-eksconfig-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=bootstrap.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i bootstrapclusterxk8sio-eksconfig-editor appscode/bootstrapclusterxk8sio-eksconfig-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i bootstrapclusterxk8sio-eksconfig-editor appscode/bootstrapclusterxk8sio-eksconfig-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/bootstrapclusterxk8sio-eksconfigtemplate-editor/Chart.yaml b/charts/bootstrapclusterxk8sio-eksconfigtemplate-editor/Chart.yaml index 68d350a59e..3e05056286 100644 --- a/charts/bootstrapclusterxk8sio-eksconfigtemplate-editor/Chart.yaml +++ b/charts/bootstrapclusterxk8sio-eksconfigtemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"bootstrap.cluster.x-k8s.io","version":"v1beta2","resource":"eksconfigtemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: EKSConfigTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: bootstrapclusterxk8sio-eksconfigtemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/bootstrapclusterxk8sio-eksconfigtemplate-editor/README.md b/charts/bootstrapclusterxk8sio-eksconfigtemplate-editor/README.md index 2dfe380e0e..6e0d4c31f2 100644 --- a/charts/bootstrapclusterxk8sio-eksconfigtemplate-editor/README.md +++ b/charts/bootstrapclusterxk8sio-eksconfigtemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor --version=v0.23.0 -$ helm upgrade -i bootstrapclusterxk8sio-eksconfigtemplate-editor appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor --version=v0.24.0 +$ helm upgrade -i bootstrapclusterxk8sio-eksconfigtemplate-editor appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EKSConfigTemplate Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `bootstrapclusterxk8sio-eksconfigtemplate-editor`: ```bash -$ helm upgrade -i bootstrapclusterxk8sio-eksconfigtemplate-editor appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i bootstrapclusterxk8sio-eksconfigtemplate-editor appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a EKSConfigTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `bootstrapclusterxk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i bootstrapclusterxk8sio-eksconfigtemplate-editor appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=bootstrap.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i bootstrapclusterxk8sio-eksconfigtemplate-editor appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=bootstrap.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i bootstrapclusterxk8sio-eksconfigtemplate-editor appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i bootstrapclusterxk8sio-eksconfigtemplate-editor appscode/bootstrapclusterxk8sio-eksconfigtemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cacheazurekubedbcom-rediscache-editor/Chart.yaml b/charts/cacheazurekubedbcom-rediscache-editor/Chart.yaml index d393220c4e..cf858960ef 100644 --- a/charts/cacheazurekubedbcom-rediscache-editor/Chart.yaml +++ b/charts/cacheazurekubedbcom-rediscache-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cache.azure.kubedb.com","version":"v1alpha1","resource":"rediscaches"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisCache Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cacheazurekubedbcom-rediscache-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cacheazurekubedbcom-rediscache-editor/README.md b/charts/cacheazurekubedbcom-rediscache-editor/README.md index c99291c4f3..e58318b49f 100644 --- a/charts/cacheazurekubedbcom-rediscache-editor/README.md +++ b/charts/cacheazurekubedbcom-rediscache-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cacheazurekubedbcom-rediscache-editor --version=v0.23.0 -$ helm upgrade -i cacheazurekubedbcom-rediscache-editor appscode/cacheazurekubedbcom-rediscache-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cacheazurekubedbcom-rediscache-editor --version=v0.24.0 +$ helm upgrade -i cacheazurekubedbcom-rediscache-editor appscode/cacheazurekubedbcom-rediscache-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisCache Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `cacheazurekubedbcom-rediscache-editor`: ```bash -$ helm upgrade -i cacheazurekubedbcom-rediscache-editor appscode/cacheazurekubedbcom-rediscache-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cacheazurekubedbcom-rediscache-editor appscode/cacheazurekubedbcom-rediscache-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisCache Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cacheazurekubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-rediscache-editor appscode/cacheazurekubedbcom-rediscache-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cacheazurekubedbcom-rediscache-editor appscode/cacheazurekubedbcom-rediscache-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-rediscache-editor appscode/cacheazurekubedbcom-rediscache-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cacheazurekubedbcom-rediscache-editor appscode/cacheazurekubedbcom-rediscache-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cacheazurekubedbcom-redisenterprisecluster-editor/Chart.yaml b/charts/cacheazurekubedbcom-redisenterprisecluster-editor/Chart.yaml index 5e7b4b9d41..554746a98b 100644 --- a/charts/cacheazurekubedbcom-redisenterprisecluster-editor/Chart.yaml +++ b/charts/cacheazurekubedbcom-redisenterprisecluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cache.azure.kubedb.com","version":"v1alpha1","resource":"redisenterpriseclusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisEnterpriseCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cacheazurekubedbcom-redisenterprisecluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cacheazurekubedbcom-redisenterprisecluster-editor/README.md b/charts/cacheazurekubedbcom-redisenterprisecluster-editor/README.md index e00a924914..8d6bb860d2 100644 --- a/charts/cacheazurekubedbcom-redisenterprisecluster-editor/README.md +++ b/charts/cacheazurekubedbcom-redisenterprisecluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cacheazurekubedbcom-redisenterprisecluster-editor --version=v0.23.0 -$ helm upgrade -i cacheazurekubedbcom-redisenterprisecluster-editor appscode/cacheazurekubedbcom-redisenterprisecluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cacheazurekubedbcom-redisenterprisecluster-editor --version=v0.24.0 +$ helm upgrade -i cacheazurekubedbcom-redisenterprisecluster-editor appscode/cacheazurekubedbcom-redisenterprisecluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisEnterpriseCluster Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `cacheazurekubedbcom-redisenterprisecluster-editor`: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisenterprisecluster-editor appscode/cacheazurekubedbcom-redisenterprisecluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cacheazurekubedbcom-redisenterprisecluster-editor appscode/cacheazurekubedbcom-redisenterprisecluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisEnterpriseCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cacheazurekubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisenterprisecluster-editor appscode/cacheazurekubedbcom-redisenterprisecluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cacheazurekubedbcom-redisenterprisecluster-editor appscode/cacheazurekubedbcom-redisenterprisecluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisenterprisecluster-editor appscode/cacheazurekubedbcom-redisenterprisecluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cacheazurekubedbcom-redisenterprisecluster-editor appscode/cacheazurekubedbcom-redisenterprisecluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cacheazurekubedbcom-redisenterprisedatabase-editor/Chart.yaml b/charts/cacheazurekubedbcom-redisenterprisedatabase-editor/Chart.yaml index 3b90554ce8..745aaa0d5b 100644 --- a/charts/cacheazurekubedbcom-redisenterprisedatabase-editor/Chart.yaml +++ b/charts/cacheazurekubedbcom-redisenterprisedatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cache.azure.kubedb.com","version":"v1alpha1","resource":"redisenterprisedatabases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisEnterpriseDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cacheazurekubedbcom-redisenterprisedatabase-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cacheazurekubedbcom-redisenterprisedatabase-editor/README.md b/charts/cacheazurekubedbcom-redisenterprisedatabase-editor/README.md index cecaaabcdd..f8693315ab 100644 --- a/charts/cacheazurekubedbcom-redisenterprisedatabase-editor/README.md +++ b/charts/cacheazurekubedbcom-redisenterprisedatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cacheazurekubedbcom-redisenterprisedatabase-editor --version=v0.23.0 -$ helm upgrade -i cacheazurekubedbcom-redisenterprisedatabase-editor appscode/cacheazurekubedbcom-redisenterprisedatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cacheazurekubedbcom-redisenterprisedatabase-editor --version=v0.24.0 +$ helm upgrade -i cacheazurekubedbcom-redisenterprisedatabase-editor appscode/cacheazurekubedbcom-redisenterprisedatabase-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisEnterpriseDatabase Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `cacheazurekubedbcom-redisenterprisedatabase-editor`: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisenterprisedatabase-editor appscode/cacheazurekubedbcom-redisenterprisedatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cacheazurekubedbcom-redisenterprisedatabase-editor appscode/cacheazurekubedbcom-redisenterprisedatabase-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisEnterpriseDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cacheazurekubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisenterprisedatabase-editor appscode/cacheazurekubedbcom-redisenterprisedatabase-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cacheazurekubedbcom-redisenterprisedatabase-editor appscode/cacheazurekubedbcom-redisenterprisedatabase-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisenterprisedatabase-editor appscode/cacheazurekubedbcom-redisenterprisedatabase-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cacheazurekubedbcom-redisenterprisedatabase-editor appscode/cacheazurekubedbcom-redisenterprisedatabase-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cacheazurekubedbcom-redisfirewallrule-editor/Chart.yaml b/charts/cacheazurekubedbcom-redisfirewallrule-editor/Chart.yaml index 45e417d2f5..609df589c4 100644 --- a/charts/cacheazurekubedbcom-redisfirewallrule-editor/Chart.yaml +++ b/charts/cacheazurekubedbcom-redisfirewallrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cache.azure.kubedb.com","version":"v1alpha1","resource":"redisfirewallrules"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisFirewallRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cacheazurekubedbcom-redisfirewallrule-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cacheazurekubedbcom-redisfirewallrule-editor/README.md b/charts/cacheazurekubedbcom-redisfirewallrule-editor/README.md index b5a3df4447..8b0eadd0fc 100644 --- a/charts/cacheazurekubedbcom-redisfirewallrule-editor/README.md +++ b/charts/cacheazurekubedbcom-redisfirewallrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cacheazurekubedbcom-redisfirewallrule-editor --version=v0.23.0 -$ helm upgrade -i cacheazurekubedbcom-redisfirewallrule-editor appscode/cacheazurekubedbcom-redisfirewallrule-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cacheazurekubedbcom-redisfirewallrule-editor --version=v0.24.0 +$ helm upgrade -i cacheazurekubedbcom-redisfirewallrule-editor appscode/cacheazurekubedbcom-redisfirewallrule-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisFirewallRule Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `cacheazurekubedbcom-redisfirewallrule-editor`: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisfirewallrule-editor appscode/cacheazurekubedbcom-redisfirewallrule-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cacheazurekubedbcom-redisfirewallrule-editor appscode/cacheazurekubedbcom-redisfirewallrule-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisFirewallRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cacheazurekubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisfirewallrule-editor appscode/cacheazurekubedbcom-redisfirewallrule-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cacheazurekubedbcom-redisfirewallrule-editor appscode/cacheazurekubedbcom-redisfirewallrule-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-redisfirewallrule-editor appscode/cacheazurekubedbcom-redisfirewallrule-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cacheazurekubedbcom-redisfirewallrule-editor appscode/cacheazurekubedbcom-redisfirewallrule-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cacheazurekubedbcom-redislinkedserver-editor/Chart.yaml b/charts/cacheazurekubedbcom-redislinkedserver-editor/Chart.yaml index 6c7a2262c5..4af195939b 100644 --- a/charts/cacheazurekubedbcom-redislinkedserver-editor/Chart.yaml +++ b/charts/cacheazurekubedbcom-redislinkedserver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cache.azure.kubedb.com","version":"v1alpha1","resource":"redislinkedservers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisLinkedServer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cacheazurekubedbcom-redislinkedserver-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cacheazurekubedbcom-redislinkedserver-editor/README.md b/charts/cacheazurekubedbcom-redislinkedserver-editor/README.md index 8ea16b7509..09da2a4d75 100644 --- a/charts/cacheazurekubedbcom-redislinkedserver-editor/README.md +++ b/charts/cacheazurekubedbcom-redislinkedserver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cacheazurekubedbcom-redislinkedserver-editor --version=v0.23.0 -$ helm upgrade -i cacheazurekubedbcom-redislinkedserver-editor appscode/cacheazurekubedbcom-redislinkedserver-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cacheazurekubedbcom-redislinkedserver-editor --version=v0.24.0 +$ helm upgrade -i cacheazurekubedbcom-redislinkedserver-editor appscode/cacheazurekubedbcom-redislinkedserver-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisLinkedServer Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `cacheazurekubedbcom-redislinkedserver-editor`: ```bash -$ helm upgrade -i cacheazurekubedbcom-redislinkedserver-editor appscode/cacheazurekubedbcom-redislinkedserver-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cacheazurekubedbcom-redislinkedserver-editor appscode/cacheazurekubedbcom-redislinkedserver-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisLinkedServer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cacheazurekubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-redislinkedserver-editor appscode/cacheazurekubedbcom-redislinkedserver-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cacheazurekubedbcom-redislinkedserver-editor appscode/cacheazurekubedbcom-redislinkedserver-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cache.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cacheazurekubedbcom-redislinkedserver-editor appscode/cacheazurekubedbcom-redislinkedserver-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cacheazurekubedbcom-redislinkedserver-editor appscode/cacheazurekubedbcom-redislinkedserver-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-clickhousebinding-editor/Chart.yaml b/charts/catalogappscodecom-clickhousebinding-editor/Chart.yaml index 8ff6ed3314..22cea658e4 100644 --- a/charts/catalogappscodecom-clickhousebinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-clickhousebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"clickhousebindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClickHouseBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-clickhousebinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-clickhousebinding-editor/README.md b/charts/catalogappscodecom-clickhousebinding-editor/README.md index b95596128b..ab689d6128 100644 --- a/charts/catalogappscodecom-clickhousebinding-editor/README.md +++ b/charts/catalogappscodecom-clickhousebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-clickhousebinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-clickhousebinding-editor appscode/catalogappscodecom-clickhousebinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-clickhousebinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-clickhousebinding-editor appscode/catalogappscodecom-clickhousebinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClickHouseBinding Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `catalogappscodecom-clickhousebinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-clickhousebinding-editor appscode/catalogappscodecom-clickhousebinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-clickhousebinding-editor appscode/catalogappscodecom-clickhousebinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClickHouseBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-clickhousebinding-editor appscode/catalogappscodecom-clickhousebinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-clickhousebinding-editor appscode/catalogappscodecom-clickhousebinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-clickhousebinding-editor appscode/catalogappscodecom-clickhousebinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-clickhousebinding-editor appscode/catalogappscodecom-clickhousebinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-druidbinding-editor/Chart.yaml b/charts/catalogappscodecom-druidbinding-editor/Chart.yaml index a9267df795..51e7c1bd63 100644 --- a/charts/catalogappscodecom-druidbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-druidbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"druidbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: DruidBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-druidbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-druidbinding-editor/README.md b/charts/catalogappscodecom-druidbinding-editor/README.md index b97e8ad062..4a99a479de 100644 --- a/charts/catalogappscodecom-druidbinding-editor/README.md +++ b/charts/catalogappscodecom-druidbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-druidbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-druidbinding-editor appscode/catalogappscodecom-druidbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-druidbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-druidbinding-editor appscode/catalogappscodecom-druidbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DruidBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogappscodecom-druidbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-druidbinding-editor appscode/catalogappscodecom-druidbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-druidbinding-editor appscode/catalogappscodecom-druidbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a DruidBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-druidbinding-editor appscode/catalogappscodecom-druidbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-druidbinding-editor appscode/catalogappscodecom-druidbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-druidbinding-editor appscode/catalogappscodecom-druidbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-druidbinding-editor appscode/catalogappscodecom-druidbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-elasticsearchbinding-editor/Chart.yaml b/charts/catalogappscodecom-elasticsearchbinding-editor/Chart.yaml index 76d08fea24..db81fe999e 100644 --- a/charts/catalogappscodecom-elasticsearchbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-elasticsearchbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"elasticsearchbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ElasticsearchBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-elasticsearchbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-elasticsearchbinding-editor/README.md b/charts/catalogappscodecom-elasticsearchbinding-editor/README.md index 7a9cac6f1c..0dde849a74 100644 --- a/charts/catalogappscodecom-elasticsearchbinding-editor/README.md +++ b/charts/catalogappscodecom-elasticsearchbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-elasticsearchbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-elasticsearchbinding-editor appscode/catalogappscodecom-elasticsearchbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-elasticsearchbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-elasticsearchbinding-editor appscode/catalogappscodecom-elasticsearchbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchBinding Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `catalogappscodecom-elasticsearchbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-elasticsearchbinding-editor appscode/catalogappscodecom-elasticsearchbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-elasticsearchbinding-editor appscode/catalogappscodecom-elasticsearchbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ElasticsearchBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-elasticsearchbinding-editor appscode/catalogappscodecom-elasticsearchbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-elasticsearchbinding-editor appscode/catalogappscodecom-elasticsearchbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-elasticsearchbinding-editor appscode/catalogappscodecom-elasticsearchbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-elasticsearchbinding-editor appscode/catalogappscodecom-elasticsearchbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-ferretdbbinding-editor/Chart.yaml b/charts/catalogappscodecom-ferretdbbinding-editor/Chart.yaml index 59c9722150..523cdb0f55 100644 --- a/charts/catalogappscodecom-ferretdbbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-ferretdbbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"ferretdbbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FerretDBBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-ferretdbbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-ferretdbbinding-editor/README.md b/charts/catalogappscodecom-ferretdbbinding-editor/README.md index c5cb0ffa30..822b5bc170 100644 --- a/charts/catalogappscodecom-ferretdbbinding-editor/README.md +++ b/charts/catalogappscodecom-ferretdbbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-ferretdbbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-ferretdbbinding-editor appscode/catalogappscodecom-ferretdbbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-ferretdbbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-ferretdbbinding-editor appscode/catalogappscodecom-ferretdbbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FerretDBBinding Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogappscodecom-ferretdbbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-ferretdbbinding-editor appscode/catalogappscodecom-ferretdbbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-ferretdbbinding-editor appscode/catalogappscodecom-ferretdbbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FerretDBBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-ferretdbbinding-editor appscode/catalogappscodecom-ferretdbbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-ferretdbbinding-editor appscode/catalogappscodecom-ferretdbbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-ferretdbbinding-editor appscode/catalogappscodecom-ferretdbbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-ferretdbbinding-editor appscode/catalogappscodecom-ferretdbbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-kafkabinding-editor/Chart.yaml b/charts/catalogappscodecom-kafkabinding-editor/Chart.yaml index 81cbf04208..bec372396b 100644 --- a/charts/catalogappscodecom-kafkabinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-kafkabinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"kafkabindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: KafkaBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-kafkabinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-kafkabinding-editor/README.md b/charts/catalogappscodecom-kafkabinding-editor/README.md index 4e130aa481..0d80f45529 100644 --- a/charts/catalogappscodecom-kafkabinding-editor/README.md +++ b/charts/catalogappscodecom-kafkabinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-kafkabinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-kafkabinding-editor appscode/catalogappscodecom-kafkabinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-kafkabinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-kafkabinding-editor appscode/catalogappscodecom-kafkabinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KafkaBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogappscodecom-kafkabinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-kafkabinding-editor appscode/catalogappscodecom-kafkabinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-kafkabinding-editor appscode/catalogappscodecom-kafkabinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a KafkaBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-kafkabinding-editor appscode/catalogappscodecom-kafkabinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-kafkabinding-editor appscode/catalogappscodecom-kafkabinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-kafkabinding-editor appscode/catalogappscodecom-kafkabinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-kafkabinding-editor appscode/catalogappscodecom-kafkabinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-mariadbbinding-editor/Chart.yaml b/charts/catalogappscodecom-mariadbbinding-editor/Chart.yaml index c1efed330d..91030acb8d 100644 --- a/charts/catalogappscodecom-mariadbbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-mariadbbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"mariadbbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MariaDBBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-mariadbbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-mariadbbinding-editor/README.md b/charts/catalogappscodecom-mariadbbinding-editor/README.md index cea6101bee..67bd850200 100644 --- a/charts/catalogappscodecom-mariadbbinding-editor/README.md +++ b/charts/catalogappscodecom-mariadbbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-mariadbbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-mariadbbinding-editor appscode/catalogappscodecom-mariadbbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-mariadbbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-mariadbbinding-editor appscode/catalogappscodecom-mariadbbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBBinding Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `catalogappscodecom-mariadbbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-mariadbbinding-editor appscode/catalogappscodecom-mariadbbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-mariadbbinding-editor appscode/catalogappscodecom-mariadbbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MariaDBBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-mariadbbinding-editor appscode/catalogappscodecom-mariadbbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-mariadbbinding-editor appscode/catalogappscodecom-mariadbbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-mariadbbinding-editor appscode/catalogappscodecom-mariadbbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-mariadbbinding-editor appscode/catalogappscodecom-mariadbbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-memcachedbinding-editor/Chart.yaml b/charts/catalogappscodecom-memcachedbinding-editor/Chart.yaml index 15f5ee35a3..fb9b72dc39 100644 --- a/charts/catalogappscodecom-memcachedbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-memcachedbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"memcachedbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MemcachedBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-memcachedbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-memcachedbinding-editor/README.md b/charts/catalogappscodecom-memcachedbinding-editor/README.md index a3a11e2c5a..e658b2d2cf 100644 --- a/charts/catalogappscodecom-memcachedbinding-editor/README.md +++ b/charts/catalogappscodecom-memcachedbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-memcachedbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-memcachedbinding-editor appscode/catalogappscodecom-memcachedbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-memcachedbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-memcachedbinding-editor appscode/catalogappscodecom-memcachedbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MemcachedBinding Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogappscodecom-memcachedbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-memcachedbinding-editor appscode/catalogappscodecom-memcachedbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-memcachedbinding-editor appscode/catalogappscodecom-memcachedbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MemcachedBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-memcachedbinding-editor appscode/catalogappscodecom-memcachedbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-memcachedbinding-editor appscode/catalogappscodecom-memcachedbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-memcachedbinding-editor appscode/catalogappscodecom-memcachedbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-memcachedbinding-editor appscode/catalogappscodecom-memcachedbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-mongodbbinding-editor/Chart.yaml b/charts/catalogappscodecom-mongodbbinding-editor/Chart.yaml index 7afc1eca5e..5f543e7cfc 100644 --- a/charts/catalogappscodecom-mongodbbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-mongodbbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"mongodbbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MongoDBBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-mongodbbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-mongodbbinding-editor/README.md b/charts/catalogappscodecom-mongodbbinding-editor/README.md index 83ebfd3557..554278043e 100644 --- a/charts/catalogappscodecom-mongodbbinding-editor/README.md +++ b/charts/catalogappscodecom-mongodbbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-mongodbbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-mongodbbinding-editor appscode/catalogappscodecom-mongodbbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-mongodbbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-mongodbbinding-editor appscode/catalogappscodecom-mongodbbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBBinding Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `catalogappscodecom-mongodbbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-mongodbbinding-editor appscode/catalogappscodecom-mongodbbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-mongodbbinding-editor appscode/catalogappscodecom-mongodbbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MongoDBBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-mongodbbinding-editor appscode/catalogappscodecom-mongodbbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-mongodbbinding-editor appscode/catalogappscodecom-mongodbbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-mongodbbinding-editor appscode/catalogappscodecom-mongodbbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-mongodbbinding-editor appscode/catalogappscodecom-mongodbbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-mssqlserverbinding-editor/Chart.yaml b/charts/catalogappscodecom-mssqlserverbinding-editor/Chart.yaml index 56e44c50fa..950a27d128 100644 --- a/charts/catalogappscodecom-mssqlserverbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-mssqlserverbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"mssqlserverbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLServerBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-mssqlserverbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-mssqlserverbinding-editor/README.md b/charts/catalogappscodecom-mssqlserverbinding-editor/README.md index f2acb646ff..a1366d0d98 100644 --- a/charts/catalogappscodecom-mssqlserverbinding-editor/README.md +++ b/charts/catalogappscodecom-mssqlserverbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-mssqlserverbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-mssqlserverbinding-editor appscode/catalogappscodecom-mssqlserverbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-mssqlserverbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-mssqlserverbinding-editor appscode/catalogappscodecom-mssqlserverbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerBinding Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `catalogappscodecom-mssqlserverbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-mssqlserverbinding-editor appscode/catalogappscodecom-mssqlserverbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-mssqlserverbinding-editor appscode/catalogappscodecom-mssqlserverbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLServerBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-mssqlserverbinding-editor appscode/catalogappscodecom-mssqlserverbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-mssqlserverbinding-editor appscode/catalogappscodecom-mssqlserverbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-mssqlserverbinding-editor appscode/catalogappscodecom-mssqlserverbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-mssqlserverbinding-editor appscode/catalogappscodecom-mssqlserverbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-mysqlbinding-editor/Chart.yaml b/charts/catalogappscodecom-mysqlbinding-editor/Chart.yaml index 69dc5e6b42..a8347f0dc9 100644 --- a/charts/catalogappscodecom-mysqlbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-mysqlbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"mysqlbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MySQLBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-mysqlbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-mysqlbinding-editor/README.md b/charts/catalogappscodecom-mysqlbinding-editor/README.md index 7c02c36e0b..594af4714c 100644 --- a/charts/catalogappscodecom-mysqlbinding-editor/README.md +++ b/charts/catalogappscodecom-mysqlbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-mysqlbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-mysqlbinding-editor appscode/catalogappscodecom-mysqlbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-mysqlbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-mysqlbinding-editor appscode/catalogappscodecom-mysqlbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogappscodecom-mysqlbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-mysqlbinding-editor appscode/catalogappscodecom-mysqlbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-mysqlbinding-editor appscode/catalogappscodecom-mysqlbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MySQLBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-mysqlbinding-editor appscode/catalogappscodecom-mysqlbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-mysqlbinding-editor appscode/catalogappscodecom-mysqlbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-mysqlbinding-editor appscode/catalogappscodecom-mysqlbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-mysqlbinding-editor appscode/catalogappscodecom-mysqlbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-perconaxtradbbinding-editor/Chart.yaml b/charts/catalogappscodecom-perconaxtradbbinding-editor/Chart.yaml index f746648f61..185fbd63d5 100644 --- a/charts/catalogappscodecom-perconaxtradbbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-perconaxtradbbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"perconaxtradbbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PerconaXtraDBBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-perconaxtradbbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-perconaxtradbbinding-editor/README.md b/charts/catalogappscodecom-perconaxtradbbinding-editor/README.md index 2f21b2889a..1f9657a39c 100644 --- a/charts/catalogappscodecom-perconaxtradbbinding-editor/README.md +++ b/charts/catalogappscodecom-perconaxtradbbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-perconaxtradbbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-perconaxtradbbinding-editor appscode/catalogappscodecom-perconaxtradbbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-perconaxtradbbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-perconaxtradbbinding-editor appscode/catalogappscodecom-perconaxtradbbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PerconaXtraDBBinding Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `catalogappscodecom-perconaxtradbbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-perconaxtradbbinding-editor appscode/catalogappscodecom-perconaxtradbbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-perconaxtradbbinding-editor appscode/catalogappscodecom-perconaxtradbbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PerconaXtraDBBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-perconaxtradbbinding-editor appscode/catalogappscodecom-perconaxtradbbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-perconaxtradbbinding-editor appscode/catalogappscodecom-perconaxtradbbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-perconaxtradbbinding-editor appscode/catalogappscodecom-perconaxtradbbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-perconaxtradbbinding-editor appscode/catalogappscodecom-perconaxtradbbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-pgbouncerbinding-editor/Chart.yaml b/charts/catalogappscodecom-pgbouncerbinding-editor/Chart.yaml index a4a718209e..95a609e0d6 100644 --- a/charts/catalogappscodecom-pgbouncerbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-pgbouncerbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"pgbouncerbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PgBouncerBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-pgbouncerbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-pgbouncerbinding-editor/README.md b/charts/catalogappscodecom-pgbouncerbinding-editor/README.md index 42efbb8a3a..b8839749b0 100644 --- a/charts/catalogappscodecom-pgbouncerbinding-editor/README.md +++ b/charts/catalogappscodecom-pgbouncerbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-pgbouncerbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-pgbouncerbinding-editor appscode/catalogappscodecom-pgbouncerbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-pgbouncerbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-pgbouncerbinding-editor appscode/catalogappscodecom-pgbouncerbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerBinding Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogappscodecom-pgbouncerbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-pgbouncerbinding-editor appscode/catalogappscodecom-pgbouncerbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-pgbouncerbinding-editor appscode/catalogappscodecom-pgbouncerbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PgBouncerBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-pgbouncerbinding-editor appscode/catalogappscodecom-pgbouncerbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-pgbouncerbinding-editor appscode/catalogappscodecom-pgbouncerbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-pgbouncerbinding-editor appscode/catalogappscodecom-pgbouncerbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-pgbouncerbinding-editor appscode/catalogappscodecom-pgbouncerbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-pgpoolbinding-editor/Chart.yaml b/charts/catalogappscodecom-pgpoolbinding-editor/Chart.yaml index 1d9d0e845a..165fd63950 100644 --- a/charts/catalogappscodecom-pgpoolbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-pgpoolbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"pgpoolbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PgpoolBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-pgpoolbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-pgpoolbinding-editor/README.md b/charts/catalogappscodecom-pgpoolbinding-editor/README.md index 6885f59394..522f6d9ef3 100644 --- a/charts/catalogappscodecom-pgpoolbinding-editor/README.md +++ b/charts/catalogappscodecom-pgpoolbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-pgpoolbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-pgpoolbinding-editor appscode/catalogappscodecom-pgpoolbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-pgpoolbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-pgpoolbinding-editor appscode/catalogappscodecom-pgpoolbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgpoolBinding Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `catalogappscodecom-pgpoolbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-pgpoolbinding-editor appscode/catalogappscodecom-pgpoolbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-pgpoolbinding-editor appscode/catalogappscodecom-pgpoolbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PgpoolBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-pgpoolbinding-editor appscode/catalogappscodecom-pgpoolbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-pgpoolbinding-editor appscode/catalogappscodecom-pgpoolbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-pgpoolbinding-editor appscode/catalogappscodecom-pgpoolbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-pgpoolbinding-editor appscode/catalogappscodecom-pgpoolbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-postgresbinding-editor/Chart.yaml b/charts/catalogappscodecom-postgresbinding-editor/Chart.yaml index c0b3a3c9f8..c247785b3f 100644 --- a/charts/catalogappscodecom-postgresbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-postgresbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"postgresbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PostgresBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-postgresbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-postgresbinding-editor/README.md b/charts/catalogappscodecom-postgresbinding-editor/README.md index 57ac099449..5d6e0440e8 100644 --- a/charts/catalogappscodecom-postgresbinding-editor/README.md +++ b/charts/catalogappscodecom-postgresbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-postgresbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-postgresbinding-editor appscode/catalogappscodecom-postgresbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-postgresbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-postgresbinding-editor appscode/catalogappscodecom-postgresbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresBinding Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogappscodecom-postgresbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-postgresbinding-editor appscode/catalogappscodecom-postgresbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-postgresbinding-editor appscode/catalogappscodecom-postgresbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PostgresBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-postgresbinding-editor appscode/catalogappscodecom-postgresbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-postgresbinding-editor appscode/catalogappscodecom-postgresbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-postgresbinding-editor appscode/catalogappscodecom-postgresbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-postgresbinding-editor appscode/catalogappscodecom-postgresbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-proxysqlbinding-editor/Chart.yaml b/charts/catalogappscodecom-proxysqlbinding-editor/Chart.yaml index a792b0511f..290c0e5798 100644 --- a/charts/catalogappscodecom-proxysqlbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-proxysqlbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"proxysqlbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProxySQLBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-proxysqlbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-proxysqlbinding-editor/README.md b/charts/catalogappscodecom-proxysqlbinding-editor/README.md index f1c5f47b1b..4dda3d8c1b 100644 --- a/charts/catalogappscodecom-proxysqlbinding-editor/README.md +++ b/charts/catalogappscodecom-proxysqlbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-proxysqlbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-proxysqlbinding-editor appscode/catalogappscodecom-proxysqlbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-proxysqlbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-proxysqlbinding-editor appscode/catalogappscodecom-proxysqlbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQLBinding Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogappscodecom-proxysqlbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-proxysqlbinding-editor appscode/catalogappscodecom-proxysqlbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-proxysqlbinding-editor appscode/catalogappscodecom-proxysqlbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProxySQLBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-proxysqlbinding-editor appscode/catalogappscodecom-proxysqlbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-proxysqlbinding-editor appscode/catalogappscodecom-proxysqlbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-proxysqlbinding-editor appscode/catalogappscodecom-proxysqlbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-proxysqlbinding-editor appscode/catalogappscodecom-proxysqlbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-rabbitmqbinding-editor/Chart.yaml b/charts/catalogappscodecom-rabbitmqbinding-editor/Chart.yaml index 7dbecc542f..cb1e4dca8a 100644 --- a/charts/catalogappscodecom-rabbitmqbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-rabbitmqbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"rabbitmqbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RabbitMQBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-rabbitmqbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-rabbitmqbinding-editor/README.md b/charts/catalogappscodecom-rabbitmqbinding-editor/README.md index 8e732224fc..64d386c125 100644 --- a/charts/catalogappscodecom-rabbitmqbinding-editor/README.md +++ b/charts/catalogappscodecom-rabbitmqbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-rabbitmqbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-rabbitmqbinding-editor appscode/catalogappscodecom-rabbitmqbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-rabbitmqbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-rabbitmqbinding-editor appscode/catalogappscodecom-rabbitmqbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RabbitMQBinding Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogappscodecom-rabbitmqbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-rabbitmqbinding-editor appscode/catalogappscodecom-rabbitmqbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-rabbitmqbinding-editor appscode/catalogappscodecom-rabbitmqbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RabbitMQBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-rabbitmqbinding-editor appscode/catalogappscodecom-rabbitmqbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-rabbitmqbinding-editor appscode/catalogappscodecom-rabbitmqbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-rabbitmqbinding-editor appscode/catalogappscodecom-rabbitmqbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-rabbitmqbinding-editor appscode/catalogappscodecom-rabbitmqbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-redisbinding-editor/Chart.yaml b/charts/catalogappscodecom-redisbinding-editor/Chart.yaml index 0908054532..33a6199235 100644 --- a/charts/catalogappscodecom-redisbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-redisbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"redisbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-redisbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-redisbinding-editor/README.md b/charts/catalogappscodecom-redisbinding-editor/README.md index dfdcf10426..ce202a15d8 100644 --- a/charts/catalogappscodecom-redisbinding-editor/README.md +++ b/charts/catalogappscodecom-redisbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-redisbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-redisbinding-editor appscode/catalogappscodecom-redisbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-redisbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-redisbinding-editor appscode/catalogappscodecom-redisbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogappscodecom-redisbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-redisbinding-editor appscode/catalogappscodecom-redisbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-redisbinding-editor appscode/catalogappscodecom-redisbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-redisbinding-editor appscode/catalogappscodecom-redisbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-redisbinding-editor appscode/catalogappscodecom-redisbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-redisbinding-editor appscode/catalogappscodecom-redisbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-redisbinding-editor appscode/catalogappscodecom-redisbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-singlestorebinding-editor/Chart.yaml b/charts/catalogappscodecom-singlestorebinding-editor/Chart.yaml index cca4a9ed8b..6904132fdb 100644 --- a/charts/catalogappscodecom-singlestorebinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-singlestorebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"singlestorebindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SinglestoreBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-singlestorebinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-singlestorebinding-editor/README.md b/charts/catalogappscodecom-singlestorebinding-editor/README.md index fc0a4a4864..f08ad83f1a 100644 --- a/charts/catalogappscodecom-singlestorebinding-editor/README.md +++ b/charts/catalogappscodecom-singlestorebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-singlestorebinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-singlestorebinding-editor appscode/catalogappscodecom-singlestorebinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-singlestorebinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-singlestorebinding-editor appscode/catalogappscodecom-singlestorebinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SinglestoreBinding Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `catalogappscodecom-singlestorebinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-singlestorebinding-editor appscode/catalogappscodecom-singlestorebinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-singlestorebinding-editor appscode/catalogappscodecom-singlestorebinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SinglestoreBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-singlestorebinding-editor appscode/catalogappscodecom-singlestorebinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-singlestorebinding-editor appscode/catalogappscodecom-singlestorebinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-singlestorebinding-editor appscode/catalogappscodecom-singlestorebinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-singlestorebinding-editor appscode/catalogappscodecom-singlestorebinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-solrbinding-editor/Chart.yaml b/charts/catalogappscodecom-solrbinding-editor/Chart.yaml index 234e8ead64..4ca6d5f524 100644 --- a/charts/catalogappscodecom-solrbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-solrbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"solrbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SolrBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-solrbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-solrbinding-editor/README.md b/charts/catalogappscodecom-solrbinding-editor/README.md index 2b9dda37b8..4fce0bddf6 100644 --- a/charts/catalogappscodecom-solrbinding-editor/README.md +++ b/charts/catalogappscodecom-solrbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-solrbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-solrbinding-editor appscode/catalogappscodecom-solrbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-solrbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-solrbinding-editor appscode/catalogappscodecom-solrbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SolrBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogappscodecom-solrbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-solrbinding-editor appscode/catalogappscodecom-solrbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-solrbinding-editor appscode/catalogappscodecom-solrbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SolrBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-solrbinding-editor appscode/catalogappscodecom-solrbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-solrbinding-editor appscode/catalogappscodecom-solrbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-solrbinding-editor appscode/catalogappscodecom-solrbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-solrbinding-editor appscode/catalogappscodecom-solrbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogappscodecom-zookeeperbinding-editor/Chart.yaml b/charts/catalogappscodecom-zookeeperbinding-editor/Chart.yaml index 98cb941cde..7ed7605188 100644 --- a/charts/catalogappscodecom-zookeeperbinding-editor/Chart.yaml +++ b/charts/catalogappscodecom-zookeeperbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.appscode.com","version":"v1alpha1","resource":"zookeeperbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ZooKeeperBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogappscodecom-zookeeperbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogappscodecom-zookeeperbinding-editor/README.md b/charts/catalogappscodecom-zookeeperbinding-editor/README.md index 2ed7f76546..e64362672b 100644 --- a/charts/catalogappscodecom-zookeeperbinding-editor/README.md +++ b/charts/catalogappscodecom-zookeeperbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogappscodecom-zookeeperbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogappscodecom-zookeeperbinding-editor appscode/catalogappscodecom-zookeeperbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogappscodecom-zookeeperbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogappscodecom-zookeeperbinding-editor appscode/catalogappscodecom-zookeeperbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ZooKeeperBinding Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogappscodecom-zookeeperbinding-editor`: ```bash -$ helm upgrade -i catalogappscodecom-zookeeperbinding-editor appscode/catalogappscodecom-zookeeperbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogappscodecom-zookeeperbinding-editor appscode/catalogappscodecom-zookeeperbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ZooKeeperBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogappscodecom-zookeeperbinding-editor appscode/catalogappscodecom-zookeeperbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.appscode.com/v1alpha1 +$ helm upgrade -i catalogappscodecom-zookeeperbinding-editor appscode/catalogappscodecom-zookeeperbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogappscodecom-zookeeperbinding-editor appscode/catalogappscodecom-zookeeperbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogappscodecom-zookeeperbinding-editor appscode/catalogappscodecom-zookeeperbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-cassandraversion-editor/Chart.yaml b/charts/catalogkubedbcom-cassandraversion-editor/Chart.yaml index 19893c9c98..3ff067aba6 100644 --- a/charts/catalogkubedbcom-cassandraversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-cassandraversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"cassandraversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: CassandraVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-cassandraversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-cassandraversion-editor/README.md b/charts/catalogkubedbcom-cassandraversion-editor/README.md index 8dc1085b99..8340803fb1 100644 --- a/charts/catalogkubedbcom-cassandraversion-editor/README.md +++ b/charts/catalogkubedbcom-cassandraversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-cassandraversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-cassandraversion-editor appscode/catalogkubedbcom-cassandraversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-cassandraversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-cassandraversion-editor appscode/catalogkubedbcom-cassandraversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CassandraVersion Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogkubedbcom-cassandraversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-cassandraversion-editor appscode/catalogkubedbcom-cassandraversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-cassandraversion-editor appscode/catalogkubedbcom-cassandraversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a CassandraVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-c Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-cassandraversion-editor appscode/catalogkubedbcom-cassandraversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-cassandraversion-editor appscode/catalogkubedbcom-cassandraversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-cassandraversion-editor appscode/catalogkubedbcom-cassandraversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-cassandraversion-editor appscode/catalogkubedbcom-cassandraversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-clickhouseversion-editor/Chart.yaml b/charts/catalogkubedbcom-clickhouseversion-editor/Chart.yaml index 13e7ae52d8..d1ac156515 100644 --- a/charts/catalogkubedbcom-clickhouseversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-clickhouseversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"clickhouseversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClickHouseVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-clickhouseversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-clickhouseversion-editor/README.md b/charts/catalogkubedbcom-clickhouseversion-editor/README.md index d438be80f6..2742dcf846 100644 --- a/charts/catalogkubedbcom-clickhouseversion-editor/README.md +++ b/charts/catalogkubedbcom-clickhouseversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-clickhouseversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-clickhouseversion-editor appscode/catalogkubedbcom-clickhouseversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-clickhouseversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-clickhouseversion-editor appscode/catalogkubedbcom-clickhouseversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClickHouseVersion Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `catalogkubedbcom-clickhouseversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-clickhouseversion-editor appscode/catalogkubedbcom-clickhouseversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-clickhouseversion-editor appscode/catalogkubedbcom-clickhouseversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClickHouseVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-c Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-clickhouseversion-editor appscode/catalogkubedbcom-clickhouseversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-clickhouseversion-editor appscode/catalogkubedbcom-clickhouseversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-clickhouseversion-editor appscode/catalogkubedbcom-clickhouseversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-clickhouseversion-editor appscode/catalogkubedbcom-clickhouseversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-druidversion-editor/Chart.yaml b/charts/catalogkubedbcom-druidversion-editor/Chart.yaml index a80abf97d9..e68afe5af8 100644 --- a/charts/catalogkubedbcom-druidversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-druidversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"druidversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: DruidVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-druidversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-druidversion-editor/README.md b/charts/catalogkubedbcom-druidversion-editor/README.md index adfa843a7c..cfb7a33b98 100644 --- a/charts/catalogkubedbcom-druidversion-editor/README.md +++ b/charts/catalogkubedbcom-druidversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-druidversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-druidversion-editor appscode/catalogkubedbcom-druidversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-druidversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-druidversion-editor appscode/catalogkubedbcom-druidversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DruidVersion Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubedbcom-druidversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-druidversion-editor appscode/catalogkubedbcom-druidversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-druidversion-editor appscode/catalogkubedbcom-druidversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a DruidVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-d Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-druidversion-editor appscode/catalogkubedbcom-druidversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-druidversion-editor appscode/catalogkubedbcom-druidversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-druidversion-editor appscode/catalogkubedbcom-druidversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-druidversion-editor appscode/catalogkubedbcom-druidversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-elasticsearchversion-editor/Chart.yaml b/charts/catalogkubedbcom-elasticsearchversion-editor/Chart.yaml index a19fd225a9..33b031e88d 100644 --- a/charts/catalogkubedbcom-elasticsearchversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-elasticsearchversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"elasticsearchversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ElasticsearchVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-elasticsearchversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-elasticsearchversion-editor/README.md b/charts/catalogkubedbcom-elasticsearchversion-editor/README.md index a438a7b072..c66fc588ca 100644 --- a/charts/catalogkubedbcom-elasticsearchversion-editor/README.md +++ b/charts/catalogkubedbcom-elasticsearchversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-elasticsearchversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-elasticsearchversion-editor appscode/catalogkubedbcom-elasticsearchversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-elasticsearchversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-elasticsearchversion-editor appscode/catalogkubedbcom-elasticsearchversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchVersion Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `catalogkubedbcom-elasticsearchversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-elasticsearchversion-editor appscode/catalogkubedbcom-elasticsearchversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-elasticsearchversion-editor appscode/catalogkubedbcom-elasticsearchversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ElasticsearchVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-elasticsearchversion-editor appscode/catalogkubedbcom-elasticsearchversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-elasticsearchversion-editor appscode/catalogkubedbcom-elasticsearchversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-elasticsearchversion-editor appscode/catalogkubedbcom-elasticsearchversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-elasticsearchversion-editor appscode/catalogkubedbcom-elasticsearchversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-etcdversion-editor/Chart.yaml b/charts/catalogkubedbcom-etcdversion-editor/Chart.yaml index b9cf678e6a..95b721e17b 100644 --- a/charts/catalogkubedbcom-etcdversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-etcdversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"etcdversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: EtcdVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-etcdversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-etcdversion-editor/README.md b/charts/catalogkubedbcom-etcdversion-editor/README.md index d1c2519d1c..f0bea47d9c 100644 --- a/charts/catalogkubedbcom-etcdversion-editor/README.md +++ b/charts/catalogkubedbcom-etcdversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-etcdversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-etcdversion-editor appscode/catalogkubedbcom-etcdversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-etcdversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-etcdversion-editor appscode/catalogkubedbcom-etcdversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EtcdVersion Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubedbcom-etcdversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-etcdversion-editor appscode/catalogkubedbcom-etcdversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-etcdversion-editor appscode/catalogkubedbcom-etcdversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a EtcdVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-etcdversion-editor appscode/catalogkubedbcom-etcdversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-etcdversion-editor appscode/catalogkubedbcom-etcdversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-etcdversion-editor appscode/catalogkubedbcom-etcdversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-etcdversion-editor appscode/catalogkubedbcom-etcdversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-ferretdbversion-editor/Chart.yaml b/charts/catalogkubedbcom-ferretdbversion-editor/Chart.yaml index 44b17ffa76..477bcd925c 100644 --- a/charts/catalogkubedbcom-ferretdbversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-ferretdbversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"ferretdbversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FerretDBVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-ferretdbversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-ferretdbversion-editor/README.md b/charts/catalogkubedbcom-ferretdbversion-editor/README.md index 2e54ca93c1..08c9cc28a8 100644 --- a/charts/catalogkubedbcom-ferretdbversion-editor/README.md +++ b/charts/catalogkubedbcom-ferretdbversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-ferretdbversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-ferretdbversion-editor appscode/catalogkubedbcom-ferretdbversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-ferretdbversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-ferretdbversion-editor appscode/catalogkubedbcom-ferretdbversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FerretDBVersion Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogkubedbcom-ferretdbversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-ferretdbversion-editor appscode/catalogkubedbcom-ferretdbversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-ferretdbversion-editor appscode/catalogkubedbcom-ferretdbversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FerretDBVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-ferretdbversion-editor appscode/catalogkubedbcom-ferretdbversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-ferretdbversion-editor appscode/catalogkubedbcom-ferretdbversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-ferretdbversion-editor appscode/catalogkubedbcom-ferretdbversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-ferretdbversion-editor appscode/catalogkubedbcom-ferretdbversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-hazelcastversion-editor/Chart.yaml b/charts/catalogkubedbcom-hazelcastversion-editor/Chart.yaml index e69c095fd8..caadb6a94b 100644 --- a/charts/catalogkubedbcom-hazelcastversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-hazelcastversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"hazelcastversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: HazelcastVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-hazelcastversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-hazelcastversion-editor/README.md b/charts/catalogkubedbcom-hazelcastversion-editor/README.md index 9bafbf9851..fbeca95ae8 100644 --- a/charts/catalogkubedbcom-hazelcastversion-editor/README.md +++ b/charts/catalogkubedbcom-hazelcastversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-hazelcastversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-hazelcastversion-editor appscode/catalogkubedbcom-hazelcastversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-hazelcastversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-hazelcastversion-editor appscode/catalogkubedbcom-hazelcastversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HazelcastVersion Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogkubedbcom-hazelcastversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-hazelcastversion-editor appscode/catalogkubedbcom-hazelcastversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-hazelcastversion-editor appscode/catalogkubedbcom-hazelcastversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a HazelcastVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-h Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-hazelcastversion-editor appscode/catalogkubedbcom-hazelcastversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-hazelcastversion-editor appscode/catalogkubedbcom-hazelcastversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-hazelcastversion-editor appscode/catalogkubedbcom-hazelcastversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-hazelcastversion-editor appscode/catalogkubedbcom-hazelcastversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-igniteversion-editor/Chart.yaml b/charts/catalogkubedbcom-igniteversion-editor/Chart.yaml index 2fb484f975..364827df11 100644 --- a/charts/catalogkubedbcom-igniteversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-igniteversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"igniteversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: IgniteVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-igniteversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-igniteversion-editor/README.md b/charts/catalogkubedbcom-igniteversion-editor/README.md index 65d0b4bdbc..b1f7edad04 100644 --- a/charts/catalogkubedbcom-igniteversion-editor/README.md +++ b/charts/catalogkubedbcom-igniteversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-igniteversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-igniteversion-editor appscode/catalogkubedbcom-igniteversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-igniteversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-igniteversion-editor appscode/catalogkubedbcom-igniteversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a IgniteVersion Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `catalogkubedbcom-igniteversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-igniteversion-editor appscode/catalogkubedbcom-igniteversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-igniteversion-editor appscode/catalogkubedbcom-igniteversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a IgniteVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-i Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-igniteversion-editor appscode/catalogkubedbcom-igniteversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-igniteversion-editor appscode/catalogkubedbcom-igniteversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-igniteversion-editor appscode/catalogkubedbcom-igniteversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-igniteversion-editor appscode/catalogkubedbcom-igniteversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-kafkaconnectorversion-editor/Chart.yaml b/charts/catalogkubedbcom-kafkaconnectorversion-editor/Chart.yaml index 3a04acba54..fa19187a7c 100644 --- a/charts/catalogkubedbcom-kafkaconnectorversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-kafkaconnectorversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"kafkaconnectorversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: KafkaConnectorVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-kafkaconnectorversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-kafkaconnectorversion-editor/README.md b/charts/catalogkubedbcom-kafkaconnectorversion-editor/README.md index 660f1db6f4..9c6273e934 100644 --- a/charts/catalogkubedbcom-kafkaconnectorversion-editor/README.md +++ b/charts/catalogkubedbcom-kafkaconnectorversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-kafkaconnectorversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-kafkaconnectorversion-editor appscode/catalogkubedbcom-kafkaconnectorversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-kafkaconnectorversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-kafkaconnectorversion-editor appscode/catalogkubedbcom-kafkaconnectorversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KafkaConnectorVersion Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `catalogkubedbcom-kafkaconnectorversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-kafkaconnectorversion-editor appscode/catalogkubedbcom-kafkaconnectorversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-kafkaconnectorversion-editor appscode/catalogkubedbcom-kafkaconnectorversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a KafkaConnectorVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-k Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-kafkaconnectorversion-editor appscode/catalogkubedbcom-kafkaconnectorversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-kafkaconnectorversion-editor appscode/catalogkubedbcom-kafkaconnectorversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-kafkaconnectorversion-editor appscode/catalogkubedbcom-kafkaconnectorversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-kafkaconnectorversion-editor appscode/catalogkubedbcom-kafkaconnectorversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-kafkaversion-editor/Chart.yaml b/charts/catalogkubedbcom-kafkaversion-editor/Chart.yaml index d263dc250d..4f21ba168c 100644 --- a/charts/catalogkubedbcom-kafkaversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-kafkaversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"kafkaversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: KafkaVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-kafkaversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-kafkaversion-editor/README.md b/charts/catalogkubedbcom-kafkaversion-editor/README.md index 5b9f28d6cf..2371d7ecbb 100644 --- a/charts/catalogkubedbcom-kafkaversion-editor/README.md +++ b/charts/catalogkubedbcom-kafkaversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-kafkaversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-kafkaversion-editor appscode/catalogkubedbcom-kafkaversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-kafkaversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-kafkaversion-editor appscode/catalogkubedbcom-kafkaversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KafkaVersion Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubedbcom-kafkaversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-kafkaversion-editor appscode/catalogkubedbcom-kafkaversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-kafkaversion-editor appscode/catalogkubedbcom-kafkaversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a KafkaVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-k Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-kafkaversion-editor appscode/catalogkubedbcom-kafkaversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-kafkaversion-editor appscode/catalogkubedbcom-kafkaversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-kafkaversion-editor appscode/catalogkubedbcom-kafkaversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-kafkaversion-editor appscode/catalogkubedbcom-kafkaversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-mariadbversion-editor/Chart.yaml b/charts/catalogkubedbcom-mariadbversion-editor/Chart.yaml index b5bb48c970..35e93bdfac 100644 --- a/charts/catalogkubedbcom-mariadbversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-mariadbversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"mariadbversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MariaDBVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-mariadbversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-mariadbversion-editor/README.md b/charts/catalogkubedbcom-mariadbversion-editor/README.md index 6eeeddc51e..4455964e23 100644 --- a/charts/catalogkubedbcom-mariadbversion-editor/README.md +++ b/charts/catalogkubedbcom-mariadbversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-mariadbversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-mariadbversion-editor appscode/catalogkubedbcom-mariadbversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-mariadbversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-mariadbversion-editor appscode/catalogkubedbcom-mariadbversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBVersion Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `catalogkubedbcom-mariadbversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-mariadbversion-editor appscode/catalogkubedbcom-mariadbversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-mariadbversion-editor appscode/catalogkubedbcom-mariadbversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MariaDBVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-m Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-mariadbversion-editor appscode/catalogkubedbcom-mariadbversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-mariadbversion-editor appscode/catalogkubedbcom-mariadbversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-mariadbversion-editor appscode/catalogkubedbcom-mariadbversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-mariadbversion-editor appscode/catalogkubedbcom-mariadbversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-memcachedversion-editor/Chart.yaml b/charts/catalogkubedbcom-memcachedversion-editor/Chart.yaml index 7323d65ba1..5a2d18147f 100644 --- a/charts/catalogkubedbcom-memcachedversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-memcachedversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"memcachedversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MemcachedVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-memcachedversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-memcachedversion-editor/README.md b/charts/catalogkubedbcom-memcachedversion-editor/README.md index ab6fab3cae..7fe252961d 100644 --- a/charts/catalogkubedbcom-memcachedversion-editor/README.md +++ b/charts/catalogkubedbcom-memcachedversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-memcachedversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-memcachedversion-editor appscode/catalogkubedbcom-memcachedversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-memcachedversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-memcachedversion-editor appscode/catalogkubedbcom-memcachedversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MemcachedVersion Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogkubedbcom-memcachedversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-memcachedversion-editor appscode/catalogkubedbcom-memcachedversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-memcachedversion-editor appscode/catalogkubedbcom-memcachedversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MemcachedVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-m Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-memcachedversion-editor appscode/catalogkubedbcom-memcachedversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-memcachedversion-editor appscode/catalogkubedbcom-memcachedversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-memcachedversion-editor appscode/catalogkubedbcom-memcachedversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-memcachedversion-editor appscode/catalogkubedbcom-memcachedversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-mongodbversion-editor/Chart.yaml b/charts/catalogkubedbcom-mongodbversion-editor/Chart.yaml index f188bd56a0..b87e6b34cd 100644 --- a/charts/catalogkubedbcom-mongodbversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-mongodbversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"mongodbversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MongoDBVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-mongodbversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-mongodbversion-editor/README.md b/charts/catalogkubedbcom-mongodbversion-editor/README.md index b026aece32..00f9bf2b3b 100644 --- a/charts/catalogkubedbcom-mongodbversion-editor/README.md +++ b/charts/catalogkubedbcom-mongodbversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-mongodbversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-mongodbversion-editor appscode/catalogkubedbcom-mongodbversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-mongodbversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-mongodbversion-editor appscode/catalogkubedbcom-mongodbversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBVersion Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `catalogkubedbcom-mongodbversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-mongodbversion-editor appscode/catalogkubedbcom-mongodbversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-mongodbversion-editor appscode/catalogkubedbcom-mongodbversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MongoDBVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-m Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-mongodbversion-editor appscode/catalogkubedbcom-mongodbversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-mongodbversion-editor appscode/catalogkubedbcom-mongodbversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-mongodbversion-editor appscode/catalogkubedbcom-mongodbversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-mongodbversion-editor appscode/catalogkubedbcom-mongodbversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-mssqlserverversion-editor/Chart.yaml b/charts/catalogkubedbcom-mssqlserverversion-editor/Chart.yaml index bd6df61594..506adf8049 100644 --- a/charts/catalogkubedbcom-mssqlserverversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-mssqlserverversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"mssqlserverversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLServerVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-mssqlserverversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-mssqlserverversion-editor/README.md b/charts/catalogkubedbcom-mssqlserverversion-editor/README.md index ad2f228d3d..b52778139a 100644 --- a/charts/catalogkubedbcom-mssqlserverversion-editor/README.md +++ b/charts/catalogkubedbcom-mssqlserverversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-mssqlserverversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-mssqlserverversion-editor appscode/catalogkubedbcom-mssqlserverversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-mssqlserverversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-mssqlserverversion-editor appscode/catalogkubedbcom-mssqlserverversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerVersion Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `catalogkubedbcom-mssqlserverversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-mssqlserverversion-editor appscode/catalogkubedbcom-mssqlserverversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-mssqlserverversion-editor appscode/catalogkubedbcom-mssqlserverversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLServerVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-m Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-mssqlserverversion-editor appscode/catalogkubedbcom-mssqlserverversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-mssqlserverversion-editor appscode/catalogkubedbcom-mssqlserverversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-mssqlserverversion-editor appscode/catalogkubedbcom-mssqlserverversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-mssqlserverversion-editor appscode/catalogkubedbcom-mssqlserverversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-mysqlversion-editor/Chart.yaml b/charts/catalogkubedbcom-mysqlversion-editor/Chart.yaml index f894d59e9c..00105354be 100644 --- a/charts/catalogkubedbcom-mysqlversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-mysqlversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"mysqlversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MySQLVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-mysqlversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-mysqlversion-editor/README.md b/charts/catalogkubedbcom-mysqlversion-editor/README.md index d97e85df39..17256cd9e4 100644 --- a/charts/catalogkubedbcom-mysqlversion-editor/README.md +++ b/charts/catalogkubedbcom-mysqlversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-mysqlversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-mysqlversion-editor appscode/catalogkubedbcom-mysqlversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-mysqlversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-mysqlversion-editor appscode/catalogkubedbcom-mysqlversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLVersion Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubedbcom-mysqlversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-mysqlversion-editor appscode/catalogkubedbcom-mysqlversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-mysqlversion-editor appscode/catalogkubedbcom-mysqlversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MySQLVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-m Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-mysqlversion-editor appscode/catalogkubedbcom-mysqlversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-mysqlversion-editor appscode/catalogkubedbcom-mysqlversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-mysqlversion-editor appscode/catalogkubedbcom-mysqlversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-mysqlversion-editor appscode/catalogkubedbcom-mysqlversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-oracleversion-editor/Chart.yaml b/charts/catalogkubedbcom-oracleversion-editor/Chart.yaml index 403833dcb3..e298b5d8c8 100644 --- a/charts/catalogkubedbcom-oracleversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-oracleversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"oracleversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: OracleVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-oracleversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-oracleversion-editor/README.md b/charts/catalogkubedbcom-oracleversion-editor/README.md index 86e3d0f465..0778f05439 100644 --- a/charts/catalogkubedbcom-oracleversion-editor/README.md +++ b/charts/catalogkubedbcom-oracleversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-oracleversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-oracleversion-editor appscode/catalogkubedbcom-oracleversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-oracleversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-oracleversion-editor appscode/catalogkubedbcom-oracleversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a OracleVersion Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `catalogkubedbcom-oracleversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-oracleversion-editor appscode/catalogkubedbcom-oracleversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-oracleversion-editor appscode/catalogkubedbcom-oracleversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a OracleVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-o Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-oracleversion-editor appscode/catalogkubedbcom-oracleversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-oracleversion-editor appscode/catalogkubedbcom-oracleversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-oracleversion-editor appscode/catalogkubedbcom-oracleversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-oracleversion-editor appscode/catalogkubedbcom-oracleversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-perconaxtradbversion-editor/Chart.yaml b/charts/catalogkubedbcom-perconaxtradbversion-editor/Chart.yaml index 84ab935dd1..216cfd15f3 100644 --- a/charts/catalogkubedbcom-perconaxtradbversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-perconaxtradbversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"perconaxtradbversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PerconaXtraDBVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-perconaxtradbversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-perconaxtradbversion-editor/README.md b/charts/catalogkubedbcom-perconaxtradbversion-editor/README.md index 5e67d2fbe6..591dbebcfd 100644 --- a/charts/catalogkubedbcom-perconaxtradbversion-editor/README.md +++ b/charts/catalogkubedbcom-perconaxtradbversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-perconaxtradbversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-perconaxtradbversion-editor appscode/catalogkubedbcom-perconaxtradbversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-perconaxtradbversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-perconaxtradbversion-editor appscode/catalogkubedbcom-perconaxtradbversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PerconaXtraDBVersion Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `catalogkubedbcom-perconaxtradbversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-perconaxtradbversion-editor appscode/catalogkubedbcom-perconaxtradbversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-perconaxtradbversion-editor appscode/catalogkubedbcom-perconaxtradbversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PerconaXtraDBVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-p Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-perconaxtradbversion-editor appscode/catalogkubedbcom-perconaxtradbversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-perconaxtradbversion-editor appscode/catalogkubedbcom-perconaxtradbversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-perconaxtradbversion-editor appscode/catalogkubedbcom-perconaxtradbversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-perconaxtradbversion-editor appscode/catalogkubedbcom-perconaxtradbversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-pgbouncerversion-editor/Chart.yaml b/charts/catalogkubedbcom-pgbouncerversion-editor/Chart.yaml index 44a8eef74b..a265f90d79 100644 --- a/charts/catalogkubedbcom-pgbouncerversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-pgbouncerversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"pgbouncerversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PgBouncerVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-pgbouncerversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-pgbouncerversion-editor/README.md b/charts/catalogkubedbcom-pgbouncerversion-editor/README.md index 81fce0bf9f..2e794295bb 100644 --- a/charts/catalogkubedbcom-pgbouncerversion-editor/README.md +++ b/charts/catalogkubedbcom-pgbouncerversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-pgbouncerversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-pgbouncerversion-editor appscode/catalogkubedbcom-pgbouncerversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-pgbouncerversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-pgbouncerversion-editor appscode/catalogkubedbcom-pgbouncerversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerVersion Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogkubedbcom-pgbouncerversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-pgbouncerversion-editor appscode/catalogkubedbcom-pgbouncerversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-pgbouncerversion-editor appscode/catalogkubedbcom-pgbouncerversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PgBouncerVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-p Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-pgbouncerversion-editor appscode/catalogkubedbcom-pgbouncerversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-pgbouncerversion-editor appscode/catalogkubedbcom-pgbouncerversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-pgbouncerversion-editor appscode/catalogkubedbcom-pgbouncerversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-pgbouncerversion-editor appscode/catalogkubedbcom-pgbouncerversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-pgpoolversion-editor/Chart.yaml b/charts/catalogkubedbcom-pgpoolversion-editor/Chart.yaml index 0e12a79f8a..01068063b3 100644 --- a/charts/catalogkubedbcom-pgpoolversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-pgpoolversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"pgpoolversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PgpoolVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-pgpoolversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-pgpoolversion-editor/README.md b/charts/catalogkubedbcom-pgpoolversion-editor/README.md index 1eec8210a6..607a214e6c 100644 --- a/charts/catalogkubedbcom-pgpoolversion-editor/README.md +++ b/charts/catalogkubedbcom-pgpoolversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-pgpoolversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-pgpoolversion-editor appscode/catalogkubedbcom-pgpoolversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-pgpoolversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-pgpoolversion-editor appscode/catalogkubedbcom-pgpoolversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgpoolVersion Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `catalogkubedbcom-pgpoolversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-pgpoolversion-editor appscode/catalogkubedbcom-pgpoolversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-pgpoolversion-editor appscode/catalogkubedbcom-pgpoolversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PgpoolVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-p Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-pgpoolversion-editor appscode/catalogkubedbcom-pgpoolversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-pgpoolversion-editor appscode/catalogkubedbcom-pgpoolversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-pgpoolversion-editor appscode/catalogkubedbcom-pgpoolversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-pgpoolversion-editor appscode/catalogkubedbcom-pgpoolversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-postgresversion-editor/Chart.yaml b/charts/catalogkubedbcom-postgresversion-editor/Chart.yaml index 90d05fd9a8..91ee10a414 100644 --- a/charts/catalogkubedbcom-postgresversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-postgresversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"postgresversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PostgresVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-postgresversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-postgresversion-editor/README.md b/charts/catalogkubedbcom-postgresversion-editor/README.md index 16e9d222d7..185c7cb211 100644 --- a/charts/catalogkubedbcom-postgresversion-editor/README.md +++ b/charts/catalogkubedbcom-postgresversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-postgresversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-postgresversion-editor appscode/catalogkubedbcom-postgresversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-postgresversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-postgresversion-editor appscode/catalogkubedbcom-postgresversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresVersion Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogkubedbcom-postgresversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-postgresversion-editor appscode/catalogkubedbcom-postgresversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-postgresversion-editor appscode/catalogkubedbcom-postgresversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PostgresVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-p Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-postgresversion-editor appscode/catalogkubedbcom-postgresversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-postgresversion-editor appscode/catalogkubedbcom-postgresversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-postgresversion-editor appscode/catalogkubedbcom-postgresversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-postgresversion-editor appscode/catalogkubedbcom-postgresversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-proxysqlversion-editor/Chart.yaml b/charts/catalogkubedbcom-proxysqlversion-editor/Chart.yaml index a9776dcfbd..afa95c205a 100644 --- a/charts/catalogkubedbcom-proxysqlversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-proxysqlversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"proxysqlversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProxySQLVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-proxysqlversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-proxysqlversion-editor/README.md b/charts/catalogkubedbcom-proxysqlversion-editor/README.md index bbecd925ad..c76b960ca4 100644 --- a/charts/catalogkubedbcom-proxysqlversion-editor/README.md +++ b/charts/catalogkubedbcom-proxysqlversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-proxysqlversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-proxysqlversion-editor appscode/catalogkubedbcom-proxysqlversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-proxysqlversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-proxysqlversion-editor appscode/catalogkubedbcom-proxysqlversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQLVersion Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogkubedbcom-proxysqlversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-proxysqlversion-editor appscode/catalogkubedbcom-proxysqlversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-proxysqlversion-editor appscode/catalogkubedbcom-proxysqlversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProxySQLVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-p Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-proxysqlversion-editor appscode/catalogkubedbcom-proxysqlversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-proxysqlversion-editor appscode/catalogkubedbcom-proxysqlversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-proxysqlversion-editor appscode/catalogkubedbcom-proxysqlversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-proxysqlversion-editor appscode/catalogkubedbcom-proxysqlversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-rabbitmqversion-editor/Chart.yaml b/charts/catalogkubedbcom-rabbitmqversion-editor/Chart.yaml index dd0a5fc0a3..f54c5e446a 100644 --- a/charts/catalogkubedbcom-rabbitmqversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-rabbitmqversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"rabbitmqversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RabbitMQVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-rabbitmqversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-rabbitmqversion-editor/README.md b/charts/catalogkubedbcom-rabbitmqversion-editor/README.md index ae97cd9cd2..927447a5ce 100644 --- a/charts/catalogkubedbcom-rabbitmqversion-editor/README.md +++ b/charts/catalogkubedbcom-rabbitmqversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-rabbitmqversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-rabbitmqversion-editor appscode/catalogkubedbcom-rabbitmqversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-rabbitmqversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-rabbitmqversion-editor appscode/catalogkubedbcom-rabbitmqversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RabbitMQVersion Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogkubedbcom-rabbitmqversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-rabbitmqversion-editor appscode/catalogkubedbcom-rabbitmqversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-rabbitmqversion-editor appscode/catalogkubedbcom-rabbitmqversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RabbitMQVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-rabbitmqversion-editor appscode/catalogkubedbcom-rabbitmqversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-rabbitmqversion-editor appscode/catalogkubedbcom-rabbitmqversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-rabbitmqversion-editor appscode/catalogkubedbcom-rabbitmqversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-rabbitmqversion-editor appscode/catalogkubedbcom-rabbitmqversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-redisversion-editor/Chart.yaml b/charts/catalogkubedbcom-redisversion-editor/Chart.yaml index eafbbfd9d6..4c55859382 100644 --- a/charts/catalogkubedbcom-redisversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-redisversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"redisversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-redisversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-redisversion-editor/README.md b/charts/catalogkubedbcom-redisversion-editor/README.md index 3f170e73fe..4281111977 100644 --- a/charts/catalogkubedbcom-redisversion-editor/README.md +++ b/charts/catalogkubedbcom-redisversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-redisversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-redisversion-editor appscode/catalogkubedbcom-redisversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-redisversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-redisversion-editor appscode/catalogkubedbcom-redisversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisVersion Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubedbcom-redisversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-redisversion-editor appscode/catalogkubedbcom-redisversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-redisversion-editor appscode/catalogkubedbcom-redisversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-redisversion-editor appscode/catalogkubedbcom-redisversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-redisversion-editor appscode/catalogkubedbcom-redisversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-redisversion-editor appscode/catalogkubedbcom-redisversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-redisversion-editor appscode/catalogkubedbcom-redisversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-schemaregistryversion-editor/Chart.yaml b/charts/catalogkubedbcom-schemaregistryversion-editor/Chart.yaml index 359b4cd51c..1c3fd6c6bd 100644 --- a/charts/catalogkubedbcom-schemaregistryversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-schemaregistryversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"schemaregistryversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SchemaRegistryVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-schemaregistryversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-schemaregistryversion-editor/README.md b/charts/catalogkubedbcom-schemaregistryversion-editor/README.md index 8acf3f3f7b..b0a7b676b9 100644 --- a/charts/catalogkubedbcom-schemaregistryversion-editor/README.md +++ b/charts/catalogkubedbcom-schemaregistryversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-schemaregistryversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-schemaregistryversion-editor appscode/catalogkubedbcom-schemaregistryversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-schemaregistryversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-schemaregistryversion-editor appscode/catalogkubedbcom-schemaregistryversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SchemaRegistryVersion Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `catalogkubedbcom-schemaregistryversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-schemaregistryversion-editor appscode/catalogkubedbcom-schemaregistryversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-schemaregistryversion-editor appscode/catalogkubedbcom-schemaregistryversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SchemaRegistryVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-s Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-schemaregistryversion-editor appscode/catalogkubedbcom-schemaregistryversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-schemaregistryversion-editor appscode/catalogkubedbcom-schemaregistryversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-schemaregistryversion-editor appscode/catalogkubedbcom-schemaregistryversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-schemaregistryversion-editor appscode/catalogkubedbcom-schemaregistryversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-singlestoreversion-editor/Chart.yaml b/charts/catalogkubedbcom-singlestoreversion-editor/Chart.yaml index dbcaf9e03b..bd3d6f9695 100644 --- a/charts/catalogkubedbcom-singlestoreversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-singlestoreversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"singlestoreversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SinglestoreVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-singlestoreversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-singlestoreversion-editor/README.md b/charts/catalogkubedbcom-singlestoreversion-editor/README.md index af79a5afb3..8531d94b4f 100644 --- a/charts/catalogkubedbcom-singlestoreversion-editor/README.md +++ b/charts/catalogkubedbcom-singlestoreversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-singlestoreversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-singlestoreversion-editor appscode/catalogkubedbcom-singlestoreversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-singlestoreversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-singlestoreversion-editor appscode/catalogkubedbcom-singlestoreversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SinglestoreVersion Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `catalogkubedbcom-singlestoreversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-singlestoreversion-editor appscode/catalogkubedbcom-singlestoreversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-singlestoreversion-editor appscode/catalogkubedbcom-singlestoreversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SinglestoreVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-s Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-singlestoreversion-editor appscode/catalogkubedbcom-singlestoreversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-singlestoreversion-editor appscode/catalogkubedbcom-singlestoreversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-singlestoreversion-editor appscode/catalogkubedbcom-singlestoreversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-singlestoreversion-editor appscode/catalogkubedbcom-singlestoreversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-solrversion-editor/Chart.yaml b/charts/catalogkubedbcom-solrversion-editor/Chart.yaml index 3190a24e5e..174ad84d36 100644 --- a/charts/catalogkubedbcom-solrversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-solrversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"solrversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SolrVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-solrversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-solrversion-editor/README.md b/charts/catalogkubedbcom-solrversion-editor/README.md index e7b9a01f5d..029c1763da 100644 --- a/charts/catalogkubedbcom-solrversion-editor/README.md +++ b/charts/catalogkubedbcom-solrversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-solrversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-solrversion-editor appscode/catalogkubedbcom-solrversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-solrversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-solrversion-editor appscode/catalogkubedbcom-solrversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SolrVersion Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubedbcom-solrversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-solrversion-editor appscode/catalogkubedbcom-solrversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-solrversion-editor appscode/catalogkubedbcom-solrversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SolrVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-s Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-solrversion-editor appscode/catalogkubedbcom-solrversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-solrversion-editor appscode/catalogkubedbcom-solrversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-solrversion-editor appscode/catalogkubedbcom-solrversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-solrversion-editor appscode/catalogkubedbcom-solrversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubedbcom-zookeeperversion-editor/Chart.yaml b/charts/catalogkubedbcom-zookeeperversion-editor/Chart.yaml index b8957948e5..b81a27ac83 100644 --- a/charts/catalogkubedbcom-zookeeperversion-editor/Chart.yaml +++ b/charts/catalogkubedbcom-zookeeperversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubedb.com","version":"v1alpha1","resource":"zookeeperversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ZooKeeperVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubedbcom-zookeeperversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubedbcom-zookeeperversion-editor/README.md b/charts/catalogkubedbcom-zookeeperversion-editor/README.md index 74fc2dac51..81e4d37ccf 100644 --- a/charts/catalogkubedbcom-zookeeperversion-editor/README.md +++ b/charts/catalogkubedbcom-zookeeperversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubedbcom-zookeeperversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubedbcom-zookeeperversion-editor appscode/catalogkubedbcom-zookeeperversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubedbcom-zookeeperversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubedbcom-zookeeperversion-editor appscode/catalogkubedbcom-zookeeperversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ZooKeeperVersion Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogkubedbcom-zookeeperversion-editor`: ```bash -$ helm upgrade -i catalogkubedbcom-zookeeperversion-editor appscode/catalogkubedbcom-zookeeperversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubedbcom-zookeeperversion-editor appscode/catalogkubedbcom-zookeeperversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ZooKeeperVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubedbcom-z Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubedbcom-zookeeperversion-editor appscode/catalogkubedbcom-zookeeperversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubedb.com/v1alpha1 +$ helm upgrade -i catalogkubedbcom-zookeeperversion-editor appscode/catalogkubedbcom-zookeeperversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubedbcom-zookeeperversion-editor appscode/catalogkubedbcom-zookeeperversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubedbcom-zookeeperversion-editor appscode/catalogkubedbcom-zookeeperversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubevaultcom-vaultserverversion-editor/Chart.yaml b/charts/catalogkubevaultcom-vaultserverversion-editor/Chart.yaml index f0f1a6a659..b38a06b086 100644 --- a/charts/catalogkubevaultcom-vaultserverversion-editor/Chart.yaml +++ b/charts/catalogkubevaultcom-vaultserverversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubevault.com","version":"v1alpha1","resource":"vaultserverversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VaultServerVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubevaultcom-vaultserverversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubevaultcom-vaultserverversion-editor/README.md b/charts/catalogkubevaultcom-vaultserverversion-editor/README.md index 6ce495c2d0..634f32898d 100644 --- a/charts/catalogkubevaultcom-vaultserverversion-editor/README.md +++ b/charts/catalogkubevaultcom-vaultserverversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubevaultcom-vaultserverversion-editor --version=v0.23.0 -$ helm upgrade -i catalogkubevaultcom-vaultserverversion-editor appscode/catalogkubevaultcom-vaultserverversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubevaultcom-vaultserverversion-editor --version=v0.24.0 +$ helm upgrade -i catalogkubevaultcom-vaultserverversion-editor appscode/catalogkubevaultcom-vaultserverversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VaultServerVersion Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `catalogkubevaultcom-vaultserverversion-editor`: ```bash -$ helm upgrade -i catalogkubevaultcom-vaultserverversion-editor appscode/catalogkubevaultcom-vaultserverversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubevaultcom-vaultserverversion-editor appscode/catalogkubevaultcom-vaultserverversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VaultServerVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubevaultco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubevaultcom-vaultserverversion-editor appscode/catalogkubevaultcom-vaultserverversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubevault.com/v1alpha1 +$ helm upgrade -i catalogkubevaultcom-vaultserverversion-editor appscode/catalogkubevaultcom-vaultserverversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubevaultcom-vaultserverversion-editor appscode/catalogkubevaultcom-vaultserverversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubevaultcom-vaultserverversion-editor appscode/catalogkubevaultcom-vaultserverversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-elasticsearchbinding-editor/Chart.yaml b/charts/catalogkubewaredev-elasticsearchbinding-editor/Chart.yaml index 593dac8860..6990502f2c 100644 --- a/charts/catalogkubewaredev-elasticsearchbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-elasticsearchbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"elasticsearchbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ElasticsearchBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-elasticsearchbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubewaredev-elasticsearchbinding-editor/README.md b/charts/catalogkubewaredev-elasticsearchbinding-editor/README.md index dfe5f630c7..81be429de3 100644 --- a/charts/catalogkubewaredev-elasticsearchbinding-editor/README.md +++ b/charts/catalogkubewaredev-elasticsearchbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-elasticsearchbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogkubewaredev-elasticsearchbinding-editor appscode/catalogkubewaredev-elasticsearchbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubewaredev-elasticsearchbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogkubewaredev-elasticsearchbinding-editor appscode/catalogkubewaredev-elasticsearchbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchBinding Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `catalogkubewaredev-elasticsearchbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-elasticsearchbinding-editor appscode/catalogkubewaredev-elasticsearchbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubewaredev-elasticsearchbinding-editor appscode/catalogkubewaredev-elasticsearchbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ElasticsearchBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-elasticsearchbinding-editor appscode/catalogkubewaredev-elasticsearchbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-elasticsearchbinding-editor appscode/catalogkubewaredev-elasticsearchbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-elasticsearchbinding-editor appscode/catalogkubewaredev-elasticsearchbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-elasticsearchbinding-editor appscode/catalogkubewaredev-elasticsearchbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-kafkabinding-editor/Chart.yaml b/charts/catalogkubewaredev-kafkabinding-editor/Chart.yaml index 2b048cdf3f..d19681c44c 100644 --- a/charts/catalogkubewaredev-kafkabinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-kafkabinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"kafkabindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: KafkaBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-kafkabinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubewaredev-kafkabinding-editor/README.md b/charts/catalogkubewaredev-kafkabinding-editor/README.md index 169f8555d0..2a56820706 100644 --- a/charts/catalogkubewaredev-kafkabinding-editor/README.md +++ b/charts/catalogkubewaredev-kafkabinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-kafkabinding-editor --version=v0.23.0 -$ helm upgrade -i catalogkubewaredev-kafkabinding-editor appscode/catalogkubewaredev-kafkabinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubewaredev-kafkabinding-editor --version=v0.24.0 +$ helm upgrade -i catalogkubewaredev-kafkabinding-editor appscode/catalogkubewaredev-kafkabinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KafkaBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubewaredev-kafkabinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-kafkabinding-editor appscode/catalogkubewaredev-kafkabinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubewaredev-kafkabinding-editor appscode/catalogkubewaredev-kafkabinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a KafkaBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-kafkabinding-editor appscode/catalogkubewaredev-kafkabinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-kafkabinding-editor appscode/catalogkubewaredev-kafkabinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-kafkabinding-editor appscode/catalogkubewaredev-kafkabinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-kafkabinding-editor appscode/catalogkubewaredev-kafkabinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-mariadbbinding-editor/Chart.yaml b/charts/catalogkubewaredev-mariadbbinding-editor/Chart.yaml index da8c9b85b6..24fb5e81be 100644 --- a/charts/catalogkubewaredev-mariadbbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-mariadbbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"mariadbbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MariaDBBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-mariadbbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubewaredev-mariadbbinding-editor/README.md b/charts/catalogkubewaredev-mariadbbinding-editor/README.md index 184e069349..0e566bfbd4 100644 --- a/charts/catalogkubewaredev-mariadbbinding-editor/README.md +++ b/charts/catalogkubewaredev-mariadbbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-mariadbbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogkubewaredev-mariadbbinding-editor appscode/catalogkubewaredev-mariadbbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubewaredev-mariadbbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogkubewaredev-mariadbbinding-editor appscode/catalogkubewaredev-mariadbbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBBinding Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `catalogkubewaredev-mariadbbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-mariadbbinding-editor appscode/catalogkubewaredev-mariadbbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubewaredev-mariadbbinding-editor appscode/catalogkubewaredev-mariadbbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MariaDBBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-mariadbbinding-editor appscode/catalogkubewaredev-mariadbbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-mariadbbinding-editor appscode/catalogkubewaredev-mariadbbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-mariadbbinding-editor appscode/catalogkubewaredev-mariadbbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-mariadbbinding-editor appscode/catalogkubewaredev-mariadbbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-memcachedbinding-editor/Chart.yaml b/charts/catalogkubewaredev-memcachedbinding-editor/Chart.yaml index 90f4fa6e5a..9b893a2b8b 100644 --- a/charts/catalogkubewaredev-memcachedbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-memcachedbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"memcachedbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MemcachedBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-memcachedbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubewaredev-memcachedbinding-editor/README.md b/charts/catalogkubewaredev-memcachedbinding-editor/README.md index ad59809331..3726a0fefd 100644 --- a/charts/catalogkubewaredev-memcachedbinding-editor/README.md +++ b/charts/catalogkubewaredev-memcachedbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-memcachedbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogkubewaredev-memcachedbinding-editor appscode/catalogkubewaredev-memcachedbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubewaredev-memcachedbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogkubewaredev-memcachedbinding-editor appscode/catalogkubewaredev-memcachedbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MemcachedBinding Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogkubewaredev-memcachedbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-memcachedbinding-editor appscode/catalogkubewaredev-memcachedbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubewaredev-memcachedbinding-editor appscode/catalogkubewaredev-memcachedbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MemcachedBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-memcachedbinding-editor appscode/catalogkubewaredev-memcachedbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-memcachedbinding-editor appscode/catalogkubewaredev-memcachedbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-memcachedbinding-editor appscode/catalogkubewaredev-memcachedbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-memcachedbinding-editor appscode/catalogkubewaredev-memcachedbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-mongodbbinding-editor/Chart.yaml b/charts/catalogkubewaredev-mongodbbinding-editor/Chart.yaml index 214dc611a2..b3b38abcef 100644 --- a/charts/catalogkubewaredev-mongodbbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-mongodbbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"mongodbbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MongoDBBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-mongodbbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubewaredev-mongodbbinding-editor/README.md b/charts/catalogkubewaredev-mongodbbinding-editor/README.md index 1e8a491343..a3917ed678 100644 --- a/charts/catalogkubewaredev-mongodbbinding-editor/README.md +++ b/charts/catalogkubewaredev-mongodbbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-mongodbbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogkubewaredev-mongodbbinding-editor appscode/catalogkubewaredev-mongodbbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubewaredev-mongodbbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogkubewaredev-mongodbbinding-editor appscode/catalogkubewaredev-mongodbbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBBinding Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `catalogkubewaredev-mongodbbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-mongodbbinding-editor appscode/catalogkubewaredev-mongodbbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubewaredev-mongodbbinding-editor appscode/catalogkubewaredev-mongodbbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MongoDBBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-mongodbbinding-editor appscode/catalogkubewaredev-mongodbbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-mongodbbinding-editor appscode/catalogkubewaredev-mongodbbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-mongodbbinding-editor appscode/catalogkubewaredev-mongodbbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-mongodbbinding-editor appscode/catalogkubewaredev-mongodbbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-mysqlbinding-editor/Chart.yaml b/charts/catalogkubewaredev-mysqlbinding-editor/Chart.yaml index 88b278b4ae..582651af88 100644 --- a/charts/catalogkubewaredev-mysqlbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-mysqlbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"mysqlbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MySQLBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-mysqlbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubewaredev-mysqlbinding-editor/README.md b/charts/catalogkubewaredev-mysqlbinding-editor/README.md index afcd0ed469..b7462b9601 100644 --- a/charts/catalogkubewaredev-mysqlbinding-editor/README.md +++ b/charts/catalogkubewaredev-mysqlbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-mysqlbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogkubewaredev-mysqlbinding-editor appscode/catalogkubewaredev-mysqlbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubewaredev-mysqlbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogkubewaredev-mysqlbinding-editor appscode/catalogkubewaredev-mysqlbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubewaredev-mysqlbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-mysqlbinding-editor appscode/catalogkubewaredev-mysqlbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubewaredev-mysqlbinding-editor appscode/catalogkubewaredev-mysqlbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MySQLBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-mysqlbinding-editor appscode/catalogkubewaredev-mysqlbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-mysqlbinding-editor appscode/catalogkubewaredev-mysqlbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-mysqlbinding-editor appscode/catalogkubewaredev-mysqlbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-mysqlbinding-editor appscode/catalogkubewaredev-mysqlbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-perconaxtradbbinding-editor/Chart.yaml b/charts/catalogkubewaredev-perconaxtradbbinding-editor/Chart.yaml index 2ba67944e6..4ff1aa72cc 100644 --- a/charts/catalogkubewaredev-perconaxtradbbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-perconaxtradbbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"perconaxtradbbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PerconaXtraDBBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-perconaxtradbbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubewaredev-perconaxtradbbinding-editor/README.md b/charts/catalogkubewaredev-perconaxtradbbinding-editor/README.md index 263c688385..d31b72b503 100644 --- a/charts/catalogkubewaredev-perconaxtradbbinding-editor/README.md +++ b/charts/catalogkubewaredev-perconaxtradbbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-perconaxtradbbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogkubewaredev-perconaxtradbbinding-editor appscode/catalogkubewaredev-perconaxtradbbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubewaredev-perconaxtradbbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogkubewaredev-perconaxtradbbinding-editor appscode/catalogkubewaredev-perconaxtradbbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PerconaXtraDBBinding Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `catalogkubewaredev-perconaxtradbbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-perconaxtradbbinding-editor appscode/catalogkubewaredev-perconaxtradbbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubewaredev-perconaxtradbbinding-editor appscode/catalogkubewaredev-perconaxtradbbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PerconaXtraDBBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-perconaxtradbbinding-editor appscode/catalogkubewaredev-perconaxtradbbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-perconaxtradbbinding-editor appscode/catalogkubewaredev-perconaxtradbbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-perconaxtradbbinding-editor appscode/catalogkubewaredev-perconaxtradbbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-perconaxtradbbinding-editor appscode/catalogkubewaredev-perconaxtradbbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-pgbouncerbinding-editor/Chart.yaml b/charts/catalogkubewaredev-pgbouncerbinding-editor/Chart.yaml index 956183f12b..0da55f9c22 100644 --- a/charts/catalogkubewaredev-pgbouncerbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-pgbouncerbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"pgbouncerbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PgBouncerBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-pgbouncerbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubewaredev-pgbouncerbinding-editor/README.md b/charts/catalogkubewaredev-pgbouncerbinding-editor/README.md index ccb12711cc..6b310d90da 100644 --- a/charts/catalogkubewaredev-pgbouncerbinding-editor/README.md +++ b/charts/catalogkubewaredev-pgbouncerbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-pgbouncerbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogkubewaredev-pgbouncerbinding-editor appscode/catalogkubewaredev-pgbouncerbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubewaredev-pgbouncerbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogkubewaredev-pgbouncerbinding-editor appscode/catalogkubewaredev-pgbouncerbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerBinding Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `catalogkubewaredev-pgbouncerbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-pgbouncerbinding-editor appscode/catalogkubewaredev-pgbouncerbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubewaredev-pgbouncerbinding-editor appscode/catalogkubewaredev-pgbouncerbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PgBouncerBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-pgbouncerbinding-editor appscode/catalogkubewaredev-pgbouncerbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-pgbouncerbinding-editor appscode/catalogkubewaredev-pgbouncerbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-pgbouncerbinding-editor appscode/catalogkubewaredev-pgbouncerbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-pgbouncerbinding-editor appscode/catalogkubewaredev-pgbouncerbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-postgresbinding-editor/Chart.yaml b/charts/catalogkubewaredev-postgresbinding-editor/Chart.yaml index b0e486c9f0..004e188a2f 100644 --- a/charts/catalogkubewaredev-postgresbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-postgresbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"postgresbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PostgresBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-postgresbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubewaredev-postgresbinding-editor/README.md b/charts/catalogkubewaredev-postgresbinding-editor/README.md index e52e9f6252..b4af23e673 100644 --- a/charts/catalogkubewaredev-postgresbinding-editor/README.md +++ b/charts/catalogkubewaredev-postgresbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-postgresbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogkubewaredev-postgresbinding-editor appscode/catalogkubewaredev-postgresbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubewaredev-postgresbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogkubewaredev-postgresbinding-editor appscode/catalogkubewaredev-postgresbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresBinding Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogkubewaredev-postgresbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-postgresbinding-editor appscode/catalogkubewaredev-postgresbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubewaredev-postgresbinding-editor appscode/catalogkubewaredev-postgresbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PostgresBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-postgresbinding-editor appscode/catalogkubewaredev-postgresbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-postgresbinding-editor appscode/catalogkubewaredev-postgresbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-postgresbinding-editor appscode/catalogkubewaredev-postgresbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-postgresbinding-editor appscode/catalogkubewaredev-postgresbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-proxysqlbinding-editor/Chart.yaml b/charts/catalogkubewaredev-proxysqlbinding-editor/Chart.yaml index fd41b17a56..112cbfce29 100644 --- a/charts/catalogkubewaredev-proxysqlbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-proxysqlbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"proxysqlbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProxySQLBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-proxysqlbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubewaredev-proxysqlbinding-editor/README.md b/charts/catalogkubewaredev-proxysqlbinding-editor/README.md index dfd0dcb755..9ac5568327 100644 --- a/charts/catalogkubewaredev-proxysqlbinding-editor/README.md +++ b/charts/catalogkubewaredev-proxysqlbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-proxysqlbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogkubewaredev-proxysqlbinding-editor appscode/catalogkubewaredev-proxysqlbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubewaredev-proxysqlbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogkubewaredev-proxysqlbinding-editor appscode/catalogkubewaredev-proxysqlbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQLBinding Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `catalogkubewaredev-proxysqlbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-proxysqlbinding-editor appscode/catalogkubewaredev-proxysqlbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubewaredev-proxysqlbinding-editor appscode/catalogkubewaredev-proxysqlbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProxySQLBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-proxysqlbinding-editor appscode/catalogkubewaredev-proxysqlbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-proxysqlbinding-editor appscode/catalogkubewaredev-proxysqlbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-proxysqlbinding-editor appscode/catalogkubewaredev-proxysqlbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-proxysqlbinding-editor appscode/catalogkubewaredev-proxysqlbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/catalogkubewaredev-redisbinding-editor/Chart.yaml b/charts/catalogkubewaredev-redisbinding-editor/Chart.yaml index 24a285edb3..a010a6bd51 100644 --- a/charts/catalogkubewaredev-redisbinding-editor/Chart.yaml +++ b/charts/catalogkubewaredev-redisbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"catalog.kubeware.dev","version":"v1alpha1","resource":"redisbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisBinding Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: catalogkubewaredev-redisbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/catalogkubewaredev-redisbinding-editor/README.md b/charts/catalogkubewaredev-redisbinding-editor/README.md index 28b66b993e..5f3d49ff53 100644 --- a/charts/catalogkubewaredev-redisbinding-editor/README.md +++ b/charts/catalogkubewaredev-redisbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/catalogkubewaredev-redisbinding-editor --version=v0.23.0 -$ helm upgrade -i catalogkubewaredev-redisbinding-editor appscode/catalogkubewaredev-redisbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/catalogkubewaredev-redisbinding-editor --version=v0.24.0 +$ helm upgrade -i catalogkubewaredev-redisbinding-editor appscode/catalogkubewaredev-redisbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `catalogkubewaredev-redisbinding-editor`: ```bash -$ helm upgrade -i catalogkubewaredev-redisbinding-editor appscode/catalogkubewaredev-redisbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i catalogkubewaredev-redisbinding-editor appscode/catalogkubewaredev-redisbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `catalogkubewaredev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i catalogkubewaredev-redisbinding-editor appscode/catalogkubewaredev-redisbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 +$ helm upgrade -i catalogkubewaredev-redisbinding-editor appscode/catalogkubewaredev-redisbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=catalog.kubeware.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i catalogkubewaredev-redisbinding-editor appscode/catalogkubewaredev-redisbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i catalogkubewaredev-redisbinding-editor appscode/catalogkubewaredev-redisbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/certificatesk8sio-certificatesigningrequest-editor/Chart.yaml b/charts/certificatesk8sio-certificatesigningrequest-editor/Chart.yaml index 6fe59ac997..7e81d7e331 100644 --- a/charts/certificatesk8sio-certificatesigningrequest-editor/Chart.yaml +++ b/charts/certificatesk8sio-certificatesigningrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"certificates.k8s.io","version":"v1","resource":"certificatesigningrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: CertificateSigningRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: certificatesk8sio-certificatesigningrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/certificatesk8sio-certificatesigningrequest-editor/README.md b/charts/certificatesk8sio-certificatesigningrequest-editor/README.md index 88010fbc0d..6e07e13750 100644 --- a/charts/certificatesk8sio-certificatesigningrequest-editor/README.md +++ b/charts/certificatesk8sio-certificatesigningrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/certificatesk8sio-certificatesigningrequest-editor --version=v0.23.0 -$ helm upgrade -i certificatesk8sio-certificatesigningrequest-editor appscode/certificatesk8sio-certificatesigningrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/certificatesk8sio-certificatesigningrequest-editor --version=v0.24.0 +$ helm upgrade -i certificatesk8sio-certificatesigningrequest-editor appscode/certificatesk8sio-certificatesigningrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CertificateSigningRequest Editor on a [Kubernetes](http://k To install/upgrade the chart with the release name `certificatesk8sio-certificatesigningrequest-editor`: ```bash -$ helm upgrade -i certificatesk8sio-certificatesigningrequest-editor appscode/certificatesk8sio-certificatesigningrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i certificatesk8sio-certificatesigningrequest-editor appscode/certificatesk8sio-certificatesigningrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a CertificateSigningRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `certificatesk8sio- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i certificatesk8sio-certificatesigningrequest-editor appscode/certificatesk8sio-certificatesigningrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=certificates.k8s.io/v1 +$ helm upgrade -i certificatesk8sio-certificatesigningrequest-editor appscode/certificatesk8sio-certificatesigningrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=certificates.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i certificatesk8sio-certificatesigningrequest-editor appscode/certificatesk8sio-certificatesigningrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i certificatesk8sio-certificatesigningrequest-editor appscode/certificatesk8sio-certificatesigningrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/certmanagerio-certificate-editor/Chart.yaml b/charts/certmanagerio-certificate-editor/Chart.yaml index b60d7a7c9b..e5e73c869d 100644 --- a/charts/certmanagerio-certificate-editor/Chart.yaml +++ b/charts/certmanagerio-certificate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cert-manager.io","version":"v1","resource":"certificates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Certificate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: certmanagerio-certificate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/certmanagerio-certificate-editor/README.md b/charts/certmanagerio-certificate-editor/README.md index 75c80b6d2b..040c997521 100644 --- a/charts/certmanagerio-certificate-editor/README.md +++ b/charts/certmanagerio-certificate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/certmanagerio-certificate-editor --version=v0.23.0 -$ helm upgrade -i certmanagerio-certificate-editor appscode/certmanagerio-certificate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/certmanagerio-certificate-editor --version=v0.24.0 +$ helm upgrade -i certmanagerio-certificate-editor appscode/certmanagerio-certificate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Certificate Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `certmanagerio-certificate-editor`: ```bash -$ helm upgrade -i certmanagerio-certificate-editor appscode/certmanagerio-certificate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i certmanagerio-certificate-editor appscode/certmanagerio-certificate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Certificate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `certmanagerio-cert Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i certmanagerio-certificate-editor appscode/certmanagerio-certificate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cert-manager.io/v1 +$ helm upgrade -i certmanagerio-certificate-editor appscode/certmanagerio-certificate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cert-manager.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i certmanagerio-certificate-editor appscode/certmanagerio-certificate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i certmanagerio-certificate-editor appscode/certmanagerio-certificate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/certmanagerio-certificaterequest-editor/Chart.yaml b/charts/certmanagerio-certificaterequest-editor/Chart.yaml index 471fd7cc42..7a52eb7f8d 100644 --- a/charts/certmanagerio-certificaterequest-editor/Chart.yaml +++ b/charts/certmanagerio-certificaterequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cert-manager.io","version":"v1","resource":"certificaterequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: CertificateRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: certmanagerio-certificaterequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/certmanagerio-certificaterequest-editor/README.md b/charts/certmanagerio-certificaterequest-editor/README.md index a3181145d4..c590558e65 100644 --- a/charts/certmanagerio-certificaterequest-editor/README.md +++ b/charts/certmanagerio-certificaterequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/certmanagerio-certificaterequest-editor --version=v0.23.0 -$ helm upgrade -i certmanagerio-certificaterequest-editor appscode/certmanagerio-certificaterequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/certmanagerio-certificaterequest-editor --version=v0.24.0 +$ helm upgrade -i certmanagerio-certificaterequest-editor appscode/certmanagerio-certificaterequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CertificateRequest Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `certmanagerio-certificaterequest-editor`: ```bash -$ helm upgrade -i certmanagerio-certificaterequest-editor appscode/certmanagerio-certificaterequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i certmanagerio-certificaterequest-editor appscode/certmanagerio-certificaterequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a CertificateRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `certmanagerio-cert Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i certmanagerio-certificaterequest-editor appscode/certmanagerio-certificaterequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cert-manager.io/v1 +$ helm upgrade -i certmanagerio-certificaterequest-editor appscode/certmanagerio-certificaterequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cert-manager.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i certmanagerio-certificaterequest-editor appscode/certmanagerio-certificaterequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i certmanagerio-certificaterequest-editor appscode/certmanagerio-certificaterequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/certmanagerio-clusterissuer-editor/Chart.yaml b/charts/certmanagerio-clusterissuer-editor/Chart.yaml index f83a7d933a..949e95e155 100644 --- a/charts/certmanagerio-clusterissuer-editor/Chart.yaml +++ b/charts/certmanagerio-clusterissuer-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cert-manager.io","version":"v1","resource":"clusterissuers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterIssuer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: certmanagerio-clusterissuer-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/certmanagerio-clusterissuer-editor/README.md b/charts/certmanagerio-clusterissuer-editor/README.md index 0107e0c198..4a98c0fb47 100644 --- a/charts/certmanagerio-clusterissuer-editor/README.md +++ b/charts/certmanagerio-clusterissuer-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/certmanagerio-clusterissuer-editor --version=v0.23.0 -$ helm upgrade -i certmanagerio-clusterissuer-editor appscode/certmanagerio-clusterissuer-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/certmanagerio-clusterissuer-editor --version=v0.24.0 +$ helm upgrade -i certmanagerio-clusterissuer-editor appscode/certmanagerio-clusterissuer-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterIssuer Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `certmanagerio-clusterissuer-editor`: ```bash -$ helm upgrade -i certmanagerio-clusterissuer-editor appscode/certmanagerio-clusterissuer-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i certmanagerio-clusterissuer-editor appscode/certmanagerio-clusterissuer-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterIssuer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `certmanagerio-clus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i certmanagerio-clusterissuer-editor appscode/certmanagerio-clusterissuer-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cert-manager.io/v1 +$ helm upgrade -i certmanagerio-clusterissuer-editor appscode/certmanagerio-clusterissuer-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cert-manager.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i certmanagerio-clusterissuer-editor appscode/certmanagerio-clusterissuer-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i certmanagerio-clusterissuer-editor appscode/certmanagerio-clusterissuer-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/certmanagerio-issuer-editor/Chart.yaml b/charts/certmanagerio-issuer-editor/Chart.yaml index 1abab71c22..4872960c94 100644 --- a/charts/certmanagerio-issuer-editor/Chart.yaml +++ b/charts/certmanagerio-issuer-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cert-manager.io","version":"v1","resource":"issuers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Issuer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: certmanagerio-issuer-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/certmanagerio-issuer-editor/README.md b/charts/certmanagerio-issuer-editor/README.md index 5ea6a81812..1b07b616a6 100644 --- a/charts/certmanagerio-issuer-editor/README.md +++ b/charts/certmanagerio-issuer-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/certmanagerio-issuer-editor --version=v0.23.0 -$ helm upgrade -i certmanagerio-issuer-editor appscode/certmanagerio-issuer-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/certmanagerio-issuer-editor --version=v0.24.0 +$ helm upgrade -i certmanagerio-issuer-editor appscode/certmanagerio-issuer-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Issuer Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `certmanagerio-issuer-editor`: ```bash -$ helm upgrade -i certmanagerio-issuer-editor appscode/certmanagerio-issuer-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i certmanagerio-issuer-editor appscode/certmanagerio-issuer-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Issuer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `certmanagerio-issu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i certmanagerio-issuer-editor appscode/certmanagerio-issuer-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cert-manager.io/v1 +$ helm upgrade -i certmanagerio-issuer-editor appscode/certmanagerio-issuer-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cert-manager.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i certmanagerio-issuer-editor appscode/certmanagerio-issuer-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i certmanagerio-issuer-editor appscode/certmanagerio-issuer-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/chartsxhelmdev-chartpreset-editor/Chart.yaml b/charts/chartsxhelmdev-chartpreset-editor/Chart.yaml index 1c7d75779d..7c47782541 100644 --- a/charts/chartsxhelmdev-chartpreset-editor/Chart.yaml +++ b/charts/chartsxhelmdev-chartpreset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"charts.x-helm.dev","version":"v1alpha1","resource":"chartpresets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ChartPreset Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: chartsxhelmdev-chartpreset-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/chartsxhelmdev-chartpreset-editor/README.md b/charts/chartsxhelmdev-chartpreset-editor/README.md index 5e95fffdb8..b53d5d2f6e 100644 --- a/charts/chartsxhelmdev-chartpreset-editor/README.md +++ b/charts/chartsxhelmdev-chartpreset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/chartsxhelmdev-chartpreset-editor --version=v0.23.0 -$ helm upgrade -i chartsxhelmdev-chartpreset-editor appscode/chartsxhelmdev-chartpreset-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/chartsxhelmdev-chartpreset-editor --version=v0.24.0 +$ helm upgrade -i chartsxhelmdev-chartpreset-editor appscode/chartsxhelmdev-chartpreset-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ChartPreset Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `chartsxhelmdev-chartpreset-editor`: ```bash -$ helm upgrade -i chartsxhelmdev-chartpreset-editor appscode/chartsxhelmdev-chartpreset-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i chartsxhelmdev-chartpreset-editor appscode/chartsxhelmdev-chartpreset-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ChartPreset Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `chartsxhelmdev-cha Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i chartsxhelmdev-chartpreset-editor appscode/chartsxhelmdev-chartpreset-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=charts.x-helm.dev/v1alpha1 +$ helm upgrade -i chartsxhelmdev-chartpreset-editor appscode/chartsxhelmdev-chartpreset-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=charts.x-helm.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i chartsxhelmdev-chartpreset-editor appscode/chartsxhelmdev-chartpreset-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i chartsxhelmdev-chartpreset-editor appscode/chartsxhelmdev-chartpreset-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/chartsxhelmdev-clusterchartpreset-editor-options/Chart.yaml b/charts/chartsxhelmdev-clusterchartpreset-editor-options/Chart.yaml index c7d39c716f..932992cfbb 100644 --- a/charts/chartsxhelmdev-clusterchartpreset-editor-options/Chart.yaml +++ b/charts/chartsxhelmdev-clusterchartpreset-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: chartsxhelmdev-clusterchartpreset-editor-options description: ClusterChartPresets Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/chartsxhelmdev-clusterchartpreset-editor-options/README.md b/charts/chartsxhelmdev-clusterchartpreset-editor-options/README.md index 3f8129b342..52e484d066 100644 --- a/charts/chartsxhelmdev-clusterchartpreset-editor-options/README.md +++ b/charts/chartsxhelmdev-clusterchartpreset-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/chartsxhelmdev-clusterchartpreset-editor-options --version=v0.23.0 -$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor-options appscode/chartsxhelmdev-clusterchartpreset-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/chartsxhelmdev-clusterchartpreset-editor-options --version=v0.24.0 +$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor-options appscode/chartsxhelmdev-clusterchartpreset-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys A ClusterChartPresets Editor UI Options on a [Kubernetes](htt To install/upgrade the chart with the release name `chartsxhelmdev-clusterchartpreset-editor-options`: ```bash -$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor-options appscode/chartsxhelmdev-clusterchartpreset-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor-options appscode/chartsxhelmdev-clusterchartpreset-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys A ClusterChartPresets Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -128,12 +128,12 @@ The following table lists the configurable parameters of the `chartsxhelmdev-clu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor-options appscode/chartsxhelmdev-clusterchartpreset-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=charts.x-helm.dev +$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor-options appscode/chartsxhelmdev-clusterchartpreset-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=charts.x-helm.dev ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor-options appscode/chartsxhelmdev-clusterchartpreset-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor-options appscode/chartsxhelmdev-clusterchartpreset-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/chartsxhelmdev-clusterchartpreset-editor-options/ui/create-ui.yaml b/charts/chartsxhelmdev-clusterchartpreset-editor-options/ui/create-ui.yaml index 28106804d8..34df81bed1 100644 --- a/charts/chartsxhelmdev-clusterchartpreset-editor-options/ui/create-ui.yaml +++ b/charts/chartsxhelmdev-clusterchartpreset-editor-options/ui/create-ui.yaml @@ -1925,7 +1925,7 @@ steps: - alias: reusable_stash-presets chart: name: uibytebuildersdev-component-stash-presets - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/spec/properties/backup/properties/kubestash diff --git a/charts/chartsxhelmdev-clusterchartpreset-editor/Chart.yaml b/charts/chartsxhelmdev-clusterchartpreset-editor/Chart.yaml index 6930cd7855..8f5b6809fd 100644 --- a/charts/chartsxhelmdev-clusterchartpreset-editor/Chart.yaml +++ b/charts/chartsxhelmdev-clusterchartpreset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"charts.x-helm.dev","version":"v1alpha1","resource":"clusterchartpresets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterChartPreset Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: chartsxhelmdev-clusterchartpreset-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/chartsxhelmdev-clusterchartpreset-editor/README.md b/charts/chartsxhelmdev-clusterchartpreset-editor/README.md index 06be2e9a73..40fa9e5a13 100644 --- a/charts/chartsxhelmdev-clusterchartpreset-editor/README.md +++ b/charts/chartsxhelmdev-clusterchartpreset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/chartsxhelmdev-clusterchartpreset-editor --version=v0.23.0 -$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor appscode/chartsxhelmdev-clusterchartpreset-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/chartsxhelmdev-clusterchartpreset-editor --version=v0.24.0 +$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor appscode/chartsxhelmdev-clusterchartpreset-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterChartPreset Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `chartsxhelmdev-clusterchartpreset-editor`: ```bash -$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor appscode/chartsxhelmdev-clusterchartpreset-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor appscode/chartsxhelmdev-clusterchartpreset-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterChartPreset Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `chartsxhelmdev-clu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor appscode/chartsxhelmdev-clusterchartpreset-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=charts.x-helm.dev/v1alpha1 +$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor appscode/chartsxhelmdev-clusterchartpreset-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=charts.x-helm.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor appscode/chartsxhelmdev-clusterchartpreset-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i chartsxhelmdev-clusterchartpreset-editor appscode/chartsxhelmdev-clusterchartpreset-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/clusteropenclustermanagementio-addonplacementscore-editor/Chart.yaml b/charts/clusteropenclustermanagementio-addonplacementscore-editor/Chart.yaml index a6c9518879..57489b49d9 100644 --- a/charts/clusteropenclustermanagementio-addonplacementscore-editor/Chart.yaml +++ b/charts/clusteropenclustermanagementio-addonplacementscore-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.open-cluster-management.io","version":"v1alpha1","resource":"addonplacementscores"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AddOnPlacementScore Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusteropenclustermanagementio-addonplacementscore-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/clusteropenclustermanagementio-addonplacementscore-editor/README.md b/charts/clusteropenclustermanagementio-addonplacementscore-editor/README.md index 8320a2740d..42eb62e7ad 100644 --- a/charts/clusteropenclustermanagementio-addonplacementscore-editor/README.md +++ b/charts/clusteropenclustermanagementio-addonplacementscore-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusteropenclustermanagementio-addonplacementscore-editor --version=v0.23.0 -$ helm upgrade -i clusteropenclustermanagementio-addonplacementscore-editor appscode/clusteropenclustermanagementio-addonplacementscore-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/clusteropenclustermanagementio-addonplacementscore-editor --version=v0.24.0 +$ helm upgrade -i clusteropenclustermanagementio-addonplacementscore-editor appscode/clusteropenclustermanagementio-addonplacementscore-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AddOnPlacementScore Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `clusteropenclustermanagementio-addonplacementscore-editor`: ```bash -$ helm upgrade -i clusteropenclustermanagementio-addonplacementscore-editor appscode/clusteropenclustermanagementio-addonplacementscore-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i clusteropenclustermanagementio-addonplacementscore-editor appscode/clusteropenclustermanagementio-addonplacementscore-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AddOnPlacementScore Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusteropencluster Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-addonplacementscore-editor appscode/clusteropenclustermanagementio-addonplacementscore-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cluster.open-cluster-management.io/v1alpha1 +$ helm upgrade -i clusteropenclustermanagementio-addonplacementscore-editor appscode/clusteropenclustermanagementio-addonplacementscore-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cluster.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-addonplacementscore-editor appscode/clusteropenclustermanagementio-addonplacementscore-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i clusteropenclustermanagementio-addonplacementscore-editor appscode/clusteropenclustermanagementio-addonplacementscore-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/clusteropenclustermanagementio-clusterclaim-editor/Chart.yaml b/charts/clusteropenclustermanagementio-clusterclaim-editor/Chart.yaml index 3dc45fc565..c8e409f76d 100644 --- a/charts/clusteropenclustermanagementio-clusterclaim-editor/Chart.yaml +++ b/charts/clusteropenclustermanagementio-clusterclaim-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.open-cluster-management.io","version":"v1alpha1","resource":"clusterclaims"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterClaim Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusteropenclustermanagementio-clusterclaim-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/clusteropenclustermanagementio-clusterclaim-editor/README.md b/charts/clusteropenclustermanagementio-clusterclaim-editor/README.md index e06829612d..8d1dbd99b1 100644 --- a/charts/clusteropenclustermanagementio-clusterclaim-editor/README.md +++ b/charts/clusteropenclustermanagementio-clusterclaim-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusteropenclustermanagementio-clusterclaim-editor --version=v0.23.0 -$ helm upgrade -i clusteropenclustermanagementio-clusterclaim-editor appscode/clusteropenclustermanagementio-clusterclaim-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/clusteropenclustermanagementio-clusterclaim-editor --version=v0.24.0 +$ helm upgrade -i clusteropenclustermanagementio-clusterclaim-editor appscode/clusteropenclustermanagementio-clusterclaim-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterClaim Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `clusteropenclustermanagementio-clusterclaim-editor`: ```bash -$ helm upgrade -i clusteropenclustermanagementio-clusterclaim-editor appscode/clusteropenclustermanagementio-clusterclaim-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i clusteropenclustermanagementio-clusterclaim-editor appscode/clusteropenclustermanagementio-clusterclaim-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterClaim Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusteropencluster Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-clusterclaim-editor appscode/clusteropenclustermanagementio-clusterclaim-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cluster.open-cluster-management.io/v1alpha1 +$ helm upgrade -i clusteropenclustermanagementio-clusterclaim-editor appscode/clusteropenclustermanagementio-clusterclaim-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cluster.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-clusterclaim-editor appscode/clusteropenclustermanagementio-clusterclaim-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i clusteropenclustermanagementio-clusterclaim-editor appscode/clusteropenclustermanagementio-clusterclaim-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/clusteropenclustermanagementio-managedcluster-editor/Chart.yaml b/charts/clusteropenclustermanagementio-managedcluster-editor/Chart.yaml index 5b96c50ff1..637ec1b9ce 100644 --- a/charts/clusteropenclustermanagementio-managedcluster-editor/Chart.yaml +++ b/charts/clusteropenclustermanagementio-managedcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.open-cluster-management.io","version":"v1","resource":"managedclusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ManagedCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusteropenclustermanagementio-managedcluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/clusteropenclustermanagementio-managedcluster-editor/README.md b/charts/clusteropenclustermanagementio-managedcluster-editor/README.md index 861dcc5641..0cc2fa819d 100644 --- a/charts/clusteropenclustermanagementio-managedcluster-editor/README.md +++ b/charts/clusteropenclustermanagementio-managedcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusteropenclustermanagementio-managedcluster-editor --version=v0.23.0 -$ helm upgrade -i clusteropenclustermanagementio-managedcluster-editor appscode/clusteropenclustermanagementio-managedcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/clusteropenclustermanagementio-managedcluster-editor --version=v0.24.0 +$ helm upgrade -i clusteropenclustermanagementio-managedcluster-editor appscode/clusteropenclustermanagementio-managedcluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedCluster Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `clusteropenclustermanagementio-managedcluster-editor`: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedcluster-editor appscode/clusteropenclustermanagementio-managedcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i clusteropenclustermanagementio-managedcluster-editor appscode/clusteropenclustermanagementio-managedcluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ManagedCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusteropencluster Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedcluster-editor appscode/clusteropenclustermanagementio-managedcluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cluster.open-cluster-management.io/v1 +$ helm upgrade -i clusteropenclustermanagementio-managedcluster-editor appscode/clusteropenclustermanagementio-managedcluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cluster.open-cluster-management.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedcluster-editor appscode/clusteropenclustermanagementio-managedcluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i clusteropenclustermanagementio-managedcluster-editor appscode/clusteropenclustermanagementio-managedcluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/clusteropenclustermanagementio-managedclusterset-editor/Chart.yaml b/charts/clusteropenclustermanagementio-managedclusterset-editor/Chart.yaml index 8c7c5eeb1c..373682bc16 100644 --- a/charts/clusteropenclustermanagementio-managedclusterset-editor/Chart.yaml +++ b/charts/clusteropenclustermanagementio-managedclusterset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.open-cluster-management.io","version":"v1beta2","resource":"managedclustersets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ManagedClusterSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusteropenclustermanagementio-managedclusterset-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/clusteropenclustermanagementio-managedclusterset-editor/README.md b/charts/clusteropenclustermanagementio-managedclusterset-editor/README.md index 2045e3ca1f..11e524193f 100644 --- a/charts/clusteropenclustermanagementio-managedclusterset-editor/README.md +++ b/charts/clusteropenclustermanagementio-managedclusterset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusteropenclustermanagementio-managedclusterset-editor --version=v0.23.0 -$ helm upgrade -i clusteropenclustermanagementio-managedclusterset-editor appscode/clusteropenclustermanagementio-managedclusterset-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/clusteropenclustermanagementio-managedclusterset-editor --version=v0.24.0 +$ helm upgrade -i clusteropenclustermanagementio-managedclusterset-editor appscode/clusteropenclustermanagementio-managedclusterset-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedClusterSet Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `clusteropenclustermanagementio-managedclusterset-editor`: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedclusterset-editor appscode/clusteropenclustermanagementio-managedclusterset-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i clusteropenclustermanagementio-managedclusterset-editor appscode/clusteropenclustermanagementio-managedclusterset-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ManagedClusterSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusteropencluster Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedclusterset-editor appscode/clusteropenclustermanagementio-managedclusterset-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cluster.open-cluster-management.io/v1beta2 +$ helm upgrade -i clusteropenclustermanagementio-managedclusterset-editor appscode/clusteropenclustermanagementio-managedclusterset-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cluster.open-cluster-management.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedclusterset-editor appscode/clusteropenclustermanagementio-managedclusterset-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i clusteropenclustermanagementio-managedclusterset-editor appscode/clusteropenclustermanagementio-managedclusterset-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/clusteropenclustermanagementio-managedclustersetbinding-editor/Chart.yaml b/charts/clusteropenclustermanagementio-managedclustersetbinding-editor/Chart.yaml index 93af0695e6..a046b9a393 100644 --- a/charts/clusteropenclustermanagementio-managedclustersetbinding-editor/Chart.yaml +++ b/charts/clusteropenclustermanagementio-managedclustersetbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.open-cluster-management.io","version":"v1beta2","resource":"managedclustersetbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ManagedClusterSetBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusteropenclustermanagementio-managedclustersetbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/clusteropenclustermanagementio-managedclustersetbinding-editor/README.md b/charts/clusteropenclustermanagementio-managedclustersetbinding-editor/README.md index 11094cb0eb..9166aceae4 100644 --- a/charts/clusteropenclustermanagementio-managedclustersetbinding-editor/README.md +++ b/charts/clusteropenclustermanagementio-managedclustersetbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusteropenclustermanagementio-managedclustersetbinding-editor --version=v0.23.0 -$ helm upgrade -i clusteropenclustermanagementio-managedclustersetbinding-editor appscode/clusteropenclustermanagementio-managedclustersetbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/clusteropenclustermanagementio-managedclustersetbinding-editor --version=v0.24.0 +$ helm upgrade -i clusteropenclustermanagementio-managedclustersetbinding-editor appscode/clusteropenclustermanagementio-managedclustersetbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedClusterSetBinding Editor on a [Kubernetes](http://ku To install/upgrade the chart with the release name `clusteropenclustermanagementio-managedclustersetbinding-editor`: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedclustersetbinding-editor appscode/clusteropenclustermanagementio-managedclustersetbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i clusteropenclustermanagementio-managedclustersetbinding-editor appscode/clusteropenclustermanagementio-managedclustersetbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ManagedClusterSetBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusteropencluster Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedclustersetbinding-editor appscode/clusteropenclustermanagementio-managedclustersetbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cluster.open-cluster-management.io/v1beta2 +$ helm upgrade -i clusteropenclustermanagementio-managedclustersetbinding-editor appscode/clusteropenclustermanagementio-managedclustersetbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cluster.open-cluster-management.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-managedclustersetbinding-editor appscode/clusteropenclustermanagementio-managedclustersetbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i clusteropenclustermanagementio-managedclustersetbinding-editor appscode/clusteropenclustermanagementio-managedclustersetbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/clusteropenclustermanagementio-placement-editor/Chart.yaml b/charts/clusteropenclustermanagementio-placement-editor/Chart.yaml index 2412813064..ba2d6bb9ee 100644 --- a/charts/clusteropenclustermanagementio-placement-editor/Chart.yaml +++ b/charts/clusteropenclustermanagementio-placement-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.open-cluster-management.io","version":"v1beta1","resource":"placements"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Placement Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusteropenclustermanagementio-placement-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/clusteropenclustermanagementio-placement-editor/README.md b/charts/clusteropenclustermanagementio-placement-editor/README.md index 387384fa39..b68db1063e 100644 --- a/charts/clusteropenclustermanagementio-placement-editor/README.md +++ b/charts/clusteropenclustermanagementio-placement-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusteropenclustermanagementio-placement-editor --version=v0.23.0 -$ helm upgrade -i clusteropenclustermanagementio-placement-editor appscode/clusteropenclustermanagementio-placement-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/clusteropenclustermanagementio-placement-editor --version=v0.24.0 +$ helm upgrade -i clusteropenclustermanagementio-placement-editor appscode/clusteropenclustermanagementio-placement-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Placement Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `clusteropenclustermanagementio-placement-editor`: ```bash -$ helm upgrade -i clusteropenclustermanagementio-placement-editor appscode/clusteropenclustermanagementio-placement-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i clusteropenclustermanagementio-placement-editor appscode/clusteropenclustermanagementio-placement-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Placement Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusteropencluster Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-placement-editor appscode/clusteropenclustermanagementio-placement-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cluster.open-cluster-management.io/v1beta1 +$ helm upgrade -i clusteropenclustermanagementio-placement-editor appscode/clusteropenclustermanagementio-placement-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cluster.open-cluster-management.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-placement-editor appscode/clusteropenclustermanagementio-placement-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i clusteropenclustermanagementio-placement-editor appscode/clusteropenclustermanagementio-placement-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/clusteropenclustermanagementio-placementdecision-editor/Chart.yaml b/charts/clusteropenclustermanagementio-placementdecision-editor/Chart.yaml index 600124829b..eb410905b5 100644 --- a/charts/clusteropenclustermanagementio-placementdecision-editor/Chart.yaml +++ b/charts/clusteropenclustermanagementio-placementdecision-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.open-cluster-management.io","version":"v1beta1","resource":"placementdecisions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PlacementDecision Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusteropenclustermanagementio-placementdecision-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/clusteropenclustermanagementio-placementdecision-editor/README.md b/charts/clusteropenclustermanagementio-placementdecision-editor/README.md index 05dc5627a2..33099733ca 100644 --- a/charts/clusteropenclustermanagementio-placementdecision-editor/README.md +++ b/charts/clusteropenclustermanagementio-placementdecision-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusteropenclustermanagementio-placementdecision-editor --version=v0.23.0 -$ helm upgrade -i clusteropenclustermanagementio-placementdecision-editor appscode/clusteropenclustermanagementio-placementdecision-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/clusteropenclustermanagementio-placementdecision-editor --version=v0.24.0 +$ helm upgrade -i clusteropenclustermanagementio-placementdecision-editor appscode/clusteropenclustermanagementio-placementdecision-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PlacementDecision Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `clusteropenclustermanagementio-placementdecision-editor`: ```bash -$ helm upgrade -i clusteropenclustermanagementio-placementdecision-editor appscode/clusteropenclustermanagementio-placementdecision-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i clusteropenclustermanagementio-placementdecision-editor appscode/clusteropenclustermanagementio-placementdecision-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PlacementDecision Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusteropencluster Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-placementdecision-editor appscode/clusteropenclustermanagementio-placementdecision-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cluster.open-cluster-management.io/v1beta1 +$ helm upgrade -i clusteropenclustermanagementio-placementdecision-editor appscode/clusteropenclustermanagementio-placementdecision-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cluster.open-cluster-management.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusteropenclustermanagementio-placementdecision-editor appscode/clusteropenclustermanagementio-placementdecision-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i clusteropenclustermanagementio-placementdecision-editor appscode/clusteropenclustermanagementio-placementdecision-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/clusterxk8sio-cluster-editor/Chart.yaml b/charts/clusterxk8sio-cluster-editor/Chart.yaml index 19bed6af5c..441237ff70 100644 --- a/charts/clusterxk8sio-cluster-editor/Chart.yaml +++ b/charts/clusterxk8sio-cluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.x-k8s.io","version":"v1beta1","resource":"clusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Cluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusterxk8sio-cluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/clusterxk8sio-cluster-editor/README.md b/charts/clusterxk8sio-cluster-editor/README.md index 2afa54b6c8..233aaa9b80 100644 --- a/charts/clusterxk8sio-cluster-editor/README.md +++ b/charts/clusterxk8sio-cluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusterxk8sio-cluster-editor --version=v0.23.0 -$ helm upgrade -i clusterxk8sio-cluster-editor appscode/clusterxk8sio-cluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/clusterxk8sio-cluster-editor --version=v0.24.0 +$ helm upgrade -i clusterxk8sio-cluster-editor appscode/clusterxk8sio-cluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cluster Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `clusterxk8sio-cluster-editor`: ```bash -$ helm upgrade -i clusterxk8sio-cluster-editor appscode/clusterxk8sio-cluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i clusterxk8sio-cluster-editor appscode/clusterxk8sio-cluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Cluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusterxk8sio-clus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusterxk8sio-cluster-editor appscode/clusterxk8sio-cluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cluster.x-k8s.io/v1beta1 +$ helm upgrade -i clusterxk8sio-cluster-editor appscode/clusterxk8sio-cluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusterxk8sio-cluster-editor appscode/clusterxk8sio-cluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i clusterxk8sio-cluster-editor appscode/clusterxk8sio-cluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/clusterxk8sio-clusterclass-editor/Chart.yaml b/charts/clusterxk8sio-clusterclass-editor/Chart.yaml index 30b3ae9fb4..5bbb17a195 100644 --- a/charts/clusterxk8sio-clusterclass-editor/Chart.yaml +++ b/charts/clusterxk8sio-clusterclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.x-k8s.io","version":"v1beta1","resource":"clusterclasses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusterxk8sio-clusterclass-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/clusterxk8sio-clusterclass-editor/README.md b/charts/clusterxk8sio-clusterclass-editor/README.md index 45e93ad451..e7dd9b35b0 100644 --- a/charts/clusterxk8sio-clusterclass-editor/README.md +++ b/charts/clusterxk8sio-clusterclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusterxk8sio-clusterclass-editor --version=v0.23.0 -$ helm upgrade -i clusterxk8sio-clusterclass-editor appscode/clusterxk8sio-clusterclass-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/clusterxk8sio-clusterclass-editor --version=v0.24.0 +$ helm upgrade -i clusterxk8sio-clusterclass-editor appscode/clusterxk8sio-clusterclass-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterClass Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `clusterxk8sio-clusterclass-editor`: ```bash -$ helm upgrade -i clusterxk8sio-clusterclass-editor appscode/clusterxk8sio-clusterclass-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i clusterxk8sio-clusterclass-editor appscode/clusterxk8sio-clusterclass-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusterxk8sio-clus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusterxk8sio-clusterclass-editor appscode/clusterxk8sio-clusterclass-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cluster.x-k8s.io/v1beta1 +$ helm upgrade -i clusterxk8sio-clusterclass-editor appscode/clusterxk8sio-clusterclass-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusterxk8sio-clusterclass-editor appscode/clusterxk8sio-clusterclass-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i clusterxk8sio-clusterclass-editor appscode/clusterxk8sio-clusterclass-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/clusterxk8sio-machine-editor/Chart.yaml b/charts/clusterxk8sio-machine-editor/Chart.yaml index 2d7940453d..1f2332070b 100644 --- a/charts/clusterxk8sio-machine-editor/Chart.yaml +++ b/charts/clusterxk8sio-machine-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.x-k8s.io","version":"v1beta1","resource":"machines"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Machine Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusterxk8sio-machine-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/clusterxk8sio-machine-editor/README.md b/charts/clusterxk8sio-machine-editor/README.md index 7241a4c7f9..34ccf1b96a 100644 --- a/charts/clusterxk8sio-machine-editor/README.md +++ b/charts/clusterxk8sio-machine-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusterxk8sio-machine-editor --version=v0.23.0 -$ helm upgrade -i clusterxk8sio-machine-editor appscode/clusterxk8sio-machine-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/clusterxk8sio-machine-editor --version=v0.24.0 +$ helm upgrade -i clusterxk8sio-machine-editor appscode/clusterxk8sio-machine-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Machine Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `clusterxk8sio-machine-editor`: ```bash -$ helm upgrade -i clusterxk8sio-machine-editor appscode/clusterxk8sio-machine-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i clusterxk8sio-machine-editor appscode/clusterxk8sio-machine-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Machine Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusterxk8sio-mach Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusterxk8sio-machine-editor appscode/clusterxk8sio-machine-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cluster.x-k8s.io/v1beta1 +$ helm upgrade -i clusterxk8sio-machine-editor appscode/clusterxk8sio-machine-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusterxk8sio-machine-editor appscode/clusterxk8sio-machine-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i clusterxk8sio-machine-editor appscode/clusterxk8sio-machine-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/clusterxk8sio-machinedeployment-editor/Chart.yaml b/charts/clusterxk8sio-machinedeployment-editor/Chart.yaml index 836d315040..08662e0137 100644 --- a/charts/clusterxk8sio-machinedeployment-editor/Chart.yaml +++ b/charts/clusterxk8sio-machinedeployment-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.x-k8s.io","version":"v1beta1","resource":"machinedeployments"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MachineDeployment Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusterxk8sio-machinedeployment-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/clusterxk8sio-machinedeployment-editor/README.md b/charts/clusterxk8sio-machinedeployment-editor/README.md index a29200adc2..bb60a75db1 100644 --- a/charts/clusterxk8sio-machinedeployment-editor/README.md +++ b/charts/clusterxk8sio-machinedeployment-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusterxk8sio-machinedeployment-editor --version=v0.23.0 -$ helm upgrade -i clusterxk8sio-machinedeployment-editor appscode/clusterxk8sio-machinedeployment-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/clusterxk8sio-machinedeployment-editor --version=v0.24.0 +$ helm upgrade -i clusterxk8sio-machinedeployment-editor appscode/clusterxk8sio-machinedeployment-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MachineDeployment Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `clusterxk8sio-machinedeployment-editor`: ```bash -$ helm upgrade -i clusterxk8sio-machinedeployment-editor appscode/clusterxk8sio-machinedeployment-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i clusterxk8sio-machinedeployment-editor appscode/clusterxk8sio-machinedeployment-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MachineDeployment Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusterxk8sio-mach Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusterxk8sio-machinedeployment-editor appscode/clusterxk8sio-machinedeployment-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cluster.x-k8s.io/v1beta1 +$ helm upgrade -i clusterxk8sio-machinedeployment-editor appscode/clusterxk8sio-machinedeployment-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusterxk8sio-machinedeployment-editor appscode/clusterxk8sio-machinedeployment-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i clusterxk8sio-machinedeployment-editor appscode/clusterxk8sio-machinedeployment-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/clusterxk8sio-machinehealthcheck-editor/Chart.yaml b/charts/clusterxk8sio-machinehealthcheck-editor/Chart.yaml index e4ee57947e..b39a55097c 100644 --- a/charts/clusterxk8sio-machinehealthcheck-editor/Chart.yaml +++ b/charts/clusterxk8sio-machinehealthcheck-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.x-k8s.io","version":"v1beta1","resource":"machinehealthchecks"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MachineHealthCheck Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusterxk8sio-machinehealthcheck-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/clusterxk8sio-machinehealthcheck-editor/README.md b/charts/clusterxk8sio-machinehealthcheck-editor/README.md index 9b3faee4b0..b574d32fa6 100644 --- a/charts/clusterxk8sio-machinehealthcheck-editor/README.md +++ b/charts/clusterxk8sio-machinehealthcheck-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusterxk8sio-machinehealthcheck-editor --version=v0.23.0 -$ helm upgrade -i clusterxk8sio-machinehealthcheck-editor appscode/clusterxk8sio-machinehealthcheck-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/clusterxk8sio-machinehealthcheck-editor --version=v0.24.0 +$ helm upgrade -i clusterxk8sio-machinehealthcheck-editor appscode/clusterxk8sio-machinehealthcheck-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MachineHealthCheck Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `clusterxk8sio-machinehealthcheck-editor`: ```bash -$ helm upgrade -i clusterxk8sio-machinehealthcheck-editor appscode/clusterxk8sio-machinehealthcheck-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i clusterxk8sio-machinehealthcheck-editor appscode/clusterxk8sio-machinehealthcheck-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MachineHealthCheck Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusterxk8sio-mach Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusterxk8sio-machinehealthcheck-editor appscode/clusterxk8sio-machinehealthcheck-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cluster.x-k8s.io/v1beta1 +$ helm upgrade -i clusterxk8sio-machinehealthcheck-editor appscode/clusterxk8sio-machinehealthcheck-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusterxk8sio-machinehealthcheck-editor appscode/clusterxk8sio-machinehealthcheck-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i clusterxk8sio-machinehealthcheck-editor appscode/clusterxk8sio-machinehealthcheck-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/clusterxk8sio-machinepool-editor/Chart.yaml b/charts/clusterxk8sio-machinepool-editor/Chart.yaml index edd1bba157..66d14e9315 100644 --- a/charts/clusterxk8sio-machinepool-editor/Chart.yaml +++ b/charts/clusterxk8sio-machinepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.x-k8s.io","version":"v1beta1","resource":"machinepools"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MachinePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusterxk8sio-machinepool-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/clusterxk8sio-machinepool-editor/README.md b/charts/clusterxk8sio-machinepool-editor/README.md index f2b8f2016e..aa7fc755ba 100644 --- a/charts/clusterxk8sio-machinepool-editor/README.md +++ b/charts/clusterxk8sio-machinepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusterxk8sio-machinepool-editor --version=v0.23.0 -$ helm upgrade -i clusterxk8sio-machinepool-editor appscode/clusterxk8sio-machinepool-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/clusterxk8sio-machinepool-editor --version=v0.24.0 +$ helm upgrade -i clusterxk8sio-machinepool-editor appscode/clusterxk8sio-machinepool-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MachinePool Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `clusterxk8sio-machinepool-editor`: ```bash -$ helm upgrade -i clusterxk8sio-machinepool-editor appscode/clusterxk8sio-machinepool-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i clusterxk8sio-machinepool-editor appscode/clusterxk8sio-machinepool-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MachinePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusterxk8sio-mach Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusterxk8sio-machinepool-editor appscode/clusterxk8sio-machinepool-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cluster.x-k8s.io/v1beta1 +$ helm upgrade -i clusterxk8sio-machinepool-editor appscode/clusterxk8sio-machinepool-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusterxk8sio-machinepool-editor appscode/clusterxk8sio-machinepool-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i clusterxk8sio-machinepool-editor appscode/clusterxk8sio-machinepool-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/clusterxk8sio-machineset-editor/Chart.yaml b/charts/clusterxk8sio-machineset-editor/Chart.yaml index c96a7fd3c9..7566de82c4 100644 --- a/charts/clusterxk8sio-machineset-editor/Chart.yaml +++ b/charts/clusterxk8sio-machineset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cluster.x-k8s.io","version":"v1beta1","resource":"machinesets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MachineSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: clusterxk8sio-machineset-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/clusterxk8sio-machineset-editor/README.md b/charts/clusterxk8sio-machineset-editor/README.md index 8a593d1151..c2f282af78 100644 --- a/charts/clusterxk8sio-machineset-editor/README.md +++ b/charts/clusterxk8sio-machineset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/clusterxk8sio-machineset-editor --version=v0.23.0 -$ helm upgrade -i clusterxk8sio-machineset-editor appscode/clusterxk8sio-machineset-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/clusterxk8sio-machineset-editor --version=v0.24.0 +$ helm upgrade -i clusterxk8sio-machineset-editor appscode/clusterxk8sio-machineset-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MachineSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `clusterxk8sio-machineset-editor`: ```bash -$ helm upgrade -i clusterxk8sio-machineset-editor appscode/clusterxk8sio-machineset-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i clusterxk8sio-machineset-editor appscode/clusterxk8sio-machineset-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MachineSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `clusterxk8sio-mach Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i clusterxk8sio-machineset-editor appscode/clusterxk8sio-machineset-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cluster.x-k8s.io/v1beta1 +$ helm upgrade -i clusterxk8sio-machineset-editor appscode/clusterxk8sio-machineset-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i clusterxk8sio-machineset-editor appscode/clusterxk8sio-machineset-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i clusterxk8sio-machineset-editor appscode/clusterxk8sio-machineset-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/computegcpkubedbcom-firewall-editor/Chart.yaml b/charts/computegcpkubedbcom-firewall-editor/Chart.yaml index 1fb39407dc..7fbcc6ab05 100644 --- a/charts/computegcpkubedbcom-firewall-editor/Chart.yaml +++ b/charts/computegcpkubedbcom-firewall-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"compute.gcp.kubedb.com","version":"v1alpha1","resource":"firewalls"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Firewall Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: computegcpkubedbcom-firewall-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/computegcpkubedbcom-firewall-editor/README.md b/charts/computegcpkubedbcom-firewall-editor/README.md index b3271adf90..4083cf3822 100644 --- a/charts/computegcpkubedbcom-firewall-editor/README.md +++ b/charts/computegcpkubedbcom-firewall-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/computegcpkubedbcom-firewall-editor --version=v0.23.0 -$ helm upgrade -i computegcpkubedbcom-firewall-editor appscode/computegcpkubedbcom-firewall-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/computegcpkubedbcom-firewall-editor --version=v0.24.0 +$ helm upgrade -i computegcpkubedbcom-firewall-editor appscode/computegcpkubedbcom-firewall-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Firewall Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `computegcpkubedbcom-firewall-editor`: ```bash -$ helm upgrade -i computegcpkubedbcom-firewall-editor appscode/computegcpkubedbcom-firewall-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i computegcpkubedbcom-firewall-editor appscode/computegcpkubedbcom-firewall-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Firewall Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `computegcpkubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i computegcpkubedbcom-firewall-editor appscode/computegcpkubedbcom-firewall-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=compute.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i computegcpkubedbcom-firewall-editor appscode/computegcpkubedbcom-firewall-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=compute.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i computegcpkubedbcom-firewall-editor appscode/computegcpkubedbcom-firewall-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i computegcpkubedbcom-firewall-editor appscode/computegcpkubedbcom-firewall-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/computegcpkubedbcom-network-editor/Chart.yaml b/charts/computegcpkubedbcom-network-editor/Chart.yaml index de3d7b84d7..4912aaa390 100644 --- a/charts/computegcpkubedbcom-network-editor/Chart.yaml +++ b/charts/computegcpkubedbcom-network-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"compute.gcp.kubedb.com","version":"v1alpha1","resource":"networks"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Network Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: computegcpkubedbcom-network-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/computegcpkubedbcom-network-editor/README.md b/charts/computegcpkubedbcom-network-editor/README.md index e71882e9c4..679282ca3e 100644 --- a/charts/computegcpkubedbcom-network-editor/README.md +++ b/charts/computegcpkubedbcom-network-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/computegcpkubedbcom-network-editor --version=v0.23.0 -$ helm upgrade -i computegcpkubedbcom-network-editor appscode/computegcpkubedbcom-network-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/computegcpkubedbcom-network-editor --version=v0.24.0 +$ helm upgrade -i computegcpkubedbcom-network-editor appscode/computegcpkubedbcom-network-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Network Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `computegcpkubedbcom-network-editor`: ```bash -$ helm upgrade -i computegcpkubedbcom-network-editor appscode/computegcpkubedbcom-network-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i computegcpkubedbcom-network-editor appscode/computegcpkubedbcom-network-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Network Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `computegcpkubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i computegcpkubedbcom-network-editor appscode/computegcpkubedbcom-network-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=compute.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i computegcpkubedbcom-network-editor appscode/computegcpkubedbcom-network-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=compute.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i computegcpkubedbcom-network-editor appscode/computegcpkubedbcom-network-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i computegcpkubedbcom-network-editor appscode/computegcpkubedbcom-network-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/computegcpkubedbcom-networkpeering-editor/Chart.yaml b/charts/computegcpkubedbcom-networkpeering-editor/Chart.yaml index 4498860f95..7cfd1e860c 100644 --- a/charts/computegcpkubedbcom-networkpeering-editor/Chart.yaml +++ b/charts/computegcpkubedbcom-networkpeering-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"compute.gcp.kubedb.com","version":"v1alpha1","resource":"networkpeerings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: NetworkPeering Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: computegcpkubedbcom-networkpeering-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/computegcpkubedbcom-networkpeering-editor/README.md b/charts/computegcpkubedbcom-networkpeering-editor/README.md index 99b6e750d2..a50b4681ca 100644 --- a/charts/computegcpkubedbcom-networkpeering-editor/README.md +++ b/charts/computegcpkubedbcom-networkpeering-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/computegcpkubedbcom-networkpeering-editor --version=v0.23.0 -$ helm upgrade -i computegcpkubedbcom-networkpeering-editor appscode/computegcpkubedbcom-networkpeering-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/computegcpkubedbcom-networkpeering-editor --version=v0.24.0 +$ helm upgrade -i computegcpkubedbcom-networkpeering-editor appscode/computegcpkubedbcom-networkpeering-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a NetworkPeering Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `computegcpkubedbcom-networkpeering-editor`: ```bash -$ helm upgrade -i computegcpkubedbcom-networkpeering-editor appscode/computegcpkubedbcom-networkpeering-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i computegcpkubedbcom-networkpeering-editor appscode/computegcpkubedbcom-networkpeering-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a NetworkPeering Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `computegcpkubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i computegcpkubedbcom-networkpeering-editor appscode/computegcpkubedbcom-networkpeering-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=compute.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i computegcpkubedbcom-networkpeering-editor appscode/computegcpkubedbcom-networkpeering-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=compute.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i computegcpkubedbcom-networkpeering-editor appscode/computegcpkubedbcom-networkpeering-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i computegcpkubedbcom-networkpeering-editor appscode/computegcpkubedbcom-networkpeering-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/configgatekeepersh-config-editor/Chart.yaml b/charts/configgatekeepersh-config-editor/Chart.yaml index dd687d1259..29039d16c9 100644 --- a/charts/configgatekeepersh-config-editor/Chart.yaml +++ b/charts/configgatekeepersh-config-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"config.gatekeeper.sh","version":"v1alpha1","resource":"configs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Config Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: configgatekeepersh-config-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/configgatekeepersh-config-editor/README.md b/charts/configgatekeepersh-config-editor/README.md index 05ca55cd0a..47fb8bfb66 100644 --- a/charts/configgatekeepersh-config-editor/README.md +++ b/charts/configgatekeepersh-config-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/configgatekeepersh-config-editor --version=v0.23.0 -$ helm upgrade -i configgatekeepersh-config-editor appscode/configgatekeepersh-config-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/configgatekeepersh-config-editor --version=v0.24.0 +$ helm upgrade -i configgatekeepersh-config-editor appscode/configgatekeepersh-config-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Config Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `configgatekeepersh-config-editor`: ```bash -$ helm upgrade -i configgatekeepersh-config-editor appscode/configgatekeepersh-config-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i configgatekeepersh-config-editor appscode/configgatekeepersh-config-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Config Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `configgatekeepersh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i configgatekeepersh-config-editor appscode/configgatekeepersh-config-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=config.gatekeeper.sh/v1alpha1 +$ helm upgrade -i configgatekeepersh-config-editor appscode/configgatekeepersh-config-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=config.gatekeeper.sh/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i configgatekeepersh-config-editor appscode/configgatekeepersh-config-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i configgatekeepersh-config-editor appscode/configgatekeepersh-config-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/configgatewayenvoyproxyio-envoyproxy-editor/Chart.yaml b/charts/configgatewayenvoyproxyio-envoyproxy-editor/Chart.yaml index b97057a2e5..f31e8c666a 100644 --- a/charts/configgatewayenvoyproxyio-envoyproxy-editor/Chart.yaml +++ b/charts/configgatewayenvoyproxyio-envoyproxy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"config.gateway.envoyproxy.io","version":"v1alpha1","resource":"envoyproxies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: EnvoyProxy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: configgatewayenvoyproxyio-envoyproxy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/configgatewayenvoyproxyio-envoyproxy-editor/README.md b/charts/configgatewayenvoyproxyio-envoyproxy-editor/README.md index f3bc19b631..631d529d41 100644 --- a/charts/configgatewayenvoyproxyio-envoyproxy-editor/README.md +++ b/charts/configgatewayenvoyproxyio-envoyproxy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/configgatewayenvoyproxyio-envoyproxy-editor --version=v0.23.0 -$ helm upgrade -i configgatewayenvoyproxyio-envoyproxy-editor appscode/configgatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/configgatewayenvoyproxyio-envoyproxy-editor --version=v0.24.0 +$ helm upgrade -i configgatewayenvoyproxyio-envoyproxy-editor appscode/configgatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EnvoyProxy Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `configgatewayenvoyproxyio-envoyproxy-editor`: ```bash -$ helm upgrade -i configgatewayenvoyproxyio-envoyproxy-editor appscode/configgatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i configgatewayenvoyproxyio-envoyproxy-editor appscode/configgatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a EnvoyProxy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `configgatewayenvoy Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i configgatewayenvoyproxyio-envoyproxy-editor appscode/configgatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=config.gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i configgatewayenvoyproxyio-envoyproxy-editor appscode/configgatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=config.gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i configgatewayenvoyproxyio-envoyproxy-editor appscode/configgatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i configgatewayenvoyproxyio-envoyproxy-editor appscode/configgatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor/Chart.yaml b/charts/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor/Chart.yaml index 707fe79c23..2b9014fdd5 100644 --- a/charts/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor/Chart.yaml +++ b/charts/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"config.gateway.open-cluster-management.io","version":"v1alpha1","resource":"clustergatewayconfigurations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterGatewayConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: configgatewayopenclustermanagementio-clustergatewayconfiguration-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor/README.md b/charts/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor/README.md index 014f0dbb55..2911de564e 100644 --- a/charts/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor/README.md +++ b/charts/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor --version=v0.23.0 -$ helm upgrade -i configgatewayopenclustermanagementio-clustergatewayconfiguration-editor appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor --version=v0.24.0 +$ helm upgrade -i configgatewayopenclustermanagementio-clustergatewayconfiguration-editor appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterGatewayConfiguration Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `configgatewayopenclustermanagementio-clustergatewayconfiguration-editor`: ```bash -$ helm upgrade -i configgatewayopenclustermanagementio-clustergatewayconfiguration-editor appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i configgatewayopenclustermanagementio-clustergatewayconfiguration-editor appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterGatewayConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `configgatewayopenc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i configgatewayopenclustermanagementio-clustergatewayconfiguration-editor appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=config.gateway.open-cluster-management.io/v1alpha1 +$ helm upgrade -i configgatewayopenclustermanagementio-clustergatewayconfiguration-editor appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=config.gateway.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i configgatewayopenclustermanagementio-clustergatewayconfiguration-editor appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i configgatewayopenclustermanagementio-clustergatewayconfiguration-editor appscode/configgatewayopenclustermanagementio-clustergatewayconfiguration-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/configvirtualsecretsdev-secretmetadata-editor/Chart.yaml b/charts/configvirtualsecretsdev-secretmetadata-editor/Chart.yaml index ca0138c149..aa63408af6 100644 --- a/charts/configvirtualsecretsdev-secretmetadata-editor/Chart.yaml +++ b/charts/configvirtualsecretsdev-secretmetadata-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"config.virtual-secrets.dev","version":"v1alpha1","resource":"secretmetadatas"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SecretMetadata Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: configvirtualsecretsdev-secretmetadata-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/configvirtualsecretsdev-secretmetadata-editor/README.md b/charts/configvirtualsecretsdev-secretmetadata-editor/README.md index d05c942210..76059e2416 100644 --- a/charts/configvirtualsecretsdev-secretmetadata-editor/README.md +++ b/charts/configvirtualsecretsdev-secretmetadata-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/configvirtualsecretsdev-secretmetadata-editor --version=v0.23.0 -$ helm upgrade -i configvirtualsecretsdev-secretmetadata-editor appscode/configvirtualsecretsdev-secretmetadata-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/configvirtualsecretsdev-secretmetadata-editor --version=v0.24.0 +$ helm upgrade -i configvirtualsecretsdev-secretmetadata-editor appscode/configvirtualsecretsdev-secretmetadata-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecretMetadata Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `configvirtualsecretsdev-secretmetadata-editor`: ```bash -$ helm upgrade -i configvirtualsecretsdev-secretmetadata-editor appscode/configvirtualsecretsdev-secretmetadata-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i configvirtualsecretsdev-secretmetadata-editor appscode/configvirtualsecretsdev-secretmetadata-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SecretMetadata Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `configvirtualsecre Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i configvirtualsecretsdev-secretmetadata-editor appscode/configvirtualsecretsdev-secretmetadata-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=config.virtual-secrets.dev/v1alpha1 +$ helm upgrade -i configvirtualsecretsdev-secretmetadata-editor appscode/configvirtualsecretsdev-secretmetadata-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=config.virtual-secrets.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i configvirtualsecretsdev-secretmetadata-editor appscode/configvirtualsecretsdev-secretmetadata-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i configvirtualsecretsdev-secretmetadata-editor appscode/configvirtualsecretsdev-secretmetadata-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/configvirtualsecretsdev-secretstore-editor/Chart.yaml b/charts/configvirtualsecretsdev-secretstore-editor/Chart.yaml index c12cff5f4b..fcfbb18277 100644 --- a/charts/configvirtualsecretsdev-secretstore-editor/Chart.yaml +++ b/charts/configvirtualsecretsdev-secretstore-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"config.virtual-secrets.dev","version":"v1alpha1","resource":"secretstores"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SecretStore Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: configvirtualsecretsdev-secretstore-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/configvirtualsecretsdev-secretstore-editor/README.md b/charts/configvirtualsecretsdev-secretstore-editor/README.md index 82c78b6f7a..6fe6156c44 100644 --- a/charts/configvirtualsecretsdev-secretstore-editor/README.md +++ b/charts/configvirtualsecretsdev-secretstore-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/configvirtualsecretsdev-secretstore-editor --version=v0.23.0 -$ helm upgrade -i configvirtualsecretsdev-secretstore-editor appscode/configvirtualsecretsdev-secretstore-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/configvirtualsecretsdev-secretstore-editor --version=v0.24.0 +$ helm upgrade -i configvirtualsecretsdev-secretstore-editor appscode/configvirtualsecretsdev-secretstore-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecretStore Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `configvirtualsecretsdev-secretstore-editor`: ```bash -$ helm upgrade -i configvirtualsecretsdev-secretstore-editor appscode/configvirtualsecretsdev-secretstore-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i configvirtualsecretsdev-secretstore-editor appscode/configvirtualsecretsdev-secretstore-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SecretStore Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `configvirtualsecre Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i configvirtualsecretsdev-secretstore-editor appscode/configvirtualsecretsdev-secretstore-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=config.virtual-secrets.dev/v1alpha1 +$ helm upgrade -i configvirtualsecretsdev-secretstore-editor appscode/configvirtualsecretsdev-secretstore-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=config.virtual-secrets.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i configvirtualsecretsdev-secretstore-editor appscode/configvirtualsecretsdev-secretstore-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i configvirtualsecretsdev-secretstore-editor appscode/configvirtualsecretsdev-secretstore-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor/Chart.yaml b/charts/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor/Chart.yaml index cbddfa513e..ac9ea1f4ea 100644 --- a/charts/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor/Chart.yaml +++ b/charts/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"controlplane.cluster.x-k8s.io","version":"v1beta2","resource":"awsmanagedcontrolplanes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AWSManagedControlPlane Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: controlplaneclusterxk8sio-awsmanagedcontrolplane-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor/README.md b/charts/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor/README.md index b2871e66fc..df396333a5 100644 --- a/charts/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor/README.md +++ b/charts/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor --version=v0.23.0 -$ helm upgrade -i controlplaneclusterxk8sio-awsmanagedcontrolplane-editor appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor --version=v0.24.0 +$ helm upgrade -i controlplaneclusterxk8sio-awsmanagedcontrolplane-editor appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSManagedControlPlane Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `controlplaneclusterxk8sio-awsmanagedcontrolplane-editor`: ```bash -$ helm upgrade -i controlplaneclusterxk8sio-awsmanagedcontrolplane-editor appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i controlplaneclusterxk8sio-awsmanagedcontrolplane-editor appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AWSManagedControlPlane Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `controlplanecluste Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i controlplaneclusterxk8sio-awsmanagedcontrolplane-editor appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=controlplane.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i controlplaneclusterxk8sio-awsmanagedcontrolplane-editor appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=controlplane.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i controlplaneclusterxk8sio-awsmanagedcontrolplane-editor appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i controlplaneclusterxk8sio-awsmanagedcontrolplane-editor appscode/controlplaneclusterxk8sio-awsmanagedcontrolplane-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/controlplaneclusterxk8sio-rosacontrolplane-editor/Chart.yaml b/charts/controlplaneclusterxk8sio-rosacontrolplane-editor/Chart.yaml index f1ccbc79b0..ede31099da 100644 --- a/charts/controlplaneclusterxk8sio-rosacontrolplane-editor/Chart.yaml +++ b/charts/controlplaneclusterxk8sio-rosacontrolplane-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"controlplane.cluster.x-k8s.io","version":"v1beta2","resource":"rosacontrolplanes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ROSAControlPlane Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: controlplaneclusterxk8sio-rosacontrolplane-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/controlplaneclusterxk8sio-rosacontrolplane-editor/README.md b/charts/controlplaneclusterxk8sio-rosacontrolplane-editor/README.md index 6dfb70e1b7..3ceb2403f9 100644 --- a/charts/controlplaneclusterxk8sio-rosacontrolplane-editor/README.md +++ b/charts/controlplaneclusterxk8sio-rosacontrolplane-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/controlplaneclusterxk8sio-rosacontrolplane-editor --version=v0.23.0 -$ helm upgrade -i controlplaneclusterxk8sio-rosacontrolplane-editor appscode/controlplaneclusterxk8sio-rosacontrolplane-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/controlplaneclusterxk8sio-rosacontrolplane-editor --version=v0.24.0 +$ helm upgrade -i controlplaneclusterxk8sio-rosacontrolplane-editor appscode/controlplaneclusterxk8sio-rosacontrolplane-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ROSAControlPlane Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `controlplaneclusterxk8sio-rosacontrolplane-editor`: ```bash -$ helm upgrade -i controlplaneclusterxk8sio-rosacontrolplane-editor appscode/controlplaneclusterxk8sio-rosacontrolplane-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i controlplaneclusterxk8sio-rosacontrolplane-editor appscode/controlplaneclusterxk8sio-rosacontrolplane-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ROSAControlPlane Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `controlplanecluste Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i controlplaneclusterxk8sio-rosacontrolplane-editor appscode/controlplaneclusterxk8sio-rosacontrolplane-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=controlplane.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i controlplaneclusterxk8sio-rosacontrolplane-editor appscode/controlplaneclusterxk8sio-rosacontrolplane-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=controlplane.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i controlplaneclusterxk8sio-rosacontrolplane-editor appscode/controlplaneclusterxk8sio-rosacontrolplane-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i controlplaneclusterxk8sio-rosacontrolplane-editor appscode/controlplaneclusterxk8sio-rosacontrolplane-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/coordinationk8sio-lease-editor/Chart.yaml b/charts/coordinationk8sio-lease-editor/Chart.yaml index be97bf5242..c056186256 100644 --- a/charts/coordinationk8sio-lease-editor/Chart.yaml +++ b/charts/coordinationk8sio-lease-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"coordination.k8s.io","version":"v1","resource":"leases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Lease Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: coordinationk8sio-lease-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/coordinationk8sio-lease-editor/README.md b/charts/coordinationk8sio-lease-editor/README.md index e67c1ab613..8c4e9b38e1 100644 --- a/charts/coordinationk8sio-lease-editor/README.md +++ b/charts/coordinationk8sio-lease-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/coordinationk8sio-lease-editor --version=v0.23.0 -$ helm upgrade -i coordinationk8sio-lease-editor appscode/coordinationk8sio-lease-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/coordinationk8sio-lease-editor --version=v0.24.0 +$ helm upgrade -i coordinationk8sio-lease-editor appscode/coordinationk8sio-lease-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Lease Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `coordinationk8sio-lease-editor`: ```bash -$ helm upgrade -i coordinationk8sio-lease-editor appscode/coordinationk8sio-lease-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i coordinationk8sio-lease-editor appscode/coordinationk8sio-lease-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Lease Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `coordinationk8sio- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i coordinationk8sio-lease-editor appscode/coordinationk8sio-lease-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=coordination.k8s.io/v1 +$ helm upgrade -i coordinationk8sio-lease-editor appscode/coordinationk8sio-lease-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=coordination.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i coordinationk8sio-lease-editor appscode/coordinationk8sio-lease-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i coordinationk8sio-lease-editor appscode/coordinationk8sio-lease-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-binding-editor/Chart.yaml b/charts/core-binding-editor/Chart.yaml index 09a160edb3..11b35d4896 100644 --- a/charts/core-binding-editor/Chart.yaml +++ b/charts/core-binding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"bindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Binding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-binding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-binding-editor/README.md b/charts/core-binding-editor/README.md index e32e959910..3d5ee129e4 100644 --- a/charts/core-binding-editor/README.md +++ b/charts/core-binding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-binding-editor --version=v0.23.0 -$ helm upgrade -i core-binding-editor appscode/core-binding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-binding-editor --version=v0.24.0 +$ helm upgrade -i core-binding-editor appscode/core-binding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Binding Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `core-binding-editor`: ```bash -$ helm upgrade -i core-binding-editor appscode/core-binding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-binding-editor appscode/core-binding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Binding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-binding-edito Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-binding-editor appscode/core-binding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-binding-editor appscode/core-binding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-binding-editor appscode/core-binding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-binding-editor appscode/core-binding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-componentstatus-editor/Chart.yaml b/charts/core-componentstatus-editor/Chart.yaml index b2d2919197..07a62f6a18 100644 --- a/charts/core-componentstatus-editor/Chart.yaml +++ b/charts/core-componentstatus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"componentstatuses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ComponentStatus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-componentstatus-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-componentstatus-editor/README.md b/charts/core-componentstatus-editor/README.md index 25b4b7a80e..1f47e64193 100644 --- a/charts/core-componentstatus-editor/README.md +++ b/charts/core-componentstatus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-componentstatus-editor --version=v0.23.0 -$ helm upgrade -i core-componentstatus-editor appscode/core-componentstatus-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-componentstatus-editor --version=v0.24.0 +$ helm upgrade -i core-componentstatus-editor appscode/core-componentstatus-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ComponentStatus Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `core-componentstatus-editor`: ```bash -$ helm upgrade -i core-componentstatus-editor appscode/core-componentstatus-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-componentstatus-editor appscode/core-componentstatus-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ComponentStatus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-componentstat Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-componentstatus-editor appscode/core-componentstatus-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-componentstatus-editor appscode/core-componentstatus-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-componentstatus-editor appscode/core-componentstatus-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-componentstatus-editor appscode/core-componentstatus-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-configmap-editor/Chart.yaml b/charts/core-configmap-editor/Chart.yaml index aa48d1285f..d4b20c27e3 100644 --- a/charts/core-configmap-editor/Chart.yaml +++ b/charts/core-configmap-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"configmaps"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ConfigMap Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-configmap-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-configmap-editor/README.md b/charts/core-configmap-editor/README.md index 6711253edb..d832c1782d 100644 --- a/charts/core-configmap-editor/README.md +++ b/charts/core-configmap-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-configmap-editor --version=v0.23.0 -$ helm upgrade -i core-configmap-editor appscode/core-configmap-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-configmap-editor --version=v0.24.0 +$ helm upgrade -i core-configmap-editor appscode/core-configmap-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ConfigMap Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `core-configmap-editor`: ```bash -$ helm upgrade -i core-configmap-editor appscode/core-configmap-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-configmap-editor appscode/core-configmap-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ConfigMap Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-configmap-edi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-configmap-editor appscode/core-configmap-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-configmap-editor appscode/core-configmap-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-configmap-editor appscode/core-configmap-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-configmap-editor appscode/core-configmap-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-endpoints-editor/Chart.yaml b/charts/core-endpoints-editor/Chart.yaml index 890ea8eccb..8c3396c176 100644 --- a/charts/core-endpoints-editor/Chart.yaml +++ b/charts/core-endpoints-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"endpoints"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Endpoints Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-endpoints-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-endpoints-editor/README.md b/charts/core-endpoints-editor/README.md index 981825e03a..4460a32def 100644 --- a/charts/core-endpoints-editor/README.md +++ b/charts/core-endpoints-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-endpoints-editor --version=v0.23.0 -$ helm upgrade -i core-endpoints-editor appscode/core-endpoints-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-endpoints-editor --version=v0.24.0 +$ helm upgrade -i core-endpoints-editor appscode/core-endpoints-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Endpoints Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `core-endpoints-editor`: ```bash -$ helm upgrade -i core-endpoints-editor appscode/core-endpoints-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-endpoints-editor appscode/core-endpoints-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Endpoints Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-endpoints-edi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-endpoints-editor appscode/core-endpoints-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-endpoints-editor appscode/core-endpoints-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-endpoints-editor appscode/core-endpoints-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-endpoints-editor appscode/core-endpoints-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-ephemeralcontainers-editor/Chart.yaml b/charts/core-ephemeralcontainers-editor/Chart.yaml index 1e88d45bfb..ac7d0d2339 100644 --- a/charts/core-ephemeralcontainers-editor/Chart.yaml +++ b/charts/core-ephemeralcontainers-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"ephemeralcontainers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: EphemeralContainers Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-ephemeralcontainers-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-ephemeralcontainers-editor/README.md b/charts/core-ephemeralcontainers-editor/README.md index e0d442c0bf..f1e33c7903 100644 --- a/charts/core-ephemeralcontainers-editor/README.md +++ b/charts/core-ephemeralcontainers-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-ephemeralcontainers-editor --version=v0.23.0 -$ helm upgrade -i core-ephemeralcontainers-editor appscode/core-ephemeralcontainers-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-ephemeralcontainers-editor --version=v0.24.0 +$ helm upgrade -i core-ephemeralcontainers-editor appscode/core-ephemeralcontainers-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EphemeralContainers Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `core-ephemeralcontainers-editor`: ```bash -$ helm upgrade -i core-ephemeralcontainers-editor appscode/core-ephemeralcontainers-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-ephemeralcontainers-editor appscode/core-ephemeralcontainers-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a EphemeralContainers Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-ephemeralcont Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-ephemeralcontainers-editor appscode/core-ephemeralcontainers-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-ephemeralcontainers-editor appscode/core-ephemeralcontainers-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-ephemeralcontainers-editor appscode/core-ephemeralcontainers-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-ephemeralcontainers-editor appscode/core-ephemeralcontainers-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-event-editor/Chart.yaml b/charts/core-event-editor/Chart.yaml index 6a318da5d2..360e4e00df 100644 --- a/charts/core-event-editor/Chart.yaml +++ b/charts/core-event-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"events"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Event Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-event-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-event-editor/README.md b/charts/core-event-editor/README.md index 2d4eb8d151..a5770dd2dc 100644 --- a/charts/core-event-editor/README.md +++ b/charts/core-event-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-event-editor --version=v0.23.0 -$ helm upgrade -i core-event-editor appscode/core-event-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-event-editor --version=v0.24.0 +$ helm upgrade -i core-event-editor appscode/core-event-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Event Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `core-event-editor`: ```bash -$ helm upgrade -i core-event-editor appscode/core-event-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-event-editor appscode/core-event-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Event Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-event-editor` Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-event-editor appscode/core-event-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-event-editor appscode/core-event-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-event-editor appscode/core-event-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-event-editor appscode/core-event-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-limitrange-editor/Chart.yaml b/charts/core-limitrange-editor/Chart.yaml index b27ba1cdc9..12172b52e0 100644 --- a/charts/core-limitrange-editor/Chart.yaml +++ b/charts/core-limitrange-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"limitranges"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: LimitRange Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-limitrange-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-limitrange-editor/README.md b/charts/core-limitrange-editor/README.md index 37e11077e8..f6f9930be8 100644 --- a/charts/core-limitrange-editor/README.md +++ b/charts/core-limitrange-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-limitrange-editor --version=v0.23.0 -$ helm upgrade -i core-limitrange-editor appscode/core-limitrange-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-limitrange-editor --version=v0.24.0 +$ helm upgrade -i core-limitrange-editor appscode/core-limitrange-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a LimitRange Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `core-limitrange-editor`: ```bash -$ helm upgrade -i core-limitrange-editor appscode/core-limitrange-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-limitrange-editor appscode/core-limitrange-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a LimitRange Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-limitrange-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-limitrange-editor appscode/core-limitrange-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-limitrange-editor appscode/core-limitrange-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-limitrange-editor appscode/core-limitrange-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-limitrange-editor appscode/core-limitrange-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-namespace-editor/Chart.yaml b/charts/core-namespace-editor/Chart.yaml index 5c77414a25..32ed6111af 100644 --- a/charts/core-namespace-editor/Chart.yaml +++ b/charts/core-namespace-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"namespaces"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Namespace Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-namespace-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-namespace-editor/README.md b/charts/core-namespace-editor/README.md index 3764114dd7..8d47576ad1 100644 --- a/charts/core-namespace-editor/README.md +++ b/charts/core-namespace-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-namespace-editor --version=v0.23.0 -$ helm upgrade -i core-namespace-editor appscode/core-namespace-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-namespace-editor --version=v0.24.0 +$ helm upgrade -i core-namespace-editor appscode/core-namespace-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Namespace Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `core-namespace-editor`: ```bash -$ helm upgrade -i core-namespace-editor appscode/core-namespace-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-namespace-editor appscode/core-namespace-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Namespace Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-namespace-edi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-namespace-editor appscode/core-namespace-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-namespace-editor appscode/core-namespace-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-namespace-editor appscode/core-namespace-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-namespace-editor appscode/core-namespace-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-node-editor/Chart.yaml b/charts/core-node-editor/Chart.yaml index ac574b4c7b..3c22569dd2 100644 --- a/charts/core-node-editor/Chart.yaml +++ b/charts/core-node-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"nodes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Node Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-node-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-node-editor/README.md b/charts/core-node-editor/README.md index a7711d3717..8f3a28543e 100644 --- a/charts/core-node-editor/README.md +++ b/charts/core-node-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-node-editor --version=v0.23.0 -$ helm upgrade -i core-node-editor appscode/core-node-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-node-editor --version=v0.24.0 +$ helm upgrade -i core-node-editor appscode/core-node-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Node Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `core-node-editor`: ```bash -$ helm upgrade -i core-node-editor appscode/core-node-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-node-editor appscode/core-node-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Node Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-node-editor` Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-node-editor appscode/core-node-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-node-editor appscode/core-node-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-node-editor appscode/core-node-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-node-editor appscode/core-node-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-persistentvolume-editor/Chart.yaml b/charts/core-persistentvolume-editor/Chart.yaml index ecf4cbfc00..e8e0aaf43d 100644 --- a/charts/core-persistentvolume-editor/Chart.yaml +++ b/charts/core-persistentvolume-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"persistentvolumes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PersistentVolume Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-persistentvolume-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-persistentvolume-editor/README.md b/charts/core-persistentvolume-editor/README.md index 2dc5c0c99f..18bb540325 100644 --- a/charts/core-persistentvolume-editor/README.md +++ b/charts/core-persistentvolume-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-persistentvolume-editor --version=v0.23.0 -$ helm upgrade -i core-persistentvolume-editor appscode/core-persistentvolume-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-persistentvolume-editor --version=v0.24.0 +$ helm upgrade -i core-persistentvolume-editor appscode/core-persistentvolume-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PersistentVolume Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `core-persistentvolume-editor`: ```bash -$ helm upgrade -i core-persistentvolume-editor appscode/core-persistentvolume-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-persistentvolume-editor appscode/core-persistentvolume-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PersistentVolume Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-persistentvol Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-persistentvolume-editor appscode/core-persistentvolume-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-persistentvolume-editor appscode/core-persistentvolume-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-persistentvolume-editor appscode/core-persistentvolume-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-persistentvolume-editor appscode/core-persistentvolume-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-persistentvolumeclaim-editor/Chart.yaml b/charts/core-persistentvolumeclaim-editor/Chart.yaml index 7a2bce0492..4b8ce5479d 100644 --- a/charts/core-persistentvolumeclaim-editor/Chart.yaml +++ b/charts/core-persistentvolumeclaim-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"persistentvolumeclaims"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PersistentVolumeClaim Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-persistentvolumeclaim-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-persistentvolumeclaim-editor/README.md b/charts/core-persistentvolumeclaim-editor/README.md index 89a1e61834..c6019333a1 100644 --- a/charts/core-persistentvolumeclaim-editor/README.md +++ b/charts/core-persistentvolumeclaim-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-persistentvolumeclaim-editor --version=v0.23.0 -$ helm upgrade -i core-persistentvolumeclaim-editor appscode/core-persistentvolumeclaim-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-persistentvolumeclaim-editor --version=v0.24.0 +$ helm upgrade -i core-persistentvolumeclaim-editor appscode/core-persistentvolumeclaim-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PersistentVolumeClaim Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `core-persistentvolumeclaim-editor`: ```bash -$ helm upgrade -i core-persistentvolumeclaim-editor appscode/core-persistentvolumeclaim-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-persistentvolumeclaim-editor appscode/core-persistentvolumeclaim-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PersistentVolumeClaim Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-persistentvol Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-persistentvolumeclaim-editor appscode/core-persistentvolumeclaim-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-persistentvolumeclaim-editor appscode/core-persistentvolumeclaim-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-persistentvolumeclaim-editor appscode/core-persistentvolumeclaim-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-persistentvolumeclaim-editor appscode/core-persistentvolumeclaim-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-pod-editor/Chart.yaml b/charts/core-pod-editor/Chart.yaml index 31762d1078..52a508433c 100644 --- a/charts/core-pod-editor/Chart.yaml +++ b/charts/core-pod-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"pods"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Pod Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-pod-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-pod-editor/README.md b/charts/core-pod-editor/README.md index 1fe17f4d70..6dfa38f369 100644 --- a/charts/core-pod-editor/README.md +++ b/charts/core-pod-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-pod-editor --version=v0.23.0 -$ helm upgrade -i core-pod-editor appscode/core-pod-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-pod-editor --version=v0.24.0 +$ helm upgrade -i core-pod-editor appscode/core-pod-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Pod Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `core-pod-editor`: ```bash -$ helm upgrade -i core-pod-editor appscode/core-pod-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-pod-editor appscode/core-pod-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Pod Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-pod-editor` c Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-pod-editor appscode/core-pod-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-pod-editor appscode/core-pod-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-pod-editor appscode/core-pod-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-pod-editor appscode/core-pod-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-podstatusresult-editor/Chart.yaml b/charts/core-podstatusresult-editor/Chart.yaml index 458db34ee9..c72e3d7e2d 100644 --- a/charts/core-podstatusresult-editor/Chart.yaml +++ b/charts/core-podstatusresult-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"podstatusresults"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PodStatusResult Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-podstatusresult-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-podstatusresult-editor/README.md b/charts/core-podstatusresult-editor/README.md index c53a781d13..3672ec8b5b 100644 --- a/charts/core-podstatusresult-editor/README.md +++ b/charts/core-podstatusresult-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-podstatusresult-editor --version=v0.23.0 -$ helm upgrade -i core-podstatusresult-editor appscode/core-podstatusresult-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-podstatusresult-editor --version=v0.24.0 +$ helm upgrade -i core-podstatusresult-editor appscode/core-podstatusresult-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PodStatusResult Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `core-podstatusresult-editor`: ```bash -$ helm upgrade -i core-podstatusresult-editor appscode/core-podstatusresult-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-podstatusresult-editor appscode/core-podstatusresult-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PodStatusResult Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-podstatusresu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-podstatusresult-editor appscode/core-podstatusresult-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-podstatusresult-editor appscode/core-podstatusresult-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-podstatusresult-editor appscode/core-podstatusresult-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-podstatusresult-editor appscode/core-podstatusresult-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-rangeallocation-editor/Chart.yaml b/charts/core-rangeallocation-editor/Chart.yaml index 30c949622a..25b84525de 100644 --- a/charts/core-rangeallocation-editor/Chart.yaml +++ b/charts/core-rangeallocation-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"rangeallocations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RangeAllocation Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-rangeallocation-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-rangeallocation-editor/README.md b/charts/core-rangeallocation-editor/README.md index bace8f5236..4471bef516 100644 --- a/charts/core-rangeallocation-editor/README.md +++ b/charts/core-rangeallocation-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-rangeallocation-editor --version=v0.23.0 -$ helm upgrade -i core-rangeallocation-editor appscode/core-rangeallocation-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-rangeallocation-editor --version=v0.24.0 +$ helm upgrade -i core-rangeallocation-editor appscode/core-rangeallocation-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RangeAllocation Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `core-rangeallocation-editor`: ```bash -$ helm upgrade -i core-rangeallocation-editor appscode/core-rangeallocation-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-rangeallocation-editor appscode/core-rangeallocation-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RangeAllocation Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-rangeallocati Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-rangeallocation-editor appscode/core-rangeallocation-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-rangeallocation-editor appscode/core-rangeallocation-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-rangeallocation-editor appscode/core-rangeallocation-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-rangeallocation-editor appscode/core-rangeallocation-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-replicationcontroller-editor/Chart.yaml b/charts/core-replicationcontroller-editor/Chart.yaml index 2c120ac6d7..959febdacc 100644 --- a/charts/core-replicationcontroller-editor/Chart.yaml +++ b/charts/core-replicationcontroller-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"replicationcontrollers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ReplicationController Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-replicationcontroller-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-replicationcontroller-editor/README.md b/charts/core-replicationcontroller-editor/README.md index 0e48bc5719..b2872e1a7e 100644 --- a/charts/core-replicationcontroller-editor/README.md +++ b/charts/core-replicationcontroller-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-replicationcontroller-editor --version=v0.23.0 -$ helm upgrade -i core-replicationcontroller-editor appscode/core-replicationcontroller-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-replicationcontroller-editor --version=v0.24.0 +$ helm upgrade -i core-replicationcontroller-editor appscode/core-replicationcontroller-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ReplicationController Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `core-replicationcontroller-editor`: ```bash -$ helm upgrade -i core-replicationcontroller-editor appscode/core-replicationcontroller-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-replicationcontroller-editor appscode/core-replicationcontroller-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ReplicationController Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-replicationco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-replicationcontroller-editor appscode/core-replicationcontroller-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-replicationcontroller-editor appscode/core-replicationcontroller-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-replicationcontroller-editor appscode/core-replicationcontroller-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-replicationcontroller-editor appscode/core-replicationcontroller-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-resourcequota-editor/Chart.yaml b/charts/core-resourcequota-editor/Chart.yaml index 654e93b3ee..5605b131eb 100644 --- a/charts/core-resourcequota-editor/Chart.yaml +++ b/charts/core-resourcequota-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"resourcequotas"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceQuota Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-resourcequota-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-resourcequota-editor/README.md b/charts/core-resourcequota-editor/README.md index 6b7a017507..c0c168ebf9 100644 --- a/charts/core-resourcequota-editor/README.md +++ b/charts/core-resourcequota-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-resourcequota-editor --version=v0.23.0 -$ helm upgrade -i core-resourcequota-editor appscode/core-resourcequota-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-resourcequota-editor --version=v0.24.0 +$ helm upgrade -i core-resourcequota-editor appscode/core-resourcequota-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceQuota Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `core-resourcequota-editor`: ```bash -$ helm upgrade -i core-resourcequota-editor appscode/core-resourcequota-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-resourcequota-editor appscode/core-resourcequota-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceQuota Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-resourcequota Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-resourcequota-editor appscode/core-resourcequota-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-resourcequota-editor appscode/core-resourcequota-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-resourcequota-editor appscode/core-resourcequota-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-resourcequota-editor appscode/core-resourcequota-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-secret-editor/Chart.yaml b/charts/core-secret-editor/Chart.yaml index f7a2bcf226..307f3e4709 100644 --- a/charts/core-secret-editor/Chart.yaml +++ b/charts/core-secret-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"secrets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Secret Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-secret-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-secret-editor/README.md b/charts/core-secret-editor/README.md index 85062680c5..344df0d2b8 100644 --- a/charts/core-secret-editor/README.md +++ b/charts/core-secret-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-secret-editor --version=v0.23.0 -$ helm upgrade -i core-secret-editor appscode/core-secret-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-secret-editor --version=v0.24.0 +$ helm upgrade -i core-secret-editor appscode/core-secret-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Secret Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `core-secret-editor`: ```bash -$ helm upgrade -i core-secret-editor appscode/core-secret-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-secret-editor appscode/core-secret-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Secret Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-secret-editor Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-secret-editor appscode/core-secret-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-secret-editor appscode/core-secret-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-secret-editor appscode/core-secret-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-secret-editor appscode/core-secret-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-service-editor/Chart.yaml b/charts/core-service-editor/Chart.yaml index f1d9ca330f..3f15fdd976 100644 --- a/charts/core-service-editor/Chart.yaml +++ b/charts/core-service-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"services"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Service Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-service-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-service-editor/README.md b/charts/core-service-editor/README.md index f86aa7e8a7..a265903d29 100644 --- a/charts/core-service-editor/README.md +++ b/charts/core-service-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-service-editor --version=v0.23.0 -$ helm upgrade -i core-service-editor appscode/core-service-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-service-editor --version=v0.24.0 +$ helm upgrade -i core-service-editor appscode/core-service-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Service Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `core-service-editor`: ```bash -$ helm upgrade -i core-service-editor appscode/core-service-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-service-editor appscode/core-service-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Service Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-service-edito Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-service-editor appscode/core-service-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-service-editor appscode/core-service-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-service-editor appscode/core-service-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-service-editor appscode/core-service-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/core-serviceaccount-editor/Chart.yaml b/charts/core-serviceaccount-editor/Chart.yaml index fca61ce910..01d2dacbff 100644 --- a/charts/core-serviceaccount-editor/Chart.yaml +++ b/charts/core-serviceaccount-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"","version":"v1","resource":"serviceaccounts"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ServiceAccount Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: core-serviceaccount-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/core-serviceaccount-editor/README.md b/charts/core-serviceaccount-editor/README.md index a272a6fabc..5f0625f73e 100644 --- a/charts/core-serviceaccount-editor/README.md +++ b/charts/core-serviceaccount-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/core-serviceaccount-editor --version=v0.23.0 -$ helm upgrade -i core-serviceaccount-editor appscode/core-serviceaccount-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/core-serviceaccount-editor --version=v0.24.0 +$ helm upgrade -i core-serviceaccount-editor appscode/core-serviceaccount-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ServiceAccount Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `core-serviceaccount-editor`: ```bash -$ helm upgrade -i core-serviceaccount-editor appscode/core-serviceaccount-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i core-serviceaccount-editor appscode/core-serviceaccount-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ServiceAccount Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `core-serviceaccoun Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i core-serviceaccount-editor appscode/core-serviceaccount-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=v1 +$ helm upgrade -i core-serviceaccount-editor appscode/core-serviceaccount-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i core-serviceaccount-editor appscode/core-serviceaccount-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i core-serviceaccount-editor appscode/core-serviceaccount-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corek8sappscodecom-genericresource-editor/Chart.yaml b/charts/corek8sappscodecom-genericresource-editor/Chart.yaml index cc2b83df02..3e1a8d9e07 100644 --- a/charts/corek8sappscodecom-genericresource-editor/Chart.yaml +++ b/charts/corek8sappscodecom-genericresource-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.k8s.appscode.com","version":"v1alpha1","resource":"genericresources"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GenericResource Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corek8sappscodecom-genericresource-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/corek8sappscodecom-genericresource-editor/README.md b/charts/corek8sappscodecom-genericresource-editor/README.md index 7482fd4d19..72574876fb 100644 --- a/charts/corek8sappscodecom-genericresource-editor/README.md +++ b/charts/corek8sappscodecom-genericresource-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corek8sappscodecom-genericresource-editor --version=v0.23.0 -$ helm upgrade -i corek8sappscodecom-genericresource-editor appscode/corek8sappscodecom-genericresource-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/corek8sappscodecom-genericresource-editor --version=v0.24.0 +$ helm upgrade -i corek8sappscodecom-genericresource-editor appscode/corek8sappscodecom-genericresource-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GenericResource Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `corek8sappscodecom-genericresource-editor`: ```bash -$ helm upgrade -i corek8sappscodecom-genericresource-editor appscode/corek8sappscodecom-genericresource-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i corek8sappscodecom-genericresource-editor appscode/corek8sappscodecom-genericresource-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GenericResource Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corek8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corek8sappscodecom-genericresource-editor appscode/corek8sappscodecom-genericresource-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 +$ helm upgrade -i corek8sappscodecom-genericresource-editor appscode/corek8sappscodecom-genericresource-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corek8sappscodecom-genericresource-editor appscode/corek8sappscodecom-genericresource-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i corek8sappscodecom-genericresource-editor appscode/corek8sappscodecom-genericresource-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corek8sappscodecom-genericresourceservice-editor/Chart.yaml b/charts/corek8sappscodecom-genericresourceservice-editor/Chart.yaml index 080b73d33b..c94245e640 100644 --- a/charts/corek8sappscodecom-genericresourceservice-editor/Chart.yaml +++ b/charts/corek8sappscodecom-genericresourceservice-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.k8s.appscode.com","version":"v1alpha1","resource":"genericresourceservices"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GenericResourceService Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corek8sappscodecom-genericresourceservice-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/corek8sappscodecom-genericresourceservice-editor/README.md b/charts/corek8sappscodecom-genericresourceservice-editor/README.md index 13bbcd5e92..09c29574b1 100644 --- a/charts/corek8sappscodecom-genericresourceservice-editor/README.md +++ b/charts/corek8sappscodecom-genericresourceservice-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corek8sappscodecom-genericresourceservice-editor --version=v0.23.0 -$ helm upgrade -i corek8sappscodecom-genericresourceservice-editor appscode/corek8sappscodecom-genericresourceservice-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/corek8sappscodecom-genericresourceservice-editor --version=v0.24.0 +$ helm upgrade -i corek8sappscodecom-genericresourceservice-editor appscode/corek8sappscodecom-genericresourceservice-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GenericResourceService Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `corek8sappscodecom-genericresourceservice-editor`: ```bash -$ helm upgrade -i corek8sappscodecom-genericresourceservice-editor appscode/corek8sappscodecom-genericresourceservice-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i corek8sappscodecom-genericresourceservice-editor appscode/corek8sappscodecom-genericresourceservice-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GenericResourceService Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corek8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corek8sappscodecom-genericresourceservice-editor appscode/corek8sappscodecom-genericresourceservice-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 +$ helm upgrade -i corek8sappscodecom-genericresourceservice-editor appscode/corek8sappscodecom-genericresourceservice-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corek8sappscodecom-genericresourceservice-editor appscode/corek8sappscodecom-genericresourceservice-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i corek8sappscodecom-genericresourceservice-editor appscode/corek8sappscodecom-genericresourceservice-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corek8sappscodecom-podview-editor/Chart.yaml b/charts/corek8sappscodecom-podview-editor/Chart.yaml index aad525fdcc..3ea42f2ad1 100644 --- a/charts/corek8sappscodecom-podview-editor/Chart.yaml +++ b/charts/corek8sappscodecom-podview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.k8s.appscode.com","version":"v1alpha1","resource":"podviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PodView Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corek8sappscodecom-podview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/corek8sappscodecom-podview-editor/README.md b/charts/corek8sappscodecom-podview-editor/README.md index dc16ecd023..db22f586c4 100644 --- a/charts/corek8sappscodecom-podview-editor/README.md +++ b/charts/corek8sappscodecom-podview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corek8sappscodecom-podview-editor --version=v0.23.0 -$ helm upgrade -i corek8sappscodecom-podview-editor appscode/corek8sappscodecom-podview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/corek8sappscodecom-podview-editor --version=v0.24.0 +$ helm upgrade -i corek8sappscodecom-podview-editor appscode/corek8sappscodecom-podview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PodView Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `corek8sappscodecom-podview-editor`: ```bash -$ helm upgrade -i corek8sappscodecom-podview-editor appscode/corek8sappscodecom-podview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i corek8sappscodecom-podview-editor appscode/corek8sappscodecom-podview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PodView Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corek8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corek8sappscodecom-podview-editor appscode/corek8sappscodecom-podview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 +$ helm upgrade -i corek8sappscodecom-podview-editor appscode/corek8sappscodecom-podview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corek8sappscodecom-podview-editor appscode/corek8sappscodecom-podview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i corek8sappscodecom-podview-editor appscode/corek8sappscodecom-podview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corek8sappscodecom-project-editor/Chart.yaml b/charts/corek8sappscodecom-project-editor/Chart.yaml index df021b4c04..4f0a0b3c1b 100644 --- a/charts/corek8sappscodecom-project-editor/Chart.yaml +++ b/charts/corek8sappscodecom-project-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.k8s.appscode.com","version":"v1alpha1","resource":"projects"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Project Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corek8sappscodecom-project-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/corek8sappscodecom-project-editor/README.md b/charts/corek8sappscodecom-project-editor/README.md index 1013f6ea4b..73793be6f2 100644 --- a/charts/corek8sappscodecom-project-editor/README.md +++ b/charts/corek8sappscodecom-project-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corek8sappscodecom-project-editor --version=v0.23.0 -$ helm upgrade -i corek8sappscodecom-project-editor appscode/corek8sappscodecom-project-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/corek8sappscodecom-project-editor --version=v0.24.0 +$ helm upgrade -i corek8sappscodecom-project-editor appscode/corek8sappscodecom-project-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Project Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `corek8sappscodecom-project-editor`: ```bash -$ helm upgrade -i corek8sappscodecom-project-editor appscode/corek8sappscodecom-project-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i corek8sappscodecom-project-editor appscode/corek8sappscodecom-project-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Project Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corek8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corek8sappscodecom-project-editor appscode/corek8sappscodecom-project-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 +$ helm upgrade -i corek8sappscodecom-project-editor appscode/corek8sappscodecom-project-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corek8sappscodecom-project-editor appscode/corek8sappscodecom-project-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i corek8sappscodecom-project-editor appscode/corek8sappscodecom-project-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corek8sappscodecom-resourcecalculator-editor/Chart.yaml b/charts/corek8sappscodecom-resourcecalculator-editor/Chart.yaml index 6c1db8b548..41316a04cb 100644 --- a/charts/corek8sappscodecom-resourcecalculator-editor/Chart.yaml +++ b/charts/corek8sappscodecom-resourcecalculator-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.k8s.appscode.com","version":"v1alpha1","resource":"resourcecalculators"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceCalculator Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corek8sappscodecom-resourcecalculator-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/corek8sappscodecom-resourcecalculator-editor/README.md b/charts/corek8sappscodecom-resourcecalculator-editor/README.md index a06000e253..107124a1f6 100644 --- a/charts/corek8sappscodecom-resourcecalculator-editor/README.md +++ b/charts/corek8sappscodecom-resourcecalculator-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corek8sappscodecom-resourcecalculator-editor --version=v0.23.0 -$ helm upgrade -i corek8sappscodecom-resourcecalculator-editor appscode/corek8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/corek8sappscodecom-resourcecalculator-editor --version=v0.24.0 +$ helm upgrade -i corek8sappscodecom-resourcecalculator-editor appscode/corek8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceCalculator Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `corek8sappscodecom-resourcecalculator-editor`: ```bash -$ helm upgrade -i corek8sappscodecom-resourcecalculator-editor appscode/corek8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i corek8sappscodecom-resourcecalculator-editor appscode/corek8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceCalculator Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corek8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corek8sappscodecom-resourcecalculator-editor appscode/corek8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 +$ helm upgrade -i corek8sappscodecom-resourcecalculator-editor appscode/corek8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corek8sappscodecom-resourcecalculator-editor appscode/corek8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i corek8sappscodecom-resourcecalculator-editor appscode/corek8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corek8sappscodecom-resourcesummary-editor/Chart.yaml b/charts/corek8sappscodecom-resourcesummary-editor/Chart.yaml index 63a015bc40..e7aad7c94e 100644 --- a/charts/corek8sappscodecom-resourcesummary-editor/Chart.yaml +++ b/charts/corek8sappscodecom-resourcesummary-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.k8s.appscode.com","version":"v1alpha1","resource":"resourcesummaries"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceSummary Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corek8sappscodecom-resourcesummary-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/corek8sappscodecom-resourcesummary-editor/README.md b/charts/corek8sappscodecom-resourcesummary-editor/README.md index 24fc000602..68527fff36 100644 --- a/charts/corek8sappscodecom-resourcesummary-editor/README.md +++ b/charts/corek8sappscodecom-resourcesummary-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corek8sappscodecom-resourcesummary-editor --version=v0.23.0 -$ helm upgrade -i corek8sappscodecom-resourcesummary-editor appscode/corek8sappscodecom-resourcesummary-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/corek8sappscodecom-resourcesummary-editor --version=v0.24.0 +$ helm upgrade -i corek8sappscodecom-resourcesummary-editor appscode/corek8sappscodecom-resourcesummary-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceSummary Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `corek8sappscodecom-resourcesummary-editor`: ```bash -$ helm upgrade -i corek8sappscodecom-resourcesummary-editor appscode/corek8sappscodecom-resourcesummary-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i corek8sappscodecom-resourcesummary-editor appscode/corek8sappscodecom-resourcesummary-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceSummary Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corek8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corek8sappscodecom-resourcesummary-editor appscode/corek8sappscodecom-resourcesummary-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 +$ helm upgrade -i corek8sappscodecom-resourcesummary-editor appscode/corek8sappscodecom-resourcesummary-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=core.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corek8sappscodecom-resourcesummary-editor appscode/corek8sappscodecom-resourcesummary-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i corek8sappscodecom-resourcesummary-editor appscode/corek8sappscodecom-resourcesummary-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-backupbatch-editor/Chart.yaml b/charts/corekubestashcom-backupbatch-editor/Chart.yaml index 2a4d9ef836..9fbfa9bddc 100644 --- a/charts/corekubestashcom-backupbatch-editor/Chart.yaml +++ b/charts/corekubestashcom-backupbatch-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.kubestash.com","version":"v1alpha1","resource":"backupbatches"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: BackupBatch Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corekubestashcom-backupbatch-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/corekubestashcom-backupbatch-editor/README.md b/charts/corekubestashcom-backupbatch-editor/README.md index b188027975..88651cc6ba 100644 --- a/charts/corekubestashcom-backupbatch-editor/README.md +++ b/charts/corekubestashcom-backupbatch-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-backupbatch-editor --version=v0.23.0 -$ helm upgrade -i corekubestashcom-backupbatch-editor appscode/corekubestashcom-backupbatch-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/corekubestashcom-backupbatch-editor --version=v0.24.0 +$ helm upgrade -i corekubestashcom-backupbatch-editor appscode/corekubestashcom-backupbatch-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupBatch Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `corekubestashcom-backupbatch-editor`: ```bash -$ helm upgrade -i corekubestashcom-backupbatch-editor appscode/corekubestashcom-backupbatch-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i corekubestashcom-backupbatch-editor appscode/corekubestashcom-backupbatch-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a BackupBatch Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corekubestashcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-backupbatch-editor appscode/corekubestashcom-backupbatch-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=core.kubestash.com/v1alpha1 +$ helm upgrade -i corekubestashcom-backupbatch-editor appscode/corekubestashcom-backupbatch-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=core.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-backupbatch-editor appscode/corekubestashcom-backupbatch-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i corekubestashcom-backupbatch-editor appscode/corekubestashcom-backupbatch-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-backupblueprint-editor/Chart.yaml b/charts/corekubestashcom-backupblueprint-editor/Chart.yaml index c3db7b8103..126dbce5b8 100644 --- a/charts/corekubestashcom-backupblueprint-editor/Chart.yaml +++ b/charts/corekubestashcom-backupblueprint-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.kubestash.com","version":"v1alpha1","resource":"backupblueprints"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: BackupBlueprint Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corekubestashcom-backupblueprint-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/corekubestashcom-backupblueprint-editor/README.md b/charts/corekubestashcom-backupblueprint-editor/README.md index acf2c3f567..317cafb8fb 100644 --- a/charts/corekubestashcom-backupblueprint-editor/README.md +++ b/charts/corekubestashcom-backupblueprint-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-backupblueprint-editor --version=v0.23.0 -$ helm upgrade -i corekubestashcom-backupblueprint-editor appscode/corekubestashcom-backupblueprint-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/corekubestashcom-backupblueprint-editor --version=v0.24.0 +$ helm upgrade -i corekubestashcom-backupblueprint-editor appscode/corekubestashcom-backupblueprint-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupBlueprint Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `corekubestashcom-backupblueprint-editor`: ```bash -$ helm upgrade -i corekubestashcom-backupblueprint-editor appscode/corekubestashcom-backupblueprint-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i corekubestashcom-backupblueprint-editor appscode/corekubestashcom-backupblueprint-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a BackupBlueprint Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corekubestashcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-backupblueprint-editor appscode/corekubestashcom-backupblueprint-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=core.kubestash.com/v1alpha1 +$ helm upgrade -i corekubestashcom-backupblueprint-editor appscode/corekubestashcom-backupblueprint-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=core.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-backupblueprint-editor appscode/corekubestashcom-backupblueprint-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i corekubestashcom-backupblueprint-editor appscode/corekubestashcom-backupblueprint-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-backupconfiguration-editor-options/Chart.yaml b/charts/corekubestashcom-backupconfiguration-editor-options/Chart.yaml index b12abbc396..20b8dbaf1b 100644 --- a/charts/corekubestashcom-backupconfiguration-editor-options/Chart.yaml +++ b/charts/corekubestashcom-backupconfiguration-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: corekubestashcom-backupconfiguration-editor-options description: BackupConfiguration Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/corekubestashcom-backupconfiguration-editor-options/README.md b/charts/corekubestashcom-backupconfiguration-editor-options/README.md index e8aa17a425..6dac815f2e 100644 --- a/charts/corekubestashcom-backupconfiguration-editor-options/README.md +++ b/charts/corekubestashcom-backupconfiguration-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-backupconfiguration-editor-options --version=v0.23.0 -$ helm upgrade -i kubestashcom-backupconfiguration-editor-options appscode/corekubestashcom-backupconfiguration-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/corekubestashcom-backupconfiguration-editor-options --version=v0.24.0 +$ helm upgrade -i kubestashcom-backupconfiguration-editor-options appscode/corekubestashcom-backupconfiguration-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Backupconfiguration Editor UI Options on a [Kubernetes](htt To install/upgrade the chart with the release name `kubestashcom-backupconfiguration-editor-options`: ```bash -$ helm upgrade -i kubestashcom-backupconfiguration-editor-options appscode/corekubestashcom-backupconfiguration-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubestashcom-backupconfiguration-editor-options appscode/corekubestashcom-backupconfiguration-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Backupconfiguration Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -69,12 +69,12 @@ The following table lists the configurable parameters of the `corekubestashcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubestashcom-backupconfiguration-editor-options appscode/corekubestashcom-backupconfiguration-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=core.kubestash.com +$ helm upgrade -i kubestashcom-backupconfiguration-editor-options appscode/corekubestashcom-backupconfiguration-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=core.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubestashcom-backupconfiguration-editor-options appscode/corekubestashcom-backupconfiguration-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubestashcom-backupconfiguration-editor-options appscode/corekubestashcom-backupconfiguration-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-backupconfiguration-editor/Chart.yaml b/charts/corekubestashcom-backupconfiguration-editor/Chart.yaml index d980b9708a..70251ba209 100644 --- a/charts/corekubestashcom-backupconfiguration-editor/Chart.yaml +++ b/charts/corekubestashcom-backupconfiguration-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: core.kubestash.com\n kind: BackupConfiguration\n\ \ version: v1alpha1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: BackupConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: corekubestashcom-backupconfiguration-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/corekubestashcom-backupconfiguration-editor/README.md b/charts/corekubestashcom-backupconfiguration-editor/README.md index b2312fc740..629cccfe68 100644 --- a/charts/corekubestashcom-backupconfiguration-editor/README.md +++ b/charts/corekubestashcom-backupconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-backupconfiguration-editor --version=v0.23.0 -$ helm upgrade -i corekubestashcom-backupconfiguration-editor appscode/corekubestashcom-backupconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/corekubestashcom-backupconfiguration-editor --version=v0.24.0 +$ helm upgrade -i corekubestashcom-backupconfiguration-editor appscode/corekubestashcom-backupconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupConfiguration Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `corekubestashcom-backupconfiguration-editor`: ```bash -$ helm upgrade -i corekubestashcom-backupconfiguration-editor appscode/corekubestashcom-backupconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i corekubestashcom-backupconfiguration-editor appscode/corekubestashcom-backupconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a BackupConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -60,12 +60,12 @@ The following table lists the configurable parameters of the `corekubestashcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-backupconfiguration-editor appscode/corekubestashcom-backupconfiguration-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=core.kubestash.com +$ helm upgrade -i corekubestashcom-backupconfiguration-editor appscode/corekubestashcom-backupconfiguration-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=core.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-backupconfiguration-editor appscode/corekubestashcom-backupconfiguration-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i corekubestashcom-backupconfiguration-editor appscode/corekubestashcom-backupconfiguration-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-backupsession-editor-options/Chart.yaml b/charts/corekubestashcom-backupsession-editor-options/Chart.yaml index 314f0179d2..93fc610a54 100644 --- a/charts/corekubestashcom-backupsession-editor-options/Chart.yaml +++ b/charts/corekubestashcom-backupsession-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: corekubestashcom-backupsession-editor-options description: KubeStash BackupSession Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/corekubestashcom-backupsession-editor-options/README.md b/charts/corekubestashcom-backupsession-editor-options/README.md index f8d8130994..0b0b050849 100644 --- a/charts/corekubestashcom-backupsession-editor-options/README.md +++ b/charts/corekubestashcom-backupsession-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-backupsession-editor-options --version=v0.23.0 -$ helm upgrade -i corekubestashcom-backupsession-editor-options appscode/corekubestashcom-backupsession-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/corekubestashcom-backupsession-editor-options --version=v0.24.0 +$ helm upgrade -i corekubestashcom-backupsession-editor-options appscode/corekubestashcom-backupsession-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KubeStash BackupSession Editor UI Options on a [Kubernetes] To install/upgrade the chart with the release name `corekubestashcom-backupsession-editor-options`: ```bash -$ helm upgrade -i corekubestashcom-backupsession-editor-options appscode/corekubestashcom-backupsession-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i corekubestashcom-backupsession-editor-options appscode/corekubestashcom-backupsession-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a KubeStash BackupSession Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -67,12 +67,12 @@ The following table lists the configurable parameters of the `corekubestashcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-backupsession-editor-options appscode/corekubestashcom-backupsession-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=core.kubestash.com +$ helm upgrade -i corekubestashcom-backupsession-editor-options appscode/corekubestashcom-backupsession-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=core.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-backupsession-editor-options appscode/corekubestashcom-backupsession-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i corekubestashcom-backupsession-editor-options appscode/corekubestashcom-backupsession-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-backupsession-editor/Chart.yaml b/charts/corekubestashcom-backupsession-editor/Chart.yaml index a655a33055..03f3e30c3a 100644 --- a/charts/corekubestashcom-backupsession-editor/Chart.yaml +++ b/charts/corekubestashcom-backupsession-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: core.kubestash.com\n kind: BackupSession\n\ \ version: v1alpha1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: BackupSession Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: corekubestashcom-backupsession-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/corekubestashcom-backupsession-editor/README.md b/charts/corekubestashcom-backupsession-editor/README.md index edc0e8c47d..5b92835859 100644 --- a/charts/corekubestashcom-backupsession-editor/README.md +++ b/charts/corekubestashcom-backupsession-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-backupsession-editor --version=v0.23.0 -$ helm upgrade -i corekubestashcom-backupsession-editor appscode/corekubestashcom-backupsession-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/corekubestashcom-backupsession-editor --version=v0.24.0 +$ helm upgrade -i corekubestashcom-backupsession-editor appscode/corekubestashcom-backupsession-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupSession Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `corekubestashcom-backupsession-editor`: ```bash -$ helm upgrade -i corekubestashcom-backupsession-editor appscode/corekubestashcom-backupsession-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i corekubestashcom-backupsession-editor appscode/corekubestashcom-backupsession-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a BackupSession Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -60,12 +60,12 @@ The following table lists the configurable parameters of the `corekubestashcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-backupsession-editor appscode/corekubestashcom-backupsession-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=core.kubestash.com +$ helm upgrade -i corekubestashcom-backupsession-editor appscode/corekubestashcom-backupsession-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=core.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-backupsession-editor appscode/corekubestashcom-backupsession-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i corekubestashcom-backupsession-editor appscode/corekubestashcom-backupsession-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-backupverificationsession-editor/Chart.yaml b/charts/corekubestashcom-backupverificationsession-editor/Chart.yaml index 4e82585008..20ad2c7c66 100644 --- a/charts/corekubestashcom-backupverificationsession-editor/Chart.yaml +++ b/charts/corekubestashcom-backupverificationsession-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.kubestash.com","version":"v1alpha1","resource":"backupverificationsession"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: BackupVerificationSession Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corekubestashcom-backupverificationsession-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/corekubestashcom-backupverificationsession-editor/README.md b/charts/corekubestashcom-backupverificationsession-editor/README.md index 0a8a5ebfcb..42723dc98d 100644 --- a/charts/corekubestashcom-backupverificationsession-editor/README.md +++ b/charts/corekubestashcom-backupverificationsession-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-backupverificationsession-editor --version=v0.23.0 -$ helm upgrade -i corekubestashcom-backupverificationsession-editor appscode/corekubestashcom-backupverificationsession-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/corekubestashcom-backupverificationsession-editor --version=v0.24.0 +$ helm upgrade -i corekubestashcom-backupverificationsession-editor appscode/corekubestashcom-backupverificationsession-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupVerificationSession Editor on a [Kubernetes](http://k To install/upgrade the chart with the release name `corekubestashcom-backupverificationsession-editor`: ```bash -$ helm upgrade -i corekubestashcom-backupverificationsession-editor appscode/corekubestashcom-backupverificationsession-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i corekubestashcom-backupverificationsession-editor appscode/corekubestashcom-backupverificationsession-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a BackupVerificationSession Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corekubestashcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-backupverificationsession-editor appscode/corekubestashcom-backupverificationsession-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=core.kubestash.com/v1alpha1 +$ helm upgrade -i corekubestashcom-backupverificationsession-editor appscode/corekubestashcom-backupverificationsession-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=core.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-backupverificationsession-editor appscode/corekubestashcom-backupverificationsession-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i corekubestashcom-backupverificationsession-editor appscode/corekubestashcom-backupverificationsession-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-backupverifier-editor/Chart.yaml b/charts/corekubestashcom-backupverifier-editor/Chart.yaml index c677242b7b..fd264bc520 100644 --- a/charts/corekubestashcom-backupverifier-editor/Chart.yaml +++ b/charts/corekubestashcom-backupverifier-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.kubestash.com","version":"v1alpha1","resource":"backupverifier"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: BackupVerifier Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corekubestashcom-backupverifier-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/corekubestashcom-backupverifier-editor/README.md b/charts/corekubestashcom-backupverifier-editor/README.md index acfd7ade57..783e86c8dc 100644 --- a/charts/corekubestashcom-backupverifier-editor/README.md +++ b/charts/corekubestashcom-backupverifier-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-backupverifier-editor --version=v0.23.0 -$ helm upgrade -i corekubestashcom-backupverifier-editor appscode/corekubestashcom-backupverifier-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/corekubestashcom-backupverifier-editor --version=v0.24.0 +$ helm upgrade -i corekubestashcom-backupverifier-editor appscode/corekubestashcom-backupverifier-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupVerifier Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `corekubestashcom-backupverifier-editor`: ```bash -$ helm upgrade -i corekubestashcom-backupverifier-editor appscode/corekubestashcom-backupverifier-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i corekubestashcom-backupverifier-editor appscode/corekubestashcom-backupverifier-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a BackupVerifier Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corekubestashcom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-backupverifier-editor appscode/corekubestashcom-backupverifier-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=core.kubestash.com/v1alpha1 +$ helm upgrade -i corekubestashcom-backupverifier-editor appscode/corekubestashcom-backupverifier-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=core.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-backupverifier-editor appscode/corekubestashcom-backupverifier-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i corekubestashcom-backupverifier-editor appscode/corekubestashcom-backupverifier-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-hooktemplate-editor/Chart.yaml b/charts/corekubestashcom-hooktemplate-editor/Chart.yaml index 598230775b..f9f115538f 100644 --- a/charts/corekubestashcom-hooktemplate-editor/Chart.yaml +++ b/charts/corekubestashcom-hooktemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"core.kubestash.com","version":"v1alpha1","resource":"hooktemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: HookTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: corekubestashcom-hooktemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/corekubestashcom-hooktemplate-editor/README.md b/charts/corekubestashcom-hooktemplate-editor/README.md index 9cb1f7b8e9..c8a58bf7b8 100644 --- a/charts/corekubestashcom-hooktemplate-editor/README.md +++ b/charts/corekubestashcom-hooktemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-hooktemplate-editor --version=v0.23.0 -$ helm upgrade -i corekubestashcom-hooktemplate-editor appscode/corekubestashcom-hooktemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/corekubestashcom-hooktemplate-editor --version=v0.24.0 +$ helm upgrade -i corekubestashcom-hooktemplate-editor appscode/corekubestashcom-hooktemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HookTemplate Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `corekubestashcom-hooktemplate-editor`: ```bash -$ helm upgrade -i corekubestashcom-hooktemplate-editor appscode/corekubestashcom-hooktemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i corekubestashcom-hooktemplate-editor appscode/corekubestashcom-hooktemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a HookTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `corekubestashcom-h Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-hooktemplate-editor appscode/corekubestashcom-hooktemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=core.kubestash.com/v1alpha1 +$ helm upgrade -i corekubestashcom-hooktemplate-editor appscode/corekubestashcom-hooktemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=core.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-hooktemplate-editor appscode/corekubestashcom-hooktemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i corekubestashcom-hooktemplate-editor appscode/corekubestashcom-hooktemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-restoresession-editor-options/Chart.yaml b/charts/corekubestashcom-restoresession-editor-options/Chart.yaml index 25335b2b9d..1002954279 100644 --- a/charts/corekubestashcom-restoresession-editor-options/Chart.yaml +++ b/charts/corekubestashcom-restoresession-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: corekubestashcom-restoresession-editor-options description: KubeStash RestoreSession Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/corekubestashcom-restoresession-editor-options/README.md b/charts/corekubestashcom-restoresession-editor-options/README.md index a9f9e53e74..3088cd0a46 100644 --- a/charts/corekubestashcom-restoresession-editor-options/README.md +++ b/charts/corekubestashcom-restoresession-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-restoresession-editor-options --version=v0.23.0 -$ helm upgrade -i corekubestashcom-restoresession-editor-options appscode/corekubestashcom-restoresession-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/corekubestashcom-restoresession-editor-options --version=v0.24.0 +$ helm upgrade -i corekubestashcom-restoresession-editor-options appscode/corekubestashcom-restoresession-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KubeStash RestoreSession Editor UI Options on a [Kubernetes To install/upgrade the chart with the release name `corekubestashcom-restoresession-editor-options`: ```bash -$ helm upgrade -i corekubestashcom-restoresession-editor-options appscode/corekubestashcom-restoresession-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i corekubestashcom-restoresession-editor-options appscode/corekubestashcom-restoresession-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a KubeStash RestoreSession Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -72,12 +72,12 @@ The following table lists the configurable parameters of the `corekubestashcom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-restoresession-editor-options appscode/corekubestashcom-restoresession-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=core.kubestash.com +$ helm upgrade -i corekubestashcom-restoresession-editor-options appscode/corekubestashcom-restoresession-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=core.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-restoresession-editor-options appscode/corekubestashcom-restoresession-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i corekubestashcom-restoresession-editor-options appscode/corekubestashcom-restoresession-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/corekubestashcom-restoresession-editor/Chart.yaml b/charts/corekubestashcom-restoresession-editor/Chart.yaml index e914420f46..5ce56b733c 100644 --- a/charts/corekubestashcom-restoresession-editor/Chart.yaml +++ b/charts/corekubestashcom-restoresession-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: core.kubestash.com\n kind: RestoreSession\n\ \ version: v1alpha1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RestoreSession Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: corekubestashcom-restoresession-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/corekubestashcom-restoresession-editor/README.md b/charts/corekubestashcom-restoresession-editor/README.md index 1588ea3023..3419a53306 100644 --- a/charts/corekubestashcom-restoresession-editor/README.md +++ b/charts/corekubestashcom-restoresession-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/corekubestashcom-restoresession-editor --version=v0.23.0 -$ helm upgrade -i corekubestashcom-restoresession-editor appscode/corekubestashcom-restoresession-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/corekubestashcom-restoresession-editor --version=v0.24.0 +$ helm upgrade -i corekubestashcom-restoresession-editor appscode/corekubestashcom-restoresession-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RestoreSession Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `corekubestashcom-restoresession-editor`: ```bash -$ helm upgrade -i corekubestashcom-restoresession-editor appscode/corekubestashcom-restoresession-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i corekubestashcom-restoresession-editor appscode/corekubestashcom-restoresession-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RestoreSession Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -60,12 +60,12 @@ The following table lists the configurable parameters of the `corekubestashcom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i corekubestashcom-restoresession-editor appscode/corekubestashcom-restoresession-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=core.kubestash.com +$ helm upgrade -i corekubestashcom-restoresession-editor appscode/corekubestashcom-restoresession-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=core.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i corekubestashcom-restoresession-editor appscode/corekubestashcom-restoresession-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i corekubestashcom-restoresession-editor appscode/corekubestashcom-restoresession-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-account-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-account-editor/Chart.yaml index 089b3782ed..c95311b095 100644 --- a/charts/cosmosdbazurekubedbcom-account-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-account-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"accounts"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Account Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-account-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-account-editor/README.md b/charts/cosmosdbazurekubedbcom-account-editor/README.md index 52e104de0d..b94cd8edbb 100644 --- a/charts/cosmosdbazurekubedbcom-account-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-account-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-account-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-account-editor appscode/cosmosdbazurekubedbcom-account-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-account-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-account-editor appscode/cosmosdbazurekubedbcom-account-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Account Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-account-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-account-editor appscode/cosmosdbazurekubedbcom-account-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-account-editor appscode/cosmosdbazurekubedbcom-account-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Account Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-account-editor appscode/cosmosdbazurekubedbcom-account-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-account-editor appscode/cosmosdbazurekubedbcom-account-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-account-editor appscode/cosmosdbazurekubedbcom-account-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-account-editor appscode/cosmosdbazurekubedbcom-account-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-cassandracluster-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-cassandracluster-editor/Chart.yaml index a34234e9fe..47f2a74529 100644 --- a/charts/cosmosdbazurekubedbcom-cassandracluster-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-cassandracluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"cassandraclusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: CassandraCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-cassandracluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-cassandracluster-editor/README.md b/charts/cosmosdbazurekubedbcom-cassandracluster-editor/README.md index 62435f6f17..5a90e64150 100644 --- a/charts/cosmosdbazurekubedbcom-cassandracluster-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-cassandracluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-cassandracluster-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-cassandracluster-editor appscode/cosmosdbazurekubedbcom-cassandracluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-cassandracluster-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandracluster-editor appscode/cosmosdbazurekubedbcom-cassandracluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CassandraCluster Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-cassandracluster-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandracluster-editor appscode/cosmosdbazurekubedbcom-cassandracluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandracluster-editor appscode/cosmosdbazurekubedbcom-cassandracluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a CassandraCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandracluster-editor appscode/cosmosdbazurekubedbcom-cassandracluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandracluster-editor appscode/cosmosdbazurekubedbcom-cassandracluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandracluster-editor appscode/cosmosdbazurekubedbcom-cassandracluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-cassandracluster-editor appscode/cosmosdbazurekubedbcom-cassandracluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-cassandradatacenter-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-cassandradatacenter-editor/Chart.yaml index 3299be3d03..5fb9959cd4 100644 --- a/charts/cosmosdbazurekubedbcom-cassandradatacenter-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-cassandradatacenter-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"cassandradatacenters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: CassandraDatacenter Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-cassandradatacenter-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-cassandradatacenter-editor/README.md b/charts/cosmosdbazurekubedbcom-cassandradatacenter-editor/README.md index a9e8d76011..fb57124613 100644 --- a/charts/cosmosdbazurekubedbcom-cassandradatacenter-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-cassandradatacenter-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-cassandradatacenter-editor appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandradatacenter-editor appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CassandraDatacenter Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-cassandradatacenter-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandradatacenter-editor appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandradatacenter-editor appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a CassandraDatacenter Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandradatacenter-editor appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandradatacenter-editor appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandradatacenter-editor appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-cassandradatacenter-editor appscode/cosmosdbazurekubedbcom-cassandradatacenter-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-cassandrakeyspace-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-cassandrakeyspace-editor/Chart.yaml index 0431fca6a5..634e8dc0c4 100644 --- a/charts/cosmosdbazurekubedbcom-cassandrakeyspace-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-cassandrakeyspace-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"cassandrakeyspaces"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: CassandraKeySpace Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-cassandrakeyspace-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-cassandrakeyspace-editor/README.md b/charts/cosmosdbazurekubedbcom-cassandrakeyspace-editor/README.md index 29832819ea..ea1b72beba 100644 --- a/charts/cosmosdbazurekubedbcom-cassandrakeyspace-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-cassandrakeyspace-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-cassandrakeyspace-editor appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandrakeyspace-editor appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CassandraKeySpace Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-cassandrakeyspace-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandrakeyspace-editor appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandrakeyspace-editor appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a CassandraKeySpace Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandrakeyspace-editor appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandrakeyspace-editor appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandrakeyspace-editor appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-cassandrakeyspace-editor appscode/cosmosdbazurekubedbcom-cassandrakeyspace-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-cassandratable-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-cassandratable-editor/Chart.yaml index 59d5dc3193..f665d3a127 100644 --- a/charts/cosmosdbazurekubedbcom-cassandratable-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-cassandratable-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"cassandratables"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: CassandraTable Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-cassandratable-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-cassandratable-editor/README.md b/charts/cosmosdbazurekubedbcom-cassandratable-editor/README.md index 8fd0290056..e93cac0b05 100644 --- a/charts/cosmosdbazurekubedbcom-cassandratable-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-cassandratable-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-cassandratable-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-cassandratable-editor appscode/cosmosdbazurekubedbcom-cassandratable-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-cassandratable-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandratable-editor appscode/cosmosdbazurekubedbcom-cassandratable-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CassandraTable Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-cassandratable-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandratable-editor appscode/cosmosdbazurekubedbcom-cassandratable-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandratable-editor appscode/cosmosdbazurekubedbcom-cassandratable-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a CassandraTable Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandratable-editor appscode/cosmosdbazurekubedbcom-cassandratable-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-cassandratable-editor appscode/cosmosdbazurekubedbcom-cassandratable-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-cassandratable-editor appscode/cosmosdbazurekubedbcom-cassandratable-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-cassandratable-editor appscode/cosmosdbazurekubedbcom-cassandratable-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-gremlindatabase-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-gremlindatabase-editor/Chart.yaml index bbf545a3aa..96b5a8c65a 100644 --- a/charts/cosmosdbazurekubedbcom-gremlindatabase-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-gremlindatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"gremlindatabases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GremlinDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-gremlindatabase-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-gremlindatabase-editor/README.md b/charts/cosmosdbazurekubedbcom-gremlindatabase-editor/README.md index dd93b06cf7..6ee9ee84a3 100644 --- a/charts/cosmosdbazurekubedbcom-gremlindatabase-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-gremlindatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-gremlindatabase-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-gremlindatabase-editor appscode/cosmosdbazurekubedbcom-gremlindatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-gremlindatabase-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-gremlindatabase-editor appscode/cosmosdbazurekubedbcom-gremlindatabase-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GremlinDatabase Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-gremlindatabase-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-gremlindatabase-editor appscode/cosmosdbazurekubedbcom-gremlindatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-gremlindatabase-editor appscode/cosmosdbazurekubedbcom-gremlindatabase-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GremlinDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-gremlindatabase-editor appscode/cosmosdbazurekubedbcom-gremlindatabase-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-gremlindatabase-editor appscode/cosmosdbazurekubedbcom-gremlindatabase-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-gremlindatabase-editor appscode/cosmosdbazurekubedbcom-gremlindatabase-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-gremlindatabase-editor appscode/cosmosdbazurekubedbcom-gremlindatabase-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-gremlingraph-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-gremlingraph-editor/Chart.yaml index db1d11d8b9..9e319ba25f 100644 --- a/charts/cosmosdbazurekubedbcom-gremlingraph-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-gremlingraph-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"gremlingraphs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GremlinGraph Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-gremlingraph-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-gremlingraph-editor/README.md b/charts/cosmosdbazurekubedbcom-gremlingraph-editor/README.md index 78d266655d..fd0010a7b9 100644 --- a/charts/cosmosdbazurekubedbcom-gremlingraph-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-gremlingraph-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-gremlingraph-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-gremlingraph-editor appscode/cosmosdbazurekubedbcom-gremlingraph-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-gremlingraph-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-gremlingraph-editor appscode/cosmosdbazurekubedbcom-gremlingraph-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GremlinGraph Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-gremlingraph-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-gremlingraph-editor appscode/cosmosdbazurekubedbcom-gremlingraph-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-gremlingraph-editor appscode/cosmosdbazurekubedbcom-gremlingraph-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GremlinGraph Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-gremlingraph-editor appscode/cosmosdbazurekubedbcom-gremlingraph-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-gremlingraph-editor appscode/cosmosdbazurekubedbcom-gremlingraph-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-gremlingraph-editor appscode/cosmosdbazurekubedbcom-gremlingraph-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-gremlingraph-editor appscode/cosmosdbazurekubedbcom-gremlingraph-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-mongocollection-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-mongocollection-editor/Chart.yaml index a31fb653cf..4c60d60c13 100644 --- a/charts/cosmosdbazurekubedbcom-mongocollection-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-mongocollection-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"mongocollections"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MongoCollection Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-mongocollection-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-mongocollection-editor/README.md b/charts/cosmosdbazurekubedbcom-mongocollection-editor/README.md index bfdb38c441..2667f3c039 100644 --- a/charts/cosmosdbazurekubedbcom-mongocollection-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-mongocollection-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-mongocollection-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-mongocollection-editor appscode/cosmosdbazurekubedbcom-mongocollection-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-mongocollection-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-mongocollection-editor appscode/cosmosdbazurekubedbcom-mongocollection-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoCollection Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-mongocollection-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-mongocollection-editor appscode/cosmosdbazurekubedbcom-mongocollection-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-mongocollection-editor appscode/cosmosdbazurekubedbcom-mongocollection-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MongoCollection Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-mongocollection-editor appscode/cosmosdbazurekubedbcom-mongocollection-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-mongocollection-editor appscode/cosmosdbazurekubedbcom-mongocollection-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-mongocollection-editor appscode/cosmosdbazurekubedbcom-mongocollection-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-mongocollection-editor appscode/cosmosdbazurekubedbcom-mongocollection-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-mongodatabase-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-mongodatabase-editor/Chart.yaml index 832745a0c0..76f20ff342 100644 --- a/charts/cosmosdbazurekubedbcom-mongodatabase-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-mongodatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"mongodatabases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MongoDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-mongodatabase-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-mongodatabase-editor/README.md b/charts/cosmosdbazurekubedbcom-mongodatabase-editor/README.md index fdfc529d08..f0c62a98c2 100644 --- a/charts/cosmosdbazurekubedbcom-mongodatabase-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-mongodatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-mongodatabase-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-mongodatabase-editor appscode/cosmosdbazurekubedbcom-mongodatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-mongodatabase-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-mongodatabase-editor appscode/cosmosdbazurekubedbcom-mongodatabase-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDatabase Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-mongodatabase-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-mongodatabase-editor appscode/cosmosdbazurekubedbcom-mongodatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-mongodatabase-editor appscode/cosmosdbazurekubedbcom-mongodatabase-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MongoDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-mongodatabase-editor appscode/cosmosdbazurekubedbcom-mongodatabase-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-mongodatabase-editor appscode/cosmosdbazurekubedbcom-mongodatabase-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-mongodatabase-editor appscode/cosmosdbazurekubedbcom-mongodatabase-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-mongodatabase-editor appscode/cosmosdbazurekubedbcom-mongodatabase-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-sqlcontainer-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-sqlcontainer-editor/Chart.yaml index 803e37e8c9..159fe84e7a 100644 --- a/charts/cosmosdbazurekubedbcom-sqlcontainer-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-sqlcontainer-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"sqlcontainers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SQLContainer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-sqlcontainer-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-sqlcontainer-editor/README.md b/charts/cosmosdbazurekubedbcom-sqlcontainer-editor/README.md index 05d4440cdb..67bc5a5ae1 100644 --- a/charts/cosmosdbazurekubedbcom-sqlcontainer-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-sqlcontainer-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-sqlcontainer-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-sqlcontainer-editor appscode/cosmosdbazurekubedbcom-sqlcontainer-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-sqlcontainer-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlcontainer-editor appscode/cosmosdbazurekubedbcom-sqlcontainer-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SQLContainer Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-sqlcontainer-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlcontainer-editor appscode/cosmosdbazurekubedbcom-sqlcontainer-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlcontainer-editor appscode/cosmosdbazurekubedbcom-sqlcontainer-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SQLContainer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlcontainer-editor appscode/cosmosdbazurekubedbcom-sqlcontainer-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlcontainer-editor appscode/cosmosdbazurekubedbcom-sqlcontainer-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlcontainer-editor appscode/cosmosdbazurekubedbcom-sqlcontainer-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-sqlcontainer-editor appscode/cosmosdbazurekubedbcom-sqlcontainer-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-sqldatabase-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-sqldatabase-editor/Chart.yaml index ce57452b05..ddba44d403 100644 --- a/charts/cosmosdbazurekubedbcom-sqldatabase-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-sqldatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"sqldatabases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SQLDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-sqldatabase-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-sqldatabase-editor/README.md b/charts/cosmosdbazurekubedbcom-sqldatabase-editor/README.md index 47a68594c1..7e329bf06b 100644 --- a/charts/cosmosdbazurekubedbcom-sqldatabase-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-sqldatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-sqldatabase-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-sqldatabase-editor appscode/cosmosdbazurekubedbcom-sqldatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-sqldatabase-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqldatabase-editor appscode/cosmosdbazurekubedbcom-sqldatabase-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SQLDatabase Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-sqldatabase-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqldatabase-editor appscode/cosmosdbazurekubedbcom-sqldatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqldatabase-editor appscode/cosmosdbazurekubedbcom-sqldatabase-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SQLDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqldatabase-editor appscode/cosmosdbazurekubedbcom-sqldatabase-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-sqldatabase-editor appscode/cosmosdbazurekubedbcom-sqldatabase-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqldatabase-editor appscode/cosmosdbazurekubedbcom-sqldatabase-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-sqldatabase-editor appscode/cosmosdbazurekubedbcom-sqldatabase-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-sqldedicatedgateway-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-sqldedicatedgateway-editor/Chart.yaml index f4bf5a4f2c..ac5185d67b 100644 --- a/charts/cosmosdbazurekubedbcom-sqldedicatedgateway-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-sqldedicatedgateway-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"sqldedicatedgateways"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SQLDedicatedGateway Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-sqldedicatedgateway-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-sqldedicatedgateway-editor/README.md b/charts/cosmosdbazurekubedbcom-sqldedicatedgateway-editor/README.md index 12e55b281e..bcc882eec9 100644 --- a/charts/cosmosdbazurekubedbcom-sqldedicatedgateway-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-sqldedicatedgateway-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-sqldedicatedgateway-editor appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqldedicatedgateway-editor appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SQLDedicatedGateway Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-sqldedicatedgateway-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqldedicatedgateway-editor appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqldedicatedgateway-editor appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SQLDedicatedGateway Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqldedicatedgateway-editor appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-sqldedicatedgateway-editor appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqldedicatedgateway-editor appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-sqldedicatedgateway-editor appscode/cosmosdbazurekubedbcom-sqldedicatedgateway-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-sqlfunction-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-sqlfunction-editor/Chart.yaml index 8a49f45401..a2c646ccca 100644 --- a/charts/cosmosdbazurekubedbcom-sqlfunction-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-sqlfunction-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"sqlfunctions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SQLFunction Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-sqlfunction-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-sqlfunction-editor/README.md b/charts/cosmosdbazurekubedbcom-sqlfunction-editor/README.md index d534677383..16f2967329 100644 --- a/charts/cosmosdbazurekubedbcom-sqlfunction-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-sqlfunction-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-sqlfunction-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-sqlfunction-editor appscode/cosmosdbazurekubedbcom-sqlfunction-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-sqlfunction-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlfunction-editor appscode/cosmosdbazurekubedbcom-sqlfunction-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SQLFunction Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-sqlfunction-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlfunction-editor appscode/cosmosdbazurekubedbcom-sqlfunction-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlfunction-editor appscode/cosmosdbazurekubedbcom-sqlfunction-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SQLFunction Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlfunction-editor appscode/cosmosdbazurekubedbcom-sqlfunction-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlfunction-editor appscode/cosmosdbazurekubedbcom-sqlfunction-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlfunction-editor appscode/cosmosdbazurekubedbcom-sqlfunction-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-sqlfunction-editor appscode/cosmosdbazurekubedbcom-sqlfunction-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-sqlroleassignment-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-sqlroleassignment-editor/Chart.yaml index 1db9ae410c..9ca500860b 100644 --- a/charts/cosmosdbazurekubedbcom-sqlroleassignment-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-sqlroleassignment-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"sqlroleassignments"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SQLRoleAssignment Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-sqlroleassignment-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-sqlroleassignment-editor/README.md b/charts/cosmosdbazurekubedbcom-sqlroleassignment-editor/README.md index e4d2f09780..8625d849c5 100644 --- a/charts/cosmosdbazurekubedbcom-sqlroleassignment-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-sqlroleassignment-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-sqlroleassignment-editor appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlroleassignment-editor appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SQLRoleAssignment Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-sqlroleassignment-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlroleassignment-editor appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlroleassignment-editor appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SQLRoleAssignment Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlroleassignment-editor appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlroleassignment-editor appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlroleassignment-editor appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-sqlroleassignment-editor appscode/cosmosdbazurekubedbcom-sqlroleassignment-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-sqlroledefinition-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-sqlroledefinition-editor/Chart.yaml index 22cbe69d98..22462929e0 100644 --- a/charts/cosmosdbazurekubedbcom-sqlroledefinition-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-sqlroledefinition-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"sqlroledefinitions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SQLRoleDefinition Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-sqlroledefinition-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-sqlroledefinition-editor/README.md b/charts/cosmosdbazurekubedbcom-sqlroledefinition-editor/README.md index 7c0bca43c5..2ae4cc36d9 100644 --- a/charts/cosmosdbazurekubedbcom-sqlroledefinition-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-sqlroledefinition-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-sqlroledefinition-editor appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlroledefinition-editor appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SQLRoleDefinition Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-sqlroledefinition-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlroledefinition-editor appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlroledefinition-editor appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SQLRoleDefinition Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlroledefinition-editor appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlroledefinition-editor appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlroledefinition-editor appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-sqlroledefinition-editor appscode/cosmosdbazurekubedbcom-sqlroledefinition-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-sqlstoredprocedure-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-sqlstoredprocedure-editor/Chart.yaml index 4de03a03a0..9eeed669aa 100644 --- a/charts/cosmosdbazurekubedbcom-sqlstoredprocedure-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-sqlstoredprocedure-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"sqlstoredprocedures"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SQLStoredProcedure Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-sqlstoredprocedure-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-sqlstoredprocedure-editor/README.md b/charts/cosmosdbazurekubedbcom-sqlstoredprocedure-editor/README.md index 574e929400..4406a34098 100644 --- a/charts/cosmosdbazurekubedbcom-sqlstoredprocedure-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-sqlstoredprocedure-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-sqlstoredprocedure-editor appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlstoredprocedure-editor appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SQLStoredProcedure Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-sqlstoredprocedure-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlstoredprocedure-editor appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlstoredprocedure-editor appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SQLStoredProcedure Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlstoredprocedure-editor appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-sqlstoredprocedure-editor appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqlstoredprocedure-editor appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-sqlstoredprocedure-editor appscode/cosmosdbazurekubedbcom-sqlstoredprocedure-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-sqltrigger-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-sqltrigger-editor/Chart.yaml index f3dc0c266c..d84eb15c15 100644 --- a/charts/cosmosdbazurekubedbcom-sqltrigger-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-sqltrigger-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"sqltriggers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SQLTrigger Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-sqltrigger-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-sqltrigger-editor/README.md b/charts/cosmosdbazurekubedbcom-sqltrigger-editor/README.md index aeed128059..e600d96e64 100644 --- a/charts/cosmosdbazurekubedbcom-sqltrigger-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-sqltrigger-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-sqltrigger-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-sqltrigger-editor appscode/cosmosdbazurekubedbcom-sqltrigger-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-sqltrigger-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqltrigger-editor appscode/cosmosdbazurekubedbcom-sqltrigger-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SQLTrigger Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-sqltrigger-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqltrigger-editor appscode/cosmosdbazurekubedbcom-sqltrigger-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-sqltrigger-editor appscode/cosmosdbazurekubedbcom-sqltrigger-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SQLTrigger Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqltrigger-editor appscode/cosmosdbazurekubedbcom-sqltrigger-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-sqltrigger-editor appscode/cosmosdbazurekubedbcom-sqltrigger-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-sqltrigger-editor appscode/cosmosdbazurekubedbcom-sqltrigger-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-sqltrigger-editor appscode/cosmosdbazurekubedbcom-sqltrigger-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/cosmosdbazurekubedbcom-table-editor/Chart.yaml b/charts/cosmosdbazurekubedbcom-table-editor/Chart.yaml index 29cec3f290..4cd47b67bc 100644 --- a/charts/cosmosdbazurekubedbcom-table-editor/Chart.yaml +++ b/charts/cosmosdbazurekubedbcom-table-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"cosmosdb.azure.kubedb.com","version":"v1alpha1","resource":"tables"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Table Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: cosmosdbazurekubedbcom-table-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/cosmosdbazurekubedbcom-table-editor/README.md b/charts/cosmosdbazurekubedbcom-table-editor/README.md index 2459fb9c6e..b488c9c1b9 100644 --- a/charts/cosmosdbazurekubedbcom-table-editor/README.md +++ b/charts/cosmosdbazurekubedbcom-table-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/cosmosdbazurekubedbcom-table-editor --version=v0.23.0 -$ helm upgrade -i cosmosdbazurekubedbcom-table-editor appscode/cosmosdbazurekubedbcom-table-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/cosmosdbazurekubedbcom-table-editor --version=v0.24.0 +$ helm upgrade -i cosmosdbazurekubedbcom-table-editor appscode/cosmosdbazurekubedbcom-table-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Table Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `cosmosdbazurekubedbcom-table-editor`: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-table-editor appscode/cosmosdbazurekubedbcom-table-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i cosmosdbazurekubedbcom-table-editor appscode/cosmosdbazurekubedbcom-table-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Table Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `cosmosdbazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-table-editor appscode/cosmosdbazurekubedbcom-table-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i cosmosdbazurekubedbcom-table-editor appscode/cosmosdbazurekubedbcom-table-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=cosmosdb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i cosmosdbazurekubedbcom-table-editor appscode/cosmosdbazurekubedbcom-table-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i cosmosdbazurekubedbcom-table-editor appscode/cosmosdbazurekubedbcom-table-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbformariadbazurekubedbcom-configuration-editor/Chart.yaml b/charts/dbformariadbazurekubedbcom-configuration-editor/Chart.yaml index 49aebecb2f..8c89a66bd7 100644 --- a/charts/dbformariadbazurekubedbcom-configuration-editor/Chart.yaml +++ b/charts/dbformariadbazurekubedbcom-configuration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformariadb.azure.kubedb.com","version":"v1alpha1","resource":"configurations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Configuration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformariadbazurekubedbcom-configuration-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbformariadbazurekubedbcom-configuration-editor/README.md b/charts/dbformariadbazurekubedbcom-configuration-editor/README.md index 2f72e77cd9..2dad4c0f36 100644 --- a/charts/dbformariadbazurekubedbcom-configuration-editor/README.md +++ b/charts/dbformariadbazurekubedbcom-configuration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformariadbazurekubedbcom-configuration-editor --version=v0.23.0 -$ helm upgrade -i dbformariadbazurekubedbcom-configuration-editor appscode/dbformariadbazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbformariadbazurekubedbcom-configuration-editor --version=v0.24.0 +$ helm upgrade -i dbformariadbazurekubedbcom-configuration-editor appscode/dbformariadbazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Configuration Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `dbformariadbazurekubedbcom-configuration-editor`: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-configuration-editor appscode/dbformariadbazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbformariadbazurekubedbcom-configuration-editor appscode/dbformariadbazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Configuration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformariadbazurek Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-configuration-editor appscode/dbformariadbazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformariadbazurekubedbcom-configuration-editor appscode/dbformariadbazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-configuration-editor appscode/dbformariadbazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbformariadbazurekubedbcom-configuration-editor appscode/dbformariadbazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbformariadbazurekubedbcom-database-editor/Chart.yaml b/charts/dbformariadbazurekubedbcom-database-editor/Chart.yaml index eaf93856b0..145ecef070 100644 --- a/charts/dbformariadbazurekubedbcom-database-editor/Chart.yaml +++ b/charts/dbformariadbazurekubedbcom-database-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformariadb.azure.kubedb.com","version":"v1alpha1","resource":"databases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Database Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformariadbazurekubedbcom-database-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbformariadbazurekubedbcom-database-editor/README.md b/charts/dbformariadbazurekubedbcom-database-editor/README.md index 2a875a97f1..2517e06986 100644 --- a/charts/dbformariadbazurekubedbcom-database-editor/README.md +++ b/charts/dbformariadbazurekubedbcom-database-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformariadbazurekubedbcom-database-editor --version=v0.23.0 -$ helm upgrade -i dbformariadbazurekubedbcom-database-editor appscode/dbformariadbazurekubedbcom-database-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbformariadbazurekubedbcom-database-editor --version=v0.24.0 +$ helm upgrade -i dbformariadbazurekubedbcom-database-editor appscode/dbformariadbazurekubedbcom-database-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Database Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `dbformariadbazurekubedbcom-database-editor`: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-database-editor appscode/dbformariadbazurekubedbcom-database-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbformariadbazurekubedbcom-database-editor appscode/dbformariadbazurekubedbcom-database-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Database Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformariadbazurek Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-database-editor appscode/dbformariadbazurekubedbcom-database-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformariadbazurekubedbcom-database-editor appscode/dbformariadbazurekubedbcom-database-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-database-editor appscode/dbformariadbazurekubedbcom-database-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbformariadbazurekubedbcom-database-editor appscode/dbformariadbazurekubedbcom-database-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbformariadbazurekubedbcom-firewallrule-editor/Chart.yaml b/charts/dbformariadbazurekubedbcom-firewallrule-editor/Chart.yaml index 68a493e67a..18ed89ef18 100644 --- a/charts/dbformariadbazurekubedbcom-firewallrule-editor/Chart.yaml +++ b/charts/dbformariadbazurekubedbcom-firewallrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformariadb.azure.kubedb.com","version":"v1alpha1","resource":"firewallrules"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FirewallRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformariadbazurekubedbcom-firewallrule-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbformariadbazurekubedbcom-firewallrule-editor/README.md b/charts/dbformariadbazurekubedbcom-firewallrule-editor/README.md index 18640c92e7..7ba6eb34b1 100644 --- a/charts/dbformariadbazurekubedbcom-firewallrule-editor/README.md +++ b/charts/dbformariadbazurekubedbcom-firewallrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformariadbazurekubedbcom-firewallrule-editor --version=v0.23.0 -$ helm upgrade -i dbformariadbazurekubedbcom-firewallrule-editor appscode/dbformariadbazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbformariadbazurekubedbcom-firewallrule-editor --version=v0.24.0 +$ helm upgrade -i dbformariadbazurekubedbcom-firewallrule-editor appscode/dbformariadbazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FirewallRule Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `dbformariadbazurekubedbcom-firewallrule-editor`: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-firewallrule-editor appscode/dbformariadbazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbformariadbazurekubedbcom-firewallrule-editor appscode/dbformariadbazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FirewallRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformariadbazurek Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-firewallrule-editor appscode/dbformariadbazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformariadbazurekubedbcom-firewallrule-editor appscode/dbformariadbazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-firewallrule-editor appscode/dbformariadbazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbformariadbazurekubedbcom-firewallrule-editor appscode/dbformariadbazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbformariadbazurekubedbcom-server-editor/Chart.yaml b/charts/dbformariadbazurekubedbcom-server-editor/Chart.yaml index 14dd165c57..16a5c4ca87 100644 --- a/charts/dbformariadbazurekubedbcom-server-editor/Chart.yaml +++ b/charts/dbformariadbazurekubedbcom-server-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformariadb.azure.kubedb.com","version":"v1alpha1","resource":"servers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Server Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformariadbazurekubedbcom-server-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbformariadbazurekubedbcom-server-editor/README.md b/charts/dbformariadbazurekubedbcom-server-editor/README.md index 4e507185f2..4185cc93e6 100644 --- a/charts/dbformariadbazurekubedbcom-server-editor/README.md +++ b/charts/dbformariadbazurekubedbcom-server-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformariadbazurekubedbcom-server-editor --version=v0.23.0 -$ helm upgrade -i dbformariadbazurekubedbcom-server-editor appscode/dbformariadbazurekubedbcom-server-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbformariadbazurekubedbcom-server-editor --version=v0.24.0 +$ helm upgrade -i dbformariadbazurekubedbcom-server-editor appscode/dbformariadbazurekubedbcom-server-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Server Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `dbformariadbazurekubedbcom-server-editor`: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-server-editor appscode/dbformariadbazurekubedbcom-server-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbformariadbazurekubedbcom-server-editor appscode/dbformariadbazurekubedbcom-server-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Server Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformariadbazurek Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-server-editor appscode/dbformariadbazurekubedbcom-server-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformariadbazurekubedbcom-server-editor appscode/dbformariadbazurekubedbcom-server-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-server-editor appscode/dbformariadbazurekubedbcom-server-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbformariadbazurekubedbcom-server-editor appscode/dbformariadbazurekubedbcom-server-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbformariadbazurekubedbcom-virtualnetworkrule-editor/Chart.yaml b/charts/dbformariadbazurekubedbcom-virtualnetworkrule-editor/Chart.yaml index fd7dab00bc..7878d3a497 100644 --- a/charts/dbformariadbazurekubedbcom-virtualnetworkrule-editor/Chart.yaml +++ b/charts/dbformariadbazurekubedbcom-virtualnetworkrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformariadb.azure.kubedb.com","version":"v1alpha1","resource":"virtualnetworkrules"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VirtualNetworkRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformariadbazurekubedbcom-virtualnetworkrule-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbformariadbazurekubedbcom-virtualnetworkrule-editor/README.md b/charts/dbformariadbazurekubedbcom-virtualnetworkrule-editor/README.md index d009e0a6de..89e2485d45 100644 --- a/charts/dbformariadbazurekubedbcom-virtualnetworkrule-editor/README.md +++ b/charts/dbformariadbazurekubedbcom-virtualnetworkrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor --version=v0.23.0 -$ helm upgrade -i dbformariadbazurekubedbcom-virtualnetworkrule-editor appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor --version=v0.24.0 +$ helm upgrade -i dbformariadbazurekubedbcom-virtualnetworkrule-editor appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VirtualNetworkRule Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `dbformariadbazurekubedbcom-virtualnetworkrule-editor`: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-virtualnetworkrule-editor appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbformariadbazurekubedbcom-virtualnetworkrule-editor appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VirtualNetworkRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformariadbazurek Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-virtualnetworkrule-editor appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformariadbazurekubedbcom-virtualnetworkrule-editor appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbformariadb.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformariadbazurekubedbcom-virtualnetworkrule-editor appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbformariadbazurekubedbcom-virtualnetworkrule-editor appscode/dbformariadbazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-activedirectoryadministrator-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-activedirectoryadministrator-editor/Chart.yaml index 800c865145..72c00aa958 100644 --- a/charts/dbformysqlazurekubedbcom-activedirectoryadministrator-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-activedirectoryadministrator-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"activedirectoryadministrators"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ActiveDirectoryAdministrator Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-activedirectoryadministrator-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbformysqlazurekubedbcom-activedirectoryadministrator-editor/README.md b/charts/dbformysqlazurekubedbcom-activedirectoryadministrator-editor/README.md index 2f90a596fd..1b50228fe8 100644 --- a/charts/dbformysqlazurekubedbcom-activedirectoryadministrator-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-activedirectoryadministrator-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor --version=v0.23.0 -$ helm upgrade -i dbformysqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor --version=v0.24.0 +$ helm upgrade -i dbformysqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ActiveDirectoryAdministrator Editor on a [Kubernetes](http: To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-activedirectoryadministrator-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbformysqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ActiveDirectoryAdministrator Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbformysqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-configuration-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-configuration-editor/Chart.yaml index bd2b4563a6..ac6701fe6b 100644 --- a/charts/dbformysqlazurekubedbcom-configuration-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-configuration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"configurations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Configuration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-configuration-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbformysqlazurekubedbcom-configuration-editor/README.md b/charts/dbformysqlazurekubedbcom-configuration-editor/README.md index 3342a63556..a1159596f2 100644 --- a/charts/dbformysqlazurekubedbcom-configuration-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-configuration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-configuration-editor --version=v0.23.0 -$ helm upgrade -i dbformysqlazurekubedbcom-configuration-editor appscode/dbformysqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-configuration-editor --version=v0.24.0 +$ helm upgrade -i dbformysqlazurekubedbcom-configuration-editor appscode/dbformysqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Configuration Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-configuration-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-configuration-editor appscode/dbformysqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbformysqlazurekubedbcom-configuration-editor appscode/dbformysqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Configuration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-configuration-editor appscode/dbformysqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-configuration-editor appscode/dbformysqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-configuration-editor appscode/dbformysqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-configuration-editor appscode/dbformysqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-database-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-database-editor/Chart.yaml index bd3b77fd3f..8bcfbe8825 100644 --- a/charts/dbformysqlazurekubedbcom-database-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-database-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"databases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Database Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-database-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbformysqlazurekubedbcom-database-editor/README.md b/charts/dbformysqlazurekubedbcom-database-editor/README.md index 8d1c1b272c..41275aa6f3 100644 --- a/charts/dbformysqlazurekubedbcom-database-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-database-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-database-editor --version=v0.23.0 -$ helm upgrade -i dbformysqlazurekubedbcom-database-editor appscode/dbformysqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-database-editor --version=v0.24.0 +$ helm upgrade -i dbformysqlazurekubedbcom-database-editor appscode/dbformysqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Database Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-database-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-database-editor appscode/dbformysqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbformysqlazurekubedbcom-database-editor appscode/dbformysqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Database Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-database-editor appscode/dbformysqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-database-editor appscode/dbformysqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-database-editor appscode/dbformysqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-database-editor appscode/dbformysqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-firewallrule-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-firewallrule-editor/Chart.yaml index 68faaa004c..5020178215 100644 --- a/charts/dbformysqlazurekubedbcom-firewallrule-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-firewallrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"firewallrules"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FirewallRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-firewallrule-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbformysqlazurekubedbcom-firewallrule-editor/README.md b/charts/dbformysqlazurekubedbcom-firewallrule-editor/README.md index 4f3db641f4..982c50e5f5 100644 --- a/charts/dbformysqlazurekubedbcom-firewallrule-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-firewallrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-firewallrule-editor --version=v0.23.0 -$ helm upgrade -i dbformysqlazurekubedbcom-firewallrule-editor appscode/dbformysqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-firewallrule-editor --version=v0.24.0 +$ helm upgrade -i dbformysqlazurekubedbcom-firewallrule-editor appscode/dbformysqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FirewallRule Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-firewallrule-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-firewallrule-editor appscode/dbformysqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbformysqlazurekubedbcom-firewallrule-editor appscode/dbformysqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FirewallRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-firewallrule-editor appscode/dbformysqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-firewallrule-editor appscode/dbformysqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-firewallrule-editor appscode/dbformysqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-firewallrule-editor appscode/dbformysqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-flexibledatabase-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-flexibledatabase-editor/Chart.yaml index 1c2b061340..ff49f8fd93 100644 --- a/charts/dbformysqlazurekubedbcom-flexibledatabase-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-flexibledatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"flexibledatabases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FlexibleDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-flexibledatabase-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbformysqlazurekubedbcom-flexibledatabase-editor/README.md b/charts/dbformysqlazurekubedbcom-flexibledatabase-editor/README.md index 1f1c5ab73c..9a2a05d9cd 100644 --- a/charts/dbformysqlazurekubedbcom-flexibledatabase-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-flexibledatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-flexibledatabase-editor --version=v0.23.0 -$ helm upgrade -i dbformysqlazurekubedbcom-flexibledatabase-editor appscode/dbformysqlazurekubedbcom-flexibledatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-flexibledatabase-editor --version=v0.24.0 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibledatabase-editor appscode/dbformysqlazurekubedbcom-flexibledatabase-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlexibleDatabase Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-flexibledatabase-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibledatabase-editor appscode/dbformysqlazurekubedbcom-flexibledatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibledatabase-editor appscode/dbformysqlazurekubedbcom-flexibledatabase-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FlexibleDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibledatabase-editor appscode/dbformysqlazurekubedbcom-flexibledatabase-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibledatabase-editor appscode/dbformysqlazurekubedbcom-flexibledatabase-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibledatabase-editor appscode/dbformysqlazurekubedbcom-flexibledatabase-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-flexibledatabase-editor appscode/dbformysqlazurekubedbcom-flexibledatabase-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-flexibleserver-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-flexibleserver-editor/Chart.yaml index f2c490edd3..883f7aba43 100644 --- a/charts/dbformysqlazurekubedbcom-flexibleserver-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-flexibleserver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"flexibleservers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FlexibleServer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-flexibleserver-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbformysqlazurekubedbcom-flexibleserver-editor/README.md b/charts/dbformysqlazurekubedbcom-flexibleserver-editor/README.md index fcc277dc3a..9e9bf0981a 100644 --- a/charts/dbformysqlazurekubedbcom-flexibleserver-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-flexibleserver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-flexibleserver-editor --version=v0.23.0 -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserver-editor appscode/dbformysqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-flexibleserver-editor --version=v0.24.0 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserver-editor appscode/dbformysqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlexibleServer Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-flexibleserver-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserver-editor appscode/dbformysqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserver-editor appscode/dbformysqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FlexibleServer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserver-editor appscode/dbformysqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserver-editor appscode/dbformysqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserver-editor appscode/dbformysqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserver-editor appscode/dbformysqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor/Chart.yaml index a0c59c830a..327d57c515 100644 --- a/charts/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"flexibleserverconfigurations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FlexibleServerConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-flexibleserverconfiguration-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor/README.md b/charts/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor/README.md index 558fef46b7..64d046ca80 100644 --- a/charts/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor --version=v0.23.0 -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor --version=v0.24.0 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlexibleServerConfiguration Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-flexibleserverconfiguration-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FlexibleServerConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbformysqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor/Chart.yaml index 6908e5f67c..91ca6519d4 100644 --- a/charts/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"flexibleserverfirewallrules"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FlexibleServerFirewallRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor/README.md b/charts/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor/README.md index d332572562..1723f3d0ef 100644 --- a/charts/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor --version=v0.23.0 -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor --version=v0.24.0 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlexibleServerFirewallRule Editor on a [Kubernetes](http:// To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FlexibleServerFirewallRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbformysqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-server-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-server-editor/Chart.yaml index 069d672035..efc7e49349 100644 --- a/charts/dbformysqlazurekubedbcom-server-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-server-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"servers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Server Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-server-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbformysqlazurekubedbcom-server-editor/README.md b/charts/dbformysqlazurekubedbcom-server-editor/README.md index 0fb835c99d..fee16b30f9 100644 --- a/charts/dbformysqlazurekubedbcom-server-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-server-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-server-editor --version=v0.23.0 -$ helm upgrade -i dbformysqlazurekubedbcom-server-editor appscode/dbformysqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-server-editor --version=v0.24.0 +$ helm upgrade -i dbformysqlazurekubedbcom-server-editor appscode/dbformysqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Server Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-server-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-server-editor appscode/dbformysqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbformysqlazurekubedbcom-server-editor appscode/dbformysqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Server Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-server-editor appscode/dbformysqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-server-editor appscode/dbformysqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-server-editor appscode/dbformysqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-server-editor appscode/dbformysqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbformysqlazurekubedbcom-virtualnetworkrule-editor/Chart.yaml b/charts/dbformysqlazurekubedbcom-virtualnetworkrule-editor/Chart.yaml index 62a883f9ef..4a2ef1cd78 100644 --- a/charts/dbformysqlazurekubedbcom-virtualnetworkrule-editor/Chart.yaml +++ b/charts/dbformysqlazurekubedbcom-virtualnetworkrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbformysql.azure.kubedb.com","version":"v1alpha1","resource":"virtualnetworkrules"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VirtualNetworkRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbformysqlazurekubedbcom-virtualnetworkrule-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbformysqlazurekubedbcom-virtualnetworkrule-editor/README.md b/charts/dbformysqlazurekubedbcom-virtualnetworkrule-editor/README.md index 95dd81fd27..132b0d2ad2 100644 --- a/charts/dbformysqlazurekubedbcom-virtualnetworkrule-editor/README.md +++ b/charts/dbformysqlazurekubedbcom-virtualnetworkrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor --version=v0.23.0 -$ helm upgrade -i dbformysqlazurekubedbcom-virtualnetworkrule-editor appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor --version=v0.24.0 +$ helm upgrade -i dbformysqlazurekubedbcom-virtualnetworkrule-editor appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VirtualNetworkRule Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `dbformysqlazurekubedbcom-virtualnetworkrule-editor`: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-virtualnetworkrule-editor appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbformysqlazurekubedbcom-virtualnetworkrule-editor appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VirtualNetworkRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbformysqlazurekub Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-virtualnetworkrule-editor appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbformysqlazurekubedbcom-virtualnetworkrule-editor appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbformysql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbformysqlazurekubedbcom-virtualnetworkrule-editor appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbformysqlazurekubedbcom-virtualnetworkrule-editor appscode/dbformysqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor/Chart.yaml index 723f35e4a5..f8369ec6b6 100644 --- a/charts/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"activedirectoryadministrators"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ActiveDirectoryAdministrator Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor/README.md index 9fd817818b..2961538538 100644 --- a/charts/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor --version=v0.23.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor --version=v0.24.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ActiveDirectoryAdministrator Editor on a [Kubernetes](http: To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ActiveDirectoryAdministrator Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor appscode/dbforpostgresqlazurekubedbcom-activedirectoryadministrator-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-configuration-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-configuration-editor/Chart.yaml index 7117041de1..b09454b3b7 100644 --- a/charts/dbforpostgresqlazurekubedbcom-configuration-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-configuration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"configurations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Configuration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-configuration-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-configuration-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-configuration-editor/README.md index f5f3354a54..29e20ab3db 100644 --- a/charts/dbforpostgresqlazurekubedbcom-configuration-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-configuration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-configuration-editor --version=v0.23.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-configuration-editor appscode/dbforpostgresqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-configuration-editor --version=v0.24.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-configuration-editor appscode/dbforpostgresqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Configuration Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-configuration-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-configuration-editor appscode/dbforpostgresqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-configuration-editor appscode/dbforpostgresqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Configuration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-configuration-editor appscode/dbforpostgresqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-configuration-editor appscode/dbforpostgresqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-configuration-editor appscode/dbforpostgresqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-configuration-editor appscode/dbforpostgresqlazurekubedbcom-configuration-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-database-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-database-editor/Chart.yaml index 2e6426eea2..1e038470ec 100644 --- a/charts/dbforpostgresqlazurekubedbcom-database-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-database-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"databases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Database Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-database-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-database-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-database-editor/README.md index 6e5cc0e838..e0e6dbbd56 100644 --- a/charts/dbforpostgresqlazurekubedbcom-database-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-database-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-database-editor --version=v0.23.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-database-editor appscode/dbforpostgresqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-database-editor --version=v0.24.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-database-editor appscode/dbforpostgresqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Database Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-database-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-database-editor appscode/dbforpostgresqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-database-editor appscode/dbforpostgresqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Database Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-database-editor appscode/dbforpostgresqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-database-editor appscode/dbforpostgresqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-database-editor appscode/dbforpostgresqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-database-editor appscode/dbforpostgresqlazurekubedbcom-database-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-firewallrule-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-firewallrule-editor/Chart.yaml index e292ac850e..9d37d9ee58 100644 --- a/charts/dbforpostgresqlazurekubedbcom-firewallrule-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-firewallrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"firewallrules"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FirewallRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-firewallrule-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-firewallrule-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-firewallrule-editor/README.md index 9251b406e7..14bdb13931 100644 --- a/charts/dbforpostgresqlazurekubedbcom-firewallrule-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-firewallrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor --version=v0.23.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-firewallrule-editor appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor --version=v0.24.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-firewallrule-editor appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FirewallRule Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-firewallrule-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-firewallrule-editor appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-firewallrule-editor appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FirewallRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-firewallrule-editor appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-firewallrule-editor appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-firewallrule-editor appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-firewallrule-editor appscode/dbforpostgresqlazurekubedbcom-firewallrule-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-flexibleserver-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-flexibleserver-editor/Chart.yaml index d86e95f1a5..a3c5417686 100644 --- a/charts/dbforpostgresqlazurekubedbcom-flexibleserver-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-flexibleserver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"flexibleservers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FlexibleServer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-flexibleserver-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-flexibleserver-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-flexibleserver-editor/README.md index 37f0d8717d..c13527389d 100644 --- a/charts/dbforpostgresqlazurekubedbcom-flexibleserver-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-flexibleserver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor --version=v0.23.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserver-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor --version=v0.24.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserver-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlexibleServer Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-flexibleserver-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserver-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserver-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FlexibleServer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserver-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserver-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserver-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserver-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserver-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor/Chart.yaml index 25212074b6..9fe78f365c 100644 --- a/charts/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"flexibleserverconfigurations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FlexibleServerConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor/README.md index 19312a57c8..98c8ea9a25 100644 --- a/charts/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor --version=v0.23.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor --version=v0.24.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlexibleServerConfiguration Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FlexibleServerConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverconfiguration-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor/Chart.yaml index 82bb4fc95a..be4b0e49c4 100644 --- a/charts/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"flexibleserverdatabases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FlexibleServerDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor/README.md index 3f9326d967..1eb90f6a82 100644 --- a/charts/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor --version=v0.23.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor --version=v0.24.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlexibleServerDatabase Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FlexibleServerDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverdatabase-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor/Chart.yaml index 5c222494e9..a798546e0e 100644 --- a/charts/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"flexibleserverfirewallrules"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FlexibleServerFirewallRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor/README.md index 8000ee16e6..b2e492c280 100644 --- a/charts/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor --version=v0.23.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor --version=v0.24.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlexibleServerFirewallRule Editor on a [Kubernetes](http:// To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FlexibleServerFirewallRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor appscode/dbforpostgresqlazurekubedbcom-flexibleserverfirewallrule-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-server-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-server-editor/Chart.yaml index a3422ad4a1..418b61bd6f 100644 --- a/charts/dbforpostgresqlazurekubedbcom-server-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-server-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"servers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Server Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-server-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-server-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-server-editor/README.md index 55041a7931..dd53b868b9 100644 --- a/charts/dbforpostgresqlazurekubedbcom-server-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-server-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-server-editor --version=v0.23.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-server-editor appscode/dbforpostgresqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-server-editor --version=v0.24.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-server-editor appscode/dbforpostgresqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Server Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-server-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-server-editor appscode/dbforpostgresqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-server-editor appscode/dbforpostgresqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Server Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-server-editor appscode/dbforpostgresqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-server-editor appscode/dbforpostgresqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-server-editor appscode/dbforpostgresqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-server-editor appscode/dbforpostgresqlazurekubedbcom-server-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-serverkey-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-serverkey-editor/Chart.yaml index 4adb733105..0a101aa787 100644 --- a/charts/dbforpostgresqlazurekubedbcom-serverkey-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-serverkey-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"serverkeys"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ServerKey Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-serverkey-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-serverkey-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-serverkey-editor/README.md index 85a7e5e565..1ad9764c73 100644 --- a/charts/dbforpostgresqlazurekubedbcom-serverkey-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-serverkey-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-serverkey-editor --version=v0.23.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-serverkey-editor appscode/dbforpostgresqlazurekubedbcom-serverkey-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-serverkey-editor --version=v0.24.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-serverkey-editor appscode/dbforpostgresqlazurekubedbcom-serverkey-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ServerKey Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-serverkey-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-serverkey-editor appscode/dbforpostgresqlazurekubedbcom-serverkey-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-serverkey-editor appscode/dbforpostgresqlazurekubedbcom-serverkey-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ServerKey Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-serverkey-editor appscode/dbforpostgresqlazurekubedbcom-serverkey-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-serverkey-editor appscode/dbforpostgresqlazurekubedbcom-serverkey-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-serverkey-editor appscode/dbforpostgresqlazurekubedbcom-serverkey-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-serverkey-editor appscode/dbforpostgresqlazurekubedbcom-serverkey-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor/Chart.yaml b/charts/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor/Chart.yaml index be78b88d66..d8b766a159 100644 --- a/charts/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor/Chart.yaml +++ b/charts/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dbforpostgresql.azure.kubedb.com","version":"v1alpha1","resource":"virtualnetworkrules"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VirtualNetworkRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor/README.md b/charts/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor/README.md index fce9ad9fa2..9d83600bcd 100644 --- a/charts/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor/README.md +++ b/charts/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor --version=v0.23.0 -$ helm upgrade -i dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor --version=v0.24.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VirtualNetworkRule Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor`: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VirtualNetworkRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dbforpostgresqlazu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dbforpostgresql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor appscode/dbforpostgresqlazurekubedbcom-virtualnetworkrule-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/discoveryk8sio-endpointslice-editor/Chart.yaml b/charts/discoveryk8sio-endpointslice-editor/Chart.yaml index 48961481b9..c35f598a2a 100644 --- a/charts/discoveryk8sio-endpointslice-editor/Chart.yaml +++ b/charts/discoveryk8sio-endpointslice-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"discovery.k8s.io","version":"v1","resource":"endpointslices"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: EndpointSlice Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: discoveryk8sio-endpointslice-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/discoveryk8sio-endpointslice-editor/README.md b/charts/discoveryk8sio-endpointslice-editor/README.md index d00cb9da9d..618936fc1d 100644 --- a/charts/discoveryk8sio-endpointslice-editor/README.md +++ b/charts/discoveryk8sio-endpointslice-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/discoveryk8sio-endpointslice-editor --version=v0.23.0 -$ helm upgrade -i discoveryk8sio-endpointslice-editor appscode/discoveryk8sio-endpointslice-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/discoveryk8sio-endpointslice-editor --version=v0.24.0 +$ helm upgrade -i discoveryk8sio-endpointslice-editor appscode/discoveryk8sio-endpointslice-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EndpointSlice Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `discoveryk8sio-endpointslice-editor`: ```bash -$ helm upgrade -i discoveryk8sio-endpointslice-editor appscode/discoveryk8sio-endpointslice-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i discoveryk8sio-endpointslice-editor appscode/discoveryk8sio-endpointslice-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a EndpointSlice Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `discoveryk8sio-end Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i discoveryk8sio-endpointslice-editor appscode/discoveryk8sio-endpointslice-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=discovery.k8s.io/v1 +$ helm upgrade -i discoveryk8sio-endpointslice-editor appscode/discoveryk8sio-endpointslice-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=discovery.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i discoveryk8sio-endpointslice-editor appscode/discoveryk8sio-endpointslice-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i discoveryk8sio-endpointslice-editor appscode/discoveryk8sio-endpointslice-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/docdbawskubedbcom-cluster-editor/Chart.yaml b/charts/docdbawskubedbcom-cluster-editor/Chart.yaml index 1f2282e939..7142b670e4 100644 --- a/charts/docdbawskubedbcom-cluster-editor/Chart.yaml +++ b/charts/docdbawskubedbcom-cluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"docdb.aws.kubedb.com","version":"v1alpha1","resource":"clusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Cluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: docdbawskubedbcom-cluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/docdbawskubedbcom-cluster-editor/README.md b/charts/docdbawskubedbcom-cluster-editor/README.md index 583719f820..fab5b09d5f 100644 --- a/charts/docdbawskubedbcom-cluster-editor/README.md +++ b/charts/docdbawskubedbcom-cluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/docdbawskubedbcom-cluster-editor --version=v0.23.0 -$ helm upgrade -i docdbawskubedbcom-cluster-editor appscode/docdbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/docdbawskubedbcom-cluster-editor --version=v0.24.0 +$ helm upgrade -i docdbawskubedbcom-cluster-editor appscode/docdbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cluster Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `docdbawskubedbcom-cluster-editor`: ```bash -$ helm upgrade -i docdbawskubedbcom-cluster-editor appscode/docdbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i docdbawskubedbcom-cluster-editor appscode/docdbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Cluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `docdbawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-cluster-editor appscode/docdbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i docdbawskubedbcom-cluster-editor appscode/docdbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-cluster-editor appscode/docdbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i docdbawskubedbcom-cluster-editor appscode/docdbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/docdbawskubedbcom-clusterinstance-editor/Chart.yaml b/charts/docdbawskubedbcom-clusterinstance-editor/Chart.yaml index 07ee7e0f9f..6080a48788 100644 --- a/charts/docdbawskubedbcom-clusterinstance-editor/Chart.yaml +++ b/charts/docdbawskubedbcom-clusterinstance-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"docdb.aws.kubedb.com","version":"v1alpha1","resource":"clusterinstances"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterInstance Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: docdbawskubedbcom-clusterinstance-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/docdbawskubedbcom-clusterinstance-editor/README.md b/charts/docdbawskubedbcom-clusterinstance-editor/README.md index 588c1b37e0..239df4cc73 100644 --- a/charts/docdbawskubedbcom-clusterinstance-editor/README.md +++ b/charts/docdbawskubedbcom-clusterinstance-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/docdbawskubedbcom-clusterinstance-editor --version=v0.23.0 -$ helm upgrade -i docdbawskubedbcom-clusterinstance-editor appscode/docdbawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/docdbawskubedbcom-clusterinstance-editor --version=v0.24.0 +$ helm upgrade -i docdbawskubedbcom-clusterinstance-editor appscode/docdbawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterInstance Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `docdbawskubedbcom-clusterinstance-editor`: ```bash -$ helm upgrade -i docdbawskubedbcom-clusterinstance-editor appscode/docdbawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i docdbawskubedbcom-clusterinstance-editor appscode/docdbawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterInstance Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `docdbawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-clusterinstance-editor appscode/docdbawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i docdbawskubedbcom-clusterinstance-editor appscode/docdbawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-clusterinstance-editor appscode/docdbawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i docdbawskubedbcom-clusterinstance-editor appscode/docdbawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/docdbawskubedbcom-clusterparametergroup-editor/Chart.yaml b/charts/docdbawskubedbcom-clusterparametergroup-editor/Chart.yaml index 9040e6a402..9eb532d343 100644 --- a/charts/docdbawskubedbcom-clusterparametergroup-editor/Chart.yaml +++ b/charts/docdbawskubedbcom-clusterparametergroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"docdb.aws.kubedb.com","version":"v1alpha1","resource":"clusterparametergroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterParameterGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: docdbawskubedbcom-clusterparametergroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/docdbawskubedbcom-clusterparametergroup-editor/README.md b/charts/docdbawskubedbcom-clusterparametergroup-editor/README.md index 3bc58a375d..9011024aee 100644 --- a/charts/docdbawskubedbcom-clusterparametergroup-editor/README.md +++ b/charts/docdbawskubedbcom-clusterparametergroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/docdbawskubedbcom-clusterparametergroup-editor --version=v0.23.0 -$ helm upgrade -i docdbawskubedbcom-clusterparametergroup-editor appscode/docdbawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/docdbawskubedbcom-clusterparametergroup-editor --version=v0.24.0 +$ helm upgrade -i docdbawskubedbcom-clusterparametergroup-editor appscode/docdbawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterParameterGroup Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `docdbawskubedbcom-clusterparametergroup-editor`: ```bash -$ helm upgrade -i docdbawskubedbcom-clusterparametergroup-editor appscode/docdbawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i docdbawskubedbcom-clusterparametergroup-editor appscode/docdbawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterParameterGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `docdbawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-clusterparametergroup-editor appscode/docdbawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i docdbawskubedbcom-clusterparametergroup-editor appscode/docdbawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-clusterparametergroup-editor appscode/docdbawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i docdbawskubedbcom-clusterparametergroup-editor appscode/docdbawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/docdbawskubedbcom-clustersnapshot-editor/Chart.yaml b/charts/docdbawskubedbcom-clustersnapshot-editor/Chart.yaml index 07e8047917..1359d9036d 100644 --- a/charts/docdbawskubedbcom-clustersnapshot-editor/Chart.yaml +++ b/charts/docdbawskubedbcom-clustersnapshot-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"docdb.aws.kubedb.com","version":"v1alpha1","resource":"clustersnapshots"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterSnapshot Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: docdbawskubedbcom-clustersnapshot-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/docdbawskubedbcom-clustersnapshot-editor/README.md b/charts/docdbawskubedbcom-clustersnapshot-editor/README.md index 47194c36bd..d7f4314803 100644 --- a/charts/docdbawskubedbcom-clustersnapshot-editor/README.md +++ b/charts/docdbawskubedbcom-clustersnapshot-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/docdbawskubedbcom-clustersnapshot-editor --version=v0.23.0 -$ helm upgrade -i docdbawskubedbcom-clustersnapshot-editor appscode/docdbawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/docdbawskubedbcom-clustersnapshot-editor --version=v0.24.0 +$ helm upgrade -i docdbawskubedbcom-clustersnapshot-editor appscode/docdbawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterSnapshot Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `docdbawskubedbcom-clustersnapshot-editor`: ```bash -$ helm upgrade -i docdbawskubedbcom-clustersnapshot-editor appscode/docdbawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i docdbawskubedbcom-clustersnapshot-editor appscode/docdbawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterSnapshot Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `docdbawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-clustersnapshot-editor appscode/docdbawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i docdbawskubedbcom-clustersnapshot-editor appscode/docdbawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-clustersnapshot-editor appscode/docdbawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i docdbawskubedbcom-clustersnapshot-editor appscode/docdbawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/docdbawskubedbcom-eventsubscription-editor/Chart.yaml b/charts/docdbawskubedbcom-eventsubscription-editor/Chart.yaml index 53bc30b50b..5df36c6a3e 100644 --- a/charts/docdbawskubedbcom-eventsubscription-editor/Chart.yaml +++ b/charts/docdbawskubedbcom-eventsubscription-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"docdb.aws.kubedb.com","version":"v1alpha1","resource":"eventsubscriptions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: EventSubscription Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: docdbawskubedbcom-eventsubscription-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/docdbawskubedbcom-eventsubscription-editor/README.md b/charts/docdbawskubedbcom-eventsubscription-editor/README.md index b41807f124..49e165b751 100644 --- a/charts/docdbawskubedbcom-eventsubscription-editor/README.md +++ b/charts/docdbawskubedbcom-eventsubscription-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/docdbawskubedbcom-eventsubscription-editor --version=v0.23.0 -$ helm upgrade -i docdbawskubedbcom-eventsubscription-editor appscode/docdbawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/docdbawskubedbcom-eventsubscription-editor --version=v0.24.0 +$ helm upgrade -i docdbawskubedbcom-eventsubscription-editor appscode/docdbawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EventSubscription Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `docdbawskubedbcom-eventsubscription-editor`: ```bash -$ helm upgrade -i docdbawskubedbcom-eventsubscription-editor appscode/docdbawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i docdbawskubedbcom-eventsubscription-editor appscode/docdbawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a EventSubscription Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `docdbawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-eventsubscription-editor appscode/docdbawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i docdbawskubedbcom-eventsubscription-editor appscode/docdbawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-eventsubscription-editor appscode/docdbawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i docdbawskubedbcom-eventsubscription-editor appscode/docdbawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/docdbawskubedbcom-globalcluster-editor/Chart.yaml b/charts/docdbawskubedbcom-globalcluster-editor/Chart.yaml index 2ad8159ce4..f57c75d0d8 100644 --- a/charts/docdbawskubedbcom-globalcluster-editor/Chart.yaml +++ b/charts/docdbawskubedbcom-globalcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"docdb.aws.kubedb.com","version":"v1alpha1","resource":"globalclusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GlobalCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: docdbawskubedbcom-globalcluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/docdbawskubedbcom-globalcluster-editor/README.md b/charts/docdbawskubedbcom-globalcluster-editor/README.md index 4f6fba6761..4b9b17c4c5 100644 --- a/charts/docdbawskubedbcom-globalcluster-editor/README.md +++ b/charts/docdbawskubedbcom-globalcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/docdbawskubedbcom-globalcluster-editor --version=v0.23.0 -$ helm upgrade -i docdbawskubedbcom-globalcluster-editor appscode/docdbawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/docdbawskubedbcom-globalcluster-editor --version=v0.24.0 +$ helm upgrade -i docdbawskubedbcom-globalcluster-editor appscode/docdbawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GlobalCluster Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `docdbawskubedbcom-globalcluster-editor`: ```bash -$ helm upgrade -i docdbawskubedbcom-globalcluster-editor appscode/docdbawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i docdbawskubedbcom-globalcluster-editor appscode/docdbawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GlobalCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `docdbawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-globalcluster-editor appscode/docdbawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i docdbawskubedbcom-globalcluster-editor appscode/docdbawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-globalcluster-editor appscode/docdbawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i docdbawskubedbcom-globalcluster-editor appscode/docdbawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/docdbawskubedbcom-subnetgroup-editor/Chart.yaml b/charts/docdbawskubedbcom-subnetgroup-editor/Chart.yaml index 6b9a690756..9bcd12eab4 100644 --- a/charts/docdbawskubedbcom-subnetgroup-editor/Chart.yaml +++ b/charts/docdbawskubedbcom-subnetgroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"docdb.aws.kubedb.com","version":"v1alpha1","resource":"subnetgroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SubnetGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: docdbawskubedbcom-subnetgroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/docdbawskubedbcom-subnetgroup-editor/README.md b/charts/docdbawskubedbcom-subnetgroup-editor/README.md index 4cb4115eae..d03466f093 100644 --- a/charts/docdbawskubedbcom-subnetgroup-editor/README.md +++ b/charts/docdbawskubedbcom-subnetgroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/docdbawskubedbcom-subnetgroup-editor --version=v0.23.0 -$ helm upgrade -i docdbawskubedbcom-subnetgroup-editor appscode/docdbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/docdbawskubedbcom-subnetgroup-editor --version=v0.24.0 +$ helm upgrade -i docdbawskubedbcom-subnetgroup-editor appscode/docdbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SubnetGroup Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `docdbawskubedbcom-subnetgroup-editor`: ```bash -$ helm upgrade -i docdbawskubedbcom-subnetgroup-editor appscode/docdbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i docdbawskubedbcom-subnetgroup-editor appscode/docdbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SubnetGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `docdbawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-subnetgroup-editor appscode/docdbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i docdbawskubedbcom-subnetgroup-editor appscode/docdbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=docdb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i docdbawskubedbcom-subnetgroup-editor appscode/docdbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i docdbawskubedbcom-subnetgroup-editor appscode/docdbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/driversxhelmdev-apprelease-editor/Chart.yaml b/charts/driversxhelmdev-apprelease-editor/Chart.yaml index ea03bdf976..128586fa06 100644 --- a/charts/driversxhelmdev-apprelease-editor/Chart.yaml +++ b/charts/driversxhelmdev-apprelease-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"drivers.x-helm.dev","version":"v1alpha1","resource":"appreleases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AppRelease Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: driversxhelmdev-apprelease-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/driversxhelmdev-apprelease-editor/README.md b/charts/driversxhelmdev-apprelease-editor/README.md index 62a6d3ef97..51a73035b7 100644 --- a/charts/driversxhelmdev-apprelease-editor/README.md +++ b/charts/driversxhelmdev-apprelease-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/driversxhelmdev-apprelease-editor --version=v0.23.0 -$ helm upgrade -i driversxhelmdev-apprelease-editor appscode/driversxhelmdev-apprelease-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/driversxhelmdev-apprelease-editor --version=v0.24.0 +$ helm upgrade -i driversxhelmdev-apprelease-editor appscode/driversxhelmdev-apprelease-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AppRelease Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `driversxhelmdev-apprelease-editor`: ```bash -$ helm upgrade -i driversxhelmdev-apprelease-editor appscode/driversxhelmdev-apprelease-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i driversxhelmdev-apprelease-editor appscode/driversxhelmdev-apprelease-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AppRelease Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `driversxhelmdev-ap Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i driversxhelmdev-apprelease-editor appscode/driversxhelmdev-apprelease-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=drivers.x-helm.dev/v1alpha1 +$ helm upgrade -i driversxhelmdev-apprelease-editor appscode/driversxhelmdev-apprelease-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=drivers.x-helm.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i driversxhelmdev-apprelease-editor appscode/driversxhelmdev-apprelease-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i driversxhelmdev-apprelease-editor appscode/driversxhelmdev-apprelease-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dynamodbawskubedbcom-contributorinsights-editor/Chart.yaml b/charts/dynamodbawskubedbcom-contributorinsights-editor/Chart.yaml index b3a46048dc..f311924e4e 100644 --- a/charts/dynamodbawskubedbcom-contributorinsights-editor/Chart.yaml +++ b/charts/dynamodbawskubedbcom-contributorinsights-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dynamodb.aws.kubedb.com","version":"v1alpha1","resource":"contributorinsights"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ContributorInsights Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dynamodbawskubedbcom-contributorinsights-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dynamodbawskubedbcom-contributorinsights-editor/README.md b/charts/dynamodbawskubedbcom-contributorinsights-editor/README.md index e3f1a1517f..0f8d683f25 100644 --- a/charts/dynamodbawskubedbcom-contributorinsights-editor/README.md +++ b/charts/dynamodbawskubedbcom-contributorinsights-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dynamodbawskubedbcom-contributorinsights-editor --version=v0.23.0 -$ helm upgrade -i dynamodbawskubedbcom-contributorinsights-editor appscode/dynamodbawskubedbcom-contributorinsights-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dynamodbawskubedbcom-contributorinsights-editor --version=v0.24.0 +$ helm upgrade -i dynamodbawskubedbcom-contributorinsights-editor appscode/dynamodbawskubedbcom-contributorinsights-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ContributorInsights Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `dynamodbawskubedbcom-contributorinsights-editor`: ```bash -$ helm upgrade -i dynamodbawskubedbcom-contributorinsights-editor appscode/dynamodbawskubedbcom-contributorinsights-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dynamodbawskubedbcom-contributorinsights-editor appscode/dynamodbawskubedbcom-contributorinsights-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ContributorInsights Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dynamodbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-contributorinsights-editor appscode/dynamodbawskubedbcom-contributorinsights-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i dynamodbawskubedbcom-contributorinsights-editor appscode/dynamodbawskubedbcom-contributorinsights-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-contributorinsights-editor appscode/dynamodbawskubedbcom-contributorinsights-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dynamodbawskubedbcom-contributorinsights-editor appscode/dynamodbawskubedbcom-contributorinsights-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dynamodbawskubedbcom-globaltable-editor/Chart.yaml b/charts/dynamodbawskubedbcom-globaltable-editor/Chart.yaml index eef0c873bc..651d98b8cf 100644 --- a/charts/dynamodbawskubedbcom-globaltable-editor/Chart.yaml +++ b/charts/dynamodbawskubedbcom-globaltable-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dynamodb.aws.kubedb.com","version":"v1alpha1","resource":"globaltables"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GlobalTable Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dynamodbawskubedbcom-globaltable-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dynamodbawskubedbcom-globaltable-editor/README.md b/charts/dynamodbawskubedbcom-globaltable-editor/README.md index 9c58629740..286ae08a44 100644 --- a/charts/dynamodbawskubedbcom-globaltable-editor/README.md +++ b/charts/dynamodbawskubedbcom-globaltable-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dynamodbawskubedbcom-globaltable-editor --version=v0.23.0 -$ helm upgrade -i dynamodbawskubedbcom-globaltable-editor appscode/dynamodbawskubedbcom-globaltable-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dynamodbawskubedbcom-globaltable-editor --version=v0.24.0 +$ helm upgrade -i dynamodbawskubedbcom-globaltable-editor appscode/dynamodbawskubedbcom-globaltable-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GlobalTable Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `dynamodbawskubedbcom-globaltable-editor`: ```bash -$ helm upgrade -i dynamodbawskubedbcom-globaltable-editor appscode/dynamodbawskubedbcom-globaltable-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dynamodbawskubedbcom-globaltable-editor appscode/dynamodbawskubedbcom-globaltable-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GlobalTable Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dynamodbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-globaltable-editor appscode/dynamodbawskubedbcom-globaltable-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i dynamodbawskubedbcom-globaltable-editor appscode/dynamodbawskubedbcom-globaltable-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-globaltable-editor appscode/dynamodbawskubedbcom-globaltable-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dynamodbawskubedbcom-globaltable-editor appscode/dynamodbawskubedbcom-globaltable-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dynamodbawskubedbcom-kinesisstreamingdestination-editor/Chart.yaml b/charts/dynamodbawskubedbcom-kinesisstreamingdestination-editor/Chart.yaml index 1d2723caee..6b039a3276 100644 --- a/charts/dynamodbawskubedbcom-kinesisstreamingdestination-editor/Chart.yaml +++ b/charts/dynamodbawskubedbcom-kinesisstreamingdestination-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dynamodb.aws.kubedb.com","version":"v1alpha1","resource":"kinesisstreamingdestinations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: KinesisStreamingDestination Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dynamodbawskubedbcom-kinesisstreamingdestination-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dynamodbawskubedbcom-kinesisstreamingdestination-editor/README.md b/charts/dynamodbawskubedbcom-kinesisstreamingdestination-editor/README.md index 2c2cf16020..73f11f6fe8 100644 --- a/charts/dynamodbawskubedbcom-kinesisstreamingdestination-editor/README.md +++ b/charts/dynamodbawskubedbcom-kinesisstreamingdestination-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor --version=v0.23.0 -$ helm upgrade -i dynamodbawskubedbcom-kinesisstreamingdestination-editor appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor --version=v0.24.0 +$ helm upgrade -i dynamodbawskubedbcom-kinesisstreamingdestination-editor appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KinesisStreamingDestination Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `dynamodbawskubedbcom-kinesisstreamingdestination-editor`: ```bash -$ helm upgrade -i dynamodbawskubedbcom-kinesisstreamingdestination-editor appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dynamodbawskubedbcom-kinesisstreamingdestination-editor appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a KinesisStreamingDestination Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dynamodbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-kinesisstreamingdestination-editor appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i dynamodbawskubedbcom-kinesisstreamingdestination-editor appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-kinesisstreamingdestination-editor appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dynamodbawskubedbcom-kinesisstreamingdestination-editor appscode/dynamodbawskubedbcom-kinesisstreamingdestination-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dynamodbawskubedbcom-table-editor/Chart.yaml b/charts/dynamodbawskubedbcom-table-editor/Chart.yaml index 63ff82b466..72f605136b 100644 --- a/charts/dynamodbawskubedbcom-table-editor/Chart.yaml +++ b/charts/dynamodbawskubedbcom-table-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dynamodb.aws.kubedb.com","version":"v1alpha1","resource":"tables"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Table Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dynamodbawskubedbcom-table-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dynamodbawskubedbcom-table-editor/README.md b/charts/dynamodbawskubedbcom-table-editor/README.md index d02bb7d87a..35170c0d79 100644 --- a/charts/dynamodbawskubedbcom-table-editor/README.md +++ b/charts/dynamodbawskubedbcom-table-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dynamodbawskubedbcom-table-editor --version=v0.23.0 -$ helm upgrade -i dynamodbawskubedbcom-table-editor appscode/dynamodbawskubedbcom-table-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dynamodbawskubedbcom-table-editor --version=v0.24.0 +$ helm upgrade -i dynamodbawskubedbcom-table-editor appscode/dynamodbawskubedbcom-table-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Table Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `dynamodbawskubedbcom-table-editor`: ```bash -$ helm upgrade -i dynamodbawskubedbcom-table-editor appscode/dynamodbawskubedbcom-table-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dynamodbawskubedbcom-table-editor appscode/dynamodbawskubedbcom-table-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Table Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dynamodbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-table-editor appscode/dynamodbawskubedbcom-table-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i dynamodbawskubedbcom-table-editor appscode/dynamodbawskubedbcom-table-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-table-editor appscode/dynamodbawskubedbcom-table-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dynamodbawskubedbcom-table-editor appscode/dynamodbawskubedbcom-table-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dynamodbawskubedbcom-tableitem-editor/Chart.yaml b/charts/dynamodbawskubedbcom-tableitem-editor/Chart.yaml index 9679add21e..f35d597f2a 100644 --- a/charts/dynamodbawskubedbcom-tableitem-editor/Chart.yaml +++ b/charts/dynamodbawskubedbcom-tableitem-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dynamodb.aws.kubedb.com","version":"v1alpha1","resource":"tableitems"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: TableItem Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dynamodbawskubedbcom-tableitem-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dynamodbawskubedbcom-tableitem-editor/README.md b/charts/dynamodbawskubedbcom-tableitem-editor/README.md index 799e10fef4..3c74436969 100644 --- a/charts/dynamodbawskubedbcom-tableitem-editor/README.md +++ b/charts/dynamodbawskubedbcom-tableitem-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dynamodbawskubedbcom-tableitem-editor --version=v0.23.0 -$ helm upgrade -i dynamodbawskubedbcom-tableitem-editor appscode/dynamodbawskubedbcom-tableitem-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dynamodbawskubedbcom-tableitem-editor --version=v0.24.0 +$ helm upgrade -i dynamodbawskubedbcom-tableitem-editor appscode/dynamodbawskubedbcom-tableitem-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a TableItem Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `dynamodbawskubedbcom-tableitem-editor`: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tableitem-editor appscode/dynamodbawskubedbcom-tableitem-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dynamodbawskubedbcom-tableitem-editor appscode/dynamodbawskubedbcom-tableitem-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a TableItem Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dynamodbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tableitem-editor appscode/dynamodbawskubedbcom-tableitem-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i dynamodbawskubedbcom-tableitem-editor appscode/dynamodbawskubedbcom-tableitem-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tableitem-editor appscode/dynamodbawskubedbcom-tableitem-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dynamodbawskubedbcom-tableitem-editor appscode/dynamodbawskubedbcom-tableitem-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dynamodbawskubedbcom-tablereplica-editor/Chart.yaml b/charts/dynamodbawskubedbcom-tablereplica-editor/Chart.yaml index 0090d39127..0a4b198777 100644 --- a/charts/dynamodbawskubedbcom-tablereplica-editor/Chart.yaml +++ b/charts/dynamodbawskubedbcom-tablereplica-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dynamodb.aws.kubedb.com","version":"v1alpha1","resource":"tablereplicas"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: TableReplica Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dynamodbawskubedbcom-tablereplica-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dynamodbawskubedbcom-tablereplica-editor/README.md b/charts/dynamodbawskubedbcom-tablereplica-editor/README.md index 1c95440e58..180d15484a 100644 --- a/charts/dynamodbawskubedbcom-tablereplica-editor/README.md +++ b/charts/dynamodbawskubedbcom-tablereplica-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dynamodbawskubedbcom-tablereplica-editor --version=v0.23.0 -$ helm upgrade -i dynamodbawskubedbcom-tablereplica-editor appscode/dynamodbawskubedbcom-tablereplica-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dynamodbawskubedbcom-tablereplica-editor --version=v0.24.0 +$ helm upgrade -i dynamodbawskubedbcom-tablereplica-editor appscode/dynamodbawskubedbcom-tablereplica-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a TableReplica Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `dynamodbawskubedbcom-tablereplica-editor`: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tablereplica-editor appscode/dynamodbawskubedbcom-tablereplica-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dynamodbawskubedbcom-tablereplica-editor appscode/dynamodbawskubedbcom-tablereplica-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a TableReplica Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dynamodbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tablereplica-editor appscode/dynamodbawskubedbcom-tablereplica-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i dynamodbawskubedbcom-tablereplica-editor appscode/dynamodbawskubedbcom-tablereplica-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tablereplica-editor appscode/dynamodbawskubedbcom-tablereplica-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dynamodbawskubedbcom-tablereplica-editor appscode/dynamodbawskubedbcom-tablereplica-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/dynamodbawskubedbcom-tag-editor/Chart.yaml b/charts/dynamodbawskubedbcom-tag-editor/Chart.yaml index 1724353ca0..3689b5646f 100644 --- a/charts/dynamodbawskubedbcom-tag-editor/Chart.yaml +++ b/charts/dynamodbawskubedbcom-tag-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"dynamodb.aws.kubedb.com","version":"v1alpha1","resource":"tags"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Tag Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: dynamodbawskubedbcom-tag-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/dynamodbawskubedbcom-tag-editor/README.md b/charts/dynamodbawskubedbcom-tag-editor/README.md index 8369f2b946..04a92bb487 100644 --- a/charts/dynamodbawskubedbcom-tag-editor/README.md +++ b/charts/dynamodbawskubedbcom-tag-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/dynamodbawskubedbcom-tag-editor --version=v0.23.0 -$ helm upgrade -i dynamodbawskubedbcom-tag-editor appscode/dynamodbawskubedbcom-tag-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/dynamodbawskubedbcom-tag-editor --version=v0.24.0 +$ helm upgrade -i dynamodbawskubedbcom-tag-editor appscode/dynamodbawskubedbcom-tag-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Tag Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `dynamodbawskubedbcom-tag-editor`: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tag-editor appscode/dynamodbawskubedbcom-tag-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i dynamodbawskubedbcom-tag-editor appscode/dynamodbawskubedbcom-tag-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Tag Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `dynamodbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tag-editor appscode/dynamodbawskubedbcom-tag-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i dynamodbawskubedbcom-tag-editor appscode/dynamodbawskubedbcom-tag-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=dynamodb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i dynamodbawskubedbcom-tag-editor appscode/dynamodbawskubedbcom-tag-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i dynamodbawskubedbcom-tag-editor appscode/dynamodbawskubedbcom-tag-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/ec2awskubedbcom-route-editor/Chart.yaml b/charts/ec2awskubedbcom-route-editor/Chart.yaml index 5638bd60ad..e08d6751d2 100644 --- a/charts/ec2awskubedbcom-route-editor/Chart.yaml +++ b/charts/ec2awskubedbcom-route-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ec2.aws.kubedb.com","version":"v1alpha1","resource":"routes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Route Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ec2awskubedbcom-route-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/ec2awskubedbcom-route-editor/README.md b/charts/ec2awskubedbcom-route-editor/README.md index 77574f09b7..0b8c97d869 100644 --- a/charts/ec2awskubedbcom-route-editor/README.md +++ b/charts/ec2awskubedbcom-route-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ec2awskubedbcom-route-editor --version=v0.23.0 -$ helm upgrade -i ec2awskubedbcom-route-editor appscode/ec2awskubedbcom-route-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/ec2awskubedbcom-route-editor --version=v0.24.0 +$ helm upgrade -i ec2awskubedbcom-route-editor appscode/ec2awskubedbcom-route-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Route Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `ec2awskubedbcom-route-editor`: ```bash -$ helm upgrade -i ec2awskubedbcom-route-editor appscode/ec2awskubedbcom-route-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i ec2awskubedbcom-route-editor appscode/ec2awskubedbcom-route-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Route Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ec2awskubedbcom-ro Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-route-editor appscode/ec2awskubedbcom-route-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 +$ helm upgrade -i ec2awskubedbcom-route-editor appscode/ec2awskubedbcom-route-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-route-editor appscode/ec2awskubedbcom-route-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i ec2awskubedbcom-route-editor appscode/ec2awskubedbcom-route-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/ec2awskubedbcom-securitygroup-editor/Chart.yaml b/charts/ec2awskubedbcom-securitygroup-editor/Chart.yaml index eebff13c22..4e513a0240 100644 --- a/charts/ec2awskubedbcom-securitygroup-editor/Chart.yaml +++ b/charts/ec2awskubedbcom-securitygroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ec2.aws.kubedb.com","version":"v1alpha1","resource":"securitygroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SecurityGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ec2awskubedbcom-securitygroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/ec2awskubedbcom-securitygroup-editor/README.md b/charts/ec2awskubedbcom-securitygroup-editor/README.md index ee90736cc4..b7d1cb3583 100644 --- a/charts/ec2awskubedbcom-securitygroup-editor/README.md +++ b/charts/ec2awskubedbcom-securitygroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ec2awskubedbcom-securitygroup-editor --version=v0.23.0 -$ helm upgrade -i ec2awskubedbcom-securitygroup-editor appscode/ec2awskubedbcom-securitygroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/ec2awskubedbcom-securitygroup-editor --version=v0.24.0 +$ helm upgrade -i ec2awskubedbcom-securitygroup-editor appscode/ec2awskubedbcom-securitygroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecurityGroup Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `ec2awskubedbcom-securitygroup-editor`: ```bash -$ helm upgrade -i ec2awskubedbcom-securitygroup-editor appscode/ec2awskubedbcom-securitygroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i ec2awskubedbcom-securitygroup-editor appscode/ec2awskubedbcom-securitygroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SecurityGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ec2awskubedbcom-se Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-securitygroup-editor appscode/ec2awskubedbcom-securitygroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 +$ helm upgrade -i ec2awskubedbcom-securitygroup-editor appscode/ec2awskubedbcom-securitygroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-securitygroup-editor appscode/ec2awskubedbcom-securitygroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i ec2awskubedbcom-securitygroup-editor appscode/ec2awskubedbcom-securitygroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/ec2awskubedbcom-securitygrouprule-editor/Chart.yaml b/charts/ec2awskubedbcom-securitygrouprule-editor/Chart.yaml index 0f5759e44c..f76f4d05f7 100644 --- a/charts/ec2awskubedbcom-securitygrouprule-editor/Chart.yaml +++ b/charts/ec2awskubedbcom-securitygrouprule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ec2.aws.kubedb.com","version":"v1alpha1","resource":"securitygrouprules"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SecurityGroupRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ec2awskubedbcom-securitygrouprule-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/ec2awskubedbcom-securitygrouprule-editor/README.md b/charts/ec2awskubedbcom-securitygrouprule-editor/README.md index d1747558e5..c81900d74e 100644 --- a/charts/ec2awskubedbcom-securitygrouprule-editor/README.md +++ b/charts/ec2awskubedbcom-securitygrouprule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ec2awskubedbcom-securitygrouprule-editor --version=v0.23.0 -$ helm upgrade -i ec2awskubedbcom-securitygrouprule-editor appscode/ec2awskubedbcom-securitygrouprule-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/ec2awskubedbcom-securitygrouprule-editor --version=v0.24.0 +$ helm upgrade -i ec2awskubedbcom-securitygrouprule-editor appscode/ec2awskubedbcom-securitygrouprule-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecurityGroupRule Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `ec2awskubedbcom-securitygrouprule-editor`: ```bash -$ helm upgrade -i ec2awskubedbcom-securitygrouprule-editor appscode/ec2awskubedbcom-securitygrouprule-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i ec2awskubedbcom-securitygrouprule-editor appscode/ec2awskubedbcom-securitygrouprule-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SecurityGroupRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ec2awskubedbcom-se Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-securitygrouprule-editor appscode/ec2awskubedbcom-securitygrouprule-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 +$ helm upgrade -i ec2awskubedbcom-securitygrouprule-editor appscode/ec2awskubedbcom-securitygrouprule-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-securitygrouprule-editor appscode/ec2awskubedbcom-securitygrouprule-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i ec2awskubedbcom-securitygrouprule-editor appscode/ec2awskubedbcom-securitygrouprule-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/ec2awskubedbcom-subnet-editor/Chart.yaml b/charts/ec2awskubedbcom-subnet-editor/Chart.yaml index b4f1a3b96a..abaacc78f5 100644 --- a/charts/ec2awskubedbcom-subnet-editor/Chart.yaml +++ b/charts/ec2awskubedbcom-subnet-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ec2.aws.kubedb.com","version":"v1alpha1","resource":"subnets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Subnet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ec2awskubedbcom-subnet-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/ec2awskubedbcom-subnet-editor/README.md b/charts/ec2awskubedbcom-subnet-editor/README.md index 2a2e6e4b9d..819492507d 100644 --- a/charts/ec2awskubedbcom-subnet-editor/README.md +++ b/charts/ec2awskubedbcom-subnet-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ec2awskubedbcom-subnet-editor --version=v0.23.0 -$ helm upgrade -i ec2awskubedbcom-subnet-editor appscode/ec2awskubedbcom-subnet-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/ec2awskubedbcom-subnet-editor --version=v0.24.0 +$ helm upgrade -i ec2awskubedbcom-subnet-editor appscode/ec2awskubedbcom-subnet-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Subnet Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `ec2awskubedbcom-subnet-editor`: ```bash -$ helm upgrade -i ec2awskubedbcom-subnet-editor appscode/ec2awskubedbcom-subnet-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i ec2awskubedbcom-subnet-editor appscode/ec2awskubedbcom-subnet-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Subnet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ec2awskubedbcom-su Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-subnet-editor appscode/ec2awskubedbcom-subnet-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 +$ helm upgrade -i ec2awskubedbcom-subnet-editor appscode/ec2awskubedbcom-subnet-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-subnet-editor appscode/ec2awskubedbcom-subnet-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i ec2awskubedbcom-subnet-editor appscode/ec2awskubedbcom-subnet-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/ec2awskubedbcom-vpc-editor/Chart.yaml b/charts/ec2awskubedbcom-vpc-editor/Chart.yaml index 768adffd1a..aa54fa0d42 100644 --- a/charts/ec2awskubedbcom-vpc-editor/Chart.yaml +++ b/charts/ec2awskubedbcom-vpc-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ec2.aws.kubedb.com","version":"v1alpha1","resource":"vpcs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VPC Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ec2awskubedbcom-vpc-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/ec2awskubedbcom-vpc-editor/README.md b/charts/ec2awskubedbcom-vpc-editor/README.md index 88cb14bd7f..7ece0e8522 100644 --- a/charts/ec2awskubedbcom-vpc-editor/README.md +++ b/charts/ec2awskubedbcom-vpc-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ec2awskubedbcom-vpc-editor --version=v0.23.0 -$ helm upgrade -i ec2awskubedbcom-vpc-editor appscode/ec2awskubedbcom-vpc-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/ec2awskubedbcom-vpc-editor --version=v0.24.0 +$ helm upgrade -i ec2awskubedbcom-vpc-editor appscode/ec2awskubedbcom-vpc-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VPC Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `ec2awskubedbcom-vpc-editor`: ```bash -$ helm upgrade -i ec2awskubedbcom-vpc-editor appscode/ec2awskubedbcom-vpc-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i ec2awskubedbcom-vpc-editor appscode/ec2awskubedbcom-vpc-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VPC Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ec2awskubedbcom-vp Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-vpc-editor appscode/ec2awskubedbcom-vpc-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 +$ helm upgrade -i ec2awskubedbcom-vpc-editor appscode/ec2awskubedbcom-vpc-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-vpc-editor appscode/ec2awskubedbcom-vpc-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i ec2awskubedbcom-vpc-editor appscode/ec2awskubedbcom-vpc-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/ec2awskubedbcom-vpcendpoint-editor/Chart.yaml b/charts/ec2awskubedbcom-vpcendpoint-editor/Chart.yaml index 4923a90c8a..bc421a9a4c 100644 --- a/charts/ec2awskubedbcom-vpcendpoint-editor/Chart.yaml +++ b/charts/ec2awskubedbcom-vpcendpoint-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ec2.aws.kubedb.com","version":"v1alpha1","resource":"vpcendpoints"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VPCEndpoint Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ec2awskubedbcom-vpcendpoint-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/ec2awskubedbcom-vpcendpoint-editor/README.md b/charts/ec2awskubedbcom-vpcendpoint-editor/README.md index 5be60285d8..936ee78d3c 100644 --- a/charts/ec2awskubedbcom-vpcendpoint-editor/README.md +++ b/charts/ec2awskubedbcom-vpcendpoint-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ec2awskubedbcom-vpcendpoint-editor --version=v0.23.0 -$ helm upgrade -i ec2awskubedbcom-vpcendpoint-editor appscode/ec2awskubedbcom-vpcendpoint-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/ec2awskubedbcom-vpcendpoint-editor --version=v0.24.0 +$ helm upgrade -i ec2awskubedbcom-vpcendpoint-editor appscode/ec2awskubedbcom-vpcendpoint-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VPCEndpoint Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `ec2awskubedbcom-vpcendpoint-editor`: ```bash -$ helm upgrade -i ec2awskubedbcom-vpcendpoint-editor appscode/ec2awskubedbcom-vpcendpoint-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i ec2awskubedbcom-vpcendpoint-editor appscode/ec2awskubedbcom-vpcendpoint-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VPCEndpoint Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ec2awskubedbcom-vp Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-vpcendpoint-editor appscode/ec2awskubedbcom-vpcendpoint-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 +$ helm upgrade -i ec2awskubedbcom-vpcendpoint-editor appscode/ec2awskubedbcom-vpcendpoint-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-vpcendpoint-editor appscode/ec2awskubedbcom-vpcendpoint-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i ec2awskubedbcom-vpcendpoint-editor appscode/ec2awskubedbcom-vpcendpoint-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/ec2awskubedbcom-vpcpeeringconnection-editor/Chart.yaml b/charts/ec2awskubedbcom-vpcpeeringconnection-editor/Chart.yaml index 964a99e80b..05f7a3b366 100644 --- a/charts/ec2awskubedbcom-vpcpeeringconnection-editor/Chart.yaml +++ b/charts/ec2awskubedbcom-vpcpeeringconnection-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ec2.aws.kubedb.com","version":"v1alpha1","resource":"vpcpeeringconnections"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VPCPeeringConnection Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ec2awskubedbcom-vpcpeeringconnection-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/ec2awskubedbcom-vpcpeeringconnection-editor/README.md b/charts/ec2awskubedbcom-vpcpeeringconnection-editor/README.md index 38d840be3e..0bbc5f5792 100644 --- a/charts/ec2awskubedbcom-vpcpeeringconnection-editor/README.md +++ b/charts/ec2awskubedbcom-vpcpeeringconnection-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ec2awskubedbcom-vpcpeeringconnection-editor --version=v0.23.0 -$ helm upgrade -i ec2awskubedbcom-vpcpeeringconnection-editor appscode/ec2awskubedbcom-vpcpeeringconnection-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/ec2awskubedbcom-vpcpeeringconnection-editor --version=v0.24.0 +$ helm upgrade -i ec2awskubedbcom-vpcpeeringconnection-editor appscode/ec2awskubedbcom-vpcpeeringconnection-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VPCPeeringConnection Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `ec2awskubedbcom-vpcpeeringconnection-editor`: ```bash -$ helm upgrade -i ec2awskubedbcom-vpcpeeringconnection-editor appscode/ec2awskubedbcom-vpcpeeringconnection-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i ec2awskubedbcom-vpcpeeringconnection-editor appscode/ec2awskubedbcom-vpcpeeringconnection-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VPCPeeringConnection Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ec2awskubedbcom-vp Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-vpcpeeringconnection-editor appscode/ec2awskubedbcom-vpcpeeringconnection-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 +$ helm upgrade -i ec2awskubedbcom-vpcpeeringconnection-editor appscode/ec2awskubedbcom-vpcpeeringconnection-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ec2.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ec2awskubedbcom-vpcpeeringconnection-editor appscode/ec2awskubedbcom-vpcpeeringconnection-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i ec2awskubedbcom-vpcpeeringconnection-editor appscode/ec2awskubedbcom-vpcpeeringconnection-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/elasticacheawskubedbcom-cluster-editor/Chart.yaml b/charts/elasticacheawskubedbcom-cluster-editor/Chart.yaml index 9fe3adc4c5..e7cdfcc269 100644 --- a/charts/elasticacheawskubedbcom-cluster-editor/Chart.yaml +++ b/charts/elasticacheawskubedbcom-cluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticache.aws.kubedb.com","version":"v1alpha1","resource":"clusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Cluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticacheawskubedbcom-cluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/elasticacheawskubedbcom-cluster-editor/README.md b/charts/elasticacheawskubedbcom-cluster-editor/README.md index a43c42e2c4..f32a6e9069 100644 --- a/charts/elasticacheawskubedbcom-cluster-editor/README.md +++ b/charts/elasticacheawskubedbcom-cluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticacheawskubedbcom-cluster-editor --version=v0.23.0 -$ helm upgrade -i elasticacheawskubedbcom-cluster-editor appscode/elasticacheawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/elasticacheawskubedbcom-cluster-editor --version=v0.24.0 +$ helm upgrade -i elasticacheawskubedbcom-cluster-editor appscode/elasticacheawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cluster Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `elasticacheawskubedbcom-cluster-editor`: ```bash -$ helm upgrade -i elasticacheawskubedbcom-cluster-editor appscode/elasticacheawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i elasticacheawskubedbcom-cluster-editor appscode/elasticacheawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Cluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticacheawskube Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-cluster-editor appscode/elasticacheawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticacheawskubedbcom-cluster-editor appscode/elasticacheawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-cluster-editor appscode/elasticacheawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i elasticacheawskubedbcom-cluster-editor appscode/elasticacheawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/elasticacheawskubedbcom-parametergroup-editor/Chart.yaml b/charts/elasticacheawskubedbcom-parametergroup-editor/Chart.yaml index 4b6e07729e..1780a6debd 100644 --- a/charts/elasticacheawskubedbcom-parametergroup-editor/Chart.yaml +++ b/charts/elasticacheawskubedbcom-parametergroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticache.aws.kubedb.com","version":"v1alpha1","resource":"parametergroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ParameterGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticacheawskubedbcom-parametergroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/elasticacheawskubedbcom-parametergroup-editor/README.md b/charts/elasticacheawskubedbcom-parametergroup-editor/README.md index ec1ffc7981..ecb82791c9 100644 --- a/charts/elasticacheawskubedbcom-parametergroup-editor/README.md +++ b/charts/elasticacheawskubedbcom-parametergroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticacheawskubedbcom-parametergroup-editor --version=v0.23.0 -$ helm upgrade -i elasticacheawskubedbcom-parametergroup-editor appscode/elasticacheawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/elasticacheawskubedbcom-parametergroup-editor --version=v0.24.0 +$ helm upgrade -i elasticacheawskubedbcom-parametergroup-editor appscode/elasticacheawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ParameterGroup Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `elasticacheawskubedbcom-parametergroup-editor`: ```bash -$ helm upgrade -i elasticacheawskubedbcom-parametergroup-editor appscode/elasticacheawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i elasticacheawskubedbcom-parametergroup-editor appscode/elasticacheawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ParameterGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticacheawskube Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-parametergroup-editor appscode/elasticacheawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticacheawskubedbcom-parametergroup-editor appscode/elasticacheawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-parametergroup-editor appscode/elasticacheawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i elasticacheawskubedbcom-parametergroup-editor appscode/elasticacheawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/elasticacheawskubedbcom-replicationgroup-editor/Chart.yaml b/charts/elasticacheawskubedbcom-replicationgroup-editor/Chart.yaml index cf582c5366..1603b93e39 100644 --- a/charts/elasticacheawskubedbcom-replicationgroup-editor/Chart.yaml +++ b/charts/elasticacheawskubedbcom-replicationgroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticache.aws.kubedb.com","version":"v1alpha1","resource":"replicationgroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ReplicationGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticacheawskubedbcom-replicationgroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/elasticacheawskubedbcom-replicationgroup-editor/README.md b/charts/elasticacheawskubedbcom-replicationgroup-editor/README.md index afe76c3407..4f7b8447bd 100644 --- a/charts/elasticacheawskubedbcom-replicationgroup-editor/README.md +++ b/charts/elasticacheawskubedbcom-replicationgroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticacheawskubedbcom-replicationgroup-editor --version=v0.23.0 -$ helm upgrade -i elasticacheawskubedbcom-replicationgroup-editor appscode/elasticacheawskubedbcom-replicationgroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/elasticacheawskubedbcom-replicationgroup-editor --version=v0.24.0 +$ helm upgrade -i elasticacheawskubedbcom-replicationgroup-editor appscode/elasticacheawskubedbcom-replicationgroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ReplicationGroup Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `elasticacheawskubedbcom-replicationgroup-editor`: ```bash -$ helm upgrade -i elasticacheawskubedbcom-replicationgroup-editor appscode/elasticacheawskubedbcom-replicationgroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i elasticacheawskubedbcom-replicationgroup-editor appscode/elasticacheawskubedbcom-replicationgroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ReplicationGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticacheawskube Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-replicationgroup-editor appscode/elasticacheawskubedbcom-replicationgroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticacheawskubedbcom-replicationgroup-editor appscode/elasticacheawskubedbcom-replicationgroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-replicationgroup-editor appscode/elasticacheawskubedbcom-replicationgroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i elasticacheawskubedbcom-replicationgroup-editor appscode/elasticacheawskubedbcom-replicationgroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/elasticacheawskubedbcom-subnetgroup-editor/Chart.yaml b/charts/elasticacheawskubedbcom-subnetgroup-editor/Chart.yaml index ddc75cb66c..1ab88d3ad8 100644 --- a/charts/elasticacheawskubedbcom-subnetgroup-editor/Chart.yaml +++ b/charts/elasticacheawskubedbcom-subnetgroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticache.aws.kubedb.com","version":"v1alpha1","resource":"subnetgroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SubnetGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticacheawskubedbcom-subnetgroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/elasticacheawskubedbcom-subnetgroup-editor/README.md b/charts/elasticacheawskubedbcom-subnetgroup-editor/README.md index b2109b681b..12a850edc0 100644 --- a/charts/elasticacheawskubedbcom-subnetgroup-editor/README.md +++ b/charts/elasticacheawskubedbcom-subnetgroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticacheawskubedbcom-subnetgroup-editor --version=v0.23.0 -$ helm upgrade -i elasticacheawskubedbcom-subnetgroup-editor appscode/elasticacheawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/elasticacheawskubedbcom-subnetgroup-editor --version=v0.24.0 +$ helm upgrade -i elasticacheawskubedbcom-subnetgroup-editor appscode/elasticacheawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SubnetGroup Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `elasticacheawskubedbcom-subnetgroup-editor`: ```bash -$ helm upgrade -i elasticacheawskubedbcom-subnetgroup-editor appscode/elasticacheawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i elasticacheawskubedbcom-subnetgroup-editor appscode/elasticacheawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SubnetGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticacheawskube Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-subnetgroup-editor appscode/elasticacheawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticacheawskubedbcom-subnetgroup-editor appscode/elasticacheawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-subnetgroup-editor appscode/elasticacheawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i elasticacheawskubedbcom-subnetgroup-editor appscode/elasticacheawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/elasticacheawskubedbcom-user-editor/Chart.yaml b/charts/elasticacheawskubedbcom-user-editor/Chart.yaml index 6e9663d2e9..5099390554 100644 --- a/charts/elasticacheawskubedbcom-user-editor/Chart.yaml +++ b/charts/elasticacheawskubedbcom-user-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticache.aws.kubedb.com","version":"v1alpha1","resource":"users"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: User Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticacheawskubedbcom-user-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/elasticacheawskubedbcom-user-editor/README.md b/charts/elasticacheawskubedbcom-user-editor/README.md index 0205ff6a60..ae0c4d42a3 100644 --- a/charts/elasticacheawskubedbcom-user-editor/README.md +++ b/charts/elasticacheawskubedbcom-user-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticacheawskubedbcom-user-editor --version=v0.23.0 -$ helm upgrade -i elasticacheawskubedbcom-user-editor appscode/elasticacheawskubedbcom-user-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/elasticacheawskubedbcom-user-editor --version=v0.24.0 +$ helm upgrade -i elasticacheawskubedbcom-user-editor appscode/elasticacheawskubedbcom-user-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a User Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `elasticacheawskubedbcom-user-editor`: ```bash -$ helm upgrade -i elasticacheawskubedbcom-user-editor appscode/elasticacheawskubedbcom-user-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i elasticacheawskubedbcom-user-editor appscode/elasticacheawskubedbcom-user-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a User Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticacheawskube Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-user-editor appscode/elasticacheawskubedbcom-user-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticacheawskubedbcom-user-editor appscode/elasticacheawskubedbcom-user-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-user-editor appscode/elasticacheawskubedbcom-user-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i elasticacheawskubedbcom-user-editor appscode/elasticacheawskubedbcom-user-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/elasticacheawskubedbcom-usergroup-editor/Chart.yaml b/charts/elasticacheawskubedbcom-usergroup-editor/Chart.yaml index b01074dd18..aed12ae39b 100644 --- a/charts/elasticacheawskubedbcom-usergroup-editor/Chart.yaml +++ b/charts/elasticacheawskubedbcom-usergroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticache.aws.kubedb.com","version":"v1alpha1","resource":"usergroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: UserGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticacheawskubedbcom-usergroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/elasticacheawskubedbcom-usergroup-editor/README.md b/charts/elasticacheawskubedbcom-usergroup-editor/README.md index e6cfdb1d60..e5fa049000 100644 --- a/charts/elasticacheawskubedbcom-usergroup-editor/README.md +++ b/charts/elasticacheawskubedbcom-usergroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticacheawskubedbcom-usergroup-editor --version=v0.23.0 -$ helm upgrade -i elasticacheawskubedbcom-usergroup-editor appscode/elasticacheawskubedbcom-usergroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/elasticacheawskubedbcom-usergroup-editor --version=v0.24.0 +$ helm upgrade -i elasticacheawskubedbcom-usergroup-editor appscode/elasticacheawskubedbcom-usergroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a UserGroup Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `elasticacheawskubedbcom-usergroup-editor`: ```bash -$ helm upgrade -i elasticacheawskubedbcom-usergroup-editor appscode/elasticacheawskubedbcom-usergroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i elasticacheawskubedbcom-usergroup-editor appscode/elasticacheawskubedbcom-usergroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a UserGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticacheawskube Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-usergroup-editor appscode/elasticacheawskubedbcom-usergroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticacheawskubedbcom-usergroup-editor appscode/elasticacheawskubedbcom-usergroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=elasticache.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticacheawskubedbcom-usergroup-editor appscode/elasticacheawskubedbcom-usergroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i elasticacheawskubedbcom-usergroup-editor appscode/elasticacheawskubedbcom-usergroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/elasticsearchawskubedbcom-domain-editor/Chart.yaml b/charts/elasticsearchawskubedbcom-domain-editor/Chart.yaml index bc47e66733..9b94e87671 100644 --- a/charts/elasticsearchawskubedbcom-domain-editor/Chart.yaml +++ b/charts/elasticsearchawskubedbcom-domain-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticsearch.aws.kubedb.com","version":"v1alpha1","resource":"domains"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Domain Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticsearchawskubedbcom-domain-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/elasticsearchawskubedbcom-domain-editor/README.md b/charts/elasticsearchawskubedbcom-domain-editor/README.md index b4a54fb76f..5451ea0f6e 100644 --- a/charts/elasticsearchawskubedbcom-domain-editor/README.md +++ b/charts/elasticsearchawskubedbcom-domain-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticsearchawskubedbcom-domain-editor --version=v0.23.0 -$ helm upgrade -i elasticsearchawskubedbcom-domain-editor appscode/elasticsearchawskubedbcom-domain-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/elasticsearchawskubedbcom-domain-editor --version=v0.24.0 +$ helm upgrade -i elasticsearchawskubedbcom-domain-editor appscode/elasticsearchawskubedbcom-domain-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Domain Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `elasticsearchawskubedbcom-domain-editor`: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domain-editor appscode/elasticsearchawskubedbcom-domain-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i elasticsearchawskubedbcom-domain-editor appscode/elasticsearchawskubedbcom-domain-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Domain Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticsearchawsku Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domain-editor appscode/elasticsearchawskubedbcom-domain-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=elasticsearch.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticsearchawskubedbcom-domain-editor appscode/elasticsearchawskubedbcom-domain-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=elasticsearch.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domain-editor appscode/elasticsearchawskubedbcom-domain-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i elasticsearchawskubedbcom-domain-editor appscode/elasticsearchawskubedbcom-domain-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/elasticsearchawskubedbcom-domainpolicy-editor/Chart.yaml b/charts/elasticsearchawskubedbcom-domainpolicy-editor/Chart.yaml index 065dbdce2f..a7ba28d2b9 100644 --- a/charts/elasticsearchawskubedbcom-domainpolicy-editor/Chart.yaml +++ b/charts/elasticsearchawskubedbcom-domainpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticsearch.aws.kubedb.com","version":"v1alpha1","resource":"domainpolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: DomainPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticsearchawskubedbcom-domainpolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/elasticsearchawskubedbcom-domainpolicy-editor/README.md b/charts/elasticsearchawskubedbcom-domainpolicy-editor/README.md index ef0a78f846..970d6632fc 100644 --- a/charts/elasticsearchawskubedbcom-domainpolicy-editor/README.md +++ b/charts/elasticsearchawskubedbcom-domainpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticsearchawskubedbcom-domainpolicy-editor --version=v0.23.0 -$ helm upgrade -i elasticsearchawskubedbcom-domainpolicy-editor appscode/elasticsearchawskubedbcom-domainpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/elasticsearchawskubedbcom-domainpolicy-editor --version=v0.24.0 +$ helm upgrade -i elasticsearchawskubedbcom-domainpolicy-editor appscode/elasticsearchawskubedbcom-domainpolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DomainPolicy Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `elasticsearchawskubedbcom-domainpolicy-editor`: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domainpolicy-editor appscode/elasticsearchawskubedbcom-domainpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i elasticsearchawskubedbcom-domainpolicy-editor appscode/elasticsearchawskubedbcom-domainpolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a DomainPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticsearchawsku Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domainpolicy-editor appscode/elasticsearchawskubedbcom-domainpolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=elasticsearch.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticsearchawskubedbcom-domainpolicy-editor appscode/elasticsearchawskubedbcom-domainpolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=elasticsearch.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domainpolicy-editor appscode/elasticsearchawskubedbcom-domainpolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i elasticsearchawskubedbcom-domainpolicy-editor appscode/elasticsearchawskubedbcom-domainpolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/elasticsearchawskubedbcom-domainsamloptions-editor/Chart.yaml b/charts/elasticsearchawskubedbcom-domainsamloptions-editor/Chart.yaml index c0cca44959..d71ff27acc 100644 --- a/charts/elasticsearchawskubedbcom-domainsamloptions-editor/Chart.yaml +++ b/charts/elasticsearchawskubedbcom-domainsamloptions-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticsearch.aws.kubedb.com","version":"v1alpha1","resource":"domainsamloptions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: DomainSAMLOptions Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticsearchawskubedbcom-domainsamloptions-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/elasticsearchawskubedbcom-domainsamloptions-editor/README.md b/charts/elasticsearchawskubedbcom-domainsamloptions-editor/README.md index a85dfb6f35..1b02cd868d 100644 --- a/charts/elasticsearchawskubedbcom-domainsamloptions-editor/README.md +++ b/charts/elasticsearchawskubedbcom-domainsamloptions-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticsearchawskubedbcom-domainsamloptions-editor --version=v0.23.0 -$ helm upgrade -i elasticsearchawskubedbcom-domainsamloptions-editor appscode/elasticsearchawskubedbcom-domainsamloptions-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/elasticsearchawskubedbcom-domainsamloptions-editor --version=v0.24.0 +$ helm upgrade -i elasticsearchawskubedbcom-domainsamloptions-editor appscode/elasticsearchawskubedbcom-domainsamloptions-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DomainSAMLOptions Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `elasticsearchawskubedbcom-domainsamloptions-editor`: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domainsamloptions-editor appscode/elasticsearchawskubedbcom-domainsamloptions-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i elasticsearchawskubedbcom-domainsamloptions-editor appscode/elasticsearchawskubedbcom-domainsamloptions-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a DomainSAMLOptions Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticsearchawsku Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domainsamloptions-editor appscode/elasticsearchawskubedbcom-domainsamloptions-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=elasticsearch.aws.kubedb.com/v1alpha1 +$ helm upgrade -i elasticsearchawskubedbcom-domainsamloptions-editor appscode/elasticsearchawskubedbcom-domainsamloptions-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=elasticsearch.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticsearchawskubedbcom-domainsamloptions-editor appscode/elasticsearchawskubedbcom-domainsamloptions-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i elasticsearchawskubedbcom-domainsamloptions-editor appscode/elasticsearchawskubedbcom-domainsamloptions-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/elasticsearchkubedbcom-elasticsearchdashboard-editor/Chart.yaml b/charts/elasticsearchkubedbcom-elasticsearchdashboard-editor/Chart.yaml index 5633af88aa..3db8d394b6 100644 --- a/charts/elasticsearchkubedbcom-elasticsearchdashboard-editor/Chart.yaml +++ b/charts/elasticsearchkubedbcom-elasticsearchdashboard-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"elasticsearch.kubedb.com","version":"v1alpha1","resource":"elasticsearchdashboards"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ElasticsearchDashboard Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: elasticsearchkubedbcom-elasticsearchdashboard-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/elasticsearchkubedbcom-elasticsearchdashboard-editor/README.md b/charts/elasticsearchkubedbcom-elasticsearchdashboard-editor/README.md index 667afe4cb1..c20011eb48 100644 --- a/charts/elasticsearchkubedbcom-elasticsearchdashboard-editor/README.md +++ b/charts/elasticsearchkubedbcom-elasticsearchdashboard-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor --version=v0.23.0 -$ helm upgrade -i elasticsearchkubedbcom-elasticsearchdashboard-editor appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor --version=v0.24.0 +$ helm upgrade -i elasticsearchkubedbcom-elasticsearchdashboard-editor appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchDashboard Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `elasticsearchkubedbcom-elasticsearchdashboard-editor`: ```bash -$ helm upgrade -i elasticsearchkubedbcom-elasticsearchdashboard-editor appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i elasticsearchkubedbcom-elasticsearchdashboard-editor appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ElasticsearchDashboard Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `elasticsearchkubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i elasticsearchkubedbcom-elasticsearchdashboard-editor appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=elasticsearch.kubedb.com/v1alpha1 +$ helm upgrade -i elasticsearchkubedbcom-elasticsearchdashboard-editor appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=elasticsearch.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i elasticsearchkubedbcom-elasticsearchdashboard-editor appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i elasticsearchkubedbcom-elasticsearchdashboard-editor appscode/elasticsearchkubedbcom-elasticsearchdashboard-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-awsrole-editor/Chart.yaml b/charts/enginekubevaultcom-awsrole-editor/Chart.yaml index feed60ff9e..fadd6735e7 100644 --- a/charts/enginekubevaultcom-awsrole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-awsrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"awsroles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AWSRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-awsrole-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/enginekubevaultcom-awsrole-editor/README.md b/charts/enginekubevaultcom-awsrole-editor/README.md index 6b03382b25..15c84f358f 100644 --- a/charts/enginekubevaultcom-awsrole-editor/README.md +++ b/charts/enginekubevaultcom-awsrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-awsrole-editor --version=v0.23.0 -$ helm upgrade -i enginekubevaultcom-awsrole-editor appscode/enginekubevaultcom-awsrole-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/enginekubevaultcom-awsrole-editor --version=v0.24.0 +$ helm upgrade -i enginekubevaultcom-awsrole-editor appscode/enginekubevaultcom-awsrole-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSRole Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `enginekubevaultcom-awsrole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-awsrole-editor appscode/enginekubevaultcom-awsrole-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i enginekubevaultcom-awsrole-editor appscode/enginekubevaultcom-awsrole-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AWSRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-awsrole-editor appscode/enginekubevaultcom-awsrole-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-awsrole-editor appscode/enginekubevaultcom-awsrole-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-awsrole-editor appscode/enginekubevaultcom-awsrole-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-awsrole-editor appscode/enginekubevaultcom-awsrole-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-azurerole-editor/Chart.yaml b/charts/enginekubevaultcom-azurerole-editor/Chart.yaml index 4e8a1a568a..2f873251cf 100644 --- a/charts/enginekubevaultcom-azurerole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-azurerole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"azureroles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-azurerole-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/enginekubevaultcom-azurerole-editor/README.md b/charts/enginekubevaultcom-azurerole-editor/README.md index 14a51d8c7d..5d9c648f0b 100644 --- a/charts/enginekubevaultcom-azurerole-editor/README.md +++ b/charts/enginekubevaultcom-azurerole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-azurerole-editor --version=v0.23.0 -$ helm upgrade -i enginekubevaultcom-azurerole-editor appscode/enginekubevaultcom-azurerole-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/enginekubevaultcom-azurerole-editor --version=v0.24.0 +$ helm upgrade -i enginekubevaultcom-azurerole-editor appscode/enginekubevaultcom-azurerole-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureRole Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `enginekubevaultcom-azurerole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-azurerole-editor appscode/enginekubevaultcom-azurerole-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i enginekubevaultcom-azurerole-editor appscode/enginekubevaultcom-azurerole-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-azurerole-editor appscode/enginekubevaultcom-azurerole-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-azurerole-editor appscode/enginekubevaultcom-azurerole-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-azurerole-editor appscode/enginekubevaultcom-azurerole-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-azurerole-editor appscode/enginekubevaultcom-azurerole-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-elasticsearchrole-editor/Chart.yaml b/charts/enginekubevaultcom-elasticsearchrole-editor/Chart.yaml index 50137e23e4..7d14e3b641 100644 --- a/charts/enginekubevaultcom-elasticsearchrole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-elasticsearchrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"elasticsearchroles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ElasticsearchRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-elasticsearchrole-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/enginekubevaultcom-elasticsearchrole-editor/README.md b/charts/enginekubevaultcom-elasticsearchrole-editor/README.md index 00f64aa85c..e7ac95b0f2 100644 --- a/charts/enginekubevaultcom-elasticsearchrole-editor/README.md +++ b/charts/enginekubevaultcom-elasticsearchrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-elasticsearchrole-editor --version=v0.23.0 -$ helm upgrade -i enginekubevaultcom-elasticsearchrole-editor appscode/enginekubevaultcom-elasticsearchrole-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/enginekubevaultcom-elasticsearchrole-editor --version=v0.24.0 +$ helm upgrade -i enginekubevaultcom-elasticsearchrole-editor appscode/enginekubevaultcom-elasticsearchrole-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchRole Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `enginekubevaultcom-elasticsearchrole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-elasticsearchrole-editor appscode/enginekubevaultcom-elasticsearchrole-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i enginekubevaultcom-elasticsearchrole-editor appscode/enginekubevaultcom-elasticsearchrole-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ElasticsearchRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-elasticsearchrole-editor appscode/enginekubevaultcom-elasticsearchrole-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-elasticsearchrole-editor appscode/enginekubevaultcom-elasticsearchrole-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-elasticsearchrole-editor appscode/enginekubevaultcom-elasticsearchrole-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-elasticsearchrole-editor appscode/enginekubevaultcom-elasticsearchrole-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-gcprole-editor/Chart.yaml b/charts/enginekubevaultcom-gcprole-editor/Chart.yaml index 59c8c23f15..587d26aaa7 100644 --- a/charts/enginekubevaultcom-gcprole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-gcprole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"gcproles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GCPRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-gcprole-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/enginekubevaultcom-gcprole-editor/README.md b/charts/enginekubevaultcom-gcprole-editor/README.md index 9b23592756..5abb0b2c18 100644 --- a/charts/enginekubevaultcom-gcprole-editor/README.md +++ b/charts/enginekubevaultcom-gcprole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-gcprole-editor --version=v0.23.0 -$ helm upgrade -i enginekubevaultcom-gcprole-editor appscode/enginekubevaultcom-gcprole-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/enginekubevaultcom-gcprole-editor --version=v0.24.0 +$ helm upgrade -i enginekubevaultcom-gcprole-editor appscode/enginekubevaultcom-gcprole-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GCPRole Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `enginekubevaultcom-gcprole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-gcprole-editor appscode/enginekubevaultcom-gcprole-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i enginekubevaultcom-gcprole-editor appscode/enginekubevaultcom-gcprole-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GCPRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-gcprole-editor appscode/enginekubevaultcom-gcprole-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-gcprole-editor appscode/enginekubevaultcom-gcprole-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-gcprole-editor appscode/enginekubevaultcom-gcprole-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-gcprole-editor appscode/enginekubevaultcom-gcprole-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-mariadbrole-editor/Chart.yaml b/charts/enginekubevaultcom-mariadbrole-editor/Chart.yaml index 98c99def40..c917f8dac9 100644 --- a/charts/enginekubevaultcom-mariadbrole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-mariadbrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"mariadbroles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MariaDBRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-mariadbrole-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/enginekubevaultcom-mariadbrole-editor/README.md b/charts/enginekubevaultcom-mariadbrole-editor/README.md index 92dc0aa6a3..8fdaecabcc 100644 --- a/charts/enginekubevaultcom-mariadbrole-editor/README.md +++ b/charts/enginekubevaultcom-mariadbrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-mariadbrole-editor --version=v0.23.0 -$ helm upgrade -i enginekubevaultcom-mariadbrole-editor appscode/enginekubevaultcom-mariadbrole-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/enginekubevaultcom-mariadbrole-editor --version=v0.24.0 +$ helm upgrade -i enginekubevaultcom-mariadbrole-editor appscode/enginekubevaultcom-mariadbrole-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBRole Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `enginekubevaultcom-mariadbrole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-mariadbrole-editor appscode/enginekubevaultcom-mariadbrole-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i enginekubevaultcom-mariadbrole-editor appscode/enginekubevaultcom-mariadbrole-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MariaDBRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-mariadbrole-editor appscode/enginekubevaultcom-mariadbrole-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-mariadbrole-editor appscode/enginekubevaultcom-mariadbrole-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-mariadbrole-editor appscode/enginekubevaultcom-mariadbrole-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-mariadbrole-editor appscode/enginekubevaultcom-mariadbrole-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-mongodbrole-editor/Chart.yaml b/charts/enginekubevaultcom-mongodbrole-editor/Chart.yaml index f733331107..c20056ad35 100644 --- a/charts/enginekubevaultcom-mongodbrole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-mongodbrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"mongodbroles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MongoDBRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-mongodbrole-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/enginekubevaultcom-mongodbrole-editor/README.md b/charts/enginekubevaultcom-mongodbrole-editor/README.md index bd9a11dc75..92149d7c56 100644 --- a/charts/enginekubevaultcom-mongodbrole-editor/README.md +++ b/charts/enginekubevaultcom-mongodbrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-mongodbrole-editor --version=v0.23.0 -$ helm upgrade -i enginekubevaultcom-mongodbrole-editor appscode/enginekubevaultcom-mongodbrole-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/enginekubevaultcom-mongodbrole-editor --version=v0.24.0 +$ helm upgrade -i enginekubevaultcom-mongodbrole-editor appscode/enginekubevaultcom-mongodbrole-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBRole Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `enginekubevaultcom-mongodbrole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-mongodbrole-editor appscode/enginekubevaultcom-mongodbrole-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i enginekubevaultcom-mongodbrole-editor appscode/enginekubevaultcom-mongodbrole-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MongoDBRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-mongodbrole-editor appscode/enginekubevaultcom-mongodbrole-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-mongodbrole-editor appscode/enginekubevaultcom-mongodbrole-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-mongodbrole-editor appscode/enginekubevaultcom-mongodbrole-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-mongodbrole-editor appscode/enginekubevaultcom-mongodbrole-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-mysqlrole-editor/Chart.yaml b/charts/enginekubevaultcom-mysqlrole-editor/Chart.yaml index 2c9e4ea5a4..b96d66a923 100644 --- a/charts/enginekubevaultcom-mysqlrole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-mysqlrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"mysqlroles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MySQLRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-mysqlrole-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/enginekubevaultcom-mysqlrole-editor/README.md b/charts/enginekubevaultcom-mysqlrole-editor/README.md index effa592209..0ec7a24a27 100644 --- a/charts/enginekubevaultcom-mysqlrole-editor/README.md +++ b/charts/enginekubevaultcom-mysqlrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-mysqlrole-editor --version=v0.23.0 -$ helm upgrade -i enginekubevaultcom-mysqlrole-editor appscode/enginekubevaultcom-mysqlrole-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/enginekubevaultcom-mysqlrole-editor --version=v0.24.0 +$ helm upgrade -i enginekubevaultcom-mysqlrole-editor appscode/enginekubevaultcom-mysqlrole-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLRole Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `enginekubevaultcom-mysqlrole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-mysqlrole-editor appscode/enginekubevaultcom-mysqlrole-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i enginekubevaultcom-mysqlrole-editor appscode/enginekubevaultcom-mysqlrole-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MySQLRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-mysqlrole-editor appscode/enginekubevaultcom-mysqlrole-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-mysqlrole-editor appscode/enginekubevaultcom-mysqlrole-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-mysqlrole-editor appscode/enginekubevaultcom-mysqlrole-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-mysqlrole-editor appscode/enginekubevaultcom-mysqlrole-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-pkirole-editor/Chart.yaml b/charts/enginekubevaultcom-pkirole-editor/Chart.yaml index cd54f9ed86..91bec17812 100644 --- a/charts/enginekubevaultcom-pkirole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-pkirole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"pkiroles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PKIRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-pkirole-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/enginekubevaultcom-pkirole-editor/README.md b/charts/enginekubevaultcom-pkirole-editor/README.md index 7d7dc6f13d..efc4e59bf4 100644 --- a/charts/enginekubevaultcom-pkirole-editor/README.md +++ b/charts/enginekubevaultcom-pkirole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-pkirole-editor --version=v0.23.0 -$ helm upgrade -i enginekubevaultcom-pkirole-editor appscode/enginekubevaultcom-pkirole-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/enginekubevaultcom-pkirole-editor --version=v0.24.0 +$ helm upgrade -i enginekubevaultcom-pkirole-editor appscode/enginekubevaultcom-pkirole-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PKIRole Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `enginekubevaultcom-pkirole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-pkirole-editor appscode/enginekubevaultcom-pkirole-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i enginekubevaultcom-pkirole-editor appscode/enginekubevaultcom-pkirole-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PKIRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-pkirole-editor appscode/enginekubevaultcom-pkirole-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-pkirole-editor appscode/enginekubevaultcom-pkirole-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-pkirole-editor appscode/enginekubevaultcom-pkirole-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-pkirole-editor appscode/enginekubevaultcom-pkirole-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-postgresrole-editor/Chart.yaml b/charts/enginekubevaultcom-postgresrole-editor/Chart.yaml index 10d15d47de..1d5835017e 100644 --- a/charts/enginekubevaultcom-postgresrole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-postgresrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"postgresroles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PostgresRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-postgresrole-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/enginekubevaultcom-postgresrole-editor/README.md b/charts/enginekubevaultcom-postgresrole-editor/README.md index df8bb68697..20d9eb8d29 100644 --- a/charts/enginekubevaultcom-postgresrole-editor/README.md +++ b/charts/enginekubevaultcom-postgresrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-postgresrole-editor --version=v0.23.0 -$ helm upgrade -i enginekubevaultcom-postgresrole-editor appscode/enginekubevaultcom-postgresrole-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/enginekubevaultcom-postgresrole-editor --version=v0.24.0 +$ helm upgrade -i enginekubevaultcom-postgresrole-editor appscode/enginekubevaultcom-postgresrole-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresRole Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `enginekubevaultcom-postgresrole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-postgresrole-editor appscode/enginekubevaultcom-postgresrole-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i enginekubevaultcom-postgresrole-editor appscode/enginekubevaultcom-postgresrole-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PostgresRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-postgresrole-editor appscode/enginekubevaultcom-postgresrole-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-postgresrole-editor appscode/enginekubevaultcom-postgresrole-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-postgresrole-editor appscode/enginekubevaultcom-postgresrole-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-postgresrole-editor appscode/enginekubevaultcom-postgresrole-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-redisrole-editor/Chart.yaml b/charts/enginekubevaultcom-redisrole-editor/Chart.yaml index 7d0cc53f6d..00dcb667ee 100644 --- a/charts/enginekubevaultcom-redisrole-editor/Chart.yaml +++ b/charts/enginekubevaultcom-redisrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"redisroles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-redisrole-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/enginekubevaultcom-redisrole-editor/README.md b/charts/enginekubevaultcom-redisrole-editor/README.md index 3278daec37..6c5250cbe4 100644 --- a/charts/enginekubevaultcom-redisrole-editor/README.md +++ b/charts/enginekubevaultcom-redisrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-redisrole-editor --version=v0.23.0 -$ helm upgrade -i enginekubevaultcom-redisrole-editor appscode/enginekubevaultcom-redisrole-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/enginekubevaultcom-redisrole-editor --version=v0.24.0 +$ helm upgrade -i enginekubevaultcom-redisrole-editor appscode/enginekubevaultcom-redisrole-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisRole Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `enginekubevaultcom-redisrole-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-redisrole-editor appscode/enginekubevaultcom-redisrole-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i enginekubevaultcom-redisrole-editor appscode/enginekubevaultcom-redisrole-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-redisrole-editor appscode/enginekubevaultcom-redisrole-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-redisrole-editor appscode/enginekubevaultcom-redisrole-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-redisrole-editor appscode/enginekubevaultcom-redisrole-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-redisrole-editor appscode/enginekubevaultcom-redisrole-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-secretaccessrequest-editor/Chart.yaml b/charts/enginekubevaultcom-secretaccessrequest-editor/Chart.yaml index 91973f7367..3c6dd8e7ea 100644 --- a/charts/enginekubevaultcom-secretaccessrequest-editor/Chart.yaml +++ b/charts/enginekubevaultcom-secretaccessrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"secretaccessrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SecretAccessRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-secretaccessrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/enginekubevaultcom-secretaccessrequest-editor/README.md b/charts/enginekubevaultcom-secretaccessrequest-editor/README.md index e14f517f04..ecdb4b9d67 100644 --- a/charts/enginekubevaultcom-secretaccessrequest-editor/README.md +++ b/charts/enginekubevaultcom-secretaccessrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-secretaccessrequest-editor --version=v0.23.0 -$ helm upgrade -i enginekubevaultcom-secretaccessrequest-editor appscode/enginekubevaultcom-secretaccessrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/enginekubevaultcom-secretaccessrequest-editor --version=v0.24.0 +$ helm upgrade -i enginekubevaultcom-secretaccessrequest-editor appscode/enginekubevaultcom-secretaccessrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecretAccessRequest Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `enginekubevaultcom-secretaccessrequest-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-secretaccessrequest-editor appscode/enginekubevaultcom-secretaccessrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i enginekubevaultcom-secretaccessrequest-editor appscode/enginekubevaultcom-secretaccessrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SecretAccessRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-secretaccessrequest-editor appscode/enginekubevaultcom-secretaccessrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-secretaccessrequest-editor appscode/enginekubevaultcom-secretaccessrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-secretaccessrequest-editor appscode/enginekubevaultcom-secretaccessrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-secretaccessrequest-editor appscode/enginekubevaultcom-secretaccessrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-secretengine-editor/Chart.yaml b/charts/enginekubevaultcom-secretengine-editor/Chart.yaml index cb7b9a254d..d08a86defa 100644 --- a/charts/enginekubevaultcom-secretengine-editor/Chart.yaml +++ b/charts/enginekubevaultcom-secretengine-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"secretengines"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SecretEngine Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-secretengine-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/enginekubevaultcom-secretengine-editor/README.md b/charts/enginekubevaultcom-secretengine-editor/README.md index 2a9827dee7..09a0600b89 100644 --- a/charts/enginekubevaultcom-secretengine-editor/README.md +++ b/charts/enginekubevaultcom-secretengine-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-secretengine-editor --version=v0.23.0 -$ helm upgrade -i enginekubevaultcom-secretengine-editor appscode/enginekubevaultcom-secretengine-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/enginekubevaultcom-secretengine-editor --version=v0.24.0 +$ helm upgrade -i enginekubevaultcom-secretengine-editor appscode/enginekubevaultcom-secretengine-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecretEngine Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `enginekubevaultcom-secretengine-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-secretengine-editor appscode/enginekubevaultcom-secretengine-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i enginekubevaultcom-secretengine-editor appscode/enginekubevaultcom-secretengine-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SecretEngine Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-secretengine-editor appscode/enginekubevaultcom-secretengine-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-secretengine-editor appscode/enginekubevaultcom-secretengine-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-secretengine-editor appscode/enginekubevaultcom-secretengine-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-secretengine-editor appscode/enginekubevaultcom-secretengine-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/enginekubevaultcom-secretrolebinding-editor/Chart.yaml b/charts/enginekubevaultcom-secretrolebinding-editor/Chart.yaml index 168f8dbd98..1384387e1b 100644 --- a/charts/enginekubevaultcom-secretrolebinding-editor/Chart.yaml +++ b/charts/enginekubevaultcom-secretrolebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"engine.kubevault.com","version":"v1alpha1","resource":"secretrolebindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SecretRoleBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: enginekubevaultcom-secretrolebinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/enginekubevaultcom-secretrolebinding-editor/README.md b/charts/enginekubevaultcom-secretrolebinding-editor/README.md index 4a6e46dd7d..aa9509247c 100644 --- a/charts/enginekubevaultcom-secretrolebinding-editor/README.md +++ b/charts/enginekubevaultcom-secretrolebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/enginekubevaultcom-secretrolebinding-editor --version=v0.23.0 -$ helm upgrade -i enginekubevaultcom-secretrolebinding-editor appscode/enginekubevaultcom-secretrolebinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/enginekubevaultcom-secretrolebinding-editor --version=v0.24.0 +$ helm upgrade -i enginekubevaultcom-secretrolebinding-editor appscode/enginekubevaultcom-secretrolebinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecretRoleBinding Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `enginekubevaultcom-secretrolebinding-editor`: ```bash -$ helm upgrade -i enginekubevaultcom-secretrolebinding-editor appscode/enginekubevaultcom-secretrolebinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i enginekubevaultcom-secretrolebinding-editor appscode/enginekubevaultcom-secretrolebinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SecretRoleBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `enginekubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i enginekubevaultcom-secretrolebinding-editor appscode/enginekubevaultcom-secretrolebinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=engine.kubevault.com/v1alpha1 +$ helm upgrade -i enginekubevaultcom-secretrolebinding-editor appscode/enginekubevaultcom-secretrolebinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=engine.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i enginekubevaultcom-secretrolebinding-editor appscode/enginekubevaultcom-secretrolebinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i enginekubevaultcom-secretrolebinding-editor appscode/enginekubevaultcom-secretrolebinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/eventsk8sio-event-editor/Chart.yaml b/charts/eventsk8sio-event-editor/Chart.yaml index 29c8e62415..5b1b4af217 100644 --- a/charts/eventsk8sio-event-editor/Chart.yaml +++ b/charts/eventsk8sio-event-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"events.k8s.io","version":"v1","resource":"events"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Event Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: eventsk8sio-event-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/eventsk8sio-event-editor/README.md b/charts/eventsk8sio-event-editor/README.md index 4422d4e244..dc8eae9e79 100644 --- a/charts/eventsk8sio-event-editor/README.md +++ b/charts/eventsk8sio-event-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/eventsk8sio-event-editor --version=v0.23.0 -$ helm upgrade -i eventsk8sio-event-editor appscode/eventsk8sio-event-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/eventsk8sio-event-editor --version=v0.24.0 +$ helm upgrade -i eventsk8sio-event-editor appscode/eventsk8sio-event-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Event Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `eventsk8sio-event-editor`: ```bash -$ helm upgrade -i eventsk8sio-event-editor appscode/eventsk8sio-event-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i eventsk8sio-event-editor appscode/eventsk8sio-event-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Event Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `eventsk8sio-event- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i eventsk8sio-event-editor appscode/eventsk8sio-event-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=events.k8s.io/v1 +$ helm upgrade -i eventsk8sio-event-editor appscode/eventsk8sio-event-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=events.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i eventsk8sio-event-editor appscode/eventsk8sio-event-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i eventsk8sio-event-editor appscode/eventsk8sio-event-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/expansiongatekeepersh-expansiontemplate-editor/Chart.yaml b/charts/expansiongatekeepersh-expansiontemplate-editor/Chart.yaml index 3020af4ba6..320cda4095 100644 --- a/charts/expansiongatekeepersh-expansiontemplate-editor/Chart.yaml +++ b/charts/expansiongatekeepersh-expansiontemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"expansion.gatekeeper.sh","version":"v1alpha1","resource":"expansiontemplate"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ExpansionTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: expansiongatekeepersh-expansiontemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/expansiongatekeepersh-expansiontemplate-editor/README.md b/charts/expansiongatekeepersh-expansiontemplate-editor/README.md index 6b52d0cc6f..3abc34d38b 100644 --- a/charts/expansiongatekeepersh-expansiontemplate-editor/README.md +++ b/charts/expansiongatekeepersh-expansiontemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/expansiongatekeepersh-expansiontemplate-editor --version=v0.23.0 -$ helm upgrade -i expansiongatekeepersh-expansiontemplate-editor appscode/expansiongatekeepersh-expansiontemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/expansiongatekeepersh-expansiontemplate-editor --version=v0.24.0 +$ helm upgrade -i expansiongatekeepersh-expansiontemplate-editor appscode/expansiongatekeepersh-expansiontemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ExpansionTemplate Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `expansiongatekeepersh-expansiontemplate-editor`: ```bash -$ helm upgrade -i expansiongatekeepersh-expansiontemplate-editor appscode/expansiongatekeepersh-expansiontemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i expansiongatekeepersh-expansiontemplate-editor appscode/expansiongatekeepersh-expansiontemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ExpansionTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `expansiongatekeepe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i expansiongatekeepersh-expansiontemplate-editor appscode/expansiongatekeepersh-expansiontemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=expansion.gatekeeper.sh/v1alpha1 +$ helm upgrade -i expansiongatekeepersh-expansiontemplate-editor appscode/expansiongatekeepersh-expansiontemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=expansion.gatekeeper.sh/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i expansiongatekeepersh-expansiontemplate-editor appscode/expansiongatekeepersh-expansiontemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i expansiongatekeepersh-expansiontemplate-editor appscode/expansiongatekeepersh-expansiontemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/extensions-daemonset-editor/Chart.yaml b/charts/extensions-daemonset-editor/Chart.yaml index 1919fe6f0b..be64d22fb8 100644 --- a/charts/extensions-daemonset-editor/Chart.yaml +++ b/charts/extensions-daemonset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"extensions","version":"v1beta1","resource":"daemonsets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: DaemonSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: extensions-daemonset-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/extensions-daemonset-editor/README.md b/charts/extensions-daemonset-editor/README.md index ef9a0e10ec..678126c4db 100644 --- a/charts/extensions-daemonset-editor/README.md +++ b/charts/extensions-daemonset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/extensions-daemonset-editor --version=v0.23.0 -$ helm upgrade -i extensions-daemonset-editor appscode/extensions-daemonset-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/extensions-daemonset-editor --version=v0.24.0 +$ helm upgrade -i extensions-daemonset-editor appscode/extensions-daemonset-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DaemonSet Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `extensions-daemonset-editor`: ```bash -$ helm upgrade -i extensions-daemonset-editor appscode/extensions-daemonset-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i extensions-daemonset-editor appscode/extensions-daemonset-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a DaemonSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `extensions-daemons Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i extensions-daemonset-editor appscode/extensions-daemonset-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=extensions/v1beta1 +$ helm upgrade -i extensions-daemonset-editor appscode/extensions-daemonset-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=extensions/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i extensions-daemonset-editor appscode/extensions-daemonset-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i extensions-daemonset-editor appscode/extensions-daemonset-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/extensions-deployment-editor/Chart.yaml b/charts/extensions-deployment-editor/Chart.yaml index 7f01b35e10..32377c9d5d 100644 --- a/charts/extensions-deployment-editor/Chart.yaml +++ b/charts/extensions-deployment-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"extensions","version":"v1beta1","resource":"deployments"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Deployment Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: extensions-deployment-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/extensions-deployment-editor/README.md b/charts/extensions-deployment-editor/README.md index 3ad59e4d39..c9f35f9e6b 100644 --- a/charts/extensions-deployment-editor/README.md +++ b/charts/extensions-deployment-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/extensions-deployment-editor --version=v0.23.0 -$ helm upgrade -i extensions-deployment-editor appscode/extensions-deployment-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/extensions-deployment-editor --version=v0.24.0 +$ helm upgrade -i extensions-deployment-editor appscode/extensions-deployment-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Deployment Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `extensions-deployment-editor`: ```bash -$ helm upgrade -i extensions-deployment-editor appscode/extensions-deployment-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i extensions-deployment-editor appscode/extensions-deployment-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Deployment Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `extensions-deploym Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i extensions-deployment-editor appscode/extensions-deployment-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=extensions/v1beta1 +$ helm upgrade -i extensions-deployment-editor appscode/extensions-deployment-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=extensions/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i extensions-deployment-editor appscode/extensions-deployment-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i extensions-deployment-editor appscode/extensions-deployment-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/extensions-ingress-editor/Chart.yaml b/charts/extensions-ingress-editor/Chart.yaml index df4018e842..4dc77d1cf8 100644 --- a/charts/extensions-ingress-editor/Chart.yaml +++ b/charts/extensions-ingress-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"extensions","version":"v1beta1","resource":"ingresses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Ingress Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: extensions-ingress-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/extensions-ingress-editor/README.md b/charts/extensions-ingress-editor/README.md index 3fad71664f..e17dc75350 100644 --- a/charts/extensions-ingress-editor/README.md +++ b/charts/extensions-ingress-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/extensions-ingress-editor --version=v0.23.0 -$ helm upgrade -i extensions-ingress-editor appscode/extensions-ingress-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/extensions-ingress-editor --version=v0.24.0 +$ helm upgrade -i extensions-ingress-editor appscode/extensions-ingress-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Ingress Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `extensions-ingress-editor`: ```bash -$ helm upgrade -i extensions-ingress-editor appscode/extensions-ingress-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i extensions-ingress-editor appscode/extensions-ingress-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Ingress Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `extensions-ingress Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i extensions-ingress-editor appscode/extensions-ingress-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=extensions/v1beta1 +$ helm upgrade -i extensions-ingress-editor appscode/extensions-ingress-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=extensions/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i extensions-ingress-editor appscode/extensions-ingress-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i extensions-ingress-editor appscode/extensions-ingress-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/extensions-networkpolicy-editor/Chart.yaml b/charts/extensions-networkpolicy-editor/Chart.yaml index a54fd02d6f..dbed8735e4 100644 --- a/charts/extensions-networkpolicy-editor/Chart.yaml +++ b/charts/extensions-networkpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"extensions","version":"v1beta1","resource":"networkpolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: NetworkPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: extensions-networkpolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/extensions-networkpolicy-editor/README.md b/charts/extensions-networkpolicy-editor/README.md index f7a4a90520..58e96f28c6 100644 --- a/charts/extensions-networkpolicy-editor/README.md +++ b/charts/extensions-networkpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/extensions-networkpolicy-editor --version=v0.23.0 -$ helm upgrade -i extensions-networkpolicy-editor appscode/extensions-networkpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/extensions-networkpolicy-editor --version=v0.24.0 +$ helm upgrade -i extensions-networkpolicy-editor appscode/extensions-networkpolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a NetworkPolicy Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `extensions-networkpolicy-editor`: ```bash -$ helm upgrade -i extensions-networkpolicy-editor appscode/extensions-networkpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i extensions-networkpolicy-editor appscode/extensions-networkpolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a NetworkPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `extensions-network Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i extensions-networkpolicy-editor appscode/extensions-networkpolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=extensions/v1beta1 +$ helm upgrade -i extensions-networkpolicy-editor appscode/extensions-networkpolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=extensions/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i extensions-networkpolicy-editor appscode/extensions-networkpolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i extensions-networkpolicy-editor appscode/extensions-networkpolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/extensions-podsecuritypolicy-editor/Chart.yaml b/charts/extensions-podsecuritypolicy-editor/Chart.yaml index cc60b4d3bd..831451447b 100644 --- a/charts/extensions-podsecuritypolicy-editor/Chart.yaml +++ b/charts/extensions-podsecuritypolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"extensions","version":"v1beta1","resource":"podsecuritypolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PodSecurityPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: extensions-podsecuritypolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/extensions-podsecuritypolicy-editor/README.md b/charts/extensions-podsecuritypolicy-editor/README.md index 59c67625f6..d46853a3a0 100644 --- a/charts/extensions-podsecuritypolicy-editor/README.md +++ b/charts/extensions-podsecuritypolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/extensions-podsecuritypolicy-editor --version=v0.23.0 -$ helm upgrade -i extensions-podsecuritypolicy-editor appscode/extensions-podsecuritypolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/extensions-podsecuritypolicy-editor --version=v0.24.0 +$ helm upgrade -i extensions-podsecuritypolicy-editor appscode/extensions-podsecuritypolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PodSecurityPolicy Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `extensions-podsecuritypolicy-editor`: ```bash -$ helm upgrade -i extensions-podsecuritypolicy-editor appscode/extensions-podsecuritypolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i extensions-podsecuritypolicy-editor appscode/extensions-podsecuritypolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PodSecurityPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `extensions-podsecu Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i extensions-podsecuritypolicy-editor appscode/extensions-podsecuritypolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=extensions/v1beta1 +$ helm upgrade -i extensions-podsecuritypolicy-editor appscode/extensions-podsecuritypolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=extensions/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i extensions-podsecuritypolicy-editor appscode/extensions-podsecuritypolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i extensions-podsecuritypolicy-editor appscode/extensions-podsecuritypolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/extensions-replicaset-editor/Chart.yaml b/charts/extensions-replicaset-editor/Chart.yaml index c685cb15d6..f4bacc0dd8 100644 --- a/charts/extensions-replicaset-editor/Chart.yaml +++ b/charts/extensions-replicaset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"extensions","version":"v1beta1","resource":"replicasets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ReplicaSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: extensions-replicaset-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/extensions-replicaset-editor/README.md b/charts/extensions-replicaset-editor/README.md index b5c59ebafa..583c8edd42 100644 --- a/charts/extensions-replicaset-editor/README.md +++ b/charts/extensions-replicaset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/extensions-replicaset-editor --version=v0.23.0 -$ helm upgrade -i extensions-replicaset-editor appscode/extensions-replicaset-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/extensions-replicaset-editor --version=v0.24.0 +$ helm upgrade -i extensions-replicaset-editor appscode/extensions-replicaset-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ReplicaSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `extensions-replicaset-editor`: ```bash -$ helm upgrade -i extensions-replicaset-editor appscode/extensions-replicaset-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i extensions-replicaset-editor appscode/extensions-replicaset-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ReplicaSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `extensions-replica Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i extensions-replicaset-editor appscode/extensions-replicaset-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=extensions/v1beta1 +$ helm upgrade -i extensions-replicaset-editor appscode/extensions-replicaset-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=extensions/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i extensions-replicaset-editor appscode/extensions-replicaset-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i extensions-replicaset-editor appscode/extensions-replicaset-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/extensions-scale-editor/Chart.yaml b/charts/extensions-scale-editor/Chart.yaml index 1d8ba85901..82662597d1 100644 --- a/charts/extensions-scale-editor/Chart.yaml +++ b/charts/extensions-scale-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"extensions","version":"v1beta1","resource":"scales"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Scale Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: extensions-scale-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/extensions-scale-editor/README.md b/charts/extensions-scale-editor/README.md index c9b5101a80..9d850e2005 100644 --- a/charts/extensions-scale-editor/README.md +++ b/charts/extensions-scale-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/extensions-scale-editor --version=v0.23.0 -$ helm upgrade -i extensions-scale-editor appscode/extensions-scale-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/extensions-scale-editor --version=v0.24.0 +$ helm upgrade -i extensions-scale-editor appscode/extensions-scale-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Scale Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `extensions-scale-editor`: ```bash -$ helm upgrade -i extensions-scale-editor appscode/extensions-scale-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i extensions-scale-editor appscode/extensions-scale-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Scale Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `extensions-scale-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i extensions-scale-editor appscode/extensions-scale-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=extensions/v1beta1 +$ helm upgrade -i extensions-scale-editor appscode/extensions-scale-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=extensions/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i extensions-scale-editor appscode/extensions-scale-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i extensions-scale-editor appscode/extensions-scale-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/externaldnsappscodecom-externaldns-editor/Chart.yaml b/charts/externaldnsappscodecom-externaldns-editor/Chart.yaml index 3c671931b0..f1eae19929 100644 --- a/charts/externaldnsappscodecom-externaldns-editor/Chart.yaml +++ b/charts/externaldnsappscodecom-externaldns-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"external-dns.appscode.com","version":"v1alpha1","resource":"externaldns"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ExternalDNS Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: externaldnsappscodecom-externaldns-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/externaldnsappscodecom-externaldns-editor/README.md b/charts/externaldnsappscodecom-externaldns-editor/README.md index 223bb55554..56ba288f82 100644 --- a/charts/externaldnsappscodecom-externaldns-editor/README.md +++ b/charts/externaldnsappscodecom-externaldns-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/externaldnsappscodecom-externaldns-editor --version=v0.23.0 -$ helm upgrade -i externaldnsappscodecom-externaldns-editor appscode/externaldnsappscodecom-externaldns-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/externaldnsappscodecom-externaldns-editor --version=v0.24.0 +$ helm upgrade -i externaldnsappscodecom-externaldns-editor appscode/externaldnsappscodecom-externaldns-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ExternalDNS Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `externaldnsappscodecom-externaldns-editor`: ```bash -$ helm upgrade -i externaldnsappscodecom-externaldns-editor appscode/externaldnsappscodecom-externaldns-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i externaldnsappscodecom-externaldns-editor appscode/externaldnsappscodecom-externaldns-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ExternalDNS Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `externaldnsappscod Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i externaldnsappscodecom-externaldns-editor appscode/externaldnsappscodecom-externaldns-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=external-dns.appscode.com/v1alpha1 +$ helm upgrade -i externaldnsappscodecom-externaldns-editor appscode/externaldnsappscodecom-externaldns-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=external-dns.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i externaldnsappscodecom-externaldns-editor appscode/externaldnsappscodecom-externaldns-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i externaldnsappscodecom-externaldns-editor appscode/externaldnsappscodecom-externaldns-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/falcoappscodecom-falcoevent-editor/Chart.yaml b/charts/falcoappscodecom-falcoevent-editor/Chart.yaml index 1588a78028..965b1b1215 100644 --- a/charts/falcoappscodecom-falcoevent-editor/Chart.yaml +++ b/charts/falcoappscodecom-falcoevent-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"falco.appscode.com","version":"v1alpha1","resource":"falcoevents"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FalcoEvent Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: falcoappscodecom-falcoevent-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/falcoappscodecom-falcoevent-editor/README.md b/charts/falcoappscodecom-falcoevent-editor/README.md index 1554bee22c..ec5997c28f 100644 --- a/charts/falcoappscodecom-falcoevent-editor/README.md +++ b/charts/falcoappscodecom-falcoevent-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/falcoappscodecom-falcoevent-editor --version=v0.23.0 -$ helm upgrade -i falcoappscodecom-falcoevent-editor appscode/falcoappscodecom-falcoevent-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/falcoappscodecom-falcoevent-editor --version=v0.24.0 +$ helm upgrade -i falcoappscodecom-falcoevent-editor appscode/falcoappscodecom-falcoevent-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FalcoEvent Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `falcoappscodecom-falcoevent-editor`: ```bash -$ helm upgrade -i falcoappscodecom-falcoevent-editor appscode/falcoappscodecom-falcoevent-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i falcoappscodecom-falcoevent-editor appscode/falcoappscodecom-falcoevent-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FalcoEvent Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `falcoappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i falcoappscodecom-falcoevent-editor appscode/falcoappscodecom-falcoevent-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=falco.appscode.com/v1alpha1 +$ helm upgrade -i falcoappscodecom-falcoevent-editor appscode/falcoappscodecom-falcoevent-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=falco.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i falcoappscodecom-falcoevent-editor appscode/falcoappscodecom-falcoevent-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i falcoappscodecom-falcoevent-editor appscode/falcoappscodecom-falcoevent-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/flowcontrolapiserverk8sio-flowschema-editor/Chart.yaml b/charts/flowcontrolapiserverk8sio-flowschema-editor/Chart.yaml index f1511b9e3c..b4ad005ad1 100644 --- a/charts/flowcontrolapiserverk8sio-flowschema-editor/Chart.yaml +++ b/charts/flowcontrolapiserverk8sio-flowschema-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"flowcontrol.apiserver.k8s.io","version":"v1beta1","resource":"flowschemas"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FlowSchema Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: flowcontrolapiserverk8sio-flowschema-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/flowcontrolapiserverk8sio-flowschema-editor/README.md b/charts/flowcontrolapiserverk8sio-flowschema-editor/README.md index b387bf7ac5..02e5694d9c 100644 --- a/charts/flowcontrolapiserverk8sio-flowschema-editor/README.md +++ b/charts/flowcontrolapiserverk8sio-flowschema-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/flowcontrolapiserverk8sio-flowschema-editor --version=v0.23.0 -$ helm upgrade -i flowcontrolapiserverk8sio-flowschema-editor appscode/flowcontrolapiserverk8sio-flowschema-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/flowcontrolapiserverk8sio-flowschema-editor --version=v0.24.0 +$ helm upgrade -i flowcontrolapiserverk8sio-flowschema-editor appscode/flowcontrolapiserverk8sio-flowschema-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FlowSchema Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `flowcontrolapiserverk8sio-flowschema-editor`: ```bash -$ helm upgrade -i flowcontrolapiserverk8sio-flowschema-editor appscode/flowcontrolapiserverk8sio-flowschema-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i flowcontrolapiserverk8sio-flowschema-editor appscode/flowcontrolapiserverk8sio-flowschema-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FlowSchema Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `flowcontrolapiserv Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i flowcontrolapiserverk8sio-flowschema-editor appscode/flowcontrolapiserverk8sio-flowschema-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=flowcontrol.apiserver.k8s.io/v1beta1 +$ helm upgrade -i flowcontrolapiserverk8sio-flowschema-editor appscode/flowcontrolapiserverk8sio-flowschema-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=flowcontrol.apiserver.k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i flowcontrolapiserverk8sio-flowschema-editor appscode/flowcontrolapiserverk8sio-flowschema-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i flowcontrolapiserverk8sio-flowschema-editor appscode/flowcontrolapiserverk8sio-flowschema-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor/Chart.yaml b/charts/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor/Chart.yaml index ed823af603..f7a94d2f3e 100644 --- a/charts/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor/Chart.yaml +++ b/charts/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"flowcontrol.apiserver.k8s.io","version":"v1beta1","resource":"prioritylevelconfigurations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PriorityLevelConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: flowcontrolapiserverk8sio-prioritylevelconfiguration-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor/README.md b/charts/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor/README.md index 9d965fa649..22068d3904 100644 --- a/charts/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor/README.md +++ b/charts/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor --version=v0.23.0 -$ helm upgrade -i flowcontrolapiserverk8sio-prioritylevelconfiguration-editor appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor --version=v0.24.0 +$ helm upgrade -i flowcontrolapiserverk8sio-prioritylevelconfiguration-editor appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PriorityLevelConfiguration Editor on a [Kubernetes](http:// To install/upgrade the chart with the release name `flowcontrolapiserverk8sio-prioritylevelconfiguration-editor`: ```bash -$ helm upgrade -i flowcontrolapiserverk8sio-prioritylevelconfiguration-editor appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i flowcontrolapiserverk8sio-prioritylevelconfiguration-editor appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PriorityLevelConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `flowcontrolapiserv Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i flowcontrolapiserverk8sio-prioritylevelconfiguration-editor appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=flowcontrol.apiserver.k8s.io/v1beta1 +$ helm upgrade -i flowcontrolapiserverk8sio-prioritylevelconfiguration-editor appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=flowcontrol.apiserver.k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i flowcontrolapiserverk8sio-prioritylevelconfiguration-editor appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i flowcontrolapiserverk8sio-prioritylevelconfiguration-editor appscode/flowcontrolapiserverk8sio-prioritylevelconfiguration-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/fluxcdopenclustermanagementio-fluxcdconfig-editor/Chart.yaml b/charts/fluxcdopenclustermanagementio-fluxcdconfig-editor/Chart.yaml index ff875c808c..f7eaa2f3e9 100644 --- a/charts/fluxcdopenclustermanagementio-fluxcdconfig-editor/Chart.yaml +++ b/charts/fluxcdopenclustermanagementio-fluxcdconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"fluxcd.open-cluster-management.io","version":"v1alpha1","resource":"fluxcdconfigs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FluxCDConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: fluxcdopenclustermanagementio-fluxcdconfig-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/fluxcdopenclustermanagementio-fluxcdconfig-editor/README.md b/charts/fluxcdopenclustermanagementio-fluxcdconfig-editor/README.md index 4800a1a24e..a0ded733d8 100644 --- a/charts/fluxcdopenclustermanagementio-fluxcdconfig-editor/README.md +++ b/charts/fluxcdopenclustermanagementio-fluxcdconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor --version=v0.23.0 -$ helm upgrade -i fluxcdopenclustermanagementio-fluxcdconfig-editor appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor --version=v0.24.0 +$ helm upgrade -i fluxcdopenclustermanagementio-fluxcdconfig-editor appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FluxCDConfig Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `fluxcdopenclustermanagementio-fluxcdconfig-editor`: ```bash -$ helm upgrade -i fluxcdopenclustermanagementio-fluxcdconfig-editor appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i fluxcdopenclustermanagementio-fluxcdconfig-editor appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FluxCDConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `fluxcdopenclusterm Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i fluxcdopenclustermanagementio-fluxcdconfig-editor appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=fluxcd.open-cluster-management.io/v1alpha1 +$ helm upgrade -i fluxcdopenclustermanagementio-fluxcdconfig-editor appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=fluxcd.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i fluxcdopenclustermanagementio-fluxcdconfig-editor appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i fluxcdopenclustermanagementio-fluxcdconfig-editor appscode/fluxcdopenclustermanagementio-fluxcdconfig-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewaycatalogappscodecom-gatewayconfig-editor/Chart.yaml b/charts/gatewaycatalogappscodecom-gatewayconfig-editor/Chart.yaml index 63159937eb..17b698dc6b 100644 --- a/charts/gatewaycatalogappscodecom-gatewayconfig-editor/Chart.yaml +++ b/charts/gatewaycatalogappscodecom-gatewayconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.catalog.appscode.com","version":"v1alpha1","resource":"gatewayconfigs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GatewayConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaycatalogappscodecom-gatewayconfig-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewaycatalogappscodecom-gatewayconfig-editor/README.md b/charts/gatewaycatalogappscodecom-gatewayconfig-editor/README.md index e109625db6..55198aef8a 100644 --- a/charts/gatewaycatalogappscodecom-gatewayconfig-editor/README.md +++ b/charts/gatewaycatalogappscodecom-gatewayconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaycatalogappscodecom-gatewayconfig-editor --version=v0.23.0 -$ helm upgrade -i gatewaycatalogappscodecom-gatewayconfig-editor appscode/gatewaycatalogappscodecom-gatewayconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewaycatalogappscodecom-gatewayconfig-editor --version=v0.24.0 +$ helm upgrade -i gatewaycatalogappscodecom-gatewayconfig-editor appscode/gatewaycatalogappscodecom-gatewayconfig-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GatewayConfig Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `gatewaycatalogappscodecom-gatewayconfig-editor`: ```bash -$ helm upgrade -i gatewaycatalogappscodecom-gatewayconfig-editor appscode/gatewaycatalogappscodecom-gatewayconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewaycatalogappscodecom-gatewayconfig-editor appscode/gatewaycatalogappscodecom-gatewayconfig-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GatewayConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaycatalogapps Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaycatalogappscodecom-gatewayconfig-editor appscode/gatewaycatalogappscodecom-gatewayconfig-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.catalog.appscode.com/v1alpha1 +$ helm upgrade -i gatewaycatalogappscodecom-gatewayconfig-editor appscode/gatewaycatalogappscodecom-gatewayconfig-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaycatalogappscodecom-gatewayconfig-editor appscode/gatewaycatalogappscodecom-gatewayconfig-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewaycatalogappscodecom-gatewayconfig-editor appscode/gatewaycatalogappscodecom-gatewayconfig-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewaycatalogappscodecom-gatewaypreset-editor/Chart.yaml b/charts/gatewaycatalogappscodecom-gatewaypreset-editor/Chart.yaml index 59448cbe66..8ca59f57eb 100644 --- a/charts/gatewaycatalogappscodecom-gatewaypreset-editor/Chart.yaml +++ b/charts/gatewaycatalogappscodecom-gatewaypreset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.catalog.appscode.com","version":"v1alpha1","resource":"gatewaypresets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GatewayPreset Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaycatalogappscodecom-gatewaypreset-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewaycatalogappscodecom-gatewaypreset-editor/README.md b/charts/gatewaycatalogappscodecom-gatewaypreset-editor/README.md index 4dad81ad71..7ca8fd6e31 100644 --- a/charts/gatewaycatalogappscodecom-gatewaypreset-editor/README.md +++ b/charts/gatewaycatalogappscodecom-gatewaypreset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaycatalogappscodecom-gatewaypreset-editor --version=v0.23.0 -$ helm upgrade -i gatewaycatalogappscodecom-gatewaypreset-editor appscode/gatewaycatalogappscodecom-gatewaypreset-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewaycatalogappscodecom-gatewaypreset-editor --version=v0.24.0 +$ helm upgrade -i gatewaycatalogappscodecom-gatewaypreset-editor appscode/gatewaycatalogappscodecom-gatewaypreset-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GatewayPreset Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `gatewaycatalogappscodecom-gatewaypreset-editor`: ```bash -$ helm upgrade -i gatewaycatalogappscodecom-gatewaypreset-editor appscode/gatewaycatalogappscodecom-gatewaypreset-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewaycatalogappscodecom-gatewaypreset-editor appscode/gatewaycatalogappscodecom-gatewaypreset-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GatewayPreset Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaycatalogapps Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaycatalogappscodecom-gatewaypreset-editor appscode/gatewaycatalogappscodecom-gatewaypreset-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.catalog.appscode.com/v1alpha1 +$ helm upgrade -i gatewaycatalogappscodecom-gatewaypreset-editor appscode/gatewaycatalogappscodecom-gatewaypreset-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.catalog.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaycatalogappscodecom-gatewaypreset-editor appscode/gatewaycatalogappscodecom-gatewaypreset-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewaycatalogappscodecom-gatewaypreset-editor appscode/gatewaycatalogappscodecom-gatewaypreset-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-authenticationfilter-editor/Chart.yaml b/charts/gatewayenvoyproxyio-authenticationfilter-editor/Chart.yaml index f046ebd3ca..ea55f59788 100644 --- a/charts/gatewayenvoyproxyio-authenticationfilter-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-authenticationfilter-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"authenticationfilters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AuthenticationFilter Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-authenticationfilter-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayenvoyproxyio-authenticationfilter-editor/README.md b/charts/gatewayenvoyproxyio-authenticationfilter-editor/README.md index 05202e02de..45bd7b6c76 100644 --- a/charts/gatewayenvoyproxyio-authenticationfilter-editor/README.md +++ b/charts/gatewayenvoyproxyio-authenticationfilter-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-authenticationfilter-editor --version=v0.23.0 -$ helm upgrade -i gatewayenvoyproxyio-authenticationfilter-editor appscode/gatewayenvoyproxyio-authenticationfilter-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayenvoyproxyio-authenticationfilter-editor --version=v0.24.0 +$ helm upgrade -i gatewayenvoyproxyio-authenticationfilter-editor appscode/gatewayenvoyproxyio-authenticationfilter-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AuthenticationFilter Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `gatewayenvoyproxyio-authenticationfilter-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-authenticationfilter-editor appscode/gatewayenvoyproxyio-authenticationfilter-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayenvoyproxyio-authenticationfilter-editor appscode/gatewayenvoyproxyio-authenticationfilter-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AuthenticationFilter Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-authenticationfilter-editor appscode/gatewayenvoyproxyio-authenticationfilter-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-authenticationfilter-editor appscode/gatewayenvoyproxyio-authenticationfilter-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-authenticationfilter-editor appscode/gatewayenvoyproxyio-authenticationfilter-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-authenticationfilter-editor appscode/gatewayenvoyproxyio-authenticationfilter-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-backend-editor/Chart.yaml b/charts/gatewayenvoyproxyio-backend-editor/Chart.yaml index 732406a7b5..e311735e68 100644 --- a/charts/gatewayenvoyproxyio-backend-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-backend-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"backends"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Backend Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-backend-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayenvoyproxyio-backend-editor/README.md b/charts/gatewayenvoyproxyio-backend-editor/README.md index 1ce202ae41..5500e5770f 100644 --- a/charts/gatewayenvoyproxyio-backend-editor/README.md +++ b/charts/gatewayenvoyproxyio-backend-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-backend-editor --version=v0.23.0 -$ helm upgrade -i gatewayenvoyproxyio-backend-editor appscode/gatewayenvoyproxyio-backend-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayenvoyproxyio-backend-editor --version=v0.24.0 +$ helm upgrade -i gatewayenvoyproxyio-backend-editor appscode/gatewayenvoyproxyio-backend-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Backend Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `gatewayenvoyproxyio-backend-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-backend-editor appscode/gatewayenvoyproxyio-backend-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayenvoyproxyio-backend-editor appscode/gatewayenvoyproxyio-backend-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Backend Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-backend-editor appscode/gatewayenvoyproxyio-backend-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-backend-editor appscode/gatewayenvoyproxyio-backend-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-backend-editor appscode/gatewayenvoyproxyio-backend-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-backend-editor appscode/gatewayenvoyproxyio-backend-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-backendtrafficpolicy-editor/Chart.yaml b/charts/gatewayenvoyproxyio-backendtrafficpolicy-editor/Chart.yaml index 9f66a14af7..bb2ace8e78 100644 --- a/charts/gatewayenvoyproxyio-backendtrafficpolicy-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-backendtrafficpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"backendtrafficpolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: BackendTrafficPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-backendtrafficpolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayenvoyproxyio-backendtrafficpolicy-editor/README.md b/charts/gatewayenvoyproxyio-backendtrafficpolicy-editor/README.md index 13c39190fd..b8671e86f3 100644 --- a/charts/gatewayenvoyproxyio-backendtrafficpolicy-editor/README.md +++ b/charts/gatewayenvoyproxyio-backendtrafficpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor --version=v0.23.0 -$ helm upgrade -i gatewayenvoyproxyio-backendtrafficpolicy-editor appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor --version=v0.24.0 +$ helm upgrade -i gatewayenvoyproxyio-backendtrafficpolicy-editor appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackendTrafficPolicy Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `gatewayenvoyproxyio-backendtrafficpolicy-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-backendtrafficpolicy-editor appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayenvoyproxyio-backendtrafficpolicy-editor appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a BackendTrafficPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-backendtrafficpolicy-editor appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-backendtrafficpolicy-editor appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-backendtrafficpolicy-editor appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-backendtrafficpolicy-editor appscode/gatewayenvoyproxyio-backendtrafficpolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-clienttrafficpolicy-editor/Chart.yaml b/charts/gatewayenvoyproxyio-clienttrafficpolicy-editor/Chart.yaml index 67338e0d8c..51755fcf60 100644 --- a/charts/gatewayenvoyproxyio-clienttrafficpolicy-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-clienttrafficpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"clienttrafficpolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClientTrafficPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-clienttrafficpolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayenvoyproxyio-clienttrafficpolicy-editor/README.md b/charts/gatewayenvoyproxyio-clienttrafficpolicy-editor/README.md index 2213146ccc..fb54d73854 100644 --- a/charts/gatewayenvoyproxyio-clienttrafficpolicy-editor/README.md +++ b/charts/gatewayenvoyproxyio-clienttrafficpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor --version=v0.23.0 -$ helm upgrade -i gatewayenvoyproxyio-clienttrafficpolicy-editor appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor --version=v0.24.0 +$ helm upgrade -i gatewayenvoyproxyio-clienttrafficpolicy-editor appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClientTrafficPolicy Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `gatewayenvoyproxyio-clienttrafficpolicy-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-clienttrafficpolicy-editor appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayenvoyproxyio-clienttrafficpolicy-editor appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClientTrafficPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-clienttrafficpolicy-editor appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-clienttrafficpolicy-editor appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-clienttrafficpolicy-editor appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-clienttrafficpolicy-editor appscode/gatewayenvoyproxyio-clienttrafficpolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-envoyextensionpolicy-editor/Chart.yaml b/charts/gatewayenvoyproxyio-envoyextensionpolicy-editor/Chart.yaml index 790a8cef3e..8a61605e40 100644 --- a/charts/gatewayenvoyproxyio-envoyextensionpolicy-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-envoyextensionpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"envoyextensionpolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: EnvoyExtensionPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-envoyextensionpolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayenvoyproxyio-envoyextensionpolicy-editor/README.md b/charts/gatewayenvoyproxyio-envoyextensionpolicy-editor/README.md index f5e7bf053b..bb279afebc 100644 --- a/charts/gatewayenvoyproxyio-envoyextensionpolicy-editor/README.md +++ b/charts/gatewayenvoyproxyio-envoyextensionpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor --version=v0.23.0 -$ helm upgrade -i gatewayenvoyproxyio-envoyextensionpolicy-editor appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor --version=v0.24.0 +$ helm upgrade -i gatewayenvoyproxyio-envoyextensionpolicy-editor appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EnvoyExtensionPolicy Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `gatewayenvoyproxyio-envoyextensionpolicy-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoyextensionpolicy-editor appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayenvoyproxyio-envoyextensionpolicy-editor appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a EnvoyExtensionPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoyextensionpolicy-editor appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-envoyextensionpolicy-editor appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoyextensionpolicy-editor appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-envoyextensionpolicy-editor appscode/gatewayenvoyproxyio-envoyextensionpolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-envoypatchpolicy-editor/Chart.yaml b/charts/gatewayenvoyproxyio-envoypatchpolicy-editor/Chart.yaml index 76b274a6b0..65552f176f 100644 --- a/charts/gatewayenvoyproxyio-envoypatchpolicy-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-envoypatchpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"envoypatchpolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: EnvoyPatchPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-envoypatchpolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayenvoyproxyio-envoypatchpolicy-editor/README.md b/charts/gatewayenvoyproxyio-envoypatchpolicy-editor/README.md index 40531ab75b..370f26f3aa 100644 --- a/charts/gatewayenvoyproxyio-envoypatchpolicy-editor/README.md +++ b/charts/gatewayenvoyproxyio-envoypatchpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-envoypatchpolicy-editor --version=v0.23.0 -$ helm upgrade -i gatewayenvoyproxyio-envoypatchpolicy-editor appscode/gatewayenvoyproxyio-envoypatchpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayenvoyproxyio-envoypatchpolicy-editor --version=v0.24.0 +$ helm upgrade -i gatewayenvoyproxyio-envoypatchpolicy-editor appscode/gatewayenvoyproxyio-envoypatchpolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EnvoyPatchPolicy Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `gatewayenvoyproxyio-envoypatchpolicy-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoypatchpolicy-editor appscode/gatewayenvoyproxyio-envoypatchpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayenvoyproxyio-envoypatchpolicy-editor appscode/gatewayenvoyproxyio-envoypatchpolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a EnvoyPatchPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoypatchpolicy-editor appscode/gatewayenvoyproxyio-envoypatchpolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-envoypatchpolicy-editor appscode/gatewayenvoyproxyio-envoypatchpolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoypatchpolicy-editor appscode/gatewayenvoyproxyio-envoypatchpolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-envoypatchpolicy-editor appscode/gatewayenvoyproxyio-envoypatchpolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-envoyproxy-editor/Chart.yaml b/charts/gatewayenvoyproxyio-envoyproxy-editor/Chart.yaml index a03d965017..cc08a8d637 100644 --- a/charts/gatewayenvoyproxyio-envoyproxy-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-envoyproxy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"envoyproxies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: EnvoyProxy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-envoyproxy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayenvoyproxyio-envoyproxy-editor/README.md b/charts/gatewayenvoyproxyio-envoyproxy-editor/README.md index 66652699b7..f9de569e55 100644 --- a/charts/gatewayenvoyproxyio-envoyproxy-editor/README.md +++ b/charts/gatewayenvoyproxyio-envoyproxy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-envoyproxy-editor --version=v0.23.0 -$ helm upgrade -i gatewayenvoyproxyio-envoyproxy-editor appscode/gatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayenvoyproxyio-envoyproxy-editor --version=v0.24.0 +$ helm upgrade -i gatewayenvoyproxyio-envoyproxy-editor appscode/gatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EnvoyProxy Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `gatewayenvoyproxyio-envoyproxy-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoyproxy-editor appscode/gatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayenvoyproxyio-envoyproxy-editor appscode/gatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a EnvoyProxy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoyproxy-editor appscode/gatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-envoyproxy-editor appscode/gatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-envoyproxy-editor appscode/gatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-envoyproxy-editor appscode/gatewayenvoyproxyio-envoyproxy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-httproutefilter-editor/Chart.yaml b/charts/gatewayenvoyproxyio-httproutefilter-editor/Chart.yaml index 68f762c061..7045112c56 100644 --- a/charts/gatewayenvoyproxyio-httproutefilter-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-httproutefilter-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"httproutefilters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: HTTPRouteFilter Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-httproutefilter-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayenvoyproxyio-httproutefilter-editor/README.md b/charts/gatewayenvoyproxyio-httproutefilter-editor/README.md index ead02d9d90..b7feb4c5db 100644 --- a/charts/gatewayenvoyproxyio-httproutefilter-editor/README.md +++ b/charts/gatewayenvoyproxyio-httproutefilter-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-httproutefilter-editor --version=v0.23.0 -$ helm upgrade -i gatewayenvoyproxyio-httproutefilter-editor appscode/gatewayenvoyproxyio-httproutefilter-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayenvoyproxyio-httproutefilter-editor --version=v0.24.0 +$ helm upgrade -i gatewayenvoyproxyio-httproutefilter-editor appscode/gatewayenvoyproxyio-httproutefilter-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HTTPRouteFilter Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `gatewayenvoyproxyio-httproutefilter-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-httproutefilter-editor appscode/gatewayenvoyproxyio-httproutefilter-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayenvoyproxyio-httproutefilter-editor appscode/gatewayenvoyproxyio-httproutefilter-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a HTTPRouteFilter Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-httproutefilter-editor appscode/gatewayenvoyproxyio-httproutefilter-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-httproutefilter-editor appscode/gatewayenvoyproxyio-httproutefilter-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-httproutefilter-editor appscode/gatewayenvoyproxyio-httproutefilter-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-httproutefilter-editor appscode/gatewayenvoyproxyio-httproutefilter-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-ratelimitfilter-editor/Chart.yaml b/charts/gatewayenvoyproxyio-ratelimitfilter-editor/Chart.yaml index 551f808672..dc00098fc6 100644 --- a/charts/gatewayenvoyproxyio-ratelimitfilter-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-ratelimitfilter-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"ratelimitfilters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RateLimitFilter Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-ratelimitfilter-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayenvoyproxyio-ratelimitfilter-editor/README.md b/charts/gatewayenvoyproxyio-ratelimitfilter-editor/README.md index 13d319f105..1cf6a1e83f 100644 --- a/charts/gatewayenvoyproxyio-ratelimitfilter-editor/README.md +++ b/charts/gatewayenvoyproxyio-ratelimitfilter-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-ratelimitfilter-editor --version=v0.23.0 -$ helm upgrade -i gatewayenvoyproxyio-ratelimitfilter-editor appscode/gatewayenvoyproxyio-ratelimitfilter-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayenvoyproxyio-ratelimitfilter-editor --version=v0.24.0 +$ helm upgrade -i gatewayenvoyproxyio-ratelimitfilter-editor appscode/gatewayenvoyproxyio-ratelimitfilter-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RateLimitFilter Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `gatewayenvoyproxyio-ratelimitfilter-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-ratelimitfilter-editor appscode/gatewayenvoyproxyio-ratelimitfilter-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayenvoyproxyio-ratelimitfilter-editor appscode/gatewayenvoyproxyio-ratelimitfilter-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RateLimitFilter Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-ratelimitfilter-editor appscode/gatewayenvoyproxyio-ratelimitfilter-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-ratelimitfilter-editor appscode/gatewayenvoyproxyio-ratelimitfilter-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-ratelimitfilter-editor appscode/gatewayenvoyproxyio-ratelimitfilter-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-ratelimitfilter-editor appscode/gatewayenvoyproxyio-ratelimitfilter-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayenvoyproxyio-securitypolicy-editor/Chart.yaml b/charts/gatewayenvoyproxyio-securitypolicy-editor/Chart.yaml index 49994dd4d8..f3286d2810 100644 --- a/charts/gatewayenvoyproxyio-securitypolicy-editor/Chart.yaml +++ b/charts/gatewayenvoyproxyio-securitypolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.envoyproxy.io","version":"v1alpha1","resource":"securitypolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SecurityPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayenvoyproxyio-securitypolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayenvoyproxyio-securitypolicy-editor/README.md b/charts/gatewayenvoyproxyio-securitypolicy-editor/README.md index 69705c6596..822191c074 100644 --- a/charts/gatewayenvoyproxyio-securitypolicy-editor/README.md +++ b/charts/gatewayenvoyproxyio-securitypolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayenvoyproxyio-securitypolicy-editor --version=v0.23.0 -$ helm upgrade -i gatewayenvoyproxyio-securitypolicy-editor appscode/gatewayenvoyproxyio-securitypolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayenvoyproxyio-securitypolicy-editor --version=v0.24.0 +$ helm upgrade -i gatewayenvoyproxyio-securitypolicy-editor appscode/gatewayenvoyproxyio-securitypolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecurityPolicy Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `gatewayenvoyproxyio-securitypolicy-editor`: ```bash -$ helm upgrade -i gatewayenvoyproxyio-securitypolicy-editor appscode/gatewayenvoyproxyio-securitypolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayenvoyproxyio-securitypolicy-editor appscode/gatewayenvoyproxyio-securitypolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SecurityPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayenvoyproxyi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-securitypolicy-editor appscode/gatewayenvoyproxyio-securitypolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 +$ helm upgrade -i gatewayenvoyproxyio-securitypolicy-editor appscode/gatewayenvoyproxyio-securitypolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.envoyproxy.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayenvoyproxyio-securitypolicy-editor appscode/gatewayenvoyproxyio-securitypolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayenvoyproxyio-securitypolicy-editor appscode/gatewayenvoyproxyio-securitypolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-backendlbpolicy-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-backendlbpolicy-editor/Chart.yaml index 4c35db1d72..65e55669a5 100644 --- a/charts/gatewaynetworkingk8sio-backendlbpolicy-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-backendlbpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1alpha2","resource":"backendlbpolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: BackendLBPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-backendlbpolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewaynetworkingk8sio-backendlbpolicy-editor/README.md b/charts/gatewaynetworkingk8sio-backendlbpolicy-editor/README.md index 594978c065..7ed217ba57 100644 --- a/charts/gatewaynetworkingk8sio-backendlbpolicy-editor/README.md +++ b/charts/gatewaynetworkingk8sio-backendlbpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-backendlbpolicy-editor --version=v0.23.0 -$ helm upgrade -i gatewaynetworkingk8sio-backendlbpolicy-editor appscode/gatewaynetworkingk8sio-backendlbpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewaynetworkingk8sio-backendlbpolicy-editor --version=v0.24.0 +$ helm upgrade -i gatewaynetworkingk8sio-backendlbpolicy-editor appscode/gatewaynetworkingk8sio-backendlbpolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackendLBPolicy Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `gatewaynetworkingk8sio-backendlbpolicy-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-backendlbpolicy-editor appscode/gatewaynetworkingk8sio-backendlbpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewaynetworkingk8sio-backendlbpolicy-editor appscode/gatewaynetworkingk8sio-backendlbpolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a BackendLBPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-backendlbpolicy-editor appscode/gatewaynetworkingk8sio-backendlbpolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.networking.k8s.io/v1alpha2 +$ helm upgrade -i gatewaynetworkingk8sio-backendlbpolicy-editor appscode/gatewaynetworkingk8sio-backendlbpolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.networking.k8s.io/v1alpha2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-backendlbpolicy-editor appscode/gatewaynetworkingk8sio-backendlbpolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-backendlbpolicy-editor appscode/gatewaynetworkingk8sio-backendlbpolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-backendtlspolicy-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-backendtlspolicy-editor/Chart.yaml index c348570498..b1787248b1 100644 --- a/charts/gatewaynetworkingk8sio-backendtlspolicy-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-backendtlspolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1alpha3","resource":"backendtlspolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: BackendTLSPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-backendtlspolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewaynetworkingk8sio-backendtlspolicy-editor/README.md b/charts/gatewaynetworkingk8sio-backendtlspolicy-editor/README.md index 12175368d9..2653a0af18 100644 --- a/charts/gatewaynetworkingk8sio-backendtlspolicy-editor/README.md +++ b/charts/gatewaynetworkingk8sio-backendtlspolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-backendtlspolicy-editor --version=v0.23.0 -$ helm upgrade -i gatewaynetworkingk8sio-backendtlspolicy-editor appscode/gatewaynetworkingk8sio-backendtlspolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewaynetworkingk8sio-backendtlspolicy-editor --version=v0.24.0 +$ helm upgrade -i gatewaynetworkingk8sio-backendtlspolicy-editor appscode/gatewaynetworkingk8sio-backendtlspolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackendTLSPolicy Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `gatewaynetworkingk8sio-backendtlspolicy-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-backendtlspolicy-editor appscode/gatewaynetworkingk8sio-backendtlspolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewaynetworkingk8sio-backendtlspolicy-editor appscode/gatewaynetworkingk8sio-backendtlspolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a BackendTLSPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-backendtlspolicy-editor appscode/gatewaynetworkingk8sio-backendtlspolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.networking.k8s.io/v1alpha3 +$ helm upgrade -i gatewaynetworkingk8sio-backendtlspolicy-editor appscode/gatewaynetworkingk8sio-backendtlspolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.networking.k8s.io/v1alpha3 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-backendtlspolicy-editor appscode/gatewaynetworkingk8sio-backendtlspolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-backendtlspolicy-editor appscode/gatewaynetworkingk8sio-backendtlspolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-gateway-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-gateway-editor/Chart.yaml index 0b0f9fadd9..70d5c9d48c 100644 --- a/charts/gatewaynetworkingk8sio-gateway-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-gateway-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1","resource":"gateways"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Gateway Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-gateway-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewaynetworkingk8sio-gateway-editor/README.md b/charts/gatewaynetworkingk8sio-gateway-editor/README.md index 8635fc2abf..9227ae4580 100644 --- a/charts/gatewaynetworkingk8sio-gateway-editor/README.md +++ b/charts/gatewaynetworkingk8sio-gateway-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-gateway-editor --version=v0.23.0 -$ helm upgrade -i gatewaynetworkingk8sio-gateway-editor appscode/gatewaynetworkingk8sio-gateway-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewaynetworkingk8sio-gateway-editor --version=v0.24.0 +$ helm upgrade -i gatewaynetworkingk8sio-gateway-editor appscode/gatewaynetworkingk8sio-gateway-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Gateway Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `gatewaynetworkingk8sio-gateway-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-gateway-editor appscode/gatewaynetworkingk8sio-gateway-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewaynetworkingk8sio-gateway-editor appscode/gatewaynetworkingk8sio-gateway-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Gateway Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-gateway-editor appscode/gatewaynetworkingk8sio-gateway-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.networking.k8s.io/v1 +$ helm upgrade -i gatewaynetworkingk8sio-gateway-editor appscode/gatewaynetworkingk8sio-gateway-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.networking.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-gateway-editor appscode/gatewaynetworkingk8sio-gateway-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-gateway-editor appscode/gatewaynetworkingk8sio-gateway-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-gatewayclass-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-gatewayclass-editor/Chart.yaml index 612109ed1b..ea89ec42d4 100644 --- a/charts/gatewaynetworkingk8sio-gatewayclass-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-gatewayclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1","resource":"gatewayclasses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GatewayClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-gatewayclass-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewaynetworkingk8sio-gatewayclass-editor/README.md b/charts/gatewaynetworkingk8sio-gatewayclass-editor/README.md index 115e91866e..395219b999 100644 --- a/charts/gatewaynetworkingk8sio-gatewayclass-editor/README.md +++ b/charts/gatewaynetworkingk8sio-gatewayclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-gatewayclass-editor --version=v0.23.0 -$ helm upgrade -i gatewaynetworkingk8sio-gatewayclass-editor appscode/gatewaynetworkingk8sio-gatewayclass-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewaynetworkingk8sio-gatewayclass-editor --version=v0.24.0 +$ helm upgrade -i gatewaynetworkingk8sio-gatewayclass-editor appscode/gatewaynetworkingk8sio-gatewayclass-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GatewayClass Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `gatewaynetworkingk8sio-gatewayclass-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-gatewayclass-editor appscode/gatewaynetworkingk8sio-gatewayclass-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewaynetworkingk8sio-gatewayclass-editor appscode/gatewaynetworkingk8sio-gatewayclass-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GatewayClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-gatewayclass-editor appscode/gatewaynetworkingk8sio-gatewayclass-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.networking.k8s.io/v1 +$ helm upgrade -i gatewaynetworkingk8sio-gatewayclass-editor appscode/gatewaynetworkingk8sio-gatewayclass-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.networking.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-gatewayclass-editor appscode/gatewaynetworkingk8sio-gatewayclass-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-gatewayclass-editor appscode/gatewaynetworkingk8sio-gatewayclass-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-grpcroute-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-grpcroute-editor/Chart.yaml index da039843c0..e88d95c92e 100644 --- a/charts/gatewaynetworkingk8sio-grpcroute-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-grpcroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1","resource":"grpcroutes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GRPCRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-grpcroute-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewaynetworkingk8sio-grpcroute-editor/README.md b/charts/gatewaynetworkingk8sio-grpcroute-editor/README.md index e829451ae6..47b5d83d7a 100644 --- a/charts/gatewaynetworkingk8sio-grpcroute-editor/README.md +++ b/charts/gatewaynetworkingk8sio-grpcroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-grpcroute-editor --version=v0.23.0 -$ helm upgrade -i gatewaynetworkingk8sio-grpcroute-editor appscode/gatewaynetworkingk8sio-grpcroute-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewaynetworkingk8sio-grpcroute-editor --version=v0.24.0 +$ helm upgrade -i gatewaynetworkingk8sio-grpcroute-editor appscode/gatewaynetworkingk8sio-grpcroute-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GRPCRoute Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `gatewaynetworkingk8sio-grpcroute-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-grpcroute-editor appscode/gatewaynetworkingk8sio-grpcroute-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewaynetworkingk8sio-grpcroute-editor appscode/gatewaynetworkingk8sio-grpcroute-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GRPCRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-grpcroute-editor appscode/gatewaynetworkingk8sio-grpcroute-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.networking.k8s.io/v1 +$ helm upgrade -i gatewaynetworkingk8sio-grpcroute-editor appscode/gatewaynetworkingk8sio-grpcroute-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.networking.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-grpcroute-editor appscode/gatewaynetworkingk8sio-grpcroute-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-grpcroute-editor appscode/gatewaynetworkingk8sio-grpcroute-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-httproute-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-httproute-editor/Chart.yaml index 24dfc14b8c..3ba69c9044 100644 --- a/charts/gatewaynetworkingk8sio-httproute-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-httproute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1","resource":"httproutes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: HTTPRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-httproute-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewaynetworkingk8sio-httproute-editor/README.md b/charts/gatewaynetworkingk8sio-httproute-editor/README.md index cf7a5fd9fd..3ffc53e63d 100644 --- a/charts/gatewaynetworkingk8sio-httproute-editor/README.md +++ b/charts/gatewaynetworkingk8sio-httproute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-httproute-editor --version=v0.23.0 -$ helm upgrade -i gatewaynetworkingk8sio-httproute-editor appscode/gatewaynetworkingk8sio-httproute-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewaynetworkingk8sio-httproute-editor --version=v0.24.0 +$ helm upgrade -i gatewaynetworkingk8sio-httproute-editor appscode/gatewaynetworkingk8sio-httproute-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HTTPRoute Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `gatewaynetworkingk8sio-httproute-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-httproute-editor appscode/gatewaynetworkingk8sio-httproute-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewaynetworkingk8sio-httproute-editor appscode/gatewaynetworkingk8sio-httproute-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a HTTPRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-httproute-editor appscode/gatewaynetworkingk8sio-httproute-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.networking.k8s.io/v1 +$ helm upgrade -i gatewaynetworkingk8sio-httproute-editor appscode/gatewaynetworkingk8sio-httproute-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.networking.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-httproute-editor appscode/gatewaynetworkingk8sio-httproute-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-httproute-editor appscode/gatewaynetworkingk8sio-httproute-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-referencegrant-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-referencegrant-editor/Chart.yaml index 069086d997..b53e80a272 100644 --- a/charts/gatewaynetworkingk8sio-referencegrant-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-referencegrant-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1beta1","resource":"referencegrants"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ReferenceGrant Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-referencegrant-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewaynetworkingk8sio-referencegrant-editor/README.md b/charts/gatewaynetworkingk8sio-referencegrant-editor/README.md index 0bdf4944b2..138ff8c836 100644 --- a/charts/gatewaynetworkingk8sio-referencegrant-editor/README.md +++ b/charts/gatewaynetworkingk8sio-referencegrant-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-referencegrant-editor --version=v0.23.0 -$ helm upgrade -i gatewaynetworkingk8sio-referencegrant-editor appscode/gatewaynetworkingk8sio-referencegrant-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewaynetworkingk8sio-referencegrant-editor --version=v0.24.0 +$ helm upgrade -i gatewaynetworkingk8sio-referencegrant-editor appscode/gatewaynetworkingk8sio-referencegrant-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ReferenceGrant Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `gatewaynetworkingk8sio-referencegrant-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-referencegrant-editor appscode/gatewaynetworkingk8sio-referencegrant-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewaynetworkingk8sio-referencegrant-editor appscode/gatewaynetworkingk8sio-referencegrant-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ReferenceGrant Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-referencegrant-editor appscode/gatewaynetworkingk8sio-referencegrant-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.networking.k8s.io/v1beta1 +$ helm upgrade -i gatewaynetworkingk8sio-referencegrant-editor appscode/gatewaynetworkingk8sio-referencegrant-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.networking.k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-referencegrant-editor appscode/gatewaynetworkingk8sio-referencegrant-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-referencegrant-editor appscode/gatewaynetworkingk8sio-referencegrant-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-tcproute-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-tcproute-editor/Chart.yaml index 4d3eb310ee..d423c42a4b 100644 --- a/charts/gatewaynetworkingk8sio-tcproute-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-tcproute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1alpha2","resource":"tcproutes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: TCPRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-tcproute-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewaynetworkingk8sio-tcproute-editor/README.md b/charts/gatewaynetworkingk8sio-tcproute-editor/README.md index 08f1e80cb6..30c65838d8 100644 --- a/charts/gatewaynetworkingk8sio-tcproute-editor/README.md +++ b/charts/gatewaynetworkingk8sio-tcproute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-tcproute-editor --version=v0.23.0 -$ helm upgrade -i gatewaynetworkingk8sio-tcproute-editor appscode/gatewaynetworkingk8sio-tcproute-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewaynetworkingk8sio-tcproute-editor --version=v0.24.0 +$ helm upgrade -i gatewaynetworkingk8sio-tcproute-editor appscode/gatewaynetworkingk8sio-tcproute-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a TCPRoute Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `gatewaynetworkingk8sio-tcproute-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-tcproute-editor appscode/gatewaynetworkingk8sio-tcproute-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewaynetworkingk8sio-tcproute-editor appscode/gatewaynetworkingk8sio-tcproute-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a TCPRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-tcproute-editor appscode/gatewaynetworkingk8sio-tcproute-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.networking.k8s.io/v1alpha2 +$ helm upgrade -i gatewaynetworkingk8sio-tcproute-editor appscode/gatewaynetworkingk8sio-tcproute-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.networking.k8s.io/v1alpha2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-tcproute-editor appscode/gatewaynetworkingk8sio-tcproute-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-tcproute-editor appscode/gatewaynetworkingk8sio-tcproute-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-tlsroute-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-tlsroute-editor/Chart.yaml index 80d0dc972d..c6cef7934c 100644 --- a/charts/gatewaynetworkingk8sio-tlsroute-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-tlsroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1alpha2","resource":"tlsroutes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: TLSRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-tlsroute-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewaynetworkingk8sio-tlsroute-editor/README.md b/charts/gatewaynetworkingk8sio-tlsroute-editor/README.md index 4c7e07faff..0b66fce4aa 100644 --- a/charts/gatewaynetworkingk8sio-tlsroute-editor/README.md +++ b/charts/gatewaynetworkingk8sio-tlsroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-tlsroute-editor --version=v0.23.0 -$ helm upgrade -i gatewaynetworkingk8sio-tlsroute-editor appscode/gatewaynetworkingk8sio-tlsroute-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewaynetworkingk8sio-tlsroute-editor --version=v0.24.0 +$ helm upgrade -i gatewaynetworkingk8sio-tlsroute-editor appscode/gatewaynetworkingk8sio-tlsroute-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a TLSRoute Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `gatewaynetworkingk8sio-tlsroute-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-tlsroute-editor appscode/gatewaynetworkingk8sio-tlsroute-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewaynetworkingk8sio-tlsroute-editor appscode/gatewaynetworkingk8sio-tlsroute-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a TLSRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-tlsroute-editor appscode/gatewaynetworkingk8sio-tlsroute-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.networking.k8s.io/v1alpha2 +$ helm upgrade -i gatewaynetworkingk8sio-tlsroute-editor appscode/gatewaynetworkingk8sio-tlsroute-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.networking.k8s.io/v1alpha2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-tlsroute-editor appscode/gatewaynetworkingk8sio-tlsroute-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-tlsroute-editor appscode/gatewaynetworkingk8sio-tlsroute-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewaynetworkingk8sio-udproute-editor/Chart.yaml b/charts/gatewaynetworkingk8sio-udproute-editor/Chart.yaml index d3ced73ac1..c2c0d0c5a6 100644 --- a/charts/gatewaynetworkingk8sio-udproute-editor/Chart.yaml +++ b/charts/gatewaynetworkingk8sio-udproute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.networking.k8s.io","version":"v1alpha2","resource":"udproutes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: UDPRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewaynetworkingk8sio-udproute-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewaynetworkingk8sio-udproute-editor/README.md b/charts/gatewaynetworkingk8sio-udproute-editor/README.md index 03d1fc3c87..e92901960f 100644 --- a/charts/gatewaynetworkingk8sio-udproute-editor/README.md +++ b/charts/gatewaynetworkingk8sio-udproute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewaynetworkingk8sio-udproute-editor --version=v0.23.0 -$ helm upgrade -i gatewaynetworkingk8sio-udproute-editor appscode/gatewaynetworkingk8sio-udproute-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewaynetworkingk8sio-udproute-editor --version=v0.24.0 +$ helm upgrade -i gatewaynetworkingk8sio-udproute-editor appscode/gatewaynetworkingk8sio-udproute-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a UDPRoute Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `gatewaynetworkingk8sio-udproute-editor`: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-udproute-editor appscode/gatewaynetworkingk8sio-udproute-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewaynetworkingk8sio-udproute-editor appscode/gatewaynetworkingk8sio-udproute-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a UDPRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewaynetworkingk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-udproute-editor appscode/gatewaynetworkingk8sio-udproute-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.networking.k8s.io/v1alpha2 +$ helm upgrade -i gatewaynetworkingk8sio-udproute-editor appscode/gatewaynetworkingk8sio-udproute-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.networking.k8s.io/v1alpha2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewaynetworkingk8sio-udproute-editor appscode/gatewaynetworkingk8sio-udproute-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewaynetworkingk8sio-udproute-editor appscode/gatewaynetworkingk8sio-udproute-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayopenclustermanagementio-clustergateway-editor/Chart.yaml b/charts/gatewayopenclustermanagementio-clustergateway-editor/Chart.yaml index a66ccfd344..1e60eecc60 100644 --- a/charts/gatewayopenclustermanagementio-clustergateway-editor/Chart.yaml +++ b/charts/gatewayopenclustermanagementio-clustergateway-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.open-cluster-management.io","version":"v1alpha1","resource":"clustergateways"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterGateway Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayopenclustermanagementio-clustergateway-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayopenclustermanagementio-clustergateway-editor/README.md b/charts/gatewayopenclustermanagementio-clustergateway-editor/README.md index d349c612a4..27ef4a1360 100644 --- a/charts/gatewayopenclustermanagementio-clustergateway-editor/README.md +++ b/charts/gatewayopenclustermanagementio-clustergateway-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayopenclustermanagementio-clustergateway-editor --version=v0.23.0 -$ helm upgrade -i gatewayopenclustermanagementio-clustergateway-editor appscode/gatewayopenclustermanagementio-clustergateway-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayopenclustermanagementio-clustergateway-editor --version=v0.24.0 +$ helm upgrade -i gatewayopenclustermanagementio-clustergateway-editor appscode/gatewayopenclustermanagementio-clustergateway-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterGateway Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `gatewayopenclustermanagementio-clustergateway-editor`: ```bash -$ helm upgrade -i gatewayopenclustermanagementio-clustergateway-editor appscode/gatewayopenclustermanagementio-clustergateway-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayopenclustermanagementio-clustergateway-editor appscode/gatewayopenclustermanagementio-clustergateway-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterGateway Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayopencluster Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayopenclustermanagementio-clustergateway-editor appscode/gatewayopenclustermanagementio-clustergateway-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.open-cluster-management.io/v1alpha1 +$ helm upgrade -i gatewayopenclustermanagementio-clustergateway-editor appscode/gatewayopenclustermanagementio-clustergateway-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayopenclustermanagementio-clustergateway-editor appscode/gatewayopenclustermanagementio-clustergateway-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayopenclustermanagementio-clustergateway-editor appscode/gatewayopenclustermanagementio-clustergateway-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayvoyagermeshcom-kafkaroute-editor/Chart.yaml b/charts/gatewayvoyagermeshcom-kafkaroute-editor/Chart.yaml index 3719468997..1e3fe4e399 100644 --- a/charts/gatewayvoyagermeshcom-kafkaroute-editor/Chart.yaml +++ b/charts/gatewayvoyagermeshcom-kafkaroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.voyagermesh.com","version":"v1alpha1","resource":"kafkaroutes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: KafkaRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayvoyagermeshcom-kafkaroute-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayvoyagermeshcom-kafkaroute-editor/README.md b/charts/gatewayvoyagermeshcom-kafkaroute-editor/README.md index cb3826d587..d6b7e1bc3e 100644 --- a/charts/gatewayvoyagermeshcom-kafkaroute-editor/README.md +++ b/charts/gatewayvoyagermeshcom-kafkaroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayvoyagermeshcom-kafkaroute-editor --version=v0.23.0 -$ helm upgrade -i gatewayvoyagermeshcom-kafkaroute-editor appscode/gatewayvoyagermeshcom-kafkaroute-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayvoyagermeshcom-kafkaroute-editor --version=v0.24.0 +$ helm upgrade -i gatewayvoyagermeshcom-kafkaroute-editor appscode/gatewayvoyagermeshcom-kafkaroute-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KafkaRoute Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `gatewayvoyagermeshcom-kafkaroute-editor`: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-kafkaroute-editor appscode/gatewayvoyagermeshcom-kafkaroute-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayvoyagermeshcom-kafkaroute-editor appscode/gatewayvoyagermeshcom-kafkaroute-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a KafkaRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayvoyagermesh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-kafkaroute-editor appscode/gatewayvoyagermeshcom-kafkaroute-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 +$ helm upgrade -i gatewayvoyagermeshcom-kafkaroute-editor appscode/gatewayvoyagermeshcom-kafkaroute-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-kafkaroute-editor appscode/gatewayvoyagermeshcom-kafkaroute-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayvoyagermeshcom-kafkaroute-editor appscode/gatewayvoyagermeshcom-kafkaroute-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayvoyagermeshcom-mongodbroute-editor/Chart.yaml b/charts/gatewayvoyagermeshcom-mongodbroute-editor/Chart.yaml index 0e7324ac34..ff578aa776 100644 --- a/charts/gatewayvoyagermeshcom-mongodbroute-editor/Chart.yaml +++ b/charts/gatewayvoyagermeshcom-mongodbroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.voyagermesh.com","version":"v1alpha1","resource":"mongodbroutes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MongoDBRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayvoyagermeshcom-mongodbroute-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayvoyagermeshcom-mongodbroute-editor/README.md b/charts/gatewayvoyagermeshcom-mongodbroute-editor/README.md index c299addbb8..2e0499dd51 100644 --- a/charts/gatewayvoyagermeshcom-mongodbroute-editor/README.md +++ b/charts/gatewayvoyagermeshcom-mongodbroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayvoyagermeshcom-mongodbroute-editor --version=v0.23.0 -$ helm upgrade -i gatewayvoyagermeshcom-mongodbroute-editor appscode/gatewayvoyagermeshcom-mongodbroute-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayvoyagermeshcom-mongodbroute-editor --version=v0.24.0 +$ helm upgrade -i gatewayvoyagermeshcom-mongodbroute-editor appscode/gatewayvoyagermeshcom-mongodbroute-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBRoute Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `gatewayvoyagermeshcom-mongodbroute-editor`: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mongodbroute-editor appscode/gatewayvoyagermeshcom-mongodbroute-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayvoyagermeshcom-mongodbroute-editor appscode/gatewayvoyagermeshcom-mongodbroute-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MongoDBRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayvoyagermesh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mongodbroute-editor appscode/gatewayvoyagermeshcom-mongodbroute-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 +$ helm upgrade -i gatewayvoyagermeshcom-mongodbroute-editor appscode/gatewayvoyagermeshcom-mongodbroute-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mongodbroute-editor appscode/gatewayvoyagermeshcom-mongodbroute-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayvoyagermeshcom-mongodbroute-editor appscode/gatewayvoyagermeshcom-mongodbroute-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayvoyagermeshcom-mssqlserverroute-editor/Chart.yaml b/charts/gatewayvoyagermeshcom-mssqlserverroute-editor/Chart.yaml index 71b860c99d..00c3704a09 100644 --- a/charts/gatewayvoyagermeshcom-mssqlserverroute-editor/Chart.yaml +++ b/charts/gatewayvoyagermeshcom-mssqlserverroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.voyagermesh.com","version":"v1alpha1","resource":"mssqlserverroutes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLServerRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayvoyagermeshcom-mssqlserverroute-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayvoyagermeshcom-mssqlserverroute-editor/README.md b/charts/gatewayvoyagermeshcom-mssqlserverroute-editor/README.md index e9d832554d..c7e25af3d1 100644 --- a/charts/gatewayvoyagermeshcom-mssqlserverroute-editor/README.md +++ b/charts/gatewayvoyagermeshcom-mssqlserverroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayvoyagermeshcom-mssqlserverroute-editor --version=v0.23.0 -$ helm upgrade -i gatewayvoyagermeshcom-mssqlserverroute-editor appscode/gatewayvoyagermeshcom-mssqlserverroute-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayvoyagermeshcom-mssqlserverroute-editor --version=v0.24.0 +$ helm upgrade -i gatewayvoyagermeshcom-mssqlserverroute-editor appscode/gatewayvoyagermeshcom-mssqlserverroute-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerRoute Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `gatewayvoyagermeshcom-mssqlserverroute-editor`: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mssqlserverroute-editor appscode/gatewayvoyagermeshcom-mssqlserverroute-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayvoyagermeshcom-mssqlserverroute-editor appscode/gatewayvoyagermeshcom-mssqlserverroute-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLServerRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayvoyagermesh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mssqlserverroute-editor appscode/gatewayvoyagermeshcom-mssqlserverroute-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 +$ helm upgrade -i gatewayvoyagermeshcom-mssqlserverroute-editor appscode/gatewayvoyagermeshcom-mssqlserverroute-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mssqlserverroute-editor appscode/gatewayvoyagermeshcom-mssqlserverroute-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayvoyagermeshcom-mssqlserverroute-editor appscode/gatewayvoyagermeshcom-mssqlserverroute-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayvoyagermeshcom-mysqlroute-editor/Chart.yaml b/charts/gatewayvoyagermeshcom-mysqlroute-editor/Chart.yaml index c89007fa6d..9f51426856 100644 --- a/charts/gatewayvoyagermeshcom-mysqlroute-editor/Chart.yaml +++ b/charts/gatewayvoyagermeshcom-mysqlroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.voyagermesh.com","version":"v1alpha1","resource":"mysqlroutes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MySQLRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayvoyagermeshcom-mysqlroute-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayvoyagermeshcom-mysqlroute-editor/README.md b/charts/gatewayvoyagermeshcom-mysqlroute-editor/README.md index 99b8676582..1fba14658f 100644 --- a/charts/gatewayvoyagermeshcom-mysqlroute-editor/README.md +++ b/charts/gatewayvoyagermeshcom-mysqlroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayvoyagermeshcom-mysqlroute-editor --version=v0.23.0 -$ helm upgrade -i gatewayvoyagermeshcom-mysqlroute-editor appscode/gatewayvoyagermeshcom-mysqlroute-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayvoyagermeshcom-mysqlroute-editor --version=v0.24.0 +$ helm upgrade -i gatewayvoyagermeshcom-mysqlroute-editor appscode/gatewayvoyagermeshcom-mysqlroute-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLRoute Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `gatewayvoyagermeshcom-mysqlroute-editor`: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mysqlroute-editor appscode/gatewayvoyagermeshcom-mysqlroute-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayvoyagermeshcom-mysqlroute-editor appscode/gatewayvoyagermeshcom-mysqlroute-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MySQLRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayvoyagermesh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mysqlroute-editor appscode/gatewayvoyagermeshcom-mysqlroute-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 +$ helm upgrade -i gatewayvoyagermeshcom-mysqlroute-editor appscode/gatewayvoyagermeshcom-mysqlroute-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-mysqlroute-editor appscode/gatewayvoyagermeshcom-mysqlroute-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayvoyagermeshcom-mysqlroute-editor appscode/gatewayvoyagermeshcom-mysqlroute-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayvoyagermeshcom-postgresroute-editor/Chart.yaml b/charts/gatewayvoyagermeshcom-postgresroute-editor/Chart.yaml index af4b317965..6e50287b69 100644 --- a/charts/gatewayvoyagermeshcom-postgresroute-editor/Chart.yaml +++ b/charts/gatewayvoyagermeshcom-postgresroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.voyagermesh.com","version":"v1alpha1","resource":"postgresroutes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PostgresRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayvoyagermeshcom-postgresroute-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayvoyagermeshcom-postgresroute-editor/README.md b/charts/gatewayvoyagermeshcom-postgresroute-editor/README.md index de5628433b..e7ddab01c0 100644 --- a/charts/gatewayvoyagermeshcom-postgresroute-editor/README.md +++ b/charts/gatewayvoyagermeshcom-postgresroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayvoyagermeshcom-postgresroute-editor --version=v0.23.0 -$ helm upgrade -i gatewayvoyagermeshcom-postgresroute-editor appscode/gatewayvoyagermeshcom-postgresroute-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayvoyagermeshcom-postgresroute-editor --version=v0.24.0 +$ helm upgrade -i gatewayvoyagermeshcom-postgresroute-editor appscode/gatewayvoyagermeshcom-postgresroute-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresRoute Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `gatewayvoyagermeshcom-postgresroute-editor`: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-postgresroute-editor appscode/gatewayvoyagermeshcom-postgresroute-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayvoyagermeshcom-postgresroute-editor appscode/gatewayvoyagermeshcom-postgresroute-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PostgresRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayvoyagermesh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-postgresroute-editor appscode/gatewayvoyagermeshcom-postgresroute-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 +$ helm upgrade -i gatewayvoyagermeshcom-postgresroute-editor appscode/gatewayvoyagermeshcom-postgresroute-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-postgresroute-editor appscode/gatewayvoyagermeshcom-postgresroute-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayvoyagermeshcom-postgresroute-editor appscode/gatewayvoyagermeshcom-postgresroute-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gatewayvoyagermeshcom-redisroute-editor/Chart.yaml b/charts/gatewayvoyagermeshcom-redisroute-editor/Chart.yaml index 0addf3dca8..1ba40c921a 100644 --- a/charts/gatewayvoyagermeshcom-redisroute-editor/Chart.yaml +++ b/charts/gatewayvoyagermeshcom-redisroute-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gateway.voyagermesh.com","version":"v1alpha1","resource":"redisroutes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisRoute Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gatewayvoyagermeshcom-redisroute-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gatewayvoyagermeshcom-redisroute-editor/README.md b/charts/gatewayvoyagermeshcom-redisroute-editor/README.md index f207be61fc..341136400d 100644 --- a/charts/gatewayvoyagermeshcom-redisroute-editor/README.md +++ b/charts/gatewayvoyagermeshcom-redisroute-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gatewayvoyagermeshcom-redisroute-editor --version=v0.23.0 -$ helm upgrade -i gatewayvoyagermeshcom-redisroute-editor appscode/gatewayvoyagermeshcom-redisroute-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gatewayvoyagermeshcom-redisroute-editor --version=v0.24.0 +$ helm upgrade -i gatewayvoyagermeshcom-redisroute-editor appscode/gatewayvoyagermeshcom-redisroute-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisRoute Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `gatewayvoyagermeshcom-redisroute-editor`: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-redisroute-editor appscode/gatewayvoyagermeshcom-redisroute-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gatewayvoyagermeshcom-redisroute-editor appscode/gatewayvoyagermeshcom-redisroute-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisRoute Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gatewayvoyagermesh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-redisroute-editor appscode/gatewayvoyagermeshcom-redisroute-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 +$ helm upgrade -i gatewayvoyagermeshcom-redisroute-editor appscode/gatewayvoyagermeshcom-redisroute-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gateway.voyagermesh.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gatewayvoyagermeshcom-redisroute-editor appscode/gatewayvoyagermeshcom-redisroute-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gatewayvoyagermeshcom-redisroute-editor appscode/gatewayvoyagermeshcom-redisroute-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gcpkubedbcom-providerconfig-editor/Chart.yaml b/charts/gcpkubedbcom-providerconfig-editor/Chart.yaml index 97bfb1b51f..a0d71687c9 100644 --- a/charts/gcpkubedbcom-providerconfig-editor/Chart.yaml +++ b/charts/gcpkubedbcom-providerconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gcp.kubedb.com","version":"v1beta1","resource":"providerconfigs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProviderConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gcpkubedbcom-providerconfig-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gcpkubedbcom-providerconfig-editor/README.md b/charts/gcpkubedbcom-providerconfig-editor/README.md index 302fc4c967..2e88c6ab40 100644 --- a/charts/gcpkubedbcom-providerconfig-editor/README.md +++ b/charts/gcpkubedbcom-providerconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gcpkubedbcom-providerconfig-editor --version=v0.23.0 -$ helm upgrade -i gcpkubedbcom-providerconfig-editor appscode/gcpkubedbcom-providerconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gcpkubedbcom-providerconfig-editor --version=v0.24.0 +$ helm upgrade -i gcpkubedbcom-providerconfig-editor appscode/gcpkubedbcom-providerconfig-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProviderConfig Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `gcpkubedbcom-providerconfig-editor`: ```bash -$ helm upgrade -i gcpkubedbcom-providerconfig-editor appscode/gcpkubedbcom-providerconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gcpkubedbcom-providerconfig-editor appscode/gcpkubedbcom-providerconfig-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProviderConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gcpkubedbcom-provi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gcpkubedbcom-providerconfig-editor appscode/gcpkubedbcom-providerconfig-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gcp.kubedb.com/v1beta1 +$ helm upgrade -i gcpkubedbcom-providerconfig-editor appscode/gcpkubedbcom-providerconfig-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gcp.kubedb.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gcpkubedbcom-providerconfig-editor appscode/gcpkubedbcom-providerconfig-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gcpkubedbcom-providerconfig-editor appscode/gcpkubedbcom-providerconfig-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gcpkubedbcom-providerconfigusage-editor/Chart.yaml b/charts/gcpkubedbcom-providerconfigusage-editor/Chart.yaml index f8e7809944..105af3d6e3 100644 --- a/charts/gcpkubedbcom-providerconfigusage-editor/Chart.yaml +++ b/charts/gcpkubedbcom-providerconfigusage-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gcp.kubedb.com","version":"v1beta1","resource":"providerconfigusages"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProviderConfigUsage Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gcpkubedbcom-providerconfigusage-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gcpkubedbcom-providerconfigusage-editor/README.md b/charts/gcpkubedbcom-providerconfigusage-editor/README.md index 65225b0a57..b8f37b76fb 100644 --- a/charts/gcpkubedbcom-providerconfigusage-editor/README.md +++ b/charts/gcpkubedbcom-providerconfigusage-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gcpkubedbcom-providerconfigusage-editor --version=v0.23.0 -$ helm upgrade -i gcpkubedbcom-providerconfigusage-editor appscode/gcpkubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gcpkubedbcom-providerconfigusage-editor --version=v0.24.0 +$ helm upgrade -i gcpkubedbcom-providerconfigusage-editor appscode/gcpkubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProviderConfigUsage Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `gcpkubedbcom-providerconfigusage-editor`: ```bash -$ helm upgrade -i gcpkubedbcom-providerconfigusage-editor appscode/gcpkubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gcpkubedbcom-providerconfigusage-editor appscode/gcpkubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProviderConfigUsage Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gcpkubedbcom-provi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gcpkubedbcom-providerconfigusage-editor appscode/gcpkubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gcp.kubedb.com/v1beta1 +$ helm upgrade -i gcpkubedbcom-providerconfigusage-editor appscode/gcpkubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gcp.kubedb.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gcpkubedbcom-providerconfigusage-editor appscode/gcpkubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gcpkubedbcom-providerconfigusage-editor appscode/gcpkubedbcom-providerconfigusage-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gcpkubedbcom-storeconfig-editor/Chart.yaml b/charts/gcpkubedbcom-storeconfig-editor/Chart.yaml index 4963caa78c..626504ecdb 100644 --- a/charts/gcpkubedbcom-storeconfig-editor/Chart.yaml +++ b/charts/gcpkubedbcom-storeconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gcp.kubedb.com","version":"v1alpha1","resource":"storeconfigs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: StoreConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gcpkubedbcom-storeconfig-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gcpkubedbcom-storeconfig-editor/README.md b/charts/gcpkubedbcom-storeconfig-editor/README.md index e77990f652..6da78d081f 100644 --- a/charts/gcpkubedbcom-storeconfig-editor/README.md +++ b/charts/gcpkubedbcom-storeconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gcpkubedbcom-storeconfig-editor --version=v0.23.0 -$ helm upgrade -i gcpkubedbcom-storeconfig-editor appscode/gcpkubedbcom-storeconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gcpkubedbcom-storeconfig-editor --version=v0.24.0 +$ helm upgrade -i gcpkubedbcom-storeconfig-editor appscode/gcpkubedbcom-storeconfig-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a StoreConfig Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `gcpkubedbcom-storeconfig-editor`: ```bash -$ helm upgrade -i gcpkubedbcom-storeconfig-editor appscode/gcpkubedbcom-storeconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gcpkubedbcom-storeconfig-editor appscode/gcpkubedbcom-storeconfig-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a StoreConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gcpkubedbcom-store Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gcpkubedbcom-storeconfig-editor appscode/gcpkubedbcom-storeconfig-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gcp.kubedb.com/v1alpha1 +$ helm upgrade -i gcpkubedbcom-storeconfig-editor appscode/gcpkubedbcom-storeconfig-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gcpkubedbcom-storeconfig-editor appscode/gcpkubedbcom-storeconfig-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gcpkubedbcom-storeconfig-editor appscode/gcpkubedbcom-storeconfig-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-druid-editor/Chart.yaml b/charts/gitopskubedbcom-druid-editor/Chart.yaml index c95fd6185d..9331816fbf 100644 --- a/charts/gitopskubedbcom-druid-editor/Chart.yaml +++ b/charts/gitopskubedbcom-druid-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"druids"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Druid Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-druid-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-druid-editor/README.md b/charts/gitopskubedbcom-druid-editor/README.md index 7af8ff9cc9..117ff79a1b 100644 --- a/charts/gitopskubedbcom-druid-editor/README.md +++ b/charts/gitopskubedbcom-druid-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-druid-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-druid-editor appscode/gitopskubedbcom-druid-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-druid-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-druid-editor appscode/gitopskubedbcom-druid-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Druid Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `gitopskubedbcom-druid-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-druid-editor appscode/gitopskubedbcom-druid-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-druid-editor appscode/gitopskubedbcom-druid-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Druid Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-dr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-druid-editor appscode/gitopskubedbcom-druid-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-druid-editor appscode/gitopskubedbcom-druid-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-druid-editor appscode/gitopskubedbcom-druid-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-druid-editor appscode/gitopskubedbcom-druid-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-elasticsearch-editor/Chart.yaml b/charts/gitopskubedbcom-elasticsearch-editor/Chart.yaml index a71e2e2416..9ce0135178 100644 --- a/charts/gitopskubedbcom-elasticsearch-editor/Chart.yaml +++ b/charts/gitopskubedbcom-elasticsearch-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"elasticsearches"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Elasticsearch Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-elasticsearch-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-elasticsearch-editor/README.md b/charts/gitopskubedbcom-elasticsearch-editor/README.md index 8fac240b8a..ed5339711e 100644 --- a/charts/gitopskubedbcom-elasticsearch-editor/README.md +++ b/charts/gitopskubedbcom-elasticsearch-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-elasticsearch-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-elasticsearch-editor appscode/gitopskubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-elasticsearch-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-elasticsearch-editor appscode/gitopskubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Elasticsearch Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `gitopskubedbcom-elasticsearch-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-elasticsearch-editor appscode/gitopskubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-elasticsearch-editor appscode/gitopskubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Elasticsearch Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-el Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-elasticsearch-editor appscode/gitopskubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-elasticsearch-editor appscode/gitopskubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-elasticsearch-editor appscode/gitopskubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-elasticsearch-editor appscode/gitopskubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-ferretdb-editor/Chart.yaml b/charts/gitopskubedbcom-ferretdb-editor/Chart.yaml index 96d7bb09b1..6cd1a87aae 100644 --- a/charts/gitopskubedbcom-ferretdb-editor/Chart.yaml +++ b/charts/gitopskubedbcom-ferretdb-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"ferretdbs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FerretDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-ferretdb-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-ferretdb-editor/README.md b/charts/gitopskubedbcom-ferretdb-editor/README.md index 5838aa0cef..6bfdc1e061 100644 --- a/charts/gitopskubedbcom-ferretdb-editor/README.md +++ b/charts/gitopskubedbcom-ferretdb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-ferretdb-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-ferretdb-editor appscode/gitopskubedbcom-ferretdb-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-ferretdb-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-ferretdb-editor appscode/gitopskubedbcom-ferretdb-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FerretDB Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `gitopskubedbcom-ferretdb-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-ferretdb-editor appscode/gitopskubedbcom-ferretdb-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-ferretdb-editor appscode/gitopskubedbcom-ferretdb-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FerretDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-fe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-ferretdb-editor appscode/gitopskubedbcom-ferretdb-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-ferretdb-editor appscode/gitopskubedbcom-ferretdb-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-ferretdb-editor appscode/gitopskubedbcom-ferretdb-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-ferretdb-editor appscode/gitopskubedbcom-ferretdb-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-kafka-editor/Chart.yaml b/charts/gitopskubedbcom-kafka-editor/Chart.yaml index 5643503e0b..df3cef4588 100644 --- a/charts/gitopskubedbcom-kafka-editor/Chart.yaml +++ b/charts/gitopskubedbcom-kafka-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"kafkas"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Kafka Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-kafka-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-kafka-editor/README.md b/charts/gitopskubedbcom-kafka-editor/README.md index 96ff27d208..e17d986000 100644 --- a/charts/gitopskubedbcom-kafka-editor/README.md +++ b/charts/gitopskubedbcom-kafka-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-kafka-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-kafka-editor appscode/gitopskubedbcom-kafka-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-kafka-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-kafka-editor appscode/gitopskubedbcom-kafka-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Kafka Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `gitopskubedbcom-kafka-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-kafka-editor appscode/gitopskubedbcom-kafka-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-kafka-editor appscode/gitopskubedbcom-kafka-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Kafka Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-ka Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-kafka-editor appscode/gitopskubedbcom-kafka-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-kafka-editor appscode/gitopskubedbcom-kafka-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-kafka-editor appscode/gitopskubedbcom-kafka-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-kafka-editor appscode/gitopskubedbcom-kafka-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-mariadb-editor/Chart.yaml b/charts/gitopskubedbcom-mariadb-editor/Chart.yaml index 870c89284b..cdc2388df2 100644 --- a/charts/gitopskubedbcom-mariadb-editor/Chart.yaml +++ b/charts/gitopskubedbcom-mariadb-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"mariadbs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MariaDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-mariadb-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-mariadb-editor/README.md b/charts/gitopskubedbcom-mariadb-editor/README.md index fc6d4e9aca..0a3f1f560b 100644 --- a/charts/gitopskubedbcom-mariadb-editor/README.md +++ b/charts/gitopskubedbcom-mariadb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-mariadb-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-mariadb-editor appscode/gitopskubedbcom-mariadb-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-mariadb-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-mariadb-editor appscode/gitopskubedbcom-mariadb-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDB Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `gitopskubedbcom-mariadb-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-mariadb-editor appscode/gitopskubedbcom-mariadb-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-mariadb-editor appscode/gitopskubedbcom-mariadb-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MariaDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-ma Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-mariadb-editor appscode/gitopskubedbcom-mariadb-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-mariadb-editor appscode/gitopskubedbcom-mariadb-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-mariadb-editor appscode/gitopskubedbcom-mariadb-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-mariadb-editor appscode/gitopskubedbcom-mariadb-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-memcached-editor/Chart.yaml b/charts/gitopskubedbcom-memcached-editor/Chart.yaml index 0e1ea2e275..34d11985e7 100644 --- a/charts/gitopskubedbcom-memcached-editor/Chart.yaml +++ b/charts/gitopskubedbcom-memcached-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"memcacheds"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Memcached Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-memcached-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-memcached-editor/README.md b/charts/gitopskubedbcom-memcached-editor/README.md index 8d51aee46e..2b2913fa87 100644 --- a/charts/gitopskubedbcom-memcached-editor/README.md +++ b/charts/gitopskubedbcom-memcached-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-memcached-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-memcached-editor appscode/gitopskubedbcom-memcached-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-memcached-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-memcached-editor appscode/gitopskubedbcom-memcached-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Memcached Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `gitopskubedbcom-memcached-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-memcached-editor appscode/gitopskubedbcom-memcached-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-memcached-editor appscode/gitopskubedbcom-memcached-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Memcached Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-me Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-memcached-editor appscode/gitopskubedbcom-memcached-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-memcached-editor appscode/gitopskubedbcom-memcached-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-memcached-editor appscode/gitopskubedbcom-memcached-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-memcached-editor appscode/gitopskubedbcom-memcached-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-mongodb-editor/Chart.yaml b/charts/gitopskubedbcom-mongodb-editor/Chart.yaml index ee6a69c9ee..0457526134 100644 --- a/charts/gitopskubedbcom-mongodb-editor/Chart.yaml +++ b/charts/gitopskubedbcom-mongodb-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"mongodbs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MongoDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-mongodb-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-mongodb-editor/README.md b/charts/gitopskubedbcom-mongodb-editor/README.md index c3762b9d19..febdc5a8a7 100644 --- a/charts/gitopskubedbcom-mongodb-editor/README.md +++ b/charts/gitopskubedbcom-mongodb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-mongodb-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-mongodb-editor appscode/gitopskubedbcom-mongodb-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-mongodb-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-mongodb-editor appscode/gitopskubedbcom-mongodb-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDB Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `gitopskubedbcom-mongodb-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-mongodb-editor appscode/gitopskubedbcom-mongodb-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-mongodb-editor appscode/gitopskubedbcom-mongodb-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MongoDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-mo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-mongodb-editor appscode/gitopskubedbcom-mongodb-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-mongodb-editor appscode/gitopskubedbcom-mongodb-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-mongodb-editor appscode/gitopskubedbcom-mongodb-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-mongodb-editor appscode/gitopskubedbcom-mongodb-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-mssqlserver-editor/Chart.yaml b/charts/gitopskubedbcom-mssqlserver-editor/Chart.yaml index f607127984..4340483c49 100644 --- a/charts/gitopskubedbcom-mssqlserver-editor/Chart.yaml +++ b/charts/gitopskubedbcom-mssqlserver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"mssqlservers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLServer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-mssqlserver-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-mssqlserver-editor/README.md b/charts/gitopskubedbcom-mssqlserver-editor/README.md index ab0a3ee3b5..22db275bcb 100644 --- a/charts/gitopskubedbcom-mssqlserver-editor/README.md +++ b/charts/gitopskubedbcom-mssqlserver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-mssqlserver-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-mssqlserver-editor appscode/gitopskubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-mssqlserver-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-mssqlserver-editor appscode/gitopskubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServer Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `gitopskubedbcom-mssqlserver-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-mssqlserver-editor appscode/gitopskubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-mssqlserver-editor appscode/gitopskubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLServer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-ms Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-mssqlserver-editor appscode/gitopskubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-mssqlserver-editor appscode/gitopskubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-mssqlserver-editor appscode/gitopskubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-mssqlserver-editor appscode/gitopskubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-mysql-editor/Chart.yaml b/charts/gitopskubedbcom-mysql-editor/Chart.yaml index 1bbc9ebdb6..8bb1c8bc34 100644 --- a/charts/gitopskubedbcom-mysql-editor/Chart.yaml +++ b/charts/gitopskubedbcom-mysql-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"mysqls"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MySQL Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-mysql-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-mysql-editor/README.md b/charts/gitopskubedbcom-mysql-editor/README.md index 15af504c26..337505a0c4 100644 --- a/charts/gitopskubedbcom-mysql-editor/README.md +++ b/charts/gitopskubedbcom-mysql-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-mysql-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-mysql-editor appscode/gitopskubedbcom-mysql-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-mysql-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-mysql-editor appscode/gitopskubedbcom-mysql-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQL Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `gitopskubedbcom-mysql-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-mysql-editor appscode/gitopskubedbcom-mysql-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-mysql-editor appscode/gitopskubedbcom-mysql-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MySQL Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-my Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-mysql-editor appscode/gitopskubedbcom-mysql-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-mysql-editor appscode/gitopskubedbcom-mysql-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-mysql-editor appscode/gitopskubedbcom-mysql-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-mysql-editor appscode/gitopskubedbcom-mysql-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-perconaxtradb-editor/Chart.yaml b/charts/gitopskubedbcom-perconaxtradb-editor/Chart.yaml index 9bd10bf70f..1c564a2794 100644 --- a/charts/gitopskubedbcom-perconaxtradb-editor/Chart.yaml +++ b/charts/gitopskubedbcom-perconaxtradb-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"perconaxtradbs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PerconaXtraDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-perconaxtradb-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-perconaxtradb-editor/README.md b/charts/gitopskubedbcom-perconaxtradb-editor/README.md index bf53a5d208..6a1c58c9fa 100644 --- a/charts/gitopskubedbcom-perconaxtradb-editor/README.md +++ b/charts/gitopskubedbcom-perconaxtradb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-perconaxtradb-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-perconaxtradb-editor appscode/gitopskubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-perconaxtradb-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-perconaxtradb-editor appscode/gitopskubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PerconaXtraDB Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `gitopskubedbcom-perconaxtradb-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-perconaxtradb-editor appscode/gitopskubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-perconaxtradb-editor appscode/gitopskubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PerconaXtraDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-pe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-perconaxtradb-editor appscode/gitopskubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-perconaxtradb-editor appscode/gitopskubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-perconaxtradb-editor appscode/gitopskubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-perconaxtradb-editor appscode/gitopskubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-pgbouncer-editor/Chart.yaml b/charts/gitopskubedbcom-pgbouncer-editor/Chart.yaml index eb7b0fac08..20c385dc08 100644 --- a/charts/gitopskubedbcom-pgbouncer-editor/Chart.yaml +++ b/charts/gitopskubedbcom-pgbouncer-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"pgbouncers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PgBouncer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-pgbouncer-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-pgbouncer-editor/README.md b/charts/gitopskubedbcom-pgbouncer-editor/README.md index aeb459c2b5..8e9fe55142 100644 --- a/charts/gitopskubedbcom-pgbouncer-editor/README.md +++ b/charts/gitopskubedbcom-pgbouncer-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-pgbouncer-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-pgbouncer-editor appscode/gitopskubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-pgbouncer-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-pgbouncer-editor appscode/gitopskubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncer Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `gitopskubedbcom-pgbouncer-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-pgbouncer-editor appscode/gitopskubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-pgbouncer-editor appscode/gitopskubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PgBouncer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-pg Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-pgbouncer-editor appscode/gitopskubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-pgbouncer-editor appscode/gitopskubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-pgbouncer-editor appscode/gitopskubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-pgbouncer-editor appscode/gitopskubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-pgpool-editor/Chart.yaml b/charts/gitopskubedbcom-pgpool-editor/Chart.yaml index 7dfee79ccd..6558e01d75 100644 --- a/charts/gitopskubedbcom-pgpool-editor/Chart.yaml +++ b/charts/gitopskubedbcom-pgpool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"pgpools"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Pgpool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-pgpool-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-pgpool-editor/README.md b/charts/gitopskubedbcom-pgpool-editor/README.md index 0e39bc39a8..bedbc4c9a9 100644 --- a/charts/gitopskubedbcom-pgpool-editor/README.md +++ b/charts/gitopskubedbcom-pgpool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-pgpool-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-pgpool-editor appscode/gitopskubedbcom-pgpool-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-pgpool-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-pgpool-editor appscode/gitopskubedbcom-pgpool-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Pgpool Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `gitopskubedbcom-pgpool-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-pgpool-editor appscode/gitopskubedbcom-pgpool-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-pgpool-editor appscode/gitopskubedbcom-pgpool-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Pgpool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-pg Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-pgpool-editor appscode/gitopskubedbcom-pgpool-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-pgpool-editor appscode/gitopskubedbcom-pgpool-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-pgpool-editor appscode/gitopskubedbcom-pgpool-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-pgpool-editor appscode/gitopskubedbcom-pgpool-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-postgres-editor/Chart.yaml b/charts/gitopskubedbcom-postgres-editor/Chart.yaml index 2d920769cf..c37d67a36b 100644 --- a/charts/gitopskubedbcom-postgres-editor/Chart.yaml +++ b/charts/gitopskubedbcom-postgres-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"postgreses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Postgres Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-postgres-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-postgres-editor/README.md b/charts/gitopskubedbcom-postgres-editor/README.md index e62fe36c03..99bce93476 100644 --- a/charts/gitopskubedbcom-postgres-editor/README.md +++ b/charts/gitopskubedbcom-postgres-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-postgres-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-postgres-editor appscode/gitopskubedbcom-postgres-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-postgres-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-postgres-editor appscode/gitopskubedbcom-postgres-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Postgres Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `gitopskubedbcom-postgres-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-postgres-editor appscode/gitopskubedbcom-postgres-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-postgres-editor appscode/gitopskubedbcom-postgres-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Postgres Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-po Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-postgres-editor appscode/gitopskubedbcom-postgres-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-postgres-editor appscode/gitopskubedbcom-postgres-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-postgres-editor appscode/gitopskubedbcom-postgres-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-postgres-editor appscode/gitopskubedbcom-postgres-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-proxysql-editor/Chart.yaml b/charts/gitopskubedbcom-proxysql-editor/Chart.yaml index 0999a905fe..f25ee1d96f 100644 --- a/charts/gitopskubedbcom-proxysql-editor/Chart.yaml +++ b/charts/gitopskubedbcom-proxysql-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"proxysqls"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProxySQL Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-proxysql-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-proxysql-editor/README.md b/charts/gitopskubedbcom-proxysql-editor/README.md index a09a581348..8b48265fac 100644 --- a/charts/gitopskubedbcom-proxysql-editor/README.md +++ b/charts/gitopskubedbcom-proxysql-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-proxysql-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-proxysql-editor appscode/gitopskubedbcom-proxysql-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-proxysql-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-proxysql-editor appscode/gitopskubedbcom-proxysql-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQL Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `gitopskubedbcom-proxysql-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-proxysql-editor appscode/gitopskubedbcom-proxysql-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-proxysql-editor appscode/gitopskubedbcom-proxysql-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProxySQL Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-pr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-proxysql-editor appscode/gitopskubedbcom-proxysql-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-proxysql-editor appscode/gitopskubedbcom-proxysql-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-proxysql-editor appscode/gitopskubedbcom-proxysql-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-proxysql-editor appscode/gitopskubedbcom-proxysql-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-rabbitmq-editor/Chart.yaml b/charts/gitopskubedbcom-rabbitmq-editor/Chart.yaml index 67d595c1fc..dc3489941b 100644 --- a/charts/gitopskubedbcom-rabbitmq-editor/Chart.yaml +++ b/charts/gitopskubedbcom-rabbitmq-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"rabbitmqs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RabbitMQ Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-rabbitmq-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-rabbitmq-editor/README.md b/charts/gitopskubedbcom-rabbitmq-editor/README.md index 96b42e3c6d..e428469db2 100644 --- a/charts/gitopskubedbcom-rabbitmq-editor/README.md +++ b/charts/gitopskubedbcom-rabbitmq-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-rabbitmq-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-rabbitmq-editor appscode/gitopskubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-rabbitmq-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-rabbitmq-editor appscode/gitopskubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RabbitMQ Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `gitopskubedbcom-rabbitmq-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-rabbitmq-editor appscode/gitopskubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-rabbitmq-editor appscode/gitopskubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RabbitMQ Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-ra Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-rabbitmq-editor appscode/gitopskubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-rabbitmq-editor appscode/gitopskubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-rabbitmq-editor appscode/gitopskubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-rabbitmq-editor appscode/gitopskubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-redis-editor/Chart.yaml b/charts/gitopskubedbcom-redis-editor/Chart.yaml index 1f7c833c95..fdea07c4a4 100644 --- a/charts/gitopskubedbcom-redis-editor/Chart.yaml +++ b/charts/gitopskubedbcom-redis-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"redises"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Redis Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-redis-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-redis-editor/README.md b/charts/gitopskubedbcom-redis-editor/README.md index 14768f3587..8ba97bc1b4 100644 --- a/charts/gitopskubedbcom-redis-editor/README.md +++ b/charts/gitopskubedbcom-redis-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-redis-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-redis-editor appscode/gitopskubedbcom-redis-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-redis-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-redis-editor appscode/gitopskubedbcom-redis-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Redis Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `gitopskubedbcom-redis-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-redis-editor appscode/gitopskubedbcom-redis-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-redis-editor appscode/gitopskubedbcom-redis-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Redis Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-re Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-redis-editor appscode/gitopskubedbcom-redis-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-redis-editor appscode/gitopskubedbcom-redis-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-redis-editor appscode/gitopskubedbcom-redis-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-redis-editor appscode/gitopskubedbcom-redis-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-redissentinel-editor/Chart.yaml b/charts/gitopskubedbcom-redissentinel-editor/Chart.yaml index 909f1c7133..defceb713f 100644 --- a/charts/gitopskubedbcom-redissentinel-editor/Chart.yaml +++ b/charts/gitopskubedbcom-redissentinel-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"redissentinels"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisSentinel Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-redissentinel-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-redissentinel-editor/README.md b/charts/gitopskubedbcom-redissentinel-editor/README.md index f8a0a9e0cf..03d8d4e7f7 100644 --- a/charts/gitopskubedbcom-redissentinel-editor/README.md +++ b/charts/gitopskubedbcom-redissentinel-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-redissentinel-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-redissentinel-editor appscode/gitopskubedbcom-redissentinel-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-redissentinel-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-redissentinel-editor appscode/gitopskubedbcom-redissentinel-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisSentinel Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `gitopskubedbcom-redissentinel-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-redissentinel-editor appscode/gitopskubedbcom-redissentinel-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-redissentinel-editor appscode/gitopskubedbcom-redissentinel-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisSentinel Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-re Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-redissentinel-editor appscode/gitopskubedbcom-redissentinel-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-redissentinel-editor appscode/gitopskubedbcom-redissentinel-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-redissentinel-editor appscode/gitopskubedbcom-redissentinel-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-redissentinel-editor appscode/gitopskubedbcom-redissentinel-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-singlestore-editor/Chart.yaml b/charts/gitopskubedbcom-singlestore-editor/Chart.yaml index 1ed4ae4734..529ea896c2 100644 --- a/charts/gitopskubedbcom-singlestore-editor/Chart.yaml +++ b/charts/gitopskubedbcom-singlestore-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"singlestores"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Singlestore Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-singlestore-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-singlestore-editor/README.md b/charts/gitopskubedbcom-singlestore-editor/README.md index 5f296e7c61..14f54a2ed9 100644 --- a/charts/gitopskubedbcom-singlestore-editor/README.md +++ b/charts/gitopskubedbcom-singlestore-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-singlestore-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-singlestore-editor appscode/gitopskubedbcom-singlestore-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-singlestore-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-singlestore-editor appscode/gitopskubedbcom-singlestore-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Singlestore Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `gitopskubedbcom-singlestore-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-singlestore-editor appscode/gitopskubedbcom-singlestore-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-singlestore-editor appscode/gitopskubedbcom-singlestore-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Singlestore Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-si Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-singlestore-editor appscode/gitopskubedbcom-singlestore-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-singlestore-editor appscode/gitopskubedbcom-singlestore-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-singlestore-editor appscode/gitopskubedbcom-singlestore-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-singlestore-editor appscode/gitopskubedbcom-singlestore-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-solr-editor/Chart.yaml b/charts/gitopskubedbcom-solr-editor/Chart.yaml index 7173a8aa8d..a19005eec8 100644 --- a/charts/gitopskubedbcom-solr-editor/Chart.yaml +++ b/charts/gitopskubedbcom-solr-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"solrs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Solr Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-solr-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-solr-editor/README.md b/charts/gitopskubedbcom-solr-editor/README.md index d613112066..81252b5738 100644 --- a/charts/gitopskubedbcom-solr-editor/README.md +++ b/charts/gitopskubedbcom-solr-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-solr-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-solr-editor appscode/gitopskubedbcom-solr-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-solr-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-solr-editor appscode/gitopskubedbcom-solr-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Solr Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `gitopskubedbcom-solr-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-solr-editor appscode/gitopskubedbcom-solr-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-solr-editor appscode/gitopskubedbcom-solr-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Solr Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-so Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-solr-editor appscode/gitopskubedbcom-solr-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-solr-editor appscode/gitopskubedbcom-solr-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-solr-editor appscode/gitopskubedbcom-solr-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-solr-editor appscode/gitopskubedbcom-solr-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/gitopskubedbcom-zookeeper-editor/Chart.yaml b/charts/gitopskubedbcom-zookeeper-editor/Chart.yaml index 101707defd..0277e9eb04 100644 --- a/charts/gitopskubedbcom-zookeeper-editor/Chart.yaml +++ b/charts/gitopskubedbcom-zookeeper-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"gitops.kubedb.com","version":"v1alpha1","resource":"zookeepers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ZooKeeper Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: gitopskubedbcom-zookeeper-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/gitopskubedbcom-zookeeper-editor/README.md b/charts/gitopskubedbcom-zookeeper-editor/README.md index f3ef154e51..965904f3fa 100644 --- a/charts/gitopskubedbcom-zookeeper-editor/README.md +++ b/charts/gitopskubedbcom-zookeeper-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/gitopskubedbcom-zookeeper-editor --version=v0.23.0 -$ helm upgrade -i gitopskubedbcom-zookeeper-editor appscode/gitopskubedbcom-zookeeper-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/gitopskubedbcom-zookeeper-editor --version=v0.24.0 +$ helm upgrade -i gitopskubedbcom-zookeeper-editor appscode/gitopskubedbcom-zookeeper-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ZooKeeper Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `gitopskubedbcom-zookeeper-editor`: ```bash -$ helm upgrade -i gitopskubedbcom-zookeeper-editor appscode/gitopskubedbcom-zookeeper-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i gitopskubedbcom-zookeeper-editor appscode/gitopskubedbcom-zookeeper-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ZooKeeper Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `gitopskubedbcom-zo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i gitopskubedbcom-zookeeper-editor appscode/gitopskubedbcom-zookeeper-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=gitops.kubedb.com/v1alpha1 +$ helm upgrade -i gitopskubedbcom-zookeeper-editor appscode/gitopskubedbcom-zookeeper-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=gitops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i gitopskubedbcom-zookeeper-editor appscode/gitopskubedbcom-zookeeper-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i gitopskubedbcom-zookeeper-editor appscode/gitopskubedbcom-zookeeper-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/grafanasearchlightdev-dashboard-editor/Chart.yaml b/charts/grafanasearchlightdev-dashboard-editor/Chart.yaml index 559bdd49ef..bbfae32c58 100644 --- a/charts/grafanasearchlightdev-dashboard-editor/Chart.yaml +++ b/charts/grafanasearchlightdev-dashboard-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"grafana.searchlight.dev","version":"v1alpha1","resource":"dashboards"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Dashboard Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: grafanasearchlightdev-dashboard-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/grafanasearchlightdev-dashboard-editor/README.md b/charts/grafanasearchlightdev-dashboard-editor/README.md index 6ec75e2965..b961be69ff 100644 --- a/charts/grafanasearchlightdev-dashboard-editor/README.md +++ b/charts/grafanasearchlightdev-dashboard-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/grafanasearchlightdev-dashboard-editor --version=v0.23.0 -$ helm upgrade -i grafanasearchlightdev-dashboard-editor appscode/grafanasearchlightdev-dashboard-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/grafanasearchlightdev-dashboard-editor --version=v0.24.0 +$ helm upgrade -i grafanasearchlightdev-dashboard-editor appscode/grafanasearchlightdev-dashboard-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Dashboard Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `grafanasearchlightdev-dashboard-editor`: ```bash -$ helm upgrade -i grafanasearchlightdev-dashboard-editor appscode/grafanasearchlightdev-dashboard-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i grafanasearchlightdev-dashboard-editor appscode/grafanasearchlightdev-dashboard-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Dashboard Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `grafanasearchlight Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i grafanasearchlightdev-dashboard-editor appscode/grafanasearchlightdev-dashboard-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=grafana.searchlight.dev/v1alpha1 +$ helm upgrade -i grafanasearchlightdev-dashboard-editor appscode/grafanasearchlightdev-dashboard-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=grafana.searchlight.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i grafanasearchlightdev-dashboard-editor appscode/grafanasearchlightdev-dashboard-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i grafanasearchlightdev-dashboard-editor appscode/grafanasearchlightdev-dashboard-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/grafanasearchlightdev-dashboardtemplate-editor/Chart.yaml b/charts/grafanasearchlightdev-dashboardtemplate-editor/Chart.yaml index da2fccca82..4b432504d7 100644 --- a/charts/grafanasearchlightdev-dashboardtemplate-editor/Chart.yaml +++ b/charts/grafanasearchlightdev-dashboardtemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"grafana.searchlight.dev","version":"v1alpha1","resource":"dashboardtemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: DashboardTemplate Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: grafanasearchlightdev-dashboardtemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/grafanasearchlightdev-dashboardtemplate-editor/README.md b/charts/grafanasearchlightdev-dashboardtemplate-editor/README.md index 5c4db30b90..55ea1477d8 100644 --- a/charts/grafanasearchlightdev-dashboardtemplate-editor/README.md +++ b/charts/grafanasearchlightdev-dashboardtemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/grafanasearchlightdev-dashboardtemplate-editor --version=v0.23.0 -$ helm upgrade -i grafanasearchlightdev-dashboardtemplate-editor appscode/grafanasearchlightdev-dashboardtemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/grafanasearchlightdev-dashboardtemplate-editor --version=v0.24.0 +$ helm upgrade -i grafanasearchlightdev-dashboardtemplate-editor appscode/grafanasearchlightdev-dashboardtemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DashboardTemplate Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `grafanasearchlightdev-dashboardtemplate-editor`: ```bash -$ helm upgrade -i grafanasearchlightdev-dashboardtemplate-editor appscode/grafanasearchlightdev-dashboardtemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i grafanasearchlightdev-dashboardtemplate-editor appscode/grafanasearchlightdev-dashboardtemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a DashboardTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -55,12 +55,12 @@ The following table lists the configurable parameters of the `grafanasearchlight Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i grafanasearchlightdev-dashboardtemplate-editor appscode/grafanasearchlightdev-dashboardtemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=grafana.searchlight.dev/v1alpha1 +$ helm upgrade -i grafanasearchlightdev-dashboardtemplate-editor appscode/grafanasearchlightdev-dashboardtemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=grafana.searchlight.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i grafanasearchlightdev-dashboardtemplate-editor appscode/grafanasearchlightdev-dashboardtemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i grafanasearchlightdev-dashboardtemplate-editor appscode/grafanasearchlightdev-dashboardtemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/grafanasearchlightdev-datasource-editor/Chart.yaml b/charts/grafanasearchlightdev-datasource-editor/Chart.yaml index 407ed4c63b..3720a27f6f 100644 --- a/charts/grafanasearchlightdev-datasource-editor/Chart.yaml +++ b/charts/grafanasearchlightdev-datasource-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"grafana.searchlight.dev","version":"v1alpha1","resource":"datasources"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Datasource Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: grafanasearchlightdev-datasource-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/grafanasearchlightdev-datasource-editor/README.md b/charts/grafanasearchlightdev-datasource-editor/README.md index abf68b2bd4..e22a2159f1 100644 --- a/charts/grafanasearchlightdev-datasource-editor/README.md +++ b/charts/grafanasearchlightdev-datasource-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/grafanasearchlightdev-datasource-editor --version=v0.23.0 -$ helm upgrade -i grafanasearchlightdev-datasource-editor appscode/grafanasearchlightdev-datasource-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/grafanasearchlightdev-datasource-editor --version=v0.24.0 +$ helm upgrade -i grafanasearchlightdev-datasource-editor appscode/grafanasearchlightdev-datasource-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Datasource Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `grafanasearchlightdev-datasource-editor`: ```bash -$ helm upgrade -i grafanasearchlightdev-datasource-editor appscode/grafanasearchlightdev-datasource-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i grafanasearchlightdev-datasource-editor appscode/grafanasearchlightdev-datasource-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Datasource Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `grafanasearchlight Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i grafanasearchlightdev-datasource-editor appscode/grafanasearchlightdev-datasource-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=grafana.searchlight.dev/v1alpha1 +$ helm upgrade -i grafanasearchlightdev-datasource-editor appscode/grafanasearchlightdev-datasource-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=grafana.searchlight.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i grafanasearchlightdev-datasource-editor appscode/grafanasearchlightdev-datasource-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i grafanasearchlightdev-datasource-editor appscode/grafanasearchlightdev-datasource-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/helmtoolkitfluxcdio-helmrelease-editor/Chart.yaml b/charts/helmtoolkitfluxcdio-helmrelease-editor/Chart.yaml index c8b20bdf67..cc17fcce62 100644 --- a/charts/helmtoolkitfluxcdio-helmrelease-editor/Chart.yaml +++ b/charts/helmtoolkitfluxcdio-helmrelease-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"helm.toolkit.fluxcd.io","version":"v2","resource":"helmreleases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: HelmRelease Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: helmtoolkitfluxcdio-helmrelease-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/helmtoolkitfluxcdio-helmrelease-editor/README.md b/charts/helmtoolkitfluxcdio-helmrelease-editor/README.md index ab1574addd..eebd8f46e0 100644 --- a/charts/helmtoolkitfluxcdio-helmrelease-editor/README.md +++ b/charts/helmtoolkitfluxcdio-helmrelease-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/helmtoolkitfluxcdio-helmrelease-editor --version=v0.23.0 -$ helm upgrade -i helmtoolkitfluxcdio-helmrelease-editor appscode/helmtoolkitfluxcdio-helmrelease-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/helmtoolkitfluxcdio-helmrelease-editor --version=v0.24.0 +$ helm upgrade -i helmtoolkitfluxcdio-helmrelease-editor appscode/helmtoolkitfluxcdio-helmrelease-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HelmRelease Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `helmtoolkitfluxcdio-helmrelease-editor`: ```bash -$ helm upgrade -i helmtoolkitfluxcdio-helmrelease-editor appscode/helmtoolkitfluxcdio-helmrelease-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i helmtoolkitfluxcdio-helmrelease-editor appscode/helmtoolkitfluxcdio-helmrelease-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a HelmRelease Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `helmtoolkitfluxcdi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i helmtoolkitfluxcdio-helmrelease-editor appscode/helmtoolkitfluxcdio-helmrelease-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=helm.toolkit.fluxcd.io/v2 +$ helm upgrade -i helmtoolkitfluxcdio-helmrelease-editor appscode/helmtoolkitfluxcdio-helmrelease-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=helm.toolkit.fluxcd.io/v2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i helmtoolkitfluxcdio-helmrelease-editor appscode/helmtoolkitfluxcdio-helmrelease-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i helmtoolkitfluxcdio-helmrelease-editor appscode/helmtoolkitfluxcdio-helmrelease-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/iamawskubedbcom-role-editor/Chart.yaml b/charts/iamawskubedbcom-role-editor/Chart.yaml index dd4f656286..4a8c6746f0 100644 --- a/charts/iamawskubedbcom-role-editor/Chart.yaml +++ b/charts/iamawskubedbcom-role-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"iam.aws.kubedb.com","version":"v1alpha1","resource":"roles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Role Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: iamawskubedbcom-role-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/iamawskubedbcom-role-editor/README.md b/charts/iamawskubedbcom-role-editor/README.md index 1e1bffac40..585f888a0a 100644 --- a/charts/iamawskubedbcom-role-editor/README.md +++ b/charts/iamawskubedbcom-role-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/iamawskubedbcom-role-editor --version=v0.23.0 -$ helm upgrade -i iamawskubedbcom-role-editor appscode/iamawskubedbcom-role-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/iamawskubedbcom-role-editor --version=v0.24.0 +$ helm upgrade -i iamawskubedbcom-role-editor appscode/iamawskubedbcom-role-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Role Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `iamawskubedbcom-role-editor`: ```bash -$ helm upgrade -i iamawskubedbcom-role-editor appscode/iamawskubedbcom-role-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i iamawskubedbcom-role-editor appscode/iamawskubedbcom-role-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Role Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `iamawskubedbcom-ro Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i iamawskubedbcom-role-editor appscode/iamawskubedbcom-role-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=iam.aws.kubedb.com/v1alpha1 +$ helm upgrade -i iamawskubedbcom-role-editor appscode/iamawskubedbcom-role-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=iam.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i iamawskubedbcom-role-editor appscode/iamawskubedbcom-role-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i iamawskubedbcom-role-editor appscode/iamawskubedbcom-role-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/identityk8sappscodecom-clusteridentity-editor/Chart.yaml b/charts/identityk8sappscodecom-clusteridentity-editor/Chart.yaml index 37bb92a50a..652ccd43ef 100644 --- a/charts/identityk8sappscodecom-clusteridentity-editor/Chart.yaml +++ b/charts/identityk8sappscodecom-clusteridentity-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"identity.k8s.appscode.com","version":"v1alpha1","resource":"clusteridentitys"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterIdentity Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: identityk8sappscodecom-clusteridentity-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/identityk8sappscodecom-clusteridentity-editor/README.md b/charts/identityk8sappscodecom-clusteridentity-editor/README.md index 3a836a08c0..aeb013ce8d 100644 --- a/charts/identityk8sappscodecom-clusteridentity-editor/README.md +++ b/charts/identityk8sappscodecom-clusteridentity-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/identityk8sappscodecom-clusteridentity-editor --version=v0.23.0 -$ helm upgrade -i identityk8sappscodecom-clusteridentity-editor appscode/identityk8sappscodecom-clusteridentity-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/identityk8sappscodecom-clusteridentity-editor --version=v0.24.0 +$ helm upgrade -i identityk8sappscodecom-clusteridentity-editor appscode/identityk8sappscodecom-clusteridentity-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterIdentity Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `identityk8sappscodecom-clusteridentity-editor`: ```bash -$ helm upgrade -i identityk8sappscodecom-clusteridentity-editor appscode/identityk8sappscodecom-clusteridentity-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i identityk8sappscodecom-clusteridentity-editor appscode/identityk8sappscodecom-clusteridentity-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterIdentity Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `identityk8sappscod Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i identityk8sappscodecom-clusteridentity-editor appscode/identityk8sappscodecom-clusteridentity-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=identity.k8s.appscode.com/v1alpha1 +$ helm upgrade -i identityk8sappscodecom-clusteridentity-editor appscode/identityk8sappscodecom-clusteridentity-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=identity.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i identityk8sappscodecom-clusteridentity-editor appscode/identityk8sappscodecom-clusteridentity-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i identityk8sappscodecom-clusteridentity-editor appscode/identityk8sappscodecom-clusteridentity-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor/Chart.yaml b/charts/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor/Chart.yaml index d384991ba8..a276c39bf5 100644 --- a/charts/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor/Chart.yaml +++ b/charts/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"identity.k8s.appscode.com","version":"v1alpha1","resource":"selfsubjectnamespaceaccessreviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SelfSubjectNamespaceAccessReview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor/README.md b/charts/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor/README.md index bd39ab0a64..44d4578c3e 100644 --- a/charts/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor/README.md +++ b/charts/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor --version=v0.23.0 -$ helm upgrade -i identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor --version=v0.24.0 +$ helm upgrade -i identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SelfSubjectNamespaceAccessReview Editor on a [Kubernetes](h To install/upgrade the chart with the release name `identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor`: ```bash -$ helm upgrade -i identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SelfSubjectNamespaceAccessReview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `identityk8sappscod Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=identity.k8s.appscode.com/v1alpha1 +$ helm upgrade -i identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=identity.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor appscode/identityk8sappscodecom-selfsubjectnamespaceaccessreview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/identityk8sappscodecom-siteinfo-editor/Chart.yaml b/charts/identityk8sappscodecom-siteinfo-editor/Chart.yaml index eb23d976f7..7d429036b2 100644 --- a/charts/identityk8sappscodecom-siteinfo-editor/Chart.yaml +++ b/charts/identityk8sappscodecom-siteinfo-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"identity.k8s.appscode.com","version":"v1alpha1","resource":"siteinfos"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SiteInfo Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: identityk8sappscodecom-siteinfo-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/identityk8sappscodecom-siteinfo-editor/README.md b/charts/identityk8sappscodecom-siteinfo-editor/README.md index 9d3807f50d..4025de6ca0 100644 --- a/charts/identityk8sappscodecom-siteinfo-editor/README.md +++ b/charts/identityk8sappscodecom-siteinfo-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/identityk8sappscodecom-siteinfo-editor --version=v0.23.0 -$ helm upgrade -i identityk8sappscodecom-siteinfo-editor appscode/identityk8sappscodecom-siteinfo-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/identityk8sappscodecom-siteinfo-editor --version=v0.24.0 +$ helm upgrade -i identityk8sappscodecom-siteinfo-editor appscode/identityk8sappscodecom-siteinfo-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SiteInfo Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `identityk8sappscodecom-siteinfo-editor`: ```bash -$ helm upgrade -i identityk8sappscodecom-siteinfo-editor appscode/identityk8sappscodecom-siteinfo-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i identityk8sappscodecom-siteinfo-editor appscode/identityk8sappscodecom-siteinfo-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SiteInfo Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `identityk8sappscod Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i identityk8sappscodecom-siteinfo-editor appscode/identityk8sappscodecom-siteinfo-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=identity.k8s.appscode.com/v1alpha1 +$ helm upgrade -i identityk8sappscodecom-siteinfo-editor appscode/identityk8sappscodecom-siteinfo-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=identity.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i identityk8sappscodecom-siteinfo-editor appscode/identityk8sappscodecom-siteinfo-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i identityk8sappscodecom-siteinfo-editor appscode/identityk8sappscodecom-siteinfo-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/imagepolicyk8sio-imagereview-editor/Chart.yaml b/charts/imagepolicyk8sio-imagereview-editor/Chart.yaml index 03a2061361..1cf0c1396d 100644 --- a/charts/imagepolicyk8sio-imagereview-editor/Chart.yaml +++ b/charts/imagepolicyk8sio-imagereview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"imagepolicy.k8s.io","version":"v1alpha1","resource":"imagereviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ImageReview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: imagepolicyk8sio-imagereview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/imagepolicyk8sio-imagereview-editor/README.md b/charts/imagepolicyk8sio-imagereview-editor/README.md index b25964a397..6fdaefa10d 100644 --- a/charts/imagepolicyk8sio-imagereview-editor/README.md +++ b/charts/imagepolicyk8sio-imagereview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/imagepolicyk8sio-imagereview-editor --version=v0.23.0 -$ helm upgrade -i imagepolicyk8sio-imagereview-editor appscode/imagepolicyk8sio-imagereview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/imagepolicyk8sio-imagereview-editor --version=v0.24.0 +$ helm upgrade -i imagepolicyk8sio-imagereview-editor appscode/imagepolicyk8sio-imagereview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ImageReview Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `imagepolicyk8sio-imagereview-editor`: ```bash -$ helm upgrade -i imagepolicyk8sio-imagereview-editor appscode/imagepolicyk8sio-imagereview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i imagepolicyk8sio-imagereview-editor appscode/imagepolicyk8sio-imagereview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ImageReview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `imagepolicyk8sio-i Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i imagepolicyk8sio-imagereview-editor appscode/imagepolicyk8sio-imagereview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=imagepolicy.k8s.io/v1alpha1 +$ helm upgrade -i imagepolicyk8sio-imagereview-editor appscode/imagepolicyk8sio-imagereview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=imagepolicy.k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i imagepolicyk8sio-imagereview-editor appscode/imagepolicyk8sio-imagereview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i imagepolicyk8sio-imagereview-editor appscode/imagepolicyk8sio-imagereview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/imagetoolkitfluxcdio-imagepolicy-editor/Chart.yaml b/charts/imagetoolkitfluxcdio-imagepolicy-editor/Chart.yaml index 7a0fa069c4..dd50fcadcd 100644 --- a/charts/imagetoolkitfluxcdio-imagepolicy-editor/Chart.yaml +++ b/charts/imagetoolkitfluxcdio-imagepolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"image.toolkit.fluxcd.io","version":"v1beta2","resource":"imagepolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ImagePolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: imagetoolkitfluxcdio-imagepolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/imagetoolkitfluxcdio-imagepolicy-editor/README.md b/charts/imagetoolkitfluxcdio-imagepolicy-editor/README.md index 5a6442247e..44e576f947 100644 --- a/charts/imagetoolkitfluxcdio-imagepolicy-editor/README.md +++ b/charts/imagetoolkitfluxcdio-imagepolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/imagetoolkitfluxcdio-imagepolicy-editor --version=v0.23.0 -$ helm upgrade -i imagetoolkitfluxcdio-imagepolicy-editor appscode/imagetoolkitfluxcdio-imagepolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/imagetoolkitfluxcdio-imagepolicy-editor --version=v0.24.0 +$ helm upgrade -i imagetoolkitfluxcdio-imagepolicy-editor appscode/imagetoolkitfluxcdio-imagepolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ImagePolicy Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `imagetoolkitfluxcdio-imagepolicy-editor`: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imagepolicy-editor appscode/imagetoolkitfluxcdio-imagepolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i imagetoolkitfluxcdio-imagepolicy-editor appscode/imagetoolkitfluxcdio-imagepolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ImagePolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `imagetoolkitfluxcd Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imagepolicy-editor appscode/imagetoolkitfluxcdio-imagepolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=image.toolkit.fluxcd.io/v1beta2 +$ helm upgrade -i imagetoolkitfluxcdio-imagepolicy-editor appscode/imagetoolkitfluxcdio-imagepolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=image.toolkit.fluxcd.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imagepolicy-editor appscode/imagetoolkitfluxcdio-imagepolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i imagetoolkitfluxcdio-imagepolicy-editor appscode/imagetoolkitfluxcdio-imagepolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/imagetoolkitfluxcdio-imagerepository-editor/Chart.yaml b/charts/imagetoolkitfluxcdio-imagerepository-editor/Chart.yaml index 0212837417..41892d04c3 100644 --- a/charts/imagetoolkitfluxcdio-imagerepository-editor/Chart.yaml +++ b/charts/imagetoolkitfluxcdio-imagerepository-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"image.toolkit.fluxcd.io","version":"v1beta2","resource":"imagerepositories"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ImageRepository Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: imagetoolkitfluxcdio-imagerepository-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/imagetoolkitfluxcdio-imagerepository-editor/README.md b/charts/imagetoolkitfluxcdio-imagerepository-editor/README.md index 8363136bc6..fd40e1b9c1 100644 --- a/charts/imagetoolkitfluxcdio-imagerepository-editor/README.md +++ b/charts/imagetoolkitfluxcdio-imagerepository-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/imagetoolkitfluxcdio-imagerepository-editor --version=v0.23.0 -$ helm upgrade -i imagetoolkitfluxcdio-imagerepository-editor appscode/imagetoolkitfluxcdio-imagerepository-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/imagetoolkitfluxcdio-imagerepository-editor --version=v0.24.0 +$ helm upgrade -i imagetoolkitfluxcdio-imagerepository-editor appscode/imagetoolkitfluxcdio-imagerepository-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ImageRepository Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `imagetoolkitfluxcdio-imagerepository-editor`: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imagerepository-editor appscode/imagetoolkitfluxcdio-imagerepository-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i imagetoolkitfluxcdio-imagerepository-editor appscode/imagetoolkitfluxcdio-imagerepository-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ImageRepository Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `imagetoolkitfluxcd Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imagerepository-editor appscode/imagetoolkitfluxcdio-imagerepository-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=image.toolkit.fluxcd.io/v1beta2 +$ helm upgrade -i imagetoolkitfluxcdio-imagerepository-editor appscode/imagetoolkitfluxcdio-imagerepository-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=image.toolkit.fluxcd.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imagerepository-editor appscode/imagetoolkitfluxcdio-imagerepository-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i imagetoolkitfluxcdio-imagerepository-editor appscode/imagetoolkitfluxcdio-imagerepository-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/imagetoolkitfluxcdio-imageupdateautomation-editor/Chart.yaml b/charts/imagetoolkitfluxcdio-imageupdateautomation-editor/Chart.yaml index 26b9d0288a..20996abd5e 100644 --- a/charts/imagetoolkitfluxcdio-imageupdateautomation-editor/Chart.yaml +++ b/charts/imagetoolkitfluxcdio-imageupdateautomation-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"image.toolkit.fluxcd.io","version":"v1beta2","resource":"imageupdateautomations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ImageUpdateAutomation Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: imagetoolkitfluxcdio-imageupdateautomation-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/imagetoolkitfluxcdio-imageupdateautomation-editor/README.md b/charts/imagetoolkitfluxcdio-imageupdateautomation-editor/README.md index 474810a632..a412cd6075 100644 --- a/charts/imagetoolkitfluxcdio-imageupdateautomation-editor/README.md +++ b/charts/imagetoolkitfluxcdio-imageupdateautomation-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/imagetoolkitfluxcdio-imageupdateautomation-editor --version=v0.23.0 -$ helm upgrade -i imagetoolkitfluxcdio-imageupdateautomation-editor appscode/imagetoolkitfluxcdio-imageupdateautomation-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/imagetoolkitfluxcdio-imageupdateautomation-editor --version=v0.24.0 +$ helm upgrade -i imagetoolkitfluxcdio-imageupdateautomation-editor appscode/imagetoolkitfluxcdio-imageupdateautomation-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ImageUpdateAutomation Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `imagetoolkitfluxcdio-imageupdateautomation-editor`: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imageupdateautomation-editor appscode/imagetoolkitfluxcdio-imageupdateautomation-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i imagetoolkitfluxcdio-imageupdateautomation-editor appscode/imagetoolkitfluxcdio-imageupdateautomation-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ImageUpdateAutomation Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `imagetoolkitfluxcd Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imageupdateautomation-editor appscode/imagetoolkitfluxcdio-imageupdateautomation-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=image.toolkit.fluxcd.io/v1beta2 +$ helm upgrade -i imagetoolkitfluxcdio-imageupdateautomation-editor appscode/imagetoolkitfluxcdio-imageupdateautomation-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=image.toolkit.fluxcd.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i imagetoolkitfluxcdio-imageupdateautomation-editor appscode/imagetoolkitfluxcdio-imageupdateautomation-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i imagetoolkitfluxcdio-imageupdateautomation-editor appscode/imagetoolkitfluxcdio-imageupdateautomation-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awscluster-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awscluster-editor/Chart.yaml index 6406a9a5b0..e7c4ba4d71 100644 --- a/charts/infrastructureclusterxk8sio-awscluster-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awscluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsclusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AWSCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awscluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-awscluster-editor/README.md b/charts/infrastructureclusterxk8sio-awscluster-editor/README.md index 43605a31ea..0421aa3600 100644 --- a/charts/infrastructureclusterxk8sio-awscluster-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awscluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awscluster-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-awscluster-editor appscode/infrastructureclusterxk8sio-awscluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awscluster-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-awscluster-editor appscode/infrastructureclusterxk8sio-awscluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSCluster Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awscluster-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awscluster-editor appscode/infrastructureclusterxk8sio-awscluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-awscluster-editor appscode/infrastructureclusterxk8sio-awscluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AWSCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awscluster-editor appscode/infrastructureclusterxk8sio-awscluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awscluster-editor appscode/infrastructureclusterxk8sio-awscluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awscluster-editor appscode/infrastructureclusterxk8sio-awscluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awscluster-editor appscode/infrastructureclusterxk8sio-awscluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor/Chart.yaml index 314d0f5888..7c975b47d1 100644 --- a/charts/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsclustercontrolleridentities"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AWSClusterControllerIdentity Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsclustercontrolleridentity-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor/README.md b/charts/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor/README.md index 9eac00c36c..60254d8844 100644 --- a/charts/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsclustercontrolleridentity-editor appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsclustercontrolleridentity-editor appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSClusterControllerIdentity Editor on a [Kubernetes](http: To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsclustercontrolleridentity-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclustercontrolleridentity-editor appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsclustercontrolleridentity-editor appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AWSClusterControllerIdentity Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclustercontrolleridentity-editor appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsclustercontrolleridentity-editor appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclustercontrolleridentity-editor appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsclustercontrolleridentity-editor appscode/infrastructureclusterxk8sio-awsclustercontrolleridentity-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsclusterroleidentity-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsclusterroleidentity-editor/Chart.yaml index 353715147e..4449e1ac36 100644 --- a/charts/infrastructureclusterxk8sio-awsclusterroleidentity-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsclusterroleidentity-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsclusterroleidentities"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AWSClusterRoleIdentity Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsclusterroleidentity-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-awsclusterroleidentity-editor/README.md b/charts/infrastructureclusterxk8sio-awsclusterroleidentity-editor/README.md index 7162fd61d6..cd5e0a9a6f 100644 --- a/charts/infrastructureclusterxk8sio-awsclusterroleidentity-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsclusterroleidentity-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsclusterroleidentity-editor appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsclusterroleidentity-editor appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSClusterRoleIdentity Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsclusterroleidentity-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclusterroleidentity-editor appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsclusterroleidentity-editor appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AWSClusterRoleIdentity Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclusterroleidentity-editor appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsclusterroleidentity-editor appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclusterroleidentity-editor appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsclusterroleidentity-editor appscode/infrastructureclusterxk8sio-awsclusterroleidentity-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsclusterstaticidentity-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsclusterstaticidentity-editor/Chart.yaml index c2511da85e..29031dd6e3 100644 --- a/charts/infrastructureclusterxk8sio-awsclusterstaticidentity-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsclusterstaticidentity-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsclusterstaticidentities"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AWSClusterStaticIdentity Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsclusterstaticidentity-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-awsclusterstaticidentity-editor/README.md b/charts/infrastructureclusterxk8sio-awsclusterstaticidentity-editor/README.md index 5f1b6de28f..e9624135d8 100644 --- a/charts/infrastructureclusterxk8sio-awsclusterstaticidentity-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsclusterstaticidentity-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsclusterstaticidentity-editor appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsclusterstaticidentity-editor appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSClusterStaticIdentity Editor on a [Kubernetes](http://ku To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsclusterstaticidentity-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclusterstaticidentity-editor appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsclusterstaticidentity-editor appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AWSClusterStaticIdentity Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclusterstaticidentity-editor appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsclusterstaticidentity-editor appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclusterstaticidentity-editor appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsclusterstaticidentity-editor appscode/infrastructureclusterxk8sio-awsclusterstaticidentity-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsclustertemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsclustertemplate-editor/Chart.yaml index fb8d62e4fb..bfdf441f69 100644 --- a/charts/infrastructureclusterxk8sio-awsclustertemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsclustertemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsclustertemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AWSClusterTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsclustertemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-awsclustertemplate-editor/README.md b/charts/infrastructureclusterxk8sio-awsclustertemplate-editor/README.md index cdbffb2b24..d2656b3164 100644 --- a/charts/infrastructureclusterxk8sio-awsclustertemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsclustertemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsclustertemplate-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsclustertemplate-editor appscode/infrastructureclusterxk8sio-awsclustertemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsclustertemplate-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsclustertemplate-editor appscode/infrastructureclusterxk8sio-awsclustertemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSClusterTemplate Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsclustertemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclustertemplate-editor appscode/infrastructureclusterxk8sio-awsclustertemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsclustertemplate-editor appscode/infrastructureclusterxk8sio-awsclustertemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AWSClusterTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclustertemplate-editor appscode/infrastructureclusterxk8sio-awsclustertemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsclustertemplate-editor appscode/infrastructureclusterxk8sio-awsclustertemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsclustertemplate-editor appscode/infrastructureclusterxk8sio-awsclustertemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsclustertemplate-editor appscode/infrastructureclusterxk8sio-awsclustertemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsfargateprofile-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsfargateprofile-editor/Chart.yaml index 68e465357f..ea6b3e02c0 100644 --- a/charts/infrastructureclusterxk8sio-awsfargateprofile-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsfargateprofile-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsfargateprofiles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AWSFargateProfile Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsfargateprofile-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-awsfargateprofile-editor/README.md b/charts/infrastructureclusterxk8sio-awsfargateprofile-editor/README.md index c581c96b18..7810a42ed4 100644 --- a/charts/infrastructureclusterxk8sio-awsfargateprofile-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsfargateprofile-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsfargateprofile-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsfargateprofile-editor appscode/infrastructureclusterxk8sio-awsfargateprofile-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsfargateprofile-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsfargateprofile-editor appscode/infrastructureclusterxk8sio-awsfargateprofile-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSFargateProfile Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsfargateprofile-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsfargateprofile-editor appscode/infrastructureclusterxk8sio-awsfargateprofile-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsfargateprofile-editor appscode/infrastructureclusterxk8sio-awsfargateprofile-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AWSFargateProfile Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsfargateprofile-editor appscode/infrastructureclusterxk8sio-awsfargateprofile-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsfargateprofile-editor appscode/infrastructureclusterxk8sio-awsfargateprofile-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsfargateprofile-editor appscode/infrastructureclusterxk8sio-awsfargateprofile-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsfargateprofile-editor appscode/infrastructureclusterxk8sio-awsfargateprofile-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsmachine-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsmachine-editor/Chart.yaml index bb624b10cb..778bb7d720 100644 --- a/charts/infrastructureclusterxk8sio-awsmachine-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsmachine-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsmachines"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AWSMachine Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsmachine-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-awsmachine-editor/README.md b/charts/infrastructureclusterxk8sio-awsmachine-editor/README.md index 3d128e3f68..985224f9a1 100644 --- a/charts/infrastructureclusterxk8sio-awsmachine-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsmachine-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsmachine-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsmachine-editor appscode/infrastructureclusterxk8sio-awsmachine-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsmachine-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachine-editor appscode/infrastructureclusterxk8sio-awsmachine-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSMachine Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsmachine-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachine-editor appscode/infrastructureclusterxk8sio-awsmachine-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachine-editor appscode/infrastructureclusterxk8sio-awsmachine-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AWSMachine Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachine-editor appscode/infrastructureclusterxk8sio-awsmachine-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachine-editor appscode/infrastructureclusterxk8sio-awsmachine-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachine-editor appscode/infrastructureclusterxk8sio-awsmachine-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsmachine-editor appscode/infrastructureclusterxk8sio-awsmachine-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsmachinepool-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsmachinepool-editor/Chart.yaml index 1020ca02d2..74929c7fc3 100644 --- a/charts/infrastructureclusterxk8sio-awsmachinepool-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsmachinepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsmachinepools"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AWSMachinePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsmachinepool-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-awsmachinepool-editor/README.md b/charts/infrastructureclusterxk8sio-awsmachinepool-editor/README.md index 530b585612..0157dd8a8d 100644 --- a/charts/infrastructureclusterxk8sio-awsmachinepool-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsmachinepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsmachinepool-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsmachinepool-editor appscode/infrastructureclusterxk8sio-awsmachinepool-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsmachinepool-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachinepool-editor appscode/infrastructureclusterxk8sio-awsmachinepool-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSMachinePool Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsmachinepool-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachinepool-editor appscode/infrastructureclusterxk8sio-awsmachinepool-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachinepool-editor appscode/infrastructureclusterxk8sio-awsmachinepool-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AWSMachinePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachinepool-editor appscode/infrastructureclusterxk8sio-awsmachinepool-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachinepool-editor appscode/infrastructureclusterxk8sio-awsmachinepool-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachinepool-editor appscode/infrastructureclusterxk8sio-awsmachinepool-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsmachinepool-editor appscode/infrastructureclusterxk8sio-awsmachinepool-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsmachinetemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsmachinetemplate-editor/Chart.yaml index 40bf074315..da17eb4039 100644 --- a/charts/infrastructureclusterxk8sio-awsmachinetemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsmachinetemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsmachinetemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AWSMachineTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsmachinetemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-awsmachinetemplate-editor/README.md b/charts/infrastructureclusterxk8sio-awsmachinetemplate-editor/README.md index f7ad63dd6f..2b9cdbf6cb 100644 --- a/charts/infrastructureclusterxk8sio-awsmachinetemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsmachinetemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsmachinetemplate-editor appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachinetemplate-editor appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSMachineTemplate Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsmachinetemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachinetemplate-editor appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachinetemplate-editor appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AWSMachineTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachinetemplate-editor appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsmachinetemplate-editor appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmachinetemplate-editor appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsmachinetemplate-editor appscode/infrastructureclusterxk8sio-awsmachinetemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsmanagedcluster-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsmanagedcluster-editor/Chart.yaml index 53b3f7dcbd..dcf1a90d68 100644 --- a/charts/infrastructureclusterxk8sio-awsmanagedcluster-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsmanagedcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsmanagedclusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AWSManagedCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsmanagedcluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-awsmanagedcluster-editor/README.md b/charts/infrastructureclusterxk8sio-awsmanagedcluster-editor/README.md index eeebfc6208..baaa616a58 100644 --- a/charts/infrastructureclusterxk8sio-awsmanagedcluster-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsmanagedcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedcluster-editor appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedcluster-editor appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSManagedCluster Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsmanagedcluster-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedcluster-editor appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedcluster-editor appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AWSManagedCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedcluster-editor appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedcluster-editor appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedcluster-editor appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedcluster-editor appscode/infrastructureclusterxk8sio-awsmanagedcluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-awsmanagedmachinepool-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-awsmanagedmachinepool-editor/Chart.yaml index feb2b46cc6..509ef8aa57 100644 --- a/charts/infrastructureclusterxk8sio-awsmanagedmachinepool-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-awsmanagedmachinepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"awsmanagedmachinepools"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AWSManagedMachinePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-awsmanagedmachinepool-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-awsmanagedmachinepool-editor/README.md b/charts/infrastructureclusterxk8sio-awsmanagedmachinepool-editor/README.md index 33a9578e28..aad30acd22 100644 --- a/charts/infrastructureclusterxk8sio-awsmanagedmachinepool-editor/README.md +++ b/charts/infrastructureclusterxk8sio-awsmanagedmachinepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AWSManagedMachinePool Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `infrastructureclusterxk8sio-awsmanagedmachinepool-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AWSManagedMachinePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-awsmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-awsmanagedmachinepool-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedcluster-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureasomanagedcluster-editor/Chart.yaml index bb7fe0a595..004b224501 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedcluster-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureasomanagedcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha1","resource":"azureasomanagedclusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureASOManagedCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureasomanagedcluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedcluster-editor/README.md b/charts/infrastructureclusterxk8sio-azureasomanagedcluster-editor/README.md index 99b6e41723..390766dad8 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedcluster-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureasomanagedcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcluster-editor appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcluster-editor appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureASOManagedCluster Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureasomanagedcluster-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcluster-editor appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcluster-editor appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureASOManagedCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcluster-editor appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcluster-editor appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcluster-editor appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcluster-editor appscode/infrastructureclusterxk8sio-azureasomanagedcluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor/Chart.yaml index 5d24217477..7bb31a2b79 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha1","resource":"azureasomanagedclustertemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureASOManagedClusterTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor/README.md b/charts/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor/README.md index 2af163f912..d7dafd59eb 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureASOManagedClusterTemplate Editor on a [Kubernetes](htt To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureASOManagedClusterTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedclustertemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor/Chart.yaml index fcccb6550e..b6370096d5 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha1","resource":"azureasomanagedcontrolplanes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureASOManagedControlPlane Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor/README.md b/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor/README.md index 35be47644f..a8b60783dd 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureASOManagedControlPlane Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureASOManagedControlPlane Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplane-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor/Chart.yaml index 14ac0dd9a5..93458aab80 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha1","resource":"azureasomanagedcontrolplanetemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureASOManagedControlPlaneTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor/README.md b/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor/README.md index f5c16b1835..96bd81ed8b 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureASOManagedControlPlaneTemplate Editor on a [Kubernetes To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureASOManagedControlPlaneTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor/Chart.yaml index a17cd2a0dd..680694b71e 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha1","resource":"azureasomanagedmachinepools"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureASOManagedMachinePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureasomanagedmachinepool-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor/README.md b/charts/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor/README.md index e53ce4cd06..5e13c04c2e 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureASOManagedMachinePool Editor on a [Kubernetes](http:// To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureasomanagedmachinepool-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureASOManagedMachinePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepool-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor/Chart.yaml index 0073413025..241cc56776 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha1","resource":"azureasomanagedmachinepooltemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureASOManagedMachinePoolTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor/README.md b/charts/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor/README.md index 8be70623b7..07e6c2ef12 100644 --- a/charts/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureASOManagedMachinePoolTemplate Editor on a [Kubernetes] To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureASOManagedMachinePoolTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azureasomanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azurecluster-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azurecluster-editor/Chart.yaml index b48830eab2..409d6e89db 100644 --- a/charts/infrastructureclusterxk8sio-azurecluster-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azurecluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azureclusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azurecluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azurecluster-editor/README.md b/charts/infrastructureclusterxk8sio-azurecluster-editor/README.md index 97604a9869..2b1fd102c8 100644 --- a/charts/infrastructureclusterxk8sio-azurecluster-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azurecluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azurecluster-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azurecluster-editor appscode/infrastructureclusterxk8sio-azurecluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azurecluster-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azurecluster-editor appscode/infrastructureclusterxk8sio-azurecluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureCluster Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azurecluster-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azurecluster-editor appscode/infrastructureclusterxk8sio-azurecluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azurecluster-editor appscode/infrastructureclusterxk8sio-azurecluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azurecluster-editor appscode/infrastructureclusterxk8sio-azurecluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azurecluster-editor appscode/infrastructureclusterxk8sio-azurecluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azurecluster-editor appscode/infrastructureclusterxk8sio-azurecluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azurecluster-editor appscode/infrastructureclusterxk8sio-azurecluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureclusteridentity-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureclusteridentity-editor/Chart.yaml index c01c218607..e69dee6c8f 100644 --- a/charts/infrastructureclusterxk8sio-azureclusteridentity-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureclusteridentity-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azureclusteridentities"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureClusterIdentity Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureclusteridentity-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azureclusteridentity-editor/README.md b/charts/infrastructureclusterxk8sio-azureclusteridentity-editor/README.md index d1f004f036..dfdc787943 100644 --- a/charts/infrastructureclusterxk8sio-azureclusteridentity-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureclusteridentity-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureclusteridentity-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureclusteridentity-editor appscode/infrastructureclusterxk8sio-azureclusteridentity-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureclusteridentity-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureclusteridentity-editor appscode/infrastructureclusterxk8sio-azureclusteridentity-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureClusterIdentity Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureclusteridentity-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureclusteridentity-editor appscode/infrastructureclusterxk8sio-azureclusteridentity-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureclusteridentity-editor appscode/infrastructureclusterxk8sio-azureclusteridentity-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureClusterIdentity Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureclusteridentity-editor appscode/infrastructureclusterxk8sio-azureclusteridentity-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azureclusteridentity-editor appscode/infrastructureclusterxk8sio-azureclusteridentity-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureclusteridentity-editor appscode/infrastructureclusterxk8sio-azureclusteridentity-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureclusteridentity-editor appscode/infrastructureclusterxk8sio-azureclusteridentity-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureclustertemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureclustertemplate-editor/Chart.yaml index 568adec54f..2fdc1c492d 100644 --- a/charts/infrastructureclusterxk8sio-azureclustertemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureclustertemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azureclustertemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureClusterTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureclustertemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azureclustertemplate-editor/README.md b/charts/infrastructureclusterxk8sio-azureclustertemplate-editor/README.md index 5fc489b1ce..3a3d938dd1 100644 --- a/charts/infrastructureclusterxk8sio-azureclustertemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureclustertemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureclustertemplate-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureclustertemplate-editor appscode/infrastructureclusterxk8sio-azureclustertemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureclustertemplate-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureclustertemplate-editor appscode/infrastructureclusterxk8sio-azureclustertemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureClusterTemplate Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureclustertemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureclustertemplate-editor appscode/infrastructureclusterxk8sio-azureclustertemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureclustertemplate-editor appscode/infrastructureclusterxk8sio-azureclustertemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureClusterTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureclustertemplate-editor appscode/infrastructureclusterxk8sio-azureclustertemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azureclustertemplate-editor appscode/infrastructureclusterxk8sio-azureclustertemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureclustertemplate-editor appscode/infrastructureclusterxk8sio-azureclustertemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureclustertemplate-editor appscode/infrastructureclusterxk8sio-azureclustertemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremachine-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremachine-editor/Chart.yaml index b3874ffbc6..6ae0fdb0be 100644 --- a/charts/infrastructureclusterxk8sio-azuremachine-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremachine-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremachines"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureMachine Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremachine-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azuremachine-editor/README.md b/charts/infrastructureclusterxk8sio-azuremachine-editor/README.md index a66ff35b99..0ea82a892e 100644 --- a/charts/infrastructureclusterxk8sio-azuremachine-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremachine-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremachine-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremachine-editor appscode/infrastructureclusterxk8sio-azuremachine-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremachine-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachine-editor appscode/infrastructureclusterxk8sio-azuremachine-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureMachine Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremachine-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachine-editor appscode/infrastructureclusterxk8sio-azuremachine-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachine-editor appscode/infrastructureclusterxk8sio-azuremachine-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureMachine Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachine-editor appscode/infrastructureclusterxk8sio-azuremachine-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachine-editor appscode/infrastructureclusterxk8sio-azuremachine-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachine-editor appscode/infrastructureclusterxk8sio-azuremachine-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremachine-editor appscode/infrastructureclusterxk8sio-azuremachine-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremachinepool-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremachinepool-editor/Chart.yaml index ba7ca21d1f..d65a438792 100644 --- a/charts/infrastructureclusterxk8sio-azuremachinepool-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremachinepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremachinepools"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureMachinePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremachinepool-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azuremachinepool-editor/README.md b/charts/infrastructureclusterxk8sio-azuremachinepool-editor/README.md index c384656774..561535ccec 100644 --- a/charts/infrastructureclusterxk8sio-azuremachinepool-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremachinepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremachinepool-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepool-editor appscode/infrastructureclusterxk8sio-azuremachinepool-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremachinepool-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepool-editor appscode/infrastructureclusterxk8sio-azuremachinepool-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureMachinePool Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremachinepool-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepool-editor appscode/infrastructureclusterxk8sio-azuremachinepool-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepool-editor appscode/infrastructureclusterxk8sio-azuremachinepool-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureMachinePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepool-editor appscode/infrastructureclusterxk8sio-azuremachinepool-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepool-editor appscode/infrastructureclusterxk8sio-azuremachinepool-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepool-editor appscode/infrastructureclusterxk8sio-azuremachinepool-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepool-editor appscode/infrastructureclusterxk8sio-azuremachinepool-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremachinepoolmachine-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremachinepoolmachine-editor/Chart.yaml index c59bdabc26..f8c42ce34a 100644 --- a/charts/infrastructureclusterxk8sio-azuremachinepoolmachine-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremachinepoolmachine-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremachinepoolmachines"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureMachinePoolMachine Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremachinepoolmachine-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azuremachinepoolmachine-editor/README.md b/charts/infrastructureclusterxk8sio-azuremachinepoolmachine-editor/README.md index 06c564bf9c..3404d4dc4f 100644 --- a/charts/infrastructureclusterxk8sio-azuremachinepoolmachine-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremachinepoolmachine-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepoolmachine-editor appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepoolmachine-editor appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureMachinePoolMachine Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremachinepoolmachine-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepoolmachine-editor appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepoolmachine-editor appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureMachinePoolMachine Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepoolmachine-editor appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepoolmachine-editor appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepoolmachine-editor appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinepoolmachine-editor appscode/infrastructureclusterxk8sio-azuremachinepoolmachine-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremachinetemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremachinetemplate-editor/Chart.yaml index c45931946e..7d02d28fc0 100644 --- a/charts/infrastructureclusterxk8sio-azuremachinetemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremachinetemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremachinetemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureMachineTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremachinetemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azuremachinetemplate-editor/README.md b/charts/infrastructureclusterxk8sio-azuremachinetemplate-editor/README.md index 50f5d18dcf..998315e5db 100644 --- a/charts/infrastructureclusterxk8sio-azuremachinetemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremachinetemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinetemplate-editor appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinetemplate-editor appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureMachineTemplate Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremachinetemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinetemplate-editor appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinetemplate-editor appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureMachineTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinetemplate-editor appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinetemplate-editor appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremachinetemplate-editor appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremachinetemplate-editor appscode/infrastructureclusterxk8sio-azuremachinetemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremanagedcluster-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremanagedcluster-editor/Chart.yaml index 8f763611b8..b710813b0f 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedcluster-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremanagedcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremanagedclusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureManagedCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremanagedcluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azuremanagedcluster-editor/README.md b/charts/infrastructureclusterxk8sio-azuremanagedcluster-editor/README.md index 14cac76736..a50172f31c 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedcluster-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremanagedcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcluster-editor appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcluster-editor appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureManagedCluster Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremanagedcluster-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcluster-editor appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcluster-editor appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureManagedCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcluster-editor appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcluster-editor appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcluster-editor appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcluster-editor appscode/infrastructureclusterxk8sio-azuremanagedcluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor/Chart.yaml index e0d9b0a8fa..f07346db60 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremanagedclustertemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureManagedClusterTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremanagedclustertemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor/README.md b/charts/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor/README.md index d8ed6fd52d..e062c6b37b 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureManagedClusterTemplate Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremanagedclustertemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureManagedClusterTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedclustertemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedclustertemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor/Chart.yaml index 028cebf8d6..7d6508cfd3 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremanagedcontrolplanes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureManagedControlPlane Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremanagedcontrolplane-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor/README.md b/charts/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor/README.md index 7a57ccb15c..1e0692f2f2 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureManagedControlPlane Editor on a [Kubernetes](http://ku To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremanagedcontrolplane-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureManagedControlPlane Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplane-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor/Chart.yaml index 85a52de3f7..df44409707 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremanagedcontrolplanetemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureManagedControlPlaneTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor/README.md b/charts/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor/README.md index aa1e0dbc4e..412185ac7f 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureManagedControlPlaneTemplate Editor on a [Kubernetes](h To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureManagedControlPlaneTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedcontrolplanetemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremanagedmachinepool-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremanagedmachinepool-editor/Chart.yaml index 603c0ca514..b2e8de9747 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedmachinepool-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremanagedmachinepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremanagedmachinepools"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureManagedMachinePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremanagedmachinepool-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azuremanagedmachinepool-editor/README.md b/charts/infrastructureclusterxk8sio-azuremanagedmachinepool-editor/README.md index b2d7b06694..15ade525d6 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedmachinepool-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremanagedmachinepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureManagedMachinePool Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremanagedmachinepool-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureManagedMachinePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepool-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepool-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor/Chart.yaml index e6080774bd..5930480893 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"azuremanagedmachinepooltemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureManagedMachinePoolTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor/README.md b/charts/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor/README.md index 821174f32c..0030d526f9 100644 --- a/charts/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureManagedMachinePoolTemplate Editor on a [Kubernetes](ht To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureManagedMachinePoolTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor appscode/infrastructureclusterxk8sio-azuremanagedmachinepooltemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureserviceprincipal-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureserviceprincipal-editor/Chart.yaml index 4544cdecd8..bf62ec94d4 100644 --- a/charts/infrastructureclusterxk8sio-azureserviceprincipal-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureserviceprincipal-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha3","resource":"azureserviceprincipals"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureServicePrincipal Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureserviceprincipal-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azureserviceprincipal-editor/README.md b/charts/infrastructureclusterxk8sio-azureserviceprincipal-editor/README.md index afd4fb05b8..9f0e910c27 100644 --- a/charts/infrastructureclusterxk8sio-azureserviceprincipal-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureserviceprincipal-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureserviceprincipal-editor appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureserviceprincipal-editor appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureServicePrincipal Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureserviceprincipal-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureserviceprincipal-editor appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureserviceprincipal-editor appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureServicePrincipal Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureserviceprincipal-editor appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha3 +$ helm upgrade -i infrastructureclusterxk8sio-azureserviceprincipal-editor appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha3 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureserviceprincipal-editor appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureserviceprincipal-editor appscode/infrastructureclusterxk8sio-azureserviceprincipal-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azuresystemassignedidentity-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azuresystemassignedidentity-editor/Chart.yaml index 1daaa86805..a68ae08f1b 100644 --- a/charts/infrastructureclusterxk8sio-azuresystemassignedidentity-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azuresystemassignedidentity-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha3","resource":"azuresystemassignedidentites"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureSystemAssignedIdentity Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azuresystemassignedidentity-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azuresystemassignedidentity-editor/README.md b/charts/infrastructureclusterxk8sio-azuresystemassignedidentity-editor/README.md index c2b5298de6..851723d5d9 100644 --- a/charts/infrastructureclusterxk8sio-azuresystemassignedidentity-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azuresystemassignedidentity-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azuresystemassignedidentity-editor appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuresystemassignedidentity-editor appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureSystemAssignedIdentity Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azuresystemassignedidentity-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuresystemassignedidentity-editor appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azuresystemassignedidentity-editor appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureSystemAssignedIdentity Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuresystemassignedidentity-editor appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha3 +$ helm upgrade -i infrastructureclusterxk8sio-azuresystemassignedidentity-editor appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha3 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azuresystemassignedidentity-editor appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azuresystemassignedidentity-editor appscode/infrastructureclusterxk8sio-azuresystemassignedidentity-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-azureuserassignedidentity-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-azureuserassignedidentity-editor/Chart.yaml index 01f748bb40..2a834722d4 100644 --- a/charts/infrastructureclusterxk8sio-azureuserassignedidentity-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-azureuserassignedidentity-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1alpha3","resource":"azureuserassignedidentites"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AzureUserAssignedIdentity Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-azureuserassignedidentity-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-azureuserassignedidentity-editor/README.md b/charts/infrastructureclusterxk8sio-azureuserassignedidentity-editor/README.md index 1b67b08c98..7045601534 100644 --- a/charts/infrastructureclusterxk8sio-azureuserassignedidentity-editor/README.md +++ b/charts/infrastructureclusterxk8sio-azureuserassignedidentity-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-azureuserassignedidentity-editor appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureuserassignedidentity-editor appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AzureUserAssignedIdentity Editor on a [Kubernetes](http://k To install/upgrade the chart with the release name `infrastructureclusterxk8sio-azureuserassignedidentity-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureuserassignedidentity-editor appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-azureuserassignedidentity-editor appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AzureUserAssignedIdentity Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureuserassignedidentity-editor appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha3 +$ helm upgrade -i infrastructureclusterxk8sio-azureuserassignedidentity-editor appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1alpha3 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-azureuserassignedidentity-editor appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-azureuserassignedidentity-editor appscode/infrastructureclusterxk8sio-azureuserassignedidentity-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-gcpcluster-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-gcpcluster-editor/Chart.yaml index 48a55ca82a..26a9f311b2 100644 --- a/charts/infrastructureclusterxk8sio-gcpcluster-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-gcpcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"gcpclusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GCPCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-gcpcluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-gcpcluster-editor/README.md b/charts/infrastructureclusterxk8sio-gcpcluster-editor/README.md index b2524a7729..eb0784d428 100644 --- a/charts/infrastructureclusterxk8sio-gcpcluster-editor/README.md +++ b/charts/infrastructureclusterxk8sio-gcpcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-gcpcluster-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-gcpcluster-editor appscode/infrastructureclusterxk8sio-gcpcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-gcpcluster-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpcluster-editor appscode/infrastructureclusterxk8sio-gcpcluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GCPCluster Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `infrastructureclusterxk8sio-gcpcluster-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpcluster-editor appscode/infrastructureclusterxk8sio-gcpcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpcluster-editor appscode/infrastructureclusterxk8sio-gcpcluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GCPCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpcluster-editor appscode/infrastructureclusterxk8sio-gcpcluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-gcpcluster-editor appscode/infrastructureclusterxk8sio-gcpcluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpcluster-editor appscode/infrastructureclusterxk8sio-gcpcluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-gcpcluster-editor appscode/infrastructureclusterxk8sio-gcpcluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-gcpclustertemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-gcpclustertemplate-editor/Chart.yaml index 0c6e9ce844..09b5a8089a 100644 --- a/charts/infrastructureclusterxk8sio-gcpclustertemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-gcpclustertemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"gcpclustertemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GCPClusterTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-gcpclustertemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-gcpclustertemplate-editor/README.md b/charts/infrastructureclusterxk8sio-gcpclustertemplate-editor/README.md index 19e3033bce..7ce42b3cb0 100644 --- a/charts/infrastructureclusterxk8sio-gcpclustertemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-gcpclustertemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-gcpclustertemplate-editor appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpclustertemplate-editor appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GCPClusterTemplate Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `infrastructureclusterxk8sio-gcpclustertemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpclustertemplate-editor appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpclustertemplate-editor appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GCPClusterTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpclustertemplate-editor appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-gcpclustertemplate-editor appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpclustertemplate-editor appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-gcpclustertemplate-editor appscode/infrastructureclusterxk8sio-gcpclustertemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-gcpmachine-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-gcpmachine-editor/Chart.yaml index 7ff0676a42..73e866e8f3 100644 --- a/charts/infrastructureclusterxk8sio-gcpmachine-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-gcpmachine-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"gcpmachines"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GCPMachine Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-gcpmachine-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-gcpmachine-editor/README.md b/charts/infrastructureclusterxk8sio-gcpmachine-editor/README.md index f5657bc92b..232a60c951 100644 --- a/charts/infrastructureclusterxk8sio-gcpmachine-editor/README.md +++ b/charts/infrastructureclusterxk8sio-gcpmachine-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-gcpmachine-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-gcpmachine-editor appscode/infrastructureclusterxk8sio-gcpmachine-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-gcpmachine-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmachine-editor appscode/infrastructureclusterxk8sio-gcpmachine-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GCPMachine Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `infrastructureclusterxk8sio-gcpmachine-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmachine-editor appscode/infrastructureclusterxk8sio-gcpmachine-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmachine-editor appscode/infrastructureclusterxk8sio-gcpmachine-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GCPMachine Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmachine-editor appscode/infrastructureclusterxk8sio-gcpmachine-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmachine-editor appscode/infrastructureclusterxk8sio-gcpmachine-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmachine-editor appscode/infrastructureclusterxk8sio-gcpmachine-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-gcpmachine-editor appscode/infrastructureclusterxk8sio-gcpmachine-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-gcpmachinetemplate-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-gcpmachinetemplate-editor/Chart.yaml index 10e8d44b28..0c12892913 100644 --- a/charts/infrastructureclusterxk8sio-gcpmachinetemplate-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-gcpmachinetemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"gcpmachinetemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GCPMachineTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-gcpmachinetemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-gcpmachinetemplate-editor/README.md b/charts/infrastructureclusterxk8sio-gcpmachinetemplate-editor/README.md index e6636784ea..23f6a24cbf 100644 --- a/charts/infrastructureclusterxk8sio-gcpmachinetemplate-editor/README.md +++ b/charts/infrastructureclusterxk8sio-gcpmachinetemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-gcpmachinetemplate-editor appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmachinetemplate-editor appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GCPMachineTemplate Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `infrastructureclusterxk8sio-gcpmachinetemplate-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmachinetemplate-editor appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmachinetemplate-editor appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GCPMachineTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmachinetemplate-editor appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmachinetemplate-editor appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmachinetemplate-editor appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-gcpmachinetemplate-editor appscode/infrastructureclusterxk8sio-gcpmachinetemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-gcpmanagedcluster-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-gcpmanagedcluster-editor/Chart.yaml index 01ef0dd424..050c73a768 100644 --- a/charts/infrastructureclusterxk8sio-gcpmanagedcluster-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-gcpmanagedcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"gcpmanagedclusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GCPManagedCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-gcpmanagedcluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-gcpmanagedcluster-editor/README.md b/charts/infrastructureclusterxk8sio-gcpmanagedcluster-editor/README.md index e96bca4c90..cf71a006ef 100644 --- a/charts/infrastructureclusterxk8sio-gcpmanagedcluster-editor/README.md +++ b/charts/infrastructureclusterxk8sio-gcpmanagedcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcluster-editor appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcluster-editor appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GCPManagedCluster Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `infrastructureclusterxk8sio-gcpmanagedcluster-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcluster-editor appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcluster-editor appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GCPManagedCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcluster-editor appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcluster-editor appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcluster-editor appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcluster-editor appscode/infrastructureclusterxk8sio-gcpmanagedcluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor/Chart.yaml index d94c82731b..68f3b10633 100644 --- a/charts/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"gcpmanagedcontrolplanes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GCPManagedControlPlane Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor/README.md b/charts/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor/README.md index 4fbd718927..ca5e6ab531 100644 --- a/charts/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor/README.md +++ b/charts/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GCPManagedControlPlane Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GCPManagedControlPlane Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor appscode/infrastructureclusterxk8sio-gcpmanagedcontrolplane-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor/Chart.yaml index 838790af19..fc9549aab3 100644 --- a/charts/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta1","resource":"gcpmanagedmachinepools"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GCPManagedMachinePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-gcpmanagedmachinepool-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor/README.md b/charts/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor/README.md index ef81396a42..234af17254 100644 --- a/charts/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor/README.md +++ b/charts/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GCPManagedMachinePool Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `infrastructureclusterxk8sio-gcpmanagedmachinepool-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GCPManagedMachinePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-gcpmanagedmachinepool-editor appscode/infrastructureclusterxk8sio-gcpmanagedmachinepool-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-rosacluster-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-rosacluster-editor/Chart.yaml index 7027fdc144..b9b3c58537 100644 --- a/charts/infrastructureclusterxk8sio-rosacluster-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-rosacluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"rosaclusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ROSACluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-rosacluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-rosacluster-editor/README.md b/charts/infrastructureclusterxk8sio-rosacluster-editor/README.md index ad7090f777..207d372f58 100644 --- a/charts/infrastructureclusterxk8sio-rosacluster-editor/README.md +++ b/charts/infrastructureclusterxk8sio-rosacluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-rosacluster-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-rosacluster-editor appscode/infrastructureclusterxk8sio-rosacluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-rosacluster-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-rosacluster-editor appscode/infrastructureclusterxk8sio-rosacluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ROSACluster Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `infrastructureclusterxk8sio-rosacluster-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-rosacluster-editor appscode/infrastructureclusterxk8sio-rosacluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-rosacluster-editor appscode/infrastructureclusterxk8sio-rosacluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ROSACluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-rosacluster-editor appscode/infrastructureclusterxk8sio-rosacluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-rosacluster-editor appscode/infrastructureclusterxk8sio-rosacluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-rosacluster-editor appscode/infrastructureclusterxk8sio-rosacluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-rosacluster-editor appscode/infrastructureclusterxk8sio-rosacluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/infrastructureclusterxk8sio-rosamachinepool-editor/Chart.yaml b/charts/infrastructureclusterxk8sio-rosamachinepool-editor/Chart.yaml index 4c044a9ec6..50b3673c30 100644 --- a/charts/infrastructureclusterxk8sio-rosamachinepool-editor/Chart.yaml +++ b/charts/infrastructureclusterxk8sio-rosamachinepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"infrastructure.cluster.x-k8s.io","version":"v1beta2","resource":"rosamachinepools"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ROSAMachinePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: infrastructureclusterxk8sio-rosamachinepool-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/infrastructureclusterxk8sio-rosamachinepool-editor/README.md b/charts/infrastructureclusterxk8sio-rosamachinepool-editor/README.md index 7344ff2e2e..aa2d4ab247 100644 --- a/charts/infrastructureclusterxk8sio-rosamachinepool-editor/README.md +++ b/charts/infrastructureclusterxk8sio-rosamachinepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/infrastructureclusterxk8sio-rosamachinepool-editor --version=v0.23.0 -$ helm upgrade -i infrastructureclusterxk8sio-rosamachinepool-editor appscode/infrastructureclusterxk8sio-rosamachinepool-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/infrastructureclusterxk8sio-rosamachinepool-editor --version=v0.24.0 +$ helm upgrade -i infrastructureclusterxk8sio-rosamachinepool-editor appscode/infrastructureclusterxk8sio-rosamachinepool-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ROSAMachinePool Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `infrastructureclusterxk8sio-rosamachinepool-editor`: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-rosamachinepool-editor appscode/infrastructureclusterxk8sio-rosamachinepool-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i infrastructureclusterxk8sio-rosamachinepool-editor appscode/infrastructureclusterxk8sio-rosamachinepool-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ROSAMachinePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `infrastructureclus Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-rosamachinepool-editor appscode/infrastructureclusterxk8sio-rosamachinepool-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 +$ helm upgrade -i infrastructureclusterxk8sio-rosamachinepool-editor appscode/infrastructureclusterxk8sio-rosamachinepool-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=infrastructure.cluster.x-k8s.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i infrastructureclusterxk8sio-rosamachinepool-editor appscode/infrastructureclusterxk8sio-rosamachinepool-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i infrastructureclusterxk8sio-rosamachinepool-editor appscode/infrastructureclusterxk8sio-rosamachinepool-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/internalapiserverk8sio-storageversion-editor/Chart.yaml b/charts/internalapiserverk8sio-storageversion-editor/Chart.yaml index 1ab1128a3c..12770c3e93 100644 --- a/charts/internalapiserverk8sio-storageversion-editor/Chart.yaml +++ b/charts/internalapiserverk8sio-storageversion-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"internal.apiserver.k8s.io","version":"v1alpha1","resource":"storageversions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: StorageVersion Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: internalapiserverk8sio-storageversion-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/internalapiserverk8sio-storageversion-editor/README.md b/charts/internalapiserverk8sio-storageversion-editor/README.md index 51c7804160..f6af4ea506 100644 --- a/charts/internalapiserverk8sio-storageversion-editor/README.md +++ b/charts/internalapiserverk8sio-storageversion-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/internalapiserverk8sio-storageversion-editor --version=v0.23.0 -$ helm upgrade -i internalapiserverk8sio-storageversion-editor appscode/internalapiserverk8sio-storageversion-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/internalapiserverk8sio-storageversion-editor --version=v0.24.0 +$ helm upgrade -i internalapiserverk8sio-storageversion-editor appscode/internalapiserverk8sio-storageversion-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a StorageVersion Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `internalapiserverk8sio-storageversion-editor`: ```bash -$ helm upgrade -i internalapiserverk8sio-storageversion-editor appscode/internalapiserverk8sio-storageversion-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i internalapiserverk8sio-storageversion-editor appscode/internalapiserverk8sio-storageversion-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a StorageVersion Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `internalapiserverk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i internalapiserverk8sio-storageversion-editor appscode/internalapiserverk8sio-storageversion-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=internal.apiserver.k8s.io/v1alpha1 +$ helm upgrade -i internalapiserverk8sio-storageversion-editor appscode/internalapiserverk8sio-storageversion-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=internal.apiserver.k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i internalapiserverk8sio-storageversion-editor appscode/internalapiserverk8sio-storageversion-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i internalapiserverk8sio-storageversion-editor appscode/internalapiserverk8sio-storageversion-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/ipamclusterxk8sio-ipaddress-editor/Chart.yaml b/charts/ipamclusterxk8sio-ipaddress-editor/Chart.yaml index ddf90984c0..422b164352 100644 --- a/charts/ipamclusterxk8sio-ipaddress-editor/Chart.yaml +++ b/charts/ipamclusterxk8sio-ipaddress-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ipam.cluster.x-k8s.io","version":"v1beta1","resource":"ipaddresses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: IPAddress Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ipamclusterxk8sio-ipaddress-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/ipamclusterxk8sio-ipaddress-editor/README.md b/charts/ipamclusterxk8sio-ipaddress-editor/README.md index 0fee950aea..402863bb01 100644 --- a/charts/ipamclusterxk8sio-ipaddress-editor/README.md +++ b/charts/ipamclusterxk8sio-ipaddress-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ipamclusterxk8sio-ipaddress-editor --version=v0.23.0 -$ helm upgrade -i ipamclusterxk8sio-ipaddress-editor appscode/ipamclusterxk8sio-ipaddress-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/ipamclusterxk8sio-ipaddress-editor --version=v0.24.0 +$ helm upgrade -i ipamclusterxk8sio-ipaddress-editor appscode/ipamclusterxk8sio-ipaddress-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a IPAddress Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `ipamclusterxk8sio-ipaddress-editor`: ```bash -$ helm upgrade -i ipamclusterxk8sio-ipaddress-editor appscode/ipamclusterxk8sio-ipaddress-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i ipamclusterxk8sio-ipaddress-editor appscode/ipamclusterxk8sio-ipaddress-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a IPAddress Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ipamclusterxk8sio- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ipamclusterxk8sio-ipaddress-editor appscode/ipamclusterxk8sio-ipaddress-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ipam.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i ipamclusterxk8sio-ipaddress-editor appscode/ipamclusterxk8sio-ipaddress-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ipam.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ipamclusterxk8sio-ipaddress-editor appscode/ipamclusterxk8sio-ipaddress-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i ipamclusterxk8sio-ipaddress-editor appscode/ipamclusterxk8sio-ipaddress-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/ipamclusterxk8sio-ipaddressclaim-editor/Chart.yaml b/charts/ipamclusterxk8sio-ipaddressclaim-editor/Chart.yaml index ecaa2fa0bb..71c5a8555a 100644 --- a/charts/ipamclusterxk8sio-ipaddressclaim-editor/Chart.yaml +++ b/charts/ipamclusterxk8sio-ipaddressclaim-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ipam.cluster.x-k8s.io","version":"v1beta1","resource":"ipaddressclaims"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: IPAddressClaim Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: ipamclusterxk8sio-ipaddressclaim-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/ipamclusterxk8sio-ipaddressclaim-editor/README.md b/charts/ipamclusterxk8sio-ipaddressclaim-editor/README.md index e4cc60dce8..f9300356e4 100644 --- a/charts/ipamclusterxk8sio-ipaddressclaim-editor/README.md +++ b/charts/ipamclusterxk8sio-ipaddressclaim-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/ipamclusterxk8sio-ipaddressclaim-editor --version=v0.23.0 -$ helm upgrade -i ipamclusterxk8sio-ipaddressclaim-editor appscode/ipamclusterxk8sio-ipaddressclaim-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/ipamclusterxk8sio-ipaddressclaim-editor --version=v0.24.0 +$ helm upgrade -i ipamclusterxk8sio-ipaddressclaim-editor appscode/ipamclusterxk8sio-ipaddressclaim-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a IPAddressClaim Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `ipamclusterxk8sio-ipaddressclaim-editor`: ```bash -$ helm upgrade -i ipamclusterxk8sio-ipaddressclaim-editor appscode/ipamclusterxk8sio-ipaddressclaim-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i ipamclusterxk8sio-ipaddressclaim-editor appscode/ipamclusterxk8sio-ipaddressclaim-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a IPAddressClaim Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `ipamclusterxk8sio- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i ipamclusterxk8sio-ipaddressclaim-editor appscode/ipamclusterxk8sio-ipaddressclaim-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ipam.cluster.x-k8s.io/v1beta1 +$ helm upgrade -i ipamclusterxk8sio-ipaddressclaim-editor appscode/ipamclusterxk8sio-ipaddressclaim-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ipam.cluster.x-k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i ipamclusterxk8sio-ipaddressclaim-editor appscode/ipamclusterxk8sio-ipaddressclaim-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i ipamclusterxk8sio-ipaddressclaim-editor appscode/ipamclusterxk8sio-ipaddressclaim-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kafkaawskubedbcom-cluster-editor/Chart.yaml b/charts/kafkaawskubedbcom-cluster-editor/Chart.yaml index 4709af980c..882460b6cf 100644 --- a/charts/kafkaawskubedbcom-cluster-editor/Chart.yaml +++ b/charts/kafkaawskubedbcom-cluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kafka.aws.kubedb.com","version":"v1alpha1","resource":"clusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Cluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kafkaawskubedbcom-cluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kafkaawskubedbcom-cluster-editor/README.md b/charts/kafkaawskubedbcom-cluster-editor/README.md index f1b94bbcc3..1241a89cc1 100644 --- a/charts/kafkaawskubedbcom-cluster-editor/README.md +++ b/charts/kafkaawskubedbcom-cluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kafkaawskubedbcom-cluster-editor --version=v0.23.0 -$ helm upgrade -i kafkaawskubedbcom-cluster-editor appscode/kafkaawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kafkaawskubedbcom-cluster-editor --version=v0.24.0 +$ helm upgrade -i kafkaawskubedbcom-cluster-editor appscode/kafkaawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cluster Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `kafkaawskubedbcom-cluster-editor`: ```bash -$ helm upgrade -i kafkaawskubedbcom-cluster-editor appscode/kafkaawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kafkaawskubedbcom-cluster-editor appscode/kafkaawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Cluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kafkaawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kafkaawskubedbcom-cluster-editor appscode/kafkaawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=kafka.aws.kubedb.com/v1alpha1 +$ helm upgrade -i kafkaawskubedbcom-cluster-editor appscode/kafkaawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=kafka.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kafkaawskubedbcom-cluster-editor appscode/kafkaawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kafkaawskubedbcom-cluster-editor appscode/kafkaawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kafkaawskubedbcom-configuration-editor/Chart.yaml b/charts/kafkaawskubedbcom-configuration-editor/Chart.yaml index 7873340298..c5cf5bb16a 100644 --- a/charts/kafkaawskubedbcom-configuration-editor/Chart.yaml +++ b/charts/kafkaawskubedbcom-configuration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kafka.aws.kubedb.com","version":"v1alpha1","resource":"configurations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Configuration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kafkaawskubedbcom-configuration-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kafkaawskubedbcom-configuration-editor/README.md b/charts/kafkaawskubedbcom-configuration-editor/README.md index 017251a2be..18b27e60f4 100644 --- a/charts/kafkaawskubedbcom-configuration-editor/README.md +++ b/charts/kafkaawskubedbcom-configuration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kafkaawskubedbcom-configuration-editor --version=v0.23.0 -$ helm upgrade -i kafkaawskubedbcom-configuration-editor appscode/kafkaawskubedbcom-configuration-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kafkaawskubedbcom-configuration-editor --version=v0.24.0 +$ helm upgrade -i kafkaawskubedbcom-configuration-editor appscode/kafkaawskubedbcom-configuration-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Configuration Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `kafkaawskubedbcom-configuration-editor`: ```bash -$ helm upgrade -i kafkaawskubedbcom-configuration-editor appscode/kafkaawskubedbcom-configuration-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kafkaawskubedbcom-configuration-editor appscode/kafkaawskubedbcom-configuration-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Configuration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kafkaawskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kafkaawskubedbcom-configuration-editor appscode/kafkaawskubedbcom-configuration-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=kafka.aws.kubedb.com/v1alpha1 +$ helm upgrade -i kafkaawskubedbcom-configuration-editor appscode/kafkaawskubedbcom-configuration-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=kafka.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kafkaawskubedbcom-configuration-editor appscode/kafkaawskubedbcom-configuration-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kafkaawskubedbcom-configuration-editor appscode/kafkaawskubedbcom-configuration-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kafkakubedbcom-connectcluster-editor/Chart.yaml b/charts/kafkakubedbcom-connectcluster-editor/Chart.yaml index 92c28f9ecc..4831d22af3 100644 --- a/charts/kafkakubedbcom-connectcluster-editor/Chart.yaml +++ b/charts/kafkakubedbcom-connectcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kafka.kubedb.com","version":"v1alpha1","resource":"connectclusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ConnectCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kafkakubedbcom-connectcluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kafkakubedbcom-connectcluster-editor/README.md b/charts/kafkakubedbcom-connectcluster-editor/README.md index f43b55ba54..7f6996b82e 100644 --- a/charts/kafkakubedbcom-connectcluster-editor/README.md +++ b/charts/kafkakubedbcom-connectcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kafkakubedbcom-connectcluster-editor --version=v0.23.0 -$ helm upgrade -i kafkakubedbcom-connectcluster-editor appscode/kafkakubedbcom-connectcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kafkakubedbcom-connectcluster-editor --version=v0.24.0 +$ helm upgrade -i kafkakubedbcom-connectcluster-editor appscode/kafkakubedbcom-connectcluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ConnectCluster Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `kafkakubedbcom-connectcluster-editor`: ```bash -$ helm upgrade -i kafkakubedbcom-connectcluster-editor appscode/kafkakubedbcom-connectcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kafkakubedbcom-connectcluster-editor appscode/kafkakubedbcom-connectcluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ConnectCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kafkakubedbcom-con Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kafkakubedbcom-connectcluster-editor appscode/kafkakubedbcom-connectcluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=kafka.kubedb.com/v1alpha1 +$ helm upgrade -i kafkakubedbcom-connectcluster-editor appscode/kafkakubedbcom-connectcluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=kafka.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kafkakubedbcom-connectcluster-editor appscode/kafkakubedbcom-connectcluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kafkakubedbcom-connectcluster-editor appscode/kafkakubedbcom-connectcluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kafkakubedbcom-connector-editor/Chart.yaml b/charts/kafkakubedbcom-connector-editor/Chart.yaml index d2b0406e43..c1a0376789 100644 --- a/charts/kafkakubedbcom-connector-editor/Chart.yaml +++ b/charts/kafkakubedbcom-connector-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kafka.kubedb.com","version":"v1alpha1","resource":"connectors"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Connector Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kafkakubedbcom-connector-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kafkakubedbcom-connector-editor/README.md b/charts/kafkakubedbcom-connector-editor/README.md index f0f20153a0..209c64da42 100644 --- a/charts/kafkakubedbcom-connector-editor/README.md +++ b/charts/kafkakubedbcom-connector-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kafkakubedbcom-connector-editor --version=v0.23.0 -$ helm upgrade -i kafkakubedbcom-connector-editor appscode/kafkakubedbcom-connector-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kafkakubedbcom-connector-editor --version=v0.24.0 +$ helm upgrade -i kafkakubedbcom-connector-editor appscode/kafkakubedbcom-connector-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Connector Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `kafkakubedbcom-connector-editor`: ```bash -$ helm upgrade -i kafkakubedbcom-connector-editor appscode/kafkakubedbcom-connector-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kafkakubedbcom-connector-editor appscode/kafkakubedbcom-connector-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Connector Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kafkakubedbcom-con Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kafkakubedbcom-connector-editor appscode/kafkakubedbcom-connector-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=kafka.kubedb.com/v1alpha1 +$ helm upgrade -i kafkakubedbcom-connector-editor appscode/kafkakubedbcom-connector-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=kafka.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kafkakubedbcom-connector-editor appscode/kafkakubedbcom-connector-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kafkakubedbcom-connector-editor appscode/kafkakubedbcom-connector-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kafkakubedbcom-restproxy-editor/Chart.yaml b/charts/kafkakubedbcom-restproxy-editor/Chart.yaml index 918b1989ef..910c107a36 100644 --- a/charts/kafkakubedbcom-restproxy-editor/Chart.yaml +++ b/charts/kafkakubedbcom-restproxy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kafka.kubedb.com","version":"v1alpha1","resource":"restproxies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RestProxy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kafkakubedbcom-restproxy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kafkakubedbcom-restproxy-editor/README.md b/charts/kafkakubedbcom-restproxy-editor/README.md index da570aae39..4ea4624bd5 100644 --- a/charts/kafkakubedbcom-restproxy-editor/README.md +++ b/charts/kafkakubedbcom-restproxy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kafkakubedbcom-restproxy-editor --version=v0.23.0 -$ helm upgrade -i kafkakubedbcom-restproxy-editor appscode/kafkakubedbcom-restproxy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kafkakubedbcom-restproxy-editor --version=v0.24.0 +$ helm upgrade -i kafkakubedbcom-restproxy-editor appscode/kafkakubedbcom-restproxy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RestProxy Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `kafkakubedbcom-restproxy-editor`: ```bash -$ helm upgrade -i kafkakubedbcom-restproxy-editor appscode/kafkakubedbcom-restproxy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kafkakubedbcom-restproxy-editor appscode/kafkakubedbcom-restproxy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RestProxy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kafkakubedbcom-res Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kafkakubedbcom-restproxy-editor appscode/kafkakubedbcom-restproxy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=kafka.kubedb.com/v1alpha1 +$ helm upgrade -i kafkakubedbcom-restproxy-editor appscode/kafkakubedbcom-restproxy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=kafka.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kafkakubedbcom-restproxy-editor appscode/kafkakubedbcom-restproxy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kafkakubedbcom-restproxy-editor appscode/kafkakubedbcom-restproxy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kafkakubedbcom-schemaregistry-editor/Chart.yaml b/charts/kafkakubedbcom-schemaregistry-editor/Chart.yaml index 080dbe0b25..ce6cf4ec93 100644 --- a/charts/kafkakubedbcom-schemaregistry-editor/Chart.yaml +++ b/charts/kafkakubedbcom-schemaregistry-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kafka.kubedb.com","version":"v1alpha1","resource":"schemaregistries"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SchemaRegistry Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kafkakubedbcom-schemaregistry-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kafkakubedbcom-schemaregistry-editor/README.md b/charts/kafkakubedbcom-schemaregistry-editor/README.md index 98892f5b7c..151126d7fa 100644 --- a/charts/kafkakubedbcom-schemaregistry-editor/README.md +++ b/charts/kafkakubedbcom-schemaregistry-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kafkakubedbcom-schemaregistry-editor --version=v0.23.0 -$ helm upgrade -i kafkakubedbcom-schemaregistry-editor appscode/kafkakubedbcom-schemaregistry-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kafkakubedbcom-schemaregistry-editor --version=v0.24.0 +$ helm upgrade -i kafkakubedbcom-schemaregistry-editor appscode/kafkakubedbcom-schemaregistry-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SchemaRegistry Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `kafkakubedbcom-schemaregistry-editor`: ```bash -$ helm upgrade -i kafkakubedbcom-schemaregistry-editor appscode/kafkakubedbcom-schemaregistry-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kafkakubedbcom-schemaregistry-editor appscode/kafkakubedbcom-schemaregistry-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SchemaRegistry Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kafkakubedbcom-sch Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kafkakubedbcom-schemaregistry-editor appscode/kafkakubedbcom-schemaregistry-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=kafka.kubedb.com/v1alpha1 +$ helm upgrade -i kafkakubedbcom-schemaregistry-editor appscode/kafkakubedbcom-schemaregistry-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=kafka.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kafkakubedbcom-schemaregistry-editor appscode/kafkakubedbcom-schemaregistry-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kafkakubedbcom-schemaregistry-editor appscode/kafkakubedbcom-schemaregistry-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/karpenterazurecom-aksnodeclass-editor/Chart.yaml b/charts/karpenterazurecom-aksnodeclass-editor/Chart.yaml index da789ce56e..696138196e 100644 --- a/charts/karpenterazurecom-aksnodeclass-editor/Chart.yaml +++ b/charts/karpenterazurecom-aksnodeclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"karpenter.azure.com","version":"v1alpha2","resource":"aksnodeclasses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AKSNodeClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: karpenterazurecom-aksnodeclass-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/karpenterazurecom-aksnodeclass-editor/README.md b/charts/karpenterazurecom-aksnodeclass-editor/README.md index 726e3832e9..0f7694a221 100644 --- a/charts/karpenterazurecom-aksnodeclass-editor/README.md +++ b/charts/karpenterazurecom-aksnodeclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/karpenterazurecom-aksnodeclass-editor --version=v0.23.0 -$ helm upgrade -i karpenterazurecom-aksnodeclass-editor appscode/karpenterazurecom-aksnodeclass-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/karpenterazurecom-aksnodeclass-editor --version=v0.24.0 +$ helm upgrade -i karpenterazurecom-aksnodeclass-editor appscode/karpenterazurecom-aksnodeclass-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AKSNodeClass Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `karpenterazurecom-aksnodeclass-editor`: ```bash -$ helm upgrade -i karpenterazurecom-aksnodeclass-editor appscode/karpenterazurecom-aksnodeclass-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i karpenterazurecom-aksnodeclass-editor appscode/karpenterazurecom-aksnodeclass-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AKSNodeClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `karpenterazurecom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i karpenterazurecom-aksnodeclass-editor appscode/karpenterazurecom-aksnodeclass-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=karpenter.azure.com/v1alpha2 +$ helm upgrade -i karpenterazurecom-aksnodeclass-editor appscode/karpenterazurecom-aksnodeclass-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=karpenter.azure.com/v1alpha2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i karpenterazurecom-aksnodeclass-editor appscode/karpenterazurecom-aksnodeclass-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i karpenterazurecom-aksnodeclass-editor appscode/karpenterazurecom-aksnodeclass-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/karpenterk8saws-ec2nodeclass-editor/Chart.yaml b/charts/karpenterk8saws-ec2nodeclass-editor/Chart.yaml index b1f1217523..7c5d73614d 100644 --- a/charts/karpenterk8saws-ec2nodeclass-editor/Chart.yaml +++ b/charts/karpenterk8saws-ec2nodeclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"karpenter.k8s.aws","version":"v1beta1","resource":"ec2nodeclasses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: EC2NodeClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: karpenterk8saws-ec2nodeclass-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/karpenterk8saws-ec2nodeclass-editor/README.md b/charts/karpenterk8saws-ec2nodeclass-editor/README.md index 17b38ec4cb..02670aa96f 100644 --- a/charts/karpenterk8saws-ec2nodeclass-editor/README.md +++ b/charts/karpenterk8saws-ec2nodeclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/karpenterk8saws-ec2nodeclass-editor --version=v0.23.0 -$ helm upgrade -i karpenterk8saws-ec2nodeclass-editor appscode/karpenterk8saws-ec2nodeclass-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/karpenterk8saws-ec2nodeclass-editor --version=v0.24.0 +$ helm upgrade -i karpenterk8saws-ec2nodeclass-editor appscode/karpenterk8saws-ec2nodeclass-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EC2NodeClass Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `karpenterk8saws-ec2nodeclass-editor`: ```bash -$ helm upgrade -i karpenterk8saws-ec2nodeclass-editor appscode/karpenterk8saws-ec2nodeclass-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i karpenterk8saws-ec2nodeclass-editor appscode/karpenterk8saws-ec2nodeclass-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a EC2NodeClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `karpenterk8saws-ec Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i karpenterk8saws-ec2nodeclass-editor appscode/karpenterk8saws-ec2nodeclass-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=karpenter.k8s.aws/v1beta1 +$ helm upgrade -i karpenterk8saws-ec2nodeclass-editor appscode/karpenterk8saws-ec2nodeclass-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=karpenter.k8s.aws/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i karpenterk8saws-ec2nodeclass-editor appscode/karpenterk8saws-ec2nodeclass-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i karpenterk8saws-ec2nodeclass-editor appscode/karpenterk8saws-ec2nodeclass-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/karpentersh-nodeclaim-editor/Chart.yaml b/charts/karpentersh-nodeclaim-editor/Chart.yaml index dda4250e4f..7fd5433ed2 100644 --- a/charts/karpentersh-nodeclaim-editor/Chart.yaml +++ b/charts/karpentersh-nodeclaim-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"karpenter.sh","version":"v1beta1","resource":"nodeclaims"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: NodeClaim Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: karpentersh-nodeclaim-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/karpentersh-nodeclaim-editor/README.md b/charts/karpentersh-nodeclaim-editor/README.md index 9eeb1b782d..942350e488 100644 --- a/charts/karpentersh-nodeclaim-editor/README.md +++ b/charts/karpentersh-nodeclaim-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/karpentersh-nodeclaim-editor --version=v0.23.0 -$ helm upgrade -i karpentersh-nodeclaim-editor appscode/karpentersh-nodeclaim-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/karpentersh-nodeclaim-editor --version=v0.24.0 +$ helm upgrade -i karpentersh-nodeclaim-editor appscode/karpentersh-nodeclaim-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a NodeClaim Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `karpentersh-nodeclaim-editor`: ```bash -$ helm upgrade -i karpentersh-nodeclaim-editor appscode/karpentersh-nodeclaim-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i karpentersh-nodeclaim-editor appscode/karpentersh-nodeclaim-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a NodeClaim Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `karpentersh-nodecl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i karpentersh-nodeclaim-editor appscode/karpentersh-nodeclaim-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=karpenter.sh/v1beta1 +$ helm upgrade -i karpentersh-nodeclaim-editor appscode/karpentersh-nodeclaim-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=karpenter.sh/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i karpentersh-nodeclaim-editor appscode/karpentersh-nodeclaim-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i karpentersh-nodeclaim-editor appscode/karpentersh-nodeclaim-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/karpentersh-nodepool-editor/Chart.yaml b/charts/karpentersh-nodepool-editor/Chart.yaml index 2936055f89..5dafc6918f 100644 --- a/charts/karpentersh-nodepool-editor/Chart.yaml +++ b/charts/karpentersh-nodepool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"karpenter.sh","version":"v1beta1","resource":"nodepools"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: NodePool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: karpentersh-nodepool-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/karpentersh-nodepool-editor/README.md b/charts/karpentersh-nodepool-editor/README.md index 9fb27cc7b5..bb0b6e3e1a 100644 --- a/charts/karpentersh-nodepool-editor/README.md +++ b/charts/karpentersh-nodepool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/karpentersh-nodepool-editor --version=v0.23.0 -$ helm upgrade -i karpentersh-nodepool-editor appscode/karpentersh-nodepool-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/karpentersh-nodepool-editor --version=v0.24.0 +$ helm upgrade -i karpentersh-nodepool-editor appscode/karpentersh-nodepool-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a NodePool Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `karpentersh-nodepool-editor`: ```bash -$ helm upgrade -i karpentersh-nodepool-editor appscode/karpentersh-nodepool-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i karpentersh-nodepool-editor appscode/karpentersh-nodepool-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a NodePool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `karpentersh-nodepo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i karpentersh-nodepool-editor appscode/karpentersh-nodepool-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=karpenter.sh/v1beta1 +$ helm upgrade -i karpentersh-nodepool-editor appscode/karpentersh-nodepool-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=karpenter.sh/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i karpentersh-nodepool-editor appscode/karpentersh-nodepool-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i karpentersh-nodepool-editor appscode/karpentersh-nodepool-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/keyvaultazurekubedbcom-key-editor/Chart.yaml b/charts/keyvaultazurekubedbcom-key-editor/Chart.yaml index 65c38a0c7d..35102a3547 100644 --- a/charts/keyvaultazurekubedbcom-key-editor/Chart.yaml +++ b/charts/keyvaultazurekubedbcom-key-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"keyvault.azure.kubedb.com","version":"v1alpha1","resource":"keys"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Key Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: keyvaultazurekubedbcom-key-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/keyvaultazurekubedbcom-key-editor/README.md b/charts/keyvaultazurekubedbcom-key-editor/README.md index f6ffa12dc6..e5aa769845 100644 --- a/charts/keyvaultazurekubedbcom-key-editor/README.md +++ b/charts/keyvaultazurekubedbcom-key-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/keyvaultazurekubedbcom-key-editor --version=v0.23.0 -$ helm upgrade -i keyvaultazurekubedbcom-key-editor appscode/keyvaultazurekubedbcom-key-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/keyvaultazurekubedbcom-key-editor --version=v0.24.0 +$ helm upgrade -i keyvaultazurekubedbcom-key-editor appscode/keyvaultazurekubedbcom-key-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Key Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `keyvaultazurekubedbcom-key-editor`: ```bash -$ helm upgrade -i keyvaultazurekubedbcom-key-editor appscode/keyvaultazurekubedbcom-key-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i keyvaultazurekubedbcom-key-editor appscode/keyvaultazurekubedbcom-key-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Key Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `keyvaultazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i keyvaultazurekubedbcom-key-editor appscode/keyvaultazurekubedbcom-key-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=keyvault.azure.kubedb.com/v1alpha1 +$ helm upgrade -i keyvaultazurekubedbcom-key-editor appscode/keyvaultazurekubedbcom-key-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=keyvault.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i keyvaultazurekubedbcom-key-editor appscode/keyvaultazurekubedbcom-key-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i keyvaultazurekubedbcom-key-editor appscode/keyvaultazurekubedbcom-key-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/keyvaultazurekubedbcom-vault-editor/Chart.yaml b/charts/keyvaultazurekubedbcom-vault-editor/Chart.yaml index 86c65df818..b167c6f980 100644 --- a/charts/keyvaultazurekubedbcom-vault-editor/Chart.yaml +++ b/charts/keyvaultazurekubedbcom-vault-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"keyvault.azure.kubedb.com","version":"v1alpha1","resource":"vaults"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Vault Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: keyvaultazurekubedbcom-vault-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/keyvaultazurekubedbcom-vault-editor/README.md b/charts/keyvaultazurekubedbcom-vault-editor/README.md index 90cc7af84a..5ef13d60f1 100644 --- a/charts/keyvaultazurekubedbcom-vault-editor/README.md +++ b/charts/keyvaultazurekubedbcom-vault-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/keyvaultazurekubedbcom-vault-editor --version=v0.23.0 -$ helm upgrade -i keyvaultazurekubedbcom-vault-editor appscode/keyvaultazurekubedbcom-vault-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/keyvaultazurekubedbcom-vault-editor --version=v0.24.0 +$ helm upgrade -i keyvaultazurekubedbcom-vault-editor appscode/keyvaultazurekubedbcom-vault-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Vault Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `keyvaultazurekubedbcom-vault-editor`: ```bash -$ helm upgrade -i keyvaultazurekubedbcom-vault-editor appscode/keyvaultazurekubedbcom-vault-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i keyvaultazurekubedbcom-vault-editor appscode/keyvaultazurekubedbcom-vault-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Vault Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `keyvaultazurekubed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i keyvaultazurekubedbcom-vault-editor appscode/keyvaultazurekubedbcom-vault-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=keyvault.azure.kubedb.com/v1alpha1 +$ helm upgrade -i keyvaultazurekubedbcom-vault-editor appscode/keyvaultazurekubedbcom-vault-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=keyvault.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i keyvaultazurekubedbcom-vault-editor appscode/keyvaultazurekubedbcom-vault-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i keyvaultazurekubedbcom-vault-editor appscode/keyvaultazurekubedbcom-vault-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kinesisawskubedbcom-stream-editor/Chart.yaml b/charts/kinesisawskubedbcom-stream-editor/Chart.yaml index 31b8dd3c92..9322858900 100644 --- a/charts/kinesisawskubedbcom-stream-editor/Chart.yaml +++ b/charts/kinesisawskubedbcom-stream-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kinesis.aws.kubedb.com","version":"v1alpha1","resource":"streams"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Stream Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kinesisawskubedbcom-stream-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kinesisawskubedbcom-stream-editor/README.md b/charts/kinesisawskubedbcom-stream-editor/README.md index 29adce2151..f85667da45 100644 --- a/charts/kinesisawskubedbcom-stream-editor/README.md +++ b/charts/kinesisawskubedbcom-stream-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kinesisawskubedbcom-stream-editor --version=v0.23.0 -$ helm upgrade -i kinesisawskubedbcom-stream-editor appscode/kinesisawskubedbcom-stream-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kinesisawskubedbcom-stream-editor --version=v0.24.0 +$ helm upgrade -i kinesisawskubedbcom-stream-editor appscode/kinesisawskubedbcom-stream-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Stream Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `kinesisawskubedbcom-stream-editor`: ```bash -$ helm upgrade -i kinesisawskubedbcom-stream-editor appscode/kinesisawskubedbcom-stream-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kinesisawskubedbcom-stream-editor appscode/kinesisawskubedbcom-stream-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Stream Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kinesisawskubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kinesisawskubedbcom-stream-editor appscode/kinesisawskubedbcom-stream-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=kinesis.aws.kubedb.com/v1alpha1 +$ helm upgrade -i kinesisawskubedbcom-stream-editor appscode/kinesisawskubedbcom-stream-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=kinesis.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kinesisawskubedbcom-stream-editor appscode/kinesisawskubedbcom-stream-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kinesisawskubedbcom-stream-editor appscode/kinesisawskubedbcom-stream-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kmsawskubedbcom-key-editor/Chart.yaml b/charts/kmsawskubedbcom-key-editor/Chart.yaml index 4fe6b4b875..c47655878a 100644 --- a/charts/kmsawskubedbcom-key-editor/Chart.yaml +++ b/charts/kmsawskubedbcom-key-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kms.aws.kubedb.com","version":"v1alpha1","resource":"keys"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Key Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kmsawskubedbcom-key-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kmsawskubedbcom-key-editor/README.md b/charts/kmsawskubedbcom-key-editor/README.md index bdb2c8bc5d..4a5f8ebe44 100644 --- a/charts/kmsawskubedbcom-key-editor/README.md +++ b/charts/kmsawskubedbcom-key-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kmsawskubedbcom-key-editor --version=v0.23.0 -$ helm upgrade -i kmsawskubedbcom-key-editor appscode/kmsawskubedbcom-key-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kmsawskubedbcom-key-editor --version=v0.24.0 +$ helm upgrade -i kmsawskubedbcom-key-editor appscode/kmsawskubedbcom-key-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Key Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `kmsawskubedbcom-key-editor`: ```bash -$ helm upgrade -i kmsawskubedbcom-key-editor appscode/kmsawskubedbcom-key-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kmsawskubedbcom-key-editor appscode/kmsawskubedbcom-key-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Key Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kmsawskubedbcom-ke Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kmsawskubedbcom-key-editor appscode/kmsawskubedbcom-key-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=kms.aws.kubedb.com/v1alpha1 +$ helm upgrade -i kmsawskubedbcom-key-editor appscode/kmsawskubedbcom-key-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=kms.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kmsawskubedbcom-key-editor appscode/kmsawskubedbcom-key-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kmsawskubedbcom-key-editor appscode/kmsawskubedbcom-key-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubebindappscodecom-apiservicebinding-editor/Chart.yaml b/charts/kubebindappscodecom-apiservicebinding-editor/Chart.yaml index 12e8b3daa0..429a6f7054 100644 --- a/charts/kubebindappscodecom-apiservicebinding-editor/Chart.yaml +++ b/charts/kubebindappscodecom-apiservicebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kube-bind.appscode.com","version":"v1alpha1","resource":"apiservicebindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: APIServiceBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kubebindappscodecom-apiservicebinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubebindappscodecom-apiservicebinding-editor/README.md b/charts/kubebindappscodecom-apiservicebinding-editor/README.md index d79989c21f..0597e4e969 100644 --- a/charts/kubebindappscodecom-apiservicebinding-editor/README.md +++ b/charts/kubebindappscodecom-apiservicebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubebindappscodecom-apiservicebinding-editor --version=v0.23.0 -$ helm upgrade -i kubebindappscodecom-apiservicebinding-editor appscode/kubebindappscodecom-apiservicebinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubebindappscodecom-apiservicebinding-editor --version=v0.24.0 +$ helm upgrade -i kubebindappscodecom-apiservicebinding-editor appscode/kubebindappscodecom-apiservicebinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a APIServiceBinding Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `kubebindappscodecom-apiservicebinding-editor`: ```bash -$ helm upgrade -i kubebindappscodecom-apiservicebinding-editor appscode/kubebindappscodecom-apiservicebinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubebindappscodecom-apiservicebinding-editor appscode/kubebindappscodecom-apiservicebinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a APIServiceBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kubebindappscodeco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubebindappscodecom-apiservicebinding-editor appscode/kubebindappscodecom-apiservicebinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 +$ helm upgrade -i kubebindappscodecom-apiservicebinding-editor appscode/kubebindappscodecom-apiservicebinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubebindappscodecom-apiservicebinding-editor appscode/kubebindappscodecom-apiservicebinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubebindappscodecom-apiservicebinding-editor appscode/kubebindappscodecom-apiservicebinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubebindappscodecom-apiserviceexport-editor/Chart.yaml b/charts/kubebindappscodecom-apiserviceexport-editor/Chart.yaml index 4e572905ff..ea814e14ee 100644 --- a/charts/kubebindappscodecom-apiserviceexport-editor/Chart.yaml +++ b/charts/kubebindappscodecom-apiserviceexport-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kube-bind.appscode.com","version":"v1alpha1","resource":"apiserviceexports"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: APIServiceExport Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kubebindappscodecom-apiserviceexport-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubebindappscodecom-apiserviceexport-editor/README.md b/charts/kubebindappscodecom-apiserviceexport-editor/README.md index 7b5bef7795..c8b4b72fc2 100644 --- a/charts/kubebindappscodecom-apiserviceexport-editor/README.md +++ b/charts/kubebindappscodecom-apiserviceexport-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubebindappscodecom-apiserviceexport-editor --version=v0.23.0 -$ helm upgrade -i kubebindappscodecom-apiserviceexport-editor appscode/kubebindappscodecom-apiserviceexport-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubebindappscodecom-apiserviceexport-editor --version=v0.24.0 +$ helm upgrade -i kubebindappscodecom-apiserviceexport-editor appscode/kubebindappscodecom-apiserviceexport-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a APIServiceExport Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `kubebindappscodecom-apiserviceexport-editor`: ```bash -$ helm upgrade -i kubebindappscodecom-apiserviceexport-editor appscode/kubebindappscodecom-apiserviceexport-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubebindappscodecom-apiserviceexport-editor appscode/kubebindappscodecom-apiserviceexport-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a APIServiceExport Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kubebindappscodeco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubebindappscodecom-apiserviceexport-editor appscode/kubebindappscodecom-apiserviceexport-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 +$ helm upgrade -i kubebindappscodecom-apiserviceexport-editor appscode/kubebindappscodecom-apiserviceexport-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubebindappscodecom-apiserviceexport-editor appscode/kubebindappscodecom-apiserviceexport-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubebindappscodecom-apiserviceexport-editor appscode/kubebindappscodecom-apiserviceexport-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubebindappscodecom-apiserviceexportrequest-editor/Chart.yaml b/charts/kubebindappscodecom-apiserviceexportrequest-editor/Chart.yaml index f16e8cc619..6598c2f19c 100644 --- a/charts/kubebindappscodecom-apiserviceexportrequest-editor/Chart.yaml +++ b/charts/kubebindappscodecom-apiserviceexportrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kube-bind.appscode.com","version":"v1alpha1","resource":"apiserviceexportrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: APIServiceExportRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kubebindappscodecom-apiserviceexportrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubebindappscodecom-apiserviceexportrequest-editor/README.md b/charts/kubebindappscodecom-apiserviceexportrequest-editor/README.md index d314f857f0..080c82e5c0 100644 --- a/charts/kubebindappscodecom-apiserviceexportrequest-editor/README.md +++ b/charts/kubebindappscodecom-apiserviceexportrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubebindappscodecom-apiserviceexportrequest-editor --version=v0.23.0 -$ helm upgrade -i kubebindappscodecom-apiserviceexportrequest-editor appscode/kubebindappscodecom-apiserviceexportrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubebindappscodecom-apiserviceexportrequest-editor --version=v0.24.0 +$ helm upgrade -i kubebindappscodecom-apiserviceexportrequest-editor appscode/kubebindappscodecom-apiserviceexportrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a APIServiceExportRequest Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `kubebindappscodecom-apiserviceexportrequest-editor`: ```bash -$ helm upgrade -i kubebindappscodecom-apiserviceexportrequest-editor appscode/kubebindappscodecom-apiserviceexportrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubebindappscodecom-apiserviceexportrequest-editor appscode/kubebindappscodecom-apiserviceexportrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a APIServiceExportRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kubebindappscodeco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubebindappscodecom-apiserviceexportrequest-editor appscode/kubebindappscodecom-apiserviceexportrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 +$ helm upgrade -i kubebindappscodecom-apiserviceexportrequest-editor appscode/kubebindappscodecom-apiserviceexportrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubebindappscodecom-apiserviceexportrequest-editor appscode/kubebindappscodecom-apiserviceexportrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubebindappscodecom-apiserviceexportrequest-editor appscode/kubebindappscodecom-apiserviceexportrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubebindappscodecom-apiservicenamespace-editor/Chart.yaml b/charts/kubebindappscodecom-apiservicenamespace-editor/Chart.yaml index f8c39e1e3d..f5d89ce463 100644 --- a/charts/kubebindappscodecom-apiservicenamespace-editor/Chart.yaml +++ b/charts/kubebindappscodecom-apiservicenamespace-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kube-bind.appscode.com","version":"v1alpha1","resource":"apiservicenamespaces"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: APIServiceNamespace Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kubebindappscodecom-apiservicenamespace-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubebindappscodecom-apiservicenamespace-editor/README.md b/charts/kubebindappscodecom-apiservicenamespace-editor/README.md index a9f9dddd74..48577d67cf 100644 --- a/charts/kubebindappscodecom-apiservicenamespace-editor/README.md +++ b/charts/kubebindappscodecom-apiservicenamespace-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubebindappscodecom-apiservicenamespace-editor --version=v0.23.0 -$ helm upgrade -i kubebindappscodecom-apiservicenamespace-editor appscode/kubebindappscodecom-apiservicenamespace-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubebindappscodecom-apiservicenamespace-editor --version=v0.24.0 +$ helm upgrade -i kubebindappscodecom-apiservicenamespace-editor appscode/kubebindappscodecom-apiservicenamespace-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a APIServiceNamespace Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `kubebindappscodecom-apiservicenamespace-editor`: ```bash -$ helm upgrade -i kubebindappscodecom-apiservicenamespace-editor appscode/kubebindappscodecom-apiservicenamespace-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubebindappscodecom-apiservicenamespace-editor appscode/kubebindappscodecom-apiservicenamespace-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a APIServiceNamespace Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kubebindappscodeco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubebindappscodecom-apiservicenamespace-editor appscode/kubebindappscodecom-apiservicenamespace-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 +$ helm upgrade -i kubebindappscodecom-apiservicenamespace-editor appscode/kubebindappscodecom-apiservicenamespace-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubebindappscodecom-apiservicenamespace-editor appscode/kubebindappscodecom-apiservicenamespace-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubebindappscodecom-apiservicenamespace-editor appscode/kubebindappscodecom-apiservicenamespace-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubebindappscodecom-clusterbinding-editor/Chart.yaml b/charts/kubebindappscodecom-clusterbinding-editor/Chart.yaml index a7a1bebe10..f3015fc039 100644 --- a/charts/kubebindappscodecom-clusterbinding-editor/Chart.yaml +++ b/charts/kubebindappscodecom-clusterbinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kube-bind.appscode.com","version":"v1alpha1","resource":"clusterbindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kubebindappscodecom-clusterbinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubebindappscodecom-clusterbinding-editor/README.md b/charts/kubebindappscodecom-clusterbinding-editor/README.md index 63c7eac967..7e3a625b13 100644 --- a/charts/kubebindappscodecom-clusterbinding-editor/README.md +++ b/charts/kubebindappscodecom-clusterbinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubebindappscodecom-clusterbinding-editor --version=v0.23.0 -$ helm upgrade -i kubebindappscodecom-clusterbinding-editor appscode/kubebindappscodecom-clusterbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubebindappscodecom-clusterbinding-editor --version=v0.24.0 +$ helm upgrade -i kubebindappscodecom-clusterbinding-editor appscode/kubebindappscodecom-clusterbinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterBinding Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `kubebindappscodecom-clusterbinding-editor`: ```bash -$ helm upgrade -i kubebindappscodecom-clusterbinding-editor appscode/kubebindappscodecom-clusterbinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubebindappscodecom-clusterbinding-editor appscode/kubebindappscodecom-clusterbinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kubebindappscodeco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubebindappscodecom-clusterbinding-editor appscode/kubebindappscodecom-clusterbinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 +$ helm upgrade -i kubebindappscodecom-clusterbinding-editor appscode/kubebindappscodecom-clusterbinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=kube-bind.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubebindappscodecom-clusterbinding-editor appscode/kubebindappscodecom-clusterbinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubebindappscodecom-clusterbinding-editor appscode/kubebindappscodecom-clusterbinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-cassandra-editor-options/Chart.yaml b/charts/kubedbcom-cassandra-editor-options/Chart.yaml index 08a313bf75..1e8960a173 100644 --- a/charts/kubedbcom-cassandra-editor-options/Chart.yaml +++ b/charts/kubedbcom-cassandra-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-cassandra-editor-options description: Cassandra Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-cassandra-editor-options/README.md b/charts/kubedbcom-cassandra-editor-options/README.md index 4e062ee88b..e775668815 100644 --- a/charts/kubedbcom-cassandra-editor-options/README.md +++ b/charts/kubedbcom-cassandra-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-cassandra-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-cassandra-editor-options appscode/kubedbcom-cassandra-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-cassandra-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-cassandra-editor-options appscode/kubedbcom-cassandra-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cassandra Editor UI Options on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `kubedbcom-cassandra-editor-options`: ```bash -$ helm upgrade -i kubedbcom-cassandra-editor-options appscode/kubedbcom-cassandra-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-cassandra-editor-options appscode/kubedbcom-cassandra-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Cassandra Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -187,12 +187,12 @@ The following table lists the configurable parameters of the `kubedbcom-cassandr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-cassandra-editor-options appscode/kubedbcom-cassandra-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-cassandra-editor-options appscode/kubedbcom-cassandra-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-cassandra-editor-options appscode/kubedbcom-cassandra-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-cassandra-editor-options appscode/kubedbcom-cassandra-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-cassandra-editor/Chart.yaml b/charts/kubedbcom-cassandra-editor/Chart.yaml index 0404224e17..aa23f8b0ee 100644 --- a/charts/kubedbcom-cassandra-editor/Chart.yaml +++ b/charts/kubedbcom-cassandra-editor/Chart.yaml @@ -2,36 +2,17 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1alpha2","resource":"cassandras"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComCassandraAutoscaler,certManagerIoIssuer_ca,coreKubestashComBackupBlueprint,coreKubestashComBackupConfiguration,coreKubestashComRestoreSession,kubedbComCassandra,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: CassandraAutoscaler - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: core.kubestash.com - kind: BackupBlueprint - version: v1alpha1 - - group: core.kubestash.com - kind: BackupConfiguration - version: v1alpha1 - - group: core.kubestash.com - kind: RestoreSession - version: v1alpha1 - - group: kubedb.com - kind: Cassandra - version: v1alpha2 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: CassandraAutoscaler\n version: v1alpha1\n-\ + \ group: cert-manager.io\n kind: Issuer\n version: v1\n- group: core.kubestash.com\n\ + \ kind: BackupBlueprint\n version: v1alpha1\n- group: core.kubestash.com\n \ + \ kind: BackupConfiguration\n version: v1alpha1\n- group: core.kubestash.com\n\ + \ kind: RestoreSession\n version: v1alpha1\n- group: kubedb.com\n kind: Cassandra\n\ + \ version: v1alpha2\n- group: monitoring.coreos.com\n kind: PrometheusRule\n\ + \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ + \ v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Cassandra Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -43,4 +24,4 @@ maintainers: name: appscode name: kubedbcom-cassandra-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-cassandra-editor/README.md b/charts/kubedbcom-cassandra-editor/README.md index 09751391ed..0cec15e4c8 100644 --- a/charts/kubedbcom-cassandra-editor/README.md +++ b/charts/kubedbcom-cassandra-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-cassandra-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-cassandra-editor appscode/kubedbcom-cassandra-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-cassandra-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-cassandra-editor appscode/kubedbcom-cassandra-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cassandra Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `kubedbcom-cassandra-editor`: ```bash -$ helm upgrade -i kubedbcom-cassandra-editor appscode/kubedbcom-cassandra-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-cassandra-editor appscode/kubedbcom-cassandra-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Cassandra Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -107,12 +107,12 @@ The following table lists the configurable parameters of the `kubedbcom-cassandr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-cassandra-editor appscode/kubedbcom-cassandra-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-cassandra-editor appscode/kubedbcom-cassandra-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-cassandra-editor appscode/kubedbcom-cassandra-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-cassandra-editor appscode/kubedbcom-cassandra-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-clickhouse-editor-options/Chart.yaml b/charts/kubedbcom-clickhouse-editor-options/Chart.yaml index 7c8cd09e03..208dd69bd6 100644 --- a/charts/kubedbcom-clickhouse-editor-options/Chart.yaml +++ b/charts/kubedbcom-clickhouse-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-clickhouse-editor-options description: ClickHouse Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-clickhouse-editor-options/README.md b/charts/kubedbcom-clickhouse-editor-options/README.md index 9b6dcda178..04300b1717 100644 --- a/charts/kubedbcom-clickhouse-editor-options/README.md +++ b/charts/kubedbcom-clickhouse-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-clickhouse-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-clickhouse-editor-options appscode/kubedbcom-clickhouse-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-clickhouse-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-clickhouse-editor-options appscode/kubedbcom-clickhouse-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClickHouse Editor UI Options on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `kubedbcom-clickhouse-editor-options`: ```bash -$ helm upgrade -i kubedbcom-clickhouse-editor-options appscode/kubedbcom-clickhouse-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-clickhouse-editor-options appscode/kubedbcom-clickhouse-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a ClickHouse Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -45,107 +45,115 @@ The command removes all the Kubernetes components associated with the chart and The following table lists the configurable parameters of the `kubedbcom-clickhouse-editor-options` chart and their default values. -| Parameter | Description | Default | -|----------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------|---------------------------------------------------------------------------------------| -| metadata.resource.group | | kubedb.com | -| metadata.resource.kind | | ClickHouse | -| metadata.resource.name | | clickhouses | -| metadata.resource.scope | | Namespaced | -| metadata.resource.version | | v1alpha2 | -| metadata.release.name | Release name | "" | -| metadata.release.namespace | Release namespace | "" | -| spec.annotations | Annotations to add to the database custom resource | {} | -| spec.labels | Labels to add to all the template objects | {} | -| spec.mode | Standalone, Topology | Standalone | -| spec.topology.clickHouseKeeper.host | | clickhouse-keeper.click-keeper | -| spec.topology.clickHouseKeeper.port | | 2181 | -| spec.deletionPolicy | | WipeOut | -| spec.persistence.size | | 2Gi | -| spec.podResources.machine | | "" | -| spec.podResources.resources.requests.cpu | | 500m | -| spec.podResources.resources.requests.memory | | 1Gi | -| spec.authSecret.name | | "" | -| spec.authSecret.password | | "" | -| spec.configuration | | "" | -| spec.openshift.securityContext.runAsUser | | | -| spec.admin.deployment.default | | Shared | -| spec.admin.deployment.toggle | | true | -| spec.admin.clusterTier.default | | "GeneralPurpose" | -| spec.admin.clusterTier.toggle | | true | -| spec.admin.clusterTier.nodeTopology.available | | [] | -| spec.admin.clusterTier.nodeTopology.default | | "" | -| spec.admin.clusterTier.nodeTopology.toggle | | true | -| spec.admin.clusterTier.placement.available | | [] | -| spec.admin.clusterTier.placement.default | | "" | -| spec.admin.clusterTier.placement.toggle | | true | -| spec.admin.showPreview | | false | -| spec.admin.leftPanel.showInsights | | true | -| spec.admin.leftPanel.showVaultInfo | | true | -| spec.admin.leftPanel.showOperations | | true | -| spec.admin.leftPanel.showBackup | | true | -| spec.admin.leftPanel.showBackupLegacy | | false | -| spec.admin.leftPanel.showSecurity | | false | -| spec.admin.nodeSelector | | {} | -| spec.admin.tolerations | | [] | -| spec.admin.databases.ClickHouse.versions.available | | [] | -| spec.admin.databases.ClickHouse.versions.default | | "" | -| spec.admin.databases.ClickHouse.versions.toggle | | true | -| spec.admin.databases.ClickHouse.mode.default | | "Topology" | -| spec.admin.databases.ClickHouse.mode.toggle | | true | -| spec.admin.storageClasses.available | | [] | -| spec.admin.storageClasses.default | | "" | -| spec.admin.storageClasses.toggle | | true | -| spec.admin.tls.default | | false | -| spec.admin.tls.toggle | | true | -| spec.admin.clusterIssuers.available | | [] | -| spec.admin.clusterIssuers.default | | "" | -| spec.admin.clusterIssuers.toggle | | true | -| spec.admin.expose.default | | false | -| spec.admin.expose.toggle | | false | -| spec.admin.monitoring.agent | Name of monitoring agent (one of "prometheus.io", "prometheus.io/operator", "prometheus.io/builtin") | "" | -| spec.admin.monitoring.exporter.resources | | {"limits":{"memory":"256Mi"},"requests":{"cpu":"100m","memory":"128Mi"}} | -| spec.admin.monitoring.toggle | | false | -| spec.admin.alert.toggle | | false | -| spec.admin.authCredential.customize | | true | -| spec.admin.authCredential.referExisting | | true | -| spec.admin.customConfiguration | | true | -| spec.admin.deletionPolicy.default | | WipeOut | -| spec.admin.deletionPolicy.toggle | | true | -| spec.admin.backup.enable.default | | false | -| spec.admin.backup.enable.toggle | | false | -| spec.admin.backup.by | | BackupConfiguration | -| spec.admin.backup.via | | Restic | -| spec.admin.archiver.enable.default | | false | -| spec.admin.archiver.enable.toggle | | false | -| spec.admin.archiver.via | | Restic | -| spec.admin.pointInTimeRecovery.default | | false | -| spec.admin.pointInTimeRecovery.toggle | | false | -| spec.admin.gitOps.enable.default | | false | -| spec.admin.gitOps.enable.toggle | | false | -| spec.admin.machineProfiles.machines | | [] | -| spec.admin.machineProfiles.available | | [] | -| spec.admin.machineProfiles.default | | "" | -| spec.backup.tool | | "" | -| spec.backup.toggle | | true | -| spec.backup.kubestash.schedule | | "" | -| spec.backup.kubestash.storageRef.name | | "" | -| spec.backup.kubestash.storageRef.namespace | | "" | -| spec.backup.kubestash.retentionPolicy.name | | "" | -| spec.backup.kubestash.retentionPolicy.namespace | | "" | -| spec.backup.kubestash.encryptionSecret.name | | "" | -| spec.backup.kubestash.encryptionSecret.namespace | | "" | -| spec.monitoring.serviceMonitor.labels | Specify the labels for ServiceMonitor. Prometheus crd will select ServiceMonitor using these labels. Only usable when monitoring agent is `prometheus.io/webhook server`. | {} | +| Parameter | Description | Default | +|----------------------------------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------|---------------------------------------------------------------------------------------| +| metadata.resource.group | | kubedb.com | +| metadata.resource.kind | | ClickHouse | +| metadata.resource.name | | clickhouses | +| metadata.resource.scope | | Namespaced | +| metadata.resource.version | | v1alpha2 | +| metadata.release.name | Release name | "" | +| metadata.release.namespace | Release namespace | "" | +| spec.annotations | Annotations to add to the database custom resource | {} | +| spec.labels | Labels to add to all the template objects | {} | +| spec.mode | Standalone, Topology | Standalone | +| spec.topology.clickHouseKeeper.externallyManaged | | false | +| spec.topology.clickHouseKeeper.node.host | | clickhouse-keeper.click-keeper | +| spec.topology.clickHouseKeeper.node.port | | 2181 | +| spec.topology.clickHouseKeeper.spec.persistence.size | | 2Gi | +| spec.topology.clickHouseKeeper.spec.podResources.machine | | "" | +| spec.topology.clickHouseKeeper.spec.podResources.resources.requests.cpu | | 500m | +| spec.topology.clickHouseKeeper.spec.podResources.resources.requests.memory | | 1Gi | +| spec.topology.clickHouseKeeper.spec.replicas | | 2 | +| spec.topology.cluster.replicas | | 3 | +| spec.topology.cluster.shards | | 2 | +| spec.deletionPolicy | | WipeOut | +| spec.persistence.size | | 2Gi | +| spec.podResources.machine | | "" | +| spec.podResources.resources.requests.cpu | | 500m | +| spec.podResources.resources.requests.memory | | 1Gi | +| spec.authSecret.name | | "" | +| spec.authSecret.password | | "" | +| spec.configuration | | "" | +| spec.openshift.securityContext.runAsUser | | | +| spec.admin.deployment.default | | Shared | +| spec.admin.deployment.toggle | | true | +| spec.admin.clusterTier.default | | "GeneralPurpose" | +| spec.admin.clusterTier.toggle | | true | +| spec.admin.clusterTier.nodeTopology.available | | [] | +| spec.admin.clusterTier.nodeTopology.default | | "" | +| spec.admin.clusterTier.nodeTopology.toggle | | true | +| spec.admin.clusterTier.placement.available | | [] | +| spec.admin.clusterTier.placement.default | | "" | +| spec.admin.clusterTier.placement.toggle | | true | +| spec.admin.showPreview | | false | +| spec.admin.leftPanel.showInsights | | true | +| spec.admin.leftPanel.showVaultInfo | | true | +| spec.admin.leftPanel.showOperations | | true | +| spec.admin.leftPanel.showBackup | | true | +| spec.admin.leftPanel.showBackupLegacy | | false | +| spec.admin.leftPanel.showSecurity | | false | +| spec.admin.nodeSelector | | {} | +| spec.admin.tolerations | | [] | +| spec.admin.databases.ClickHouse.versions.available | | [] | +| spec.admin.databases.ClickHouse.versions.default | | "" | +| spec.admin.databases.ClickHouse.versions.toggle | | true | +| spec.admin.databases.ClickHouse.mode.default | | "Topology" | +| spec.admin.databases.ClickHouse.mode.toggle | | true | +| spec.admin.storageClasses.available | | [] | +| spec.admin.storageClasses.default | | "" | +| spec.admin.storageClasses.toggle | | true | +| spec.admin.tls.default | | false | +| spec.admin.tls.toggle | | true | +| spec.admin.clusterIssuers.available | | [] | +| spec.admin.clusterIssuers.default | | "" | +| spec.admin.clusterIssuers.toggle | | true | +| spec.admin.expose.default | | false | +| spec.admin.expose.toggle | | false | +| spec.admin.monitoring.agent | Name of monitoring agent (one of "prometheus.io", "prometheus.io/operator", "prometheus.io/builtin") | "" | +| spec.admin.monitoring.exporter.resources | | {"limits":{"memory":"256Mi"},"requests":{"cpu":"100m","memory":"128Mi"}} | +| spec.admin.monitoring.toggle | | false | +| spec.admin.alert.toggle | | false | +| spec.admin.authCredential.customize | | true | +| spec.admin.authCredential.referExisting | | true | +| spec.admin.customConfiguration | | true | +| spec.admin.deletionPolicy.default | | WipeOut | +| spec.admin.deletionPolicy.toggle | | true | +| spec.admin.backup.enable.default | | false | +| spec.admin.backup.enable.toggle | | false | +| spec.admin.backup.by | | BackupConfiguration | +| spec.admin.backup.via | | Restic | +| spec.admin.archiver.enable.default | | false | +| spec.admin.archiver.enable.toggle | | false | +| spec.admin.archiver.via | | Restic | +| spec.admin.pointInTimeRecovery.default | | false | +| spec.admin.pointInTimeRecovery.toggle | | false | +| spec.admin.gitOps.enable.default | | false | +| spec.admin.gitOps.enable.toggle | | false | +| spec.admin.machineProfiles.machines | | [] | +| spec.admin.machineProfiles.available | | [] | +| spec.admin.machineProfiles.default | | "" | +| spec.backup.tool | | "" | +| spec.backup.toggle | | true | +| spec.backup.kubestash.schedule | | "" | +| spec.backup.kubestash.storageRef.name | | "" | +| spec.backup.kubestash.storageRef.namespace | | "" | +| spec.backup.kubestash.retentionPolicy.name | | "" | +| spec.backup.kubestash.retentionPolicy.namespace | | "" | +| spec.backup.kubestash.encryptionSecret.name | | "" | +| spec.backup.kubestash.encryptionSecret.namespace | | "" | +| spec.monitoring.serviceMonitor.labels | Specify the labels for ServiceMonitor. Prometheus crd will select ServiceMonitor using these labels. Only usable when monitoring agent is `prometheus.io/webhook server`. | {} | Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-clickhouse-editor-options appscode/kubedbcom-clickhouse-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-clickhouse-editor-options appscode/kubedbcom-clickhouse-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-clickhouse-editor-options appscode/kubedbcom-clickhouse-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-clickhouse-editor-options appscode/kubedbcom-clickhouse-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-clickhouse-editor/Chart.yaml b/charts/kubedbcom-clickhouse-editor/Chart.yaml index 548a5c51e0..771f55d532 100644 --- a/charts/kubedbcom-clickhouse-editor/Chart.yaml +++ b/charts/kubedbcom-clickhouse-editor/Chart.yaml @@ -1,24 +1,13 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1alpha2","resource":"clickhouses"}' meta.x-helm.dev/resource-keys: autoscalingKubedbComClickHouseAutoscaler,certManagerIoIssuer_ca,kubedbComClickHouse,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: ClickHouseAutoscaler - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: kubedb.com - kind: ClickHouse - version: v1alpha2 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: ClickHouseAutoscaler\n version: v1alpha1\n\ + - group: cert-manager.io\n kind: Issuer\n version: v1\n- group: kubedb.com\n\ + \ kind: ClickHouse\n version: v1alpha2\n- group: monitoring.coreos.com\n kind:\ + \ ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClickHouse Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -30,4 +19,4 @@ maintainers: name: appscode name: kubedbcom-clickhouse-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-clickhouse-editor/README.md b/charts/kubedbcom-clickhouse-editor/README.md index fe24c31728..eada48ad86 100644 --- a/charts/kubedbcom-clickhouse-editor/README.md +++ b/charts/kubedbcom-clickhouse-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-clickhouse-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-clickhouse-editor appscode/kubedbcom-clickhouse-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-clickhouse-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-clickhouse-editor appscode/kubedbcom-clickhouse-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClickHouse Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `kubedbcom-clickhouse-editor`: ```bash -$ helm upgrade -i kubedbcom-clickhouse-editor appscode/kubedbcom-clickhouse-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-clickhouse-editor appscode/kubedbcom-clickhouse-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClickHouse Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -65,12 +65,12 @@ The following table lists the configurable parameters of the `kubedbcom-clickhou Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-clickhouse-editor appscode/kubedbcom-clickhouse-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-clickhouse-editor appscode/kubedbcom-clickhouse-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-clickhouse-editor appscode/kubedbcom-clickhouse-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-clickhouse-editor appscode/kubedbcom-clickhouse-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-druid-editor-options/Chart.yaml b/charts/kubedbcom-druid-editor-options/Chart.yaml index a91b44d6e7..20ccfcfc5a 100644 --- a/charts/kubedbcom-druid-editor-options/Chart.yaml +++ b/charts/kubedbcom-druid-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-druid-editor-options description: Druid Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-druid-editor-options/README.md b/charts/kubedbcom-druid-editor-options/README.md index 6c05f1392f..9fdd59ba87 100644 --- a/charts/kubedbcom-druid-editor-options/README.md +++ b/charts/kubedbcom-druid-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-druid-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-druid-editor-options appscode/kubedbcom-druid-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-druid-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-druid-editor-options appscode/kubedbcom-druid-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Druid Editor UI Options on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `kubedbcom-druid-editor-options`: ```bash -$ helm upgrade -i kubedbcom-druid-editor-options appscode/kubedbcom-druid-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-druid-editor-options appscode/kubedbcom-druid-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Druid Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -218,12 +218,12 @@ The following table lists the configurable parameters of the `kubedbcom-druid-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-druid-editor-options appscode/kubedbcom-druid-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-druid-editor-options appscode/kubedbcom-druid-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-druid-editor-options appscode/kubedbcom-druid-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-druid-editor-options appscode/kubedbcom-druid-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-druid-editor/Chart.yaml b/charts/kubedbcom-druid-editor/Chart.yaml index 0dd10ceebd..f78f2473b1 100644 --- a/charts/kubedbcom-druid-editor/Chart.yaml +++ b/charts/kubedbcom-druid-editor/Chart.yaml @@ -2,33 +2,15 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1alpha2","resource":"druids"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComDruidAutoscaler,catalogAppscodeComDruidBinding,certManagerIoIssuer_ca,gitopsKubedbComDruid,kubedbComDruid,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: DruidAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: DruidBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: gitops.kubedb.com - kind: Druid - version: v1alpha1 - - group: kubedb.com - kind: Druid - version: v1alpha2 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: DruidAutoscaler\n version: v1alpha1\n- group:\ + \ catalog.appscode.com\n kind: DruidBinding\n version: v1alpha1\n- group: cert-manager.io\n\ + \ kind: Issuer\n version: v1\n- group: gitops.kubedb.com\n kind: Druid\n version:\ + \ v1alpha1\n- group: kubedb.com\n kind: Druid\n version: v1alpha2\n- group:\ + \ monitoring.coreos.com\n kind: PrometheusRule\n version: v1\n- group: monitoring.coreos.com\n\ + \ kind: ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Druid Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -40,4 +22,4 @@ maintainers: name: appscode name: kubedbcom-druid-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-druid-editor/README.md b/charts/kubedbcom-druid-editor/README.md index bf61410705..1e26d17694 100644 --- a/charts/kubedbcom-druid-editor/README.md +++ b/charts/kubedbcom-druid-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-druid-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-druid-editor appscode/kubedbcom-druid-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-druid-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-druid-editor appscode/kubedbcom-druid-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Druid Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `kubedbcom-druid-editor`: ```bash -$ helm upgrade -i kubedbcom-druid-editor appscode/kubedbcom-druid-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-druid-editor appscode/kubedbcom-druid-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Druid Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -117,12 +117,12 @@ The following table lists the configurable parameters of the `kubedbcom-druid-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-druid-editor appscode/kubedbcom-druid-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-druid-editor appscode/kubedbcom-druid-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-druid-editor appscode/kubedbcom-druid-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-druid-editor appscode/kubedbcom-druid-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-druid-editor/ui/edit-ui.yaml b/charts/kubedbcom-druid-editor/ui/edit-ui.yaml index effcc8807e..54bf1adb3d 100644 --- a/charts/kubedbcom-druid-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-druid-editor/ui/edit-ui.yaml @@ -979,7 +979,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace diff --git a/charts/kubedbcom-elasticsearch-editor-options/Chart.yaml b/charts/kubedbcom-elasticsearch-editor-options/Chart.yaml index f4c0b025d8..7894ab4779 100644 --- a/charts/kubedbcom-elasticsearch-editor-options/Chart.yaml +++ b/charts/kubedbcom-elasticsearch-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-elasticsearch-editor-options description: Elasticsearch Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-elasticsearch-editor-options/README.md b/charts/kubedbcom-elasticsearch-editor-options/README.md index 87a01488e4..29f5fa574e 100644 --- a/charts/kubedbcom-elasticsearch-editor-options/README.md +++ b/charts/kubedbcom-elasticsearch-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-elasticsearch-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-elasticsearch-editor-options appscode/kubedbcom-elasticsearch-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-elasticsearch-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-elasticsearch-editor-options appscode/kubedbcom-elasticsearch-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Elasticsearch Editor UI Options on a [Kubernetes](http://ku To install/upgrade the chart with the release name `kubedbcom-elasticsearch-editor-options`: ```bash -$ helm upgrade -i kubedbcom-elasticsearch-editor-options appscode/kubedbcom-elasticsearch-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-elasticsearch-editor-options appscode/kubedbcom-elasticsearch-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Elasticsearch Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -283,12 +283,12 @@ The following table lists the configurable parameters of the `kubedbcom-elastics Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-elasticsearch-editor-options appscode/kubedbcom-elasticsearch-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-elasticsearch-editor-options appscode/kubedbcom-elasticsearch-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-elasticsearch-editor-options appscode/kubedbcom-elasticsearch-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-elasticsearch-editor-options appscode/kubedbcom-elasticsearch-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-elasticsearch-editor/Chart.yaml b/charts/kubedbcom-elasticsearch-editor/Chart.yaml index 8d25ef1920..fbc9dd68a4 100644 --- a/charts/kubedbcom-elasticsearch-editor/Chart.yaml +++ b/charts/kubedbcom-elasticsearch-editor/Chart.yaml @@ -2,51 +2,21 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1","resource":"elasticsearches"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComElasticsearchAutoscaler,catalogAppscodeComElasticsearchBinding,certManagerIoIssuer_ca,coreKubestashComBackupBlueprint,coreKubestashComBackupConfiguration,coreKubestashComRestoreSession,gitopsKubedbComElasticsearch,kubedbComElasticsearch,monitoringCoreosComServiceMonitor,secret_admin_cred,secret_elastic_cred,secret_encryption_secret,secret_init_repo_cred,secret_kibanaro_cred,secret_kibanaserver_cred,secret_logstash_cred,secret_metrics_exporter_cred,secret_readall_cred,secret_repo_cred,secret_secure_config,secret_snapshotrestore_cred,secret_user_config,stashAppscodeComBackupConfiguration,stashAppscodeComRepository_init_repo,stashAppscodeComRepository_repo,stashAppscodeComRestoreSession_init - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: ElasticsearchAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: ElasticsearchBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: core.kubestash.com - kind: BackupBlueprint - version: v1alpha1 - - group: core.kubestash.com - kind: BackupConfiguration - version: v1alpha1 - - group: core.kubestash.com - kind: RestoreSession - version: v1alpha1 - - group: gitops.kubedb.com - kind: Elasticsearch - version: v1alpha1 - - group: kubedb.com - kind: Elasticsearch - version: v1 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 - - group: stash.appscode.com - kind: BackupConfiguration - version: v1beta1 - - group: stash.appscode.com - kind: Repository - version: v1alpha1 - - group: stash.appscode.com - kind: RestoreSession - version: v1beta1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: ElasticsearchAutoscaler\n version: v1alpha1\n\ + - group: catalog.appscode.com\n kind: ElasticsearchBinding\n version: v1alpha1\n\ + - group: cert-manager.io\n kind: Issuer\n version: v1\n- group: core.kubestash.com\n\ + \ kind: BackupBlueprint\n version: v1alpha1\n- group: core.kubestash.com\n \ + \ kind: BackupConfiguration\n version: v1alpha1\n- group: core.kubestash.com\n\ + \ kind: RestoreSession\n version: v1alpha1\n- group: gitops.kubedb.com\n kind:\ + \ Elasticsearch\n version: v1alpha1\n- group: kubedb.com\n kind: Elasticsearch\n\ + \ version: v1\n- group: monitoring.coreos.com\n kind: PrometheusRule\n version:\ + \ v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version: v1\n\ + - group: stash.appscode.com\n kind: BackupConfiguration\n version: v1beta1\n\ + - group: stash.appscode.com\n kind: Repository\n version: v1alpha1\n- group:\ + \ stash.appscode.com\n kind: RestoreSession\n version: v1beta1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Elasticsearch Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -58,4 +28,4 @@ maintainers: name: appscode name: kubedbcom-elasticsearch-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-elasticsearch-editor/README.md b/charts/kubedbcom-elasticsearch-editor/README.md index 3757a8018d..be8bd2c7d3 100644 --- a/charts/kubedbcom-elasticsearch-editor/README.md +++ b/charts/kubedbcom-elasticsearch-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-elasticsearch-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-elasticsearch-editor appscode/kubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-elasticsearch-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-elasticsearch-editor appscode/kubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Elasticsearch Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `kubedbcom-elasticsearch-editor`: ```bash -$ helm upgrade -i kubedbcom-elasticsearch-editor appscode/kubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-elasticsearch-editor appscode/kubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Elasticsearch Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -212,12 +212,12 @@ The following table lists the configurable parameters of the `kubedbcom-elastics Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-elasticsearch-editor appscode/kubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-elasticsearch-editor appscode/kubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-elasticsearch-editor appscode/kubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-elasticsearch-editor appscode/kubedbcom-elasticsearch-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-elasticsearch-editor/ui/create-ui.yaml b/charts/kubedbcom-elasticsearch-editor/ui/create-ui.yaml index 0ec923a693..185934eb32 100644 --- a/charts/kubedbcom-elasticsearch-editor/ui/create-ui.yaml +++ b/charts/kubedbcom-elasticsearch-editor/ui/create-ui.yaml @@ -146,7 +146,7 @@ steps: - alias: reusable_alert chart: name: uibytebuildersdev-component-alert - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/form/properties/alert @@ -707,7 +707,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 functionCallbacks: getAliasOptions: $ref: functions#/getAliasOptions @@ -830,7 +830,7 @@ steps: - alias: repository_create_init chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -866,7 +866,7 @@ steps: - alias: runtime_settings_init chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -955,7 +955,7 @@ steps: - alias: repository_create_backup chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -1041,7 +1041,7 @@ steps: - alias: runtime_settings_backup chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -1321,7 +1321,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -1341,7 +1341,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -1362,7 +1362,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComElasticsearch/properties/spec/properties/serviceTemplates diff --git a/charts/kubedbcom-elasticsearch-editor/ui/edit-ui.yaml b/charts/kubedbcom-elasticsearch-editor/ui/edit-ui.yaml index 916beef36b..ad5b9ec5f1 100644 --- a/charts/kubedbcom-elasticsearch-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-elasticsearch-editor/ui/edit-ui.yaml @@ -106,7 +106,7 @@ steps: - alias: reusable_alert chart: name: uibytebuildersdev-component-alert - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/form/properties/alert @@ -689,7 +689,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComElasticsearch/properties/spec/properties/tls/properties/certificates @@ -811,7 +811,7 @@ steps: - alias: repository_create_init chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -847,7 +847,7 @@ steps: - alias: runtime_settings_init chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -1211,7 +1211,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -1231,7 +1231,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -1252,7 +1252,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComElasticsearch/properties/spec/properties/serviceTemplates diff --git a/charts/kubedbcom-etcd-editor/Chart.yaml b/charts/kubedbcom-etcd-editor/Chart.yaml index 0144a7a5c7..38bba41b98 100644 --- a/charts/kubedbcom-etcd-editor/Chart.yaml +++ b/charts/kubedbcom-etcd-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1alpha2","resource":"etcds"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Etcd Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kubedbcom-etcd-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-etcd-editor/README.md b/charts/kubedbcom-etcd-editor/README.md index 0dfb0d649f..9fb012f939 100644 --- a/charts/kubedbcom-etcd-editor/README.md +++ b/charts/kubedbcom-etcd-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-etcd-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-etcd-editor appscode/kubedbcom-etcd-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-etcd-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-etcd-editor appscode/kubedbcom-etcd-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Etcd Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `kubedbcom-etcd-editor`: ```bash -$ helm upgrade -i kubedbcom-etcd-editor appscode/kubedbcom-etcd-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-etcd-editor appscode/kubedbcom-etcd-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Etcd Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kubedbcom-etcd-edi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-etcd-editor appscode/kubedbcom-etcd-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=kubedb.com/v1alpha2 +$ helm upgrade -i kubedbcom-etcd-editor appscode/kubedbcom-etcd-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=kubedb.com/v1alpha2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-etcd-editor appscode/kubedbcom-etcd-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-etcd-editor appscode/kubedbcom-etcd-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-ferretdb-editor-options/Chart.yaml b/charts/kubedbcom-ferretdb-editor-options/Chart.yaml index 42c5b90857..96f47a4177 100644 --- a/charts/kubedbcom-ferretdb-editor-options/Chart.yaml +++ b/charts/kubedbcom-ferretdb-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-ferretdb-editor-options description: FerretDB Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-ferretdb-editor-options/README.md b/charts/kubedbcom-ferretdb-editor-options/README.md index 478d042e7d..0274a07471 100644 --- a/charts/kubedbcom-ferretdb-editor-options/README.md +++ b/charts/kubedbcom-ferretdb-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-ferretdb-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-ferretdb-editor-options appscode/kubedbcom-ferretdb-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-ferretdb-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-ferretdb-editor-options appscode/kubedbcom-ferretdb-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FerretDB Editor UI Options on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `kubedbcom-ferretdb-editor-options`: ```bash -$ helm upgrade -i kubedbcom-ferretdb-editor-options appscode/kubedbcom-ferretdb-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-ferretdb-editor-options appscode/kubedbcom-ferretdb-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a FerretDB Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -255,12 +255,12 @@ The following table lists the configurable parameters of the `kubedbcom-ferretdb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-ferretdb-editor-options appscode/kubedbcom-ferretdb-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-ferretdb-editor-options appscode/kubedbcom-ferretdb-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-ferretdb-editor-options appscode/kubedbcom-ferretdb-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-ferretdb-editor-options appscode/kubedbcom-ferretdb-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-ferretdb-editor/Chart.yaml b/charts/kubedbcom-ferretdb-editor/Chart.yaml index 1b17134a4f..0335c564b8 100644 --- a/charts/kubedbcom-ferretdb-editor/Chart.yaml +++ b/charts/kubedbcom-ferretdb-editor/Chart.yaml @@ -2,33 +2,16 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1alpha2","resource":"ferretdbs"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComFerretDBAutoscaler,catalogAppscodeComFerretDBBinding,certManagerIoIssuer_ca,gitopsKubedbComFerretDB,kubedbComFerretDB,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: FerretDBAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: FerretDBBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: gitops.kubedb.com - kind: FerretDB - version: v1alpha1 - - group: kubedb.com - kind: FerretDB - version: v1alpha2 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: FerretDBAutoscaler\n version: v1alpha1\n- group:\ + \ catalog.appscode.com\n kind: FerretDBBinding\n version: v1alpha1\n- group:\ + \ cert-manager.io\n kind: Issuer\n version: v1\n- group: gitops.kubedb.com\n\ + \ kind: FerretDB\n version: v1alpha1\n- group: kubedb.com\n kind: FerretDB\n\ + \ version: v1alpha2\n- group: monitoring.coreos.com\n kind: PrometheusRule\n\ + \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ + \ v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FerretDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -40,4 +23,4 @@ maintainers: name: appscode name: kubedbcom-ferretdb-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-ferretdb-editor/README.md b/charts/kubedbcom-ferretdb-editor/README.md index ea352f5874..3038ff49ac 100644 --- a/charts/kubedbcom-ferretdb-editor/README.md +++ b/charts/kubedbcom-ferretdb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-ferretdb-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-ferretdb-editor appscode/kubedbcom-ferretdb-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-ferretdb-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-ferretdb-editor appscode/kubedbcom-ferretdb-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FerretDB Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `kubedbcom-ferretdb-editor`: ```bash -$ helm upgrade -i kubedbcom-ferretdb-editor appscode/kubedbcom-ferretdb-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-ferretdb-editor appscode/kubedbcom-ferretdb-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FerretDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -173,12 +173,12 @@ The following table lists the configurable parameters of the `kubedbcom-ferretdb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-ferretdb-editor appscode/kubedbcom-ferretdb-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-ferretdb-editor appscode/kubedbcom-ferretdb-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-ferretdb-editor appscode/kubedbcom-ferretdb-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-ferretdb-editor appscode/kubedbcom-ferretdb-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-ferretdb-editor/ui/edit-ui.yaml b/charts/kubedbcom-ferretdb-editor/ui/edit-ui.yaml index 68d2bd305d..cb735d2a85 100644 --- a/charts/kubedbcom-ferretdb-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-ferretdb-editor/ui/edit-ui.yaml @@ -538,7 +538,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace diff --git a/charts/kubedbcom-hazelcast-editor-options/Chart.yaml b/charts/kubedbcom-hazelcast-editor-options/Chart.yaml index 5808091f64..134ccd03d1 100644 --- a/charts/kubedbcom-hazelcast-editor-options/Chart.yaml +++ b/charts/kubedbcom-hazelcast-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-hazelcast-editor-options description: Hazelcast Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-hazelcast-editor-options/README.md b/charts/kubedbcom-hazelcast-editor-options/README.md index a335e38b7f..4a15fdca73 100644 --- a/charts/kubedbcom-hazelcast-editor-options/README.md +++ b/charts/kubedbcom-hazelcast-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-hazelcast-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-hazelcast-editor-options appscode/kubedbcom-hazelcast-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-hazelcast-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-hazelcast-editor-options appscode/kubedbcom-hazelcast-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Hazelcast Editor UI Options on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `kubedbcom-hazelcast-editor-options`: ```bash -$ helm upgrade -i kubedbcom-hazelcast-editor-options appscode/kubedbcom-hazelcast-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-hazelcast-editor-options appscode/kubedbcom-hazelcast-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Hazelcast Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -140,12 +140,12 @@ The following table lists the configurable parameters of the `kubedbcom-hazelcas Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-hazelcast-editor-options appscode/kubedbcom-hazelcast-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-hazelcast-editor-options appscode/kubedbcom-hazelcast-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-hazelcast-editor-options appscode/kubedbcom-hazelcast-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-hazelcast-editor-options appscode/kubedbcom-hazelcast-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-hazelcast-editor/Chart.yaml b/charts/kubedbcom-hazelcast-editor/Chart.yaml index 8c1d072595..a8208c7ccc 100644 --- a/charts/kubedbcom-hazelcast-editor/Chart.yaml +++ b/charts/kubedbcom-hazelcast-editor/Chart.yaml @@ -1,30 +1,15 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1alpha2","resource":"hazelcasts"}' meta.x-helm.dev/resource-keys: certManagerIoIssuer_ca,coreKubestashComBackupBlueprint,coreKubestashComBackupConfiguration,coreKubestashComRestoreSession,kubedbComHazelcast,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: core.kubestash.com - kind: BackupBlueprint - version: v1alpha1 - - group: core.kubestash.com - kind: BackupConfiguration - version: v1alpha1 - - group: core.kubestash.com - kind: RestoreSession - version: v1alpha1 - - group: kubedb.com - kind: Hazelcast - version: v1alpha2 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ cert-manager.io\n kind: Issuer\n version: v1\n- group: core.kubestash.com\n\ + \ kind: BackupBlueprint\n version: v1alpha1\n- group: core.kubestash.com\n \ + \ kind: BackupConfiguration\n version: v1alpha1\n- group: core.kubestash.com\n\ + \ kind: RestoreSession\n version: v1alpha1\n- group: kubedb.com\n kind: Hazelcast\n\ + \ version: v1alpha2\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n\ + \ version: v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Hazelcast Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -36,4 +21,4 @@ maintainers: name: appscode name: kubedbcom-hazelcast-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-hazelcast-editor/README.md b/charts/kubedbcom-hazelcast-editor/README.md index b30aa89ee8..10dd6b2f2c 100644 --- a/charts/kubedbcom-hazelcast-editor/README.md +++ b/charts/kubedbcom-hazelcast-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-hazelcast-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-hazelcast-editor appscode/kubedbcom-hazelcast-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-hazelcast-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-hazelcast-editor appscode/kubedbcom-hazelcast-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Hazelcast Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `kubedbcom-hazelcast-editor`: ```bash -$ helm upgrade -i kubedbcom-hazelcast-editor appscode/kubedbcom-hazelcast-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-hazelcast-editor appscode/kubedbcom-hazelcast-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Hazelcast Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -67,12 +67,12 @@ The following table lists the configurable parameters of the `kubedbcom-hazelcas Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-hazelcast-editor appscode/kubedbcom-hazelcast-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-hazelcast-editor appscode/kubedbcom-hazelcast-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-hazelcast-editor appscode/kubedbcom-hazelcast-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-hazelcast-editor appscode/kubedbcom-hazelcast-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-ignite-editor-options/Chart.yaml b/charts/kubedbcom-ignite-editor-options/Chart.yaml index 2e0f46b88e..edb29f6317 100644 --- a/charts/kubedbcom-ignite-editor-options/Chart.yaml +++ b/charts/kubedbcom-ignite-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-ignite-editor-options description: Ignite Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-ignite-editor-options/README.md b/charts/kubedbcom-ignite-editor-options/README.md index e6da271111..54029e4c73 100644 --- a/charts/kubedbcom-ignite-editor-options/README.md +++ b/charts/kubedbcom-ignite-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-ignite-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-ignite-editor-options appscode/kubedbcom-ignite-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-ignite-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-ignite-editor-options appscode/kubedbcom-ignite-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Ignite Editor UI Options on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `kubedbcom-ignite-editor-options`: ```bash -$ helm upgrade -i kubedbcom-ignite-editor-options appscode/kubedbcom-ignite-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-ignite-editor-options appscode/kubedbcom-ignite-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Ignite Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -139,12 +139,12 @@ The following table lists the configurable parameters of the `kubedbcom-ignite-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-ignite-editor-options appscode/kubedbcom-ignite-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-ignite-editor-options appscode/kubedbcom-ignite-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-ignite-editor-options appscode/kubedbcom-ignite-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-ignite-editor-options appscode/kubedbcom-ignite-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-ignite-editor/Chart.yaml b/charts/kubedbcom-ignite-editor/Chart.yaml index 58ff8e0c64..078e887714 100644 --- a/charts/kubedbcom-ignite-editor/Chart.yaml +++ b/charts/kubedbcom-ignite-editor/Chart.yaml @@ -1,30 +1,15 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1alpha2","resource":"ignites"}' meta.x-helm.dev/resource-keys: certManagerIoIssuer_ca,coreKubestashComBackupBlueprint,coreKubestashComBackupConfiguration,coreKubestashComRestoreSession,kubedbComIgnite,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: core.kubestash.com - kind: BackupBlueprint - version: v1alpha1 - - group: core.kubestash.com - kind: BackupConfiguration - version: v1alpha1 - - group: core.kubestash.com - kind: RestoreSession - version: v1alpha1 - - group: kubedb.com - kind: Ignite - version: v1alpha2 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ cert-manager.io\n kind: Issuer\n version: v1\n- group: core.kubestash.com\n\ + \ kind: BackupBlueprint\n version: v1alpha1\n- group: core.kubestash.com\n \ + \ kind: BackupConfiguration\n version: v1alpha1\n- group: core.kubestash.com\n\ + \ kind: RestoreSession\n version: v1alpha1\n- group: kubedb.com\n kind: Ignite\n\ + \ version: v1alpha2\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n\ + \ version: v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Ignite Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -36,4 +21,4 @@ maintainers: name: appscode name: kubedbcom-ignite-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-ignite-editor/README.md b/charts/kubedbcom-ignite-editor/README.md index daa0e225d9..343e4947d9 100644 --- a/charts/kubedbcom-ignite-editor/README.md +++ b/charts/kubedbcom-ignite-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-ignite-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-ignite-editor appscode/kubedbcom-ignite-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-ignite-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-ignite-editor appscode/kubedbcom-ignite-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Ignite Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `kubedbcom-ignite-editor`: ```bash -$ helm upgrade -i kubedbcom-ignite-editor appscode/kubedbcom-ignite-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-ignite-editor appscode/kubedbcom-ignite-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Ignite Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -67,12 +67,12 @@ The following table lists the configurable parameters of the `kubedbcom-ignite-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-ignite-editor appscode/kubedbcom-ignite-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-ignite-editor appscode/kubedbcom-ignite-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-ignite-editor appscode/kubedbcom-ignite-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-ignite-editor appscode/kubedbcom-ignite-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-kafka-editor-options/Chart.yaml b/charts/kubedbcom-kafka-editor-options/Chart.yaml index 9e279d2229..64b45f51ab 100644 --- a/charts/kubedbcom-kafka-editor-options/Chart.yaml +++ b/charts/kubedbcom-kafka-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-kafka-editor-options description: Kafka Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-kafka-editor-options/README.md b/charts/kubedbcom-kafka-editor-options/README.md index 5ae01977cf..b93021929e 100644 --- a/charts/kubedbcom-kafka-editor-options/README.md +++ b/charts/kubedbcom-kafka-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-kafka-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-kafka-editor-options appscode/kubedbcom-kafka-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-kafka-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-kafka-editor-options appscode/kubedbcom-kafka-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Kafka Editor UI Options on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `kubedbcom-kafka-editor-options`: ```bash -$ helm upgrade -i kubedbcom-kafka-editor-options appscode/kubedbcom-kafka-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-kafka-editor-options appscode/kubedbcom-kafka-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Kafka Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -233,12 +233,12 @@ The following table lists the configurable parameters of the `kubedbcom-kafka-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-kafka-editor-options appscode/kubedbcom-kafka-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-kafka-editor-options appscode/kubedbcom-kafka-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-kafka-editor-options appscode/kubedbcom-kafka-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-kafka-editor-options appscode/kubedbcom-kafka-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-kafka-editor/Chart.yaml b/charts/kubedbcom-kafka-editor/Chart.yaml index 82d94ec42c..dddd986e24 100644 --- a/charts/kubedbcom-kafka-editor/Chart.yaml +++ b/charts/kubedbcom-kafka-editor/Chart.yaml @@ -1,27 +1,13 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1","resource":"kafkas"}' meta.x-helm.dev/resource-keys: autoscalingKubedbComKafkaAutoscaler,catalogAppscodeComKafkaBinding,gitopsKubedbComKafka,kubedbComKafka,monitoringCoreosComServiceMonitor,secret_admin_cred - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: KafkaAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: KafkaBinding - version: v1alpha1 - - group: gitops.kubedb.com - kind: Kafka - version: v1alpha1 - - group: kubedb.com - kind: Kafka - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: KafkaAutoscaler\n version: v1alpha1\n- group:\ + \ catalog.appscode.com\n kind: KafkaBinding\n version: v1alpha1\n- group: gitops.kubedb.com\n\ + \ kind: Kafka\n version: v1alpha1\n- group: kubedb.com\n kind: Kafka\n version:\ + \ v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Kafka Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -33,4 +19,4 @@ maintainers: name: appscode name: kubedbcom-kafka-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-kafka-editor/README.md b/charts/kubedbcom-kafka-editor/README.md index 214631cdd4..afd811d754 100644 --- a/charts/kubedbcom-kafka-editor/README.md +++ b/charts/kubedbcom-kafka-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-kafka-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-kafka-editor appscode/kubedbcom-kafka-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-kafka-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-kafka-editor appscode/kubedbcom-kafka-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Kafka Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `kubedbcom-kafka-editor`: ```bash -$ helm upgrade -i kubedbcom-kafka-editor appscode/kubedbcom-kafka-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-kafka-editor appscode/kubedbcom-kafka-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Kafka Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -149,12 +149,12 @@ The following table lists the configurable parameters of the `kubedbcom-kafka-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-kafka-editor appscode/kubedbcom-kafka-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-kafka-editor appscode/kubedbcom-kafka-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-kafka-editor appscode/kubedbcom-kafka-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-kafka-editor appscode/kubedbcom-kafka-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-kafka-editor/ui/create-ui.yaml b/charts/kubedbcom-kafka-editor/ui/create-ui.yaml index 6911894382..b17ebdcf0b 100644 --- a/charts/kubedbcom-kafka-editor/ui/create-ui.yaml +++ b/charts/kubedbcom-kafka-editor/ui/create-ui.yaml @@ -266,7 +266,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 functionCallbacks: getAliasOptions: $ref: functions#/getAliasOptions @@ -446,7 +446,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComKafka/properties/spec/properties/serviceTemplates @@ -459,7 +459,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace diff --git a/charts/kubedbcom-kafka-editor/ui/edit-ui.yaml b/charts/kubedbcom-kafka-editor/ui/edit-ui.yaml index d697b36858..bb2bca8eaf 100644 --- a/charts/kubedbcom-kafka-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-kafka-editor/ui/edit-ui.yaml @@ -293,7 +293,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComKafka/properties/spec/properties/tls/properties/certificates @@ -523,7 +523,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -543,7 +543,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComKafka/properties/spec/properties/serviceTemplates @@ -556,7 +556,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace diff --git a/charts/kubedbcom-mariadb-editor-options/Chart.yaml b/charts/kubedbcom-mariadb-editor-options/Chart.yaml index 33830d855c..ad9d04a753 100644 --- a/charts/kubedbcom-mariadb-editor-options/Chart.yaml +++ b/charts/kubedbcom-mariadb-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-mariadb-editor-options description: MariaDB Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-mariadb-editor-options/README.md b/charts/kubedbcom-mariadb-editor-options/README.md index 6f05aa7f11..8cc6cada8a 100644 --- a/charts/kubedbcom-mariadb-editor-options/README.md +++ b/charts/kubedbcom-mariadb-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-mariadb-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-mariadb-editor-options appscode/kubedbcom-mariadb-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-mariadb-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-mariadb-editor-options appscode/kubedbcom-mariadb-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDB Editor UI Options on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `kubedbcom-mariadb-editor-options`: ```bash -$ helm upgrade -i kubedbcom-mariadb-editor-options appscode/kubedbcom-mariadb-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-mariadb-editor-options appscode/kubedbcom-mariadb-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a MariaDB Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -291,12 +291,12 @@ The following table lists the configurable parameters of the `kubedbcom-mariadb- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-mariadb-editor-options appscode/kubedbcom-mariadb-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-mariadb-editor-options appscode/kubedbcom-mariadb-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-mariadb-editor-options appscode/kubedbcom-mariadb-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-mariadb-editor-options appscode/kubedbcom-mariadb-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-mariadb-editor/Chart.yaml b/charts/kubedbcom-mariadb-editor/Chart.yaml index 76df2db129..56e518a770 100644 --- a/charts/kubedbcom-mariadb-editor/Chart.yaml +++ b/charts/kubedbcom-mariadb-editor/Chart.yaml @@ -2,51 +2,21 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1","resource":"mariadbs"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComMariaDBAutoscaler,catalogAppscodeComMariaDBBinding,certManagerIoIssuer_ca,coreKubestashComBackupBlueprint,coreKubestashComBackupConfiguration,coreKubestashComRestoreSession,gitopsKubedbComMariaDB,kubedbComMariaDB,monitoringCoreosComServiceMonitor,secret_auth,secret_config,secret_encryption_secret,secret_init_repo_cred,secret_repo_cred,stashAppscodeComBackupConfiguration,stashAppscodeComRepository_init_repo,stashAppscodeComRepository_repo,stashAppscodeComRestoreSession_init - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: MariaDBAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: MariaDBBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: core.kubestash.com - kind: BackupBlueprint - version: v1alpha1 - - group: core.kubestash.com - kind: BackupConfiguration - version: v1alpha1 - - group: core.kubestash.com - kind: RestoreSession - version: v1alpha1 - - group: gitops.kubedb.com - kind: MariaDB - version: v1alpha1 - - group: kubedb.com - kind: MariaDB - version: v1 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 - - group: stash.appscode.com - kind: BackupConfiguration - version: v1beta1 - - group: stash.appscode.com - kind: Repository - version: v1alpha1 - - group: stash.appscode.com - kind: RestoreSession - version: v1beta1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: MariaDBAutoscaler\n version: v1alpha1\n- group:\ + \ catalog.appscode.com\n kind: MariaDBBinding\n version: v1alpha1\n- group:\ + \ cert-manager.io\n kind: Issuer\n version: v1\n- group: core.kubestash.com\n\ + \ kind: BackupBlueprint\n version: v1alpha1\n- group: core.kubestash.com\n \ + \ kind: BackupConfiguration\n version: v1alpha1\n- group: core.kubestash.com\n\ + \ kind: RestoreSession\n version: v1alpha1\n- group: gitops.kubedb.com\n kind:\ + \ MariaDB\n version: v1alpha1\n- group: kubedb.com\n kind: MariaDB\n version:\ + \ v1\n- group: monitoring.coreos.com\n kind: PrometheusRule\n version: v1\n\ + - group: monitoring.coreos.com\n kind: ServiceMonitor\n version: v1\n- group:\ + \ stash.appscode.com\n kind: BackupConfiguration\n version: v1beta1\n- group:\ + \ stash.appscode.com\n kind: Repository\n version: v1alpha1\n- group: stash.appscode.com\n\ + \ kind: RestoreSession\n version: v1beta1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MariaDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -58,4 +28,4 @@ maintainers: name: appscode name: kubedbcom-mariadb-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-mariadb-editor/README.md b/charts/kubedbcom-mariadb-editor/README.md index 0cd1edc0b6..16cff3ca41 100644 --- a/charts/kubedbcom-mariadb-editor/README.md +++ b/charts/kubedbcom-mariadb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-mariadb-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-mariadb-editor appscode/kubedbcom-mariadb-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-mariadb-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-mariadb-editor appscode/kubedbcom-mariadb-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDB Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `kubedbcom-mariadb-editor`: ```bash -$ helm upgrade -i kubedbcom-mariadb-editor appscode/kubedbcom-mariadb-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-mariadb-editor appscode/kubedbcom-mariadb-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MariaDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -221,12 +221,12 @@ The following table lists the configurable parameters of the `kubedbcom-mariadb- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-mariadb-editor appscode/kubedbcom-mariadb-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-mariadb-editor appscode/kubedbcom-mariadb-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-mariadb-editor appscode/kubedbcom-mariadb-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-mariadb-editor appscode/kubedbcom-mariadb-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-mariadb-editor/ui/create-ui.yaml b/charts/kubedbcom-mariadb-editor/ui/create-ui.yaml index c8ace1535d..5ad292c87f 100644 --- a/charts/kubedbcom-mariadb-editor/ui/create-ui.yaml +++ b/charts/kubedbcom-mariadb-editor/ui/create-ui.yaml @@ -124,7 +124,7 @@ steps: - alias: reusable_alert chart: name: uibytebuildersdev-component-alert - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/form/properties/alert @@ -228,7 +228,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 functionCallbacks: getAliasOptions: $ref: functions#/getAliasOptions @@ -350,7 +350,7 @@ steps: - alias: repository_create_init chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -386,7 +386,7 @@ steps: - alias: runtime_settings_init chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -475,7 +475,7 @@ steps: - alias: repository_create_backup chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -561,7 +561,7 @@ steps: - alias: runtime_settings_backup chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -841,7 +841,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -861,7 +861,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -877,7 +877,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComMariaDB/properties/spec/properties/serviceTemplates diff --git a/charts/kubedbcom-mariadb-editor/ui/edit-ui.yaml b/charts/kubedbcom-mariadb-editor/ui/edit-ui.yaml index 7f8f625fab..4f0f2bb7e0 100644 --- a/charts/kubedbcom-mariadb-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-mariadb-editor/ui/edit-ui.yaml @@ -89,7 +89,7 @@ steps: - alias: reusable_alert chart: name: uibytebuildersdev-component-alert - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/form/properties/alert @@ -255,7 +255,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComMariaDB/properties/spec/properties/tls/properties/certificates @@ -376,7 +376,7 @@ steps: - alias: repository_create_init chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -412,7 +412,7 @@ steps: - alias: runtime_settings_init chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -776,7 +776,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -797,7 +797,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -817,7 +817,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComMariaDB/properties/spec/properties/serviceTemplates diff --git a/charts/kubedbcom-memcached-editor-options/Chart.yaml b/charts/kubedbcom-memcached-editor-options/Chart.yaml index 2da6675473..698a06f1dc 100644 --- a/charts/kubedbcom-memcached-editor-options/Chart.yaml +++ b/charts/kubedbcom-memcached-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-memcached-editor-options description: Memcached Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-memcached-editor-options/README.md b/charts/kubedbcom-memcached-editor-options/README.md index bfe8f46274..eb4caabae9 100644 --- a/charts/kubedbcom-memcached-editor-options/README.md +++ b/charts/kubedbcom-memcached-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-memcached-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-memcached-editor-options appscode/kubedbcom-memcached-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-memcached-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-memcached-editor-options appscode/kubedbcom-memcached-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Memcached Editor UI Options on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `kubedbcom-memcached-editor-options`: ```bash -$ helm upgrade -i kubedbcom-memcached-editor-options appscode/kubedbcom-memcached-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-memcached-editor-options appscode/kubedbcom-memcached-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Memcached Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -185,12 +185,12 @@ The following table lists the configurable parameters of the `kubedbcom-memcache Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-memcached-editor-options appscode/kubedbcom-memcached-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-memcached-editor-options appscode/kubedbcom-memcached-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-memcached-editor-options appscode/kubedbcom-memcached-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-memcached-editor-options appscode/kubedbcom-memcached-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-memcached-editor/Chart.yaml b/charts/kubedbcom-memcached-editor/Chart.yaml index c5b6e12b1f..666662687f 100644 --- a/charts/kubedbcom-memcached-editor/Chart.yaml +++ b/charts/kubedbcom-memcached-editor/Chart.yaml @@ -1,30 +1,15 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1","resource":"memcacheds"}' meta.x-helm.dev/resource-keys: autoscalingKubedbComMemcachedAutoscaler,catalogAppscodeComMemcachedBinding,certManagerIoIssuer_ca,gitopsKubedbComMemcached,kubedbComMemcached,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: MemcachedAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: MemcachedBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: gitops.kubedb.com - kind: Memcached - version: v1alpha1 - - group: kubedb.com - kind: Memcached - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: MemcachedAutoscaler\n version: v1alpha1\n-\ + \ group: catalog.appscode.com\n kind: MemcachedBinding\n version: v1alpha1\n\ + - group: cert-manager.io\n kind: Issuer\n version: v1\n- group: gitops.kubedb.com\n\ + \ kind: Memcached\n version: v1alpha1\n- group: kubedb.com\n kind: Memcached\n\ + \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ + \ v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Memcached Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -36,4 +21,4 @@ maintainers: name: appscode name: kubedbcom-memcached-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-memcached-editor/README.md b/charts/kubedbcom-memcached-editor/README.md index 2894b07585..1f820e43e1 100644 --- a/charts/kubedbcom-memcached-editor/README.md +++ b/charts/kubedbcom-memcached-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-memcached-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-memcached-editor appscode/kubedbcom-memcached-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-memcached-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-memcached-editor appscode/kubedbcom-memcached-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Memcached Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `kubedbcom-memcached-editor`: ```bash -$ helm upgrade -i kubedbcom-memcached-editor appscode/kubedbcom-memcached-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-memcached-editor appscode/kubedbcom-memcached-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Memcached Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -114,12 +114,12 @@ The following table lists the configurable parameters of the `kubedbcom-memcache Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-memcached-editor appscode/kubedbcom-memcached-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-memcached-editor appscode/kubedbcom-memcached-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-memcached-editor appscode/kubedbcom-memcached-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-memcached-editor appscode/kubedbcom-memcached-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-memcached-editor/ui/edit-ui.yaml b/charts/kubedbcom-memcached-editor/ui/edit-ui.yaml index 83c11c3f8a..419bdf6088 100644 --- a/charts/kubedbcom-memcached-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-memcached-editor/ui/edit-ui.yaml @@ -442,7 +442,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace diff --git a/charts/kubedbcom-mongodb-editor-options/Chart.yaml b/charts/kubedbcom-mongodb-editor-options/Chart.yaml index 1e629946b9..925cc21d0f 100644 --- a/charts/kubedbcom-mongodb-editor-options/Chart.yaml +++ b/charts/kubedbcom-mongodb-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-mongodb-editor-options description: MongoDB Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-mongodb-editor-options/README.md b/charts/kubedbcom-mongodb-editor-options/README.md index c9ecc3765a..d1c478356f 100644 --- a/charts/kubedbcom-mongodb-editor-options/README.md +++ b/charts/kubedbcom-mongodb-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-mongodb-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-mongodb-editor-options appscode/kubedbcom-mongodb-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-mongodb-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-mongodb-editor-options appscode/kubedbcom-mongodb-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDB Editor UI Options on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `kubedbcom-mongodb-editor-options`: ```bash -$ helm upgrade -i kubedbcom-mongodb-editor-options appscode/kubedbcom-mongodb-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-mongodb-editor-options appscode/kubedbcom-mongodb-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a MongoDB Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -316,12 +316,12 @@ The following table lists the configurable parameters of the `kubedbcom-mongodb- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-mongodb-editor-options appscode/kubedbcom-mongodb-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-mongodb-editor-options appscode/kubedbcom-mongodb-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-mongodb-editor-options appscode/kubedbcom-mongodb-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-mongodb-editor-options appscode/kubedbcom-mongodb-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-mongodb-editor/Chart.yaml b/charts/kubedbcom-mongodb-editor/Chart.yaml index df11b8c8b2..beaf67a963 100644 --- a/charts/kubedbcom-mongodb-editor/Chart.yaml +++ b/charts/kubedbcom-mongodb-editor/Chart.yaml @@ -2,51 +2,21 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1","resource":"mongodbs"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComMongoDBAutoscaler,catalogAppscodeComMongoDBBinding,certManagerIoIssuer_ca,coreKubestashComBackupBlueprint,coreKubestashComBackupConfiguration,coreKubestashComRestoreSession,gitopsKubedbComMongoDB,kubedbComMongoDB,monitoringCoreosComServiceMonitor,secret_auth,secret_config,secret_configserver_config,secret_encryption_secret,secret_init_repo_cred,secret_mongos_config,secret_repo_cred,secret_shard_config,stashAppscodeComBackupConfiguration,stashAppscodeComRepository_init_repo,stashAppscodeComRepository_repo,stashAppscodeComRestoreSession_init - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: MongoDBAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: MongoDBBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: core.kubestash.com - kind: BackupBlueprint - version: v1alpha1 - - group: core.kubestash.com - kind: BackupConfiguration - version: v1alpha1 - - group: core.kubestash.com - kind: RestoreSession - version: v1alpha1 - - group: gitops.kubedb.com - kind: MongoDB - version: v1alpha1 - - group: kubedb.com - kind: MongoDB - version: v1 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 - - group: stash.appscode.com - kind: BackupConfiguration - version: v1beta1 - - group: stash.appscode.com - kind: Repository - version: v1alpha1 - - group: stash.appscode.com - kind: RestoreSession - version: v1beta1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: MongoDBAutoscaler\n version: v1alpha1\n- group:\ + \ catalog.appscode.com\n kind: MongoDBBinding\n version: v1alpha1\n- group:\ + \ cert-manager.io\n kind: Issuer\n version: v1\n- group: core.kubestash.com\n\ + \ kind: BackupBlueprint\n version: v1alpha1\n- group: core.kubestash.com\n \ + \ kind: BackupConfiguration\n version: v1alpha1\n- group: core.kubestash.com\n\ + \ kind: RestoreSession\n version: v1alpha1\n- group: gitops.kubedb.com\n kind:\ + \ MongoDB\n version: v1alpha1\n- group: kubedb.com\n kind: MongoDB\n version:\ + \ v1\n- group: monitoring.coreos.com\n kind: PrometheusRule\n version: v1\n\ + - group: monitoring.coreos.com\n kind: ServiceMonitor\n version: v1\n- group:\ + \ stash.appscode.com\n kind: BackupConfiguration\n version: v1beta1\n- group:\ + \ stash.appscode.com\n kind: Repository\n version: v1alpha1\n- group: stash.appscode.com\n\ + \ kind: RestoreSession\n version: v1beta1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MongoDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -58,4 +28,4 @@ maintainers: name: appscode name: kubedbcom-mongodb-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-mongodb-editor/README.md b/charts/kubedbcom-mongodb-editor/README.md index 14eb0eb713..ee9de61054 100644 --- a/charts/kubedbcom-mongodb-editor/README.md +++ b/charts/kubedbcom-mongodb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-mongodb-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-mongodb-editor appscode/kubedbcom-mongodb-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-mongodb-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-mongodb-editor appscode/kubedbcom-mongodb-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDB Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `kubedbcom-mongodb-editor`: ```bash -$ helm upgrade -i kubedbcom-mongodb-editor appscode/kubedbcom-mongodb-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-mongodb-editor appscode/kubedbcom-mongodb-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MongoDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -220,12 +220,12 @@ The following table lists the configurable parameters of the `kubedbcom-mongodb- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-mongodb-editor appscode/kubedbcom-mongodb-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-mongodb-editor appscode/kubedbcom-mongodb-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-mongodb-editor appscode/kubedbcom-mongodb-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-mongodb-editor appscode/kubedbcom-mongodb-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-mongodb-editor/ui/create-ui.yaml b/charts/kubedbcom-mongodb-editor/ui/create-ui.yaml index 11ad7c5eba..0b37c4cb75 100644 --- a/charts/kubedbcom-mongodb-editor/ui/create-ui.yaml +++ b/charts/kubedbcom-mongodb-editor/ui/create-ui.yaml @@ -123,7 +123,7 @@ steps: - alias: reusable_alert chart: name: uibytebuildersdev-component-alert - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/form/properties/alert @@ -335,7 +335,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 functionCallbacks: getAliasOptions: $ref: functions#/getAliasOptions @@ -457,7 +457,7 @@ steps: - alias: repository_create_init chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -493,7 +493,7 @@ steps: - alias: runtime_settings_init chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -582,7 +582,7 @@ steps: - alias: repository_create_backup chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -668,7 +668,7 @@ steps: - alias: runtime_settings_backup chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -948,7 +948,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -968,7 +968,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -987,7 +987,7 @@ steps: - alias: pod_template_shard chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -1003,7 +1003,7 @@ steps: - alias: pod_template_configserver chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -1019,7 +1019,7 @@ steps: - alias: pod_template_mongos chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -1039,7 +1039,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComMongoDB/properties/spec/properties/serviceTemplates diff --git a/charts/kubedbcom-mongodb-editor/ui/edit-ui.yaml b/charts/kubedbcom-mongodb-editor/ui/edit-ui.yaml index e81d6f3236..66d49b3746 100644 --- a/charts/kubedbcom-mongodb-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-mongodb-editor/ui/edit-ui.yaml @@ -89,7 +89,7 @@ steps: - alias: reusable_alert chart: name: uibytebuildersdev-component-alert - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/form/properties/alert @@ -371,7 +371,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComMongoDB/properties/spec/properties/tls/properties/certificates @@ -492,7 +492,7 @@ steps: - alias: repository_create_init chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -528,7 +528,7 @@ steps: - alias: runtime_settings_init chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -892,7 +892,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -918,7 +918,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -942,7 +942,7 @@ steps: - alias: pod_template_shard chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -963,7 +963,7 @@ steps: - alias: pod_template_configserver chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -984,7 +984,7 @@ steps: - alias: pod_template_mongos chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -1008,7 +1008,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComMongoDB/properties/spec/properties/serviceTemplates diff --git a/charts/kubedbcom-mssqlserver-editor-options/Chart.yaml b/charts/kubedbcom-mssqlserver-editor-options/Chart.yaml index 353235441a..d5d2cebd24 100644 --- a/charts/kubedbcom-mssqlserver-editor-options/Chart.yaml +++ b/charts/kubedbcom-mssqlserver-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-mssqlserver-editor-options description: MSSQLServer Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-mssqlserver-editor-options/README.md b/charts/kubedbcom-mssqlserver-editor-options/README.md index 0982c919ea..16e452867a 100644 --- a/charts/kubedbcom-mssqlserver-editor-options/README.md +++ b/charts/kubedbcom-mssqlserver-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-mssqlserver-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-mssqlserver-editor-options appscode/kubedbcom-mssqlserver-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-mssqlserver-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-mssqlserver-editor-options appscode/kubedbcom-mssqlserver-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServer Editor UI Options on a [Kubernetes](http://kube To install/upgrade the chart with the release name `kubedbcom-mssqlserver-editor-options`: ```bash -$ helm upgrade -i kubedbcom-mssqlserver-editor-options appscode/kubedbcom-mssqlserver-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-mssqlserver-editor-options appscode/kubedbcom-mssqlserver-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLServer Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -216,12 +216,12 @@ The following table lists the configurable parameters of the `kubedbcom-mssqlser Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-mssqlserver-editor-options appscode/kubedbcom-mssqlserver-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-mssqlserver-editor-options appscode/kubedbcom-mssqlserver-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-mssqlserver-editor-options appscode/kubedbcom-mssqlserver-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-mssqlserver-editor-options appscode/kubedbcom-mssqlserver-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-mssqlserver-editor/Chart.yaml b/charts/kubedbcom-mssqlserver-editor/Chart.yaml index b23dd7451a..b856536faf 100644 --- a/charts/kubedbcom-mssqlserver-editor/Chart.yaml +++ b/charts/kubedbcom-mssqlserver-editor/Chart.yaml @@ -2,42 +2,19 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1alpha2","resource":"mssqlservers"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComMSSQLServerAutoscaler,catalogAppscodeComMSSQLServerBinding,certManagerIoIssuer_ca,coreKubestashComBackupBlueprint,coreKubestashComBackupConfiguration,coreKubestashComRestoreSession,gitopsKubedbComMSSQLServer,kubedbComMSSQLServer,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: MSSQLServerAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: MSSQLServerBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: core.kubestash.com - kind: BackupBlueprint - version: v1alpha1 - - group: core.kubestash.com - kind: BackupConfiguration - version: v1alpha1 - - group: core.kubestash.com - kind: RestoreSession - version: v1alpha1 - - group: gitops.kubedb.com - kind: MSSQLServer - version: v1alpha1 - - group: kubedb.com - kind: MSSQLServer - version: v1alpha2 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: MSSQLServerAutoscaler\n version: v1alpha1\n\ + - group: catalog.appscode.com\n kind: MSSQLServerBinding\n version: v1alpha1\n\ + - group: cert-manager.io\n kind: Issuer\n version: v1\n- group: core.kubestash.com\n\ + \ kind: BackupBlueprint\n version: v1alpha1\n- group: core.kubestash.com\n \ + \ kind: BackupConfiguration\n version: v1alpha1\n- group: core.kubestash.com\n\ + \ kind: RestoreSession\n version: v1alpha1\n- group: gitops.kubedb.com\n kind:\ + \ MSSQLServer\n version: v1alpha1\n- group: kubedb.com\n kind: MSSQLServer\n\ + \ version: v1alpha2\n- group: monitoring.coreos.com\n kind: PrometheusRule\n\ + \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ + \ v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLServer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -49,4 +26,4 @@ maintainers: name: appscode name: kubedbcom-mssqlserver-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-mssqlserver-editor/README.md b/charts/kubedbcom-mssqlserver-editor/README.md index f07de6998f..6226d15bc8 100644 --- a/charts/kubedbcom-mssqlserver-editor/README.md +++ b/charts/kubedbcom-mssqlserver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-mssqlserver-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-mssqlserver-editor appscode/kubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-mssqlserver-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-mssqlserver-editor appscode/kubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServer Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `kubedbcom-mssqlserver-editor`: ```bash -$ helm upgrade -i kubedbcom-mssqlserver-editor appscode/kubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-mssqlserver-editor appscode/kubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLServer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -136,12 +136,12 @@ The following table lists the configurable parameters of the `kubedbcom-mssqlser Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-mssqlserver-editor appscode/kubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-mssqlserver-editor appscode/kubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-mssqlserver-editor appscode/kubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-mssqlserver-editor appscode/kubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-mssqlserver-editor/ui/edit-ui.yaml b/charts/kubedbcom-mssqlserver-editor/ui/edit-ui.yaml index 793515ec00..7206dec405 100644 --- a/charts/kubedbcom-mssqlserver-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-mssqlserver-editor/ui/edit-ui.yaml @@ -740,7 +740,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace diff --git a/charts/kubedbcom-mysql-editor-options/Chart.yaml b/charts/kubedbcom-mysql-editor-options/Chart.yaml index eda1f9668d..638aa0095d 100644 --- a/charts/kubedbcom-mysql-editor-options/Chart.yaml +++ b/charts/kubedbcom-mysql-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-mysql-editor-options description: MySQL Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-mysql-editor-options/README.md b/charts/kubedbcom-mysql-editor-options/README.md index 92d4137370..23eb3c5503 100644 --- a/charts/kubedbcom-mysql-editor-options/README.md +++ b/charts/kubedbcom-mysql-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-mysql-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-mysql-editor-options appscode/kubedbcom-mysql-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-mysql-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-mysql-editor-options appscode/kubedbcom-mysql-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQL Editor UI Options on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `kubedbcom-mysql-editor-options`: ```bash -$ helm upgrade -i kubedbcom-mysql-editor-options appscode/kubedbcom-mysql-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-mysql-editor-options appscode/kubedbcom-mysql-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a MySQL Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -311,12 +311,12 @@ The following table lists the configurable parameters of the `kubedbcom-mysql-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-mysql-editor-options appscode/kubedbcom-mysql-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-mysql-editor-options appscode/kubedbcom-mysql-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-mysql-editor-options appscode/kubedbcom-mysql-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-mysql-editor-options appscode/kubedbcom-mysql-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-mysql-editor/Chart.yaml b/charts/kubedbcom-mysql-editor/Chart.yaml index f4eb4d813d..dbd548179b 100644 --- a/charts/kubedbcom-mysql-editor/Chart.yaml +++ b/charts/kubedbcom-mysql-editor/Chart.yaml @@ -2,51 +2,20 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1","resource":"mysqls"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComMySQLAutoscaler,catalogAppscodeComMySQLBinding,certManagerIoIssuer_ca,coreKubestashComBackupBlueprint,coreKubestashComBackupConfiguration,coreKubestashComRestoreSession,gitopsKubedbComMySQL,kubedbComMySQL,monitoringCoreosComServiceMonitor,secret_auth,secret_config,secret_encryption_secret,secret_init_repo_cred,secret_repo_cred,stashAppscodeComBackupConfiguration,stashAppscodeComRepository_init_repo,stashAppscodeComRepository_repo,stashAppscodeComRestoreSession_init - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: MySQLAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: MySQLBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: core.kubestash.com - kind: BackupBlueprint - version: v1alpha1 - - group: core.kubestash.com - kind: BackupConfiguration - version: v1alpha1 - - group: core.kubestash.com - kind: RestoreSession - version: v1alpha1 - - group: gitops.kubedb.com - kind: MySQL - version: v1alpha1 - - group: kubedb.com - kind: MySQL - version: v1 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 - - group: stash.appscode.com - kind: BackupConfiguration - version: v1beta1 - - group: stash.appscode.com - kind: Repository - version: v1alpha1 - - group: stash.appscode.com - kind: RestoreSession - version: v1beta1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: MySQLAutoscaler\n version: v1alpha1\n- group:\ + \ catalog.appscode.com\n kind: MySQLBinding\n version: v1alpha1\n- group: cert-manager.io\n\ + \ kind: Issuer\n version: v1\n- group: core.kubestash.com\n kind: BackupBlueprint\n\ + \ version: v1alpha1\n- group: core.kubestash.com\n kind: BackupConfiguration\n\ + \ version: v1alpha1\n- group: core.kubestash.com\n kind: RestoreSession\n version:\ + \ v1alpha1\n- group: gitops.kubedb.com\n kind: MySQL\n version: v1alpha1\n-\ + \ group: kubedb.com\n kind: MySQL\n version: v1\n- group: monitoring.coreos.com\n\ + \ kind: PrometheusRule\n version: v1\n- group: monitoring.coreos.com\n kind:\ + \ ServiceMonitor\n version: v1\n- group: stash.appscode.com\n kind: BackupConfiguration\n\ + \ version: v1beta1\n- group: stash.appscode.com\n kind: Repository\n version:\ + \ v1alpha1\n- group: stash.appscode.com\n kind: RestoreSession\n version: v1beta1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MySQL Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -58,4 +27,4 @@ maintainers: name: appscode name: kubedbcom-mysql-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-mysql-editor/README.md b/charts/kubedbcom-mysql-editor/README.md index 13d9feeb3e..fc40a25a90 100644 --- a/charts/kubedbcom-mysql-editor/README.md +++ b/charts/kubedbcom-mysql-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-mysql-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-mysql-editor appscode/kubedbcom-mysql-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-mysql-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-mysql-editor appscode/kubedbcom-mysql-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQL Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `kubedbcom-mysql-editor`: ```bash -$ helm upgrade -i kubedbcom-mysql-editor appscode/kubedbcom-mysql-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-mysql-editor appscode/kubedbcom-mysql-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MySQL Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -233,12 +233,12 @@ The following table lists the configurable parameters of the `kubedbcom-mysql-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-mysql-editor appscode/kubedbcom-mysql-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-mysql-editor appscode/kubedbcom-mysql-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-mysql-editor appscode/kubedbcom-mysql-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-mysql-editor appscode/kubedbcom-mysql-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-mysql-editor/ui/create-ui.yaml b/charts/kubedbcom-mysql-editor/ui/create-ui.yaml index d3f6fe8056..ac39044a95 100644 --- a/charts/kubedbcom-mysql-editor/ui/create-ui.yaml +++ b/charts/kubedbcom-mysql-editor/ui/create-ui.yaml @@ -139,7 +139,7 @@ steps: - alias: reusable_alert chart: name: uibytebuildersdev-component-alert - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/form/properties/alert @@ -266,7 +266,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 functionCallbacks: getAliasOptions: $ref: functions#/getAliasOptions @@ -388,7 +388,7 @@ steps: - alias: repository_create_init chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -424,7 +424,7 @@ steps: - alias: runtime_settings_init chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -513,7 +513,7 @@ steps: - alias: repository_create_backup chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -599,7 +599,7 @@ steps: - alias: runtime_settings_backup chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -879,7 +879,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -899,7 +899,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -915,7 +915,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComMySQL/properties/spec/properties/serviceTemplates diff --git a/charts/kubedbcom-mysql-editor/ui/edit-ui.yaml b/charts/kubedbcom-mysql-editor/ui/edit-ui.yaml index e5826f25c0..6f122333c3 100644 --- a/charts/kubedbcom-mysql-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-mysql-editor/ui/edit-ui.yaml @@ -89,7 +89,7 @@ steps: - alias: reusable_alert chart: name: uibytebuildersdev-component-alert - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/form/properties/alert @@ -280,7 +280,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComMySQL/properties/spec/properties/tls/properties/certificates @@ -401,7 +401,7 @@ steps: - alias: repository_create_init chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -437,7 +437,7 @@ steps: - alias: runtime_settings_init chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -801,7 +801,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -822,7 +822,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -842,7 +842,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComMySQL/properties/spec/properties/serviceTemplates diff --git a/charts/kubedbcom-oracle-editor-options/Chart.yaml b/charts/kubedbcom-oracle-editor-options/Chart.yaml index 4971104956..6f47cb5902 100644 --- a/charts/kubedbcom-oracle-editor-options/Chart.yaml +++ b/charts/kubedbcom-oracle-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-oracle-editor-options description: Oracle Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-oracle-editor-options/README.md b/charts/kubedbcom-oracle-editor-options/README.md index 6a29f34445..00e934bdb4 100644 --- a/charts/kubedbcom-oracle-editor-options/README.md +++ b/charts/kubedbcom-oracle-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-oracle-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-oracle-editor-options appscode/kubedbcom-oracle-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-oracle-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-oracle-editor-options appscode/kubedbcom-oracle-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Oracle Editor UI Options on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `kubedbcom-oracle-editor-options`: ```bash -$ helm upgrade -i kubedbcom-oracle-editor-options appscode/kubedbcom-oracle-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-oracle-editor-options appscode/kubedbcom-oracle-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Oracle Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -147,12 +147,12 @@ The following table lists the configurable parameters of the `kubedbcom-oracle-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-oracle-editor-options appscode/kubedbcom-oracle-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-oracle-editor-options appscode/kubedbcom-oracle-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-oracle-editor-options appscode/kubedbcom-oracle-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-oracle-editor-options appscode/kubedbcom-oracle-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-oracle-editor/Chart.yaml b/charts/kubedbcom-oracle-editor/Chart.yaml index 6fa97c28d1..1aba15fb98 100644 --- a/charts/kubedbcom-oracle-editor/Chart.yaml +++ b/charts/kubedbcom-oracle-editor/Chart.yaml @@ -1,30 +1,15 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1alpha2","resource":"oracles"}' meta.x-helm.dev/resource-keys: certManagerIoIssuer_ca,coreKubestashComBackupBlueprint,coreKubestashComBackupConfiguration,coreKubestashComRestoreSession,kubedbComOracle,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: core.kubestash.com - kind: BackupBlueprint - version: v1alpha1 - - group: core.kubestash.com - kind: BackupConfiguration - version: v1alpha1 - - group: core.kubestash.com - kind: RestoreSession - version: v1alpha1 - - group: kubedb.com - kind: Oracle - version: v1alpha2 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ cert-manager.io\n kind: Issuer\n version: v1\n- group: core.kubestash.com\n\ + \ kind: BackupBlueprint\n version: v1alpha1\n- group: core.kubestash.com\n \ + \ kind: BackupConfiguration\n version: v1alpha1\n- group: core.kubestash.com\n\ + \ kind: RestoreSession\n version: v1alpha1\n- group: kubedb.com\n kind: Oracle\n\ + \ version: v1alpha2\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n\ + \ version: v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Oracle Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -36,4 +21,4 @@ maintainers: name: appscode name: kubedbcom-oracle-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-oracle-editor/README.md b/charts/kubedbcom-oracle-editor/README.md index 3158258e54..1d0a04e55a 100644 --- a/charts/kubedbcom-oracle-editor/README.md +++ b/charts/kubedbcom-oracle-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-oracle-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-oracle-editor appscode/kubedbcom-oracle-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-oracle-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-oracle-editor appscode/kubedbcom-oracle-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Oracle Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `kubedbcom-oracle-editor`: ```bash -$ helm upgrade -i kubedbcom-oracle-editor appscode/kubedbcom-oracle-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-oracle-editor appscode/kubedbcom-oracle-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Oracle Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -67,12 +67,12 @@ The following table lists the configurable parameters of the `kubedbcom-oracle-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-oracle-editor appscode/kubedbcom-oracle-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-oracle-editor appscode/kubedbcom-oracle-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-oracle-editor appscode/kubedbcom-oracle-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-oracle-editor appscode/kubedbcom-oracle-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-perconaxtradb-editor-options/Chart.yaml b/charts/kubedbcom-perconaxtradb-editor-options/Chart.yaml index e02765b577..3f4798fc2b 100644 --- a/charts/kubedbcom-perconaxtradb-editor-options/Chart.yaml +++ b/charts/kubedbcom-perconaxtradb-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-perconaxtradb-editor-options description: PerconaXtraDB Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-perconaxtradb-editor-options/README.md b/charts/kubedbcom-perconaxtradb-editor-options/README.md index ef0d796bc7..6d8e36649b 100644 --- a/charts/kubedbcom-perconaxtradb-editor-options/README.md +++ b/charts/kubedbcom-perconaxtradb-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-perconaxtradb-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-perconaxtradb-editor-options appscode/kubedbcom-perconaxtradb-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-perconaxtradb-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-perconaxtradb-editor-options appscode/kubedbcom-perconaxtradb-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PerconaXtraDB Editor UI Options on a [Kubernetes](http://ku To install/upgrade the chart with the release name `kubedbcom-perconaxtradb-editor-options`: ```bash -$ helm upgrade -i kubedbcom-perconaxtradb-editor-options appscode/kubedbcom-perconaxtradb-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-perconaxtradb-editor-options appscode/kubedbcom-perconaxtradb-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a PerconaXtraDB Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -256,12 +256,12 @@ The following table lists the configurable parameters of the `kubedbcom-perconax Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-perconaxtradb-editor-options appscode/kubedbcom-perconaxtradb-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-perconaxtradb-editor-options appscode/kubedbcom-perconaxtradb-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-perconaxtradb-editor-options appscode/kubedbcom-perconaxtradb-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-perconaxtradb-editor-options appscode/kubedbcom-perconaxtradb-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-perconaxtradb-editor/Chart.yaml b/charts/kubedbcom-perconaxtradb-editor/Chart.yaml index a94b23c857..2494101c04 100644 --- a/charts/kubedbcom-perconaxtradb-editor/Chart.yaml +++ b/charts/kubedbcom-perconaxtradb-editor/Chart.yaml @@ -2,33 +2,15 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1","resource":"perconaxtradbs"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComPerconaXtraDBAutoscaler,catalogAppscodeComPerconaXtraDBBinding,certManagerIoIssuer_ca,gitopsKubedbComPerconaXtraDB,kubedbComPerconaXtraDB,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: PerconaXtraDBAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: PerconaXtraDBBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: gitops.kubedb.com - kind: PerconaXtraDB - version: v1alpha1 - - group: kubedb.com - kind: PerconaXtraDB - version: v1 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: PerconaXtraDBAutoscaler\n version: v1alpha1\n\ + - group: catalog.appscode.com\n kind: PerconaXtraDBBinding\n version: v1alpha1\n\ + - group: cert-manager.io\n kind: Issuer\n version: v1\n- group: gitops.kubedb.com\n\ + \ kind: PerconaXtraDB\n version: v1alpha1\n- group: kubedb.com\n kind: PerconaXtraDB\n\ + \ version: v1\n- group: monitoring.coreos.com\n kind: PrometheusRule\n version:\ + \ v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PerconaXtraDB Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -40,4 +22,4 @@ maintainers: name: appscode name: kubedbcom-perconaxtradb-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-perconaxtradb-editor/README.md b/charts/kubedbcom-perconaxtradb-editor/README.md index 5f3b42f639..48b44e9690 100644 --- a/charts/kubedbcom-perconaxtradb-editor/README.md +++ b/charts/kubedbcom-perconaxtradb-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-perconaxtradb-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-perconaxtradb-editor appscode/kubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-perconaxtradb-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-perconaxtradb-editor appscode/kubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PerconaXtraDB Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `kubedbcom-perconaxtradb-editor`: ```bash -$ helm upgrade -i kubedbcom-perconaxtradb-editor appscode/kubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-perconaxtradb-editor appscode/kubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PerconaXtraDB Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -185,12 +185,12 @@ The following table lists the configurable parameters of the `kubedbcom-perconax Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-perconaxtradb-editor appscode/kubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-perconaxtradb-editor appscode/kubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-perconaxtradb-editor appscode/kubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-perconaxtradb-editor appscode/kubedbcom-perconaxtradb-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-perconaxtradb-editor/ui/edit-ui.yaml b/charts/kubedbcom-perconaxtradb-editor/ui/edit-ui.yaml index 804f596224..a40268f0da 100644 --- a/charts/kubedbcom-perconaxtradb-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-perconaxtradb-editor/ui/edit-ui.yaml @@ -619,7 +619,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace diff --git a/charts/kubedbcom-pgbouncer-editor-options/Chart.yaml b/charts/kubedbcom-pgbouncer-editor-options/Chart.yaml index a29c9226cb..8ef4263367 100644 --- a/charts/kubedbcom-pgbouncer-editor-options/Chart.yaml +++ b/charts/kubedbcom-pgbouncer-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-pgbouncer-editor-options description: PgBouncer Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-pgbouncer-editor-options/README.md b/charts/kubedbcom-pgbouncer-editor-options/README.md index 9ce19fddd5..ad53fd36b7 100644 --- a/charts/kubedbcom-pgbouncer-editor-options/README.md +++ b/charts/kubedbcom-pgbouncer-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-pgbouncer-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-pgbouncer-editor-options appscode/kubedbcom-pgbouncer-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-pgbouncer-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-pgbouncer-editor-options appscode/kubedbcom-pgbouncer-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncer Editor UI Options on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `kubedbcom-pgbouncer-editor-options`: ```bash -$ helm upgrade -i kubedbcom-pgbouncer-editor-options appscode/kubedbcom-pgbouncer-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-pgbouncer-editor-options appscode/kubedbcom-pgbouncer-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a PgBouncer Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -178,12 +178,12 @@ The following table lists the configurable parameters of the `kubedbcom-pgbounce Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-pgbouncer-editor-options appscode/kubedbcom-pgbouncer-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-pgbouncer-editor-options appscode/kubedbcom-pgbouncer-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-pgbouncer-editor-options appscode/kubedbcom-pgbouncer-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-pgbouncer-editor-options appscode/kubedbcom-pgbouncer-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-pgbouncer-editor/Chart.yaml b/charts/kubedbcom-pgbouncer-editor/Chart.yaml index 51372cb3e1..775cddc398 100644 --- a/charts/kubedbcom-pgbouncer-editor/Chart.yaml +++ b/charts/kubedbcom-pgbouncer-editor/Chart.yaml @@ -1,30 +1,15 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1","resource":"pgbouncers"}' meta.x-helm.dev/resource-keys: autoscalingKubedbComPgBouncerAutoscaler,catalogAppscodeComPgBouncerBinding,certManagerIoIssuer_ca,gitopsKubedbComPgBouncer,kubedbComPgBouncer,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: PgBouncerAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: PgBouncerBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: gitops.kubedb.com - kind: PgBouncer - version: v1alpha1 - - group: kubedb.com - kind: PgBouncer - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: PgBouncerAutoscaler\n version: v1alpha1\n-\ + \ group: catalog.appscode.com\n kind: PgBouncerBinding\n version: v1alpha1\n\ + - group: cert-manager.io\n kind: Issuer\n version: v1\n- group: gitops.kubedb.com\n\ + \ kind: PgBouncer\n version: v1alpha1\n- group: kubedb.com\n kind: PgBouncer\n\ + \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ + \ v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PgBouncer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -36,4 +21,4 @@ maintainers: name: appscode name: kubedbcom-pgbouncer-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-pgbouncer-editor/README.md b/charts/kubedbcom-pgbouncer-editor/README.md index f1d0bdc5dd..9511b8adeb 100644 --- a/charts/kubedbcom-pgbouncer-editor/README.md +++ b/charts/kubedbcom-pgbouncer-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-pgbouncer-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-pgbouncer-editor appscode/kubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-pgbouncer-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-pgbouncer-editor appscode/kubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncer Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `kubedbcom-pgbouncer-editor`: ```bash -$ helm upgrade -i kubedbcom-pgbouncer-editor appscode/kubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-pgbouncer-editor appscode/kubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PgBouncer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -103,12 +103,12 @@ The following table lists the configurable parameters of the `kubedbcom-pgbounce Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-pgbouncer-editor appscode/kubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-pgbouncer-editor appscode/kubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-pgbouncer-editor appscode/kubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-pgbouncer-editor appscode/kubedbcom-pgbouncer-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-pgbouncer-editor/ui/create-ui.yaml b/charts/kubedbcom-pgbouncer-editor/ui/create-ui.yaml index 1ab8fceba8..0d5b560625 100644 --- a/charts/kubedbcom-pgbouncer-editor/ui/create-ui.yaml +++ b/charts/kubedbcom-pgbouncer-editor/ui/create-ui.yaml @@ -254,7 +254,7 @@ steps: - alias: reusable_health_checker chart: name: uibytebuildersdev-component-health-checker - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComPgBouncer/properties/spec/properties/healthChecker @@ -325,7 +325,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 functionCallbacks: getAliasOptions: $ref: functions#/getAliasOptions @@ -543,7 +543,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -563,7 +563,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -579,7 +579,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComPgBouncer/properties/spec/properties/serviceTemplates diff --git a/charts/kubedbcom-pgbouncer-editor/ui/edit-ui.yaml b/charts/kubedbcom-pgbouncer-editor/ui/edit-ui.yaml index 42a7e2762b..a7234cd0f8 100644 --- a/charts/kubedbcom-pgbouncer-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-pgbouncer-editor/ui/edit-ui.yaml @@ -234,7 +234,7 @@ steps: - alias: reusable_health_checker chart: name: uibytebuildersdev-component-health-checker - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComPgBouncer/properties/spec/properties/healthChecker @@ -308,7 +308,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComPgBouncer/properties/spec/properties/tls/properties/certificates @@ -537,7 +537,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -557,7 +557,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -576,7 +576,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComPgBouncer/properties/spec/properties/serviceTemplates diff --git a/charts/kubedbcom-pgpool-editor-options/Chart.yaml b/charts/kubedbcom-pgpool-editor-options/Chart.yaml index 40e9d75074..3666ff2571 100644 --- a/charts/kubedbcom-pgpool-editor-options/Chart.yaml +++ b/charts/kubedbcom-pgpool-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-pgpool-editor-options description: Pgpool Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-pgpool-editor-options/README.md b/charts/kubedbcom-pgpool-editor-options/README.md index b122765983..331faae12d 100644 --- a/charts/kubedbcom-pgpool-editor-options/README.md +++ b/charts/kubedbcom-pgpool-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-pgpool-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-pgpool-editor-options appscode/kubedbcom-pgpool-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-pgpool-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-pgpool-editor-options appscode/kubedbcom-pgpool-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Pgpool Editor UI Options on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `kubedbcom-pgpool-editor-options`: ```bash -$ helm upgrade -i kubedbcom-pgpool-editor-options appscode/kubedbcom-pgpool-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-pgpool-editor-options appscode/kubedbcom-pgpool-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Pgpool Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -193,12 +193,12 @@ The following table lists the configurable parameters of the `kubedbcom-pgpool-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-pgpool-editor-options appscode/kubedbcom-pgpool-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-pgpool-editor-options appscode/kubedbcom-pgpool-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-pgpool-editor-options appscode/kubedbcom-pgpool-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-pgpool-editor-options appscode/kubedbcom-pgpool-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-pgpool-editor/Chart.yaml b/charts/kubedbcom-pgpool-editor/Chart.yaml index 5c443bf859..9e3a07c40b 100644 --- a/charts/kubedbcom-pgpool-editor/Chart.yaml +++ b/charts/kubedbcom-pgpool-editor/Chart.yaml @@ -2,33 +2,15 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1alpha2","resource":"pgpools"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComPgpoolAutoscaler,catalogAppscodeComPgpoolBinding,certManagerIoIssuer_ca,gitopsKubedbComPgpool,kubedbComPgpool,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: PgpoolAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: PgpoolBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: gitops.kubedb.com - kind: Pgpool - version: v1alpha1 - - group: kubedb.com - kind: Pgpool - version: v1alpha2 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: PgpoolAutoscaler\n version: v1alpha1\n- group:\ + \ catalog.appscode.com\n kind: PgpoolBinding\n version: v1alpha1\n- group: cert-manager.io\n\ + \ kind: Issuer\n version: v1\n- group: gitops.kubedb.com\n kind: Pgpool\n \ + \ version: v1alpha1\n- group: kubedb.com\n kind: Pgpool\n version: v1alpha2\n\ + - group: monitoring.coreos.com\n kind: PrometheusRule\n version: v1\n- group:\ + \ monitoring.coreos.com\n kind: ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Pgpool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -40,4 +22,4 @@ maintainers: name: appscode name: kubedbcom-pgpool-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-pgpool-editor/README.md b/charts/kubedbcom-pgpool-editor/README.md index d9eb71221d..54ba662b0a 100644 --- a/charts/kubedbcom-pgpool-editor/README.md +++ b/charts/kubedbcom-pgpool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-pgpool-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-pgpool-editor appscode/kubedbcom-pgpool-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-pgpool-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-pgpool-editor appscode/kubedbcom-pgpool-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Pgpool Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `kubedbcom-pgpool-editor`: ```bash -$ helm upgrade -i kubedbcom-pgpool-editor appscode/kubedbcom-pgpool-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-pgpool-editor appscode/kubedbcom-pgpool-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Pgpool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -119,12 +119,12 @@ The following table lists the configurable parameters of the `kubedbcom-pgpool-e Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-pgpool-editor appscode/kubedbcom-pgpool-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-pgpool-editor appscode/kubedbcom-pgpool-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-pgpool-editor appscode/kubedbcom-pgpool-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-pgpool-editor appscode/kubedbcom-pgpool-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-pgpool-editor/ui/edit-ui.yaml b/charts/kubedbcom-pgpool-editor/ui/edit-ui.yaml index 1c203cf9f9..95d8cfba24 100644 --- a/charts/kubedbcom-pgpool-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-pgpool-editor/ui/edit-ui.yaml @@ -442,7 +442,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace diff --git a/charts/kubedbcom-postgres-editor-options/Chart.yaml b/charts/kubedbcom-postgres-editor-options/Chart.yaml index e7893d90f9..22c604d61d 100644 --- a/charts/kubedbcom-postgres-editor-options/Chart.yaml +++ b/charts/kubedbcom-postgres-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-postgres-editor-options description: Postgres Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-postgres-editor-options/README.md b/charts/kubedbcom-postgres-editor-options/README.md index 91f46a845c..3fd60e0cad 100644 --- a/charts/kubedbcom-postgres-editor-options/README.md +++ b/charts/kubedbcom-postgres-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-postgres-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-postgres-editor-options appscode/kubedbcom-postgres-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-postgres-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-postgres-editor-options appscode/kubedbcom-postgres-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Postgres Editor UI Options on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `kubedbcom-postgres-editor-options`: ```bash -$ helm upgrade -i kubedbcom-postgres-editor-options appscode/kubedbcom-postgres-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-postgres-editor-options appscode/kubedbcom-postgres-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Postgres Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -285,12 +285,12 @@ The following table lists the configurable parameters of the `kubedbcom-postgres Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-postgres-editor-options appscode/kubedbcom-postgres-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-postgres-editor-options appscode/kubedbcom-postgres-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-postgres-editor-options appscode/kubedbcom-postgres-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-postgres-editor-options appscode/kubedbcom-postgres-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-postgres-editor/Chart.yaml b/charts/kubedbcom-postgres-editor/Chart.yaml index afb217725a..af5bda3325 100644 --- a/charts/kubedbcom-postgres-editor/Chart.yaml +++ b/charts/kubedbcom-postgres-editor/Chart.yaml @@ -2,51 +2,21 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1","resource":"postgreses"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComPostgresAutoscaler,catalogAppscodeComPostgresBinding,certManagerIoIssuer_ca,coreKubestashComBackupBlueprint,coreKubestashComBackupConfiguration,coreKubestashComRestoreSession,gitopsKubedbComPostgres,kubedbComPostgres,monitoringCoreosComServiceMonitor,secret_auth,secret_config,secret_encryption_secret,secret_init_repo_cred,secret_repo_cred,stashAppscodeComBackupConfiguration,stashAppscodeComRepository_init_repo,stashAppscodeComRepository_repo,stashAppscodeComRestoreSession_init - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: PostgresAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: PostgresBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: core.kubestash.com - kind: BackupBlueprint - version: v1alpha1 - - group: core.kubestash.com - kind: BackupConfiguration - version: v1alpha1 - - group: core.kubestash.com - kind: RestoreSession - version: v1alpha1 - - group: gitops.kubedb.com - kind: Postgres - version: v1alpha1 - - group: kubedb.com - kind: Postgres - version: v1 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 - - group: stash.appscode.com - kind: BackupConfiguration - version: v1beta1 - - group: stash.appscode.com - kind: Repository - version: v1alpha1 - - group: stash.appscode.com - kind: RestoreSession - version: v1beta1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: PostgresAutoscaler\n version: v1alpha1\n- group:\ + \ catalog.appscode.com\n kind: PostgresBinding\n version: v1alpha1\n- group:\ + \ cert-manager.io\n kind: Issuer\n version: v1\n- group: core.kubestash.com\n\ + \ kind: BackupBlueprint\n version: v1alpha1\n- group: core.kubestash.com\n \ + \ kind: BackupConfiguration\n version: v1alpha1\n- group: core.kubestash.com\n\ + \ kind: RestoreSession\n version: v1alpha1\n- group: gitops.kubedb.com\n kind:\ + \ Postgres\n version: v1alpha1\n- group: kubedb.com\n kind: Postgres\n version:\ + \ v1\n- group: monitoring.coreos.com\n kind: PrometheusRule\n version: v1\n\ + - group: monitoring.coreos.com\n kind: ServiceMonitor\n version: v1\n- group:\ + \ stash.appscode.com\n kind: BackupConfiguration\n version: v1beta1\n- group:\ + \ stash.appscode.com\n kind: Repository\n version: v1alpha1\n- group: stash.appscode.com\n\ + \ kind: RestoreSession\n version: v1beta1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Postgres Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -58,4 +28,4 @@ maintainers: name: appscode name: kubedbcom-postgres-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-postgres-editor/README.md b/charts/kubedbcom-postgres-editor/README.md index b86a60c0ea..4ff8255653 100644 --- a/charts/kubedbcom-postgres-editor/README.md +++ b/charts/kubedbcom-postgres-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-postgres-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-postgres-editor appscode/kubedbcom-postgres-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-postgres-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-postgres-editor appscode/kubedbcom-postgres-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Postgres Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `kubedbcom-postgres-editor`: ```bash -$ helm upgrade -i kubedbcom-postgres-editor appscode/kubedbcom-postgres-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-postgres-editor appscode/kubedbcom-postgres-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Postgres Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -211,12 +211,12 @@ The following table lists the configurable parameters of the `kubedbcom-postgres Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-postgres-editor appscode/kubedbcom-postgres-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-postgres-editor appscode/kubedbcom-postgres-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-postgres-editor appscode/kubedbcom-postgres-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-postgres-editor appscode/kubedbcom-postgres-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-postgres-editor/ui/create-ui.yaml b/charts/kubedbcom-postgres-editor/ui/create-ui.yaml index 604fc8a95c..2381bb0ec0 100644 --- a/charts/kubedbcom-postgres-editor/ui/create-ui.yaml +++ b/charts/kubedbcom-postgres-editor/ui/create-ui.yaml @@ -131,7 +131,7 @@ steps: - alias: reusable_alert chart: name: uibytebuildersdev-component-alert - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/form/properties/alert @@ -288,7 +288,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 functionCallbacks: getAliasOptions: $ref: functions#/getAliasOptions @@ -410,7 +410,7 @@ steps: - alias: repository_create_init chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -446,7 +446,7 @@ steps: - alias: runtime_settings_init chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -535,7 +535,7 @@ steps: - alias: repository_create_backup chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -621,7 +621,7 @@ steps: - alias: runtime_settings_backup chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -901,7 +901,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -921,7 +921,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -937,7 +937,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComPostgres/properties/spec/properties/serviceTemplates diff --git a/charts/kubedbcom-postgres-editor/ui/edit-ui.yaml b/charts/kubedbcom-postgres-editor/ui/edit-ui.yaml index 203bb3c695..cbe9f8795c 100644 --- a/charts/kubedbcom-postgres-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-postgres-editor/ui/edit-ui.yaml @@ -95,7 +95,7 @@ steps: - alias: reusable_alert chart: name: uibytebuildersdev-component-alert - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/form/properties/alert @@ -316,7 +316,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComPostgres/properties/spec/properties/tls/properties/certificates @@ -437,7 +437,7 @@ steps: - alias: repository_create_init chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -473,7 +473,7 @@ steps: - alias: runtime_settings_init chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -837,7 +837,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -858,7 +858,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -878,7 +878,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComPostgres/properties/spec/properties/serviceTemplates diff --git a/charts/kubedbcom-proxysql-editor-options/Chart.yaml b/charts/kubedbcom-proxysql-editor-options/Chart.yaml index 8451b87b94..3cbaa6134e 100644 --- a/charts/kubedbcom-proxysql-editor-options/Chart.yaml +++ b/charts/kubedbcom-proxysql-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-proxysql-editor-options description: ProxySQL Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-proxysql-editor-options/README.md b/charts/kubedbcom-proxysql-editor-options/README.md index 2835cb54b5..e7aa2922bc 100644 --- a/charts/kubedbcom-proxysql-editor-options/README.md +++ b/charts/kubedbcom-proxysql-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-proxysql-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-proxysql-editor-options appscode/kubedbcom-proxysql-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-proxysql-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-proxysql-editor-options appscode/kubedbcom-proxysql-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQL Editor UI Options on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `kubedbcom-proxysql-editor-options`: ```bash -$ helm upgrade -i kubedbcom-proxysql-editor-options appscode/kubedbcom-proxysql-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-proxysql-editor-options appscode/kubedbcom-proxysql-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a ProxySQL Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -200,12 +200,12 @@ The following table lists the configurable parameters of the `kubedbcom-proxysql Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-proxysql-editor-options appscode/kubedbcom-proxysql-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-proxysql-editor-options appscode/kubedbcom-proxysql-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-proxysql-editor-options appscode/kubedbcom-proxysql-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-proxysql-editor-options appscode/kubedbcom-proxysql-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-proxysql-editor/Chart.yaml b/charts/kubedbcom-proxysql-editor/Chart.yaml index cca3bde2b7..544379a906 100644 --- a/charts/kubedbcom-proxysql-editor/Chart.yaml +++ b/charts/kubedbcom-proxysql-editor/Chart.yaml @@ -2,33 +2,15 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1","resource":"proxysqls"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComProxySQLAutoscaler,catalogAppscodeComProxySQLBinding,certManagerIoIssuer_ca,gitopsKubedbComProxySQL,kubedbComProxySQL,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: ProxySQLAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: ProxySQLBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: gitops.kubedb.com - kind: ProxySQL - version: v1alpha1 - - group: kubedb.com - kind: ProxySQL - version: v1 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: ProxySQLAutoscaler\n version: v1alpha1\n- group:\ + \ catalog.appscode.com\n kind: ProxySQLBinding\n version: v1alpha1\n- group:\ + \ cert-manager.io\n kind: Issuer\n version: v1\n- group: gitops.kubedb.com\n\ + \ kind: ProxySQL\n version: v1alpha1\n- group: kubedb.com\n kind: ProxySQL\n\ + \ version: v1\n- group: monitoring.coreos.com\n kind: PrometheusRule\n version:\ + \ v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProxySQL Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -40,4 +22,4 @@ maintainers: name: appscode name: kubedbcom-proxysql-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-proxysql-editor/README.md b/charts/kubedbcom-proxysql-editor/README.md index 4fdd9c8ec5..436942e04c 100644 --- a/charts/kubedbcom-proxysql-editor/README.md +++ b/charts/kubedbcom-proxysql-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-proxysql-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-proxysql-editor appscode/kubedbcom-proxysql-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-proxysql-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-proxysql-editor appscode/kubedbcom-proxysql-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQL Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `kubedbcom-proxysql-editor`: ```bash -$ helm upgrade -i kubedbcom-proxysql-editor appscode/kubedbcom-proxysql-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-proxysql-editor appscode/kubedbcom-proxysql-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProxySQL Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -127,12 +127,12 @@ The following table lists the configurable parameters of the `kubedbcom-proxysql Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-proxysql-editor appscode/kubedbcom-proxysql-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-proxysql-editor appscode/kubedbcom-proxysql-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-proxysql-editor appscode/kubedbcom-proxysql-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-proxysql-editor appscode/kubedbcom-proxysql-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-proxysql-editor/ui/create-ui.yaml b/charts/kubedbcom-proxysql-editor/ui/create-ui.yaml index a4e135344c..e42a4cfc47 100644 --- a/charts/kubedbcom-proxysql-editor/ui/create-ui.yaml +++ b/charts/kubedbcom-proxysql-editor/ui/create-ui.yaml @@ -139,7 +139,7 @@ steps: - alias: reusable_alert chart: name: uibytebuildersdev-component-alert - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/form/properties/alert @@ -194,7 +194,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 functionCallbacks: getAliasOptions: $ref: functions#/getAliasOptions @@ -212,7 +212,7 @@ steps: - alias: reusable_health_checker chart: name: uibytebuildersdev-component-health-checker - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComProxySQL/properties/spec/properties/healthChecker @@ -645,7 +645,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -665,7 +665,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -681,7 +681,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComProxySQL/properties/spec/properties/serviceTemplates diff --git a/charts/kubedbcom-proxysql-editor/ui/edit-ui.yaml b/charts/kubedbcom-proxysql-editor/ui/edit-ui.yaml index 10888a27c6..7fbc42f244 100644 --- a/charts/kubedbcom-proxysql-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-proxysql-editor/ui/edit-ui.yaml @@ -104,7 +104,7 @@ steps: - alias: reusable_alert chart: name: uibytebuildersdev-component-alert - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/form/properties/alert @@ -170,7 +170,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 functionCallbacks: getAliasOptions: $ref: functions#/getAliasOptions @@ -188,7 +188,7 @@ steps: - alias: reusable_health_checker chart: name: uibytebuildersdev-component-health-checker - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComProxySQL/properties/spec/properties/healthChecker @@ -649,7 +649,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -678,7 +678,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -697,7 +697,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComProxySQL/properties/spec/properties/serviceTemplates diff --git a/charts/kubedbcom-rabbitmq-editor-options/Chart.yaml b/charts/kubedbcom-rabbitmq-editor-options/Chart.yaml index 06dbe959c5..0f22bfb29f 100644 --- a/charts/kubedbcom-rabbitmq-editor-options/Chart.yaml +++ b/charts/kubedbcom-rabbitmq-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-rabbitmq-editor-options description: RabbitMQ Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-rabbitmq-editor-options/README.md b/charts/kubedbcom-rabbitmq-editor-options/README.md index 30cdf973e7..fd5f360caf 100644 --- a/charts/kubedbcom-rabbitmq-editor-options/README.md +++ b/charts/kubedbcom-rabbitmq-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-rabbitmq-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-rabbitmq-editor-options appscode/kubedbcom-rabbitmq-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-rabbitmq-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-rabbitmq-editor-options appscode/kubedbcom-rabbitmq-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RabbitMQ Editor UI Options on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `kubedbcom-rabbitmq-editor-options`: ```bash -$ helm upgrade -i kubedbcom-rabbitmq-editor-options appscode/kubedbcom-rabbitmq-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-rabbitmq-editor-options appscode/kubedbcom-rabbitmq-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a RabbitMQ Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -196,12 +196,12 @@ The following table lists the configurable parameters of the `kubedbcom-rabbitmq Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-rabbitmq-editor-options appscode/kubedbcom-rabbitmq-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-rabbitmq-editor-options appscode/kubedbcom-rabbitmq-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-rabbitmq-editor-options appscode/kubedbcom-rabbitmq-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-rabbitmq-editor-options appscode/kubedbcom-rabbitmq-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-rabbitmq-editor/Chart.yaml b/charts/kubedbcom-rabbitmq-editor/Chart.yaml index 4f61dc342a..bd111a3c61 100644 --- a/charts/kubedbcom-rabbitmq-editor/Chart.yaml +++ b/charts/kubedbcom-rabbitmq-editor/Chart.yaml @@ -2,33 +2,16 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1alpha2","resource":"rabbitmqs"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComRabbitMQAutoscaler,catalogAppscodeComRabbitMQBinding,certManagerIoIssuer_ca,gitopsKubedbComRabbitMQ,kubedbComRabbitMQ,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: RabbitMQAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: RabbitMQBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: gitops.kubedb.com - kind: RabbitMQ - version: v1alpha1 - - group: kubedb.com - kind: RabbitMQ - version: v1alpha2 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: RabbitMQAutoscaler\n version: v1alpha1\n- group:\ + \ catalog.appscode.com\n kind: RabbitMQBinding\n version: v1alpha1\n- group:\ + \ cert-manager.io\n kind: Issuer\n version: v1\n- group: gitops.kubedb.com\n\ + \ kind: RabbitMQ\n version: v1alpha1\n- group: kubedb.com\n kind: RabbitMQ\n\ + \ version: v1alpha2\n- group: monitoring.coreos.com\n kind: PrometheusRule\n\ + \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ + \ v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RabbitMQ Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -40,4 +23,4 @@ maintainers: name: appscode name: kubedbcom-rabbitmq-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-rabbitmq-editor/README.md b/charts/kubedbcom-rabbitmq-editor/README.md index efb8dbaded..5f6017c28e 100644 --- a/charts/kubedbcom-rabbitmq-editor/README.md +++ b/charts/kubedbcom-rabbitmq-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-rabbitmq-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-rabbitmq-editor appscode/kubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-rabbitmq-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-rabbitmq-editor appscode/kubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RabbitMQ Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `kubedbcom-rabbitmq-editor`: ```bash -$ helm upgrade -i kubedbcom-rabbitmq-editor appscode/kubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-rabbitmq-editor appscode/kubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RabbitMQ Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -124,12 +124,12 @@ The following table lists the configurable parameters of the `kubedbcom-rabbitmq Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-rabbitmq-editor appscode/kubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-rabbitmq-editor appscode/kubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-rabbitmq-editor appscode/kubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-rabbitmq-editor appscode/kubedbcom-rabbitmq-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-rabbitmq-editor/ui/edit-ui.yaml b/charts/kubedbcom-rabbitmq-editor/ui/edit-ui.yaml index d140ed0572..6bf52816d9 100644 --- a/charts/kubedbcom-rabbitmq-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-rabbitmq-editor/ui/edit-ui.yaml @@ -442,7 +442,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace diff --git a/charts/kubedbcom-redis-editor-options/Chart.yaml b/charts/kubedbcom-redis-editor-options/Chart.yaml index fed0d6860b..014e0e7c4e 100644 --- a/charts/kubedbcom-redis-editor-options/Chart.yaml +++ b/charts/kubedbcom-redis-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-redis-editor-options description: Redis Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-redis-editor-options/README.md b/charts/kubedbcom-redis-editor-options/README.md index 3e6b676639..edd6ec888e 100644 --- a/charts/kubedbcom-redis-editor-options/README.md +++ b/charts/kubedbcom-redis-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-redis-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-redis-editor-options appscode/kubedbcom-redis-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-redis-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-redis-editor-options appscode/kubedbcom-redis-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Redis Editor UI Options on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `kubedbcom-redis-editor-options`: ```bash -$ helm upgrade -i kubedbcom-redis-editor-options appscode/kubedbcom-redis-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-redis-editor-options appscode/kubedbcom-redis-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Redis Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -249,12 +249,12 @@ The following table lists the configurable parameters of the `kubedbcom-redis-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-redis-editor-options appscode/kubedbcom-redis-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-redis-editor-options appscode/kubedbcom-redis-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-redis-editor-options appscode/kubedbcom-redis-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-redis-editor-options appscode/kubedbcom-redis-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-redis-editor/Chart.yaml b/charts/kubedbcom-redis-editor/Chart.yaml index b0b3b3a9eb..b3415cb406 100644 --- a/charts/kubedbcom-redis-editor/Chart.yaml +++ b/charts/kubedbcom-redis-editor/Chart.yaml @@ -2,57 +2,22 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1","resource":"redises"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComRedisAutoscaler,catalogAppscodeComRedisBinding,certManagerIoIssuer_ca,coreKubestashComBackupBlueprint,coreKubestashComBackupConfiguration,coreKubestashComRestoreSession,gitopsKubedbComRedis,gitopsKubedbComRedisSentinel_sentinel,kubedbComRedis,kubedbComRedisSentinel_sentinel,monitoringCoreosComServiceMonitor,secret_auth,secret_config,secret_encryption_secret,secret_init_repo_cred,secret_repo_cred,stashAppscodeComBackupConfiguration,stashAppscodeComRepository_init_repo,stashAppscodeComRepository_repo,stashAppscodeComRestoreSession_init - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: RedisAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: RedisBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: core.kubestash.com - kind: BackupBlueprint - version: v1alpha1 - - group: core.kubestash.com - kind: BackupConfiguration - version: v1alpha1 - - group: core.kubestash.com - kind: RestoreSession - version: v1alpha1 - - group: gitops.kubedb.com - kind: Redis - version: v1alpha1 - - group: gitops.kubedb.com - kind: RedisSentinel - version: v1alpha1 - - group: kubedb.com - kind: Redis - version: v1 - - group: kubedb.com - kind: RedisSentinel - version: v1 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 - - group: stash.appscode.com - kind: BackupConfiguration - version: v1beta1 - - group: stash.appscode.com - kind: Repository - version: v1alpha1 - - group: stash.appscode.com - kind: RestoreSession - version: v1beta1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: RedisAutoscaler\n version: v1alpha1\n- group:\ + \ catalog.appscode.com\n kind: RedisBinding\n version: v1alpha1\n- group: cert-manager.io\n\ + \ kind: Issuer\n version: v1\n- group: core.kubestash.com\n kind: BackupBlueprint\n\ + \ version: v1alpha1\n- group: core.kubestash.com\n kind: BackupConfiguration\n\ + \ version: v1alpha1\n- group: core.kubestash.com\n kind: RestoreSession\n version:\ + \ v1alpha1\n- group: gitops.kubedb.com\n kind: Redis\n version: v1alpha1\n-\ + \ group: gitops.kubedb.com\n kind: RedisSentinel\n version: v1alpha1\n- group:\ + \ kubedb.com\n kind: Redis\n version: v1\n- group: kubedb.com\n kind: RedisSentinel\n\ + \ version: v1\n- group: monitoring.coreos.com\n kind: PrometheusRule\n version:\ + \ v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version: v1\n\ + - group: stash.appscode.com\n kind: BackupConfiguration\n version: v1beta1\n\ + - group: stash.appscode.com\n kind: Repository\n version: v1alpha1\n- group:\ + \ stash.appscode.com\n kind: RestoreSession\n version: v1beta1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Redis Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -64,4 +29,4 @@ maintainers: name: appscode name: kubedbcom-redis-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-redis-editor/README.md b/charts/kubedbcom-redis-editor/README.md index a223b47c06..46b1f844ee 100644 --- a/charts/kubedbcom-redis-editor/README.md +++ b/charts/kubedbcom-redis-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-redis-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-redis-editor appscode/kubedbcom-redis-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-redis-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-redis-editor appscode/kubedbcom-redis-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Redis Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `kubedbcom-redis-editor`: ```bash -$ helm upgrade -i kubedbcom-redis-editor appscode/kubedbcom-redis-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-redis-editor appscode/kubedbcom-redis-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Redis Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -184,12 +184,12 @@ The following table lists the configurable parameters of the `kubedbcom-redis-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-redis-editor appscode/kubedbcom-redis-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-redis-editor appscode/kubedbcom-redis-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-redis-editor appscode/kubedbcom-redis-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-redis-editor appscode/kubedbcom-redis-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-redis-editor/ui/create-ui.yaml b/charts/kubedbcom-redis-editor/ui/create-ui.yaml index 57b9ce39ea..7b334de32f 100644 --- a/charts/kubedbcom-redis-editor/ui/create-ui.yaml +++ b/charts/kubedbcom-redis-editor/ui/create-ui.yaml @@ -125,7 +125,7 @@ steps: - alias: reusable_alert chart: name: uibytebuildersdev-component-alert - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/form/properties/alert @@ -278,7 +278,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 functionCallbacks: getAliasOptions: $ref: functions#/getAliasOptions @@ -400,7 +400,7 @@ steps: - alias: repository_create_init chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -436,7 +436,7 @@ steps: - alias: runtime_settings_init chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -525,7 +525,7 @@ steps: - alias: repository_create_backup chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -611,7 +611,7 @@ steps: - alias: runtime_settings_backup chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -892,7 +892,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -912,7 +912,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -928,7 +928,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComRedis/properties/spec/properties/serviceTemplates diff --git a/charts/kubedbcom-redis-editor/ui/edit-ui.yaml b/charts/kubedbcom-redis-editor/ui/edit-ui.yaml index a5c97c58c8..076b8dc3e3 100644 --- a/charts/kubedbcom-redis-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-redis-editor/ui/edit-ui.yaml @@ -89,7 +89,7 @@ steps: - alias: reusable_alert chart: name: uibytebuildersdev-component-alert - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/form/properties/alert @@ -304,7 +304,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComRedis/properties/spec/properties/tls/properties/certificates @@ -425,7 +425,7 @@ steps: - alias: repository_create_init chart: name: uibytebuildersdev-component-repository-create - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -461,7 +461,7 @@ steps: - alias: runtime_settings_init chart: name: uibytebuildersdev-component-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -825,7 +825,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -846,7 +846,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -866,7 +866,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubedbComRedis/properties/spec/properties/serviceTemplates diff --git a/charts/kubedbcom-redissentinel-editor/Chart.yaml b/charts/kubedbcom-redissentinel-editor/Chart.yaml index 369317eb7d..f0fff23c4c 100644 --- a/charts/kubedbcom-redissentinel-editor/Chart.yaml +++ b/charts/kubedbcom-redissentinel-editor/Chart.yaml @@ -1,24 +1,13 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1","resource":"redissentinels"}' meta.x-helm.dev/resource-keys: certManagerIoIssuer_redis_ca,gitopsKubedbComRedisSentinel,kubedbComRedisSentinel,monitoringCoreosComServiceMonitor_redis,secret_auth - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: gitops.kubedb.com - kind: RedisSentinel - version: v1alpha1 - - group: kubedb.com - kind: RedisSentinel - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ cert-manager.io\n kind: Issuer\n version: v1\n- group: gitops.kubedb.com\n\ + \ kind: RedisSentinel\n version: v1alpha1\n- group: kubedb.com\n kind: RedisSentinel\n\ + \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ + \ v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisSentinel Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -30,4 +19,4 @@ maintainers: name: appscode name: kubedbcom-redissentinel-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-redissentinel-editor/README.md b/charts/kubedbcom-redissentinel-editor/README.md index 4d0221b8b5..3e747fd58d 100644 --- a/charts/kubedbcom-redissentinel-editor/README.md +++ b/charts/kubedbcom-redissentinel-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-redissentinel-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-redissentinel-editor appscode/kubedbcom-redissentinel-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-redissentinel-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-redissentinel-editor appscode/kubedbcom-redissentinel-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisSentinel Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `kubedbcom-redissentinel-editor`: ```bash -$ helm upgrade -i kubedbcom-redissentinel-editor appscode/kubedbcom-redissentinel-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-redissentinel-editor appscode/kubedbcom-redissentinel-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisSentinel Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -64,12 +64,12 @@ The following table lists the configurable parameters of the `kubedbcom-redissen Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-redissentinel-editor appscode/kubedbcom-redissentinel-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-redissentinel-editor appscode/kubedbcom-redissentinel-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-redissentinel-editor appscode/kubedbcom-redissentinel-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-redissentinel-editor appscode/kubedbcom-redissentinel-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-singlestore-editor-options/Chart.yaml b/charts/kubedbcom-singlestore-editor-options/Chart.yaml index c0767a8916..7d16bd61ad 100644 --- a/charts/kubedbcom-singlestore-editor-options/Chart.yaml +++ b/charts/kubedbcom-singlestore-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-singlestore-editor-options description: Singlestore Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-singlestore-editor-options/README.md b/charts/kubedbcom-singlestore-editor-options/README.md index ff3815dc41..d8bda8431f 100644 --- a/charts/kubedbcom-singlestore-editor-options/README.md +++ b/charts/kubedbcom-singlestore-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-singlestore-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-singlestore-editor-options appscode/kubedbcom-singlestore-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-singlestore-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-singlestore-editor-options appscode/kubedbcom-singlestore-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Singlestore Editor UI Options on a [Kubernetes](http://kube To install/upgrade the chart with the release name `kubedbcom-singlestore-editor-options`: ```bash -$ helm upgrade -i kubedbcom-singlestore-editor-options appscode/kubedbcom-singlestore-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-singlestore-editor-options appscode/kubedbcom-singlestore-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Singlestore Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -235,12 +235,12 @@ The following table lists the configurable parameters of the `kubedbcom-singlest Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-singlestore-editor-options appscode/kubedbcom-singlestore-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-singlestore-editor-options appscode/kubedbcom-singlestore-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-singlestore-editor-options appscode/kubedbcom-singlestore-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-singlestore-editor-options appscode/kubedbcom-singlestore-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-singlestore-editor/Chart.yaml b/charts/kubedbcom-singlestore-editor/Chart.yaml index 58c926b6c6..4f0d08da53 100644 --- a/charts/kubedbcom-singlestore-editor/Chart.yaml +++ b/charts/kubedbcom-singlestore-editor/Chart.yaml @@ -2,42 +2,19 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1alpha2","resource":"singlestores"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComSinglestoreAutoscaler,catalogAppscodeComSinglestoreBinding,certManagerIoIssuer_ca,coreKubestashComBackupBlueprint,coreKubestashComBackupConfiguration,coreKubestashComRestoreSession,gitopsKubedbComSinglestore,kubedbComSinglestore,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: SinglestoreAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: SinglestoreBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: core.kubestash.com - kind: BackupBlueprint - version: v1alpha1 - - group: core.kubestash.com - kind: BackupConfiguration - version: v1alpha1 - - group: core.kubestash.com - kind: RestoreSession - version: v1alpha1 - - group: gitops.kubedb.com - kind: Singlestore - version: v1alpha1 - - group: kubedb.com - kind: Singlestore - version: v1alpha2 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: SinglestoreAutoscaler\n version: v1alpha1\n\ + - group: catalog.appscode.com\n kind: SinglestoreBinding\n version: v1alpha1\n\ + - group: cert-manager.io\n kind: Issuer\n version: v1\n- group: core.kubestash.com\n\ + \ kind: BackupBlueprint\n version: v1alpha1\n- group: core.kubestash.com\n \ + \ kind: BackupConfiguration\n version: v1alpha1\n- group: core.kubestash.com\n\ + \ kind: RestoreSession\n version: v1alpha1\n- group: gitops.kubedb.com\n kind:\ + \ Singlestore\n version: v1alpha1\n- group: kubedb.com\n kind: Singlestore\n\ + \ version: v1alpha2\n- group: monitoring.coreos.com\n kind: PrometheusRule\n\ + \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ + \ v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Singlestore Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -49,4 +26,4 @@ maintainers: name: appscode name: kubedbcom-singlestore-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-singlestore-editor/README.md b/charts/kubedbcom-singlestore-editor/README.md index f99aadf483..5c713ef6e9 100644 --- a/charts/kubedbcom-singlestore-editor/README.md +++ b/charts/kubedbcom-singlestore-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-singlestore-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-singlestore-editor appscode/kubedbcom-singlestore-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-singlestore-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-singlestore-editor appscode/kubedbcom-singlestore-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Singlestore Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `kubedbcom-singlestore-editor`: ```bash -$ helm upgrade -i kubedbcom-singlestore-editor appscode/kubedbcom-singlestore-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-singlestore-editor appscode/kubedbcom-singlestore-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Singlestore Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -156,12 +156,12 @@ The following table lists the configurable parameters of the `kubedbcom-singlest Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-singlestore-editor appscode/kubedbcom-singlestore-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-singlestore-editor appscode/kubedbcom-singlestore-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-singlestore-editor appscode/kubedbcom-singlestore-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-singlestore-editor appscode/kubedbcom-singlestore-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-singlestore-editor/ui/edit-ui.yaml b/charts/kubedbcom-singlestore-editor/ui/edit-ui.yaml index 9688433ee2..25a20abfec 100644 --- a/charts/kubedbcom-singlestore-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-singlestore-editor/ui/edit-ui.yaml @@ -768,7 +768,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace diff --git a/charts/kubedbcom-solr-editor-options/Chart.yaml b/charts/kubedbcom-solr-editor-options/Chart.yaml index ce6b039306..7227ae6347 100644 --- a/charts/kubedbcom-solr-editor-options/Chart.yaml +++ b/charts/kubedbcom-solr-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-solr-editor-options description: Solr Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-solr-editor-options/README.md b/charts/kubedbcom-solr-editor-options/README.md index 5c9fb10b47..abf6b82295 100644 --- a/charts/kubedbcom-solr-editor-options/README.md +++ b/charts/kubedbcom-solr-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-solr-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-solr-editor-options appscode/kubedbcom-solr-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-solr-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-solr-editor-options appscode/kubedbcom-solr-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Solr Editor UI Options on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `kubedbcom-solr-editor-options`: ```bash -$ helm upgrade -i kubedbcom-solr-editor-options appscode/kubedbcom-solr-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-solr-editor-options appscode/kubedbcom-solr-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Solr Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -213,12 +213,12 @@ The following table lists the configurable parameters of the `kubedbcom-solr-edi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-solr-editor-options appscode/kubedbcom-solr-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-solr-editor-options appscode/kubedbcom-solr-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-solr-editor-options appscode/kubedbcom-solr-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-solr-editor-options appscode/kubedbcom-solr-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-solr-editor/Chart.yaml b/charts/kubedbcom-solr-editor/Chart.yaml index 94f9fe3b3b..7409f0a64f 100644 --- a/charts/kubedbcom-solr-editor/Chart.yaml +++ b/charts/kubedbcom-solr-editor/Chart.yaml @@ -2,33 +2,15 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1alpha2","resource":"solrs"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComSolrAutoscaler,catalogAppscodeComSolrBinding,certManagerIoIssuer_ca,gitopsKubedbComSolr,kubedbComSolr,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: SolrAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: SolrBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: gitops.kubedb.com - kind: Solr - version: v1alpha1 - - group: kubedb.com - kind: Solr - version: v1alpha2 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: SolrAutoscaler\n version: v1alpha1\n- group:\ + \ catalog.appscode.com\n kind: SolrBinding\n version: v1alpha1\n- group: cert-manager.io\n\ + \ kind: Issuer\n version: v1\n- group: gitops.kubedb.com\n kind: Solr\n version:\ + \ v1alpha1\n- group: kubedb.com\n kind: Solr\n version: v1alpha2\n- group: monitoring.coreos.com\n\ + \ kind: PrometheusRule\n version: v1\n- group: monitoring.coreos.com\n kind:\ + \ ServiceMonitor\n version: v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Solr Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -40,4 +22,4 @@ maintainers: name: appscode name: kubedbcom-solr-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-solr-editor/README.md b/charts/kubedbcom-solr-editor/README.md index e306288c13..f5ffb5e692 100644 --- a/charts/kubedbcom-solr-editor/README.md +++ b/charts/kubedbcom-solr-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-solr-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-solr-editor appscode/kubedbcom-solr-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-solr-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-solr-editor appscode/kubedbcom-solr-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Solr Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `kubedbcom-solr-editor`: ```bash -$ helm upgrade -i kubedbcom-solr-editor appscode/kubedbcom-solr-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-solr-editor appscode/kubedbcom-solr-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Solr Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -124,12 +124,12 @@ The following table lists the configurable parameters of the `kubedbcom-solr-edi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-solr-editor appscode/kubedbcom-solr-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-solr-editor appscode/kubedbcom-solr-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-solr-editor appscode/kubedbcom-solr-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-solr-editor appscode/kubedbcom-solr-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-solr-editor/ui/edit-ui.yaml b/charts/kubedbcom-solr-editor/ui/edit-ui.yaml index 482df9f248..8c845d1308 100644 --- a/charts/kubedbcom-solr-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-solr-editor/ui/edit-ui.yaml @@ -1142,7 +1142,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace diff --git a/charts/kubedbcom-zookeeper-editor-options/Chart.yaml b/charts/kubedbcom-zookeeper-editor-options/Chart.yaml index d3a0b6c07a..121213c0c0 100644 --- a/charts/kubedbcom-zookeeper-editor-options/Chart.yaml +++ b/charts/kubedbcom-zookeeper-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubedbcom-zookeeper-editor-options description: ZooKeeper Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubedbcom-zookeeper-editor-options/README.md b/charts/kubedbcom-zookeeper-editor-options/README.md index 278d94a137..a69451b99d 100644 --- a/charts/kubedbcom-zookeeper-editor-options/README.md +++ b/charts/kubedbcom-zookeeper-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-zookeeper-editor-options --version=v0.23.0 -$ helm upgrade -i kubedbcom-zookeeper-editor-options appscode/kubedbcom-zookeeper-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-zookeeper-editor-options --version=v0.24.0 +$ helm upgrade -i kubedbcom-zookeeper-editor-options appscode/kubedbcom-zookeeper-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ZooKeeper Editor UI Options on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `kubedbcom-zookeeper-editor-options`: ```bash -$ helm upgrade -i kubedbcom-zookeeper-editor-options appscode/kubedbcom-zookeeper-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-zookeeper-editor-options appscode/kubedbcom-zookeeper-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a ZooKeeper Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -201,12 +201,12 @@ The following table lists the configurable parameters of the `kubedbcom-zookeepe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-zookeeper-editor-options appscode/kubedbcom-zookeeper-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubedb.com +$ helm upgrade -i kubedbcom-zookeeper-editor-options appscode/kubedbcom-zookeeper-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubedb.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-zookeeper-editor-options appscode/kubedbcom-zookeeper-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-zookeeper-editor-options appscode/kubedbcom-zookeeper-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-zookeeper-editor/Chart.yaml b/charts/kubedbcom-zookeeper-editor/Chart.yaml index fbee872807..a450c2fe3f 100644 --- a/charts/kubedbcom-zookeeper-editor/Chart.yaml +++ b/charts/kubedbcom-zookeeper-editor/Chart.yaml @@ -2,39 +2,18 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubedb.com","version":"v1alpha2","resource":"zookeepers"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: autoscalingKubedbComZooKeeperAutoscaler,catalogAppscodeComZooKeeperBinding,certManagerIoIssuer_ca,coreKubestashComBackupBlueprint,coreKubestashComBackupConfiguration,coreKubestashComRestoreSession,kubedbComZooKeeper,monitoringCoreosComServiceMonitor,secret_auth,secret_config - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: autoscaling.kubedb.com - kind: ZooKeeperAutoscaler - version: v1alpha1 - - group: catalog.appscode.com - kind: ZooKeeperBinding - version: v1alpha1 - - group: cert-manager.io - kind: Issuer - version: v1 - - group: core.kubestash.com - kind: BackupBlueprint - version: v1alpha1 - - group: core.kubestash.com - kind: BackupConfiguration - version: v1alpha1 - - group: core.kubestash.com - kind: RestoreSession - version: v1alpha1 - - group: kubedb.com - kind: ZooKeeper - version: v1alpha2 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ autoscaling.kubedb.com\n kind: ZooKeeperAutoscaler\n version: v1alpha1\n-\ + \ group: catalog.appscode.com\n kind: ZooKeeperBinding\n version: v1alpha1\n\ + - group: cert-manager.io\n kind: Issuer\n version: v1\n- group: core.kubestash.com\n\ + \ kind: BackupBlueprint\n version: v1alpha1\n- group: core.kubestash.com\n \ + \ kind: BackupConfiguration\n version: v1alpha1\n- group: core.kubestash.com\n\ + \ kind: RestoreSession\n version: v1alpha1\n- group: kubedb.com\n kind: ZooKeeper\n\ + \ version: v1alpha2\n- group: monitoring.coreos.com\n kind: PrometheusRule\n\ + \ version: v1\n- group: monitoring.coreos.com\n kind: ServiceMonitor\n version:\ + \ v1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ZooKeeper Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -46,4 +25,4 @@ maintainers: name: appscode name: kubedbcom-zookeeper-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubedbcom-zookeeper-editor/README.md b/charts/kubedbcom-zookeeper-editor/README.md index 281201f9be..66bc51dfac 100644 --- a/charts/kubedbcom-zookeeper-editor/README.md +++ b/charts/kubedbcom-zookeeper-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubedbcom-zookeeper-editor --version=v0.23.0 -$ helm upgrade -i kubedbcom-zookeeper-editor appscode/kubedbcom-zookeeper-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubedbcom-zookeeper-editor --version=v0.24.0 +$ helm upgrade -i kubedbcom-zookeeper-editor appscode/kubedbcom-zookeeper-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ZooKeeper Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `kubedbcom-zookeeper-editor`: ```bash -$ helm upgrade -i kubedbcom-zookeeper-editor appscode/kubedbcom-zookeeper-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubedbcom-zookeeper-editor appscode/kubedbcom-zookeeper-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ZooKeeper Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -141,12 +141,12 @@ The following table lists the configurable parameters of the `kubedbcom-zookeepe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubedbcom-zookeeper-editor appscode/kubedbcom-zookeeper-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubedbcom-zookeeper-editor appscode/kubedbcom-zookeeper-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubedbcom-zookeeper-editor appscode/kubedbcom-zookeeper-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubedbcom-zookeeper-editor appscode/kubedbcom-zookeeper-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubedbcom-zookeeper-editor/ui/edit-ui.yaml b/charts/kubedbcom-zookeeper-editor/ui/edit-ui.yaml index 4b917116be..ee9ac8b5ac 100644 --- a/charts/kubedbcom-zookeeper-editor/ui/edit-ui.yaml +++ b/charts/kubedbcom-zookeeper-editor/ui/edit-ui.yaml @@ -559,7 +559,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace diff --git a/charts/kubevaultcom-vaultserver-editor-options/Chart.yaml b/charts/kubevaultcom-vaultserver-editor-options/Chart.yaml index 2b03868360..9cfeefa776 100644 --- a/charts/kubevaultcom-vaultserver-editor-options/Chart.yaml +++ b/charts/kubevaultcom-vaultserver-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: kubevaultcom-vaultserver-editor-options description: VaultServer Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/kubevaultcom-vaultserver-editor-options/README.md b/charts/kubevaultcom-vaultserver-editor-options/README.md index 1eec24de80..d47cdd27f0 100644 --- a/charts/kubevaultcom-vaultserver-editor-options/README.md +++ b/charts/kubevaultcom-vaultserver-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubevaultcom-vaultserver-editor-options --version=v0.23.0 -$ helm upgrade -i kubevaultcom-vaultserver-editor-options appscode/kubevaultcom-vaultserver-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubevaultcom-vaultserver-editor-options --version=v0.24.0 +$ helm upgrade -i kubevaultcom-vaultserver-editor-options appscode/kubevaultcom-vaultserver-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VaultServer Editor UI Options on a [Kubernetes](http://kube To install/upgrade the chart with the release name `kubevaultcom-vaultserver-editor-options`: ```bash -$ helm upgrade -i kubevaultcom-vaultserver-editor-options appscode/kubevaultcom-vaultserver-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i kubevaultcom-vaultserver-editor-options appscode/kubevaultcom-vaultserver-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a VaultServer Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -260,12 +260,12 @@ The following table lists the configurable parameters of the `kubevaultcom-vault Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubevaultcom-vaultserver-editor-options appscode/kubevaultcom-vaultserver-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=kubevault.com +$ helm upgrade -i kubevaultcom-vaultserver-editor-options appscode/kubevaultcom-vaultserver-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=kubevault.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubevaultcom-vaultserver-editor-options appscode/kubevaultcom-vaultserver-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubevaultcom-vaultserver-editor-options appscode/kubevaultcom-vaultserver-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubevaultcom-vaultserver-editor-options/ui/create-ui.yaml b/charts/kubevaultcom-vaultserver-editor-options/ui/create-ui.yaml index d80f594646..0d1b152dc1 100644 --- a/charts/kubevaultcom-vaultserver-editor-options/ui/create-ui.yaml +++ b/charts/kubevaultcom-vaultserver-editor-options/ui/create-ui.yaml @@ -590,7 +590,7 @@ steps: - alias: reusable-backup-option chart: name: uibytebuildersdev-component-backup-option - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/spec/properties/backup diff --git a/charts/kubevaultcom-vaultserver-editor/Chart.yaml b/charts/kubevaultcom-vaultserver-editor/Chart.yaml index d7155be86e..6011ee6d06 100644 --- a/charts/kubevaultcom-vaultserver-editor/Chart.yaml +++ b/charts/kubevaultcom-vaultserver-editor/Chart.yaml @@ -2,27 +2,14 @@ annotations: meta.x-helm.dev/editor: '{"group":"kubevault.com","version":"v1alpha1","resource":"vaultservers"}' meta.x-helm.dev/form-keys: monitoringCoreosComPrometheusRule meta.x-helm.dev/resource-keys: kubevaultComVaultServer,monitoringCoreosComServiceMonitor,secret_backend_creds,secret_backend_tls,secret_config,secret_repo_cred,secret_unsealer_creds,stashAppscodeComBackupConfiguration,stashAppscodeComRepository_repo - meta.x-helm.dev/resources: | - - group: "" - kind: Secret - version: v1 - - group: kubevault.com - kind: VaultServer - version: v1alpha2 - - group: monitoring.coreos.com - kind: PrometheusRule - version: v1 - - group: monitoring.coreos.com - kind: ServiceMonitor - version: v1 - - group: stash.appscode.com - kind: BackupConfiguration - version: v1beta1 - - group: stash.appscode.com - kind: Repository - version: v1alpha1 + meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ + \ kubevault.com\n kind: VaultServer\n version: v1alpha2\n- group: monitoring.coreos.com\n\ + \ kind: PrometheusRule\n version: v1\n- group: monitoring.coreos.com\n kind:\ + \ ServiceMonitor\n version: v1\n- group: stash.appscode.com\n kind: BackupConfiguration\n\ + \ version: v1beta1\n- group: stash.appscode.com\n kind: Repository\n version:\ + \ v1alpha1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VaultServer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -34,4 +21,4 @@ maintainers: name: appscode name: kubevaultcom-vaultserver-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kubevaultcom-vaultserver-editor/README.md b/charts/kubevaultcom-vaultserver-editor/README.md index 80d9837902..889e8b3a31 100644 --- a/charts/kubevaultcom-vaultserver-editor/README.md +++ b/charts/kubevaultcom-vaultserver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kubevaultcom-vaultserver-editor --version=v0.23.0 -$ helm upgrade -i kubevaultcom-vaultserver-editor appscode/kubevaultcom-vaultserver-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kubevaultcom-vaultserver-editor --version=v0.24.0 +$ helm upgrade -i kubevaultcom-vaultserver-editor appscode/kubevaultcom-vaultserver-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VaultServer Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `kubevaultcom-vaultserver-editor`: ```bash -$ helm upgrade -i kubevaultcom-vaultserver-editor appscode/kubevaultcom-vaultserver-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kubevaultcom-vaultserver-editor appscode/kubevaultcom-vaultserver-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VaultServer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -154,12 +154,12 @@ The following table lists the configurable parameters of the `kubevaultcom-vault Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kubevaultcom-vaultserver-editor appscode/kubevaultcom-vaultserver-editor -n default --create-namespace --version=v0.23.0 --set form.alert.enabled=warning +$ helm upgrade -i kubevaultcom-vaultserver-editor appscode/kubevaultcom-vaultserver-editor -n default --create-namespace --version=v0.24.0 --set form.alert.enabled=warning ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kubevaultcom-vaultserver-editor appscode/kubevaultcom-vaultserver-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kubevaultcom-vaultserver-editor appscode/kubevaultcom-vaultserver-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/kubevaultcom-vaultserver-editor/ui/create-ui.yaml b/charts/kubevaultcom-vaultserver-editor/ui/create-ui.yaml index a25678c8ec..adb8aab357 100755 --- a/charts/kubevaultcom-vaultserver-editor/ui/create-ui.yaml +++ b/charts/kubevaultcom-vaultserver-editor/ui/create-ui.yaml @@ -625,7 +625,7 @@ steps: - alias: reusable_raft_selector chart: name: uibytebuildersdev-component-selector - version: v0.23.0 + version: v0.24.0 customClass: mb-10 hideForm: true label: @@ -808,7 +808,7 @@ steps: - alias: reusable_config_map_items chart: name: uibytebuildersdev-component-data-sources-items - version: v0.23.0 + version: v0.24.0 customClass: mb-10 moduleResolver: fetchJsons schema: @@ -838,7 +838,7 @@ steps: - alias: reusable_secret_items chart: name: uibytebuildersdev-component-data-sources-items - version: v0.23.0 + version: v0.24.0 customClass: mb-10 moduleResolver: fetchJsons schema: @@ -1288,7 +1288,7 @@ steps: - alias: vaultserver-backupconfiguration chart: name: uibytebuildersdev-component-backupconfiguration - version: v0.23.0 + version: v0.24.0 dataContext: name: $ref: schema#/properties/metadata/properties/release/properties/name @@ -1352,7 +1352,7 @@ steps: - alias: reusable_match_expressions chart: name: uibytebuildersdev-component-match-expressions - version: v0.23.0 + version: v0.24.0 customClass: mb-10 moduleResolver: fetchJsons schema: @@ -1476,7 +1476,7 @@ steps: - alias: reusable_jwt_config chart: name: uibytebuildersdev-component-jwtoidc-config - version: v0.23.0 + version: v0.24.0 customClass: mb-10 hideForm: true if: isAuthMethodTypeEqualTo|jwt @@ -1490,7 +1490,7 @@ steps: - alias: reusable_oidc_config chart: name: uibytebuildersdev-component-jwtoidc-config - version: v0.23.0 + version: v0.24.0 customClass: mb-10 hideForm: true if: isAuthMethodTypeEqualTo|oidc @@ -1626,7 +1626,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 functionCallbacks: getAliasOptions: $ref: functions#/getAliasOptions @@ -1644,7 +1644,7 @@ steps: - alias: reusable_health_checker chart: name: uibytebuildersdev-component-health-checker - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubevaultComVaultServer/properties/spec/properties/healthChecker @@ -1780,7 +1780,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -1800,7 +1800,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -1816,7 +1816,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubevaultComVaultServer/properties/spec/properties/serviceTemplates diff --git a/charts/kubevaultcom-vaultserver-editor/ui/edit-ui.yaml b/charts/kubevaultcom-vaultserver-editor/ui/edit-ui.yaml index ce360e9873..7b02ce22c0 100755 --- a/charts/kubevaultcom-vaultserver-editor/ui/edit-ui.yaml +++ b/charts/kubevaultcom-vaultserver-editor/ui/edit-ui.yaml @@ -478,7 +478,7 @@ steps: - alias: reusable_raft_selector chart: name: uibytebuildersdev-component-selector - version: v0.23.0 + version: v0.24.0 customClass: mb-10 hideForm: true label: @@ -665,7 +665,7 @@ steps: - alias: reusable_config_map_items chart: name: uibytebuildersdev-component-data-sources-items - version: v0.23.0 + version: v0.24.0 customClass: mb-10 moduleResolver: fetchJsons schema: @@ -695,7 +695,7 @@ steps: - alias: reusable_secret_items chart: name: uibytebuildersdev-component-data-sources-items - version: v0.23.0 + version: v0.24.0 customClass: mb-10 moduleResolver: fetchJsons schema: @@ -1052,7 +1052,7 @@ steps: - alias: vaultserver-backupconfiguration chart: name: uibytebuildersdev-component-backupconfiguration - version: v0.23.0 + version: v0.24.0 dataContext: name: $ref: schema#/properties/metadata/properties/release/properties/name @@ -1119,7 +1119,7 @@ steps: - alias: reusable_match_expressions chart: name: uibytebuildersdev-component-match-expressions - version: v0.23.0 + version: v0.24.0 customClass: mb-10 moduleResolver: fetchJsons schema: @@ -1243,7 +1243,7 @@ steps: - alias: reusable_jwt_config chart: name: uibytebuildersdev-component-jwtoidc-config - version: v0.23.0 + version: v0.24.0 customClass: mb-10 hideForm: true if: isAuthMethodTypeEqualTo|jwt @@ -1257,7 +1257,7 @@ steps: - alias: reusable_oidc_config chart: name: uibytebuildersdev-component-jwtoidc-config - version: v0.23.0 + version: v0.24.0 customClass: mb-10 hideForm: true if: isAuthMethodTypeEqualTo|oidc @@ -1423,7 +1423,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 functionCallbacks: getAliasOptions: $ref: functions#/getAliasOptions @@ -1441,7 +1441,7 @@ steps: - alias: reusable_health_checker chart: name: uibytebuildersdev-component-health-checker - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubevaultComVaultServer/properties/spec/properties/healthChecker @@ -1578,7 +1578,7 @@ steps: - alias: reusable_env chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -1598,7 +1598,7 @@ steps: - alias: pod_template_standalone chart: name: uibytebuildersdev-component-pod-template - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace @@ -1617,7 +1617,7 @@ steps: - alias: reusable_service_templates chart: name: uibytebuildersdev-component-service-templates - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/resources/properties/kubevaultComVaultServer/properties/spec/properties/serviceTemplates diff --git a/charts/kustomizetoolkitfluxcdio-kustomization-editor/Chart.yaml b/charts/kustomizetoolkitfluxcdio-kustomization-editor/Chart.yaml index 75f7c391ee..99c6656d45 100644 --- a/charts/kustomizetoolkitfluxcdio-kustomization-editor/Chart.yaml +++ b/charts/kustomizetoolkitfluxcdio-kustomization-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"kustomize.toolkit.fluxcd.io","version":"v1","resource":"kustomizations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Kustomization Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: kustomizetoolkitfluxcdio-kustomization-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/kustomizetoolkitfluxcdio-kustomization-editor/README.md b/charts/kustomizetoolkitfluxcdio-kustomization-editor/README.md index fa65922af5..89266d760b 100644 --- a/charts/kustomizetoolkitfluxcdio-kustomization-editor/README.md +++ b/charts/kustomizetoolkitfluxcdio-kustomization-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/kustomizetoolkitfluxcdio-kustomization-editor --version=v0.23.0 -$ helm upgrade -i kustomizetoolkitfluxcdio-kustomization-editor appscode/kustomizetoolkitfluxcdio-kustomization-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/kustomizetoolkitfluxcdio-kustomization-editor --version=v0.24.0 +$ helm upgrade -i kustomizetoolkitfluxcdio-kustomization-editor appscode/kustomizetoolkitfluxcdio-kustomization-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Kustomization Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `kustomizetoolkitfluxcdio-kustomization-editor`: ```bash -$ helm upgrade -i kustomizetoolkitfluxcdio-kustomization-editor appscode/kustomizetoolkitfluxcdio-kustomization-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i kustomizetoolkitfluxcdio-kustomization-editor appscode/kustomizetoolkitfluxcdio-kustomization-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Kustomization Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `kustomizetoolkitfl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i kustomizetoolkitfluxcdio-kustomization-editor appscode/kustomizetoolkitfluxcdio-kustomization-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=kustomize.toolkit.fluxcd.io/v1 +$ helm upgrade -i kustomizetoolkitfluxcdio-kustomization-editor appscode/kustomizetoolkitfluxcdio-kustomization-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=kustomize.toolkit.fluxcd.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i kustomizetoolkitfluxcdio-kustomization-editor appscode/kustomizetoolkitfluxcdio-kustomization-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i kustomizetoolkitfluxcdio-kustomization-editor appscode/kustomizetoolkitfluxcdio-kustomization-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/managementk8sappscodecom-projectquota-editor/Chart.yaml b/charts/managementk8sappscodecom-projectquota-editor/Chart.yaml index d2acb5ae1d..9e3bb1329a 100644 --- a/charts/managementk8sappscodecom-projectquota-editor/Chart.yaml +++ b/charts/managementk8sappscodecom-projectquota-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"management.k8s.appscode.com","version":"v1alpha1","resource":"projectquotas"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProjectQuota Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: managementk8sappscodecom-projectquota-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/managementk8sappscodecom-projectquota-editor/README.md b/charts/managementk8sappscodecom-projectquota-editor/README.md index 666c960c97..d71e2cdc70 100644 --- a/charts/managementk8sappscodecom-projectquota-editor/README.md +++ b/charts/managementk8sappscodecom-projectquota-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/managementk8sappscodecom-projectquota-editor --version=v0.23.0 -$ helm upgrade -i managementk8sappscodecom-projectquota-editor appscode/managementk8sappscodecom-projectquota-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/managementk8sappscodecom-projectquota-editor --version=v0.24.0 +$ helm upgrade -i managementk8sappscodecom-projectquota-editor appscode/managementk8sappscodecom-projectquota-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProjectQuota Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `managementk8sappscodecom-projectquota-editor`: ```bash -$ helm upgrade -i managementk8sappscodecom-projectquota-editor appscode/managementk8sappscodecom-projectquota-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i managementk8sappscodecom-projectquota-editor appscode/managementk8sappscodecom-projectquota-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProjectQuota Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `managementk8sappsc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i managementk8sappscodecom-projectquota-editor appscode/managementk8sappscodecom-projectquota-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=management.k8s.appscode.com/v1alpha1 +$ helm upgrade -i managementk8sappscodecom-projectquota-editor appscode/managementk8sappscodecom-projectquota-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=management.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i managementk8sappscodecom-projectquota-editor appscode/managementk8sappscodecom-projectquota-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i managementk8sappscodecom-projectquota-editor appscode/managementk8sappscodecom-projectquota-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/matchgatekeepersh-dummycrd-editor/Chart.yaml b/charts/matchgatekeepersh-dummycrd-editor/Chart.yaml index ff471fbb01..f3a75ed39f 100644 --- a/charts/matchgatekeepersh-dummycrd-editor/Chart.yaml +++ b/charts/matchgatekeepersh-dummycrd-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"match.gatekeeper.sh","version":"match","resource":"matchcrd"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: DummyCRD Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: matchgatekeepersh-dummycrd-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/matchgatekeepersh-dummycrd-editor/README.md b/charts/matchgatekeepersh-dummycrd-editor/README.md index 3ea4e6290e..59145d879d 100644 --- a/charts/matchgatekeepersh-dummycrd-editor/README.md +++ b/charts/matchgatekeepersh-dummycrd-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/matchgatekeepersh-dummycrd-editor --version=v0.23.0 -$ helm upgrade -i matchgatekeepersh-dummycrd-editor appscode/matchgatekeepersh-dummycrd-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/matchgatekeepersh-dummycrd-editor --version=v0.24.0 +$ helm upgrade -i matchgatekeepersh-dummycrd-editor appscode/matchgatekeepersh-dummycrd-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DummyCRD Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `matchgatekeepersh-dummycrd-editor`: ```bash -$ helm upgrade -i matchgatekeepersh-dummycrd-editor appscode/matchgatekeepersh-dummycrd-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i matchgatekeepersh-dummycrd-editor appscode/matchgatekeepersh-dummycrd-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a DummyCRD Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `matchgatekeepersh- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i matchgatekeepersh-dummycrd-editor appscode/matchgatekeepersh-dummycrd-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=match.gatekeeper.sh/match +$ helm upgrade -i matchgatekeepersh-dummycrd-editor appscode/matchgatekeepersh-dummycrd-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=match.gatekeeper.sh/match ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i matchgatekeepersh-dummycrd-editor appscode/matchgatekeepersh-dummycrd-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i matchgatekeepersh-dummycrd-editor appscode/matchgatekeepersh-dummycrd-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/memorydbawskubedbcom-acl-editor/Chart.yaml b/charts/memorydbawskubedbcom-acl-editor/Chart.yaml index efac887f84..b174269f13 100644 --- a/charts/memorydbawskubedbcom-acl-editor/Chart.yaml +++ b/charts/memorydbawskubedbcom-acl-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"memorydb.aws.kubedb.com","version":"v1alpha1","resource":"acls"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ACL Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: memorydbawskubedbcom-acl-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/memorydbawskubedbcom-acl-editor/README.md b/charts/memorydbawskubedbcom-acl-editor/README.md index 31b0b5bd32..434918e639 100644 --- a/charts/memorydbawskubedbcom-acl-editor/README.md +++ b/charts/memorydbawskubedbcom-acl-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/memorydbawskubedbcom-acl-editor --version=v0.23.0 -$ helm upgrade -i memorydbawskubedbcom-acl-editor appscode/memorydbawskubedbcom-acl-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/memorydbawskubedbcom-acl-editor --version=v0.24.0 +$ helm upgrade -i memorydbawskubedbcom-acl-editor appscode/memorydbawskubedbcom-acl-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ACL Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `memorydbawskubedbcom-acl-editor`: ```bash -$ helm upgrade -i memorydbawskubedbcom-acl-editor appscode/memorydbawskubedbcom-acl-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i memorydbawskubedbcom-acl-editor appscode/memorydbawskubedbcom-acl-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ACL Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `memorydbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-acl-editor appscode/memorydbawskubedbcom-acl-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i memorydbawskubedbcom-acl-editor appscode/memorydbawskubedbcom-acl-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-acl-editor appscode/memorydbawskubedbcom-acl-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i memorydbawskubedbcom-acl-editor appscode/memorydbawskubedbcom-acl-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/memorydbawskubedbcom-cluster-editor/Chart.yaml b/charts/memorydbawskubedbcom-cluster-editor/Chart.yaml index 1c2cd7001d..6f9c317531 100644 --- a/charts/memorydbawskubedbcom-cluster-editor/Chart.yaml +++ b/charts/memorydbawskubedbcom-cluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"memorydb.aws.kubedb.com","version":"v1alpha1","resource":"clusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Cluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: memorydbawskubedbcom-cluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/memorydbawskubedbcom-cluster-editor/README.md b/charts/memorydbawskubedbcom-cluster-editor/README.md index ffd8903151..4cc32212d6 100644 --- a/charts/memorydbawskubedbcom-cluster-editor/README.md +++ b/charts/memorydbawskubedbcom-cluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/memorydbawskubedbcom-cluster-editor --version=v0.23.0 -$ helm upgrade -i memorydbawskubedbcom-cluster-editor appscode/memorydbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/memorydbawskubedbcom-cluster-editor --version=v0.24.0 +$ helm upgrade -i memorydbawskubedbcom-cluster-editor appscode/memorydbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cluster Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `memorydbawskubedbcom-cluster-editor`: ```bash -$ helm upgrade -i memorydbawskubedbcom-cluster-editor appscode/memorydbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i memorydbawskubedbcom-cluster-editor appscode/memorydbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Cluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `memorydbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-cluster-editor appscode/memorydbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i memorydbawskubedbcom-cluster-editor appscode/memorydbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-cluster-editor appscode/memorydbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i memorydbawskubedbcom-cluster-editor appscode/memorydbawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/memorydbawskubedbcom-parametergroup-editor/Chart.yaml b/charts/memorydbawskubedbcom-parametergroup-editor/Chart.yaml index d68dd803e0..75ff6b7450 100644 --- a/charts/memorydbawskubedbcom-parametergroup-editor/Chart.yaml +++ b/charts/memorydbawskubedbcom-parametergroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"memorydb.aws.kubedb.com","version":"v1alpha1","resource":"parametergroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ParameterGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: memorydbawskubedbcom-parametergroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/memorydbawskubedbcom-parametergroup-editor/README.md b/charts/memorydbawskubedbcom-parametergroup-editor/README.md index d94b31e1d1..c09537ef68 100644 --- a/charts/memorydbawskubedbcom-parametergroup-editor/README.md +++ b/charts/memorydbawskubedbcom-parametergroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/memorydbawskubedbcom-parametergroup-editor --version=v0.23.0 -$ helm upgrade -i memorydbawskubedbcom-parametergroup-editor appscode/memorydbawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/memorydbawskubedbcom-parametergroup-editor --version=v0.24.0 +$ helm upgrade -i memorydbawskubedbcom-parametergroup-editor appscode/memorydbawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ParameterGroup Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `memorydbawskubedbcom-parametergroup-editor`: ```bash -$ helm upgrade -i memorydbawskubedbcom-parametergroup-editor appscode/memorydbawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i memorydbawskubedbcom-parametergroup-editor appscode/memorydbawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ParameterGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `memorydbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-parametergroup-editor appscode/memorydbawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i memorydbawskubedbcom-parametergroup-editor appscode/memorydbawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-parametergroup-editor appscode/memorydbawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i memorydbawskubedbcom-parametergroup-editor appscode/memorydbawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/memorydbawskubedbcom-snapshot-editor/Chart.yaml b/charts/memorydbawskubedbcom-snapshot-editor/Chart.yaml index 39ee4794ca..6eca5a6d44 100644 --- a/charts/memorydbawskubedbcom-snapshot-editor/Chart.yaml +++ b/charts/memorydbawskubedbcom-snapshot-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"memorydb.aws.kubedb.com","version":"v1alpha1","resource":"snapshots"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Snapshot Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: memorydbawskubedbcom-snapshot-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/memorydbawskubedbcom-snapshot-editor/README.md b/charts/memorydbawskubedbcom-snapshot-editor/README.md index 4abc45106a..6a6bff181b 100644 --- a/charts/memorydbawskubedbcom-snapshot-editor/README.md +++ b/charts/memorydbawskubedbcom-snapshot-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/memorydbawskubedbcom-snapshot-editor --version=v0.23.0 -$ helm upgrade -i memorydbawskubedbcom-snapshot-editor appscode/memorydbawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/memorydbawskubedbcom-snapshot-editor --version=v0.24.0 +$ helm upgrade -i memorydbawskubedbcom-snapshot-editor appscode/memorydbawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Snapshot Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `memorydbawskubedbcom-snapshot-editor`: ```bash -$ helm upgrade -i memorydbawskubedbcom-snapshot-editor appscode/memorydbawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i memorydbawskubedbcom-snapshot-editor appscode/memorydbawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Snapshot Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `memorydbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-snapshot-editor appscode/memorydbawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i memorydbawskubedbcom-snapshot-editor appscode/memorydbawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-snapshot-editor appscode/memorydbawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i memorydbawskubedbcom-snapshot-editor appscode/memorydbawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/memorydbawskubedbcom-subnetgroup-editor/Chart.yaml b/charts/memorydbawskubedbcom-subnetgroup-editor/Chart.yaml index 35287b0f8d..b79f2e0987 100644 --- a/charts/memorydbawskubedbcom-subnetgroup-editor/Chart.yaml +++ b/charts/memorydbawskubedbcom-subnetgroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"memorydb.aws.kubedb.com","version":"v1alpha1","resource":"subnetgroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SubnetGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: memorydbawskubedbcom-subnetgroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/memorydbawskubedbcom-subnetgroup-editor/README.md b/charts/memorydbawskubedbcom-subnetgroup-editor/README.md index c254b3c959..e8ea67f9f7 100644 --- a/charts/memorydbawskubedbcom-subnetgroup-editor/README.md +++ b/charts/memorydbawskubedbcom-subnetgroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/memorydbawskubedbcom-subnetgroup-editor --version=v0.23.0 -$ helm upgrade -i memorydbawskubedbcom-subnetgroup-editor appscode/memorydbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/memorydbawskubedbcom-subnetgroup-editor --version=v0.24.0 +$ helm upgrade -i memorydbawskubedbcom-subnetgroup-editor appscode/memorydbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SubnetGroup Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `memorydbawskubedbcom-subnetgroup-editor`: ```bash -$ helm upgrade -i memorydbawskubedbcom-subnetgroup-editor appscode/memorydbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i memorydbawskubedbcom-subnetgroup-editor appscode/memorydbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SubnetGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `memorydbawskubedbc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-subnetgroup-editor appscode/memorydbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 +$ helm upgrade -i memorydbawskubedbcom-subnetgroup-editor appscode/memorydbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=memorydb.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i memorydbawskubedbcom-subnetgroup-editor appscode/memorydbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i memorydbawskubedbcom-subnetgroup-editor appscode/memorydbawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metaappscodecom-resourcedescriptor-editor/Chart.yaml b/charts/metaappscodecom-resourcedescriptor-editor/Chart.yaml index f639a635e0..b85b52e3cb 100644 --- a/charts/metaappscodecom-resourcedescriptor-editor/Chart.yaml +++ b/charts/metaappscodecom-resourcedescriptor-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.appscode.com","version":"v1alpha1","resource":"resourcedescriptors"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceDescriptor Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metaappscodecom-resourcedescriptor-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metaappscodecom-resourcedescriptor-editor/README.md b/charts/metaappscodecom-resourcedescriptor-editor/README.md index f9fef02d42..b152d40a3d 100644 --- a/charts/metaappscodecom-resourcedescriptor-editor/README.md +++ b/charts/metaappscodecom-resourcedescriptor-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metaappscodecom-resourcedescriptor-editor --version=v0.23.0 -$ helm upgrade -i metaappscodecom-resourcedescriptor-editor appscode/metaappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metaappscodecom-resourcedescriptor-editor --version=v0.24.0 +$ helm upgrade -i metaappscodecom-resourcedescriptor-editor appscode/metaappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceDescriptor Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `metaappscodecom-resourcedescriptor-editor`: ```bash -$ helm upgrade -i metaappscodecom-resourcedescriptor-editor appscode/metaappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metaappscodecom-resourcedescriptor-editor appscode/metaappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceDescriptor Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metaappscodecom-re Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metaappscodecom-resourcedescriptor-editor appscode/metaappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.appscode.com/v1alpha1 +$ helm upgrade -i metaappscodecom-resourcedescriptor-editor appscode/metaappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metaappscodecom-resourcedescriptor-editor appscode/metaappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metaappscodecom-resourcedescriptor-editor appscode/metaappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-clusterprofile-editor/Chart.yaml b/charts/metak8sappscodecom-clusterprofile-editor/Chart.yaml index 9c42389830..f4414044f4 100644 --- a/charts/metak8sappscodecom-clusterprofile-editor/Chart.yaml +++ b/charts/metak8sappscodecom-clusterprofile-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"clusterprofiles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterProfile Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-clusterprofile-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metak8sappscodecom-clusterprofile-editor/README.md b/charts/metak8sappscodecom-clusterprofile-editor/README.md index d4cec1b638..e4d8ceba54 100644 --- a/charts/metak8sappscodecom-clusterprofile-editor/README.md +++ b/charts/metak8sappscodecom-clusterprofile-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-clusterprofile-editor --version=v0.23.0 -$ helm upgrade -i metak8sappscodecom-clusterprofile-editor appscode/metak8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metak8sappscodecom-clusterprofile-editor --version=v0.24.0 +$ helm upgrade -i metak8sappscodecom-clusterprofile-editor appscode/metak8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterProfile Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `metak8sappscodecom-clusterprofile-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-clusterprofile-editor appscode/metak8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metak8sappscodecom-clusterprofile-editor appscode/metak8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterProfile Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-clusterprofile-editor appscode/metak8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-clusterprofile-editor appscode/metak8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-clusterprofile-editor appscode/metak8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-clusterprofile-editor appscode/metak8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-clusterstatus-editor/Chart.yaml b/charts/metak8sappscodecom-clusterstatus-editor/Chart.yaml index 0dcf7ba5ea..77471293de 100644 --- a/charts/metak8sappscodecom-clusterstatus-editor/Chart.yaml +++ b/charts/metak8sappscodecom-clusterstatus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"clusterstatuses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterStatus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-clusterstatus-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metak8sappscodecom-clusterstatus-editor/README.md b/charts/metak8sappscodecom-clusterstatus-editor/README.md index 0186da35bd..3a5082c925 100644 --- a/charts/metak8sappscodecom-clusterstatus-editor/README.md +++ b/charts/metak8sappscodecom-clusterstatus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-clusterstatus-editor --version=v0.23.0 -$ helm upgrade -i metak8sappscodecom-clusterstatus-editor appscode/metak8sappscodecom-clusterstatus-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metak8sappscodecom-clusterstatus-editor --version=v0.24.0 +$ helm upgrade -i metak8sappscodecom-clusterstatus-editor appscode/metak8sappscodecom-clusterstatus-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterStatus Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `metak8sappscodecom-clusterstatus-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-clusterstatus-editor appscode/metak8sappscodecom-clusterstatus-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metak8sappscodecom-clusterstatus-editor appscode/metak8sappscodecom-clusterstatus-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterStatus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-clusterstatus-editor appscode/metak8sappscodecom-clusterstatus-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-clusterstatus-editor appscode/metak8sappscodecom-clusterstatus-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-clusterstatus-editor appscode/metak8sappscodecom-clusterstatus-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-clusterstatus-editor appscode/metak8sappscodecom-clusterstatus-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-gatewayinfo-editor/Chart.yaml b/charts/metak8sappscodecom-gatewayinfo-editor/Chart.yaml index e9e3a205ad..4c1a2a0348 100644 --- a/charts/metak8sappscodecom-gatewayinfo-editor/Chart.yaml +++ b/charts/metak8sappscodecom-gatewayinfo-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"gatewayinfoes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GatewayInfo Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-gatewayinfo-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metak8sappscodecom-gatewayinfo-editor/README.md b/charts/metak8sappscodecom-gatewayinfo-editor/README.md index 266a21bfe7..a281d7f14e 100644 --- a/charts/metak8sappscodecom-gatewayinfo-editor/README.md +++ b/charts/metak8sappscodecom-gatewayinfo-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-gatewayinfo-editor --version=v0.23.0 -$ helm upgrade -i metak8sappscodecom-gatewayinfo-editor appscode/metak8sappscodecom-gatewayinfo-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metak8sappscodecom-gatewayinfo-editor --version=v0.24.0 +$ helm upgrade -i metak8sappscodecom-gatewayinfo-editor appscode/metak8sappscodecom-gatewayinfo-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GatewayInfo Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `metak8sappscodecom-gatewayinfo-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-gatewayinfo-editor appscode/metak8sappscodecom-gatewayinfo-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metak8sappscodecom-gatewayinfo-editor appscode/metak8sappscodecom-gatewayinfo-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GatewayInfo Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-gatewayinfo-editor appscode/metak8sappscodecom-gatewayinfo-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-gatewayinfo-editor appscode/metak8sappscodecom-gatewayinfo-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-gatewayinfo-editor appscode/metak8sappscodecom-gatewayinfo-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-gatewayinfo-editor appscode/metak8sappscodecom-gatewayinfo-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-menu-editor/Chart.yaml b/charts/metak8sappscodecom-menu-editor/Chart.yaml index f17ef0a96e..1b11029394 100644 --- a/charts/metak8sappscodecom-menu-editor/Chart.yaml +++ b/charts/metak8sappscodecom-menu-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"menus"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Menu Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-menu-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metak8sappscodecom-menu-editor/README.md b/charts/metak8sappscodecom-menu-editor/README.md index 62bbca5bed..da18117261 100644 --- a/charts/metak8sappscodecom-menu-editor/README.md +++ b/charts/metak8sappscodecom-menu-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-menu-editor --version=v0.23.0 -$ helm upgrade -i metak8sappscodecom-menu-editor appscode/metak8sappscodecom-menu-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metak8sappscodecom-menu-editor --version=v0.24.0 +$ helm upgrade -i metak8sappscodecom-menu-editor appscode/metak8sappscodecom-menu-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Menu Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `metak8sappscodecom-menu-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-menu-editor appscode/metak8sappscodecom-menu-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metak8sappscodecom-menu-editor appscode/metak8sappscodecom-menu-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Menu Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-menu-editor appscode/metak8sappscodecom-menu-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-menu-editor appscode/metak8sappscodecom-menu-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-menu-editor appscode/metak8sappscodecom-menu-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-menu-editor appscode/metak8sappscodecom-menu-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-menuoutline-editor/Chart.yaml b/charts/metak8sappscodecom-menuoutline-editor/Chart.yaml index 2197bc0bf6..c27f3cbfaf 100644 --- a/charts/metak8sappscodecom-menuoutline-editor/Chart.yaml +++ b/charts/metak8sappscodecom-menuoutline-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"menuoutlines"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MenuOutline Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-menuoutline-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metak8sappscodecom-menuoutline-editor/README.md b/charts/metak8sappscodecom-menuoutline-editor/README.md index f7d8827c82..63d3ea2647 100644 --- a/charts/metak8sappscodecom-menuoutline-editor/README.md +++ b/charts/metak8sappscodecom-menuoutline-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-menuoutline-editor --version=v0.23.0 -$ helm upgrade -i metak8sappscodecom-menuoutline-editor appscode/metak8sappscodecom-menuoutline-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metak8sappscodecom-menuoutline-editor --version=v0.24.0 +$ helm upgrade -i metak8sappscodecom-menuoutline-editor appscode/metak8sappscodecom-menuoutline-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MenuOutline Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `metak8sappscodecom-menuoutline-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-menuoutline-editor appscode/metak8sappscodecom-menuoutline-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metak8sappscodecom-menuoutline-editor appscode/metak8sappscodecom-menuoutline-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MenuOutline Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-menuoutline-editor appscode/metak8sappscodecom-menuoutline-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-menuoutline-editor appscode/metak8sappscodecom-menuoutline-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-menuoutline-editor appscode/metak8sappscodecom-menuoutline-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-menuoutline-editor appscode/metak8sappscodecom-menuoutline-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-project-editor/Chart.yaml b/charts/metak8sappscodecom-project-editor/Chart.yaml index 3bdea92ceb..3b10e6bec6 100644 --- a/charts/metak8sappscodecom-project-editor/Chart.yaml +++ b/charts/metak8sappscodecom-project-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"projects"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Project Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-project-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metak8sappscodecom-project-editor/README.md b/charts/metak8sappscodecom-project-editor/README.md index 4a2a6f6be5..c424a3de7e 100644 --- a/charts/metak8sappscodecom-project-editor/README.md +++ b/charts/metak8sappscodecom-project-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-project-editor --version=v0.23.0 -$ helm upgrade -i metak8sappscodecom-project-editor appscode/metak8sappscodecom-project-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metak8sappscodecom-project-editor --version=v0.24.0 +$ helm upgrade -i metak8sappscodecom-project-editor appscode/metak8sappscodecom-project-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Project Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `metak8sappscodecom-project-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-project-editor appscode/metak8sappscodecom-project-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metak8sappscodecom-project-editor appscode/metak8sappscodecom-project-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Project Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-project-editor appscode/metak8sappscodecom-project-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-project-editor appscode/metak8sappscodecom-project-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-project-editor appscode/metak8sappscodecom-project-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-project-editor appscode/metak8sappscodecom-project-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourceblockdefinition-editor/Chart.yaml b/charts/metak8sappscodecom-resourceblockdefinition-editor/Chart.yaml index ea00a1e382..2863b6a3a8 100644 --- a/charts/metak8sappscodecom-resourceblockdefinition-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourceblockdefinition-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourceblockdefinitions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceBlockDefinition Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourceblockdefinition-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metak8sappscodecom-resourceblockdefinition-editor/README.md b/charts/metak8sappscodecom-resourceblockdefinition-editor/README.md index 3b7bca971e..e1050f89b7 100644 --- a/charts/metak8sappscodecom-resourceblockdefinition-editor/README.md +++ b/charts/metak8sappscodecom-resourceblockdefinition-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourceblockdefinition-editor --version=v0.23.0 -$ helm upgrade -i metak8sappscodecom-resourceblockdefinition-editor appscode/metak8sappscodecom-resourceblockdefinition-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metak8sappscodecom-resourceblockdefinition-editor --version=v0.24.0 +$ helm upgrade -i metak8sappscodecom-resourceblockdefinition-editor appscode/metak8sappscodecom-resourceblockdefinition-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceBlockDefinition Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `metak8sappscodecom-resourceblockdefinition-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourceblockdefinition-editor appscode/metak8sappscodecom-resourceblockdefinition-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metak8sappscodecom-resourceblockdefinition-editor appscode/metak8sappscodecom-resourceblockdefinition-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceBlockDefinition Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourceblockdefinition-editor appscode/metak8sappscodecom-resourceblockdefinition-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourceblockdefinition-editor appscode/metak8sappscodecom-resourceblockdefinition-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourceblockdefinition-editor appscode/metak8sappscodecom-resourceblockdefinition-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourceblockdefinition-editor appscode/metak8sappscodecom-resourceblockdefinition-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourcecalculator-editor/Chart.yaml b/charts/metak8sappscodecom-resourcecalculator-editor/Chart.yaml index 760819b8fb..fc833860c2 100644 --- a/charts/metak8sappscodecom-resourcecalculator-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourcecalculator-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourcecalculators"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceCalculator Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourcecalculator-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metak8sappscodecom-resourcecalculator-editor/README.md b/charts/metak8sappscodecom-resourcecalculator-editor/README.md index 30b5349b33..d030437795 100644 --- a/charts/metak8sappscodecom-resourcecalculator-editor/README.md +++ b/charts/metak8sappscodecom-resourcecalculator-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourcecalculator-editor --version=v0.23.0 -$ helm upgrade -i metak8sappscodecom-resourcecalculator-editor appscode/metak8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metak8sappscodecom-resourcecalculator-editor --version=v0.24.0 +$ helm upgrade -i metak8sappscodecom-resourcecalculator-editor appscode/metak8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceCalculator Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `metak8sappscodecom-resourcecalculator-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourcecalculator-editor appscode/metak8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metak8sappscodecom-resourcecalculator-editor appscode/metak8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceCalculator Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcecalculator-editor appscode/metak8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourcecalculator-editor appscode/metak8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcecalculator-editor appscode/metak8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourcecalculator-editor appscode/metak8sappscodecom-resourcecalculator-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourcedashboard-editor/Chart.yaml b/charts/metak8sappscodecom-resourcedashboard-editor/Chart.yaml index 6eb1b51181..f987339357 100644 --- a/charts/metak8sappscodecom-resourcedashboard-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourcedashboard-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourcedashboards"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceDashboard Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourcedashboard-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metak8sappscodecom-resourcedashboard-editor/README.md b/charts/metak8sappscodecom-resourcedashboard-editor/README.md index eada82f476..40c6f438fb 100644 --- a/charts/metak8sappscodecom-resourcedashboard-editor/README.md +++ b/charts/metak8sappscodecom-resourcedashboard-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourcedashboard-editor --version=v0.23.0 -$ helm upgrade -i metak8sappscodecom-resourcedashboard-editor appscode/metak8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metak8sappscodecom-resourcedashboard-editor --version=v0.24.0 +$ helm upgrade -i metak8sappscodecom-resourcedashboard-editor appscode/metak8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceDashboard Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `metak8sappscodecom-resourcedashboard-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourcedashboard-editor appscode/metak8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metak8sappscodecom-resourcedashboard-editor appscode/metak8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceDashboard Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcedashboard-editor appscode/metak8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourcedashboard-editor appscode/metak8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcedashboard-editor appscode/metak8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourcedashboard-editor appscode/metak8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourcedescriptor-editor/Chart.yaml b/charts/metak8sappscodecom-resourcedescriptor-editor/Chart.yaml index 3bb6108816..7d968dce25 100644 --- a/charts/metak8sappscodecom-resourcedescriptor-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourcedescriptor-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourcedescriptors"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceDescriptor Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourcedescriptor-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metak8sappscodecom-resourcedescriptor-editor/README.md b/charts/metak8sappscodecom-resourcedescriptor-editor/README.md index e7303da78e..c737151820 100644 --- a/charts/metak8sappscodecom-resourcedescriptor-editor/README.md +++ b/charts/metak8sappscodecom-resourcedescriptor-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourcedescriptor-editor --version=v0.23.0 -$ helm upgrade -i metak8sappscodecom-resourcedescriptor-editor appscode/metak8sappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metak8sappscodecom-resourcedescriptor-editor --version=v0.24.0 +$ helm upgrade -i metak8sappscodecom-resourcedescriptor-editor appscode/metak8sappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceDescriptor Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `metak8sappscodecom-resourcedescriptor-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourcedescriptor-editor appscode/metak8sappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metak8sappscodecom-resourcedescriptor-editor appscode/metak8sappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceDescriptor Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcedescriptor-editor appscode/metak8sappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourcedescriptor-editor appscode/metak8sappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcedescriptor-editor appscode/metak8sappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourcedescriptor-editor appscode/metak8sappscodecom-resourcedescriptor-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourceeditor-editor/Chart.yaml b/charts/metak8sappscodecom-resourceeditor-editor/Chart.yaml index 6542e09867..b0f4ebc051 100644 --- a/charts/metak8sappscodecom-resourceeditor-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourceeditor-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourceeditors"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceEditor Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourceeditor-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metak8sappscodecom-resourceeditor-editor/README.md b/charts/metak8sappscodecom-resourceeditor-editor/README.md index 00f51a7e48..bbf079f970 100644 --- a/charts/metak8sappscodecom-resourceeditor-editor/README.md +++ b/charts/metak8sappscodecom-resourceeditor-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourceeditor-editor --version=v0.23.0 -$ helm upgrade -i metak8sappscodecom-resourceeditor-editor appscode/metak8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metak8sappscodecom-resourceeditor-editor --version=v0.24.0 +$ helm upgrade -i metak8sappscodecom-resourceeditor-editor appscode/metak8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceEditor Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `metak8sappscodecom-resourceeditor-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourceeditor-editor appscode/metak8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metak8sappscodecom-resourceeditor-editor appscode/metak8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceEditor Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourceeditor-editor appscode/metak8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourceeditor-editor appscode/metak8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourceeditor-editor appscode/metak8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourceeditor-editor appscode/metak8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourcelayout-editor/Chart.yaml b/charts/metak8sappscodecom-resourcelayout-editor/Chart.yaml index 2615827046..7a5f2e603b 100644 --- a/charts/metak8sappscodecom-resourcelayout-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourcelayout-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourcelayouts"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceLayout Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourcelayout-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metak8sappscodecom-resourcelayout-editor/README.md b/charts/metak8sappscodecom-resourcelayout-editor/README.md index cb9a69ce79..8030e5f1f7 100644 --- a/charts/metak8sappscodecom-resourcelayout-editor/README.md +++ b/charts/metak8sappscodecom-resourcelayout-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourcelayout-editor --version=v0.23.0 -$ helm upgrade -i metak8sappscodecom-resourcelayout-editor appscode/metak8sappscodecom-resourcelayout-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metak8sappscodecom-resourcelayout-editor --version=v0.24.0 +$ helm upgrade -i metak8sappscodecom-resourcelayout-editor appscode/metak8sappscodecom-resourcelayout-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceLayout Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `metak8sappscodecom-resourcelayout-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourcelayout-editor appscode/metak8sappscodecom-resourcelayout-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metak8sappscodecom-resourcelayout-editor appscode/metak8sappscodecom-resourcelayout-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceLayout Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcelayout-editor appscode/metak8sappscodecom-resourcelayout-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourcelayout-editor appscode/metak8sappscodecom-resourcelayout-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcelayout-editor appscode/metak8sappscodecom-resourcelayout-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourcelayout-editor appscode/metak8sappscodecom-resourcelayout-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourcemanifests-editor/Chart.yaml b/charts/metak8sappscodecom-resourcemanifests-editor/Chart.yaml index 1bf1bcb3d1..cc70902639 100644 --- a/charts/metak8sappscodecom-resourcemanifests-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourcemanifests-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourcemanifests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceManifests Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourcemanifests-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metak8sappscodecom-resourcemanifests-editor/README.md b/charts/metak8sappscodecom-resourcemanifests-editor/README.md index 03978156a3..5d1e405e02 100644 --- a/charts/metak8sappscodecom-resourcemanifests-editor/README.md +++ b/charts/metak8sappscodecom-resourcemanifests-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourcemanifests-editor --version=v0.23.0 -$ helm upgrade -i metak8sappscodecom-resourcemanifests-editor appscode/metak8sappscodecom-resourcemanifests-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metak8sappscodecom-resourcemanifests-editor --version=v0.24.0 +$ helm upgrade -i metak8sappscodecom-resourcemanifests-editor appscode/metak8sappscodecom-resourcemanifests-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceManifests Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `metak8sappscodecom-resourcemanifests-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourcemanifests-editor appscode/metak8sappscodecom-resourcemanifests-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metak8sappscodecom-resourcemanifests-editor appscode/metak8sappscodecom-resourcemanifests-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceManifests Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcemanifests-editor appscode/metak8sappscodecom-resourcemanifests-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourcemanifests-editor appscode/metak8sappscodecom-resourcemanifests-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcemanifests-editor appscode/metak8sappscodecom-resourcemanifests-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourcemanifests-editor appscode/metak8sappscodecom-resourcemanifests-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourceoutline-editor/Chart.yaml b/charts/metak8sappscodecom-resourceoutline-editor/Chart.yaml index 6d11105997..2ad49dfe15 100644 --- a/charts/metak8sappscodecom-resourceoutline-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourceoutline-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourceoutlines"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceOutline Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourceoutline-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metak8sappscodecom-resourceoutline-editor/README.md b/charts/metak8sappscodecom-resourceoutline-editor/README.md index 59f4642426..f8c2659966 100644 --- a/charts/metak8sappscodecom-resourceoutline-editor/README.md +++ b/charts/metak8sappscodecom-resourceoutline-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourceoutline-editor --version=v0.23.0 -$ helm upgrade -i metak8sappscodecom-resourceoutline-editor appscode/metak8sappscodecom-resourceoutline-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metak8sappscodecom-resourceoutline-editor --version=v0.24.0 +$ helm upgrade -i metak8sappscodecom-resourceoutline-editor appscode/metak8sappscodecom-resourceoutline-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceOutline Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `metak8sappscodecom-resourceoutline-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourceoutline-editor appscode/metak8sappscodecom-resourceoutline-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metak8sappscodecom-resourceoutline-editor appscode/metak8sappscodecom-resourceoutline-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceOutline Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourceoutline-editor appscode/metak8sappscodecom-resourceoutline-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourceoutline-editor appscode/metak8sappscodecom-resourceoutline-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourceoutline-editor appscode/metak8sappscodecom-resourceoutline-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourceoutline-editor appscode/metak8sappscodecom-resourceoutline-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourceoutlinefilter-editor/Chart.yaml b/charts/metak8sappscodecom-resourceoutlinefilter-editor/Chart.yaml index 896c4b74a7..16989ec23b 100644 --- a/charts/metak8sappscodecom-resourceoutlinefilter-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourceoutlinefilter-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourceoutlinefilters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceOutlineFilter Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourceoutlinefilter-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metak8sappscodecom-resourceoutlinefilter-editor/README.md b/charts/metak8sappscodecom-resourceoutlinefilter-editor/README.md index f3248638d2..4f3e79a454 100644 --- a/charts/metak8sappscodecom-resourceoutlinefilter-editor/README.md +++ b/charts/metak8sappscodecom-resourceoutlinefilter-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourceoutlinefilter-editor --version=v0.23.0 -$ helm upgrade -i metak8sappscodecom-resourceoutlinefilter-editor appscode/metak8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metak8sappscodecom-resourceoutlinefilter-editor --version=v0.24.0 +$ helm upgrade -i metak8sappscodecom-resourceoutlinefilter-editor appscode/metak8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceOutlineFilter Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `metak8sappscodecom-resourceoutlinefilter-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourceoutlinefilter-editor appscode/metak8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metak8sappscodecom-resourceoutlinefilter-editor appscode/metak8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceOutlineFilter Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourceoutlinefilter-editor appscode/metak8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourceoutlinefilter-editor appscode/metak8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourceoutlinefilter-editor appscode/metak8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourceoutlinefilter-editor appscode/metak8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metak8sappscodecom-resourcetabledefinition-editor/Chart.yaml b/charts/metak8sappscodecom-resourcetabledefinition-editor/Chart.yaml index 0e8cdd7cd5..2729d9c4dd 100644 --- a/charts/metak8sappscodecom-resourcetabledefinition-editor/Chart.yaml +++ b/charts/metak8sappscodecom-resourcetabledefinition-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"meta.k8s.appscode.com","version":"v1alpha1","resource":"resourcetabledefinitions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceTableDefinition Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metak8sappscodecom-resourcetabledefinition-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metak8sappscodecom-resourcetabledefinition-editor/README.md b/charts/metak8sappscodecom-resourcetabledefinition-editor/README.md index 532ef107e9..d29c0a3374 100644 --- a/charts/metak8sappscodecom-resourcetabledefinition-editor/README.md +++ b/charts/metak8sappscodecom-resourcetabledefinition-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metak8sappscodecom-resourcetabledefinition-editor --version=v0.23.0 -$ helm upgrade -i metak8sappscodecom-resourcetabledefinition-editor appscode/metak8sappscodecom-resourcetabledefinition-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metak8sappscodecom-resourcetabledefinition-editor --version=v0.24.0 +$ helm upgrade -i metak8sappscodecom-resourcetabledefinition-editor appscode/metak8sappscodecom-resourcetabledefinition-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceTableDefinition Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `metak8sappscodecom-resourcetabledefinition-editor`: ```bash -$ helm upgrade -i metak8sappscodecom-resourcetabledefinition-editor appscode/metak8sappscodecom-resourcetabledefinition-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metak8sappscodecom-resourcetabledefinition-editor appscode/metak8sappscodecom-resourcetabledefinition-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceTableDefinition Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metak8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcetabledefinition-editor appscode/metak8sappscodecom-resourcetabledefinition-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 +$ helm upgrade -i metak8sappscodecom-resourcetabledefinition-editor appscode/metak8sappscodecom-resourcetabledefinition-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=meta.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metak8sappscodecom-resourcetabledefinition-editor appscode/metak8sappscodecom-resourcetabledefinition-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metak8sappscodecom-resourcetabledefinition-editor appscode/metak8sappscodecom-resourcetabledefinition-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/metricsappscodecom-metricsconfiguration-editor/Chart.yaml b/charts/metricsappscodecom-metricsconfiguration-editor/Chart.yaml index b401a8a8f4..2d2e4552d2 100644 --- a/charts/metricsappscodecom-metricsconfiguration-editor/Chart.yaml +++ b/charts/metricsappscodecom-metricsconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"metrics.appscode.com","version":"v1alpha1","resource":"metricsconfigurations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MetricsConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: metricsappscodecom-metricsconfiguration-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/metricsappscodecom-metricsconfiguration-editor/README.md b/charts/metricsappscodecom-metricsconfiguration-editor/README.md index 86f1f13ee2..bcdf7fb96b 100644 --- a/charts/metricsappscodecom-metricsconfiguration-editor/README.md +++ b/charts/metricsappscodecom-metricsconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/metricsappscodecom-metricsconfiguration-editor --version=v0.23.0 -$ helm upgrade -i metricsappscodecom-metricsconfiguration-editor appscode/metricsappscodecom-metricsconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/metricsappscodecom-metricsconfiguration-editor --version=v0.24.0 +$ helm upgrade -i metricsappscodecom-metricsconfiguration-editor appscode/metricsappscodecom-metricsconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MetricsConfiguration Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `metricsappscodecom-metricsconfiguration-editor`: ```bash -$ helm upgrade -i metricsappscodecom-metricsconfiguration-editor appscode/metricsappscodecom-metricsconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i metricsappscodecom-metricsconfiguration-editor appscode/metricsappscodecom-metricsconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MetricsConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `metricsappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i metricsappscodecom-metricsconfiguration-editor appscode/metricsappscodecom-metricsconfiguration-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=metrics.appscode.com/v1alpha1 +$ helm upgrade -i metricsappscodecom-metricsconfiguration-editor appscode/metricsappscodecom-metricsconfiguration-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=metrics.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i metricsappscodecom-metricsconfiguration-editor appscode/metricsappscodecom-metricsconfiguration-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i metricsappscodecom-metricsconfiguration-editor appscode/metricsappscodecom-metricsconfiguration-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-alertmanager-editor/Chart.yaml b/charts/monitoringcoreoscom-alertmanager-editor/Chart.yaml index b780fd2c21..8a519b9bfa 100644 --- a/charts/monitoringcoreoscom-alertmanager-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-alertmanager-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1","resource":"alertmanagers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Alertmanager Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-alertmanager-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/monitoringcoreoscom-alertmanager-editor/README.md b/charts/monitoringcoreoscom-alertmanager-editor/README.md index 473157f3e6..19c1918836 100644 --- a/charts/monitoringcoreoscom-alertmanager-editor/README.md +++ b/charts/monitoringcoreoscom-alertmanager-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-alertmanager-editor --version=v0.23.0 -$ helm upgrade -i monitoringcoreoscom-alertmanager-editor appscode/monitoringcoreoscom-alertmanager-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/monitoringcoreoscom-alertmanager-editor --version=v0.24.0 +$ helm upgrade -i monitoringcoreoscom-alertmanager-editor appscode/monitoringcoreoscom-alertmanager-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Alertmanager Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `monitoringcoreoscom-alertmanager-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-alertmanager-editor appscode/monitoringcoreoscom-alertmanager-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i monitoringcoreoscom-alertmanager-editor appscode/monitoringcoreoscom-alertmanager-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Alertmanager Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-alertmanager-editor appscode/monitoringcoreoscom-alertmanager-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=monitoring.coreos.com/v1 +$ helm upgrade -i monitoringcoreoscom-alertmanager-editor appscode/monitoringcoreoscom-alertmanager-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=monitoring.coreos.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-alertmanager-editor appscode/monitoringcoreoscom-alertmanager-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-alertmanager-editor appscode/monitoringcoreoscom-alertmanager-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-alertmanagerconfig-editor/Chart.yaml b/charts/monitoringcoreoscom-alertmanagerconfig-editor/Chart.yaml index 4335bbf727..f7e3be76bc 100644 --- a/charts/monitoringcoreoscom-alertmanagerconfig-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-alertmanagerconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1alpha1","resource":"alertmanagerconfigs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AlertmanagerConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-alertmanagerconfig-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/monitoringcoreoscom-alertmanagerconfig-editor/README.md b/charts/monitoringcoreoscom-alertmanagerconfig-editor/README.md index 6e796932fe..d736097139 100644 --- a/charts/monitoringcoreoscom-alertmanagerconfig-editor/README.md +++ b/charts/monitoringcoreoscom-alertmanagerconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-alertmanagerconfig-editor --version=v0.23.0 -$ helm upgrade -i monitoringcoreoscom-alertmanagerconfig-editor appscode/monitoringcoreoscom-alertmanagerconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/monitoringcoreoscom-alertmanagerconfig-editor --version=v0.24.0 +$ helm upgrade -i monitoringcoreoscom-alertmanagerconfig-editor appscode/monitoringcoreoscom-alertmanagerconfig-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AlertmanagerConfig Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `monitoringcoreoscom-alertmanagerconfig-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-alertmanagerconfig-editor appscode/monitoringcoreoscom-alertmanagerconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i monitoringcoreoscom-alertmanagerconfig-editor appscode/monitoringcoreoscom-alertmanagerconfig-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AlertmanagerConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-alertmanagerconfig-editor appscode/monitoringcoreoscom-alertmanagerconfig-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=monitoring.coreos.com/v1alpha1 +$ helm upgrade -i monitoringcoreoscom-alertmanagerconfig-editor appscode/monitoringcoreoscom-alertmanagerconfig-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=monitoring.coreos.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-alertmanagerconfig-editor appscode/monitoringcoreoscom-alertmanagerconfig-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-alertmanagerconfig-editor appscode/monitoringcoreoscom-alertmanagerconfig-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-podmonitor-editor/Chart.yaml b/charts/monitoringcoreoscom-podmonitor-editor/Chart.yaml index 8dd144ed29..c3134edb63 100644 --- a/charts/monitoringcoreoscom-podmonitor-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-podmonitor-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1","resource":"podmonitors"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PodMonitor Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-podmonitor-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/monitoringcoreoscom-podmonitor-editor/README.md b/charts/monitoringcoreoscom-podmonitor-editor/README.md index 2e19326e00..c2537c983f 100644 --- a/charts/monitoringcoreoscom-podmonitor-editor/README.md +++ b/charts/monitoringcoreoscom-podmonitor-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-podmonitor-editor --version=v0.23.0 -$ helm upgrade -i monitoringcoreoscom-podmonitor-editor appscode/monitoringcoreoscom-podmonitor-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/monitoringcoreoscom-podmonitor-editor --version=v0.24.0 +$ helm upgrade -i monitoringcoreoscom-podmonitor-editor appscode/monitoringcoreoscom-podmonitor-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PodMonitor Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `monitoringcoreoscom-podmonitor-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-podmonitor-editor appscode/monitoringcoreoscom-podmonitor-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i monitoringcoreoscom-podmonitor-editor appscode/monitoringcoreoscom-podmonitor-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PodMonitor Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-podmonitor-editor appscode/monitoringcoreoscom-podmonitor-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=monitoring.coreos.com/v1 +$ helm upgrade -i monitoringcoreoscom-podmonitor-editor appscode/monitoringcoreoscom-podmonitor-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=monitoring.coreos.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-podmonitor-editor appscode/monitoringcoreoscom-podmonitor-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-podmonitor-editor appscode/monitoringcoreoscom-podmonitor-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-probe-editor/Chart.yaml b/charts/monitoringcoreoscom-probe-editor/Chart.yaml index c5d753ab27..2214b312f0 100644 --- a/charts/monitoringcoreoscom-probe-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-probe-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1","resource":"probes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Probe Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-probe-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/monitoringcoreoscom-probe-editor/README.md b/charts/monitoringcoreoscom-probe-editor/README.md index 551d7d6e08..cae1ac7f93 100644 --- a/charts/monitoringcoreoscom-probe-editor/README.md +++ b/charts/monitoringcoreoscom-probe-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-probe-editor --version=v0.23.0 -$ helm upgrade -i monitoringcoreoscom-probe-editor appscode/monitoringcoreoscom-probe-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/monitoringcoreoscom-probe-editor --version=v0.24.0 +$ helm upgrade -i monitoringcoreoscom-probe-editor appscode/monitoringcoreoscom-probe-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Probe Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `monitoringcoreoscom-probe-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-probe-editor appscode/monitoringcoreoscom-probe-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i monitoringcoreoscom-probe-editor appscode/monitoringcoreoscom-probe-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Probe Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-probe-editor appscode/monitoringcoreoscom-probe-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=monitoring.coreos.com/v1 +$ helm upgrade -i monitoringcoreoscom-probe-editor appscode/monitoringcoreoscom-probe-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=monitoring.coreos.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-probe-editor appscode/monitoringcoreoscom-probe-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-probe-editor appscode/monitoringcoreoscom-probe-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-prometheus-editor/Chart.yaml b/charts/monitoringcoreoscom-prometheus-editor/Chart.yaml index 0cfd440af3..bdbd23ead1 100644 --- a/charts/monitoringcoreoscom-prometheus-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-prometheus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1","resource":"prometheuses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Prometheus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-prometheus-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/monitoringcoreoscom-prometheus-editor/README.md b/charts/monitoringcoreoscom-prometheus-editor/README.md index 18740085f3..60e9ab0c08 100644 --- a/charts/monitoringcoreoscom-prometheus-editor/README.md +++ b/charts/monitoringcoreoscom-prometheus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-prometheus-editor --version=v0.23.0 -$ helm upgrade -i monitoringcoreoscom-prometheus-editor appscode/monitoringcoreoscom-prometheus-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/monitoringcoreoscom-prometheus-editor --version=v0.24.0 +$ helm upgrade -i monitoringcoreoscom-prometheus-editor appscode/monitoringcoreoscom-prometheus-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Prometheus Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `monitoringcoreoscom-prometheus-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheus-editor appscode/monitoringcoreoscom-prometheus-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i monitoringcoreoscom-prometheus-editor appscode/monitoringcoreoscom-prometheus-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Prometheus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheus-editor appscode/monitoringcoreoscom-prometheus-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=monitoring.coreos.com/v1 +$ helm upgrade -i monitoringcoreoscom-prometheus-editor appscode/monitoringcoreoscom-prometheus-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=monitoring.coreos.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheus-editor appscode/monitoringcoreoscom-prometheus-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-prometheus-editor appscode/monitoringcoreoscom-prometheus-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-prometheusagent-editor/Chart.yaml b/charts/monitoringcoreoscom-prometheusagent-editor/Chart.yaml index 4164f478bb..e4607818a0 100644 --- a/charts/monitoringcoreoscom-prometheusagent-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-prometheusagent-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1alpha1","resource":"prometheusagents"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PrometheusAgent Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-prometheusagent-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/monitoringcoreoscom-prometheusagent-editor/README.md b/charts/monitoringcoreoscom-prometheusagent-editor/README.md index ba639cb255..9d399d3149 100644 --- a/charts/monitoringcoreoscom-prometheusagent-editor/README.md +++ b/charts/monitoringcoreoscom-prometheusagent-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-prometheusagent-editor --version=v0.23.0 -$ helm upgrade -i monitoringcoreoscom-prometheusagent-editor appscode/monitoringcoreoscom-prometheusagent-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/monitoringcoreoscom-prometheusagent-editor --version=v0.24.0 +$ helm upgrade -i monitoringcoreoscom-prometheusagent-editor appscode/monitoringcoreoscom-prometheusagent-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PrometheusAgent Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `monitoringcoreoscom-prometheusagent-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheusagent-editor appscode/monitoringcoreoscom-prometheusagent-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i monitoringcoreoscom-prometheusagent-editor appscode/monitoringcoreoscom-prometheusagent-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PrometheusAgent Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheusagent-editor appscode/monitoringcoreoscom-prometheusagent-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=monitoring.coreos.com/v1alpha1 +$ helm upgrade -i monitoringcoreoscom-prometheusagent-editor appscode/monitoringcoreoscom-prometheusagent-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=monitoring.coreos.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheusagent-editor appscode/monitoringcoreoscom-prometheusagent-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-prometheusagent-editor appscode/monitoringcoreoscom-prometheusagent-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-prometheusrule-editor/Chart.yaml b/charts/monitoringcoreoscom-prometheusrule-editor/Chart.yaml index 1f2c52b843..2fd5ff02ef 100644 --- a/charts/monitoringcoreoscom-prometheusrule-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-prometheusrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1","resource":"prometheusrules"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PrometheusRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-prometheusrule-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/monitoringcoreoscom-prometheusrule-editor/README.md b/charts/monitoringcoreoscom-prometheusrule-editor/README.md index c294c5de49..e8a332cb1b 100644 --- a/charts/monitoringcoreoscom-prometheusrule-editor/README.md +++ b/charts/monitoringcoreoscom-prometheusrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-prometheusrule-editor --version=v0.23.0 -$ helm upgrade -i monitoringcoreoscom-prometheusrule-editor appscode/monitoringcoreoscom-prometheusrule-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/monitoringcoreoscom-prometheusrule-editor --version=v0.24.0 +$ helm upgrade -i monitoringcoreoscom-prometheusrule-editor appscode/monitoringcoreoscom-prometheusrule-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PrometheusRule Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `monitoringcoreoscom-prometheusrule-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheusrule-editor appscode/monitoringcoreoscom-prometheusrule-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i monitoringcoreoscom-prometheusrule-editor appscode/monitoringcoreoscom-prometheusrule-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PrometheusRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheusrule-editor appscode/monitoringcoreoscom-prometheusrule-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=monitoring.coreos.com/v1 +$ helm upgrade -i monitoringcoreoscom-prometheusrule-editor appscode/monitoringcoreoscom-prometheusrule-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=monitoring.coreos.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-prometheusrule-editor appscode/monitoringcoreoscom-prometheusrule-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-prometheusrule-editor appscode/monitoringcoreoscom-prometheusrule-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-scrapeconfig-editor/Chart.yaml b/charts/monitoringcoreoscom-scrapeconfig-editor/Chart.yaml index 0e12a0e4e5..533f45f75d 100644 --- a/charts/monitoringcoreoscom-scrapeconfig-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-scrapeconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1alpha1","resource":"scrapeconfigs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ScrapeConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-scrapeconfig-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/monitoringcoreoscom-scrapeconfig-editor/README.md b/charts/monitoringcoreoscom-scrapeconfig-editor/README.md index 883a66b013..8c42324606 100644 --- a/charts/monitoringcoreoscom-scrapeconfig-editor/README.md +++ b/charts/monitoringcoreoscom-scrapeconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-scrapeconfig-editor --version=v0.23.0 -$ helm upgrade -i monitoringcoreoscom-scrapeconfig-editor appscode/monitoringcoreoscom-scrapeconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/monitoringcoreoscom-scrapeconfig-editor --version=v0.24.0 +$ helm upgrade -i monitoringcoreoscom-scrapeconfig-editor appscode/monitoringcoreoscom-scrapeconfig-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ScrapeConfig Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `monitoringcoreoscom-scrapeconfig-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-scrapeconfig-editor appscode/monitoringcoreoscom-scrapeconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i monitoringcoreoscom-scrapeconfig-editor appscode/monitoringcoreoscom-scrapeconfig-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ScrapeConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-scrapeconfig-editor appscode/monitoringcoreoscom-scrapeconfig-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=monitoring.coreos.com/v1alpha1 +$ helm upgrade -i monitoringcoreoscom-scrapeconfig-editor appscode/monitoringcoreoscom-scrapeconfig-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=monitoring.coreos.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-scrapeconfig-editor appscode/monitoringcoreoscom-scrapeconfig-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-scrapeconfig-editor appscode/monitoringcoreoscom-scrapeconfig-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-servicemonitor-editor/Chart.yaml b/charts/monitoringcoreoscom-servicemonitor-editor/Chart.yaml index ece3dfb353..4931c073b3 100644 --- a/charts/monitoringcoreoscom-servicemonitor-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-servicemonitor-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1","resource":"servicemonitors"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ServiceMonitor Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-servicemonitor-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/monitoringcoreoscom-servicemonitor-editor/README.md b/charts/monitoringcoreoscom-servicemonitor-editor/README.md index 6ec1aee8ee..c3833bdf5f 100644 --- a/charts/monitoringcoreoscom-servicemonitor-editor/README.md +++ b/charts/monitoringcoreoscom-servicemonitor-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-servicemonitor-editor --version=v0.23.0 -$ helm upgrade -i monitoringcoreoscom-servicemonitor-editor appscode/monitoringcoreoscom-servicemonitor-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/monitoringcoreoscom-servicemonitor-editor --version=v0.24.0 +$ helm upgrade -i monitoringcoreoscom-servicemonitor-editor appscode/monitoringcoreoscom-servicemonitor-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ServiceMonitor Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `monitoringcoreoscom-servicemonitor-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-servicemonitor-editor appscode/monitoringcoreoscom-servicemonitor-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i monitoringcoreoscom-servicemonitor-editor appscode/monitoringcoreoscom-servicemonitor-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ServiceMonitor Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-servicemonitor-editor appscode/monitoringcoreoscom-servicemonitor-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=monitoring.coreos.com/v1 +$ helm upgrade -i monitoringcoreoscom-servicemonitor-editor appscode/monitoringcoreoscom-servicemonitor-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=monitoring.coreos.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-servicemonitor-editor appscode/monitoringcoreoscom-servicemonitor-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-servicemonitor-editor appscode/monitoringcoreoscom-servicemonitor-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/monitoringcoreoscom-thanosruler-editor/Chart.yaml b/charts/monitoringcoreoscom-thanosruler-editor/Chart.yaml index aecaf67e12..06d282dc7e 100644 --- a/charts/monitoringcoreoscom-thanosruler-editor/Chart.yaml +++ b/charts/monitoringcoreoscom-thanosruler-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"monitoring.coreos.com","version":"v1","resource":"thanosrulers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ThanosRuler Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: monitoringcoreoscom-thanosruler-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/monitoringcoreoscom-thanosruler-editor/README.md b/charts/monitoringcoreoscom-thanosruler-editor/README.md index 62e4f66681..326cbc3909 100644 --- a/charts/monitoringcoreoscom-thanosruler-editor/README.md +++ b/charts/monitoringcoreoscom-thanosruler-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/monitoringcoreoscom-thanosruler-editor --version=v0.23.0 -$ helm upgrade -i monitoringcoreoscom-thanosruler-editor appscode/monitoringcoreoscom-thanosruler-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/monitoringcoreoscom-thanosruler-editor --version=v0.24.0 +$ helm upgrade -i monitoringcoreoscom-thanosruler-editor appscode/monitoringcoreoscom-thanosruler-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ThanosRuler Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `monitoringcoreoscom-thanosruler-editor`: ```bash -$ helm upgrade -i monitoringcoreoscom-thanosruler-editor appscode/monitoringcoreoscom-thanosruler-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i monitoringcoreoscom-thanosruler-editor appscode/monitoringcoreoscom-thanosruler-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ThanosRuler Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `monitoringcoreosco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-thanosruler-editor appscode/monitoringcoreoscom-thanosruler-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=monitoring.coreos.com/v1 +$ helm upgrade -i monitoringcoreoscom-thanosruler-editor appscode/monitoringcoreoscom-thanosruler-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=monitoring.coreos.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i monitoringcoreoscom-thanosruler-editor appscode/monitoringcoreoscom-thanosruler-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i monitoringcoreoscom-thanosruler-editor appscode/monitoringcoreoscom-thanosruler-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/mutationsgatekeepersh-assign-editor/Chart.yaml b/charts/mutationsgatekeepersh-assign-editor/Chart.yaml index efc06a844c..084c59377c 100644 --- a/charts/mutationsgatekeepersh-assign-editor/Chart.yaml +++ b/charts/mutationsgatekeepersh-assign-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"mutations.gatekeeper.sh","version":"v1","resource":"assign"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Assign Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: mutationsgatekeepersh-assign-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/mutationsgatekeepersh-assign-editor/README.md b/charts/mutationsgatekeepersh-assign-editor/README.md index e9c7ee5ce8..8b26e945e1 100644 --- a/charts/mutationsgatekeepersh-assign-editor/README.md +++ b/charts/mutationsgatekeepersh-assign-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/mutationsgatekeepersh-assign-editor --version=v0.23.0 -$ helm upgrade -i mutationsgatekeepersh-assign-editor appscode/mutationsgatekeepersh-assign-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/mutationsgatekeepersh-assign-editor --version=v0.24.0 +$ helm upgrade -i mutationsgatekeepersh-assign-editor appscode/mutationsgatekeepersh-assign-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Assign Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `mutationsgatekeepersh-assign-editor`: ```bash -$ helm upgrade -i mutationsgatekeepersh-assign-editor appscode/mutationsgatekeepersh-assign-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i mutationsgatekeepersh-assign-editor appscode/mutationsgatekeepersh-assign-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Assign Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `mutationsgatekeepe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i mutationsgatekeepersh-assign-editor appscode/mutationsgatekeepersh-assign-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=mutations.gatekeeper.sh/v1 +$ helm upgrade -i mutationsgatekeepersh-assign-editor appscode/mutationsgatekeepersh-assign-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=mutations.gatekeeper.sh/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i mutationsgatekeepersh-assign-editor appscode/mutationsgatekeepersh-assign-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i mutationsgatekeepersh-assign-editor appscode/mutationsgatekeepersh-assign-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/mutationsgatekeepersh-assignimage-editor/Chart.yaml b/charts/mutationsgatekeepersh-assignimage-editor/Chart.yaml index e077a06a1e..520da34057 100644 --- a/charts/mutationsgatekeepersh-assignimage-editor/Chart.yaml +++ b/charts/mutationsgatekeepersh-assignimage-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"mutations.gatekeeper.sh","version":"v1alpha1","resource":"assignimage"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AssignImage Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: mutationsgatekeepersh-assignimage-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/mutationsgatekeepersh-assignimage-editor/README.md b/charts/mutationsgatekeepersh-assignimage-editor/README.md index b921caaaf6..737d90e5bf 100644 --- a/charts/mutationsgatekeepersh-assignimage-editor/README.md +++ b/charts/mutationsgatekeepersh-assignimage-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/mutationsgatekeepersh-assignimage-editor --version=v0.23.0 -$ helm upgrade -i mutationsgatekeepersh-assignimage-editor appscode/mutationsgatekeepersh-assignimage-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/mutationsgatekeepersh-assignimage-editor --version=v0.24.0 +$ helm upgrade -i mutationsgatekeepersh-assignimage-editor appscode/mutationsgatekeepersh-assignimage-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AssignImage Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `mutationsgatekeepersh-assignimage-editor`: ```bash -$ helm upgrade -i mutationsgatekeepersh-assignimage-editor appscode/mutationsgatekeepersh-assignimage-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i mutationsgatekeepersh-assignimage-editor appscode/mutationsgatekeepersh-assignimage-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AssignImage Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `mutationsgatekeepe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i mutationsgatekeepersh-assignimage-editor appscode/mutationsgatekeepersh-assignimage-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=mutations.gatekeeper.sh/v1alpha1 +$ helm upgrade -i mutationsgatekeepersh-assignimage-editor appscode/mutationsgatekeepersh-assignimage-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=mutations.gatekeeper.sh/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i mutationsgatekeepersh-assignimage-editor appscode/mutationsgatekeepersh-assignimage-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i mutationsgatekeepersh-assignimage-editor appscode/mutationsgatekeepersh-assignimage-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/mutationsgatekeepersh-assignmetadata-editor/Chart.yaml b/charts/mutationsgatekeepersh-assignmetadata-editor/Chart.yaml index 3c64843429..49d7cb2ee9 100644 --- a/charts/mutationsgatekeepersh-assignmetadata-editor/Chart.yaml +++ b/charts/mutationsgatekeepersh-assignmetadata-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"mutations.gatekeeper.sh","version":"v1","resource":"assignmetadata"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AssignMetadata Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: mutationsgatekeepersh-assignmetadata-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/mutationsgatekeepersh-assignmetadata-editor/README.md b/charts/mutationsgatekeepersh-assignmetadata-editor/README.md index 14d6c36b20..3ba9a11e62 100644 --- a/charts/mutationsgatekeepersh-assignmetadata-editor/README.md +++ b/charts/mutationsgatekeepersh-assignmetadata-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/mutationsgatekeepersh-assignmetadata-editor --version=v0.23.0 -$ helm upgrade -i mutationsgatekeepersh-assignmetadata-editor appscode/mutationsgatekeepersh-assignmetadata-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/mutationsgatekeepersh-assignmetadata-editor --version=v0.24.0 +$ helm upgrade -i mutationsgatekeepersh-assignmetadata-editor appscode/mutationsgatekeepersh-assignmetadata-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AssignMetadata Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `mutationsgatekeepersh-assignmetadata-editor`: ```bash -$ helm upgrade -i mutationsgatekeepersh-assignmetadata-editor appscode/mutationsgatekeepersh-assignmetadata-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i mutationsgatekeepersh-assignmetadata-editor appscode/mutationsgatekeepersh-assignmetadata-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AssignMetadata Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `mutationsgatekeepe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i mutationsgatekeepersh-assignmetadata-editor appscode/mutationsgatekeepersh-assignmetadata-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=mutations.gatekeeper.sh/v1 +$ helm upgrade -i mutationsgatekeepersh-assignmetadata-editor appscode/mutationsgatekeepersh-assignmetadata-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=mutations.gatekeeper.sh/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i mutationsgatekeepersh-assignmetadata-editor appscode/mutationsgatekeepersh-assignmetadata-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i mutationsgatekeepersh-assignmetadata-editor appscode/mutationsgatekeepersh-assignmetadata-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/mutationsgatekeepersh-modifyset-editor/Chart.yaml b/charts/mutationsgatekeepersh-modifyset-editor/Chart.yaml index b60ecaa693..524a478dba 100644 --- a/charts/mutationsgatekeepersh-modifyset-editor/Chart.yaml +++ b/charts/mutationsgatekeepersh-modifyset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"mutations.gatekeeper.sh","version":"v1","resource":"modifyset"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ModifySet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: mutationsgatekeepersh-modifyset-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/mutationsgatekeepersh-modifyset-editor/README.md b/charts/mutationsgatekeepersh-modifyset-editor/README.md index e96ecdf2a7..eeddef4840 100644 --- a/charts/mutationsgatekeepersh-modifyset-editor/README.md +++ b/charts/mutationsgatekeepersh-modifyset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/mutationsgatekeepersh-modifyset-editor --version=v0.23.0 -$ helm upgrade -i mutationsgatekeepersh-modifyset-editor appscode/mutationsgatekeepersh-modifyset-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/mutationsgatekeepersh-modifyset-editor --version=v0.24.0 +$ helm upgrade -i mutationsgatekeepersh-modifyset-editor appscode/mutationsgatekeepersh-modifyset-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ModifySet Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `mutationsgatekeepersh-modifyset-editor`: ```bash -$ helm upgrade -i mutationsgatekeepersh-modifyset-editor appscode/mutationsgatekeepersh-modifyset-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i mutationsgatekeepersh-modifyset-editor appscode/mutationsgatekeepersh-modifyset-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ModifySet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `mutationsgatekeepe Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i mutationsgatekeepersh-modifyset-editor appscode/mutationsgatekeepersh-modifyset-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=mutations.gatekeeper.sh/v1 +$ helm upgrade -i mutationsgatekeepersh-modifyset-editor appscode/mutationsgatekeepersh-modifyset-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=mutations.gatekeeper.sh/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i mutationsgatekeepersh-modifyset-editor appscode/mutationsgatekeepersh-modifyset-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i mutationsgatekeepersh-modifyset-editor appscode/mutationsgatekeepersh-modifyset-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-privatednszone-editor/Chart.yaml b/charts/networkazurekubedbcom-privatednszone-editor/Chart.yaml index e53bb3cda1..c396940a7b 100644 --- a/charts/networkazurekubedbcom-privatednszone-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-privatednszone-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"privatednszones"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PrivateDNSZone Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-privatednszone-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/networkazurekubedbcom-privatednszone-editor/README.md b/charts/networkazurekubedbcom-privatednszone-editor/README.md index ac8967f4ca..e1d095d6c2 100644 --- a/charts/networkazurekubedbcom-privatednszone-editor/README.md +++ b/charts/networkazurekubedbcom-privatednszone-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-privatednszone-editor --version=v0.23.0 -$ helm upgrade -i networkazurekubedbcom-privatednszone-editor appscode/networkazurekubedbcom-privatednszone-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/networkazurekubedbcom-privatednszone-editor --version=v0.24.0 +$ helm upgrade -i networkazurekubedbcom-privatednszone-editor appscode/networkazurekubedbcom-privatednszone-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PrivateDNSZone Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `networkazurekubedbcom-privatednszone-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-privatednszone-editor appscode/networkazurekubedbcom-privatednszone-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i networkazurekubedbcom-privatednszone-editor appscode/networkazurekubedbcom-privatednszone-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PrivateDNSZone Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-privatednszone-editor appscode/networkazurekubedbcom-privatednszone-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-privatednszone-editor appscode/networkazurekubedbcom-privatednszone-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-privatednszone-editor appscode/networkazurekubedbcom-privatednszone-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-privatednszone-editor appscode/networkazurekubedbcom-privatednszone-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-privatednszonevirtualnetworklink-editor/Chart.yaml b/charts/networkazurekubedbcom-privatednszonevirtualnetworklink-editor/Chart.yaml index c09f06dc0d..9b0eaf283e 100644 --- a/charts/networkazurekubedbcom-privatednszonevirtualnetworklink-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-privatednszonevirtualnetworklink-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"privatednszonevirtualnetworklinks"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PrivateDNSZoneVirtualNetworkLink Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-privatednszonevirtualnetworklink-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/networkazurekubedbcom-privatednszonevirtualnetworklink-editor/README.md b/charts/networkazurekubedbcom-privatednszonevirtualnetworklink-editor/README.md index 3070472d2f..d08b9a770b 100644 --- a/charts/networkazurekubedbcom-privatednszonevirtualnetworklink-editor/README.md +++ b/charts/networkazurekubedbcom-privatednszonevirtualnetworklink-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor --version=v0.23.0 -$ helm upgrade -i networkazurekubedbcom-privatednszonevirtualnetworklink-editor appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor --version=v0.24.0 +$ helm upgrade -i networkazurekubedbcom-privatednszonevirtualnetworklink-editor appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PrivateDNSZoneVirtualNetworkLink Editor on a [Kubernetes](h To install/upgrade the chart with the release name `networkazurekubedbcom-privatednszonevirtualnetworklink-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-privatednszonevirtualnetworklink-editor appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i networkazurekubedbcom-privatednszonevirtualnetworklink-editor appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PrivateDNSZoneVirtualNetworkLink Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-privatednszonevirtualnetworklink-editor appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-privatednszonevirtualnetworklink-editor appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-privatednszonevirtualnetworklink-editor appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-privatednszonevirtualnetworklink-editor appscode/networkazurekubedbcom-privatednszonevirtualnetworklink-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-routetable-editor/Chart.yaml b/charts/networkazurekubedbcom-routetable-editor/Chart.yaml index c8b40b6596..773874156f 100644 --- a/charts/networkazurekubedbcom-routetable-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-routetable-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"routetables"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RouteTable Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-routetable-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/networkazurekubedbcom-routetable-editor/README.md b/charts/networkazurekubedbcom-routetable-editor/README.md index 733974426f..350410a7d6 100644 --- a/charts/networkazurekubedbcom-routetable-editor/README.md +++ b/charts/networkazurekubedbcom-routetable-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-routetable-editor --version=v0.23.0 -$ helm upgrade -i networkazurekubedbcom-routetable-editor appscode/networkazurekubedbcom-routetable-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/networkazurekubedbcom-routetable-editor --version=v0.24.0 +$ helm upgrade -i networkazurekubedbcom-routetable-editor appscode/networkazurekubedbcom-routetable-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RouteTable Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `networkazurekubedbcom-routetable-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-routetable-editor appscode/networkazurekubedbcom-routetable-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i networkazurekubedbcom-routetable-editor appscode/networkazurekubedbcom-routetable-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RouteTable Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-routetable-editor appscode/networkazurekubedbcom-routetable-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-routetable-editor appscode/networkazurekubedbcom-routetable-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-routetable-editor appscode/networkazurekubedbcom-routetable-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-routetable-editor appscode/networkazurekubedbcom-routetable-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-securitygroup-editor/Chart.yaml b/charts/networkazurekubedbcom-securitygroup-editor/Chart.yaml index bbab4c7535..b15376e2db 100644 --- a/charts/networkazurekubedbcom-securitygroup-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-securitygroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"securitygroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SecurityGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-securitygroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/networkazurekubedbcom-securitygroup-editor/README.md b/charts/networkazurekubedbcom-securitygroup-editor/README.md index cea7ad692c..92d016d27a 100644 --- a/charts/networkazurekubedbcom-securitygroup-editor/README.md +++ b/charts/networkazurekubedbcom-securitygroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-securitygroup-editor --version=v0.23.0 -$ helm upgrade -i networkazurekubedbcom-securitygroup-editor appscode/networkazurekubedbcom-securitygroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/networkazurekubedbcom-securitygroup-editor --version=v0.24.0 +$ helm upgrade -i networkazurekubedbcom-securitygroup-editor appscode/networkazurekubedbcom-securitygroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecurityGroup Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `networkazurekubedbcom-securitygroup-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-securitygroup-editor appscode/networkazurekubedbcom-securitygroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i networkazurekubedbcom-securitygroup-editor appscode/networkazurekubedbcom-securitygroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SecurityGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-securitygroup-editor appscode/networkazurekubedbcom-securitygroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-securitygroup-editor appscode/networkazurekubedbcom-securitygroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-securitygroup-editor appscode/networkazurekubedbcom-securitygroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-securitygroup-editor appscode/networkazurekubedbcom-securitygroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-subnet-editor/Chart.yaml b/charts/networkazurekubedbcom-subnet-editor/Chart.yaml index f7edb51c07..5f3cf59cf1 100644 --- a/charts/networkazurekubedbcom-subnet-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-subnet-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"subnets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Subnet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-subnet-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/networkazurekubedbcom-subnet-editor/README.md b/charts/networkazurekubedbcom-subnet-editor/README.md index f30b489f33..91aeb8eb03 100644 --- a/charts/networkazurekubedbcom-subnet-editor/README.md +++ b/charts/networkazurekubedbcom-subnet-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-subnet-editor --version=v0.23.0 -$ helm upgrade -i networkazurekubedbcom-subnet-editor appscode/networkazurekubedbcom-subnet-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/networkazurekubedbcom-subnet-editor --version=v0.24.0 +$ helm upgrade -i networkazurekubedbcom-subnet-editor appscode/networkazurekubedbcom-subnet-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Subnet Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `networkazurekubedbcom-subnet-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-subnet-editor appscode/networkazurekubedbcom-subnet-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i networkazurekubedbcom-subnet-editor appscode/networkazurekubedbcom-subnet-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Subnet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-subnet-editor appscode/networkazurekubedbcom-subnet-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-subnet-editor appscode/networkazurekubedbcom-subnet-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-subnet-editor appscode/networkazurekubedbcom-subnet-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-subnet-editor appscode/networkazurekubedbcom-subnet-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor/Chart.yaml b/charts/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor/Chart.yaml index 357e905e1b..11a9e9aa3c 100644 --- a/charts/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"subnetnetworksecuritygroupassociations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SubnetNetworkSecurityGroupAssociation Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor/README.md b/charts/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor/README.md index ae6f20ee38..6bc458bacb 100644 --- a/charts/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor/README.md +++ b/charts/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor --version=v0.23.0 -$ helm upgrade -i networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor --version=v0.24.0 +$ helm upgrade -i networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SubnetNetworkSecurityGroupAssociation Editor on a [Kubernet To install/upgrade the chart with the release name `networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SubnetNetworkSecurityGroupAssociation Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor appscode/networkazurekubedbcom-subnetnetworksecuritygroupassociation-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-subnetroutetableassociation-editor/Chart.yaml b/charts/networkazurekubedbcom-subnetroutetableassociation-editor/Chart.yaml index 4834cc9e31..f60226f57e 100644 --- a/charts/networkazurekubedbcom-subnetroutetableassociation-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-subnetroutetableassociation-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"subnetroutetableassociations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SubnetRouteTableAssociation Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-subnetroutetableassociation-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/networkazurekubedbcom-subnetroutetableassociation-editor/README.md b/charts/networkazurekubedbcom-subnetroutetableassociation-editor/README.md index 0fd060239d..f1cb52f24e 100644 --- a/charts/networkazurekubedbcom-subnetroutetableassociation-editor/README.md +++ b/charts/networkazurekubedbcom-subnetroutetableassociation-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-subnetroutetableassociation-editor --version=v0.23.0 -$ helm upgrade -i networkazurekubedbcom-subnetroutetableassociation-editor appscode/networkazurekubedbcom-subnetroutetableassociation-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/networkazurekubedbcom-subnetroutetableassociation-editor --version=v0.24.0 +$ helm upgrade -i networkazurekubedbcom-subnetroutetableassociation-editor appscode/networkazurekubedbcom-subnetroutetableassociation-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SubnetRouteTableAssociation Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `networkazurekubedbcom-subnetroutetableassociation-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-subnetroutetableassociation-editor appscode/networkazurekubedbcom-subnetroutetableassociation-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i networkazurekubedbcom-subnetroutetableassociation-editor appscode/networkazurekubedbcom-subnetroutetableassociation-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SubnetRouteTableAssociation Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-subnetroutetableassociation-editor appscode/networkazurekubedbcom-subnetroutetableassociation-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-subnetroutetableassociation-editor appscode/networkazurekubedbcom-subnetroutetableassociation-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-subnetroutetableassociation-editor appscode/networkazurekubedbcom-subnetroutetableassociation-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-subnetroutetableassociation-editor appscode/networkazurekubedbcom-subnetroutetableassociation-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-virtualnetwork-editor/Chart.yaml b/charts/networkazurekubedbcom-virtualnetwork-editor/Chart.yaml index 56d926c900..9b9991452d 100644 --- a/charts/networkazurekubedbcom-virtualnetwork-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-virtualnetwork-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"virtualnetworks"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VirtualNetwork Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-virtualnetwork-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/networkazurekubedbcom-virtualnetwork-editor/README.md b/charts/networkazurekubedbcom-virtualnetwork-editor/README.md index ec3da43c5a..295dffd0de 100644 --- a/charts/networkazurekubedbcom-virtualnetwork-editor/README.md +++ b/charts/networkazurekubedbcom-virtualnetwork-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-virtualnetwork-editor --version=v0.23.0 -$ helm upgrade -i networkazurekubedbcom-virtualnetwork-editor appscode/networkazurekubedbcom-virtualnetwork-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/networkazurekubedbcom-virtualnetwork-editor --version=v0.24.0 +$ helm upgrade -i networkazurekubedbcom-virtualnetwork-editor appscode/networkazurekubedbcom-virtualnetwork-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VirtualNetwork Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `networkazurekubedbcom-virtualnetwork-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-virtualnetwork-editor appscode/networkazurekubedbcom-virtualnetwork-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i networkazurekubedbcom-virtualnetwork-editor appscode/networkazurekubedbcom-virtualnetwork-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VirtualNetwork Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-virtualnetwork-editor appscode/networkazurekubedbcom-virtualnetwork-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-virtualnetwork-editor appscode/networkazurekubedbcom-virtualnetwork-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-virtualnetwork-editor appscode/networkazurekubedbcom-virtualnetwork-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-virtualnetwork-editor appscode/networkazurekubedbcom-virtualnetwork-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/networkazurekubedbcom-virtualnetworkpeering-editor/Chart.yaml b/charts/networkazurekubedbcom-virtualnetworkpeering-editor/Chart.yaml index 48bc92bc81..4e26e9dd88 100644 --- a/charts/networkazurekubedbcom-virtualnetworkpeering-editor/Chart.yaml +++ b/charts/networkazurekubedbcom-virtualnetworkpeering-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"network.azure.kubedb.com","version":"v1alpha1","resource":"virtualnetworkpeerings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VirtualNetworkPeering Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkazurekubedbcom-virtualnetworkpeering-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/networkazurekubedbcom-virtualnetworkpeering-editor/README.md b/charts/networkazurekubedbcom-virtualnetworkpeering-editor/README.md index a1068f3bc1..62f8390cae 100644 --- a/charts/networkazurekubedbcom-virtualnetworkpeering-editor/README.md +++ b/charts/networkazurekubedbcom-virtualnetworkpeering-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkazurekubedbcom-virtualnetworkpeering-editor --version=v0.23.0 -$ helm upgrade -i networkazurekubedbcom-virtualnetworkpeering-editor appscode/networkazurekubedbcom-virtualnetworkpeering-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/networkazurekubedbcom-virtualnetworkpeering-editor --version=v0.24.0 +$ helm upgrade -i networkazurekubedbcom-virtualnetworkpeering-editor appscode/networkazurekubedbcom-virtualnetworkpeering-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VirtualNetworkPeering Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `networkazurekubedbcom-virtualnetworkpeering-editor`: ```bash -$ helm upgrade -i networkazurekubedbcom-virtualnetworkpeering-editor appscode/networkazurekubedbcom-virtualnetworkpeering-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i networkazurekubedbcom-virtualnetworkpeering-editor appscode/networkazurekubedbcom-virtualnetworkpeering-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VirtualNetworkPeering Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-virtualnetworkpeering-editor appscode/networkazurekubedbcom-virtualnetworkpeering-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 +$ helm upgrade -i networkazurekubedbcom-virtualnetworkpeering-editor appscode/networkazurekubedbcom-virtualnetworkpeering-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=network.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkazurekubedbcom-virtualnetworkpeering-editor appscode/networkazurekubedbcom-virtualnetworkpeering-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i networkazurekubedbcom-virtualnetworkpeering-editor appscode/networkazurekubedbcom-virtualnetworkpeering-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/networkingk8sio-ingress-editor/Chart.yaml b/charts/networkingk8sio-ingress-editor/Chart.yaml index 27fa67c2db..4975d8d486 100644 --- a/charts/networkingk8sio-ingress-editor/Chart.yaml +++ b/charts/networkingk8sio-ingress-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"networking.k8s.io","version":"v1","resource":"ingresses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Ingress Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkingk8sio-ingress-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/networkingk8sio-ingress-editor/README.md b/charts/networkingk8sio-ingress-editor/README.md index 0526b79c94..70ab623b7b 100644 --- a/charts/networkingk8sio-ingress-editor/README.md +++ b/charts/networkingk8sio-ingress-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkingk8sio-ingress-editor --version=v0.23.0 -$ helm upgrade -i networkingk8sio-ingress-editor appscode/networkingk8sio-ingress-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/networkingk8sio-ingress-editor --version=v0.24.0 +$ helm upgrade -i networkingk8sio-ingress-editor appscode/networkingk8sio-ingress-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Ingress Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `networkingk8sio-ingress-editor`: ```bash -$ helm upgrade -i networkingk8sio-ingress-editor appscode/networkingk8sio-ingress-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i networkingk8sio-ingress-editor appscode/networkingk8sio-ingress-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Ingress Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkingk8sio-in Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkingk8sio-ingress-editor appscode/networkingk8sio-ingress-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=networking.k8s.io/v1 +$ helm upgrade -i networkingk8sio-ingress-editor appscode/networkingk8sio-ingress-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=networking.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkingk8sio-ingress-editor appscode/networkingk8sio-ingress-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i networkingk8sio-ingress-editor appscode/networkingk8sio-ingress-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/networkingk8sio-ingressclass-editor/Chart.yaml b/charts/networkingk8sio-ingressclass-editor/Chart.yaml index 2385567cb7..1bbc874fef 100644 --- a/charts/networkingk8sio-ingressclass-editor/Chart.yaml +++ b/charts/networkingk8sio-ingressclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"networking.k8s.io","version":"v1","resource":"ingressclasses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: IngressClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkingk8sio-ingressclass-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/networkingk8sio-ingressclass-editor/README.md b/charts/networkingk8sio-ingressclass-editor/README.md index 1cc001a1f8..c17232843f 100644 --- a/charts/networkingk8sio-ingressclass-editor/README.md +++ b/charts/networkingk8sio-ingressclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkingk8sio-ingressclass-editor --version=v0.23.0 -$ helm upgrade -i networkingk8sio-ingressclass-editor appscode/networkingk8sio-ingressclass-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/networkingk8sio-ingressclass-editor --version=v0.24.0 +$ helm upgrade -i networkingk8sio-ingressclass-editor appscode/networkingk8sio-ingressclass-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a IngressClass Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `networkingk8sio-ingressclass-editor`: ```bash -$ helm upgrade -i networkingk8sio-ingressclass-editor appscode/networkingk8sio-ingressclass-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i networkingk8sio-ingressclass-editor appscode/networkingk8sio-ingressclass-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a IngressClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkingk8sio-in Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkingk8sio-ingressclass-editor appscode/networkingk8sio-ingressclass-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=networking.k8s.io/v1 +$ helm upgrade -i networkingk8sio-ingressclass-editor appscode/networkingk8sio-ingressclass-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=networking.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkingk8sio-ingressclass-editor appscode/networkingk8sio-ingressclass-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i networkingk8sio-ingressclass-editor appscode/networkingk8sio-ingressclass-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/networkingk8sio-networkpolicy-editor/Chart.yaml b/charts/networkingk8sio-networkpolicy-editor/Chart.yaml index c400873760..101d3f92b5 100644 --- a/charts/networkingk8sio-networkpolicy-editor/Chart.yaml +++ b/charts/networkingk8sio-networkpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"networking.k8s.io","version":"v1","resource":"networkpolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: NetworkPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: networkingk8sio-networkpolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/networkingk8sio-networkpolicy-editor/README.md b/charts/networkingk8sio-networkpolicy-editor/README.md index 2007148b21..9388666b74 100644 --- a/charts/networkingk8sio-networkpolicy-editor/README.md +++ b/charts/networkingk8sio-networkpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/networkingk8sio-networkpolicy-editor --version=v0.23.0 -$ helm upgrade -i networkingk8sio-networkpolicy-editor appscode/networkingk8sio-networkpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/networkingk8sio-networkpolicy-editor --version=v0.24.0 +$ helm upgrade -i networkingk8sio-networkpolicy-editor appscode/networkingk8sio-networkpolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a NetworkPolicy Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `networkingk8sio-networkpolicy-editor`: ```bash -$ helm upgrade -i networkingk8sio-networkpolicy-editor appscode/networkingk8sio-networkpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i networkingk8sio-networkpolicy-editor appscode/networkingk8sio-networkpolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a NetworkPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `networkingk8sio-ne Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i networkingk8sio-networkpolicy-editor appscode/networkingk8sio-networkpolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=networking.k8s.io/v1 +$ helm upgrade -i networkingk8sio-networkpolicy-editor appscode/networkingk8sio-networkpolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=networking.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i networkingk8sio-networkpolicy-editor appscode/networkingk8sio-networkpolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i networkingk8sio-networkpolicy-editor appscode/networkingk8sio-networkpolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/nodek8sappscodecom-nodetopology-editor/Chart.yaml b/charts/nodek8sappscodecom-nodetopology-editor/Chart.yaml index a9eea89566..cd63f14e9f 100644 --- a/charts/nodek8sappscodecom-nodetopology-editor/Chart.yaml +++ b/charts/nodek8sappscodecom-nodetopology-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"node.k8s.appscode.com","version":"v1alpha1","resource":"nodetopologies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: NodeTopology Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: nodek8sappscodecom-nodetopology-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/nodek8sappscodecom-nodetopology-editor/README.md b/charts/nodek8sappscodecom-nodetopology-editor/README.md index ca5de36d1a..fc318f14a1 100644 --- a/charts/nodek8sappscodecom-nodetopology-editor/README.md +++ b/charts/nodek8sappscodecom-nodetopology-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/nodek8sappscodecom-nodetopology-editor --version=v0.23.0 -$ helm upgrade -i nodek8sappscodecom-nodetopology-editor appscode/nodek8sappscodecom-nodetopology-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/nodek8sappscodecom-nodetopology-editor --version=v0.24.0 +$ helm upgrade -i nodek8sappscodecom-nodetopology-editor appscode/nodek8sappscodecom-nodetopology-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a NodeTopology Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `nodek8sappscodecom-nodetopology-editor`: ```bash -$ helm upgrade -i nodek8sappscodecom-nodetopology-editor appscode/nodek8sappscodecom-nodetopology-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i nodek8sappscodecom-nodetopology-editor appscode/nodek8sappscodecom-nodetopology-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a NodeTopology Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `nodek8sappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i nodek8sappscodecom-nodetopology-editor appscode/nodek8sappscodecom-nodetopology-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=node.k8s.appscode.com/v1alpha1 +$ helm upgrade -i nodek8sappscodecom-nodetopology-editor appscode/nodek8sappscodecom-nodetopology-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=node.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i nodek8sappscodecom-nodetopology-editor appscode/nodek8sappscodecom-nodetopology-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i nodek8sappscodecom-nodetopology-editor appscode/nodek8sappscodecom-nodetopology-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/nodek8sio-runtimeclass-editor/Chart.yaml b/charts/nodek8sio-runtimeclass-editor/Chart.yaml index 748d3ac4e7..ce8da25f89 100644 --- a/charts/nodek8sio-runtimeclass-editor/Chart.yaml +++ b/charts/nodek8sio-runtimeclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"node.k8s.io","version":"v1","resource":"runtimeclasses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RuntimeClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: nodek8sio-runtimeclass-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/nodek8sio-runtimeclass-editor/README.md b/charts/nodek8sio-runtimeclass-editor/README.md index 8b8925e3c7..0522e20e29 100644 --- a/charts/nodek8sio-runtimeclass-editor/README.md +++ b/charts/nodek8sio-runtimeclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/nodek8sio-runtimeclass-editor --version=v0.23.0 -$ helm upgrade -i nodek8sio-runtimeclass-editor appscode/nodek8sio-runtimeclass-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/nodek8sio-runtimeclass-editor --version=v0.24.0 +$ helm upgrade -i nodek8sio-runtimeclass-editor appscode/nodek8sio-runtimeclass-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RuntimeClass Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `nodek8sio-runtimeclass-editor`: ```bash -$ helm upgrade -i nodek8sio-runtimeclass-editor appscode/nodek8sio-runtimeclass-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i nodek8sio-runtimeclass-editor appscode/nodek8sio-runtimeclass-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RuntimeClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `nodek8sio-runtimec Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i nodek8sio-runtimeclass-editor appscode/nodek8sio-runtimeclass-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=node.k8s.io/v1 +$ helm upgrade -i nodek8sio-runtimeclass-editor appscode/nodek8sio-runtimeclass-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=node.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i nodek8sio-runtimeclass-editor appscode/nodek8sio-runtimeclass-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i nodek8sio-runtimeclass-editor appscode/nodek8sio-runtimeclass-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/notificationtoolkitfluxcdio-alert-editor/Chart.yaml b/charts/notificationtoolkitfluxcdio-alert-editor/Chart.yaml index 7cebe23bb3..405680ba9c 100644 --- a/charts/notificationtoolkitfluxcdio-alert-editor/Chart.yaml +++ b/charts/notificationtoolkitfluxcdio-alert-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"notification.toolkit.fluxcd.io","version":"v1beta3","resource":"alerts"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Alert Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: notificationtoolkitfluxcdio-alert-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/notificationtoolkitfluxcdio-alert-editor/README.md b/charts/notificationtoolkitfluxcdio-alert-editor/README.md index 0121c77722..e6356782e7 100644 --- a/charts/notificationtoolkitfluxcdio-alert-editor/README.md +++ b/charts/notificationtoolkitfluxcdio-alert-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/notificationtoolkitfluxcdio-alert-editor --version=v0.23.0 -$ helm upgrade -i notificationtoolkitfluxcdio-alert-editor appscode/notificationtoolkitfluxcdio-alert-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/notificationtoolkitfluxcdio-alert-editor --version=v0.24.0 +$ helm upgrade -i notificationtoolkitfluxcdio-alert-editor appscode/notificationtoolkitfluxcdio-alert-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Alert Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `notificationtoolkitfluxcdio-alert-editor`: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-alert-editor appscode/notificationtoolkitfluxcdio-alert-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i notificationtoolkitfluxcdio-alert-editor appscode/notificationtoolkitfluxcdio-alert-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Alert Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `notificationtoolki Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-alert-editor appscode/notificationtoolkitfluxcdio-alert-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=notification.toolkit.fluxcd.io/v1beta3 +$ helm upgrade -i notificationtoolkitfluxcdio-alert-editor appscode/notificationtoolkitfluxcdio-alert-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=notification.toolkit.fluxcd.io/v1beta3 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-alert-editor appscode/notificationtoolkitfluxcdio-alert-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i notificationtoolkitfluxcdio-alert-editor appscode/notificationtoolkitfluxcdio-alert-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/notificationtoolkitfluxcdio-provider-editor/Chart.yaml b/charts/notificationtoolkitfluxcdio-provider-editor/Chart.yaml index 336b59bd75..f07fa938c6 100644 --- a/charts/notificationtoolkitfluxcdio-provider-editor/Chart.yaml +++ b/charts/notificationtoolkitfluxcdio-provider-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"notification.toolkit.fluxcd.io","version":"v1beta3","resource":"providers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Provider Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: notificationtoolkitfluxcdio-provider-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/notificationtoolkitfluxcdio-provider-editor/README.md b/charts/notificationtoolkitfluxcdio-provider-editor/README.md index f085b70775..a0a4c3819d 100644 --- a/charts/notificationtoolkitfluxcdio-provider-editor/README.md +++ b/charts/notificationtoolkitfluxcdio-provider-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/notificationtoolkitfluxcdio-provider-editor --version=v0.23.0 -$ helm upgrade -i notificationtoolkitfluxcdio-provider-editor appscode/notificationtoolkitfluxcdio-provider-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/notificationtoolkitfluxcdio-provider-editor --version=v0.24.0 +$ helm upgrade -i notificationtoolkitfluxcdio-provider-editor appscode/notificationtoolkitfluxcdio-provider-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Provider Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `notificationtoolkitfluxcdio-provider-editor`: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-provider-editor appscode/notificationtoolkitfluxcdio-provider-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i notificationtoolkitfluxcdio-provider-editor appscode/notificationtoolkitfluxcdio-provider-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Provider Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `notificationtoolki Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-provider-editor appscode/notificationtoolkitfluxcdio-provider-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=notification.toolkit.fluxcd.io/v1beta3 +$ helm upgrade -i notificationtoolkitfluxcdio-provider-editor appscode/notificationtoolkitfluxcdio-provider-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=notification.toolkit.fluxcd.io/v1beta3 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-provider-editor appscode/notificationtoolkitfluxcdio-provider-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i notificationtoolkitfluxcdio-provider-editor appscode/notificationtoolkitfluxcdio-provider-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/notificationtoolkitfluxcdio-receiver-editor/Chart.yaml b/charts/notificationtoolkitfluxcdio-receiver-editor/Chart.yaml index e36dda8711..2b4c9b5c3b 100644 --- a/charts/notificationtoolkitfluxcdio-receiver-editor/Chart.yaml +++ b/charts/notificationtoolkitfluxcdio-receiver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"notification.toolkit.fluxcd.io","version":"v1","resource":"receivers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Receiver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: notificationtoolkitfluxcdio-receiver-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/notificationtoolkitfluxcdio-receiver-editor/README.md b/charts/notificationtoolkitfluxcdio-receiver-editor/README.md index 86dfddda1f..f44c1f1770 100644 --- a/charts/notificationtoolkitfluxcdio-receiver-editor/README.md +++ b/charts/notificationtoolkitfluxcdio-receiver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/notificationtoolkitfluxcdio-receiver-editor --version=v0.23.0 -$ helm upgrade -i notificationtoolkitfluxcdio-receiver-editor appscode/notificationtoolkitfluxcdio-receiver-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/notificationtoolkitfluxcdio-receiver-editor --version=v0.24.0 +$ helm upgrade -i notificationtoolkitfluxcdio-receiver-editor appscode/notificationtoolkitfluxcdio-receiver-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Receiver Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `notificationtoolkitfluxcdio-receiver-editor`: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-receiver-editor appscode/notificationtoolkitfluxcdio-receiver-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i notificationtoolkitfluxcdio-receiver-editor appscode/notificationtoolkitfluxcdio-receiver-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Receiver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `notificationtoolki Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-receiver-editor appscode/notificationtoolkitfluxcdio-receiver-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=notification.toolkit.fluxcd.io/v1 +$ helm upgrade -i notificationtoolkitfluxcdio-receiver-editor appscode/notificationtoolkitfluxcdio-receiver-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=notification.toolkit.fluxcd.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i notificationtoolkitfluxcdio-receiver-editor appscode/notificationtoolkitfluxcdio-receiver-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i notificationtoolkitfluxcdio-receiver-editor appscode/notificationtoolkitfluxcdio-receiver-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/offlinelicensesappscodecom-offlinelicense-editor/Chart.yaml b/charts/offlinelicensesappscodecom-offlinelicense-editor/Chart.yaml index 1f72313eb6..65a24384b4 100644 --- a/charts/offlinelicensesappscodecom-offlinelicense-editor/Chart.yaml +++ b/charts/offlinelicensesappscodecom-offlinelicense-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"offline.licenses.appscode.com","version":"v1alpha1","resource":"offlinelicenses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: OfflineLicense Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: offlinelicensesappscodecom-offlinelicense-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/offlinelicensesappscodecom-offlinelicense-editor/README.md b/charts/offlinelicensesappscodecom-offlinelicense-editor/README.md index 831c596d83..c2b6c330e1 100644 --- a/charts/offlinelicensesappscodecom-offlinelicense-editor/README.md +++ b/charts/offlinelicensesappscodecom-offlinelicense-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/offlinelicensesappscodecom-offlinelicense-editor --version=v0.23.0 -$ helm upgrade -i offlinelicensesappscodecom-offlinelicense-editor appscode/offlinelicensesappscodecom-offlinelicense-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/offlinelicensesappscodecom-offlinelicense-editor --version=v0.24.0 +$ helm upgrade -i offlinelicensesappscodecom-offlinelicense-editor appscode/offlinelicensesappscodecom-offlinelicense-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a OfflineLicense Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `offlinelicensesappscodecom-offlinelicense-editor`: ```bash -$ helm upgrade -i offlinelicensesappscodecom-offlinelicense-editor appscode/offlinelicensesappscodecom-offlinelicense-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i offlinelicensesappscodecom-offlinelicense-editor appscode/offlinelicensesappscodecom-offlinelicense-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a OfflineLicense Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `offlinelicensesapp Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i offlinelicensesappscodecom-offlinelicense-editor appscode/offlinelicensesappscodecom-offlinelicense-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=offline.licenses.appscode.com/v1alpha1 +$ helm upgrade -i offlinelicensesappscodecom-offlinelicense-editor appscode/offlinelicensesappscodecom-offlinelicense-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=offline.licenses.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i offlinelicensesappscodecom-offlinelicense-editor appscode/offlinelicensesappscodecom-offlinelicense-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i offlinelicensesappscodecom-offlinelicense-editor appscode/offlinelicensesappscodecom-offlinelicense-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/openvizdev-grafanadashboard-editor/Chart.yaml b/charts/openvizdev-grafanadashboard-editor/Chart.yaml index e49b4cded0..29a808db28 100644 --- a/charts/openvizdev-grafanadashboard-editor/Chart.yaml +++ b/charts/openvizdev-grafanadashboard-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"openviz.dev","version":"v1alpha1","resource":"grafanadashboards"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GrafanaDashboard Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: openvizdev-grafanadashboard-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/openvizdev-grafanadashboard-editor/README.md b/charts/openvizdev-grafanadashboard-editor/README.md index 204384ff2e..91e9d34b46 100644 --- a/charts/openvizdev-grafanadashboard-editor/README.md +++ b/charts/openvizdev-grafanadashboard-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/openvizdev-grafanadashboard-editor --version=v0.23.0 -$ helm upgrade -i openvizdev-grafanadashboard-editor appscode/openvizdev-grafanadashboard-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/openvizdev-grafanadashboard-editor --version=v0.24.0 +$ helm upgrade -i openvizdev-grafanadashboard-editor appscode/openvizdev-grafanadashboard-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GrafanaDashboard Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `openvizdev-grafanadashboard-editor`: ```bash -$ helm upgrade -i openvizdev-grafanadashboard-editor appscode/openvizdev-grafanadashboard-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i openvizdev-grafanadashboard-editor appscode/openvizdev-grafanadashboard-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GrafanaDashboard Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `openvizdev-grafana Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i openvizdev-grafanadashboard-editor appscode/openvizdev-grafanadashboard-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=openviz.dev/v1alpha1 +$ helm upgrade -i openvizdev-grafanadashboard-editor appscode/openvizdev-grafanadashboard-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=openviz.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i openvizdev-grafanadashboard-editor appscode/openvizdev-grafanadashboard-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i openvizdev-grafanadashboard-editor appscode/openvizdev-grafanadashboard-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/openvizdev-grafanadashboardtemplate-editor/Chart.yaml b/charts/openvizdev-grafanadashboardtemplate-editor/Chart.yaml index 06a12e5ffa..8a1ff5dfed 100644 --- a/charts/openvizdev-grafanadashboardtemplate-editor/Chart.yaml +++ b/charts/openvizdev-grafanadashboardtemplate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"openviz.dev","version":"v1alpha1","resource":"grafanadashboardtemplates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GrafanaDashboardTemplate Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: openvizdev-grafanadashboardtemplate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/openvizdev-grafanadashboardtemplate-editor/README.md b/charts/openvizdev-grafanadashboardtemplate-editor/README.md index 10dff0957b..903e1a26c7 100644 --- a/charts/openvizdev-grafanadashboardtemplate-editor/README.md +++ b/charts/openvizdev-grafanadashboardtemplate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/openvizdev-grafanadashboardtemplate-editor --version=v0.23.0 -$ helm upgrade -i openvizdev-grafanadashboardtemplate-editor appscode/openvizdev-grafanadashboardtemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/openvizdev-grafanadashboardtemplate-editor --version=v0.24.0 +$ helm upgrade -i openvizdev-grafanadashboardtemplate-editor appscode/openvizdev-grafanadashboardtemplate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GrafanaDashboardTemplate Editor on a [Kubernetes](http://ku To install/upgrade the chart with the release name `openvizdev-grafanadashboardtemplate-editor`: ```bash -$ helm upgrade -i openvizdev-grafanadashboardtemplate-editor appscode/openvizdev-grafanadashboardtemplate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i openvizdev-grafanadashboardtemplate-editor appscode/openvizdev-grafanadashboardtemplate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GrafanaDashboardTemplate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `openvizdev-grafana Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i openvizdev-grafanadashboardtemplate-editor appscode/openvizdev-grafanadashboardtemplate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=openviz.dev/v1alpha1 +$ helm upgrade -i openvizdev-grafanadashboardtemplate-editor appscode/openvizdev-grafanadashboardtemplate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=openviz.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i openvizdev-grafanadashboardtemplate-editor appscode/openvizdev-grafanadashboardtemplate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i openvizdev-grafanadashboardtemplate-editor appscode/openvizdev-grafanadashboardtemplate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/openvizdev-grafanadatasource-editor/Chart.yaml b/charts/openvizdev-grafanadatasource-editor/Chart.yaml index 9cabf4454e..6c3ca8f7d4 100644 --- a/charts/openvizdev-grafanadatasource-editor/Chart.yaml +++ b/charts/openvizdev-grafanadatasource-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"openviz.dev","version":"v1alpha1","resource":"grafanadatasources"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GrafanaDatasource Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: openvizdev-grafanadatasource-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/openvizdev-grafanadatasource-editor/README.md b/charts/openvizdev-grafanadatasource-editor/README.md index 1559e6d91e..957b3dc318 100644 --- a/charts/openvizdev-grafanadatasource-editor/README.md +++ b/charts/openvizdev-grafanadatasource-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/openvizdev-grafanadatasource-editor --version=v0.23.0 -$ helm upgrade -i openvizdev-grafanadatasource-editor appscode/openvizdev-grafanadatasource-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/openvizdev-grafanadatasource-editor --version=v0.24.0 +$ helm upgrade -i openvizdev-grafanadatasource-editor appscode/openvizdev-grafanadatasource-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GrafanaDatasource Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `openvizdev-grafanadatasource-editor`: ```bash -$ helm upgrade -i openvizdev-grafanadatasource-editor appscode/openvizdev-grafanadatasource-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i openvizdev-grafanadatasource-editor appscode/openvizdev-grafanadatasource-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GrafanaDatasource Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `openvizdev-grafana Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i openvizdev-grafanadatasource-editor appscode/openvizdev-grafanadatasource-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=openviz.dev/v1alpha1 +$ helm upgrade -i openvizdev-grafanadatasource-editor appscode/openvizdev-grafanadatasource-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=openviz.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i openvizdev-grafanadatasource-editor appscode/openvizdev-grafanadatasource-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i openvizdev-grafanadatasource-editor appscode/openvizdev-grafanadatasource-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/operatoropenclustermanagementio-clustermanager-editor/Chart.yaml b/charts/operatoropenclustermanagementio-clustermanager-editor/Chart.yaml index 2916f8320d..16f361e809 100644 --- a/charts/operatoropenclustermanagementio-clustermanager-editor/Chart.yaml +++ b/charts/operatoropenclustermanagementio-clustermanager-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"operator.open-cluster-management.io","version":"v1","resource":"clustermanagers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterManager Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: operatoropenclustermanagementio-clustermanager-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/operatoropenclustermanagementio-clustermanager-editor/README.md b/charts/operatoropenclustermanagementio-clustermanager-editor/README.md index 2ebc740de0..ff7df464d6 100644 --- a/charts/operatoropenclustermanagementio-clustermanager-editor/README.md +++ b/charts/operatoropenclustermanagementio-clustermanager-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/operatoropenclustermanagementio-clustermanager-editor --version=v0.23.0 -$ helm upgrade -i operatoropenclustermanagementio-clustermanager-editor appscode/operatoropenclustermanagementio-clustermanager-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/operatoropenclustermanagementio-clustermanager-editor --version=v0.24.0 +$ helm upgrade -i operatoropenclustermanagementio-clustermanager-editor appscode/operatoropenclustermanagementio-clustermanager-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterManager Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `operatoropenclustermanagementio-clustermanager-editor`: ```bash -$ helm upgrade -i operatoropenclustermanagementio-clustermanager-editor appscode/operatoropenclustermanagementio-clustermanager-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i operatoropenclustermanagementio-clustermanager-editor appscode/operatoropenclustermanagementio-clustermanager-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterManager Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `operatoropencluste Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i operatoropenclustermanagementio-clustermanager-editor appscode/operatoropenclustermanagementio-clustermanager-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=operator.open-cluster-management.io/v1 +$ helm upgrade -i operatoropenclustermanagementio-clustermanager-editor appscode/operatoropenclustermanagementio-clustermanager-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=operator.open-cluster-management.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i operatoropenclustermanagementio-clustermanager-editor appscode/operatoropenclustermanagementio-clustermanager-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i operatoropenclustermanagementio-clustermanager-editor appscode/operatoropenclustermanagementio-clustermanager-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/operatoropenclustermanagementio-klusterlet-editor/Chart.yaml b/charts/operatoropenclustermanagementio-klusterlet-editor/Chart.yaml index e713be2939..62b87dcd64 100644 --- a/charts/operatoropenclustermanagementio-klusterlet-editor/Chart.yaml +++ b/charts/operatoropenclustermanagementio-klusterlet-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"operator.open-cluster-management.io","version":"v1","resource":"klusterlets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Klusterlet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: operatoropenclustermanagementio-klusterlet-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/operatoropenclustermanagementio-klusterlet-editor/README.md b/charts/operatoropenclustermanagementio-klusterlet-editor/README.md index 27f7b1dea7..6dd7e39c7d 100644 --- a/charts/operatoropenclustermanagementio-klusterlet-editor/README.md +++ b/charts/operatoropenclustermanagementio-klusterlet-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/operatoropenclustermanagementio-klusterlet-editor --version=v0.23.0 -$ helm upgrade -i operatoropenclustermanagementio-klusterlet-editor appscode/operatoropenclustermanagementio-klusterlet-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/operatoropenclustermanagementio-klusterlet-editor --version=v0.24.0 +$ helm upgrade -i operatoropenclustermanagementio-klusterlet-editor appscode/operatoropenclustermanagementio-klusterlet-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Klusterlet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `operatoropenclustermanagementio-klusterlet-editor`: ```bash -$ helm upgrade -i operatoropenclustermanagementio-klusterlet-editor appscode/operatoropenclustermanagementio-klusterlet-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i operatoropenclustermanagementio-klusterlet-editor appscode/operatoropenclustermanagementio-klusterlet-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Klusterlet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `operatoropencluste Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i operatoropenclustermanagementio-klusterlet-editor appscode/operatoropenclustermanagementio-klusterlet-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=operator.open-cluster-management.io/v1 +$ helm upgrade -i operatoropenclustermanagementio-klusterlet-editor appscode/operatoropenclustermanagementio-klusterlet-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=operator.open-cluster-management.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i operatoropenclustermanagementio-klusterlet-editor appscode/operatoropenclustermanagementio-klusterlet-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i operatoropenclustermanagementio-klusterlet-editor appscode/operatoropenclustermanagementio-klusterlet-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-cassandraopsrequest-editor/Chart.yaml b/charts/opskubedbcom-cassandraopsrequest-editor/Chart.yaml index 0121a42f87..6e3d557f21 100644 --- a/charts/opskubedbcom-cassandraopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-cassandraopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"cassandraopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: CassandraOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-cassandraopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-cassandraopsrequest-editor/README.md b/charts/opskubedbcom-cassandraopsrequest-editor/README.md index 65db874870..0c49490fd4 100644 --- a/charts/opskubedbcom-cassandraopsrequest-editor/README.md +++ b/charts/opskubedbcom-cassandraopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-cassandraopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-cassandraopsrequest-editor appscode/opskubedbcom-cassandraopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-cassandraopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-cassandraopsrequest-editor appscode/opskubedbcom-cassandraopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CassandraOpsRequest Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `opskubedbcom-cassandraopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-cassandraopsrequest-editor appscode/opskubedbcom-cassandraopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-cassandraopsrequest-editor appscode/opskubedbcom-cassandraopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a CassandraOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-cassa Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-cassandraopsrequest-editor appscode/opskubedbcom-cassandraopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-cassandraopsrequest-editor appscode/opskubedbcom-cassandraopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-cassandraopsrequest-editor appscode/opskubedbcom-cassandraopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-cassandraopsrequest-editor appscode/opskubedbcom-cassandraopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-clickhouseopsrequest-editor/Chart.yaml b/charts/opskubedbcom-clickhouseopsrequest-editor/Chart.yaml index 4d6987c571..b75e56f299 100644 --- a/charts/opskubedbcom-clickhouseopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-clickhouseopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"clickhouseopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClickHouseOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-clickhouseopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-clickhouseopsrequest-editor/README.md b/charts/opskubedbcom-clickhouseopsrequest-editor/README.md index 4ca7608364..39cb3ee314 100644 --- a/charts/opskubedbcom-clickhouseopsrequest-editor/README.md +++ b/charts/opskubedbcom-clickhouseopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-clickhouseopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-clickhouseopsrequest-editor appscode/opskubedbcom-clickhouseopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-clickhouseopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-clickhouseopsrequest-editor appscode/opskubedbcom-clickhouseopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClickHouseOpsRequest Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `opskubedbcom-clickhouseopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-clickhouseopsrequest-editor appscode/opskubedbcom-clickhouseopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-clickhouseopsrequest-editor appscode/opskubedbcom-clickhouseopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClickHouseOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-click Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-clickhouseopsrequest-editor appscode/opskubedbcom-clickhouseopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-clickhouseopsrequest-editor appscode/opskubedbcom-clickhouseopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-clickhouseopsrequest-editor appscode/opskubedbcom-clickhouseopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-clickhouseopsrequest-editor appscode/opskubedbcom-clickhouseopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-druidopsrequest-editor/Chart.yaml b/charts/opskubedbcom-druidopsrequest-editor/Chart.yaml index 4a67c35a18..365ac99143 100644 --- a/charts/opskubedbcom-druidopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-druidopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"druidopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: DruidOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-druidopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-druidopsrequest-editor/README.md b/charts/opskubedbcom-druidopsrequest-editor/README.md index bc5662585a..47b3cb51fb 100644 --- a/charts/opskubedbcom-druidopsrequest-editor/README.md +++ b/charts/opskubedbcom-druidopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-druidopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-druidopsrequest-editor appscode/opskubedbcom-druidopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-druidopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-druidopsrequest-editor appscode/opskubedbcom-druidopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DruidOpsRequest Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `opskubedbcom-druidopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-druidopsrequest-editor appscode/opskubedbcom-druidopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-druidopsrequest-editor appscode/opskubedbcom-druidopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a DruidOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-druid Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-druidopsrequest-editor appscode/opskubedbcom-druidopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-druidopsrequest-editor appscode/opskubedbcom-druidopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-druidopsrequest-editor appscode/opskubedbcom-druidopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-druidopsrequest-editor appscode/opskubedbcom-druidopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-druidopsrequest-editor/ui/create-ui.yaml b/charts/opskubedbcom-druidopsrequest-editor/ui/create-ui.yaml index a97118389d..11c809e4e2 100644 --- a/charts/opskubedbcom-druidopsrequest-editor/ui/create-ui.yaml +++ b/charts/opskubedbcom-druidopsrequest-editor/ui/create-ui.yaml @@ -619,7 +619,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 computed: setValueFromDbDetails|/spec/tls/certificates|/spec/tls/certificates functionCallbacks: getAliasOptions: diff --git a/charts/opskubedbcom-elasticsearchopsrequest-editor/Chart.yaml b/charts/opskubedbcom-elasticsearchopsrequest-editor/Chart.yaml index 399bc0a99e..57c5acc7c1 100644 --- a/charts/opskubedbcom-elasticsearchopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-elasticsearchopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"elasticsearchopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ElasticsearchOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-elasticsearchopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-elasticsearchopsrequest-editor/README.md b/charts/opskubedbcom-elasticsearchopsrequest-editor/README.md index 39912cb6f9..e8d0228fc1 100644 --- a/charts/opskubedbcom-elasticsearchopsrequest-editor/README.md +++ b/charts/opskubedbcom-elasticsearchopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-elasticsearchopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-elasticsearchopsrequest-editor appscode/opskubedbcom-elasticsearchopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-elasticsearchopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-elasticsearchopsrequest-editor appscode/opskubedbcom-elasticsearchopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchOpsRequest Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `opskubedbcom-elasticsearchopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-elasticsearchopsrequest-editor appscode/opskubedbcom-elasticsearchopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-elasticsearchopsrequest-editor appscode/opskubedbcom-elasticsearchopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ElasticsearchOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-elast Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-elasticsearchopsrequest-editor appscode/opskubedbcom-elasticsearchopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-elasticsearchopsrequest-editor appscode/opskubedbcom-elasticsearchopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-elasticsearchopsrequest-editor appscode/opskubedbcom-elasticsearchopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-elasticsearchopsrequest-editor appscode/opskubedbcom-elasticsearchopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-elasticsearchopsrequest-editor/ui/create-ui.yaml b/charts/opskubedbcom-elasticsearchopsrequest-editor/ui/create-ui.yaml index fc9dafeee8..509568b183 100644 --- a/charts/opskubedbcom-elasticsearchopsrequest-editor/ui/create-ui.yaml +++ b/charts/opskubedbcom-elasticsearchopsrequest-editor/ui/create-ui.yaml @@ -1150,7 +1150,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 computed: setValueFromDbDetails|/spec/tls/certificates|/spec/tls/certificates functionCallbacks: getAliasOptions: diff --git a/charts/opskubedbcom-etcdopsrequest-editor/Chart.yaml b/charts/opskubedbcom-etcdopsrequest-editor/Chart.yaml index 47808ef04e..91eb71a3e1 100644 --- a/charts/opskubedbcom-etcdopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-etcdopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"etcdopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: EtcdOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-etcdopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-etcdopsrequest-editor/README.md b/charts/opskubedbcom-etcdopsrequest-editor/README.md index 1407105d0d..3e4a739c69 100644 --- a/charts/opskubedbcom-etcdopsrequest-editor/README.md +++ b/charts/opskubedbcom-etcdopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-etcdopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-etcdopsrequest-editor appscode/opskubedbcom-etcdopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-etcdopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-etcdopsrequest-editor appscode/opskubedbcom-etcdopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EtcdOpsRequest Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `opskubedbcom-etcdopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-etcdopsrequest-editor appscode/opskubedbcom-etcdopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-etcdopsrequest-editor appscode/opskubedbcom-etcdopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a EtcdOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-etcdo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-etcdopsrequest-editor appscode/opskubedbcom-etcdopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-etcdopsrequest-editor appscode/opskubedbcom-etcdopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-etcdopsrequest-editor appscode/opskubedbcom-etcdopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-etcdopsrequest-editor appscode/opskubedbcom-etcdopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-ferretdbopsrequest-editor/Chart.yaml b/charts/opskubedbcom-ferretdbopsrequest-editor/Chart.yaml index 15f67e349d..8ebb225869 100644 --- a/charts/opskubedbcom-ferretdbopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-ferretdbopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"ferretdbopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FerretDBOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-ferretdbopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-ferretdbopsrequest-editor/README.md b/charts/opskubedbcom-ferretdbopsrequest-editor/README.md index ea5a973a48..2409fa1e4c 100644 --- a/charts/opskubedbcom-ferretdbopsrequest-editor/README.md +++ b/charts/opskubedbcom-ferretdbopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-ferretdbopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-ferretdbopsrequest-editor appscode/opskubedbcom-ferretdbopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-ferretdbopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-ferretdbopsrequest-editor appscode/opskubedbcom-ferretdbopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FerretDBOpsRequest Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `opskubedbcom-ferretdbopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-ferretdbopsrequest-editor appscode/opskubedbcom-ferretdbopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-ferretdbopsrequest-editor appscode/opskubedbcom-ferretdbopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FerretDBOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-ferre Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-ferretdbopsrequest-editor appscode/opskubedbcom-ferretdbopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-ferretdbopsrequest-editor appscode/opskubedbcom-ferretdbopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-ferretdbopsrequest-editor appscode/opskubedbcom-ferretdbopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-ferretdbopsrequest-editor appscode/opskubedbcom-ferretdbopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-ferretdbopsrequest-editor/ui/create-ui.yaml b/charts/opskubedbcom-ferretdbopsrequest-editor/ui/create-ui.yaml index dea7a95cd5..6629784d98 100644 --- a/charts/opskubedbcom-ferretdbopsrequest-editor/ui/create-ui.yaml +++ b/charts/opskubedbcom-ferretdbopsrequest-editor/ui/create-ui.yaml @@ -277,7 +277,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 computed: setValueFromDbDetails|/spec/tls/certificates|/spec/tls/certificates functionCallbacks: getAliasOptions: diff --git a/charts/opskubedbcom-hazelcastopsrequest-editor/Chart.yaml b/charts/opskubedbcom-hazelcastopsrequest-editor/Chart.yaml index face671aa8..95990aa425 100644 --- a/charts/opskubedbcom-hazelcastopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-hazelcastopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"hazelcastopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: HazelcastOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-hazelcastopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-hazelcastopsrequest-editor/README.md b/charts/opskubedbcom-hazelcastopsrequest-editor/README.md index 383c375fc0..8410c19218 100644 --- a/charts/opskubedbcom-hazelcastopsrequest-editor/README.md +++ b/charts/opskubedbcom-hazelcastopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-hazelcastopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-hazelcastopsrequest-editor appscode/opskubedbcom-hazelcastopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-hazelcastopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-hazelcastopsrequest-editor appscode/opskubedbcom-hazelcastopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HazelcastOpsRequest Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `opskubedbcom-hazelcastopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-hazelcastopsrequest-editor appscode/opskubedbcom-hazelcastopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-hazelcastopsrequest-editor appscode/opskubedbcom-hazelcastopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a HazelcastOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-hazel Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-hazelcastopsrequest-editor appscode/opskubedbcom-hazelcastopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-hazelcastopsrequest-editor appscode/opskubedbcom-hazelcastopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-hazelcastopsrequest-editor appscode/opskubedbcom-hazelcastopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-hazelcastopsrequest-editor appscode/opskubedbcom-hazelcastopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-igniteopsrequest-editor/Chart.yaml b/charts/opskubedbcom-igniteopsrequest-editor/Chart.yaml index c04d05b0f0..7dbe33a5d2 100644 --- a/charts/opskubedbcom-igniteopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-igniteopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"igniteopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: IgniteOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-igniteopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-igniteopsrequest-editor/README.md b/charts/opskubedbcom-igniteopsrequest-editor/README.md index 4061c308e0..ddf9670b83 100644 --- a/charts/opskubedbcom-igniteopsrequest-editor/README.md +++ b/charts/opskubedbcom-igniteopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-igniteopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-igniteopsrequest-editor appscode/opskubedbcom-igniteopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-igniteopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-igniteopsrequest-editor appscode/opskubedbcom-igniteopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a IgniteOpsRequest Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `opskubedbcom-igniteopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-igniteopsrequest-editor appscode/opskubedbcom-igniteopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-igniteopsrequest-editor appscode/opskubedbcom-igniteopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a IgniteOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-ignit Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-igniteopsrequest-editor appscode/opskubedbcom-igniteopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-igniteopsrequest-editor appscode/opskubedbcom-igniteopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-igniteopsrequest-editor appscode/opskubedbcom-igniteopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-igniteopsrequest-editor appscode/opskubedbcom-igniteopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-kafkaopsrequest-editor/Chart.yaml b/charts/opskubedbcom-kafkaopsrequest-editor/Chart.yaml index cf44960de7..c55334b19b 100644 --- a/charts/opskubedbcom-kafkaopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-kafkaopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"kafkaopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: KafkaOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-kafkaopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-kafkaopsrequest-editor/README.md b/charts/opskubedbcom-kafkaopsrequest-editor/README.md index 3518b9d86a..f1b0307c52 100644 --- a/charts/opskubedbcom-kafkaopsrequest-editor/README.md +++ b/charts/opskubedbcom-kafkaopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-kafkaopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-kafkaopsrequest-editor appscode/opskubedbcom-kafkaopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-kafkaopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-kafkaopsrequest-editor appscode/opskubedbcom-kafkaopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a KafkaOpsRequest Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `opskubedbcom-kafkaopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-kafkaopsrequest-editor appscode/opskubedbcom-kafkaopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-kafkaopsrequest-editor appscode/opskubedbcom-kafkaopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a KafkaOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-kafka Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-kafkaopsrequest-editor appscode/opskubedbcom-kafkaopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-kafkaopsrequest-editor appscode/opskubedbcom-kafkaopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-kafkaopsrequest-editor appscode/opskubedbcom-kafkaopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-kafkaopsrequest-editor appscode/opskubedbcom-kafkaopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-kafkaopsrequest-editor/ui/create-ui.yaml b/charts/opskubedbcom-kafkaopsrequest-editor/ui/create-ui.yaml index b6002fe1c1..368c346c85 100644 --- a/charts/opskubedbcom-kafkaopsrequest-editor/ui/create-ui.yaml +++ b/charts/opskubedbcom-kafkaopsrequest-editor/ui/create-ui.yaml @@ -510,7 +510,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 computed: setValueFromDbDetails|/spec/tls/certificates|/spec/tls/certificates functionCallbacks: getAliasOptions: diff --git a/charts/opskubedbcom-mariadbopsrequest-editor/Chart.yaml b/charts/opskubedbcom-mariadbopsrequest-editor/Chart.yaml index 813f4bb031..a797f48502 100644 --- a/charts/opskubedbcom-mariadbopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-mariadbopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"mariadbopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MariaDBOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-mariadbopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-mariadbopsrequest-editor/README.md b/charts/opskubedbcom-mariadbopsrequest-editor/README.md index 442b39d11d..153998c285 100644 --- a/charts/opskubedbcom-mariadbopsrequest-editor/README.md +++ b/charts/opskubedbcom-mariadbopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-mariadbopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-mariadbopsrequest-editor appscode/opskubedbcom-mariadbopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-mariadbopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-mariadbopsrequest-editor appscode/opskubedbcom-mariadbopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBOpsRequest Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `opskubedbcom-mariadbopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-mariadbopsrequest-editor appscode/opskubedbcom-mariadbopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-mariadbopsrequest-editor appscode/opskubedbcom-mariadbopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MariaDBOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-maria Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-mariadbopsrequest-editor appscode/opskubedbcom-mariadbopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-mariadbopsrequest-editor appscode/opskubedbcom-mariadbopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-mariadbopsrequest-editor appscode/opskubedbcom-mariadbopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-mariadbopsrequest-editor appscode/opskubedbcom-mariadbopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-mariadbopsrequest-editor/ui/create-ui.yaml b/charts/opskubedbcom-mariadbopsrequest-editor/ui/create-ui.yaml index 5876bde9ae..66703603e5 100644 --- a/charts/opskubedbcom-mariadbopsrequest-editor/ui/create-ui.yaml +++ b/charts/opskubedbcom-mariadbopsrequest-editor/ui/create-ui.yaml @@ -360,7 +360,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 computed: setValueFromDbDetails|/spec/tls/certificates|/spec/tls/certificates functionCallbacks: getAliasOptions: diff --git a/charts/opskubedbcom-memcachedopsrequest-editor/Chart.yaml b/charts/opskubedbcom-memcachedopsrequest-editor/Chart.yaml index b4e97eaa80..b04e4df3fe 100644 --- a/charts/opskubedbcom-memcachedopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-memcachedopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"memcachedopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MemcachedOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-memcachedopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-memcachedopsrequest-editor/README.md b/charts/opskubedbcom-memcachedopsrequest-editor/README.md index 4bfd1da7f3..b10617c7ac 100644 --- a/charts/opskubedbcom-memcachedopsrequest-editor/README.md +++ b/charts/opskubedbcom-memcachedopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-memcachedopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-memcachedopsrequest-editor appscode/opskubedbcom-memcachedopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-memcachedopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-memcachedopsrequest-editor appscode/opskubedbcom-memcachedopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MemcachedOpsRequest Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `opskubedbcom-memcachedopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-memcachedopsrequest-editor appscode/opskubedbcom-memcachedopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-memcachedopsrequest-editor appscode/opskubedbcom-memcachedopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MemcachedOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-memca Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-memcachedopsrequest-editor appscode/opskubedbcom-memcachedopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-memcachedopsrequest-editor appscode/opskubedbcom-memcachedopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-memcachedopsrequest-editor appscode/opskubedbcom-memcachedopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-memcachedopsrequest-editor appscode/opskubedbcom-memcachedopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-mongodbopsrequest-editor/Chart.yaml b/charts/opskubedbcom-mongodbopsrequest-editor/Chart.yaml index 2fbc69f070..46abd80cbe 100644 --- a/charts/opskubedbcom-mongodbopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-mongodbopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"mongodbopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MongoDBOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-mongodbopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-mongodbopsrequest-editor/README.md b/charts/opskubedbcom-mongodbopsrequest-editor/README.md index bef0f60341..c6a6ab8abd 100644 --- a/charts/opskubedbcom-mongodbopsrequest-editor/README.md +++ b/charts/opskubedbcom-mongodbopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-mongodbopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-mongodbopsrequest-editor appscode/opskubedbcom-mongodbopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-mongodbopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-mongodbopsrequest-editor appscode/opskubedbcom-mongodbopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBOpsRequest Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `opskubedbcom-mongodbopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-mongodbopsrequest-editor appscode/opskubedbcom-mongodbopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-mongodbopsrequest-editor appscode/opskubedbcom-mongodbopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MongoDBOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-mongo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-mongodbopsrequest-editor appscode/opskubedbcom-mongodbopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-mongodbopsrequest-editor appscode/opskubedbcom-mongodbopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-mongodbopsrequest-editor appscode/opskubedbcom-mongodbopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-mongodbopsrequest-editor appscode/opskubedbcom-mongodbopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-mongodbopsrequest-editor/ui/create-ui.yaml b/charts/opskubedbcom-mongodbopsrequest-editor/ui/create-ui.yaml index d857f40a91..fdea8e5d74 100644 --- a/charts/opskubedbcom-mongodbopsrequest-editor/ui/create-ui.yaml +++ b/charts/opskubedbcom-mongodbopsrequest-editor/ui/create-ui.yaml @@ -1053,7 +1053,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 computed: setValueFromDbDetails|/spec/tls/certificates|/spec/tls/certificates functionCallbacks: getAliasOptions: diff --git a/charts/opskubedbcom-mssqlserveropsrequest-editor/Chart.yaml b/charts/opskubedbcom-mssqlserveropsrequest-editor/Chart.yaml index f34593d257..ccf67e6ab7 100644 --- a/charts/opskubedbcom-mssqlserveropsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-mssqlserveropsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"mssqlserveropsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLServerOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-mssqlserveropsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-mssqlserveropsrequest-editor/README.md b/charts/opskubedbcom-mssqlserveropsrequest-editor/README.md index 332a445281..d1a0067ca2 100644 --- a/charts/opskubedbcom-mssqlserveropsrequest-editor/README.md +++ b/charts/opskubedbcom-mssqlserveropsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-mssqlserveropsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-mssqlserveropsrequest-editor appscode/opskubedbcom-mssqlserveropsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-mssqlserveropsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-mssqlserveropsrequest-editor appscode/opskubedbcom-mssqlserveropsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerOpsRequest Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `opskubedbcom-mssqlserveropsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-mssqlserveropsrequest-editor appscode/opskubedbcom-mssqlserveropsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-mssqlserveropsrequest-editor appscode/opskubedbcom-mssqlserveropsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLServerOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-mssql Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-mssqlserveropsrequest-editor appscode/opskubedbcom-mssqlserveropsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-mssqlserveropsrequest-editor appscode/opskubedbcom-mssqlserveropsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-mssqlserveropsrequest-editor appscode/opskubedbcom-mssqlserveropsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-mssqlserveropsrequest-editor appscode/opskubedbcom-mssqlserveropsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-mysqlopsrequest-editor/Chart.yaml b/charts/opskubedbcom-mysqlopsrequest-editor/Chart.yaml index d47501ecfb..998d2bd537 100644 --- a/charts/opskubedbcom-mysqlopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-mysqlopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"mysqlopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MySQLOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-mysqlopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-mysqlopsrequest-editor/README.md b/charts/opskubedbcom-mysqlopsrequest-editor/README.md index 905f21e82a..2508337241 100644 --- a/charts/opskubedbcom-mysqlopsrequest-editor/README.md +++ b/charts/opskubedbcom-mysqlopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-mysqlopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-mysqlopsrequest-editor appscode/opskubedbcom-mysqlopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-mysqlopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-mysqlopsrequest-editor appscode/opskubedbcom-mysqlopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLOpsRequest Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `opskubedbcom-mysqlopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-mysqlopsrequest-editor appscode/opskubedbcom-mysqlopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-mysqlopsrequest-editor appscode/opskubedbcom-mysqlopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MySQLOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-mysql Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-mysqlopsrequest-editor appscode/opskubedbcom-mysqlopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-mysqlopsrequest-editor appscode/opskubedbcom-mysqlopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-mysqlopsrequest-editor appscode/opskubedbcom-mysqlopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-mysqlopsrequest-editor appscode/opskubedbcom-mysqlopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-mysqlopsrequest-editor/ui/create-ui.yaml b/charts/opskubedbcom-mysqlopsrequest-editor/ui/create-ui.yaml index 6943fd73ee..90dadf47ec 100644 --- a/charts/opskubedbcom-mysqlopsrequest-editor/ui/create-ui.yaml +++ b/charts/opskubedbcom-mysqlopsrequest-editor/ui/create-ui.yaml @@ -360,7 +360,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 computed: setValueFromDbDetails|/spec/tls/certificates|/spec/tls/certificates functionCallbacks: getAliasOptions: diff --git a/charts/opskubedbcom-perconaxtradbopsrequest-editor/Chart.yaml b/charts/opskubedbcom-perconaxtradbopsrequest-editor/Chart.yaml index 91cce583a5..c4c0fd915f 100644 --- a/charts/opskubedbcom-perconaxtradbopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-perconaxtradbopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"perconaxtradbopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PerconaXtraDBOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-perconaxtradbopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-perconaxtradbopsrequest-editor/README.md b/charts/opskubedbcom-perconaxtradbopsrequest-editor/README.md index 67ccdfbca3..a91c4073cc 100644 --- a/charts/opskubedbcom-perconaxtradbopsrequest-editor/README.md +++ b/charts/opskubedbcom-perconaxtradbopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-perconaxtradbopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-perconaxtradbopsrequest-editor appscode/opskubedbcom-perconaxtradbopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-perconaxtradbopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-perconaxtradbopsrequest-editor appscode/opskubedbcom-perconaxtradbopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PerconaXtraDBOpsRequest Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `opskubedbcom-perconaxtradbopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-perconaxtradbopsrequest-editor appscode/opskubedbcom-perconaxtradbopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-perconaxtradbopsrequest-editor appscode/opskubedbcom-perconaxtradbopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PerconaXtraDBOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-perco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-perconaxtradbopsrequest-editor appscode/opskubedbcom-perconaxtradbopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-perconaxtradbopsrequest-editor appscode/opskubedbcom-perconaxtradbopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-perconaxtradbopsrequest-editor appscode/opskubedbcom-perconaxtradbopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-perconaxtradbopsrequest-editor appscode/opskubedbcom-perconaxtradbopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-perconaxtradbopsrequest-editor/ui/create-ui.yaml b/charts/opskubedbcom-perconaxtradbopsrequest-editor/ui/create-ui.yaml index 84298c9c8d..2ab23bff53 100644 --- a/charts/opskubedbcom-perconaxtradbopsrequest-editor/ui/create-ui.yaml +++ b/charts/opskubedbcom-perconaxtradbopsrequest-editor/ui/create-ui.yaml @@ -358,7 +358,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 computed: setValueFromDbDetails|/spec/tls/certificates|/spec/tls/certificates functionCallbacks: getAliasOptions: diff --git a/charts/opskubedbcom-pgbounceropsrequest-editor/Chart.yaml b/charts/opskubedbcom-pgbounceropsrequest-editor/Chart.yaml index ec07ebff7b..16d8e733b9 100644 --- a/charts/opskubedbcom-pgbounceropsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-pgbounceropsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"pgbounceropsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PgBouncerOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-pgbounceropsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-pgbounceropsrequest-editor/README.md b/charts/opskubedbcom-pgbounceropsrequest-editor/README.md index 804ca488b2..30672274ea 100644 --- a/charts/opskubedbcom-pgbounceropsrequest-editor/README.md +++ b/charts/opskubedbcom-pgbounceropsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-pgbounceropsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-pgbounceropsrequest-editor appscode/opskubedbcom-pgbounceropsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-pgbounceropsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-pgbounceropsrequest-editor appscode/opskubedbcom-pgbounceropsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerOpsRequest Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `opskubedbcom-pgbounceropsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-pgbounceropsrequest-editor appscode/opskubedbcom-pgbounceropsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-pgbounceropsrequest-editor appscode/opskubedbcom-pgbounceropsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PgBouncerOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-pgbou Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-pgbounceropsrequest-editor appscode/opskubedbcom-pgbounceropsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-pgbounceropsrequest-editor appscode/opskubedbcom-pgbounceropsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-pgbounceropsrequest-editor appscode/opskubedbcom-pgbounceropsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-pgbounceropsrequest-editor appscode/opskubedbcom-pgbounceropsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-pgpoolopsrequest-editor/Chart.yaml b/charts/opskubedbcom-pgpoolopsrequest-editor/Chart.yaml index 192c7cb25e..ac61ae3fe5 100644 --- a/charts/opskubedbcom-pgpoolopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-pgpoolopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"pgpoolopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PgpoolOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-pgpoolopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-pgpoolopsrequest-editor/README.md b/charts/opskubedbcom-pgpoolopsrequest-editor/README.md index f86f6d2d67..8bcc221374 100644 --- a/charts/opskubedbcom-pgpoolopsrequest-editor/README.md +++ b/charts/opskubedbcom-pgpoolopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-pgpoolopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-pgpoolopsrequest-editor appscode/opskubedbcom-pgpoolopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-pgpoolopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-pgpoolopsrequest-editor appscode/opskubedbcom-pgpoolopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgpoolOpsRequest Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `opskubedbcom-pgpoolopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-pgpoolopsrequest-editor appscode/opskubedbcom-pgpoolopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-pgpoolopsrequest-editor appscode/opskubedbcom-pgpoolopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PgpoolOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-pgpoo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-pgpoolopsrequest-editor appscode/opskubedbcom-pgpoolopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-pgpoolopsrequest-editor appscode/opskubedbcom-pgpoolopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-pgpoolopsrequest-editor appscode/opskubedbcom-pgpoolopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-pgpoolopsrequest-editor appscode/opskubedbcom-pgpoolopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-pgpoolopsrequest-editor/ui/create-ui.yaml b/charts/opskubedbcom-pgpoolopsrequest-editor/ui/create-ui.yaml index 79be82b1d7..435760fd70 100644 --- a/charts/opskubedbcom-pgpoolopsrequest-editor/ui/create-ui.yaml +++ b/charts/opskubedbcom-pgpoolopsrequest-editor/ui/create-ui.yaml @@ -315,7 +315,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 computed: setValueFromDbDetails|/spec/tls/certificates|/spec/tls/certificates functionCallbacks: getAliasOptions: diff --git a/charts/opskubedbcom-postgresopsrequest-editor/Chart.yaml b/charts/opskubedbcom-postgresopsrequest-editor/Chart.yaml index 93981bab80..9b5a610882 100644 --- a/charts/opskubedbcom-postgresopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-postgresopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"postgresopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PostgresOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-postgresopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-postgresopsrequest-editor/README.md b/charts/opskubedbcom-postgresopsrequest-editor/README.md index 627bae110a..c3e95dadbc 100644 --- a/charts/opskubedbcom-postgresopsrequest-editor/README.md +++ b/charts/opskubedbcom-postgresopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-postgresopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-postgresopsrequest-editor appscode/opskubedbcom-postgresopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-postgresopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-postgresopsrequest-editor appscode/opskubedbcom-postgresopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresOpsRequest Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `opskubedbcom-postgresopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-postgresopsrequest-editor appscode/opskubedbcom-postgresopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-postgresopsrequest-editor appscode/opskubedbcom-postgresopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PostgresOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-postg Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-postgresopsrequest-editor appscode/opskubedbcom-postgresopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-postgresopsrequest-editor appscode/opskubedbcom-postgresopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-postgresopsrequest-editor appscode/opskubedbcom-postgresopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-postgresopsrequest-editor appscode/opskubedbcom-postgresopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-postgresopsrequest-editor/ui/create-ui.yaml b/charts/opskubedbcom-postgresopsrequest-editor/ui/create-ui.yaml index f5b1aa0ff4..e55920c706 100644 --- a/charts/opskubedbcom-postgresopsrequest-editor/ui/create-ui.yaml +++ b/charts/opskubedbcom-postgresopsrequest-editor/ui/create-ui.yaml @@ -382,7 +382,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 computed: setValueFromDbDetails|/spec/tls/certificates|/spec/tls/certificates functionCallbacks: getAliasOptions: diff --git a/charts/opskubedbcom-proxysqlopsrequest-editor/Chart.yaml b/charts/opskubedbcom-proxysqlopsrequest-editor/Chart.yaml index edabd5ed20..653216e862 100644 --- a/charts/opskubedbcom-proxysqlopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-proxysqlopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"proxysqlopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProxySQLOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-proxysqlopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-proxysqlopsrequest-editor/README.md b/charts/opskubedbcom-proxysqlopsrequest-editor/README.md index 84b0f47653..c19a400428 100644 --- a/charts/opskubedbcom-proxysqlopsrequest-editor/README.md +++ b/charts/opskubedbcom-proxysqlopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-proxysqlopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-proxysqlopsrequest-editor appscode/opskubedbcom-proxysqlopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-proxysqlopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-proxysqlopsrequest-editor appscode/opskubedbcom-proxysqlopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQLOpsRequest Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `opskubedbcom-proxysqlopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-proxysqlopsrequest-editor appscode/opskubedbcom-proxysqlopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-proxysqlopsrequest-editor appscode/opskubedbcom-proxysqlopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProxySQLOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-proxy Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-proxysqlopsrequest-editor appscode/opskubedbcom-proxysqlopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-proxysqlopsrequest-editor appscode/opskubedbcom-proxysqlopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-proxysqlopsrequest-editor appscode/opskubedbcom-proxysqlopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-proxysqlopsrequest-editor appscode/opskubedbcom-proxysqlopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-proxysqlopsrequest-editor/ui/create-ui.yaml b/charts/opskubedbcom-proxysqlopsrequest-editor/ui/create-ui.yaml index e563e4e439..59d6f68679 100644 --- a/charts/opskubedbcom-proxysqlopsrequest-editor/ui/create-ui.yaml +++ b/charts/opskubedbcom-proxysqlopsrequest-editor/ui/create-ui.yaml @@ -506,7 +506,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 computed: setValueFromDbDetails|/spec/tls/certificates|/spec/tls/certificates functionCallbacks: getAliasOptions: diff --git a/charts/opskubedbcom-rabbitmqopsrequest-editor/Chart.yaml b/charts/opskubedbcom-rabbitmqopsrequest-editor/Chart.yaml index 432acdedcb..c83cd935ca 100644 --- a/charts/opskubedbcom-rabbitmqopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-rabbitmqopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"rabbitmqopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RabbitMQOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-rabbitmqopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-rabbitmqopsrequest-editor/README.md b/charts/opskubedbcom-rabbitmqopsrequest-editor/README.md index fce18016dc..5cd9d54331 100644 --- a/charts/opskubedbcom-rabbitmqopsrequest-editor/README.md +++ b/charts/opskubedbcom-rabbitmqopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-rabbitmqopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-rabbitmqopsrequest-editor appscode/opskubedbcom-rabbitmqopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-rabbitmqopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-rabbitmqopsrequest-editor appscode/opskubedbcom-rabbitmqopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RabbitMQOpsRequest Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `opskubedbcom-rabbitmqopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-rabbitmqopsrequest-editor appscode/opskubedbcom-rabbitmqopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-rabbitmqopsrequest-editor appscode/opskubedbcom-rabbitmqopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RabbitMQOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-rabbi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-rabbitmqopsrequest-editor appscode/opskubedbcom-rabbitmqopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-rabbitmqopsrequest-editor appscode/opskubedbcom-rabbitmqopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-rabbitmqopsrequest-editor appscode/opskubedbcom-rabbitmqopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-rabbitmqopsrequest-editor appscode/opskubedbcom-rabbitmqopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-rabbitmqopsrequest-editor/ui/create-ui.yaml b/charts/opskubedbcom-rabbitmqopsrequest-editor/ui/create-ui.yaml index e5426e474c..2656f9d172 100644 --- a/charts/opskubedbcom-rabbitmqopsrequest-editor/ui/create-ui.yaml +++ b/charts/opskubedbcom-rabbitmqopsrequest-editor/ui/create-ui.yaml @@ -350,7 +350,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 computed: setValueFromDbDetails|/spec/tls/certificates|/spec/tls/certificates functionCallbacks: getAliasOptions: diff --git a/charts/opskubedbcom-redisopsrequest-editor/Chart.yaml b/charts/opskubedbcom-redisopsrequest-editor/Chart.yaml index 2f0fd1104b..08d754d31c 100644 --- a/charts/opskubedbcom-redisopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-redisopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"redisopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-redisopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-redisopsrequest-editor/README.md b/charts/opskubedbcom-redisopsrequest-editor/README.md index 0d6f5f49fe..ad7c1b0804 100644 --- a/charts/opskubedbcom-redisopsrequest-editor/README.md +++ b/charts/opskubedbcom-redisopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-redisopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-redisopsrequest-editor appscode/opskubedbcom-redisopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-redisopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-redisopsrequest-editor appscode/opskubedbcom-redisopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisOpsRequest Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `opskubedbcom-redisopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-redisopsrequest-editor appscode/opskubedbcom-redisopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-redisopsrequest-editor appscode/opskubedbcom-redisopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-redis Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-redisopsrequest-editor appscode/opskubedbcom-redisopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-redisopsrequest-editor appscode/opskubedbcom-redisopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-redisopsrequest-editor appscode/opskubedbcom-redisopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-redisopsrequest-editor appscode/opskubedbcom-redisopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-redisopsrequest-editor/ui/create-ui.yaml b/charts/opskubedbcom-redisopsrequest-editor/ui/create-ui.yaml index f99bcfd9bc..600dada157 100644 --- a/charts/opskubedbcom-redisopsrequest-editor/ui/create-ui.yaml +++ b/charts/opskubedbcom-redisopsrequest-editor/ui/create-ui.yaml @@ -363,7 +363,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 computed: setValueFromDbDetails|/spec/tls/certificates|/spec/tls/certificates functionCallbacks: getAliasOptions: diff --git a/charts/opskubedbcom-redissentinelopsrequest-editor/Chart.yaml b/charts/opskubedbcom-redissentinelopsrequest-editor/Chart.yaml index 70b9eedb7d..28f79df62a 100644 --- a/charts/opskubedbcom-redissentinelopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-redissentinelopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"redissentinelopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisSentinelOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-redissentinelopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-redissentinelopsrequest-editor/README.md b/charts/opskubedbcom-redissentinelopsrequest-editor/README.md index 4923f5aea4..7545a32a1e 100644 --- a/charts/opskubedbcom-redissentinelopsrequest-editor/README.md +++ b/charts/opskubedbcom-redissentinelopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-redissentinelopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-redissentinelopsrequest-editor appscode/opskubedbcom-redissentinelopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-redissentinelopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-redissentinelopsrequest-editor appscode/opskubedbcom-redissentinelopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisSentinelOpsRequest Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `opskubedbcom-redissentinelopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-redissentinelopsrequest-editor appscode/opskubedbcom-redissentinelopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-redissentinelopsrequest-editor appscode/opskubedbcom-redissentinelopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisSentinelOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-redis Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-redissentinelopsrequest-editor appscode/opskubedbcom-redissentinelopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-redissentinelopsrequest-editor appscode/opskubedbcom-redissentinelopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-redissentinelopsrequest-editor appscode/opskubedbcom-redissentinelopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-redissentinelopsrequest-editor appscode/opskubedbcom-redissentinelopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-singlestoreopsrequest-editor/Chart.yaml b/charts/opskubedbcom-singlestoreopsrequest-editor/Chart.yaml index 9509261850..49017e3d4e 100644 --- a/charts/opskubedbcom-singlestoreopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-singlestoreopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"singlestoreopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SinglestoreOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-singlestoreopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-singlestoreopsrequest-editor/README.md b/charts/opskubedbcom-singlestoreopsrequest-editor/README.md index 6326317756..84fb861885 100644 --- a/charts/opskubedbcom-singlestoreopsrequest-editor/README.md +++ b/charts/opskubedbcom-singlestoreopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-singlestoreopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-singlestoreopsrequest-editor appscode/opskubedbcom-singlestoreopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-singlestoreopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-singlestoreopsrequest-editor appscode/opskubedbcom-singlestoreopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SinglestoreOpsRequest Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `opskubedbcom-singlestoreopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-singlestoreopsrequest-editor appscode/opskubedbcom-singlestoreopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-singlestoreopsrequest-editor appscode/opskubedbcom-singlestoreopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SinglestoreOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-singl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-singlestoreopsrequest-editor appscode/opskubedbcom-singlestoreopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-singlestoreopsrequest-editor appscode/opskubedbcom-singlestoreopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-singlestoreopsrequest-editor appscode/opskubedbcom-singlestoreopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-singlestoreopsrequest-editor appscode/opskubedbcom-singlestoreopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-singlestoreopsrequest-editor/ui/create-ui.yaml b/charts/opskubedbcom-singlestoreopsrequest-editor/ui/create-ui.yaml index e4e039b790..16cb400093 100644 --- a/charts/opskubedbcom-singlestoreopsrequest-editor/ui/create-ui.yaml +++ b/charts/opskubedbcom-singlestoreopsrequest-editor/ui/create-ui.yaml @@ -479,7 +479,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 computed: setValueFromDbDetails|/spec/tls/certificates|/spec/tls/certificates functionCallbacks: getAliasOptions: diff --git a/charts/opskubedbcom-solropsrequest-editor/Chart.yaml b/charts/opskubedbcom-solropsrequest-editor/Chart.yaml index 37ab1df2c9..63972759dd 100644 --- a/charts/opskubedbcom-solropsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-solropsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"solropsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SolrOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-solropsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-solropsrequest-editor/README.md b/charts/opskubedbcom-solropsrequest-editor/README.md index d487a245c2..c02667e10b 100644 --- a/charts/opskubedbcom-solropsrequest-editor/README.md +++ b/charts/opskubedbcom-solropsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-solropsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-solropsrequest-editor appscode/opskubedbcom-solropsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-solropsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-solropsrequest-editor appscode/opskubedbcom-solropsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SolrOpsRequest Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `opskubedbcom-solropsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-solropsrequest-editor appscode/opskubedbcom-solropsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-solropsrequest-editor appscode/opskubedbcom-solropsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SolrOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-solro Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-solropsrequest-editor appscode/opskubedbcom-solropsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-solropsrequest-editor appscode/opskubedbcom-solropsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-solropsrequest-editor appscode/opskubedbcom-solropsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-solropsrequest-editor appscode/opskubedbcom-solropsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubedbcom-solropsrequest-editor/ui/create-ui.yaml b/charts/opskubedbcom-solropsrequest-editor/ui/create-ui.yaml index 59b3b98975..c673c1932d 100644 --- a/charts/opskubedbcom-solropsrequest-editor/ui/create-ui.yaml +++ b/charts/opskubedbcom-solropsrequest-editor/ui/create-ui.yaml @@ -578,7 +578,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 computed: setValueFromDbDetails|/spec/tls/certificates|/spec/tls/certificates functionCallbacks: getAliasOptions: diff --git a/charts/opskubedbcom-zookeeperopsrequest-editor/Chart.yaml b/charts/opskubedbcom-zookeeperopsrequest-editor/Chart.yaml index 63b252b479..cbe0d1e310 100644 --- a/charts/opskubedbcom-zookeeperopsrequest-editor/Chart.yaml +++ b/charts/opskubedbcom-zookeeperopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubedb.com","version":"v1alpha1","resource":"zookeeperopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ZooKeeperOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubedbcom-zookeeperopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubedbcom-zookeeperopsrequest-editor/README.md b/charts/opskubedbcom-zookeeperopsrequest-editor/README.md index b8df4e3d31..3226ce7733 100644 --- a/charts/opskubedbcom-zookeeperopsrequest-editor/README.md +++ b/charts/opskubedbcom-zookeeperopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubedbcom-zookeeperopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubedbcom-zookeeperopsrequest-editor appscode/opskubedbcom-zookeeperopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubedbcom-zookeeperopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubedbcom-zookeeperopsrequest-editor appscode/opskubedbcom-zookeeperopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ZooKeeperOpsRequest Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `opskubedbcom-zookeeperopsrequest-editor`: ```bash -$ helm upgrade -i opskubedbcom-zookeeperopsrequest-editor appscode/opskubedbcom-zookeeperopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubedbcom-zookeeperopsrequest-editor appscode/opskubedbcom-zookeeperopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ZooKeeperOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubedbcom-zooke Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubedbcom-zookeeperopsrequest-editor appscode/opskubedbcom-zookeeperopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubedb.com/v1alpha1 +$ helm upgrade -i opskubedbcom-zookeeperopsrequest-editor appscode/opskubedbcom-zookeeperopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubedbcom-zookeeperopsrequest-editor appscode/opskubedbcom-zookeeperopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubedbcom-zookeeperopsrequest-editor appscode/opskubedbcom-zookeeperopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubevaultcom-vaultopsrequest-editor/Chart.yaml b/charts/opskubevaultcom-vaultopsrequest-editor/Chart.yaml index 8e358be548..32460d5185 100644 --- a/charts/opskubevaultcom-vaultopsrequest-editor/Chart.yaml +++ b/charts/opskubevaultcom-vaultopsrequest-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ops.kubevault.com","version":"v1alpha1","resource":"vaultopsrequests"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VaultOpsRequest Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: opskubevaultcom-vaultopsrequest-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/opskubevaultcom-vaultopsrequest-editor/README.md b/charts/opskubevaultcom-vaultopsrequest-editor/README.md index 26ac1cd914..2b66292901 100644 --- a/charts/opskubevaultcom-vaultopsrequest-editor/README.md +++ b/charts/opskubevaultcom-vaultopsrequest-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/opskubevaultcom-vaultopsrequest-editor --version=v0.23.0 -$ helm upgrade -i opskubevaultcom-vaultopsrequest-editor appscode/opskubevaultcom-vaultopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/opskubevaultcom-vaultopsrequest-editor --version=v0.24.0 +$ helm upgrade -i opskubevaultcom-vaultopsrequest-editor appscode/opskubevaultcom-vaultopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VaultOpsRequest Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `opskubevaultcom-vaultopsrequest-editor`: ```bash -$ helm upgrade -i opskubevaultcom-vaultopsrequest-editor appscode/opskubevaultcom-vaultopsrequest-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i opskubevaultcom-vaultopsrequest-editor appscode/opskubevaultcom-vaultopsrequest-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VaultOpsRequest Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `opskubevaultcom-va Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i opskubevaultcom-vaultopsrequest-editor appscode/opskubevaultcom-vaultopsrequest-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ops.kubevault.com/v1alpha1 +$ helm upgrade -i opskubevaultcom-vaultopsrequest-editor appscode/opskubevaultcom-vaultopsrequest-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ops.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i opskubevaultcom-vaultopsrequest-editor appscode/opskubevaultcom-vaultopsrequest-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i opskubevaultcom-vaultopsrequest-editor appscode/opskubevaultcom-vaultopsrequest-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/opskubevaultcom-vaultopsrequest-editor/ui/create-ui.yaml b/charts/opskubevaultcom-vaultopsrequest-editor/ui/create-ui.yaml index 5da2a8ce27..ec186604be 100644 --- a/charts/opskubevaultcom-vaultopsrequest-editor/ui/create-ui.yaml +++ b/charts/opskubevaultcom-vaultopsrequest-editor/ui/create-ui.yaml @@ -124,7 +124,7 @@ steps: - alias: reusable_certificates chart: name: uibytebuildersdev-component-certificates - version: v0.23.0 + version: v0.24.0 computed: setValueFromVaultDetails|/spec/tls/certificates|/spec/tls/certificates functionCallbacks: getAliasOptions: diff --git a/charts/pkgcrossplaneio-configuration-editor/Chart.yaml b/charts/pkgcrossplaneio-configuration-editor/Chart.yaml index 51729906df..02a8936d6d 100644 --- a/charts/pkgcrossplaneio-configuration-editor/Chart.yaml +++ b/charts/pkgcrossplaneio-configuration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"pkg.crossplane.io","version":"v1","resource":"configurations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Configuration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: pkgcrossplaneio-configuration-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/pkgcrossplaneio-configuration-editor/README.md b/charts/pkgcrossplaneio-configuration-editor/README.md index 068379a7b7..59ce875d83 100644 --- a/charts/pkgcrossplaneio-configuration-editor/README.md +++ b/charts/pkgcrossplaneio-configuration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/pkgcrossplaneio-configuration-editor --version=v0.23.0 -$ helm upgrade -i pkgcrossplaneio-configuration-editor appscode/pkgcrossplaneio-configuration-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/pkgcrossplaneio-configuration-editor --version=v0.24.0 +$ helm upgrade -i pkgcrossplaneio-configuration-editor appscode/pkgcrossplaneio-configuration-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Configuration Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `pkgcrossplaneio-configuration-editor`: ```bash -$ helm upgrade -i pkgcrossplaneio-configuration-editor appscode/pkgcrossplaneio-configuration-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i pkgcrossplaneio-configuration-editor appscode/pkgcrossplaneio-configuration-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Configuration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `pkgcrossplaneio-co Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-configuration-editor appscode/pkgcrossplaneio-configuration-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=pkg.crossplane.io/v1 +$ helm upgrade -i pkgcrossplaneio-configuration-editor appscode/pkgcrossplaneio-configuration-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=pkg.crossplane.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-configuration-editor appscode/pkgcrossplaneio-configuration-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i pkgcrossplaneio-configuration-editor appscode/pkgcrossplaneio-configuration-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/pkgcrossplaneio-configurationrevision-editor/Chart.yaml b/charts/pkgcrossplaneio-configurationrevision-editor/Chart.yaml index 3c7ab5b742..72d2a4124b 100644 --- a/charts/pkgcrossplaneio-configurationrevision-editor/Chart.yaml +++ b/charts/pkgcrossplaneio-configurationrevision-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"pkg.crossplane.io","version":"v1","resource":"configurationrevisions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ConfigurationRevision Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: pkgcrossplaneio-configurationrevision-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/pkgcrossplaneio-configurationrevision-editor/README.md b/charts/pkgcrossplaneio-configurationrevision-editor/README.md index 33563f38be..359536c4c3 100644 --- a/charts/pkgcrossplaneio-configurationrevision-editor/README.md +++ b/charts/pkgcrossplaneio-configurationrevision-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/pkgcrossplaneio-configurationrevision-editor --version=v0.23.0 -$ helm upgrade -i pkgcrossplaneio-configurationrevision-editor appscode/pkgcrossplaneio-configurationrevision-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/pkgcrossplaneio-configurationrevision-editor --version=v0.24.0 +$ helm upgrade -i pkgcrossplaneio-configurationrevision-editor appscode/pkgcrossplaneio-configurationrevision-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ConfigurationRevision Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `pkgcrossplaneio-configurationrevision-editor`: ```bash -$ helm upgrade -i pkgcrossplaneio-configurationrevision-editor appscode/pkgcrossplaneio-configurationrevision-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i pkgcrossplaneio-configurationrevision-editor appscode/pkgcrossplaneio-configurationrevision-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ConfigurationRevision Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `pkgcrossplaneio-co Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-configurationrevision-editor appscode/pkgcrossplaneio-configurationrevision-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=pkg.crossplane.io/v1 +$ helm upgrade -i pkgcrossplaneio-configurationrevision-editor appscode/pkgcrossplaneio-configurationrevision-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=pkg.crossplane.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-configurationrevision-editor appscode/pkgcrossplaneio-configurationrevision-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i pkgcrossplaneio-configurationrevision-editor appscode/pkgcrossplaneio-configurationrevision-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/pkgcrossplaneio-controllerconfig-editor/Chart.yaml b/charts/pkgcrossplaneio-controllerconfig-editor/Chart.yaml index 7118b03601..4c45792690 100644 --- a/charts/pkgcrossplaneio-controllerconfig-editor/Chart.yaml +++ b/charts/pkgcrossplaneio-controllerconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"pkg.crossplane.io","version":"v1alpha1","resource":"controllerconfigs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ControllerConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: pkgcrossplaneio-controllerconfig-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/pkgcrossplaneio-controllerconfig-editor/README.md b/charts/pkgcrossplaneio-controllerconfig-editor/README.md index ca74e8bccc..55312387e8 100644 --- a/charts/pkgcrossplaneio-controllerconfig-editor/README.md +++ b/charts/pkgcrossplaneio-controllerconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/pkgcrossplaneio-controllerconfig-editor --version=v0.23.0 -$ helm upgrade -i pkgcrossplaneio-controllerconfig-editor appscode/pkgcrossplaneio-controllerconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/pkgcrossplaneio-controllerconfig-editor --version=v0.24.0 +$ helm upgrade -i pkgcrossplaneio-controllerconfig-editor appscode/pkgcrossplaneio-controllerconfig-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ControllerConfig Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `pkgcrossplaneio-controllerconfig-editor`: ```bash -$ helm upgrade -i pkgcrossplaneio-controllerconfig-editor appscode/pkgcrossplaneio-controllerconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i pkgcrossplaneio-controllerconfig-editor appscode/pkgcrossplaneio-controllerconfig-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ControllerConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `pkgcrossplaneio-co Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-controllerconfig-editor appscode/pkgcrossplaneio-controllerconfig-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=pkg.crossplane.io/v1alpha1 +$ helm upgrade -i pkgcrossplaneio-controllerconfig-editor appscode/pkgcrossplaneio-controllerconfig-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=pkg.crossplane.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-controllerconfig-editor appscode/pkgcrossplaneio-controllerconfig-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i pkgcrossplaneio-controllerconfig-editor appscode/pkgcrossplaneio-controllerconfig-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/pkgcrossplaneio-lock-editor/Chart.yaml b/charts/pkgcrossplaneio-lock-editor/Chart.yaml index 3ad541b611..17813ca6c9 100644 --- a/charts/pkgcrossplaneio-lock-editor/Chart.yaml +++ b/charts/pkgcrossplaneio-lock-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"pkg.crossplane.io","version":"v1beta1","resource":"locks"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Lock Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: pkgcrossplaneio-lock-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/pkgcrossplaneio-lock-editor/README.md b/charts/pkgcrossplaneio-lock-editor/README.md index f06cc5120c..55eff29bbe 100644 --- a/charts/pkgcrossplaneio-lock-editor/README.md +++ b/charts/pkgcrossplaneio-lock-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/pkgcrossplaneio-lock-editor --version=v0.23.0 -$ helm upgrade -i pkgcrossplaneio-lock-editor appscode/pkgcrossplaneio-lock-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/pkgcrossplaneio-lock-editor --version=v0.24.0 +$ helm upgrade -i pkgcrossplaneio-lock-editor appscode/pkgcrossplaneio-lock-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Lock Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `pkgcrossplaneio-lock-editor`: ```bash -$ helm upgrade -i pkgcrossplaneio-lock-editor appscode/pkgcrossplaneio-lock-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i pkgcrossplaneio-lock-editor appscode/pkgcrossplaneio-lock-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Lock Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `pkgcrossplaneio-lo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-lock-editor appscode/pkgcrossplaneio-lock-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=pkg.crossplane.io/v1beta1 +$ helm upgrade -i pkgcrossplaneio-lock-editor appscode/pkgcrossplaneio-lock-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=pkg.crossplane.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-lock-editor appscode/pkgcrossplaneio-lock-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i pkgcrossplaneio-lock-editor appscode/pkgcrossplaneio-lock-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/pkgcrossplaneio-provider-editor/Chart.yaml b/charts/pkgcrossplaneio-provider-editor/Chart.yaml index df1da874e9..4fed169671 100644 --- a/charts/pkgcrossplaneio-provider-editor/Chart.yaml +++ b/charts/pkgcrossplaneio-provider-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"pkg.crossplane.io","version":"v1","resource":"providers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Provider Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: pkgcrossplaneio-provider-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/pkgcrossplaneio-provider-editor/README.md b/charts/pkgcrossplaneio-provider-editor/README.md index efcd72c036..b66d9f1126 100644 --- a/charts/pkgcrossplaneio-provider-editor/README.md +++ b/charts/pkgcrossplaneio-provider-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/pkgcrossplaneio-provider-editor --version=v0.23.0 -$ helm upgrade -i pkgcrossplaneio-provider-editor appscode/pkgcrossplaneio-provider-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/pkgcrossplaneio-provider-editor --version=v0.24.0 +$ helm upgrade -i pkgcrossplaneio-provider-editor appscode/pkgcrossplaneio-provider-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Provider Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `pkgcrossplaneio-provider-editor`: ```bash -$ helm upgrade -i pkgcrossplaneio-provider-editor appscode/pkgcrossplaneio-provider-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i pkgcrossplaneio-provider-editor appscode/pkgcrossplaneio-provider-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Provider Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `pkgcrossplaneio-pr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-provider-editor appscode/pkgcrossplaneio-provider-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=pkg.crossplane.io/v1 +$ helm upgrade -i pkgcrossplaneio-provider-editor appscode/pkgcrossplaneio-provider-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=pkg.crossplane.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-provider-editor appscode/pkgcrossplaneio-provider-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i pkgcrossplaneio-provider-editor appscode/pkgcrossplaneio-provider-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/pkgcrossplaneio-providerrevision-editor/Chart.yaml b/charts/pkgcrossplaneio-providerrevision-editor/Chart.yaml index 72f865fe00..089efdab2c 100644 --- a/charts/pkgcrossplaneio-providerrevision-editor/Chart.yaml +++ b/charts/pkgcrossplaneio-providerrevision-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"pkg.crossplane.io","version":"v1","resource":"providerrevisions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProviderRevision Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: pkgcrossplaneio-providerrevision-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/pkgcrossplaneio-providerrevision-editor/README.md b/charts/pkgcrossplaneio-providerrevision-editor/README.md index 0d11950562..5f1dea7b69 100644 --- a/charts/pkgcrossplaneio-providerrevision-editor/README.md +++ b/charts/pkgcrossplaneio-providerrevision-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/pkgcrossplaneio-providerrevision-editor --version=v0.23.0 -$ helm upgrade -i pkgcrossplaneio-providerrevision-editor appscode/pkgcrossplaneio-providerrevision-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/pkgcrossplaneio-providerrevision-editor --version=v0.24.0 +$ helm upgrade -i pkgcrossplaneio-providerrevision-editor appscode/pkgcrossplaneio-providerrevision-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProviderRevision Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `pkgcrossplaneio-providerrevision-editor`: ```bash -$ helm upgrade -i pkgcrossplaneio-providerrevision-editor appscode/pkgcrossplaneio-providerrevision-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i pkgcrossplaneio-providerrevision-editor appscode/pkgcrossplaneio-providerrevision-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProviderRevision Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `pkgcrossplaneio-pr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-providerrevision-editor appscode/pkgcrossplaneio-providerrevision-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=pkg.crossplane.io/v1 +$ helm upgrade -i pkgcrossplaneio-providerrevision-editor appscode/pkgcrossplaneio-providerrevision-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=pkg.crossplane.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i pkgcrossplaneio-providerrevision-editor appscode/pkgcrossplaneio-providerrevision-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i pkgcrossplaneio-providerrevision-editor appscode/pkgcrossplaneio-providerrevision-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/policy-eviction-editor/Chart.yaml b/charts/policy-eviction-editor/Chart.yaml index 834d4e6e2d..330c86884a 100644 --- a/charts/policy-eviction-editor/Chart.yaml +++ b/charts/policy-eviction-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"policy","version":"v1","resource":"evictions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Eviction Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: policy-eviction-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/policy-eviction-editor/README.md b/charts/policy-eviction-editor/README.md index f59610e1fb..f79d489c64 100644 --- a/charts/policy-eviction-editor/README.md +++ b/charts/policy-eviction-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/policy-eviction-editor --version=v0.23.0 -$ helm upgrade -i policy-eviction-editor appscode/policy-eviction-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/policy-eviction-editor --version=v0.24.0 +$ helm upgrade -i policy-eviction-editor appscode/policy-eviction-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Eviction Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `policy-eviction-editor`: ```bash -$ helm upgrade -i policy-eviction-editor appscode/policy-eviction-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i policy-eviction-editor appscode/policy-eviction-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Eviction Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `policy-eviction-ed Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i policy-eviction-editor appscode/policy-eviction-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=policy/v1 +$ helm upgrade -i policy-eviction-editor appscode/policy-eviction-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=policy/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i policy-eviction-editor appscode/policy-eviction-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i policy-eviction-editor appscode/policy-eviction-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/policy-poddisruptionbudget-editor/Chart.yaml b/charts/policy-poddisruptionbudget-editor/Chart.yaml index fa54088c50..f932b27264 100644 --- a/charts/policy-poddisruptionbudget-editor/Chart.yaml +++ b/charts/policy-poddisruptionbudget-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"policy","version":"v1","resource":"poddisruptionbudgets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PodDisruptionBudget Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: policy-poddisruptionbudget-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/policy-poddisruptionbudget-editor/README.md b/charts/policy-poddisruptionbudget-editor/README.md index 57e227cc94..884d2469b1 100644 --- a/charts/policy-poddisruptionbudget-editor/README.md +++ b/charts/policy-poddisruptionbudget-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/policy-poddisruptionbudget-editor --version=v0.23.0 -$ helm upgrade -i policy-poddisruptionbudget-editor appscode/policy-poddisruptionbudget-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/policy-poddisruptionbudget-editor --version=v0.24.0 +$ helm upgrade -i policy-poddisruptionbudget-editor appscode/policy-poddisruptionbudget-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PodDisruptionBudget Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `policy-poddisruptionbudget-editor`: ```bash -$ helm upgrade -i policy-poddisruptionbudget-editor appscode/policy-poddisruptionbudget-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i policy-poddisruptionbudget-editor appscode/policy-poddisruptionbudget-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PodDisruptionBudget Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `policy-poddisrupti Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i policy-poddisruptionbudget-editor appscode/policy-poddisruptionbudget-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=policy/v1 +$ helm upgrade -i policy-poddisruptionbudget-editor appscode/policy-poddisruptionbudget-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=policy/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i policy-poddisruptionbudget-editor appscode/policy-poddisruptionbudget-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i policy-poddisruptionbudget-editor appscode/policy-poddisruptionbudget-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/policy-podsecuritypolicy-editor/Chart.yaml b/charts/policy-podsecuritypolicy-editor/Chart.yaml index 0267c53d80..bc222b81e8 100644 --- a/charts/policy-podsecuritypolicy-editor/Chart.yaml +++ b/charts/policy-podsecuritypolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"policy","version":"v1beta1","resource":"podsecuritypolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PodSecurityPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: policy-podsecuritypolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/policy-podsecuritypolicy-editor/README.md b/charts/policy-podsecuritypolicy-editor/README.md index b85a25b5ef..d9da7d9dec 100644 --- a/charts/policy-podsecuritypolicy-editor/README.md +++ b/charts/policy-podsecuritypolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/policy-podsecuritypolicy-editor --version=v0.23.0 -$ helm upgrade -i policy-podsecuritypolicy-editor appscode/policy-podsecuritypolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/policy-podsecuritypolicy-editor --version=v0.24.0 +$ helm upgrade -i policy-podsecuritypolicy-editor appscode/policy-podsecuritypolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PodSecurityPolicy Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `policy-podsecuritypolicy-editor`: ```bash -$ helm upgrade -i policy-podsecuritypolicy-editor appscode/policy-podsecuritypolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i policy-podsecuritypolicy-editor appscode/policy-podsecuritypolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PodSecurityPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `policy-podsecurity Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i policy-podsecuritypolicy-editor appscode/policy-podsecuritypolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=policy/v1beta1 +$ helm upgrade -i policy-podsecuritypolicy-editor appscode/policy-podsecuritypolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=policy/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i policy-podsecuritypolicy-editor appscode/policy-podsecuritypolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i policy-podsecuritypolicy-editor appscode/policy-podsecuritypolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/policykubevaultcom-vaultpolicy-editor/Chart.yaml b/charts/policykubevaultcom-vaultpolicy-editor/Chart.yaml index 5326b43da7..54d421f3d2 100644 --- a/charts/policykubevaultcom-vaultpolicy-editor/Chart.yaml +++ b/charts/policykubevaultcom-vaultpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"policy.kubevault.com","version":"v1alpha1","resource":"vaultpolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VaultPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: policykubevaultcom-vaultpolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/policykubevaultcom-vaultpolicy-editor/README.md b/charts/policykubevaultcom-vaultpolicy-editor/README.md index a893a45b75..8c1a66a598 100644 --- a/charts/policykubevaultcom-vaultpolicy-editor/README.md +++ b/charts/policykubevaultcom-vaultpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/policykubevaultcom-vaultpolicy-editor --version=v0.23.0 -$ helm upgrade -i policykubevaultcom-vaultpolicy-editor appscode/policykubevaultcom-vaultpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/policykubevaultcom-vaultpolicy-editor --version=v0.24.0 +$ helm upgrade -i policykubevaultcom-vaultpolicy-editor appscode/policykubevaultcom-vaultpolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VaultPolicy Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `policykubevaultcom-vaultpolicy-editor`: ```bash -$ helm upgrade -i policykubevaultcom-vaultpolicy-editor appscode/policykubevaultcom-vaultpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i policykubevaultcom-vaultpolicy-editor appscode/policykubevaultcom-vaultpolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VaultPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `policykubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i policykubevaultcom-vaultpolicy-editor appscode/policykubevaultcom-vaultpolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=policy.kubevault.com/v1alpha1 +$ helm upgrade -i policykubevaultcom-vaultpolicy-editor appscode/policykubevaultcom-vaultpolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=policy.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i policykubevaultcom-vaultpolicy-editor appscode/policykubevaultcom-vaultpolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i policykubevaultcom-vaultpolicy-editor appscode/policykubevaultcom-vaultpolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/policykubevaultcom-vaultpolicybinding-editor/Chart.yaml b/charts/policykubevaultcom-vaultpolicybinding-editor/Chart.yaml index c8e7e7454e..1b85806a31 100644 --- a/charts/policykubevaultcom-vaultpolicybinding-editor/Chart.yaml +++ b/charts/policykubevaultcom-vaultpolicybinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"policy.kubevault.com","version":"v1alpha1","resource":"vaultpolicybindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VaultPolicyBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: policykubevaultcom-vaultpolicybinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/policykubevaultcom-vaultpolicybinding-editor/README.md b/charts/policykubevaultcom-vaultpolicybinding-editor/README.md index 1076e6df14..20ddf30a81 100644 --- a/charts/policykubevaultcom-vaultpolicybinding-editor/README.md +++ b/charts/policykubevaultcom-vaultpolicybinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/policykubevaultcom-vaultpolicybinding-editor --version=v0.23.0 -$ helm upgrade -i policykubevaultcom-vaultpolicybinding-editor appscode/policykubevaultcom-vaultpolicybinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/policykubevaultcom-vaultpolicybinding-editor --version=v0.24.0 +$ helm upgrade -i policykubevaultcom-vaultpolicybinding-editor appscode/policykubevaultcom-vaultpolicybinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VaultPolicyBinding Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `policykubevaultcom-vaultpolicybinding-editor`: ```bash -$ helm upgrade -i policykubevaultcom-vaultpolicybinding-editor appscode/policykubevaultcom-vaultpolicybinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i policykubevaultcom-vaultpolicybinding-editor appscode/policykubevaultcom-vaultpolicybinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VaultPolicyBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `policykubevaultcom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i policykubevaultcom-vaultpolicybinding-editor appscode/policykubevaultcom-vaultpolicybinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=policy.kubevault.com/v1alpha1 +$ helm upgrade -i policykubevaultcom-vaultpolicybinding-editor appscode/policykubevaultcom-vaultpolicybinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=policy.kubevault.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i policykubevaultcom-vaultpolicybinding-editor appscode/policykubevaultcom-vaultpolicybinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i policykubevaultcom-vaultpolicybinding-editor appscode/policykubevaultcom-vaultpolicybinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/postgreskubedbcom-publisher-editor/Chart.yaml b/charts/postgreskubedbcom-publisher-editor/Chart.yaml index c6b8c11780..e45c17360c 100644 --- a/charts/postgreskubedbcom-publisher-editor/Chart.yaml +++ b/charts/postgreskubedbcom-publisher-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"postgres.kubedb.com","version":"v1alpha1","resource":"publishers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Publisher Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: postgreskubedbcom-publisher-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/postgreskubedbcom-publisher-editor/README.md b/charts/postgreskubedbcom-publisher-editor/README.md index 20fb630eb8..4c2f06e3f2 100644 --- a/charts/postgreskubedbcom-publisher-editor/README.md +++ b/charts/postgreskubedbcom-publisher-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/postgreskubedbcom-publisher-editor --version=v0.23.0 -$ helm upgrade -i postgreskubedbcom-publisher-editor appscode/postgreskubedbcom-publisher-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/postgreskubedbcom-publisher-editor --version=v0.24.0 +$ helm upgrade -i postgreskubedbcom-publisher-editor appscode/postgreskubedbcom-publisher-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Publisher Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `postgreskubedbcom-publisher-editor`: ```bash -$ helm upgrade -i postgreskubedbcom-publisher-editor appscode/postgreskubedbcom-publisher-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i postgreskubedbcom-publisher-editor appscode/postgreskubedbcom-publisher-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Publisher Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `postgreskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i postgreskubedbcom-publisher-editor appscode/postgreskubedbcom-publisher-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=postgres.kubedb.com/v1alpha1 +$ helm upgrade -i postgreskubedbcom-publisher-editor appscode/postgreskubedbcom-publisher-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=postgres.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i postgreskubedbcom-publisher-editor appscode/postgreskubedbcom-publisher-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i postgreskubedbcom-publisher-editor appscode/postgreskubedbcom-publisher-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/postgreskubedbcom-subscriber-editor/Chart.yaml b/charts/postgreskubedbcom-subscriber-editor/Chart.yaml index 3b8268dddf..9522364848 100644 --- a/charts/postgreskubedbcom-subscriber-editor/Chart.yaml +++ b/charts/postgreskubedbcom-subscriber-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"postgres.kubedb.com","version":"v1alpha1","resource":"subscribers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Subscriber Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: postgreskubedbcom-subscriber-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/postgreskubedbcom-subscriber-editor/README.md b/charts/postgreskubedbcom-subscriber-editor/README.md index 45d3045a76..609e45b363 100644 --- a/charts/postgreskubedbcom-subscriber-editor/README.md +++ b/charts/postgreskubedbcom-subscriber-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/postgreskubedbcom-subscriber-editor --version=v0.23.0 -$ helm upgrade -i postgreskubedbcom-subscriber-editor appscode/postgreskubedbcom-subscriber-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/postgreskubedbcom-subscriber-editor --version=v0.24.0 +$ helm upgrade -i postgreskubedbcom-subscriber-editor appscode/postgreskubedbcom-subscriber-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Subscriber Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `postgreskubedbcom-subscriber-editor`: ```bash -$ helm upgrade -i postgreskubedbcom-subscriber-editor appscode/postgreskubedbcom-subscriber-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i postgreskubedbcom-subscriber-editor appscode/postgreskubedbcom-subscriber-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Subscriber Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `postgreskubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i postgreskubedbcom-subscriber-editor appscode/postgreskubedbcom-subscriber-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=postgres.kubedb.com/v1alpha1 +$ helm upgrade -i postgreskubedbcom-subscriber-editor appscode/postgreskubedbcom-subscriber-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=postgres.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i postgreskubedbcom-subscriber-editor appscode/postgreskubedbcom-subscriber-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i postgreskubedbcom-subscriber-editor appscode/postgreskubedbcom-subscriber-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/productsxhelmdev-plan-editor/Chart.yaml b/charts/productsxhelmdev-plan-editor/Chart.yaml index 01d58d39ec..5bd1cfc499 100644 --- a/charts/productsxhelmdev-plan-editor/Chart.yaml +++ b/charts/productsxhelmdev-plan-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"products.x-helm.dev","version":"v1alpha1","resource":"plans"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Plan Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: productsxhelmdev-plan-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/productsxhelmdev-plan-editor/README.md b/charts/productsxhelmdev-plan-editor/README.md index fa212eece2..2c4dfa1e62 100644 --- a/charts/productsxhelmdev-plan-editor/README.md +++ b/charts/productsxhelmdev-plan-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/productsxhelmdev-plan-editor --version=v0.23.0 -$ helm upgrade -i productsxhelmdev-plan-editor appscode/productsxhelmdev-plan-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/productsxhelmdev-plan-editor --version=v0.24.0 +$ helm upgrade -i productsxhelmdev-plan-editor appscode/productsxhelmdev-plan-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Plan Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `productsxhelmdev-plan-editor`: ```bash -$ helm upgrade -i productsxhelmdev-plan-editor appscode/productsxhelmdev-plan-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i productsxhelmdev-plan-editor appscode/productsxhelmdev-plan-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Plan Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `productsxhelmdev-p Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i productsxhelmdev-plan-editor appscode/productsxhelmdev-plan-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=products.x-helm.dev/v1alpha1 +$ helm upgrade -i productsxhelmdev-plan-editor appscode/productsxhelmdev-plan-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=products.x-helm.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i productsxhelmdev-plan-editor appscode/productsxhelmdev-plan-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i productsxhelmdev-plan-editor appscode/productsxhelmdev-plan-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/productsxhelmdev-product-editor/Chart.yaml b/charts/productsxhelmdev-product-editor/Chart.yaml index c05a4d4cf8..3f612b93cc 100644 --- a/charts/productsxhelmdev-product-editor/Chart.yaml +++ b/charts/productsxhelmdev-product-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"products.x-helm.dev","version":"v1alpha1","resource":"products"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Product Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: productsxhelmdev-product-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/productsxhelmdev-product-editor/README.md b/charts/productsxhelmdev-product-editor/README.md index dbadeb2372..e32171e7a4 100644 --- a/charts/productsxhelmdev-product-editor/README.md +++ b/charts/productsxhelmdev-product-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/productsxhelmdev-product-editor --version=v0.23.0 -$ helm upgrade -i productsxhelmdev-product-editor appscode/productsxhelmdev-product-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/productsxhelmdev-product-editor --version=v0.24.0 +$ helm upgrade -i productsxhelmdev-product-editor appscode/productsxhelmdev-product-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Product Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `productsxhelmdev-product-editor`: ```bash -$ helm upgrade -i productsxhelmdev-product-editor appscode/productsxhelmdev-product-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i productsxhelmdev-product-editor appscode/productsxhelmdev-product-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Product Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `productsxhelmdev-p Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i productsxhelmdev-product-editor appscode/productsxhelmdev-product-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=products.x-helm.dev/v1alpha1 +$ helm upgrade -i productsxhelmdev-product-editor appscode/productsxhelmdev-product-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=products.x-helm.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i productsxhelmdev-product-editor appscode/productsxhelmdev-product-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i productsxhelmdev-product-editor appscode/productsxhelmdev-product-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/projectopenshiftio-project-editor/Chart.yaml b/charts/projectopenshiftio-project-editor/Chart.yaml index 0f6d6229f1..6189071803 100644 --- a/charts/projectopenshiftio-project-editor/Chart.yaml +++ b/charts/projectopenshiftio-project-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"project.openshift.io","version":"v1","resource":"projects"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Project Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: projectopenshiftio-project-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/projectopenshiftio-project-editor/README.md b/charts/projectopenshiftio-project-editor/README.md index aea04adb5c..4c59e5c6e4 100644 --- a/charts/projectopenshiftio-project-editor/README.md +++ b/charts/projectopenshiftio-project-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/projectopenshiftio-project-editor --version=v0.23.0 -$ helm upgrade -i projectopenshiftio-project-editor appscode/projectopenshiftio-project-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/projectopenshiftio-project-editor --version=v0.24.0 +$ helm upgrade -i projectopenshiftio-project-editor appscode/projectopenshiftio-project-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Project Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `projectopenshiftio-project-editor`: ```bash -$ helm upgrade -i projectopenshiftio-project-editor appscode/projectopenshiftio-project-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i projectopenshiftio-project-editor appscode/projectopenshiftio-project-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Project Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `projectopenshiftio Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i projectopenshiftio-project-editor appscode/projectopenshiftio-project-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=project.openshift.io/v1 +$ helm upgrade -i projectopenshiftio-project-editor appscode/projectopenshiftio-project-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=project.openshift.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i projectopenshiftio-project-editor appscode/projectopenshiftio-project-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i projectopenshiftio-project-editor appscode/projectopenshiftio-project-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/proxyopenclustermanagementio-managedproxyconfiguration-editor/Chart.yaml b/charts/proxyopenclustermanagementio-managedproxyconfiguration-editor/Chart.yaml index d0f3943428..3d9c40c6a8 100644 --- a/charts/proxyopenclustermanagementio-managedproxyconfiguration-editor/Chart.yaml +++ b/charts/proxyopenclustermanagementio-managedproxyconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"proxy.open-cluster-management.io","version":"v1alpha1","resource":"managedproxyconfigurations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ManagedProxyConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: proxyopenclustermanagementio-managedproxyconfiguration-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/proxyopenclustermanagementio-managedproxyconfiguration-editor/README.md b/charts/proxyopenclustermanagementio-managedproxyconfiguration-editor/README.md index 6b476d9ad3..28a75336e1 100644 --- a/charts/proxyopenclustermanagementio-managedproxyconfiguration-editor/README.md +++ b/charts/proxyopenclustermanagementio-managedproxyconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor --version=v0.23.0 -$ helm upgrade -i proxyopenclustermanagementio-managedproxyconfiguration-editor appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor --version=v0.24.0 +$ helm upgrade -i proxyopenclustermanagementio-managedproxyconfiguration-editor appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedProxyConfiguration Editor on a [Kubernetes](http://k To install/upgrade the chart with the release name `proxyopenclustermanagementio-managedproxyconfiguration-editor`: ```bash -$ helm upgrade -i proxyopenclustermanagementio-managedproxyconfiguration-editor appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i proxyopenclustermanagementio-managedproxyconfiguration-editor appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ManagedProxyConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `proxyopenclusterma Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i proxyopenclustermanagementio-managedproxyconfiguration-editor appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=proxy.open-cluster-management.io/v1alpha1 +$ helm upgrade -i proxyopenclustermanagementio-managedproxyconfiguration-editor appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=proxy.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i proxyopenclustermanagementio-managedproxyconfiguration-editor appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i proxyopenclustermanagementio-managedproxyconfiguration-editor appscode/proxyopenclustermanagementio-managedproxyconfiguration-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/proxyopenclustermanagementio-managedproxyserviceresolver-editor/Chart.yaml b/charts/proxyopenclustermanagementio-managedproxyserviceresolver-editor/Chart.yaml index 23f052f6c7..065ad7f49f 100644 --- a/charts/proxyopenclustermanagementio-managedproxyserviceresolver-editor/Chart.yaml +++ b/charts/proxyopenclustermanagementio-managedproxyserviceresolver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"proxy.open-cluster-management.io","version":"v1alpha1","resource":"managedproxyserviceresolvers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ManagedProxyServiceResolver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: proxyopenclustermanagementio-managedproxyserviceresolver-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/proxyopenclustermanagementio-managedproxyserviceresolver-editor/README.md b/charts/proxyopenclustermanagementio-managedproxyserviceresolver-editor/README.md index cff4d92f9c..4c2321b8a8 100644 --- a/charts/proxyopenclustermanagementio-managedproxyserviceresolver-editor/README.md +++ b/charts/proxyopenclustermanagementio-managedproxyserviceresolver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor --version=v0.23.0 -$ helm upgrade -i proxyopenclustermanagementio-managedproxyserviceresolver-editor appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor --version=v0.24.0 +$ helm upgrade -i proxyopenclustermanagementio-managedproxyserviceresolver-editor appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManagedProxyServiceResolver Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `proxyopenclustermanagementio-managedproxyserviceresolver-editor`: ```bash -$ helm upgrade -i proxyopenclustermanagementio-managedproxyserviceresolver-editor appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i proxyopenclustermanagementio-managedproxyserviceresolver-editor appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ManagedProxyServiceResolver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `proxyopenclusterma Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i proxyopenclustermanagementio-managedproxyserviceresolver-editor appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=proxy.open-cluster-management.io/v1alpha1 +$ helm upgrade -i proxyopenclustermanagementio-managedproxyserviceresolver-editor appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=proxy.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i proxyopenclustermanagementio-managedproxyserviceresolver-editor appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i proxyopenclustermanagementio-managedproxyserviceresolver-editor appscode/proxyopenclustermanagementio-managedproxyserviceresolver-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rbacauthorizationk8sio-clusterrole-editor/Chart.yaml b/charts/rbacauthorizationk8sio-clusterrole-editor/Chart.yaml index b46db786a3..e4537c252b 100644 --- a/charts/rbacauthorizationk8sio-clusterrole-editor/Chart.yaml +++ b/charts/rbacauthorizationk8sio-clusterrole-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rbac.authorization.k8s.io","version":"v1","resource":"clusterroles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterRole Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rbacauthorizationk8sio-clusterrole-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rbacauthorizationk8sio-clusterrole-editor/README.md b/charts/rbacauthorizationk8sio-clusterrole-editor/README.md index 6c2337358b..b7bd6eeb5a 100644 --- a/charts/rbacauthorizationk8sio-clusterrole-editor/README.md +++ b/charts/rbacauthorizationk8sio-clusterrole-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rbacauthorizationk8sio-clusterrole-editor --version=v0.23.0 -$ helm upgrade -i rbacauthorizationk8sio-clusterrole-editor appscode/rbacauthorizationk8sio-clusterrole-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rbacauthorizationk8sio-clusterrole-editor --version=v0.24.0 +$ helm upgrade -i rbacauthorizationk8sio-clusterrole-editor appscode/rbacauthorizationk8sio-clusterrole-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterRole Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `rbacauthorizationk8sio-clusterrole-editor`: ```bash -$ helm upgrade -i rbacauthorizationk8sio-clusterrole-editor appscode/rbacauthorizationk8sio-clusterrole-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rbacauthorizationk8sio-clusterrole-editor appscode/rbacauthorizationk8sio-clusterrole-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterRole Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rbacauthorizationk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rbacauthorizationk8sio-clusterrole-editor appscode/rbacauthorizationk8sio-clusterrole-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rbac.authorization.k8s.io/v1 +$ helm upgrade -i rbacauthorizationk8sio-clusterrole-editor appscode/rbacauthorizationk8sio-clusterrole-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rbac.authorization.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rbacauthorizationk8sio-clusterrole-editor appscode/rbacauthorizationk8sio-clusterrole-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rbacauthorizationk8sio-clusterrole-editor appscode/rbacauthorizationk8sio-clusterrole-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rbacauthorizationk8sio-clusterrolebinding-editor/Chart.yaml b/charts/rbacauthorizationk8sio-clusterrolebinding-editor/Chart.yaml index 0f89267e77..4a752b0423 100644 --- a/charts/rbacauthorizationk8sio-clusterrolebinding-editor/Chart.yaml +++ b/charts/rbacauthorizationk8sio-clusterrolebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rbac.authorization.k8s.io","version":"v1","resource":"clusterrolebindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterRoleBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rbacauthorizationk8sio-clusterrolebinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rbacauthorizationk8sio-clusterrolebinding-editor/README.md b/charts/rbacauthorizationk8sio-clusterrolebinding-editor/README.md index 47ab598315..2479c70c95 100644 --- a/charts/rbacauthorizationk8sio-clusterrolebinding-editor/README.md +++ b/charts/rbacauthorizationk8sio-clusterrolebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rbacauthorizationk8sio-clusterrolebinding-editor --version=v0.23.0 -$ helm upgrade -i rbacauthorizationk8sio-clusterrolebinding-editor appscode/rbacauthorizationk8sio-clusterrolebinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rbacauthorizationk8sio-clusterrolebinding-editor --version=v0.24.0 +$ helm upgrade -i rbacauthorizationk8sio-clusterrolebinding-editor appscode/rbacauthorizationk8sio-clusterrolebinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterRoleBinding Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `rbacauthorizationk8sio-clusterrolebinding-editor`: ```bash -$ helm upgrade -i rbacauthorizationk8sio-clusterrolebinding-editor appscode/rbacauthorizationk8sio-clusterrolebinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rbacauthorizationk8sio-clusterrolebinding-editor appscode/rbacauthorizationk8sio-clusterrolebinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterRoleBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rbacauthorizationk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rbacauthorizationk8sio-clusterrolebinding-editor appscode/rbacauthorizationk8sio-clusterrolebinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rbac.authorization.k8s.io/v1 +$ helm upgrade -i rbacauthorizationk8sio-clusterrolebinding-editor appscode/rbacauthorizationk8sio-clusterrolebinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rbac.authorization.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rbacauthorizationk8sio-clusterrolebinding-editor appscode/rbacauthorizationk8sio-clusterrolebinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rbacauthorizationk8sio-clusterrolebinding-editor appscode/rbacauthorizationk8sio-clusterrolebinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rbacauthorizationk8sio-role-editor/Chart.yaml b/charts/rbacauthorizationk8sio-role-editor/Chart.yaml index e474adbfff..bfaec78add 100644 --- a/charts/rbacauthorizationk8sio-role-editor/Chart.yaml +++ b/charts/rbacauthorizationk8sio-role-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rbac.authorization.k8s.io","version":"v1","resource":"roles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Role Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rbacauthorizationk8sio-role-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rbacauthorizationk8sio-role-editor/README.md b/charts/rbacauthorizationk8sio-role-editor/README.md index ab25fa48fa..aab9ff1963 100644 --- a/charts/rbacauthorizationk8sio-role-editor/README.md +++ b/charts/rbacauthorizationk8sio-role-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rbacauthorizationk8sio-role-editor --version=v0.23.0 -$ helm upgrade -i rbacauthorizationk8sio-role-editor appscode/rbacauthorizationk8sio-role-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rbacauthorizationk8sio-role-editor --version=v0.24.0 +$ helm upgrade -i rbacauthorizationk8sio-role-editor appscode/rbacauthorizationk8sio-role-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Role Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `rbacauthorizationk8sio-role-editor`: ```bash -$ helm upgrade -i rbacauthorizationk8sio-role-editor appscode/rbacauthorizationk8sio-role-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rbacauthorizationk8sio-role-editor appscode/rbacauthorizationk8sio-role-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Role Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rbacauthorizationk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rbacauthorizationk8sio-role-editor appscode/rbacauthorizationk8sio-role-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rbac.authorization.k8s.io/v1 +$ helm upgrade -i rbacauthorizationk8sio-role-editor appscode/rbacauthorizationk8sio-role-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rbac.authorization.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rbacauthorizationk8sio-role-editor appscode/rbacauthorizationk8sio-role-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rbacauthorizationk8sio-role-editor appscode/rbacauthorizationk8sio-role-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rbacauthorizationk8sio-rolebinding-editor/Chart.yaml b/charts/rbacauthorizationk8sio-rolebinding-editor/Chart.yaml index 0b10b4fd2e..6f287e477e 100644 --- a/charts/rbacauthorizationk8sio-rolebinding-editor/Chart.yaml +++ b/charts/rbacauthorizationk8sio-rolebinding-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rbac.authorization.k8s.io","version":"v1","resource":"rolebindings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RoleBinding Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rbacauthorizationk8sio-rolebinding-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rbacauthorizationk8sio-rolebinding-editor/README.md b/charts/rbacauthorizationk8sio-rolebinding-editor/README.md index d66a46f125..5ed5245050 100644 --- a/charts/rbacauthorizationk8sio-rolebinding-editor/README.md +++ b/charts/rbacauthorizationk8sio-rolebinding-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rbacauthorizationk8sio-rolebinding-editor --version=v0.23.0 -$ helm upgrade -i rbacauthorizationk8sio-rolebinding-editor appscode/rbacauthorizationk8sio-rolebinding-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rbacauthorizationk8sio-rolebinding-editor --version=v0.24.0 +$ helm upgrade -i rbacauthorizationk8sio-rolebinding-editor appscode/rbacauthorizationk8sio-rolebinding-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RoleBinding Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `rbacauthorizationk8sio-rolebinding-editor`: ```bash -$ helm upgrade -i rbacauthorizationk8sio-rolebinding-editor appscode/rbacauthorizationk8sio-rolebinding-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rbacauthorizationk8sio-rolebinding-editor appscode/rbacauthorizationk8sio-rolebinding-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RoleBinding Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rbacauthorizationk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rbacauthorizationk8sio-rolebinding-editor appscode/rbacauthorizationk8sio-rolebinding-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rbac.authorization.k8s.io/v1 +$ helm upgrade -i rbacauthorizationk8sio-rolebinding-editor appscode/rbacauthorizationk8sio-rolebinding-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rbac.authorization.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rbacauthorizationk8sio-rolebinding-editor appscode/rbacauthorizationk8sio-rolebinding-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rbacauthorizationk8sio-rolebinding-editor appscode/rbacauthorizationk8sio-rolebinding-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-cluster-editor/Chart.yaml b/charts/rdsawskubedbcom-cluster-editor/Chart.yaml index 729200ab9e..e03991964a 100644 --- a/charts/rdsawskubedbcom-cluster-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-cluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"clusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Cluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-cluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-cluster-editor/README.md b/charts/rdsawskubedbcom-cluster-editor/README.md index 11f9db5252..a5c9fd3cb6 100644 --- a/charts/rdsawskubedbcom-cluster-editor/README.md +++ b/charts/rdsawskubedbcom-cluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-cluster-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-cluster-editor appscode/rdsawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-cluster-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-cluster-editor appscode/rdsawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Cluster Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `rdsawskubedbcom-cluster-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-cluster-editor appscode/rdsawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-cluster-editor appscode/rdsawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Cluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-cl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-cluster-editor appscode/rdsawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-cluster-editor appscode/rdsawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-cluster-editor appscode/rdsawskubedbcom-cluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-cluster-editor appscode/rdsawskubedbcom-cluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-clusteractivitystream-editor/Chart.yaml b/charts/rdsawskubedbcom-clusteractivitystream-editor/Chart.yaml index 07efd5d03b..040698f27a 100644 --- a/charts/rdsawskubedbcom-clusteractivitystream-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-clusteractivitystream-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"clusteractivitystreams"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterActivityStream Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-clusteractivitystream-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-clusteractivitystream-editor/README.md b/charts/rdsawskubedbcom-clusteractivitystream-editor/README.md index a9b3105c02..26c51037e6 100644 --- a/charts/rdsawskubedbcom-clusteractivitystream-editor/README.md +++ b/charts/rdsawskubedbcom-clusteractivitystream-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-clusteractivitystream-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-clusteractivitystream-editor appscode/rdsawskubedbcom-clusteractivitystream-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-clusteractivitystream-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-clusteractivitystream-editor appscode/rdsawskubedbcom-clusteractivitystream-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterActivityStream Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `rdsawskubedbcom-clusteractivitystream-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-clusteractivitystream-editor appscode/rdsawskubedbcom-clusteractivitystream-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-clusteractivitystream-editor appscode/rdsawskubedbcom-clusteractivitystream-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterActivityStream Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-cl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusteractivitystream-editor appscode/rdsawskubedbcom-clusteractivitystream-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-clusteractivitystream-editor appscode/rdsawskubedbcom-clusteractivitystream-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusteractivitystream-editor appscode/rdsawskubedbcom-clusteractivitystream-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-clusteractivitystream-editor appscode/rdsawskubedbcom-clusteractivitystream-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-clusterendpoint-editor/Chart.yaml b/charts/rdsawskubedbcom-clusterendpoint-editor/Chart.yaml index a855dffba1..d72c218883 100644 --- a/charts/rdsawskubedbcom-clusterendpoint-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-clusterendpoint-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"clusterendpoints"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterEndpoint Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-clusterendpoint-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-clusterendpoint-editor/README.md b/charts/rdsawskubedbcom-clusterendpoint-editor/README.md index 29ec15bb07..05bf07b1ec 100644 --- a/charts/rdsawskubedbcom-clusterendpoint-editor/README.md +++ b/charts/rdsawskubedbcom-clusterendpoint-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-clusterendpoint-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-clusterendpoint-editor appscode/rdsawskubedbcom-clusterendpoint-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-clusterendpoint-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-clusterendpoint-editor appscode/rdsawskubedbcom-clusterendpoint-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterEndpoint Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `rdsawskubedbcom-clusterendpoint-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterendpoint-editor appscode/rdsawskubedbcom-clusterendpoint-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-clusterendpoint-editor appscode/rdsawskubedbcom-clusterendpoint-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterEndpoint Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-cl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterendpoint-editor appscode/rdsawskubedbcom-clusterendpoint-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-clusterendpoint-editor appscode/rdsawskubedbcom-clusterendpoint-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterendpoint-editor appscode/rdsawskubedbcom-clusterendpoint-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-clusterendpoint-editor appscode/rdsawskubedbcom-clusterendpoint-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-clusterinstance-editor/Chart.yaml b/charts/rdsawskubedbcom-clusterinstance-editor/Chart.yaml index 247586572d..fe2c8b3a4b 100644 --- a/charts/rdsawskubedbcom-clusterinstance-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-clusterinstance-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"clusterinstances"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterInstance Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-clusterinstance-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-clusterinstance-editor/README.md b/charts/rdsawskubedbcom-clusterinstance-editor/README.md index d09be67da3..9756ded376 100644 --- a/charts/rdsawskubedbcom-clusterinstance-editor/README.md +++ b/charts/rdsawskubedbcom-clusterinstance-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-clusterinstance-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-clusterinstance-editor appscode/rdsawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-clusterinstance-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-clusterinstance-editor appscode/rdsawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterInstance Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `rdsawskubedbcom-clusterinstance-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterinstance-editor appscode/rdsawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-clusterinstance-editor appscode/rdsawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterInstance Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-cl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterinstance-editor appscode/rdsawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-clusterinstance-editor appscode/rdsawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterinstance-editor appscode/rdsawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-clusterinstance-editor appscode/rdsawskubedbcom-clusterinstance-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-clusterparametergroup-editor/Chart.yaml b/charts/rdsawskubedbcom-clusterparametergroup-editor/Chart.yaml index ef948188bf..cff4a89786 100644 --- a/charts/rdsawskubedbcom-clusterparametergroup-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-clusterparametergroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"clusterparametergroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterParameterGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-clusterparametergroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-clusterparametergroup-editor/README.md b/charts/rdsawskubedbcom-clusterparametergroup-editor/README.md index 6cd2a025d6..5d215deadb 100644 --- a/charts/rdsawskubedbcom-clusterparametergroup-editor/README.md +++ b/charts/rdsawskubedbcom-clusterparametergroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-clusterparametergroup-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-clusterparametergroup-editor appscode/rdsawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-clusterparametergroup-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-clusterparametergroup-editor appscode/rdsawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterParameterGroup Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `rdsawskubedbcom-clusterparametergroup-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterparametergroup-editor appscode/rdsawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-clusterparametergroup-editor appscode/rdsawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterParameterGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-cl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterparametergroup-editor appscode/rdsawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-clusterparametergroup-editor appscode/rdsawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterparametergroup-editor appscode/rdsawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-clusterparametergroup-editor appscode/rdsawskubedbcom-clusterparametergroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-clusterroleassociation-editor/Chart.yaml b/charts/rdsawskubedbcom-clusterroleassociation-editor/Chart.yaml index 1eb54953a2..c012a623bb 100644 --- a/charts/rdsawskubedbcom-clusterroleassociation-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-clusterroleassociation-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"clusterroleassociations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterRoleAssociation Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-clusterroleassociation-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-clusterroleassociation-editor/README.md b/charts/rdsawskubedbcom-clusterroleassociation-editor/README.md index a527a7e108..43435f81b3 100644 --- a/charts/rdsawskubedbcom-clusterroleassociation-editor/README.md +++ b/charts/rdsawskubedbcom-clusterroleassociation-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-clusterroleassociation-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-clusterroleassociation-editor appscode/rdsawskubedbcom-clusterroleassociation-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-clusterroleassociation-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-clusterroleassociation-editor appscode/rdsawskubedbcom-clusterroleassociation-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterRoleAssociation Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `rdsawskubedbcom-clusterroleassociation-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterroleassociation-editor appscode/rdsawskubedbcom-clusterroleassociation-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-clusterroleassociation-editor appscode/rdsawskubedbcom-clusterroleassociation-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterRoleAssociation Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-cl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterroleassociation-editor appscode/rdsawskubedbcom-clusterroleassociation-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-clusterroleassociation-editor appscode/rdsawskubedbcom-clusterroleassociation-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clusterroleassociation-editor appscode/rdsawskubedbcom-clusterroleassociation-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-clusterroleassociation-editor appscode/rdsawskubedbcom-clusterroleassociation-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-clustersnapshot-editor/Chart.yaml b/charts/rdsawskubedbcom-clustersnapshot-editor/Chart.yaml index f4d701dcad..8789e0b4f7 100644 --- a/charts/rdsawskubedbcom-clustersnapshot-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-clustersnapshot-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"clustersnapshots"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterSnapshot Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-clustersnapshot-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-clustersnapshot-editor/README.md b/charts/rdsawskubedbcom-clustersnapshot-editor/README.md index 0e72ab8434..3a24eaf60e 100644 --- a/charts/rdsawskubedbcom-clustersnapshot-editor/README.md +++ b/charts/rdsawskubedbcom-clustersnapshot-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-clustersnapshot-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-clustersnapshot-editor appscode/rdsawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-clustersnapshot-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-clustersnapshot-editor appscode/rdsawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterSnapshot Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `rdsawskubedbcom-clustersnapshot-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-clustersnapshot-editor appscode/rdsawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-clustersnapshot-editor appscode/rdsawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterSnapshot Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-cl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clustersnapshot-editor appscode/rdsawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-clustersnapshot-editor appscode/rdsawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-clustersnapshot-editor appscode/rdsawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-clustersnapshot-editor appscode/rdsawskubedbcom-clustersnapshot-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor/Chart.yaml b/charts/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor/Chart.yaml index 0aaa575a77..75c09503fa 100644 --- a/charts/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"dbinstanceautomatedbackupsreplications"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: DBInstanceAutomatedBackupsReplication Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor/README.md b/charts/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor/README.md index 76d6dc7eb4..5bed62fe09 100644 --- a/charts/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor/README.md +++ b/charts/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DBInstanceAutomatedBackupsReplication Editor on a [Kubernet To install/upgrade the chart with the release name `rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a DBInstanceAutomatedBackupsReplication Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-db Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor appscode/rdsawskubedbcom-dbinstanceautomatedbackupsreplication-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-dbsnapshotcopy-editor/Chart.yaml b/charts/rdsawskubedbcom-dbsnapshotcopy-editor/Chart.yaml index c0e485d863..d6c3d9fd6e 100644 --- a/charts/rdsawskubedbcom-dbsnapshotcopy-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-dbsnapshotcopy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"dbsnapshotcopies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: DBSnapshotCopy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-dbsnapshotcopy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-dbsnapshotcopy-editor/README.md b/charts/rdsawskubedbcom-dbsnapshotcopy-editor/README.md index ba159bf9ab..4ecac3a59d 100644 --- a/charts/rdsawskubedbcom-dbsnapshotcopy-editor/README.md +++ b/charts/rdsawskubedbcom-dbsnapshotcopy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-dbsnapshotcopy-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-dbsnapshotcopy-editor appscode/rdsawskubedbcom-dbsnapshotcopy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-dbsnapshotcopy-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-dbsnapshotcopy-editor appscode/rdsawskubedbcom-dbsnapshotcopy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DBSnapshotCopy Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `rdsawskubedbcom-dbsnapshotcopy-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-dbsnapshotcopy-editor appscode/rdsawskubedbcom-dbsnapshotcopy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-dbsnapshotcopy-editor appscode/rdsawskubedbcom-dbsnapshotcopy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a DBSnapshotCopy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-db Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-dbsnapshotcopy-editor appscode/rdsawskubedbcom-dbsnapshotcopy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-dbsnapshotcopy-editor appscode/rdsawskubedbcom-dbsnapshotcopy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-dbsnapshotcopy-editor appscode/rdsawskubedbcom-dbsnapshotcopy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-dbsnapshotcopy-editor appscode/rdsawskubedbcom-dbsnapshotcopy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-eventsubscription-editor/Chart.yaml b/charts/rdsawskubedbcom-eventsubscription-editor/Chart.yaml index 534eead3f3..f347ca2553 100644 --- a/charts/rdsawskubedbcom-eventsubscription-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-eventsubscription-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"eventsubscriptions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: EventSubscription Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-eventsubscription-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-eventsubscription-editor/README.md b/charts/rdsawskubedbcom-eventsubscription-editor/README.md index c14f095a61..44fa82c3bd 100644 --- a/charts/rdsawskubedbcom-eventsubscription-editor/README.md +++ b/charts/rdsawskubedbcom-eventsubscription-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-eventsubscription-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-eventsubscription-editor appscode/rdsawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-eventsubscription-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-eventsubscription-editor appscode/rdsawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a EventSubscription Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `rdsawskubedbcom-eventsubscription-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-eventsubscription-editor appscode/rdsawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-eventsubscription-editor appscode/rdsawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a EventSubscription Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-ev Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-eventsubscription-editor appscode/rdsawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-eventsubscription-editor appscode/rdsawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-eventsubscription-editor appscode/rdsawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-eventsubscription-editor appscode/rdsawskubedbcom-eventsubscription-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-globalcluster-editor/Chart.yaml b/charts/rdsawskubedbcom-globalcluster-editor/Chart.yaml index 32f034402c..563232aad1 100644 --- a/charts/rdsawskubedbcom-globalcluster-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-globalcluster-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"globalclusters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GlobalCluster Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-globalcluster-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-globalcluster-editor/README.md b/charts/rdsawskubedbcom-globalcluster-editor/README.md index 8e4c0b4b57..f5fb14a1e0 100644 --- a/charts/rdsawskubedbcom-globalcluster-editor/README.md +++ b/charts/rdsawskubedbcom-globalcluster-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-globalcluster-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-globalcluster-editor appscode/rdsawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-globalcluster-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-globalcluster-editor appscode/rdsawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GlobalCluster Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `rdsawskubedbcom-globalcluster-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-globalcluster-editor appscode/rdsawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-globalcluster-editor appscode/rdsawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GlobalCluster Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-gl Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-globalcluster-editor appscode/rdsawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-globalcluster-editor appscode/rdsawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-globalcluster-editor appscode/rdsawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-globalcluster-editor appscode/rdsawskubedbcom-globalcluster-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-instance-editor/Chart.yaml b/charts/rdsawskubedbcom-instance-editor/Chart.yaml index 9896a8b26e..ff18d442c6 100644 --- a/charts/rdsawskubedbcom-instance-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-instance-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"instances"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Instance Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-instance-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-instance-editor/README.md b/charts/rdsawskubedbcom-instance-editor/README.md index df8cb4dc08..f3e84de47d 100644 --- a/charts/rdsawskubedbcom-instance-editor/README.md +++ b/charts/rdsawskubedbcom-instance-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-instance-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-instance-editor appscode/rdsawskubedbcom-instance-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-instance-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-instance-editor appscode/rdsawskubedbcom-instance-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Instance Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `rdsawskubedbcom-instance-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-instance-editor appscode/rdsawskubedbcom-instance-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-instance-editor appscode/rdsawskubedbcom-instance-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Instance Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-in Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-instance-editor appscode/rdsawskubedbcom-instance-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-instance-editor appscode/rdsawskubedbcom-instance-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-instance-editor appscode/rdsawskubedbcom-instance-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-instance-editor appscode/rdsawskubedbcom-instance-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-instanceroleassociation-editor/Chart.yaml b/charts/rdsawskubedbcom-instanceroleassociation-editor/Chart.yaml index 4cdd0596b4..247af8990e 100644 --- a/charts/rdsawskubedbcom-instanceroleassociation-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-instanceroleassociation-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"instanceroleassociations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: InstanceRoleAssociation Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-instanceroleassociation-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-instanceroleassociation-editor/README.md b/charts/rdsawskubedbcom-instanceroleassociation-editor/README.md index 0663df89ba..13d170e06f 100644 --- a/charts/rdsawskubedbcom-instanceroleassociation-editor/README.md +++ b/charts/rdsawskubedbcom-instanceroleassociation-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-instanceroleassociation-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-instanceroleassociation-editor appscode/rdsawskubedbcom-instanceroleassociation-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-instanceroleassociation-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-instanceroleassociation-editor appscode/rdsawskubedbcom-instanceroleassociation-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a InstanceRoleAssociation Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `rdsawskubedbcom-instanceroleassociation-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-instanceroleassociation-editor appscode/rdsawskubedbcom-instanceroleassociation-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-instanceroleassociation-editor appscode/rdsawskubedbcom-instanceroleassociation-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a InstanceRoleAssociation Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-in Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-instanceroleassociation-editor appscode/rdsawskubedbcom-instanceroleassociation-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-instanceroleassociation-editor appscode/rdsawskubedbcom-instanceroleassociation-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-instanceroleassociation-editor appscode/rdsawskubedbcom-instanceroleassociation-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-instanceroleassociation-editor appscode/rdsawskubedbcom-instanceroleassociation-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-optiongroup-editor/Chart.yaml b/charts/rdsawskubedbcom-optiongroup-editor/Chart.yaml index 6d9398dd56..3414ce3de5 100644 --- a/charts/rdsawskubedbcom-optiongroup-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-optiongroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"optiongroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: OptionGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-optiongroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-optiongroup-editor/README.md b/charts/rdsawskubedbcom-optiongroup-editor/README.md index b8350dab13..63bfd2fbe9 100644 --- a/charts/rdsawskubedbcom-optiongroup-editor/README.md +++ b/charts/rdsawskubedbcom-optiongroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-optiongroup-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-optiongroup-editor appscode/rdsawskubedbcom-optiongroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-optiongroup-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-optiongroup-editor appscode/rdsawskubedbcom-optiongroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a OptionGroup Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `rdsawskubedbcom-optiongroup-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-optiongroup-editor appscode/rdsawskubedbcom-optiongroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-optiongroup-editor appscode/rdsawskubedbcom-optiongroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a OptionGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-op Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-optiongroup-editor appscode/rdsawskubedbcom-optiongroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-optiongroup-editor appscode/rdsawskubedbcom-optiongroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-optiongroup-editor appscode/rdsawskubedbcom-optiongroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-optiongroup-editor appscode/rdsawskubedbcom-optiongroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-parametergroup-editor/Chart.yaml b/charts/rdsawskubedbcom-parametergroup-editor/Chart.yaml index 6f0cb62232..5dfe1b6bd1 100644 --- a/charts/rdsawskubedbcom-parametergroup-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-parametergroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"parametergroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ParameterGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-parametergroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-parametergroup-editor/README.md b/charts/rdsawskubedbcom-parametergroup-editor/README.md index 59083f0cbd..70e93449ae 100644 --- a/charts/rdsawskubedbcom-parametergroup-editor/README.md +++ b/charts/rdsawskubedbcom-parametergroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-parametergroup-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-parametergroup-editor appscode/rdsawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-parametergroup-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-parametergroup-editor appscode/rdsawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ParameterGroup Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `rdsawskubedbcom-parametergroup-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-parametergroup-editor appscode/rdsawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-parametergroup-editor appscode/rdsawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ParameterGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-pa Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-parametergroup-editor appscode/rdsawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-parametergroup-editor appscode/rdsawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-parametergroup-editor appscode/rdsawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-parametergroup-editor appscode/rdsawskubedbcom-parametergroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-proxy-editor/Chart.yaml b/charts/rdsawskubedbcom-proxy-editor/Chart.yaml index 58dd40669d..be32ff3ff2 100644 --- a/charts/rdsawskubedbcom-proxy-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-proxy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"proxies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Proxy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-proxy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-proxy-editor/README.md b/charts/rdsawskubedbcom-proxy-editor/README.md index 5934eb0988..22270e6eed 100644 --- a/charts/rdsawskubedbcom-proxy-editor/README.md +++ b/charts/rdsawskubedbcom-proxy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-proxy-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-proxy-editor appscode/rdsawskubedbcom-proxy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-proxy-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-proxy-editor appscode/rdsawskubedbcom-proxy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Proxy Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `rdsawskubedbcom-proxy-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-proxy-editor appscode/rdsawskubedbcom-proxy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-proxy-editor appscode/rdsawskubedbcom-proxy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Proxy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-pr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-proxy-editor appscode/rdsawskubedbcom-proxy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-proxy-editor appscode/rdsawskubedbcom-proxy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-proxy-editor appscode/rdsawskubedbcom-proxy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-proxy-editor appscode/rdsawskubedbcom-proxy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-proxydefaulttargetgroup-editor/Chart.yaml b/charts/rdsawskubedbcom-proxydefaulttargetgroup-editor/Chart.yaml index 722a94aa6f..db352d7046 100644 --- a/charts/rdsawskubedbcom-proxydefaulttargetgroup-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-proxydefaulttargetgroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"proxydefaulttargetgroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProxyDefaultTargetGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-proxydefaulttargetgroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-proxydefaulttargetgroup-editor/README.md b/charts/rdsawskubedbcom-proxydefaulttargetgroup-editor/README.md index 60dfa50773..01fb79ec3b 100644 --- a/charts/rdsawskubedbcom-proxydefaulttargetgroup-editor/README.md +++ b/charts/rdsawskubedbcom-proxydefaulttargetgroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-proxydefaulttargetgroup-editor appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-proxydefaulttargetgroup-editor appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxyDefaultTargetGroup Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `rdsawskubedbcom-proxydefaulttargetgroup-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-proxydefaulttargetgroup-editor appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-proxydefaulttargetgroup-editor appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProxyDefaultTargetGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-pr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-proxydefaulttargetgroup-editor appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-proxydefaulttargetgroup-editor appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-proxydefaulttargetgroup-editor appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-proxydefaulttargetgroup-editor appscode/rdsawskubedbcom-proxydefaulttargetgroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-proxyendpoint-editor/Chart.yaml b/charts/rdsawskubedbcom-proxyendpoint-editor/Chart.yaml index 4f92730905..84979e28e8 100644 --- a/charts/rdsawskubedbcom-proxyendpoint-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-proxyendpoint-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"proxyendpoints"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProxyEndpoint Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-proxyendpoint-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-proxyendpoint-editor/README.md b/charts/rdsawskubedbcom-proxyendpoint-editor/README.md index 5179729ccc..7efaaffcfd 100644 --- a/charts/rdsawskubedbcom-proxyendpoint-editor/README.md +++ b/charts/rdsawskubedbcom-proxyendpoint-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-proxyendpoint-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-proxyendpoint-editor appscode/rdsawskubedbcom-proxyendpoint-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-proxyendpoint-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-proxyendpoint-editor appscode/rdsawskubedbcom-proxyendpoint-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxyEndpoint Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `rdsawskubedbcom-proxyendpoint-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-proxyendpoint-editor appscode/rdsawskubedbcom-proxyendpoint-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-proxyendpoint-editor appscode/rdsawskubedbcom-proxyendpoint-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProxyEndpoint Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-pr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-proxyendpoint-editor appscode/rdsawskubedbcom-proxyendpoint-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-proxyendpoint-editor appscode/rdsawskubedbcom-proxyendpoint-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-proxyendpoint-editor appscode/rdsawskubedbcom-proxyendpoint-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-proxyendpoint-editor appscode/rdsawskubedbcom-proxyendpoint-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-proxytarget-editor/Chart.yaml b/charts/rdsawskubedbcom-proxytarget-editor/Chart.yaml index de480ae068..943f4b0281 100644 --- a/charts/rdsawskubedbcom-proxytarget-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-proxytarget-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"proxytargets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProxyTarget Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-proxytarget-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-proxytarget-editor/README.md b/charts/rdsawskubedbcom-proxytarget-editor/README.md index 0b0acec347..b338de3e2b 100644 --- a/charts/rdsawskubedbcom-proxytarget-editor/README.md +++ b/charts/rdsawskubedbcom-proxytarget-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-proxytarget-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-proxytarget-editor appscode/rdsawskubedbcom-proxytarget-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-proxytarget-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-proxytarget-editor appscode/rdsawskubedbcom-proxytarget-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxyTarget Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `rdsawskubedbcom-proxytarget-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-proxytarget-editor appscode/rdsawskubedbcom-proxytarget-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-proxytarget-editor appscode/rdsawskubedbcom-proxytarget-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProxyTarget Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-pr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-proxytarget-editor appscode/rdsawskubedbcom-proxytarget-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-proxytarget-editor appscode/rdsawskubedbcom-proxytarget-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-proxytarget-editor appscode/rdsawskubedbcom-proxytarget-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-proxytarget-editor appscode/rdsawskubedbcom-proxytarget-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-snapshot-editor/Chart.yaml b/charts/rdsawskubedbcom-snapshot-editor/Chart.yaml index b037f8cac9..a62630a9dc 100644 --- a/charts/rdsawskubedbcom-snapshot-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-snapshot-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"snapshots"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Snapshot Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-snapshot-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-snapshot-editor/README.md b/charts/rdsawskubedbcom-snapshot-editor/README.md index fe80269ab8..d6d19d636d 100644 --- a/charts/rdsawskubedbcom-snapshot-editor/README.md +++ b/charts/rdsawskubedbcom-snapshot-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-snapshot-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-snapshot-editor appscode/rdsawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-snapshot-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-snapshot-editor appscode/rdsawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Snapshot Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `rdsawskubedbcom-snapshot-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-snapshot-editor appscode/rdsawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-snapshot-editor appscode/rdsawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Snapshot Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-sn Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-snapshot-editor appscode/rdsawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-snapshot-editor appscode/rdsawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-snapshot-editor appscode/rdsawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-snapshot-editor appscode/rdsawskubedbcom-snapshot-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/rdsawskubedbcom-subnetgroup-editor/Chart.yaml b/charts/rdsawskubedbcom-subnetgroup-editor/Chart.yaml index 19bec05145..7feab20f94 100644 --- a/charts/rdsawskubedbcom-subnetgroup-editor/Chart.yaml +++ b/charts/rdsawskubedbcom-subnetgroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"rds.aws.kubedb.com","version":"v1alpha1","resource":"subnetgroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SubnetGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: rdsawskubedbcom-subnetgroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/rdsawskubedbcom-subnetgroup-editor/README.md b/charts/rdsawskubedbcom-subnetgroup-editor/README.md index 53970c5e8e..bc650defb1 100644 --- a/charts/rdsawskubedbcom-subnetgroup-editor/README.md +++ b/charts/rdsawskubedbcom-subnetgroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/rdsawskubedbcom-subnetgroup-editor --version=v0.23.0 -$ helm upgrade -i rdsawskubedbcom-subnetgroup-editor appscode/rdsawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/rdsawskubedbcom-subnetgroup-editor --version=v0.24.0 +$ helm upgrade -i rdsawskubedbcom-subnetgroup-editor appscode/rdsawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SubnetGroup Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `rdsawskubedbcom-subnetgroup-editor`: ```bash -$ helm upgrade -i rdsawskubedbcom-subnetgroup-editor appscode/rdsawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i rdsawskubedbcom-subnetgroup-editor appscode/rdsawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SubnetGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `rdsawskubedbcom-su Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-subnetgroup-editor appscode/rdsawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 +$ helm upgrade -i rdsawskubedbcom-subnetgroup-editor appscode/rdsawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=rds.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i rdsawskubedbcom-subnetgroup-editor appscode/rdsawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i rdsawskubedbcom-subnetgroup-editor appscode/rdsawskubedbcom-subnetgroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/redisgcpkubedbcom-instance-editor/Chart.yaml b/charts/redisgcpkubedbcom-instance-editor/Chart.yaml index 138c4d01c9..488cb4fc0b 100644 --- a/charts/redisgcpkubedbcom-instance-editor/Chart.yaml +++ b/charts/redisgcpkubedbcom-instance-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"redis.gcp.kubedb.com","version":"v1alpha1","resource":"instances"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Instance Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: redisgcpkubedbcom-instance-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/redisgcpkubedbcom-instance-editor/README.md b/charts/redisgcpkubedbcom-instance-editor/README.md index 189db580c2..827f01ea0b 100644 --- a/charts/redisgcpkubedbcom-instance-editor/README.md +++ b/charts/redisgcpkubedbcom-instance-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/redisgcpkubedbcom-instance-editor --version=v0.23.0 -$ helm upgrade -i redisgcpkubedbcom-instance-editor appscode/redisgcpkubedbcom-instance-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/redisgcpkubedbcom-instance-editor --version=v0.24.0 +$ helm upgrade -i redisgcpkubedbcom-instance-editor appscode/redisgcpkubedbcom-instance-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Instance Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `redisgcpkubedbcom-instance-editor`: ```bash -$ helm upgrade -i redisgcpkubedbcom-instance-editor appscode/redisgcpkubedbcom-instance-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i redisgcpkubedbcom-instance-editor appscode/redisgcpkubedbcom-instance-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Instance Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `redisgcpkubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i redisgcpkubedbcom-instance-editor appscode/redisgcpkubedbcom-instance-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=redis.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i redisgcpkubedbcom-instance-editor appscode/redisgcpkubedbcom-instance-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=redis.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i redisgcpkubedbcom-instance-editor appscode/redisgcpkubedbcom-instance-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i redisgcpkubedbcom-instance-editor appscode/redisgcpkubedbcom-instance-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/releasesxhelmdev-bundle-editor/Chart.yaml b/charts/releasesxhelmdev-bundle-editor/Chart.yaml index ca5523a63e..90112e8da4 100644 --- a/charts/releasesxhelmdev-bundle-editor/Chart.yaml +++ b/charts/releasesxhelmdev-bundle-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"releases.x-helm.dev","version":"v1alpha1","resource":"bundles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Bundle Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: releasesxhelmdev-bundle-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/releasesxhelmdev-bundle-editor/README.md b/charts/releasesxhelmdev-bundle-editor/README.md index c52e23d7a9..8cbc4ddf6e 100644 --- a/charts/releasesxhelmdev-bundle-editor/README.md +++ b/charts/releasesxhelmdev-bundle-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/releasesxhelmdev-bundle-editor --version=v0.23.0 -$ helm upgrade -i releasesxhelmdev-bundle-editor appscode/releasesxhelmdev-bundle-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/releasesxhelmdev-bundle-editor --version=v0.24.0 +$ helm upgrade -i releasesxhelmdev-bundle-editor appscode/releasesxhelmdev-bundle-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Bundle Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `releasesxhelmdev-bundle-editor`: ```bash -$ helm upgrade -i releasesxhelmdev-bundle-editor appscode/releasesxhelmdev-bundle-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i releasesxhelmdev-bundle-editor appscode/releasesxhelmdev-bundle-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Bundle Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `releasesxhelmdev-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i releasesxhelmdev-bundle-editor appscode/releasesxhelmdev-bundle-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=releases.x-helm.dev/v1alpha1 +$ helm upgrade -i releasesxhelmdev-bundle-editor appscode/releasesxhelmdev-bundle-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=releases.x-helm.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i releasesxhelmdev-bundle-editor appscode/releasesxhelmdev-bundle-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i releasesxhelmdev-bundle-editor appscode/releasesxhelmdev-bundle-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/releasesxhelmdev-order-editor/Chart.yaml b/charts/releasesxhelmdev-order-editor/Chart.yaml index 704eadb4ef..68551a7a6f 100644 --- a/charts/releasesxhelmdev-order-editor/Chart.yaml +++ b/charts/releasesxhelmdev-order-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"releases.x-helm.dev","version":"v1alpha1","resource":"orders"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Order Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: releasesxhelmdev-order-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/releasesxhelmdev-order-editor/README.md b/charts/releasesxhelmdev-order-editor/README.md index bdf125e1a4..02ac8d9c95 100644 --- a/charts/releasesxhelmdev-order-editor/README.md +++ b/charts/releasesxhelmdev-order-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/releasesxhelmdev-order-editor --version=v0.23.0 -$ helm upgrade -i releasesxhelmdev-order-editor appscode/releasesxhelmdev-order-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/releasesxhelmdev-order-editor --version=v0.24.0 +$ helm upgrade -i releasesxhelmdev-order-editor appscode/releasesxhelmdev-order-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Order Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `releasesxhelmdev-order-editor`: ```bash -$ helm upgrade -i releasesxhelmdev-order-editor appscode/releasesxhelmdev-order-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i releasesxhelmdev-order-editor appscode/releasesxhelmdev-order-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Order Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `releasesxhelmdev-o Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i releasesxhelmdev-order-editor appscode/releasesxhelmdev-order-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=releases.x-helm.dev/v1alpha1 +$ helm upgrade -i releasesxhelmdev-order-editor appscode/releasesxhelmdev-order-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=releases.x-helm.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i releasesxhelmdev-order-editor appscode/releasesxhelmdev-order-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i releasesxhelmdev-order-editor appscode/releasesxhelmdev-order-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/repositoriesstashappscodecom-snapshot-editor/Chart.yaml b/charts/repositoriesstashappscodecom-snapshot-editor/Chart.yaml index b7fb774a46..d2c06afdcb 100644 --- a/charts/repositoriesstashappscodecom-snapshot-editor/Chart.yaml +++ b/charts/repositoriesstashappscodecom-snapshot-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"repositories.stash.appscode.com","version":"v1alpha1","resource":"snapshots"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Snapshot Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: repositoriesstashappscodecom-snapshot-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/repositoriesstashappscodecom-snapshot-editor/README.md b/charts/repositoriesstashappscodecom-snapshot-editor/README.md index 52ca7a308c..d6aebe9dcf 100644 --- a/charts/repositoriesstashappscodecom-snapshot-editor/README.md +++ b/charts/repositoriesstashappscodecom-snapshot-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/repositoriesstashappscodecom-snapshot-editor --version=v0.23.0 -$ helm upgrade -i repositoriesstashappscodecom-snapshot-editor appscode/repositoriesstashappscodecom-snapshot-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/repositoriesstashappscodecom-snapshot-editor --version=v0.24.0 +$ helm upgrade -i repositoriesstashappscodecom-snapshot-editor appscode/repositoriesstashappscodecom-snapshot-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Snapshot Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `repositoriesstashappscodecom-snapshot-editor`: ```bash -$ helm upgrade -i repositoriesstashappscodecom-snapshot-editor appscode/repositoriesstashappscodecom-snapshot-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i repositoriesstashappscodecom-snapshot-editor appscode/repositoriesstashappscodecom-snapshot-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Snapshot Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `repositoriesstasha Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i repositoriesstashappscodecom-snapshot-editor appscode/repositoriesstashappscodecom-snapshot-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=repositories.stash.appscode.com/v1alpha1 +$ helm upgrade -i repositoriesstashappscodecom-snapshot-editor appscode/repositoriesstashappscodecom-snapshot-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=repositories.stash.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i repositoriesstashappscodecom-snapshot-editor appscode/repositoriesstashappscodecom-snapshot-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i repositoriesstashappscodecom-snapshot-editor appscode/repositoriesstashappscodecom-snapshot-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/runtimeclusterxk8sio-extensionconfig-editor/Chart.yaml b/charts/runtimeclusterxk8sio-extensionconfig-editor/Chart.yaml index 29f186d42f..8440671cc5 100644 --- a/charts/runtimeclusterxk8sio-extensionconfig-editor/Chart.yaml +++ b/charts/runtimeclusterxk8sio-extensionconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"runtime.cluster.x-k8s.io","version":"v1alpha1","resource":"extensionconfigs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ExtensionConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: runtimeclusterxk8sio-extensionconfig-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/runtimeclusterxk8sio-extensionconfig-editor/README.md b/charts/runtimeclusterxk8sio-extensionconfig-editor/README.md index bffedf6314..b0b896fac5 100644 --- a/charts/runtimeclusterxk8sio-extensionconfig-editor/README.md +++ b/charts/runtimeclusterxk8sio-extensionconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/runtimeclusterxk8sio-extensionconfig-editor --version=v0.23.0 -$ helm upgrade -i runtimeclusterxk8sio-extensionconfig-editor appscode/runtimeclusterxk8sio-extensionconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/runtimeclusterxk8sio-extensionconfig-editor --version=v0.24.0 +$ helm upgrade -i runtimeclusterxk8sio-extensionconfig-editor appscode/runtimeclusterxk8sio-extensionconfig-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ExtensionConfig Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `runtimeclusterxk8sio-extensionconfig-editor`: ```bash -$ helm upgrade -i runtimeclusterxk8sio-extensionconfig-editor appscode/runtimeclusterxk8sio-extensionconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i runtimeclusterxk8sio-extensionconfig-editor appscode/runtimeclusterxk8sio-extensionconfig-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ExtensionConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `runtimeclusterxk8s Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i runtimeclusterxk8sio-extensionconfig-editor appscode/runtimeclusterxk8sio-extensionconfig-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=runtime.cluster.x-k8s.io/v1alpha1 +$ helm upgrade -i runtimeclusterxk8sio-extensionconfig-editor appscode/runtimeclusterxk8sio-extensionconfig-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=runtime.cluster.x-k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i runtimeclusterxk8sio-extensionconfig-editor appscode/runtimeclusterxk8sio-extensionconfig-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i runtimeclusterxk8sio-extensionconfig-editor appscode/runtimeclusterxk8sio-extensionconfig-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/schedulingk8sio-priorityclass-editor/Chart.yaml b/charts/schedulingk8sio-priorityclass-editor/Chart.yaml index 95df0c6d2f..7678633591 100644 --- a/charts/schedulingk8sio-priorityclass-editor/Chart.yaml +++ b/charts/schedulingk8sio-priorityclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"scheduling.k8s.io","version":"v1","resource":"priorityclasses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PriorityClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: schedulingk8sio-priorityclass-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/schedulingk8sio-priorityclass-editor/README.md b/charts/schedulingk8sio-priorityclass-editor/README.md index 84ddfacbec..7b722d2652 100644 --- a/charts/schedulingk8sio-priorityclass-editor/README.md +++ b/charts/schedulingk8sio-priorityclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/schedulingk8sio-priorityclass-editor --version=v0.23.0 -$ helm upgrade -i schedulingk8sio-priorityclass-editor appscode/schedulingk8sio-priorityclass-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/schedulingk8sio-priorityclass-editor --version=v0.24.0 +$ helm upgrade -i schedulingk8sio-priorityclass-editor appscode/schedulingk8sio-priorityclass-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PriorityClass Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `schedulingk8sio-priorityclass-editor`: ```bash -$ helm upgrade -i schedulingk8sio-priorityclass-editor appscode/schedulingk8sio-priorityclass-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i schedulingk8sio-priorityclass-editor appscode/schedulingk8sio-priorityclass-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PriorityClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `schedulingk8sio-pr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i schedulingk8sio-priorityclass-editor appscode/schedulingk8sio-priorityclass-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=scheduling.k8s.io/v1 +$ helm upgrade -i schedulingk8sio-priorityclass-editor appscode/schedulingk8sio-priorityclass-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=scheduling.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i schedulingk8sio-priorityclass-editor appscode/schedulingk8sio-priorityclass-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i schedulingk8sio-priorityclass-editor appscode/schedulingk8sio-priorityclass-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/schemakubedbcom-mariadbdatabase-editor/Chart.yaml b/charts/schemakubedbcom-mariadbdatabase-editor/Chart.yaml index e150e9779f..f868e4e777 100644 --- a/charts/schemakubedbcom-mariadbdatabase-editor/Chart.yaml +++ b/charts/schemakubedbcom-mariadbdatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"schema.kubedb.com","version":"v1alpha1","resource":"mariadbdatabases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MariaDBDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: schemakubedbcom-mariadbdatabase-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/schemakubedbcom-mariadbdatabase-editor/README.md b/charts/schemakubedbcom-mariadbdatabase-editor/README.md index 01947bebcf..40590644fa 100644 --- a/charts/schemakubedbcom-mariadbdatabase-editor/README.md +++ b/charts/schemakubedbcom-mariadbdatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/schemakubedbcom-mariadbdatabase-editor --version=v0.23.0 -$ helm upgrade -i schemakubedbcom-mariadbdatabase-editor appscode/schemakubedbcom-mariadbdatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/schemakubedbcom-mariadbdatabase-editor --version=v0.24.0 +$ helm upgrade -i schemakubedbcom-mariadbdatabase-editor appscode/schemakubedbcom-mariadbdatabase-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBDatabase Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `schemakubedbcom-mariadbdatabase-editor`: ```bash -$ helm upgrade -i schemakubedbcom-mariadbdatabase-editor appscode/schemakubedbcom-mariadbdatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i schemakubedbcom-mariadbdatabase-editor appscode/schemakubedbcom-mariadbdatabase-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MariaDBDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `schemakubedbcom-ma Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i schemakubedbcom-mariadbdatabase-editor appscode/schemakubedbcom-mariadbdatabase-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=schema.kubedb.com/v1alpha1 +$ helm upgrade -i schemakubedbcom-mariadbdatabase-editor appscode/schemakubedbcom-mariadbdatabase-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=schema.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i schemakubedbcom-mariadbdatabase-editor appscode/schemakubedbcom-mariadbdatabase-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i schemakubedbcom-mariadbdatabase-editor appscode/schemakubedbcom-mariadbdatabase-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/schemakubedbcom-mongodbdatabase-editor/Chart.yaml b/charts/schemakubedbcom-mongodbdatabase-editor/Chart.yaml index 0e828d221e..373af2e94e 100644 --- a/charts/schemakubedbcom-mongodbdatabase-editor/Chart.yaml +++ b/charts/schemakubedbcom-mongodbdatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"schema.kubedb.com","version":"v1alpha1","resource":"mongodbdatabases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MongoDBDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: schemakubedbcom-mongodbdatabase-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/schemakubedbcom-mongodbdatabase-editor/README.md b/charts/schemakubedbcom-mongodbdatabase-editor/README.md index f341e0b334..7e79876bad 100644 --- a/charts/schemakubedbcom-mongodbdatabase-editor/README.md +++ b/charts/schemakubedbcom-mongodbdatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/schemakubedbcom-mongodbdatabase-editor --version=v0.23.0 -$ helm upgrade -i schemakubedbcom-mongodbdatabase-editor appscode/schemakubedbcom-mongodbdatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/schemakubedbcom-mongodbdatabase-editor --version=v0.24.0 +$ helm upgrade -i schemakubedbcom-mongodbdatabase-editor appscode/schemakubedbcom-mongodbdatabase-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBDatabase Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `schemakubedbcom-mongodbdatabase-editor`: ```bash -$ helm upgrade -i schemakubedbcom-mongodbdatabase-editor appscode/schemakubedbcom-mongodbdatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i schemakubedbcom-mongodbdatabase-editor appscode/schemakubedbcom-mongodbdatabase-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MongoDBDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `schemakubedbcom-mo Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i schemakubedbcom-mongodbdatabase-editor appscode/schemakubedbcom-mongodbdatabase-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=schema.kubedb.com/v1alpha1 +$ helm upgrade -i schemakubedbcom-mongodbdatabase-editor appscode/schemakubedbcom-mongodbdatabase-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=schema.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i schemakubedbcom-mongodbdatabase-editor appscode/schemakubedbcom-mongodbdatabase-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i schemakubedbcom-mongodbdatabase-editor appscode/schemakubedbcom-mongodbdatabase-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/schemakubedbcom-mysqldatabase-editor/Chart.yaml b/charts/schemakubedbcom-mysqldatabase-editor/Chart.yaml index eb5e5a99ad..1422faadec 100644 --- a/charts/schemakubedbcom-mysqldatabase-editor/Chart.yaml +++ b/charts/schemakubedbcom-mysqldatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"schema.kubedb.com","version":"v1alpha1","resource":"mysqldatabases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MySQLDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: schemakubedbcom-mysqldatabase-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/schemakubedbcom-mysqldatabase-editor/README.md b/charts/schemakubedbcom-mysqldatabase-editor/README.md index 19ac76a20c..8ac032ba5b 100644 --- a/charts/schemakubedbcom-mysqldatabase-editor/README.md +++ b/charts/schemakubedbcom-mysqldatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/schemakubedbcom-mysqldatabase-editor --version=v0.23.0 -$ helm upgrade -i schemakubedbcom-mysqldatabase-editor appscode/schemakubedbcom-mysqldatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/schemakubedbcom-mysqldatabase-editor --version=v0.24.0 +$ helm upgrade -i schemakubedbcom-mysqldatabase-editor appscode/schemakubedbcom-mysqldatabase-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLDatabase Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `schemakubedbcom-mysqldatabase-editor`: ```bash -$ helm upgrade -i schemakubedbcom-mysqldatabase-editor appscode/schemakubedbcom-mysqldatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i schemakubedbcom-mysqldatabase-editor appscode/schemakubedbcom-mysqldatabase-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MySQLDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `schemakubedbcom-my Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i schemakubedbcom-mysqldatabase-editor appscode/schemakubedbcom-mysqldatabase-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=schema.kubedb.com/v1alpha1 +$ helm upgrade -i schemakubedbcom-mysqldatabase-editor appscode/schemakubedbcom-mysqldatabase-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=schema.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i schemakubedbcom-mysqldatabase-editor appscode/schemakubedbcom-mysqldatabase-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i schemakubedbcom-mysqldatabase-editor appscode/schemakubedbcom-mysqldatabase-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/schemakubedbcom-postgresdatabase-editor/Chart.yaml b/charts/schemakubedbcom-postgresdatabase-editor/Chart.yaml index a7097085fc..8c7c7bcf69 100644 --- a/charts/schemakubedbcom-postgresdatabase-editor/Chart.yaml +++ b/charts/schemakubedbcom-postgresdatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"schema.kubedb.com","version":"v1alpha1","resource":"postgresdatabases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PostgresDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: schemakubedbcom-postgresdatabase-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/schemakubedbcom-postgresdatabase-editor/README.md b/charts/schemakubedbcom-postgresdatabase-editor/README.md index 06a81a3171..01f1d93f55 100644 --- a/charts/schemakubedbcom-postgresdatabase-editor/README.md +++ b/charts/schemakubedbcom-postgresdatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/schemakubedbcom-postgresdatabase-editor --version=v0.23.0 -$ helm upgrade -i schemakubedbcom-postgresdatabase-editor appscode/schemakubedbcom-postgresdatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/schemakubedbcom-postgresdatabase-editor --version=v0.24.0 +$ helm upgrade -i schemakubedbcom-postgresdatabase-editor appscode/schemakubedbcom-postgresdatabase-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresDatabase Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `schemakubedbcom-postgresdatabase-editor`: ```bash -$ helm upgrade -i schemakubedbcom-postgresdatabase-editor appscode/schemakubedbcom-postgresdatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i schemakubedbcom-postgresdatabase-editor appscode/schemakubedbcom-postgresdatabase-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PostgresDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `schemakubedbcom-po Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i schemakubedbcom-postgresdatabase-editor appscode/schemakubedbcom-postgresdatabase-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=schema.kubedb.com/v1alpha1 +$ helm upgrade -i schemakubedbcom-postgresdatabase-editor appscode/schemakubedbcom-postgresdatabase-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=schema.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i schemakubedbcom-postgresdatabase-editor appscode/schemakubedbcom-postgresdatabase-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i schemakubedbcom-postgresdatabase-editor appscode/schemakubedbcom-postgresdatabase-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/secretscrossplaneio-storeconfig-editor/Chart.yaml b/charts/secretscrossplaneio-storeconfig-editor/Chart.yaml index 5dbf3ff33a..21c741cf1d 100644 --- a/charts/secretscrossplaneio-storeconfig-editor/Chart.yaml +++ b/charts/secretscrossplaneio-storeconfig-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"secrets.crossplane.io","version":"v1alpha1","resource":"storeconfigs"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: StoreConfig Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: secretscrossplaneio-storeconfig-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/secretscrossplaneio-storeconfig-editor/README.md b/charts/secretscrossplaneio-storeconfig-editor/README.md index e5cc32f0e3..53977c17b0 100644 --- a/charts/secretscrossplaneio-storeconfig-editor/README.md +++ b/charts/secretscrossplaneio-storeconfig-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/secretscrossplaneio-storeconfig-editor --version=v0.23.0 -$ helm upgrade -i secretscrossplaneio-storeconfig-editor appscode/secretscrossplaneio-storeconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/secretscrossplaneio-storeconfig-editor --version=v0.24.0 +$ helm upgrade -i secretscrossplaneio-storeconfig-editor appscode/secretscrossplaneio-storeconfig-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a StoreConfig Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `secretscrossplaneio-storeconfig-editor`: ```bash -$ helm upgrade -i secretscrossplaneio-storeconfig-editor appscode/secretscrossplaneio-storeconfig-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i secretscrossplaneio-storeconfig-editor appscode/secretscrossplaneio-storeconfig-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a StoreConfig Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `secretscrossplanei Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i secretscrossplaneio-storeconfig-editor appscode/secretscrossplaneio-storeconfig-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=secrets.crossplane.io/v1alpha1 +$ helm upgrade -i secretscrossplaneio-storeconfig-editor appscode/secretscrossplaneio-storeconfig-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=secrets.crossplane.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i secretscrossplaneio-storeconfig-editor appscode/secretscrossplaneio-storeconfig-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i secretscrossplaneio-storeconfig-editor appscode/secretscrossplaneio-storeconfig-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/secretsmanagerawskubedbcom-secret-editor/Chart.yaml b/charts/secretsmanagerawskubedbcom-secret-editor/Chart.yaml index 95d6cdf8f2..fa6357cd97 100644 --- a/charts/secretsmanagerawskubedbcom-secret-editor/Chart.yaml +++ b/charts/secretsmanagerawskubedbcom-secret-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"secretsmanager.aws.kubedb.com","version":"v1alpha1","resource":"secrets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Secret Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: secretsmanagerawskubedbcom-secret-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/secretsmanagerawskubedbcom-secret-editor/README.md b/charts/secretsmanagerawskubedbcom-secret-editor/README.md index 6cbcff7ad7..fa40a0e168 100644 --- a/charts/secretsmanagerawskubedbcom-secret-editor/README.md +++ b/charts/secretsmanagerawskubedbcom-secret-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/secretsmanagerawskubedbcom-secret-editor --version=v0.23.0 -$ helm upgrade -i secretsmanagerawskubedbcom-secret-editor appscode/secretsmanagerawskubedbcom-secret-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/secretsmanagerawskubedbcom-secret-editor --version=v0.24.0 +$ helm upgrade -i secretsmanagerawskubedbcom-secret-editor appscode/secretsmanagerawskubedbcom-secret-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Secret Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `secretsmanagerawskubedbcom-secret-editor`: ```bash -$ helm upgrade -i secretsmanagerawskubedbcom-secret-editor appscode/secretsmanagerawskubedbcom-secret-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i secretsmanagerawskubedbcom-secret-editor appscode/secretsmanagerawskubedbcom-secret-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Secret Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `secretsmanagerawsk Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i secretsmanagerawskubedbcom-secret-editor appscode/secretsmanagerawskubedbcom-secret-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=secretsmanager.aws.kubedb.com/v1alpha1 +$ helm upgrade -i secretsmanagerawskubedbcom-secret-editor appscode/secretsmanagerawskubedbcom-secret-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=secretsmanager.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i secretsmanagerawskubedbcom-secret-editor appscode/secretsmanagerawskubedbcom-secret-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i secretsmanagerawskubedbcom-secret-editor appscode/secretsmanagerawskubedbcom-secret-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/secretsstorecsixk8sio-secretproviderclass-editor/Chart.yaml b/charts/secretsstorecsixk8sio-secretproviderclass-editor/Chart.yaml index 60a329f78f..cfee8b6910 100644 --- a/charts/secretsstorecsixk8sio-secretproviderclass-editor/Chart.yaml +++ b/charts/secretsstorecsixk8sio-secretproviderclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"secrets-store.csi.x-k8s.io","version":"v1","resource":"secretproviderclasses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SecretProviderClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: secretsstorecsixk8sio-secretproviderclass-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/secretsstorecsixk8sio-secretproviderclass-editor/README.md b/charts/secretsstorecsixk8sio-secretproviderclass-editor/README.md index b0dac098b7..7ab466c093 100644 --- a/charts/secretsstorecsixk8sio-secretproviderclass-editor/README.md +++ b/charts/secretsstorecsixk8sio-secretproviderclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/secretsstorecsixk8sio-secretproviderclass-editor --version=v0.23.0 -$ helm upgrade -i secretsstorecsixk8sio-secretproviderclass-editor appscode/secretsstorecsixk8sio-secretproviderclass-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/secretsstorecsixk8sio-secretproviderclass-editor --version=v0.24.0 +$ helm upgrade -i secretsstorecsixk8sio-secretproviderclass-editor appscode/secretsstorecsixk8sio-secretproviderclass-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecretProviderClass Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `secretsstorecsixk8sio-secretproviderclass-editor`: ```bash -$ helm upgrade -i secretsstorecsixk8sio-secretproviderclass-editor appscode/secretsstorecsixk8sio-secretproviderclass-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i secretsstorecsixk8sio-secretproviderclass-editor appscode/secretsstorecsixk8sio-secretproviderclass-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SecretProviderClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `secretsstorecsixk8 Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i secretsstorecsixk8sio-secretproviderclass-editor appscode/secretsstorecsixk8sio-secretproviderclass-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=secrets-store.csi.x-k8s.io/v1 +$ helm upgrade -i secretsstorecsixk8sio-secretproviderclass-editor appscode/secretsstorecsixk8sio-secretproviderclass-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=secrets-store.csi.x-k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i secretsstorecsixk8sio-secretproviderclass-editor appscode/secretsstorecsixk8sio-secretproviderclass-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i secretsstorecsixk8sio-secretproviderclass-editor appscode/secretsstorecsixk8sio-secretproviderclass-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/secretsstorecsixk8sio-secretproviderclasspodstatus-editor/Chart.yaml b/charts/secretsstorecsixk8sio-secretproviderclasspodstatus-editor/Chart.yaml index 2ad0d69154..cb99d39778 100644 --- a/charts/secretsstorecsixk8sio-secretproviderclasspodstatus-editor/Chart.yaml +++ b/charts/secretsstorecsixk8sio-secretproviderclasspodstatus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"secrets-store.csi.x-k8s.io","version":"v1","resource":"secretproviderclasspodstatuses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SecretProviderClassPodStatus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: secretsstorecsixk8sio-secretproviderclasspodstatus-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/secretsstorecsixk8sio-secretproviderclasspodstatus-editor/README.md b/charts/secretsstorecsixk8sio-secretproviderclasspodstatus-editor/README.md index 49b412efb0..983b903b52 100644 --- a/charts/secretsstorecsixk8sio-secretproviderclasspodstatus-editor/README.md +++ b/charts/secretsstorecsixk8sio-secretproviderclasspodstatus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor --version=v0.23.0 -$ helm upgrade -i secretsstorecsixk8sio-secretproviderclasspodstatus-editor appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor --version=v0.24.0 +$ helm upgrade -i secretsstorecsixk8sio-secretproviderclasspodstatus-editor appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SecretProviderClassPodStatus Editor on a [Kubernetes](http: To install/upgrade the chart with the release name `secretsstorecsixk8sio-secretproviderclasspodstatus-editor`: ```bash -$ helm upgrade -i secretsstorecsixk8sio-secretproviderclasspodstatus-editor appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i secretsstorecsixk8sio-secretproviderclasspodstatus-editor appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SecretProviderClassPodStatus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `secretsstorecsixk8 Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i secretsstorecsixk8sio-secretproviderclasspodstatus-editor appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=secrets-store.csi.x-k8s.io/v1 +$ helm upgrade -i secretsstorecsixk8sio-secretproviderclasspodstatus-editor appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=secrets-store.csi.x-k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i secretsstorecsixk8sio-secretproviderclasspodstatus-editor appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i secretsstorecsixk8sio-secretproviderclasspodstatus-editor appscode/secretsstorecsixk8sio-secretproviderclasspodstatus-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/settingsk8sio-podpreset-editor/Chart.yaml b/charts/settingsk8sio-podpreset-editor/Chart.yaml index 78eeb96370..c1b2a8f5b2 100644 --- a/charts/settingsk8sio-podpreset-editor/Chart.yaml +++ b/charts/settingsk8sio-podpreset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"settings.k8s.io","version":"v1alpha1","resource":"podpresets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PodPreset Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: settingsk8sio-podpreset-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/settingsk8sio-podpreset-editor/README.md b/charts/settingsk8sio-podpreset-editor/README.md index c6381d17db..91bfbcf110 100644 --- a/charts/settingsk8sio-podpreset-editor/README.md +++ b/charts/settingsk8sio-podpreset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/settingsk8sio-podpreset-editor --version=v0.23.0 -$ helm upgrade -i settingsk8sio-podpreset-editor appscode/settingsk8sio-podpreset-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/settingsk8sio-podpreset-editor --version=v0.24.0 +$ helm upgrade -i settingsk8sio-podpreset-editor appscode/settingsk8sio-podpreset-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PodPreset Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `settingsk8sio-podpreset-editor`: ```bash -$ helm upgrade -i settingsk8sio-podpreset-editor appscode/settingsk8sio-podpreset-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i settingsk8sio-podpreset-editor appscode/settingsk8sio-podpreset-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PodPreset Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `settingsk8sio-podp Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i settingsk8sio-podpreset-editor appscode/settingsk8sio-podpreset-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=settings.k8s.io/v1alpha1 +$ helm upgrade -i settingsk8sio-podpreset-editor appscode/settingsk8sio-podpreset-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=settings.k8s.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i settingsk8sio-podpreset-editor appscode/settingsk8sio-podpreset-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i settingsk8sio-podpreset-editor appscode/settingsk8sio-podpreset-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/snapshotstoragek8sio-volumesnapshot-editor/Chart.yaml b/charts/snapshotstoragek8sio-volumesnapshot-editor/Chart.yaml index 43d58f095b..4a8669f5e3 100644 --- a/charts/snapshotstoragek8sio-volumesnapshot-editor/Chart.yaml +++ b/charts/snapshotstoragek8sio-volumesnapshot-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"snapshot.storage.k8s.io","version":"v1","resource":"volumesnapshots"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VolumeSnapshot Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: snapshotstoragek8sio-volumesnapshot-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/snapshotstoragek8sio-volumesnapshot-editor/README.md b/charts/snapshotstoragek8sio-volumesnapshot-editor/README.md index 9e937abecf..5c753c8b28 100644 --- a/charts/snapshotstoragek8sio-volumesnapshot-editor/README.md +++ b/charts/snapshotstoragek8sio-volumesnapshot-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/snapshotstoragek8sio-volumesnapshot-editor --version=v0.23.0 -$ helm upgrade -i snapshotstoragek8sio-volumesnapshot-editor appscode/snapshotstoragek8sio-volumesnapshot-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/snapshotstoragek8sio-volumesnapshot-editor --version=v0.24.0 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshot-editor appscode/snapshotstoragek8sio-volumesnapshot-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VolumeSnapshot Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `snapshotstoragek8sio-volumesnapshot-editor`: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshot-editor appscode/snapshotstoragek8sio-volumesnapshot-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshot-editor appscode/snapshotstoragek8sio-volumesnapshot-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VolumeSnapshot Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `snapshotstoragek8s Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshot-editor appscode/snapshotstoragek8sio-volumesnapshot-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=snapshot.storage.k8s.io/v1 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshot-editor appscode/snapshotstoragek8sio-volumesnapshot-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=snapshot.storage.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshot-editor appscode/snapshotstoragek8sio-volumesnapshot-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i snapshotstoragek8sio-volumesnapshot-editor appscode/snapshotstoragek8sio-volumesnapshot-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/snapshotstoragek8sio-volumesnapshotclass-editor/Chart.yaml b/charts/snapshotstoragek8sio-volumesnapshotclass-editor/Chart.yaml index 4604ef159d..edc7a57ace 100644 --- a/charts/snapshotstoragek8sio-volumesnapshotclass-editor/Chart.yaml +++ b/charts/snapshotstoragek8sio-volumesnapshotclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"snapshot.storage.k8s.io","version":"v1","resource":"volumesnapshotclasses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VolumeSnapshotClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: snapshotstoragek8sio-volumesnapshotclass-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/snapshotstoragek8sio-volumesnapshotclass-editor/README.md b/charts/snapshotstoragek8sio-volumesnapshotclass-editor/README.md index f2aab5687a..2df04c7fde 100644 --- a/charts/snapshotstoragek8sio-volumesnapshotclass-editor/README.md +++ b/charts/snapshotstoragek8sio-volumesnapshotclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/snapshotstoragek8sio-volumesnapshotclass-editor --version=v0.23.0 -$ helm upgrade -i snapshotstoragek8sio-volumesnapshotclass-editor appscode/snapshotstoragek8sio-volumesnapshotclass-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/snapshotstoragek8sio-volumesnapshotclass-editor --version=v0.24.0 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshotclass-editor appscode/snapshotstoragek8sio-volumesnapshotclass-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VolumeSnapshotClass Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `snapshotstoragek8sio-volumesnapshotclass-editor`: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshotclass-editor appscode/snapshotstoragek8sio-volumesnapshotclass-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshotclass-editor appscode/snapshotstoragek8sio-volumesnapshotclass-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VolumeSnapshotClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `snapshotstoragek8s Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshotclass-editor appscode/snapshotstoragek8sio-volumesnapshotclass-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=snapshot.storage.k8s.io/v1 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshotclass-editor appscode/snapshotstoragek8sio-volumesnapshotclass-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=snapshot.storage.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshotclass-editor appscode/snapshotstoragek8sio-volumesnapshotclass-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i snapshotstoragek8sio-volumesnapshotclass-editor appscode/snapshotstoragek8sio-volumesnapshotclass-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/snapshotstoragek8sio-volumesnapshotcontent-editor/Chart.yaml b/charts/snapshotstoragek8sio-volumesnapshotcontent-editor/Chart.yaml index e3a3fe357d..0604f312f5 100644 --- a/charts/snapshotstoragek8sio-volumesnapshotcontent-editor/Chart.yaml +++ b/charts/snapshotstoragek8sio-volumesnapshotcontent-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"snapshot.storage.k8s.io","version":"v1","resource":"volumesnapshotcontents"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VolumeSnapshotContent Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: snapshotstoragek8sio-volumesnapshotcontent-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/snapshotstoragek8sio-volumesnapshotcontent-editor/README.md b/charts/snapshotstoragek8sio-volumesnapshotcontent-editor/README.md index ac20e1d771..fd13cb0fa9 100644 --- a/charts/snapshotstoragek8sio-volumesnapshotcontent-editor/README.md +++ b/charts/snapshotstoragek8sio-volumesnapshotcontent-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/snapshotstoragek8sio-volumesnapshotcontent-editor --version=v0.23.0 -$ helm upgrade -i snapshotstoragek8sio-volumesnapshotcontent-editor appscode/snapshotstoragek8sio-volumesnapshotcontent-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/snapshotstoragek8sio-volumesnapshotcontent-editor --version=v0.24.0 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshotcontent-editor appscode/snapshotstoragek8sio-volumesnapshotcontent-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VolumeSnapshotContent Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `snapshotstoragek8sio-volumesnapshotcontent-editor`: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshotcontent-editor appscode/snapshotstoragek8sio-volumesnapshotcontent-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshotcontent-editor appscode/snapshotstoragek8sio-volumesnapshotcontent-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VolumeSnapshotContent Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `snapshotstoragek8s Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshotcontent-editor appscode/snapshotstoragek8sio-volumesnapshotcontent-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=snapshot.storage.k8s.io/v1 +$ helm upgrade -i snapshotstoragek8sio-volumesnapshotcontent-editor appscode/snapshotstoragek8sio-volumesnapshotcontent-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=snapshot.storage.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i snapshotstoragek8sio-volumesnapshotcontent-editor appscode/snapshotstoragek8sio-volumesnapshotcontent-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i snapshotstoragek8sio-volumesnapshotcontent-editor appscode/snapshotstoragek8sio-volumesnapshotcontent-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/snsawskubedbcom-topic-editor/Chart.yaml b/charts/snsawskubedbcom-topic-editor/Chart.yaml index d898b21b8b..e1c5a2cd9a 100644 --- a/charts/snsawskubedbcom-topic-editor/Chart.yaml +++ b/charts/snsawskubedbcom-topic-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sns.aws.kubedb.com","version":"v1alpha1","resource":"topics"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Topic Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: snsawskubedbcom-topic-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/snsawskubedbcom-topic-editor/README.md b/charts/snsawskubedbcom-topic-editor/README.md index 76274fa42c..1a6ce47616 100644 --- a/charts/snsawskubedbcom-topic-editor/README.md +++ b/charts/snsawskubedbcom-topic-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/snsawskubedbcom-topic-editor --version=v0.23.0 -$ helm upgrade -i snsawskubedbcom-topic-editor appscode/snsawskubedbcom-topic-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/snsawskubedbcom-topic-editor --version=v0.24.0 +$ helm upgrade -i snsawskubedbcom-topic-editor appscode/snsawskubedbcom-topic-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Topic Editor on a [Kubernetes](http://kubernetes.io) cluste To install/upgrade the chart with the release name `snsawskubedbcom-topic-editor`: ```bash -$ helm upgrade -i snsawskubedbcom-topic-editor appscode/snsawskubedbcom-topic-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i snsawskubedbcom-topic-editor appscode/snsawskubedbcom-topic-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Topic Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `snsawskubedbcom-to Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i snsawskubedbcom-topic-editor appscode/snsawskubedbcom-topic-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sns.aws.kubedb.com/v1alpha1 +$ helm upgrade -i snsawskubedbcom-topic-editor appscode/snsawskubedbcom-topic-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sns.aws.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i snsawskubedbcom-topic-editor appscode/snsawskubedbcom-topic-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i snsawskubedbcom-topic-editor appscode/snsawskubedbcom-topic-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sourcetoolkitfluxcdio-bucket-editor/Chart.yaml b/charts/sourcetoolkitfluxcdio-bucket-editor/Chart.yaml index f711891bc9..58ecbb706d 100644 --- a/charts/sourcetoolkitfluxcdio-bucket-editor/Chart.yaml +++ b/charts/sourcetoolkitfluxcdio-bucket-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"source.toolkit.fluxcd.io","version":"v1beta2","resource":"buckets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Bucket Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sourcetoolkitfluxcdio-bucket-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sourcetoolkitfluxcdio-bucket-editor/README.md b/charts/sourcetoolkitfluxcdio-bucket-editor/README.md index d04f4104aa..047263c574 100644 --- a/charts/sourcetoolkitfluxcdio-bucket-editor/README.md +++ b/charts/sourcetoolkitfluxcdio-bucket-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sourcetoolkitfluxcdio-bucket-editor --version=v0.23.0 -$ helm upgrade -i sourcetoolkitfluxcdio-bucket-editor appscode/sourcetoolkitfluxcdio-bucket-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sourcetoolkitfluxcdio-bucket-editor --version=v0.24.0 +$ helm upgrade -i sourcetoolkitfluxcdio-bucket-editor appscode/sourcetoolkitfluxcdio-bucket-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Bucket Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `sourcetoolkitfluxcdio-bucket-editor`: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-bucket-editor appscode/sourcetoolkitfluxcdio-bucket-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sourcetoolkitfluxcdio-bucket-editor appscode/sourcetoolkitfluxcdio-bucket-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Bucket Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sourcetoolkitfluxc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-bucket-editor appscode/sourcetoolkitfluxcdio-bucket-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=source.toolkit.fluxcd.io/v1beta2 +$ helm upgrade -i sourcetoolkitfluxcdio-bucket-editor appscode/sourcetoolkitfluxcdio-bucket-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=source.toolkit.fluxcd.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-bucket-editor appscode/sourcetoolkitfluxcdio-bucket-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sourcetoolkitfluxcdio-bucket-editor appscode/sourcetoolkitfluxcdio-bucket-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sourcetoolkitfluxcdio-gitrepository-editor/Chart.yaml b/charts/sourcetoolkitfluxcdio-gitrepository-editor/Chart.yaml index 834b12de0c..d1435a8cf5 100644 --- a/charts/sourcetoolkitfluxcdio-gitrepository-editor/Chart.yaml +++ b/charts/sourcetoolkitfluxcdio-gitrepository-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"source.toolkit.fluxcd.io","version":"v1","resource":"gitrepositories"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: GitRepository Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sourcetoolkitfluxcdio-gitrepository-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sourcetoolkitfluxcdio-gitrepository-editor/README.md b/charts/sourcetoolkitfluxcdio-gitrepository-editor/README.md index 948d8b4da5..352005dd5c 100644 --- a/charts/sourcetoolkitfluxcdio-gitrepository-editor/README.md +++ b/charts/sourcetoolkitfluxcdio-gitrepository-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sourcetoolkitfluxcdio-gitrepository-editor --version=v0.23.0 -$ helm upgrade -i sourcetoolkitfluxcdio-gitrepository-editor appscode/sourcetoolkitfluxcdio-gitrepository-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sourcetoolkitfluxcdio-gitrepository-editor --version=v0.24.0 +$ helm upgrade -i sourcetoolkitfluxcdio-gitrepository-editor appscode/sourcetoolkitfluxcdio-gitrepository-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a GitRepository Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `sourcetoolkitfluxcdio-gitrepository-editor`: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-gitrepository-editor appscode/sourcetoolkitfluxcdio-gitrepository-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sourcetoolkitfluxcdio-gitrepository-editor appscode/sourcetoolkitfluxcdio-gitrepository-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a GitRepository Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sourcetoolkitfluxc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-gitrepository-editor appscode/sourcetoolkitfluxcdio-gitrepository-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=source.toolkit.fluxcd.io/v1 +$ helm upgrade -i sourcetoolkitfluxcdio-gitrepository-editor appscode/sourcetoolkitfluxcdio-gitrepository-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=source.toolkit.fluxcd.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-gitrepository-editor appscode/sourcetoolkitfluxcdio-gitrepository-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sourcetoolkitfluxcdio-gitrepository-editor appscode/sourcetoolkitfluxcdio-gitrepository-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sourcetoolkitfluxcdio-helmchart-editor/Chart.yaml b/charts/sourcetoolkitfluxcdio-helmchart-editor/Chart.yaml index e5f2da68c6..bd6f4d7716 100644 --- a/charts/sourcetoolkitfluxcdio-helmchart-editor/Chart.yaml +++ b/charts/sourcetoolkitfluxcdio-helmchart-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"source.toolkit.fluxcd.io","version":"v1","resource":"helmcharts"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: HelmChart Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sourcetoolkitfluxcdio-helmchart-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sourcetoolkitfluxcdio-helmchart-editor/README.md b/charts/sourcetoolkitfluxcdio-helmchart-editor/README.md index c53e6e8dcd..10417a0630 100644 --- a/charts/sourcetoolkitfluxcdio-helmchart-editor/README.md +++ b/charts/sourcetoolkitfluxcdio-helmchart-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sourcetoolkitfluxcdio-helmchart-editor --version=v0.23.0 -$ helm upgrade -i sourcetoolkitfluxcdio-helmchart-editor appscode/sourcetoolkitfluxcdio-helmchart-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sourcetoolkitfluxcdio-helmchart-editor --version=v0.24.0 +$ helm upgrade -i sourcetoolkitfluxcdio-helmchart-editor appscode/sourcetoolkitfluxcdio-helmchart-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HelmChart Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `sourcetoolkitfluxcdio-helmchart-editor`: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-helmchart-editor appscode/sourcetoolkitfluxcdio-helmchart-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sourcetoolkitfluxcdio-helmchart-editor appscode/sourcetoolkitfluxcdio-helmchart-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a HelmChart Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sourcetoolkitfluxc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-helmchart-editor appscode/sourcetoolkitfluxcdio-helmchart-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=source.toolkit.fluxcd.io/v1 +$ helm upgrade -i sourcetoolkitfluxcdio-helmchart-editor appscode/sourcetoolkitfluxcdio-helmchart-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=source.toolkit.fluxcd.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-helmchart-editor appscode/sourcetoolkitfluxcdio-helmchart-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sourcetoolkitfluxcdio-helmchart-editor appscode/sourcetoolkitfluxcdio-helmchart-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sourcetoolkitfluxcdio-helmrepository-editor/Chart.yaml b/charts/sourcetoolkitfluxcdio-helmrepository-editor/Chart.yaml index bca1e2b139..1d1a6a5164 100644 --- a/charts/sourcetoolkitfluxcdio-helmrepository-editor/Chart.yaml +++ b/charts/sourcetoolkitfluxcdio-helmrepository-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"source.toolkit.fluxcd.io","version":"v1","resource":"helmrepositories"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: HelmRepository Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sourcetoolkitfluxcdio-helmrepository-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sourcetoolkitfluxcdio-helmrepository-editor/README.md b/charts/sourcetoolkitfluxcdio-helmrepository-editor/README.md index 849dc7bf05..06ead5d6e4 100644 --- a/charts/sourcetoolkitfluxcdio-helmrepository-editor/README.md +++ b/charts/sourcetoolkitfluxcdio-helmrepository-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sourcetoolkitfluxcdio-helmrepository-editor --version=v0.23.0 -$ helm upgrade -i sourcetoolkitfluxcdio-helmrepository-editor appscode/sourcetoolkitfluxcdio-helmrepository-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sourcetoolkitfluxcdio-helmrepository-editor --version=v0.24.0 +$ helm upgrade -i sourcetoolkitfluxcdio-helmrepository-editor appscode/sourcetoolkitfluxcdio-helmrepository-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a HelmRepository Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `sourcetoolkitfluxcdio-helmrepository-editor`: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-helmrepository-editor appscode/sourcetoolkitfluxcdio-helmrepository-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sourcetoolkitfluxcdio-helmrepository-editor appscode/sourcetoolkitfluxcdio-helmrepository-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a HelmRepository Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sourcetoolkitfluxc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-helmrepository-editor appscode/sourcetoolkitfluxcdio-helmrepository-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=source.toolkit.fluxcd.io/v1 +$ helm upgrade -i sourcetoolkitfluxcdio-helmrepository-editor appscode/sourcetoolkitfluxcdio-helmrepository-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=source.toolkit.fluxcd.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-helmrepository-editor appscode/sourcetoolkitfluxcdio-helmrepository-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sourcetoolkitfluxcdio-helmrepository-editor appscode/sourcetoolkitfluxcdio-helmrepository-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sourcetoolkitfluxcdio-ocirepository-editor/Chart.yaml b/charts/sourcetoolkitfluxcdio-ocirepository-editor/Chart.yaml index c2b164501c..057c45431a 100644 --- a/charts/sourcetoolkitfluxcdio-ocirepository-editor/Chart.yaml +++ b/charts/sourcetoolkitfluxcdio-ocirepository-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"source.toolkit.fluxcd.io","version":"v1beta2","resource":"ocirepositories"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: OCIRepository Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sourcetoolkitfluxcdio-ocirepository-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sourcetoolkitfluxcdio-ocirepository-editor/README.md b/charts/sourcetoolkitfluxcdio-ocirepository-editor/README.md index 23009dc854..2fae5acfe0 100644 --- a/charts/sourcetoolkitfluxcdio-ocirepository-editor/README.md +++ b/charts/sourcetoolkitfluxcdio-ocirepository-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sourcetoolkitfluxcdio-ocirepository-editor --version=v0.23.0 -$ helm upgrade -i sourcetoolkitfluxcdio-ocirepository-editor appscode/sourcetoolkitfluxcdio-ocirepository-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sourcetoolkitfluxcdio-ocirepository-editor --version=v0.24.0 +$ helm upgrade -i sourcetoolkitfluxcdio-ocirepository-editor appscode/sourcetoolkitfluxcdio-ocirepository-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a OCIRepository Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `sourcetoolkitfluxcdio-ocirepository-editor`: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-ocirepository-editor appscode/sourcetoolkitfluxcdio-ocirepository-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sourcetoolkitfluxcdio-ocirepository-editor appscode/sourcetoolkitfluxcdio-ocirepository-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a OCIRepository Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sourcetoolkitfluxc Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-ocirepository-editor appscode/sourcetoolkitfluxcdio-ocirepository-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=source.toolkit.fluxcd.io/v1beta2 +$ helm upgrade -i sourcetoolkitfluxcdio-ocirepository-editor appscode/sourcetoolkitfluxcdio-ocirepository-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=source.toolkit.fluxcd.io/v1beta2 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sourcetoolkitfluxcdio-ocirepository-editor appscode/sourcetoolkitfluxcdio-ocirepository-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sourcetoolkitfluxcdio-ocirepository-editor appscode/sourcetoolkitfluxcdio-ocirepository-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/spannergcpkubedbcom-database-editor/Chart.yaml b/charts/spannergcpkubedbcom-database-editor/Chart.yaml index dc751f66a9..479f015d40 100644 --- a/charts/spannergcpkubedbcom-database-editor/Chart.yaml +++ b/charts/spannergcpkubedbcom-database-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"spanner.gcp.kubedb.com","version":"v1alpha1","resource":"databases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Database Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: spannergcpkubedbcom-database-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/spannergcpkubedbcom-database-editor/README.md b/charts/spannergcpkubedbcom-database-editor/README.md index e18c0b7b1f..d519d6cc38 100644 --- a/charts/spannergcpkubedbcom-database-editor/README.md +++ b/charts/spannergcpkubedbcom-database-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/spannergcpkubedbcom-database-editor --version=v0.23.0 -$ helm upgrade -i spannergcpkubedbcom-database-editor appscode/spannergcpkubedbcom-database-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/spannergcpkubedbcom-database-editor --version=v0.24.0 +$ helm upgrade -i spannergcpkubedbcom-database-editor appscode/spannergcpkubedbcom-database-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Database Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `spannergcpkubedbcom-database-editor`: ```bash -$ helm upgrade -i spannergcpkubedbcom-database-editor appscode/spannergcpkubedbcom-database-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i spannergcpkubedbcom-database-editor appscode/spannergcpkubedbcom-database-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Database Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `spannergcpkubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i spannergcpkubedbcom-database-editor appscode/spannergcpkubedbcom-database-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=spanner.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i spannergcpkubedbcom-database-editor appscode/spannergcpkubedbcom-database-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=spanner.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i spannergcpkubedbcom-database-editor appscode/spannergcpkubedbcom-database-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i spannergcpkubedbcom-database-editor appscode/spannergcpkubedbcom-database-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/spannergcpkubedbcom-databaseiammember-editor/Chart.yaml b/charts/spannergcpkubedbcom-databaseiammember-editor/Chart.yaml index be3dd44b2f..8d939d8336 100644 --- a/charts/spannergcpkubedbcom-databaseiammember-editor/Chart.yaml +++ b/charts/spannergcpkubedbcom-databaseiammember-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"spanner.gcp.kubedb.com","version":"v1alpha1","resource":"databaseiammembers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: DatabaseIAMMember Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: spannergcpkubedbcom-databaseiammember-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/spannergcpkubedbcom-databaseiammember-editor/README.md b/charts/spannergcpkubedbcom-databaseiammember-editor/README.md index afb35cda06..4f7811f4c2 100644 --- a/charts/spannergcpkubedbcom-databaseiammember-editor/README.md +++ b/charts/spannergcpkubedbcom-databaseiammember-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/spannergcpkubedbcom-databaseiammember-editor --version=v0.23.0 -$ helm upgrade -i spannergcpkubedbcom-databaseiammember-editor appscode/spannergcpkubedbcom-databaseiammember-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/spannergcpkubedbcom-databaseiammember-editor --version=v0.24.0 +$ helm upgrade -i spannergcpkubedbcom-databaseiammember-editor appscode/spannergcpkubedbcom-databaseiammember-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DatabaseIAMMember Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `spannergcpkubedbcom-databaseiammember-editor`: ```bash -$ helm upgrade -i spannergcpkubedbcom-databaseiammember-editor appscode/spannergcpkubedbcom-databaseiammember-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i spannergcpkubedbcom-databaseiammember-editor appscode/spannergcpkubedbcom-databaseiammember-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a DatabaseIAMMember Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `spannergcpkubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i spannergcpkubedbcom-databaseiammember-editor appscode/spannergcpkubedbcom-databaseiammember-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=spanner.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i spannergcpkubedbcom-databaseiammember-editor appscode/spannergcpkubedbcom-databaseiammember-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=spanner.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i spannergcpkubedbcom-databaseiammember-editor appscode/spannergcpkubedbcom-databaseiammember-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i spannergcpkubedbcom-databaseiammember-editor appscode/spannergcpkubedbcom-databaseiammember-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/spannergcpkubedbcom-instance-editor/Chart.yaml b/charts/spannergcpkubedbcom-instance-editor/Chart.yaml index 57cedb3a12..eb6d210d2d 100644 --- a/charts/spannergcpkubedbcom-instance-editor/Chart.yaml +++ b/charts/spannergcpkubedbcom-instance-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"spanner.gcp.kubedb.com","version":"v1alpha1","resource":"instances"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Instance Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: spannergcpkubedbcom-instance-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/spannergcpkubedbcom-instance-editor/README.md b/charts/spannergcpkubedbcom-instance-editor/README.md index 58d9d32328..35a37a05c2 100644 --- a/charts/spannergcpkubedbcom-instance-editor/README.md +++ b/charts/spannergcpkubedbcom-instance-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/spannergcpkubedbcom-instance-editor --version=v0.23.0 -$ helm upgrade -i spannergcpkubedbcom-instance-editor appscode/spannergcpkubedbcom-instance-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/spannergcpkubedbcom-instance-editor --version=v0.24.0 +$ helm upgrade -i spannergcpkubedbcom-instance-editor appscode/spannergcpkubedbcom-instance-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Instance Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `spannergcpkubedbcom-instance-editor`: ```bash -$ helm upgrade -i spannergcpkubedbcom-instance-editor appscode/spannergcpkubedbcom-instance-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i spannergcpkubedbcom-instance-editor appscode/spannergcpkubedbcom-instance-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Instance Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `spannergcpkubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i spannergcpkubedbcom-instance-editor appscode/spannergcpkubedbcom-instance-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=spanner.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i spannergcpkubedbcom-instance-editor appscode/spannergcpkubedbcom-instance-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=spanner.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i spannergcpkubedbcom-instance-editor appscode/spannergcpkubedbcom-instance-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i spannergcpkubedbcom-instance-editor appscode/spannergcpkubedbcom-instance-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/spannergcpkubedbcom-instanceiammember-editor/Chart.yaml b/charts/spannergcpkubedbcom-instanceiammember-editor/Chart.yaml index 2a7c7a3f99..833dcafb61 100644 --- a/charts/spannergcpkubedbcom-instanceiammember-editor/Chart.yaml +++ b/charts/spannergcpkubedbcom-instanceiammember-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"spanner.gcp.kubedb.com","version":"v1alpha1","resource":"instanceiammembers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: InstanceIAMMember Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: spannergcpkubedbcom-instanceiammember-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/spannergcpkubedbcom-instanceiammember-editor/README.md b/charts/spannergcpkubedbcom-instanceiammember-editor/README.md index 3ef2326824..9716586228 100644 --- a/charts/spannergcpkubedbcom-instanceiammember-editor/README.md +++ b/charts/spannergcpkubedbcom-instanceiammember-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/spannergcpkubedbcom-instanceiammember-editor --version=v0.23.0 -$ helm upgrade -i spannergcpkubedbcom-instanceiammember-editor appscode/spannergcpkubedbcom-instanceiammember-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/spannergcpkubedbcom-instanceiammember-editor --version=v0.24.0 +$ helm upgrade -i spannergcpkubedbcom-instanceiammember-editor appscode/spannergcpkubedbcom-instanceiammember-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a InstanceIAMMember Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `spannergcpkubedbcom-instanceiammember-editor`: ```bash -$ helm upgrade -i spannergcpkubedbcom-instanceiammember-editor appscode/spannergcpkubedbcom-instanceiammember-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i spannergcpkubedbcom-instanceiammember-editor appscode/spannergcpkubedbcom-instanceiammember-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a InstanceIAMMember Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `spannergcpkubedbco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i spannergcpkubedbcom-instanceiammember-editor appscode/spannergcpkubedbcom-instanceiammember-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=spanner.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i spannergcpkubedbcom-instanceiammember-editor appscode/spannergcpkubedbcom-instanceiammember-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=spanner.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i spannergcpkubedbcom-instanceiammember-editor appscode/spannergcpkubedbcom-instanceiammember-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i spannergcpkubedbcom-instanceiammember-editor appscode/spannergcpkubedbcom-instanceiammember-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqldatabase-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqldatabase-editor/Chart.yaml index 8cfbb47f3b..ef03586d55 100644 --- a/charts/sqlazurekubedbcom-mssqldatabase-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqldatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqldatabases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqldatabase-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqldatabase-editor/README.md b/charts/sqlazurekubedbcom-mssqldatabase-editor/README.md index 430d27a89c..d386a9ca29 100644 --- a/charts/sqlazurekubedbcom-mssqldatabase-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqldatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqldatabase-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqldatabase-editor appscode/sqlazurekubedbcom-mssqldatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqldatabase-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqldatabase-editor appscode/sqlazurekubedbcom-mssqldatabase-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLDatabase Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqldatabase-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqldatabase-editor appscode/sqlazurekubedbcom-mssqldatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqldatabase-editor appscode/sqlazurekubedbcom-mssqldatabase-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqldatabase-editor appscode/sqlazurekubedbcom-mssqldatabase-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqldatabase-editor appscode/sqlazurekubedbcom-mssqldatabase-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqldatabase-editor appscode/sqlazurekubedbcom-mssqldatabase-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqldatabase-editor appscode/sqlazurekubedbcom-mssqldatabase-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor/Chart.yaml index 890ae2e1b4..7f336ca5b7 100644 --- a/charts/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqldatabasevulnerabilityassessmentrulebaselines"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLDatabaseVulnerabilityAssessmentRuleBaseline Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor/README.md b/charts/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor/README.md index c8d6e95d5e..4589abb942 100644 --- a/charts/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLDatabaseVulnerabilityAssessmentRuleBaseline Editor on To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLDatabaseVulnerabilityAssessmentRuleBaseline Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor appscode/sqlazurekubedbcom-mssqldatabasevulnerabilityassessmentrulebaseline-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlelasticpool-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlelasticpool-editor/Chart.yaml index c8888df4e6..c496c78283 100644 --- a/charts/sqlazurekubedbcom-mssqlelasticpool-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlelasticpool-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlelasticpools"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLElasticPool Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlelasticpool-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqlelasticpool-editor/README.md b/charts/sqlazurekubedbcom-mssqlelasticpool-editor/README.md index be12ca2174..6f4a9bd849 100644 --- a/charts/sqlazurekubedbcom-mssqlelasticpool-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlelasticpool-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlelasticpool-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlelasticpool-editor appscode/sqlazurekubedbcom-mssqlelasticpool-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlelasticpool-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlelasticpool-editor appscode/sqlazurekubedbcom-mssqlelasticpool-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLElasticPool Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlelasticpool-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlelasticpool-editor appscode/sqlazurekubedbcom-mssqlelasticpool-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlelasticpool-editor appscode/sqlazurekubedbcom-mssqlelasticpool-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLElasticPool Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlelasticpool-editor appscode/sqlazurekubedbcom-mssqlelasticpool-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlelasticpool-editor appscode/sqlazurekubedbcom-mssqlelasticpool-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlelasticpool-editor appscode/sqlazurekubedbcom-mssqlelasticpool-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlelasticpool-editor appscode/sqlazurekubedbcom-mssqlelasticpool-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlfailovergroup-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlfailovergroup-editor/Chart.yaml index 3b59a74014..f5749e67e6 100644 --- a/charts/sqlazurekubedbcom-mssqlfailovergroup-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlfailovergroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlfailovergroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLFailoverGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlfailovergroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqlfailovergroup-editor/README.md b/charts/sqlazurekubedbcom-mssqlfailovergroup-editor/README.md index 0601ea7fad..848e5ba844 100644 --- a/charts/sqlazurekubedbcom-mssqlfailovergroup-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlfailovergroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlfailovergroup-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlfailovergroup-editor appscode/sqlazurekubedbcom-mssqlfailovergroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlfailovergroup-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlfailovergroup-editor appscode/sqlazurekubedbcom-mssqlfailovergroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLFailoverGroup Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlfailovergroup-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlfailovergroup-editor appscode/sqlazurekubedbcom-mssqlfailovergroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlfailovergroup-editor appscode/sqlazurekubedbcom-mssqlfailovergroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLFailoverGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlfailovergroup-editor appscode/sqlazurekubedbcom-mssqlfailovergroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlfailovergroup-editor appscode/sqlazurekubedbcom-mssqlfailovergroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlfailovergroup-editor appscode/sqlazurekubedbcom-mssqlfailovergroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlfailovergroup-editor appscode/sqlazurekubedbcom-mssqlfailovergroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlfirewallrule-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlfirewallrule-editor/Chart.yaml index 6da42fe523..6e61fe5279 100644 --- a/charts/sqlazurekubedbcom-mssqlfirewallrule-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlfirewallrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlfirewallrules"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLFirewallRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlfirewallrule-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqlfirewallrule-editor/README.md b/charts/sqlazurekubedbcom-mssqlfirewallrule-editor/README.md index 28175ce1ed..bdc36d4c55 100644 --- a/charts/sqlazurekubedbcom-mssqlfirewallrule-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlfirewallrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlfirewallrule-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlfirewallrule-editor appscode/sqlazurekubedbcom-mssqlfirewallrule-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlfirewallrule-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlfirewallrule-editor appscode/sqlazurekubedbcom-mssqlfirewallrule-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLFirewallRule Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlfirewallrule-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlfirewallrule-editor appscode/sqlazurekubedbcom-mssqlfirewallrule-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlfirewallrule-editor appscode/sqlazurekubedbcom-mssqlfirewallrule-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLFirewallRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlfirewallrule-editor appscode/sqlazurekubedbcom-mssqlfirewallrule-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlfirewallrule-editor appscode/sqlazurekubedbcom-mssqlfirewallrule-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlfirewallrule-editor appscode/sqlazurekubedbcom-mssqlfirewallrule-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlfirewallrule-editor appscode/sqlazurekubedbcom-mssqlfirewallrule-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqljobagent-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqljobagent-editor/Chart.yaml index 63405aa586..8437b01241 100644 --- a/charts/sqlazurekubedbcom-mssqljobagent-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqljobagent-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqljobagents"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLJobAgent Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqljobagent-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqljobagent-editor/README.md b/charts/sqlazurekubedbcom-mssqljobagent-editor/README.md index 56462a8989..1a6be6ce16 100644 --- a/charts/sqlazurekubedbcom-mssqljobagent-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqljobagent-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqljobagent-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqljobagent-editor appscode/sqlazurekubedbcom-mssqljobagent-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqljobagent-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqljobagent-editor appscode/sqlazurekubedbcom-mssqljobagent-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLJobAgent Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqljobagent-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqljobagent-editor appscode/sqlazurekubedbcom-mssqljobagent-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqljobagent-editor appscode/sqlazurekubedbcom-mssqljobagent-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLJobAgent Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqljobagent-editor appscode/sqlazurekubedbcom-mssqljobagent-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqljobagent-editor appscode/sqlazurekubedbcom-mssqljobagent-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqljobagent-editor appscode/sqlazurekubedbcom-mssqljobagent-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqljobagent-editor appscode/sqlazurekubedbcom-mssqljobagent-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqljobcredential-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqljobcredential-editor/Chart.yaml index 88e8cfeba8..14019bd133 100644 --- a/charts/sqlazurekubedbcom-mssqljobcredential-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqljobcredential-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqljobcredentials"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLJobCredential Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqljobcredential-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqljobcredential-editor/README.md b/charts/sqlazurekubedbcom-mssqljobcredential-editor/README.md index 23a05832cc..c8f561b8b5 100644 --- a/charts/sqlazurekubedbcom-mssqljobcredential-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqljobcredential-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqljobcredential-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqljobcredential-editor appscode/sqlazurekubedbcom-mssqljobcredential-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqljobcredential-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqljobcredential-editor appscode/sqlazurekubedbcom-mssqljobcredential-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLJobCredential Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqljobcredential-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqljobcredential-editor appscode/sqlazurekubedbcom-mssqljobcredential-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqljobcredential-editor appscode/sqlazurekubedbcom-mssqljobcredential-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLJobCredential Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqljobcredential-editor appscode/sqlazurekubedbcom-mssqljobcredential-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqljobcredential-editor appscode/sqlazurekubedbcom-mssqljobcredential-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqljobcredential-editor appscode/sqlazurekubedbcom-mssqljobcredential-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqljobcredential-editor appscode/sqlazurekubedbcom-mssqljobcredential-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlmanageddatabase-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlmanageddatabase-editor/Chart.yaml index 9432a7bbca..de68b6d7dd 100644 --- a/charts/sqlazurekubedbcom-mssqlmanageddatabase-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlmanageddatabase-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlmanageddatabases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLManagedDatabase Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlmanageddatabase-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqlmanageddatabase-editor/README.md b/charts/sqlazurekubedbcom-mssqlmanageddatabase-editor/README.md index 098d907814..65ff4daa58 100644 --- a/charts/sqlazurekubedbcom-mssqlmanageddatabase-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlmanageddatabase-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlmanageddatabase-editor appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanageddatabase-editor appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLManagedDatabase Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlmanageddatabase-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanageddatabase-editor appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanageddatabase-editor appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLManagedDatabase Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanageddatabase-editor appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanageddatabase-editor appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanageddatabase-editor appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlmanageddatabase-editor appscode/sqlazurekubedbcom-mssqlmanageddatabase-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlmanagedinstance-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlmanagedinstance-editor/Chart.yaml index 4d70d160da..452302c37f 100644 --- a/charts/sqlazurekubedbcom-mssqlmanagedinstance-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlmanagedinstance-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlmanagedinstances"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLManagedInstance Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlmanagedinstance-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqlmanagedinstance-editor/README.md b/charts/sqlazurekubedbcom-mssqlmanagedinstance-editor/README.md index c85497a5fd..5291507d8f 100644 --- a/charts/sqlazurekubedbcom-mssqlmanagedinstance-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlmanagedinstance-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstance-editor appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstance-editor appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLManagedInstance Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlmanagedinstance-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstance-editor appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstance-editor appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLManagedInstance Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstance-editor appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstance-editor appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstance-editor appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstance-editor appscode/sqlazurekubedbcom-mssqlmanagedinstance-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor/Chart.yaml index bc968681f9..a30cfaaa1f 100644 --- a/charts/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlmanagedinstanceactivedirectoryadministrators"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLManagedInstanceActiveDirectoryAdministrator Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor/README.md b/charts/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor/README.md index ccb7e8eead..fe083a4e30 100644 --- a/charts/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLManagedInstanceActiveDirectoryAdministrator Editor on To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLManagedInstanceActiveDirectoryAdministrator Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor appscode/sqlazurekubedbcom-mssqlmanagedinstanceactivedirectoryadministrator-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor/Chart.yaml index 33b430ce6b..3c4fe2df8c 100644 --- a/charts/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlmanagedinstancefailovergroups"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLManagedInstanceFailoverGroup Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor/README.md b/charts/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor/README.md index 28ee09fb2d..0dda8d484d 100644 --- a/charts/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLManagedInstanceFailoverGroup Editor on a [Kubernetes]( To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLManagedInstanceFailoverGroup Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancefailovergroup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor/Chart.yaml index f7a0a17b5d..4f4546e359 100644 --- a/charts/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlmanagedinstancevulnerabilityassessments"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLManagedInstanceVulnerabilityAssessment Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor/README.md b/charts/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor/README.md index 0714b4dc9e..999cff8e43 100644 --- a/charts/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLManagedInstanceVulnerabilityAssessment Editor on a [Ku To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLManagedInstanceVulnerabilityAssessment Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlmanagedinstancevulnerabilityassessment-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqloutboundfirewallrule-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqloutboundfirewallrule-editor/Chart.yaml index 2e0ea59bad..053545f797 100644 --- a/charts/sqlazurekubedbcom-mssqloutboundfirewallrule-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqloutboundfirewallrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqloutboundfirewallrules"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLOutboundFirewallRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqloutboundfirewallrule-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqloutboundfirewallrule-editor/README.md b/charts/sqlazurekubedbcom-mssqloutboundfirewallrule-editor/README.md index 00927c4519..d292ccab93 100644 --- a/charts/sqlazurekubedbcom-mssqloutboundfirewallrule-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqloutboundfirewallrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqloutboundfirewallrule-editor appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqloutboundfirewallrule-editor appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLOutboundFirewallRule Editor on a [Kubernetes](http://k To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqloutboundfirewallrule-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqloutboundfirewallrule-editor appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqloutboundfirewallrule-editor appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLOutboundFirewallRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqloutboundfirewallrule-editor appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqloutboundfirewallrule-editor appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqloutboundfirewallrule-editor appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqloutboundfirewallrule-editor appscode/sqlazurekubedbcom-mssqloutboundfirewallrule-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlserver-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlserver-editor/Chart.yaml index 9c345bd724..1a92e7e226 100644 --- a/charts/sqlazurekubedbcom-mssqlserver-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlserver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlservers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLServer Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlserver-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqlserver-editor/README.md b/charts/sqlazurekubedbcom-mssqlserver-editor/README.md index 6a05e86d2f..39ebc00585 100644 --- a/charts/sqlazurekubedbcom-mssqlserver-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlserver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlserver-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlserver-editor appscode/sqlazurekubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlserver-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlserver-editor appscode/sqlazurekubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServer Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlserver-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserver-editor appscode/sqlazurekubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlserver-editor appscode/sqlazurekubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLServer Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserver-editor appscode/sqlazurekubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlserver-editor appscode/sqlazurekubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserver-editor appscode/sqlazurekubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlserver-editor appscode/sqlazurekubedbcom-mssqlserver-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlserverdnsalias-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlserverdnsalias-editor/Chart.yaml index 2d584be8bd..b583c9dcbc 100644 --- a/charts/sqlazurekubedbcom-mssqlserverdnsalias-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlserverdnsalias-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlserverdnsaliases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLServerDNSAlias Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlserverdnsalias-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqlserverdnsalias-editor/README.md b/charts/sqlazurekubedbcom-mssqlserverdnsalias-editor/README.md index d21e7bdfb9..9bdfd31f4d 100644 --- a/charts/sqlazurekubedbcom-mssqlserverdnsalias-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlserverdnsalias-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlserverdnsalias-editor appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlserverdnsalias-editor appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerDNSAlias Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlserverdnsalias-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserverdnsalias-editor appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlserverdnsalias-editor appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLServerDNSAlias Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserverdnsalias-editor appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlserverdnsalias-editor appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserverdnsalias-editor appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlserverdnsalias-editor appscode/sqlazurekubedbcom-mssqlserverdnsalias-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor/Chart.yaml index 0cc3289950..258ea2c4b2 100644 --- a/charts/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlservermicrosoftsupportauditingpolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLServerMicrosoftSupportAuditingPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor/README.md b/charts/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor/README.md index ba7f885dcd..710e9a11a2 100644 --- a/charts/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerMicrosoftSupportAuditingPolicy Editor on a [Kube To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLServerMicrosoftSupportAuditingPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor appscode/sqlazurekubedbcom-mssqlservermicrosoftsupportauditingpolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor/Chart.yaml index 5128f220d9..2bd6545855 100644 --- a/charts/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlserversecurityalertpolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLServerSecurityAlertPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor/README.md b/charts/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor/README.md index fb7710447f..c748346bbb 100644 --- a/charts/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerSecurityAlertPolicy Editor on a [Kubernetes](htt To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLServerSecurityAlertPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor appscode/sqlazurekubedbcom-mssqlserversecurityalertpolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor/Chart.yaml index a7f9e0f3c7..b0d5fc686d 100644 --- a/charts/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlservertransparentdataencryptions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLServerTransparentDataEncryption Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlservertransparentdataencryption-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor/README.md b/charts/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor/README.md index 1585541d72..7632171e08 100644 --- a/charts/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlservertransparentdataencryption-editor appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlservertransparentdataencryption-editor appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerTransparentDataEncryption Editor on a [Kubernete To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlservertransparentdataencryption-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservertransparentdataencryption-editor appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlservertransparentdataencryption-editor appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLServerTransparentDataEncryption Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservertransparentdataencryption-editor appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlservertransparentdataencryption-editor appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservertransparentdataencryption-editor appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlservertransparentdataencryption-editor appscode/sqlazurekubedbcom-mssqlservertransparentdataencryption-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor/Chart.yaml index 20e13d01a4..89157c5f45 100644 --- a/charts/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlservervulnerabilityassessments"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLServerVulnerabilityAssessment Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor/README.md b/charts/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor/README.md index dbd8598ffe..6e0beae4b7 100644 --- a/charts/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLServerVulnerabilityAssessment Editor on a [Kubernetes] To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLServerVulnerabilityAssessment Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor appscode/sqlazurekubedbcom-mssqlservervulnerabilityassessment-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor/Chart.yaml b/charts/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor/Chart.yaml index b50a60be90..c8b19ff6c5 100644 --- a/charts/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor/Chart.yaml +++ b/charts/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.azure.kubedb.com","version":"v1alpha1","resource":"mssqlvirtualnetworkrules"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MSSQLVirtualNetworkRule Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlazurekubedbcom-mssqlvirtualnetworkrule-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor/README.md b/charts/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor/README.md index 9b86332aeb..5c80e7e38f 100644 --- a/charts/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor/README.md +++ b/charts/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor --version=v0.23.0 -$ helm upgrade -i sqlazurekubedbcom-mssqlvirtualnetworkrule-editor appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor --version=v0.24.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlvirtualnetworkrule-editor appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MSSQLVirtualNetworkRule Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `sqlazurekubedbcom-mssqlvirtualnetworkrule-editor`: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlvirtualnetworkrule-editor appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlazurekubedbcom-mssqlvirtualnetworkrule-editor appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MSSQLVirtualNetworkRule Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlazurekubedbcom- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlvirtualnetworkrule-editor appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 +$ helm upgrade -i sqlazurekubedbcom-mssqlvirtualnetworkrule-editor appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlazurekubedbcom-mssqlvirtualnetworkrule-editor appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlazurekubedbcom-mssqlvirtualnetworkrule-editor appscode/sqlazurekubedbcom-mssqlvirtualnetworkrule-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlgcpkubedbcom-database-editor/Chart.yaml b/charts/sqlgcpkubedbcom-database-editor/Chart.yaml index 88db985273..85502ac994 100644 --- a/charts/sqlgcpkubedbcom-database-editor/Chart.yaml +++ b/charts/sqlgcpkubedbcom-database-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.gcp.kubedb.com","version":"v1alpha1","resource":"databases"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Database Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlgcpkubedbcom-database-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlgcpkubedbcom-database-editor/README.md b/charts/sqlgcpkubedbcom-database-editor/README.md index 419795d85a..d6679739aa 100644 --- a/charts/sqlgcpkubedbcom-database-editor/README.md +++ b/charts/sqlgcpkubedbcom-database-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlgcpkubedbcom-database-editor --version=v0.23.0 -$ helm upgrade -i sqlgcpkubedbcom-database-editor appscode/sqlgcpkubedbcom-database-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlgcpkubedbcom-database-editor --version=v0.24.0 +$ helm upgrade -i sqlgcpkubedbcom-database-editor appscode/sqlgcpkubedbcom-database-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Database Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `sqlgcpkubedbcom-database-editor`: ```bash -$ helm upgrade -i sqlgcpkubedbcom-database-editor appscode/sqlgcpkubedbcom-database-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlgcpkubedbcom-database-editor appscode/sqlgcpkubedbcom-database-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Database Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlgcpkubedbcom-da Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-database-editor appscode/sqlgcpkubedbcom-database-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i sqlgcpkubedbcom-database-editor appscode/sqlgcpkubedbcom-database-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-database-editor appscode/sqlgcpkubedbcom-database-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlgcpkubedbcom-database-editor appscode/sqlgcpkubedbcom-database-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlgcpkubedbcom-databaseinstance-editor/Chart.yaml b/charts/sqlgcpkubedbcom-databaseinstance-editor/Chart.yaml index 93faee5cd2..6d5ace67d4 100644 --- a/charts/sqlgcpkubedbcom-databaseinstance-editor/Chart.yaml +++ b/charts/sqlgcpkubedbcom-databaseinstance-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.gcp.kubedb.com","version":"v1alpha1","resource":"databaseinstances"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: DatabaseInstance Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlgcpkubedbcom-databaseinstance-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlgcpkubedbcom-databaseinstance-editor/README.md b/charts/sqlgcpkubedbcom-databaseinstance-editor/README.md index a4fc10c03c..09a94d2ede 100644 --- a/charts/sqlgcpkubedbcom-databaseinstance-editor/README.md +++ b/charts/sqlgcpkubedbcom-databaseinstance-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlgcpkubedbcom-databaseinstance-editor --version=v0.23.0 -$ helm upgrade -i sqlgcpkubedbcom-databaseinstance-editor appscode/sqlgcpkubedbcom-databaseinstance-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlgcpkubedbcom-databaseinstance-editor --version=v0.24.0 +$ helm upgrade -i sqlgcpkubedbcom-databaseinstance-editor appscode/sqlgcpkubedbcom-databaseinstance-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DatabaseInstance Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `sqlgcpkubedbcom-databaseinstance-editor`: ```bash -$ helm upgrade -i sqlgcpkubedbcom-databaseinstance-editor appscode/sqlgcpkubedbcom-databaseinstance-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlgcpkubedbcom-databaseinstance-editor appscode/sqlgcpkubedbcom-databaseinstance-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a DatabaseInstance Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlgcpkubedbcom-da Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-databaseinstance-editor appscode/sqlgcpkubedbcom-databaseinstance-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i sqlgcpkubedbcom-databaseinstance-editor appscode/sqlgcpkubedbcom-databaseinstance-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-databaseinstance-editor appscode/sqlgcpkubedbcom-databaseinstance-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlgcpkubedbcom-databaseinstance-editor appscode/sqlgcpkubedbcom-databaseinstance-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlgcpkubedbcom-sourcerepresentationinstance-editor/Chart.yaml b/charts/sqlgcpkubedbcom-sourcerepresentationinstance-editor/Chart.yaml index 4f41816d29..9af2ead2bd 100644 --- a/charts/sqlgcpkubedbcom-sourcerepresentationinstance-editor/Chart.yaml +++ b/charts/sqlgcpkubedbcom-sourcerepresentationinstance-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.gcp.kubedb.com","version":"v1alpha1","resource":"sourcerepresentationinstances"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SourceRepresentationInstance Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlgcpkubedbcom-sourcerepresentationinstance-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlgcpkubedbcom-sourcerepresentationinstance-editor/README.md b/charts/sqlgcpkubedbcom-sourcerepresentationinstance-editor/README.md index 74da7e03e5..9f9f0b1d63 100644 --- a/charts/sqlgcpkubedbcom-sourcerepresentationinstance-editor/README.md +++ b/charts/sqlgcpkubedbcom-sourcerepresentationinstance-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor --version=v0.23.0 -$ helm upgrade -i sqlgcpkubedbcom-sourcerepresentationinstance-editor appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor --version=v0.24.0 +$ helm upgrade -i sqlgcpkubedbcom-sourcerepresentationinstance-editor appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SourceRepresentationInstance Editor on a [Kubernetes](http: To install/upgrade the chart with the release name `sqlgcpkubedbcom-sourcerepresentationinstance-editor`: ```bash -$ helm upgrade -i sqlgcpkubedbcom-sourcerepresentationinstance-editor appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlgcpkubedbcom-sourcerepresentationinstance-editor appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SourceRepresentationInstance Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlgcpkubedbcom-so Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-sourcerepresentationinstance-editor appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i sqlgcpkubedbcom-sourcerepresentationinstance-editor appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-sourcerepresentationinstance-editor appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlgcpkubedbcom-sourcerepresentationinstance-editor appscode/sqlgcpkubedbcom-sourcerepresentationinstance-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlgcpkubedbcom-sslcert-editor/Chart.yaml b/charts/sqlgcpkubedbcom-sslcert-editor/Chart.yaml index 1fe7fbf79e..2d16cdc11b 100644 --- a/charts/sqlgcpkubedbcom-sslcert-editor/Chart.yaml +++ b/charts/sqlgcpkubedbcom-sslcert-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.gcp.kubedb.com","version":"v1alpha1","resource":"sslcerts"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: SSLCert Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlgcpkubedbcom-sslcert-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlgcpkubedbcom-sslcert-editor/README.md b/charts/sqlgcpkubedbcom-sslcert-editor/README.md index 2d974a9392..20b6323cae 100644 --- a/charts/sqlgcpkubedbcom-sslcert-editor/README.md +++ b/charts/sqlgcpkubedbcom-sslcert-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlgcpkubedbcom-sslcert-editor --version=v0.23.0 -$ helm upgrade -i sqlgcpkubedbcom-sslcert-editor appscode/sqlgcpkubedbcom-sslcert-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlgcpkubedbcom-sslcert-editor --version=v0.24.0 +$ helm upgrade -i sqlgcpkubedbcom-sslcert-editor appscode/sqlgcpkubedbcom-sslcert-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a SSLCert Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `sqlgcpkubedbcom-sslcert-editor`: ```bash -$ helm upgrade -i sqlgcpkubedbcom-sslcert-editor appscode/sqlgcpkubedbcom-sslcert-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlgcpkubedbcom-sslcert-editor appscode/sqlgcpkubedbcom-sslcert-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a SSLCert Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlgcpkubedbcom-ss Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-sslcert-editor appscode/sqlgcpkubedbcom-sslcert-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i sqlgcpkubedbcom-sslcert-editor appscode/sqlgcpkubedbcom-sslcert-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-sslcert-editor appscode/sqlgcpkubedbcom-sslcert-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlgcpkubedbcom-sslcert-editor appscode/sqlgcpkubedbcom-sslcert-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/sqlgcpkubedbcom-user-editor/Chart.yaml b/charts/sqlgcpkubedbcom-user-editor/Chart.yaml index 08f51bdc11..5b85f10d7c 100644 --- a/charts/sqlgcpkubedbcom-user-editor/Chart.yaml +++ b/charts/sqlgcpkubedbcom-user-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"sql.gcp.kubedb.com","version":"v1alpha1","resource":"users"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: User Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: sqlgcpkubedbcom-user-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/sqlgcpkubedbcom-user-editor/README.md b/charts/sqlgcpkubedbcom-user-editor/README.md index cf1ae30464..c0858c9ccd 100644 --- a/charts/sqlgcpkubedbcom-user-editor/README.md +++ b/charts/sqlgcpkubedbcom-user-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/sqlgcpkubedbcom-user-editor --version=v0.23.0 -$ helm upgrade -i sqlgcpkubedbcom-user-editor appscode/sqlgcpkubedbcom-user-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/sqlgcpkubedbcom-user-editor --version=v0.24.0 +$ helm upgrade -i sqlgcpkubedbcom-user-editor appscode/sqlgcpkubedbcom-user-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a User Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `sqlgcpkubedbcom-user-editor`: ```bash -$ helm upgrade -i sqlgcpkubedbcom-user-editor appscode/sqlgcpkubedbcom-user-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i sqlgcpkubedbcom-user-editor appscode/sqlgcpkubedbcom-user-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a User Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `sqlgcpkubedbcom-us Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-user-editor appscode/sqlgcpkubedbcom-user-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 +$ helm upgrade -i sqlgcpkubedbcom-user-editor appscode/sqlgcpkubedbcom-user-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=sql.gcp.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i sqlgcpkubedbcom-user-editor appscode/sqlgcpkubedbcom-user-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i sqlgcpkubedbcom-user-editor appscode/sqlgcpkubedbcom-user-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-backupbatch-editor/Chart.yaml b/charts/stashappscodecom-backupbatch-editor/Chart.yaml index 5c4c19f41d..1d27db2df8 100644 --- a/charts/stashappscodecom-backupbatch-editor/Chart.yaml +++ b/charts/stashappscodecom-backupbatch-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1beta1","resource":"backupbatches"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: BackupBatch Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-backupbatch-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/stashappscodecom-backupbatch-editor/README.md b/charts/stashappscodecom-backupbatch-editor/README.md index 8484c9dfe2..10a5e141bb 100644 --- a/charts/stashappscodecom-backupbatch-editor/README.md +++ b/charts/stashappscodecom-backupbatch-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-backupbatch-editor --version=v0.23.0 -$ helm upgrade -i stashappscodecom-backupbatch-editor appscode/stashappscodecom-backupbatch-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/stashappscodecom-backupbatch-editor --version=v0.24.0 +$ helm upgrade -i stashappscodecom-backupbatch-editor appscode/stashappscodecom-backupbatch-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupBatch Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `stashappscodecom-backupbatch-editor`: ```bash -$ helm upgrade -i stashappscodecom-backupbatch-editor appscode/stashappscodecom-backupbatch-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i stashappscodecom-backupbatch-editor appscode/stashappscodecom-backupbatch-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a BackupBatch Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-backupbatch-editor appscode/stashappscodecom-backupbatch-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=stash.appscode.com/v1beta1 +$ helm upgrade -i stashappscodecom-backupbatch-editor appscode/stashappscodecom-backupbatch-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=stash.appscode.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-backupbatch-editor appscode/stashappscodecom-backupbatch-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i stashappscodecom-backupbatch-editor appscode/stashappscodecom-backupbatch-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-backupblueprint-editor/Chart.yaml b/charts/stashappscodecom-backupblueprint-editor/Chart.yaml index 318701f677..937b462d17 100644 --- a/charts/stashappscodecom-backupblueprint-editor/Chart.yaml +++ b/charts/stashappscodecom-backupblueprint-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1beta1","resource":"backupblueprints"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: BackupBlueprint Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-backupblueprint-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/stashappscodecom-backupblueprint-editor/README.md b/charts/stashappscodecom-backupblueprint-editor/README.md index 444b57d279..b677770b75 100644 --- a/charts/stashappscodecom-backupblueprint-editor/README.md +++ b/charts/stashappscodecom-backupblueprint-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-backupblueprint-editor --version=v0.23.0 -$ helm upgrade -i stashappscodecom-backupblueprint-editor appscode/stashappscodecom-backupblueprint-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/stashappscodecom-backupblueprint-editor --version=v0.24.0 +$ helm upgrade -i stashappscodecom-backupblueprint-editor appscode/stashappscodecom-backupblueprint-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupBlueprint Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `stashappscodecom-backupblueprint-editor`: ```bash -$ helm upgrade -i stashappscodecom-backupblueprint-editor appscode/stashappscodecom-backupblueprint-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i stashappscodecom-backupblueprint-editor appscode/stashappscodecom-backupblueprint-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a BackupBlueprint Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-backupblueprint-editor appscode/stashappscodecom-backupblueprint-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=stash.appscode.com/v1beta1 +$ helm upgrade -i stashappscodecom-backupblueprint-editor appscode/stashappscodecom-backupblueprint-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=stash.appscode.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-backupblueprint-editor appscode/stashappscodecom-backupblueprint-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i stashappscodecom-backupblueprint-editor appscode/stashappscodecom-backupblueprint-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-backupconfiguration-editor/Chart.yaml b/charts/stashappscodecom-backupconfiguration-editor/Chart.yaml index 85bab06600..82b1fcc93d 100644 --- a/charts/stashappscodecom-backupconfiguration-editor/Chart.yaml +++ b/charts/stashappscodecom-backupconfiguration-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1beta1","resource":"backupconfigurations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: BackupConfiguration Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-backupconfiguration-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/stashappscodecom-backupconfiguration-editor/README.md b/charts/stashappscodecom-backupconfiguration-editor/README.md index 43a70dbe4b..b38e04579d 100644 --- a/charts/stashappscodecom-backupconfiguration-editor/README.md +++ b/charts/stashappscodecom-backupconfiguration-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-backupconfiguration-editor --version=v0.23.0 -$ helm upgrade -i stashappscodecom-backupconfiguration-editor appscode/stashappscodecom-backupconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/stashappscodecom-backupconfiguration-editor --version=v0.24.0 +$ helm upgrade -i stashappscodecom-backupconfiguration-editor appscode/stashappscodecom-backupconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupConfiguration Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `stashappscodecom-backupconfiguration-editor`: ```bash -$ helm upgrade -i stashappscodecom-backupconfiguration-editor appscode/stashappscodecom-backupconfiguration-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i stashappscodecom-backupconfiguration-editor appscode/stashappscodecom-backupconfiguration-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a BackupConfiguration Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-backupconfiguration-editor appscode/stashappscodecom-backupconfiguration-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=stash.appscode.com/v1beta1 +$ helm upgrade -i stashappscodecom-backupconfiguration-editor appscode/stashappscodecom-backupconfiguration-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=stash.appscode.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-backupconfiguration-editor appscode/stashappscodecom-backupconfiguration-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i stashappscodecom-backupconfiguration-editor appscode/stashappscodecom-backupconfiguration-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-backupsession-editor/Chart.yaml b/charts/stashappscodecom-backupsession-editor/Chart.yaml index 1124289a70..b9fb426eb5 100644 --- a/charts/stashappscodecom-backupsession-editor/Chart.yaml +++ b/charts/stashappscodecom-backupsession-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1beta1","resource":"backupsessions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: BackupSession Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-backupsession-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/stashappscodecom-backupsession-editor/README.md b/charts/stashappscodecom-backupsession-editor/README.md index b69754fb0f..10fa733d2b 100644 --- a/charts/stashappscodecom-backupsession-editor/README.md +++ b/charts/stashappscodecom-backupsession-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-backupsession-editor --version=v0.23.0 -$ helm upgrade -i stashappscodecom-backupsession-editor appscode/stashappscodecom-backupsession-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/stashappscodecom-backupsession-editor --version=v0.24.0 +$ helm upgrade -i stashappscodecom-backupsession-editor appscode/stashappscodecom-backupsession-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupSession Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `stashappscodecom-backupsession-editor`: ```bash -$ helm upgrade -i stashappscodecom-backupsession-editor appscode/stashappscodecom-backupsession-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i stashappscodecom-backupsession-editor appscode/stashappscodecom-backupsession-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a BackupSession Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-b Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-backupsession-editor appscode/stashappscodecom-backupsession-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=stash.appscode.com/v1beta1 +$ helm upgrade -i stashappscodecom-backupsession-editor appscode/stashappscodecom-backupsession-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=stash.appscode.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-backupsession-editor appscode/stashappscodecom-backupsession-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i stashappscodecom-backupsession-editor appscode/stashappscodecom-backupsession-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-function-editor/Chart.yaml b/charts/stashappscodecom-function-editor/Chart.yaml index fc983c73ba..93c970b891 100644 --- a/charts/stashappscodecom-function-editor/Chart.yaml +++ b/charts/stashappscodecom-function-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1beta1","resource":"functions"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Function Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-function-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/stashappscodecom-function-editor/README.md b/charts/stashappscodecom-function-editor/README.md index e6ed1f57be..25a10e901e 100644 --- a/charts/stashappscodecom-function-editor/README.md +++ b/charts/stashappscodecom-function-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-function-editor --version=v0.23.0 -$ helm upgrade -i stashappscodecom-function-editor appscode/stashappscodecom-function-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/stashappscodecom-function-editor --version=v0.24.0 +$ helm upgrade -i stashappscodecom-function-editor appscode/stashappscodecom-function-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Function Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `stashappscodecom-function-editor`: ```bash -$ helm upgrade -i stashappscodecom-function-editor appscode/stashappscodecom-function-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i stashappscodecom-function-editor appscode/stashappscodecom-function-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Function Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-function-editor appscode/stashappscodecom-function-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=stash.appscode.com/v1beta1 +$ helm upgrade -i stashappscodecom-function-editor appscode/stashappscodecom-function-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=stash.appscode.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-function-editor appscode/stashappscodecom-function-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i stashappscodecom-function-editor appscode/stashappscodecom-function-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-recovery-editor/Chart.yaml b/charts/stashappscodecom-recovery-editor/Chart.yaml index 18bb05b779..152715a0da 100644 --- a/charts/stashappscodecom-recovery-editor/Chart.yaml +++ b/charts/stashappscodecom-recovery-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1alpha1","resource":"recoveries"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Recovery Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-recovery-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/stashappscodecom-recovery-editor/README.md b/charts/stashappscodecom-recovery-editor/README.md index ed592bbbe5..cebeec1fb1 100644 --- a/charts/stashappscodecom-recovery-editor/README.md +++ b/charts/stashappscodecom-recovery-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-recovery-editor --version=v0.23.0 -$ helm upgrade -i stashappscodecom-recovery-editor appscode/stashappscodecom-recovery-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/stashappscodecom-recovery-editor --version=v0.24.0 +$ helm upgrade -i stashappscodecom-recovery-editor appscode/stashappscodecom-recovery-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Recovery Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `stashappscodecom-recovery-editor`: ```bash -$ helm upgrade -i stashappscodecom-recovery-editor appscode/stashappscodecom-recovery-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i stashappscodecom-recovery-editor appscode/stashappscodecom-recovery-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Recovery Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-recovery-editor appscode/stashappscodecom-recovery-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=stash.appscode.com/v1alpha1 +$ helm upgrade -i stashappscodecom-recovery-editor appscode/stashappscodecom-recovery-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=stash.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-recovery-editor appscode/stashappscodecom-recovery-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i stashappscodecom-recovery-editor appscode/stashappscodecom-recovery-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-repository-editor-options/Chart.yaml b/charts/stashappscodecom-repository-editor-options/Chart.yaml index 4686ed2cf9..9daa896c67 100644 --- a/charts/stashappscodecom-repository-editor-options/Chart.yaml +++ b/charts/stashappscodecom-repository-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: stashappscodecom-repository-editor-options description: Stash Repository Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/stashappscodecom-repository-editor-options/README.md b/charts/stashappscodecom-repository-editor-options/README.md index a4bfc3c793..8ca6feabfa 100644 --- a/charts/stashappscodecom-repository-editor-options/README.md +++ b/charts/stashappscodecom-repository-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-repository-editor-options --version=v0.23.0 -$ helm upgrade -i stashappscodecom-repository-editor-options appscode/stashappscodecom-repository-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/stashappscodecom-repository-editor-options --version=v0.24.0 +$ helm upgrade -i stashappscodecom-repository-editor-options appscode/stashappscodecom-repository-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Stash Repository Editor UI Options on a [Kubernetes](http:/ To install/upgrade the chart with the release name `stashappscodecom-repository-editor-options`: ```bash -$ helm upgrade -i stashappscodecom-repository-editor-options appscode/stashappscodecom-repository-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i stashappscodecom-repository-editor-options appscode/stashappscodecom-repository-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Stash Repository Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -92,12 +92,12 @@ The following table lists the configurable parameters of the `stashappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-repository-editor-options appscode/stashappscodecom-repository-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=stash.appscode.com +$ helm upgrade -i stashappscodecom-repository-editor-options appscode/stashappscodecom-repository-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=stash.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-repository-editor-options appscode/stashappscodecom-repository-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i stashappscodecom-repository-editor-options appscode/stashappscodecom-repository-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-repository-editor/Chart.yaml b/charts/stashappscodecom-repository-editor/Chart.yaml index af7e1d38ce..b6586455a4 100644 --- a/charts/stashappscodecom-repository-editor/Chart.yaml +++ b/charts/stashappscodecom-repository-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ \ stash.appscode.com\n kind: Repository\n version: v1alpha1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Repository Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: stashappscodecom-repository-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/stashappscodecom-repository-editor/README.md b/charts/stashappscodecom-repository-editor/README.md index 5d743a26f9..6b262b22b4 100644 --- a/charts/stashappscodecom-repository-editor/README.md +++ b/charts/stashappscodecom-repository-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-repository-editor --version=v0.23.0 -$ helm upgrade -i stashappscodecom-repository-editor appscode/stashappscodecom-repository-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/stashappscodecom-repository-editor --version=v0.24.0 +$ helm upgrade -i stashappscodecom-repository-editor appscode/stashappscodecom-repository-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Repository Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `stashappscodecom-repository-editor`: ```bash -$ helm upgrade -i stashappscodecom-repository-editor appscode/stashappscodecom-repository-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i stashappscodecom-repository-editor appscode/stashappscodecom-repository-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Repository Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -61,12 +61,12 @@ The following table lists the configurable parameters of the `stashappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-repository-editor appscode/stashappscodecom-repository-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=stash.appscode.com +$ helm upgrade -i stashappscodecom-repository-editor appscode/stashappscodecom-repository-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=stash.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-repository-editor appscode/stashappscodecom-repository-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i stashappscodecom-repository-editor appscode/stashappscodecom-repository-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-restic-editor/Chart.yaml b/charts/stashappscodecom-restic-editor/Chart.yaml index 3150366efc..960d5c00c3 100644 --- a/charts/stashappscodecom-restic-editor/Chart.yaml +++ b/charts/stashappscodecom-restic-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1alpha1","resource":"restics"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Restic Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-restic-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/stashappscodecom-restic-editor/README.md b/charts/stashappscodecom-restic-editor/README.md index 71a21219dd..95004e696b 100644 --- a/charts/stashappscodecom-restic-editor/README.md +++ b/charts/stashappscodecom-restic-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-restic-editor --version=v0.23.0 -$ helm upgrade -i stashappscodecom-restic-editor appscode/stashappscodecom-restic-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/stashappscodecom-restic-editor --version=v0.24.0 +$ helm upgrade -i stashappscodecom-restic-editor appscode/stashappscodecom-restic-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Restic Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `stashappscodecom-restic-editor`: ```bash -$ helm upgrade -i stashappscodecom-restic-editor appscode/stashappscodecom-restic-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i stashappscodecom-restic-editor appscode/stashappscodecom-restic-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Restic Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-restic-editor appscode/stashappscodecom-restic-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=stash.appscode.com/v1alpha1 +$ helm upgrade -i stashappscodecom-restic-editor appscode/stashappscodecom-restic-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=stash.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-restic-editor appscode/stashappscodecom-restic-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i stashappscodecom-restic-editor appscode/stashappscodecom-restic-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-restorebatch-editor/Chart.yaml b/charts/stashappscodecom-restorebatch-editor/Chart.yaml index 6d1030ac42..252c00c89e 100644 --- a/charts/stashappscodecom-restorebatch-editor/Chart.yaml +++ b/charts/stashappscodecom-restorebatch-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1beta1","resource":"restorebatches"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RestoreBatch Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-restorebatch-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/stashappscodecom-restorebatch-editor/README.md b/charts/stashappscodecom-restorebatch-editor/README.md index dcc33ef254..5e35e764e1 100644 --- a/charts/stashappscodecom-restorebatch-editor/README.md +++ b/charts/stashappscodecom-restorebatch-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-restorebatch-editor --version=v0.23.0 -$ helm upgrade -i stashappscodecom-restorebatch-editor appscode/stashappscodecom-restorebatch-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/stashappscodecom-restorebatch-editor --version=v0.24.0 +$ helm upgrade -i stashappscodecom-restorebatch-editor appscode/stashappscodecom-restorebatch-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RestoreBatch Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `stashappscodecom-restorebatch-editor`: ```bash -$ helm upgrade -i stashappscodecom-restorebatch-editor appscode/stashappscodecom-restorebatch-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i stashappscodecom-restorebatch-editor appscode/stashappscodecom-restorebatch-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RestoreBatch Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-restorebatch-editor appscode/stashappscodecom-restorebatch-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=stash.appscode.com/v1beta1 +$ helm upgrade -i stashappscodecom-restorebatch-editor appscode/stashappscodecom-restorebatch-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=stash.appscode.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-restorebatch-editor appscode/stashappscodecom-restorebatch-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i stashappscodecom-restorebatch-editor appscode/stashappscodecom-restorebatch-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-restoresession-editor-options/Chart.yaml b/charts/stashappscodecom-restoresession-editor-options/Chart.yaml index 6d5f5932c6..235846de2e 100644 --- a/charts/stashappscodecom-restoresession-editor-options/Chart.yaml +++ b/charts/stashappscodecom-restoresession-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: stashappscodecom-restoresession-editor-options description: Stash RestoreSession Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/stashappscodecom-restoresession-editor-options/README.md b/charts/stashappscodecom-restoresession-editor-options/README.md index 126507be3c..ad75210944 100644 --- a/charts/stashappscodecom-restoresession-editor-options/README.md +++ b/charts/stashappscodecom-restoresession-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-restoresession-editor-options --version=v0.23.0 -$ helm upgrade -i stashappscodecom-restoresession-editor-options appscode/stashappscodecom-restoresession-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/stashappscodecom-restoresession-editor-options --version=v0.24.0 +$ helm upgrade -i stashappscodecom-restoresession-editor-options appscode/stashappscodecom-restoresession-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Stash RestoreSession Editor UI Options on a [Kubernetes](ht To install/upgrade the chart with the release name `stashappscodecom-restoresession-editor-options`: ```bash -$ helm upgrade -i stashappscodecom-restoresession-editor-options appscode/stashappscodecom-restoresession-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i stashappscodecom-restoresession-editor-options appscode/stashappscodecom-restoresession-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Stash RestoreSession Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -65,12 +65,12 @@ The following table lists the configurable parameters of the `stashappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-restoresession-editor-options appscode/stashappscodecom-restoresession-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=stash.appscode.com +$ helm upgrade -i stashappscodecom-restoresession-editor-options appscode/stashappscodecom-restoresession-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=stash.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-restoresession-editor-options appscode/stashappscodecom-restoresession-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i stashappscodecom-restoresession-editor-options appscode/stashappscodecom-restoresession-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-restoresession-editor-options/ui/create-ui.yaml b/charts/stashappscodecom-restoresession-editor-options/ui/create-ui.yaml index 72ef41ca17..ff755104e2 100644 --- a/charts/stashappscodecom-restoresession-editor-options/ui/create-ui.yaml +++ b/charts/stashappscodecom-restoresession-editor-options/ui/create-ui.yaml @@ -122,7 +122,7 @@ steps: - alias: database-restore-runtime-settings chart: name: uibytebuildersdev-component-database-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: schema#/properties/metadata/properties/release/properties/namespace diff --git a/charts/stashappscodecom-restoresession-editor/Chart.yaml b/charts/stashappscodecom-restoresession-editor/Chart.yaml index a335b96a49..5973f9c48d 100644 --- a/charts/stashappscodecom-restoresession-editor/Chart.yaml +++ b/charts/stashappscodecom-restoresession-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: stash.appscode.com\n kind: RestoreSession\n\ \ version: v1beta1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RestoreSession Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: stashappscodecom-restoresession-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/stashappscodecom-restoresession-editor/README.md b/charts/stashappscodecom-restoresession-editor/README.md index 5a43e4f32d..79906bef0f 100644 --- a/charts/stashappscodecom-restoresession-editor/README.md +++ b/charts/stashappscodecom-restoresession-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-restoresession-editor --version=v0.23.0 -$ helm upgrade -i stashappscodecom-restoresession-editor appscode/stashappscodecom-restoresession-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/stashappscodecom-restoresession-editor --version=v0.24.0 +$ helm upgrade -i stashappscodecom-restoresession-editor appscode/stashappscodecom-restoresession-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RestoreSession Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `stashappscodecom-restoresession-editor`: ```bash -$ helm upgrade -i stashappscodecom-restoresession-editor appscode/stashappscodecom-restoresession-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i stashappscodecom-restoresession-editor appscode/stashappscodecom-restoresession-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RestoreSession Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -60,12 +60,12 @@ The following table lists the configurable parameters of the `stashappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-restoresession-editor appscode/stashappscodecom-restoresession-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=stash.appscode.com +$ helm upgrade -i stashappscodecom-restoresession-editor appscode/stashappscodecom-restoresession-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=stash.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-restoresession-editor appscode/stashappscodecom-restoresession-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i stashappscodecom-restoresession-editor appscode/stashappscodecom-restoresession-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/stashappscodecom-task-editor/Chart.yaml b/charts/stashappscodecom-task-editor/Chart.yaml index 2be9f48ae8..f62effab2d 100644 --- a/charts/stashappscodecom-task-editor/Chart.yaml +++ b/charts/stashappscodecom-task-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"stash.appscode.com","version":"v1beta1","resource":"tasks"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Task Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: stashappscodecom-task-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/stashappscodecom-task-editor/README.md b/charts/stashappscodecom-task-editor/README.md index 30d289021f..e6cf143dde 100644 --- a/charts/stashappscodecom-task-editor/README.md +++ b/charts/stashappscodecom-task-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/stashappscodecom-task-editor --version=v0.23.0 -$ helm upgrade -i stashappscodecom-task-editor appscode/stashappscodecom-task-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/stashappscodecom-task-editor --version=v0.24.0 +$ helm upgrade -i stashappscodecom-task-editor appscode/stashappscodecom-task-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Task Editor on a [Kubernetes](http://kubernetes.io) cluster To install/upgrade the chart with the release name `stashappscodecom-task-editor`: ```bash -$ helm upgrade -i stashappscodecom-task-editor appscode/stashappscodecom-task-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i stashappscodecom-task-editor appscode/stashappscodecom-task-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Task Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `stashappscodecom-t Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i stashappscodecom-task-editor appscode/stashappscodecom-task-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=stash.appscode.com/v1beta1 +$ helm upgrade -i stashappscodecom-task-editor appscode/stashappscodecom-task-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=stash.appscode.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i stashappscodecom-task-editor appscode/stashappscodecom-task-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i stashappscodecom-task-editor appscode/stashappscodecom-task-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/statusgatekeepersh-constraintpodstatus-editor/Chart.yaml b/charts/statusgatekeepersh-constraintpodstatus-editor/Chart.yaml index aecff3d46a..1479402f5c 100644 --- a/charts/statusgatekeepersh-constraintpodstatus-editor/Chart.yaml +++ b/charts/statusgatekeepersh-constraintpodstatus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"status.gatekeeper.sh","version":"v1beta1","resource":"constraintpodstatuses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ConstraintPodStatus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: statusgatekeepersh-constraintpodstatus-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/statusgatekeepersh-constraintpodstatus-editor/README.md b/charts/statusgatekeepersh-constraintpodstatus-editor/README.md index 6df6843f49..c6e4490cb5 100644 --- a/charts/statusgatekeepersh-constraintpodstatus-editor/README.md +++ b/charts/statusgatekeepersh-constraintpodstatus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/statusgatekeepersh-constraintpodstatus-editor --version=v0.23.0 -$ helm upgrade -i statusgatekeepersh-constraintpodstatus-editor appscode/statusgatekeepersh-constraintpodstatus-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/statusgatekeepersh-constraintpodstatus-editor --version=v0.24.0 +$ helm upgrade -i statusgatekeepersh-constraintpodstatus-editor appscode/statusgatekeepersh-constraintpodstatus-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ConstraintPodStatus Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `statusgatekeepersh-constraintpodstatus-editor`: ```bash -$ helm upgrade -i statusgatekeepersh-constraintpodstatus-editor appscode/statusgatekeepersh-constraintpodstatus-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i statusgatekeepersh-constraintpodstatus-editor appscode/statusgatekeepersh-constraintpodstatus-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ConstraintPodStatus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `statusgatekeepersh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i statusgatekeepersh-constraintpodstatus-editor appscode/statusgatekeepersh-constraintpodstatus-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=status.gatekeeper.sh/v1beta1 +$ helm upgrade -i statusgatekeepersh-constraintpodstatus-editor appscode/statusgatekeepersh-constraintpodstatus-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=status.gatekeeper.sh/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i statusgatekeepersh-constraintpodstatus-editor appscode/statusgatekeepersh-constraintpodstatus-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i statusgatekeepersh-constraintpodstatus-editor appscode/statusgatekeepersh-constraintpodstatus-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/statusgatekeepersh-constrainttemplatepodstatus-editor/Chart.yaml b/charts/statusgatekeepersh-constrainttemplatepodstatus-editor/Chart.yaml index 039aeff4b5..6fb1593840 100644 --- a/charts/statusgatekeepersh-constrainttemplatepodstatus-editor/Chart.yaml +++ b/charts/statusgatekeepersh-constrainttemplatepodstatus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"status.gatekeeper.sh","version":"v1beta1","resource":"constrainttemplatepodstatuses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ConstraintTemplatePodStatus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: statusgatekeepersh-constrainttemplatepodstatus-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/statusgatekeepersh-constrainttemplatepodstatus-editor/README.md b/charts/statusgatekeepersh-constrainttemplatepodstatus-editor/README.md index f9eccb2849..7ef6a5b8b9 100644 --- a/charts/statusgatekeepersh-constrainttemplatepodstatus-editor/README.md +++ b/charts/statusgatekeepersh-constrainttemplatepodstatus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/statusgatekeepersh-constrainttemplatepodstatus-editor --version=v0.23.0 -$ helm upgrade -i statusgatekeepersh-constrainttemplatepodstatus-editor appscode/statusgatekeepersh-constrainttemplatepodstatus-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/statusgatekeepersh-constrainttemplatepodstatus-editor --version=v0.24.0 +$ helm upgrade -i statusgatekeepersh-constrainttemplatepodstatus-editor appscode/statusgatekeepersh-constrainttemplatepodstatus-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ConstraintTemplatePodStatus Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `statusgatekeepersh-constrainttemplatepodstatus-editor`: ```bash -$ helm upgrade -i statusgatekeepersh-constrainttemplatepodstatus-editor appscode/statusgatekeepersh-constrainttemplatepodstatus-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i statusgatekeepersh-constrainttemplatepodstatus-editor appscode/statusgatekeepersh-constrainttemplatepodstatus-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ConstraintTemplatePodStatus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `statusgatekeepersh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i statusgatekeepersh-constrainttemplatepodstatus-editor appscode/statusgatekeepersh-constrainttemplatepodstatus-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=status.gatekeeper.sh/v1beta1 +$ helm upgrade -i statusgatekeepersh-constrainttemplatepodstatus-editor appscode/statusgatekeepersh-constrainttemplatepodstatus-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=status.gatekeeper.sh/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i statusgatekeepersh-constrainttemplatepodstatus-editor appscode/statusgatekeepersh-constrainttemplatepodstatus-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i statusgatekeepersh-constrainttemplatepodstatus-editor appscode/statusgatekeepersh-constrainttemplatepodstatus-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/statusgatekeepersh-expansiontemplatepodstatus-editor/Chart.yaml b/charts/statusgatekeepersh-expansiontemplatepodstatus-editor/Chart.yaml index 7f88d84eee..6b115455a5 100644 --- a/charts/statusgatekeepersh-expansiontemplatepodstatus-editor/Chart.yaml +++ b/charts/statusgatekeepersh-expansiontemplatepodstatus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"status.gatekeeper.sh","version":"v1beta1","resource":"expansiontemplatepodstatuses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ExpansionTemplatePodStatus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: statusgatekeepersh-expansiontemplatepodstatus-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/statusgatekeepersh-expansiontemplatepodstatus-editor/README.md b/charts/statusgatekeepersh-expansiontemplatepodstatus-editor/README.md index 3e7288fa25..e3f281d3d3 100644 --- a/charts/statusgatekeepersh-expansiontemplatepodstatus-editor/README.md +++ b/charts/statusgatekeepersh-expansiontemplatepodstatus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/statusgatekeepersh-expansiontemplatepodstatus-editor --version=v0.23.0 -$ helm upgrade -i statusgatekeepersh-expansiontemplatepodstatus-editor appscode/statusgatekeepersh-expansiontemplatepodstatus-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/statusgatekeepersh-expansiontemplatepodstatus-editor --version=v0.24.0 +$ helm upgrade -i statusgatekeepersh-expansiontemplatepodstatus-editor appscode/statusgatekeepersh-expansiontemplatepodstatus-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ExpansionTemplatePodStatus Editor on a [Kubernetes](http:// To install/upgrade the chart with the release name `statusgatekeepersh-expansiontemplatepodstatus-editor`: ```bash -$ helm upgrade -i statusgatekeepersh-expansiontemplatepodstatus-editor appscode/statusgatekeepersh-expansiontemplatepodstatus-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i statusgatekeepersh-expansiontemplatepodstatus-editor appscode/statusgatekeepersh-expansiontemplatepodstatus-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ExpansionTemplatePodStatus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `statusgatekeepersh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i statusgatekeepersh-expansiontemplatepodstatus-editor appscode/statusgatekeepersh-expansiontemplatepodstatus-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=status.gatekeeper.sh/v1beta1 +$ helm upgrade -i statusgatekeepersh-expansiontemplatepodstatus-editor appscode/statusgatekeepersh-expansiontemplatepodstatus-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=status.gatekeeper.sh/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i statusgatekeepersh-expansiontemplatepodstatus-editor appscode/statusgatekeepersh-expansiontemplatepodstatus-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i statusgatekeepersh-expansiontemplatepodstatus-editor appscode/statusgatekeepersh-expansiontemplatepodstatus-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/statusgatekeepersh-mutatorpodstatus-editor/Chart.yaml b/charts/statusgatekeepersh-mutatorpodstatus-editor/Chart.yaml index e7388ec01f..3576e86d0c 100644 --- a/charts/statusgatekeepersh-mutatorpodstatus-editor/Chart.yaml +++ b/charts/statusgatekeepersh-mutatorpodstatus-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"status.gatekeeper.sh","version":"v1beta1","resource":"mutatorpodstatuses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MutatorPodStatus Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: statusgatekeepersh-mutatorpodstatus-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/statusgatekeepersh-mutatorpodstatus-editor/README.md b/charts/statusgatekeepersh-mutatorpodstatus-editor/README.md index 2ccccae2c9..1b17532111 100644 --- a/charts/statusgatekeepersh-mutatorpodstatus-editor/README.md +++ b/charts/statusgatekeepersh-mutatorpodstatus-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/statusgatekeepersh-mutatorpodstatus-editor --version=v0.23.0 -$ helm upgrade -i statusgatekeepersh-mutatorpodstatus-editor appscode/statusgatekeepersh-mutatorpodstatus-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/statusgatekeepersh-mutatorpodstatus-editor --version=v0.24.0 +$ helm upgrade -i statusgatekeepersh-mutatorpodstatus-editor appscode/statusgatekeepersh-mutatorpodstatus-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MutatorPodStatus Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `statusgatekeepersh-mutatorpodstatus-editor`: ```bash -$ helm upgrade -i statusgatekeepersh-mutatorpodstatus-editor appscode/statusgatekeepersh-mutatorpodstatus-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i statusgatekeepersh-mutatorpodstatus-editor appscode/statusgatekeepersh-mutatorpodstatus-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MutatorPodStatus Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `statusgatekeepersh Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i statusgatekeepersh-mutatorpodstatus-editor appscode/statusgatekeepersh-mutatorpodstatus-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=status.gatekeeper.sh/v1beta1 +$ helm upgrade -i statusgatekeepersh-mutatorpodstatus-editor appscode/statusgatekeepersh-mutatorpodstatus-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=status.gatekeeper.sh/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i statusgatekeepersh-mutatorpodstatus-editor appscode/statusgatekeepersh-mutatorpodstatus-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i statusgatekeepersh-mutatorpodstatus-editor appscode/statusgatekeepersh-mutatorpodstatus-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/storageazurekubedbcom-account-editor/Chart.yaml b/charts/storageazurekubedbcom-account-editor/Chart.yaml index 87175ae7c0..741715a556 100644 --- a/charts/storageazurekubedbcom-account-editor/Chart.yaml +++ b/charts/storageazurekubedbcom-account-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.azure.kubedb.com","version":"v1alpha1","resource":"accounts"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Account Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storageazurekubedbcom-account-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/storageazurekubedbcom-account-editor/README.md b/charts/storageazurekubedbcom-account-editor/README.md index 18bedb6dcd..86ad665884 100644 --- a/charts/storageazurekubedbcom-account-editor/README.md +++ b/charts/storageazurekubedbcom-account-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storageazurekubedbcom-account-editor --version=v0.23.0 -$ helm upgrade -i storageazurekubedbcom-account-editor appscode/storageazurekubedbcom-account-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/storageazurekubedbcom-account-editor --version=v0.24.0 +$ helm upgrade -i storageazurekubedbcom-account-editor appscode/storageazurekubedbcom-account-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Account Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `storageazurekubedbcom-account-editor`: ```bash -$ helm upgrade -i storageazurekubedbcom-account-editor appscode/storageazurekubedbcom-account-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i storageazurekubedbcom-account-editor appscode/storageazurekubedbcom-account-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Account Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storageazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storageazurekubedbcom-account-editor appscode/storageazurekubedbcom-account-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=storage.azure.kubedb.com/v1alpha1 +$ helm upgrade -i storageazurekubedbcom-account-editor appscode/storageazurekubedbcom-account-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=storage.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storageazurekubedbcom-account-editor appscode/storageazurekubedbcom-account-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i storageazurekubedbcom-account-editor appscode/storageazurekubedbcom-account-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/storageazurekubedbcom-container-editor/Chart.yaml b/charts/storageazurekubedbcom-container-editor/Chart.yaml index 2999af9751..da0b42adbf 100644 --- a/charts/storageazurekubedbcom-container-editor/Chart.yaml +++ b/charts/storageazurekubedbcom-container-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.azure.kubedb.com","version":"v1alpha1","resource":"containers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Container Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storageazurekubedbcom-container-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/storageazurekubedbcom-container-editor/README.md b/charts/storageazurekubedbcom-container-editor/README.md index 577193fa10..7aeb9c536b 100644 --- a/charts/storageazurekubedbcom-container-editor/README.md +++ b/charts/storageazurekubedbcom-container-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storageazurekubedbcom-container-editor --version=v0.23.0 -$ helm upgrade -i storageazurekubedbcom-container-editor appscode/storageazurekubedbcom-container-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/storageazurekubedbcom-container-editor --version=v0.24.0 +$ helm upgrade -i storageazurekubedbcom-container-editor appscode/storageazurekubedbcom-container-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Container Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `storageazurekubedbcom-container-editor`: ```bash -$ helm upgrade -i storageazurekubedbcom-container-editor appscode/storageazurekubedbcom-container-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i storageazurekubedbcom-container-editor appscode/storageazurekubedbcom-container-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Container Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storageazurekubedb Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storageazurekubedbcom-container-editor appscode/storageazurekubedbcom-container-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=storage.azure.kubedb.com/v1alpha1 +$ helm upgrade -i storageazurekubedbcom-container-editor appscode/storageazurekubedbcom-container-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=storage.azure.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storageazurekubedbcom-container-editor appscode/storageazurekubedbcom-container-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i storageazurekubedbcom-container-editor appscode/storageazurekubedbcom-container-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/storagek8sio-csidriver-editor/Chart.yaml b/charts/storagek8sio-csidriver-editor/Chart.yaml index 17c3db2140..ca33c5d012 100644 --- a/charts/storagek8sio-csidriver-editor/Chart.yaml +++ b/charts/storagek8sio-csidriver-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.k8s.io","version":"v1","resource":"csidrivers"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: CSIDriver Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storagek8sio-csidriver-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/storagek8sio-csidriver-editor/README.md b/charts/storagek8sio-csidriver-editor/README.md index 17b4fdb85d..e4a9b34aec 100644 --- a/charts/storagek8sio-csidriver-editor/README.md +++ b/charts/storagek8sio-csidriver-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagek8sio-csidriver-editor --version=v0.23.0 -$ helm upgrade -i storagek8sio-csidriver-editor appscode/storagek8sio-csidriver-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/storagek8sio-csidriver-editor --version=v0.24.0 +$ helm upgrade -i storagek8sio-csidriver-editor appscode/storagek8sio-csidriver-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CSIDriver Editor on a [Kubernetes](http://kubernetes.io) cl To install/upgrade the chart with the release name `storagek8sio-csidriver-editor`: ```bash -$ helm upgrade -i storagek8sio-csidriver-editor appscode/storagek8sio-csidriver-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i storagek8sio-csidriver-editor appscode/storagek8sio-csidriver-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a CSIDriver Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storagek8sio-csidr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagek8sio-csidriver-editor appscode/storagek8sio-csidriver-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=storage.k8s.io/v1 +$ helm upgrade -i storagek8sio-csidriver-editor appscode/storagek8sio-csidriver-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=storage.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagek8sio-csidriver-editor appscode/storagek8sio-csidriver-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i storagek8sio-csidriver-editor appscode/storagek8sio-csidriver-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/storagek8sio-csinode-editor/Chart.yaml b/charts/storagek8sio-csinode-editor/Chart.yaml index e877a335b0..3cfb7c4fba 100644 --- a/charts/storagek8sio-csinode-editor/Chart.yaml +++ b/charts/storagek8sio-csinode-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.k8s.io","version":"v1","resource":"csinodes"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: CSINode Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storagek8sio-csinode-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/storagek8sio-csinode-editor/README.md b/charts/storagek8sio-csinode-editor/README.md index 12f15b3420..4e38169426 100644 --- a/charts/storagek8sio-csinode-editor/README.md +++ b/charts/storagek8sio-csinode-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagek8sio-csinode-editor --version=v0.23.0 -$ helm upgrade -i storagek8sio-csinode-editor appscode/storagek8sio-csinode-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/storagek8sio-csinode-editor --version=v0.24.0 +$ helm upgrade -i storagek8sio-csinode-editor appscode/storagek8sio-csinode-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CSINode Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `storagek8sio-csinode-editor`: ```bash -$ helm upgrade -i storagek8sio-csinode-editor appscode/storagek8sio-csinode-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i storagek8sio-csinode-editor appscode/storagek8sio-csinode-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a CSINode Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storagek8sio-csino Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagek8sio-csinode-editor appscode/storagek8sio-csinode-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=storage.k8s.io/v1 +$ helm upgrade -i storagek8sio-csinode-editor appscode/storagek8sio-csinode-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=storage.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagek8sio-csinode-editor appscode/storagek8sio-csinode-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i storagek8sio-csinode-editor appscode/storagek8sio-csinode-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/storagek8sio-csistoragecapacity-editor/Chart.yaml b/charts/storagek8sio-csistoragecapacity-editor/Chart.yaml index 788f584b7f..23dfbd8cbb 100644 --- a/charts/storagek8sio-csistoragecapacity-editor/Chart.yaml +++ b/charts/storagek8sio-csistoragecapacity-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.k8s.io","version":"v1beta1","resource":"csistoragecapacities"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: CSIStorageCapacity Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storagek8sio-csistoragecapacity-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/storagek8sio-csistoragecapacity-editor/README.md b/charts/storagek8sio-csistoragecapacity-editor/README.md index 1c9e868824..6f44aefa27 100644 --- a/charts/storagek8sio-csistoragecapacity-editor/README.md +++ b/charts/storagek8sio-csistoragecapacity-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagek8sio-csistoragecapacity-editor --version=v0.23.0 -$ helm upgrade -i storagek8sio-csistoragecapacity-editor appscode/storagek8sio-csistoragecapacity-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/storagek8sio-csistoragecapacity-editor --version=v0.24.0 +$ helm upgrade -i storagek8sio-csistoragecapacity-editor appscode/storagek8sio-csistoragecapacity-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a CSIStorageCapacity Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `storagek8sio-csistoragecapacity-editor`: ```bash -$ helm upgrade -i storagek8sio-csistoragecapacity-editor appscode/storagek8sio-csistoragecapacity-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i storagek8sio-csistoragecapacity-editor appscode/storagek8sio-csistoragecapacity-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a CSIStorageCapacity Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storagek8sio-csist Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagek8sio-csistoragecapacity-editor appscode/storagek8sio-csistoragecapacity-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=storage.k8s.io/v1beta1 +$ helm upgrade -i storagek8sio-csistoragecapacity-editor appscode/storagek8sio-csistoragecapacity-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=storage.k8s.io/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagek8sio-csistoragecapacity-editor appscode/storagek8sio-csistoragecapacity-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i storagek8sio-csistoragecapacity-editor appscode/storagek8sio-csistoragecapacity-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/storagek8sio-storageclass-editor/Chart.yaml b/charts/storagek8sio-storageclass-editor/Chart.yaml index c0c2a31f82..fb0e83c366 100644 --- a/charts/storagek8sio-storageclass-editor/Chart.yaml +++ b/charts/storagek8sio-storageclass-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.k8s.io","version":"v1","resource":"storageclasses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: StorageClass Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storagek8sio-storageclass-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/storagek8sio-storageclass-editor/README.md b/charts/storagek8sio-storageclass-editor/README.md index 218290392a..d5af8690be 100644 --- a/charts/storagek8sio-storageclass-editor/README.md +++ b/charts/storagek8sio-storageclass-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagek8sio-storageclass-editor --version=v0.23.0 -$ helm upgrade -i storagek8sio-storageclass-editor appscode/storagek8sio-storageclass-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/storagek8sio-storageclass-editor --version=v0.24.0 +$ helm upgrade -i storagek8sio-storageclass-editor appscode/storagek8sio-storageclass-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a StorageClass Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `storagek8sio-storageclass-editor`: ```bash -$ helm upgrade -i storagek8sio-storageclass-editor appscode/storagek8sio-storageclass-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i storagek8sio-storageclass-editor appscode/storagek8sio-storageclass-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a StorageClass Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storagek8sio-stora Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagek8sio-storageclass-editor appscode/storagek8sio-storageclass-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=storage.k8s.io/v1 +$ helm upgrade -i storagek8sio-storageclass-editor appscode/storagek8sio-storageclass-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=storage.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagek8sio-storageclass-editor appscode/storagek8sio-storageclass-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i storagek8sio-storageclass-editor appscode/storagek8sio-storageclass-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/storagek8sio-volumeattachment-editor/Chart.yaml b/charts/storagek8sio-volumeattachment-editor/Chart.yaml index 1778c08c1a..3e1ae82845 100644 --- a/charts/storagek8sio-volumeattachment-editor/Chart.yaml +++ b/charts/storagek8sio-volumeattachment-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.k8s.io","version":"v1","resource":"volumeattachments"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: VolumeAttachment Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storagek8sio-volumeattachment-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/storagek8sio-volumeattachment-editor/README.md b/charts/storagek8sio-volumeattachment-editor/README.md index 3c5aff9aa4..4e3f1c351f 100644 --- a/charts/storagek8sio-volumeattachment-editor/README.md +++ b/charts/storagek8sio-volumeattachment-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagek8sio-volumeattachment-editor --version=v0.23.0 -$ helm upgrade -i storagek8sio-volumeattachment-editor appscode/storagek8sio-volumeattachment-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/storagek8sio-volumeattachment-editor --version=v0.24.0 +$ helm upgrade -i storagek8sio-volumeattachment-editor appscode/storagek8sio-volumeattachment-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a VolumeAttachment Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `storagek8sio-volumeattachment-editor`: ```bash -$ helm upgrade -i storagek8sio-volumeattachment-editor appscode/storagek8sio-volumeattachment-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i storagek8sio-volumeattachment-editor appscode/storagek8sio-volumeattachment-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a VolumeAttachment Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storagek8sio-volum Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagek8sio-volumeattachment-editor appscode/storagek8sio-volumeattachment-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=storage.k8s.io/v1 +$ helm upgrade -i storagek8sio-volumeattachment-editor appscode/storagek8sio-volumeattachment-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=storage.k8s.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagek8sio-volumeattachment-editor appscode/storagek8sio-volumeattachment-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i storagek8sio-volumeattachment-editor appscode/storagek8sio-volumeattachment-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/storagekubestashcom-backupstorage-editor-options/Chart.yaml b/charts/storagekubestashcom-backupstorage-editor-options/Chart.yaml index 0840fc83c2..4efdf00579 100644 --- a/charts/storagekubestashcom-backupstorage-editor-options/Chart.yaml +++ b/charts/storagekubestashcom-backupstorage-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: storagekubestashcom-backupstorage-editor-options description: Stash Repository Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/storagekubestashcom-backupstorage-editor-options/README.md b/charts/storagekubestashcom-backupstorage-editor-options/README.md index 50076a1349..e1b72198a9 100644 --- a/charts/storagekubestashcom-backupstorage-editor-options/README.md +++ b/charts/storagekubestashcom-backupstorage-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagekubestashcom-backupstorage-editor-options --version=v0.23.0 -$ helm upgrade -i storagekubestashcom-backupstorage-editor-options appscode/storagekubestashcom-backupstorage-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/storagekubestashcom-backupstorage-editor-options --version=v0.24.0 +$ helm upgrade -i storagekubestashcom-backupstorage-editor-options appscode/storagekubestashcom-backupstorage-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Stash Repository Editor UI Options on a [Kubernetes](http:/ To install/upgrade the chart with the release name `storagekubestashcom-backupstorage-editor-options`: ```bash -$ helm upgrade -i storagekubestashcom-backupstorage-editor-options appscode/storagekubestashcom-backupstorage-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i storagekubestashcom-backupstorage-editor-options appscode/storagekubestashcom-backupstorage-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Stash Repository Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -76,12 +76,12 @@ The following table lists the configurable parameters of the `storagekubestashco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagekubestashcom-backupstorage-editor-options appscode/storagekubestashcom-backupstorage-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=storage.kubestash.com +$ helm upgrade -i storagekubestashcom-backupstorage-editor-options appscode/storagekubestashcom-backupstorage-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=storage.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagekubestashcom-backupstorage-editor-options appscode/storagekubestashcom-backupstorage-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i storagekubestashcom-backupstorage-editor-options appscode/storagekubestashcom-backupstorage-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/storagekubestashcom-backupstorage-editor/Chart.yaml b/charts/storagekubestashcom-backupstorage-editor/Chart.yaml index 81f61be8c4..d46035faa0 100644 --- a/charts/storagekubestashcom-backupstorage-editor/Chart.yaml +++ b/charts/storagekubestashcom-backupstorage-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: \"\"\n kind: Secret\n version: v1\n- group:\ \ storage.kubestash.com\n kind: BackupStorage\n version: v1alpha1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: BackupStorage Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: storagekubestashcom-backupstorage-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/storagekubestashcom-backupstorage-editor/README.md b/charts/storagekubestashcom-backupstorage-editor/README.md index 56a13e8c05..f3a63e9774 100644 --- a/charts/storagekubestashcom-backupstorage-editor/README.md +++ b/charts/storagekubestashcom-backupstorage-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagekubestashcom-backupstorage-editor --version=v0.23.0 -$ helm upgrade -i storagekubestashcom-backupstorage-editor appscode/storagekubestashcom-backupstorage-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/storagekubestashcom-backupstorage-editor --version=v0.24.0 +$ helm upgrade -i storagekubestashcom-backupstorage-editor appscode/storagekubestashcom-backupstorage-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupStorage Editor on a [Kubernetes](http://kubernetes.io To install/upgrade the chart with the release name `storagekubestashcom-backupstorage-editor`: ```bash -$ helm upgrade -i storagekubestashcom-backupstorage-editor appscode/storagekubestashcom-backupstorage-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i storagekubestashcom-backupstorage-editor appscode/storagekubestashcom-backupstorage-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a BackupStorage Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -61,12 +61,12 @@ The following table lists the configurable parameters of the `storagekubestashco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagekubestashcom-backupstorage-editor appscode/storagekubestashcom-backupstorage-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=storage.kubestash.com +$ helm upgrade -i storagekubestashcom-backupstorage-editor appscode/storagekubestashcom-backupstorage-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=storage.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagekubestashcom-backupstorage-editor appscode/storagekubestashcom-backupstorage-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i storagekubestashcom-backupstorage-editor appscode/storagekubestashcom-backupstorage-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/storagekubestashcom-repository-editor-options/Chart.yaml b/charts/storagekubestashcom-repository-editor-options/Chart.yaml index 47cfd5e875..dde99c6972 100644 --- a/charts/storagekubestashcom-repository-editor-options/Chart.yaml +++ b/charts/storagekubestashcom-repository-editor-options/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: storagekubestashcom-repository-editor-options description: Stash Repository Editor UI Options type: application -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/storagekubestashcom-repository-editor-options/README.md b/charts/storagekubestashcom-repository-editor-options/README.md index 2dfe534b05..46d7a1cbec 100644 --- a/charts/storagekubestashcom-repository-editor-options/README.md +++ b/charts/storagekubestashcom-repository-editor-options/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagekubestashcom-repository-editor-options --version=v0.23.0 -$ helm upgrade -i storagekubestashcom-repository-editor-options appscode/storagekubestashcom-repository-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm search repo appscode/storagekubestashcom-repository-editor-options --version=v0.24.0 +$ helm upgrade -i storagekubestashcom-repository-editor-options appscode/storagekubestashcom-repository-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Stash Repository Editor UI Options on a [Kubernetes](http:/ To install/upgrade the chart with the release name `storagekubestashcom-repository-editor-options`: ```bash -$ helm upgrade -i storagekubestashcom-repository-editor-options appscode/storagekubestashcom-repository-editor-options -n kube-system --create-namespace --version=v0.23.0 +$ helm upgrade -i storagekubestashcom-repository-editor-options appscode/storagekubestashcom-repository-editor-options -n kube-system --create-namespace --version=v0.24.0 ``` The command deploys a Stash Repository Editor UI Options on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -71,12 +71,12 @@ The following table lists the configurable parameters of the `storagekubestashco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagekubestashcom-repository-editor-options appscode/storagekubestashcom-repository-editor-options -n kube-system --create-namespace --version=v0.23.0 --set metadata.resource.group=storage.kubestash.com +$ helm upgrade -i storagekubestashcom-repository-editor-options appscode/storagekubestashcom-repository-editor-options -n kube-system --create-namespace --version=v0.24.0 --set metadata.resource.group=storage.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagekubestashcom-repository-editor-options appscode/storagekubestashcom-repository-editor-options -n kube-system --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i storagekubestashcom-repository-editor-options appscode/storagekubestashcom-repository-editor-options -n kube-system --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/storagekubestashcom-repository-editor/Chart.yaml b/charts/storagekubestashcom-repository-editor/Chart.yaml index 7c945625ce..1571a59070 100644 --- a/charts/storagekubestashcom-repository-editor/Chart.yaml +++ b/charts/storagekubestashcom-repository-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: storage.kubestash.com\n kind: Repository\n\ \ version: v1alpha1\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Repository Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: storagekubestashcom-repository-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/storagekubestashcom-repository-editor/README.md b/charts/storagekubestashcom-repository-editor/README.md index 4aaa8b1a4c..3bfb52e989 100644 --- a/charts/storagekubestashcom-repository-editor/README.md +++ b/charts/storagekubestashcom-repository-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagekubestashcom-repository-editor --version=v0.23.0 -$ helm upgrade -i storagekubestashcom-repository-editor appscode/storagekubestashcom-repository-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/storagekubestashcom-repository-editor --version=v0.24.0 +$ helm upgrade -i storagekubestashcom-repository-editor appscode/storagekubestashcom-repository-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Repository Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `storagekubestashcom-repository-editor`: ```bash -$ helm upgrade -i storagekubestashcom-repository-editor appscode/storagekubestashcom-repository-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i storagekubestashcom-repository-editor appscode/storagekubestashcom-repository-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Repository Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -60,12 +60,12 @@ The following table lists the configurable parameters of the `storagekubestashco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagekubestashcom-repository-editor appscode/storagekubestashcom-repository-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=storage.kubestash.com +$ helm upgrade -i storagekubestashcom-repository-editor appscode/storagekubestashcom-repository-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=storage.kubestash.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagekubestashcom-repository-editor appscode/storagekubestashcom-repository-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i storagekubestashcom-repository-editor appscode/storagekubestashcom-repository-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/storagekubestashcom-retentionpolicy-editor/Chart.yaml b/charts/storagekubestashcom-retentionpolicy-editor/Chart.yaml index 1489d8185f..362f77bb5e 100644 --- a/charts/storagekubestashcom-retentionpolicy-editor/Chart.yaml +++ b/charts/storagekubestashcom-retentionpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.kubestash.com","version":"v1alpha1","resource":"retentionpolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RetentionPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storagekubestashcom-retentionpolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/storagekubestashcom-retentionpolicy-editor/README.md b/charts/storagekubestashcom-retentionpolicy-editor/README.md index 7bfaea74d3..cfe28e0c66 100644 --- a/charts/storagekubestashcom-retentionpolicy-editor/README.md +++ b/charts/storagekubestashcom-retentionpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagekubestashcom-retentionpolicy-editor --version=v0.23.0 -$ helm upgrade -i storagekubestashcom-retentionpolicy-editor appscode/storagekubestashcom-retentionpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/storagekubestashcom-retentionpolicy-editor --version=v0.24.0 +$ helm upgrade -i storagekubestashcom-retentionpolicy-editor appscode/storagekubestashcom-retentionpolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RetentionPolicy Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `storagekubestashcom-retentionpolicy-editor`: ```bash -$ helm upgrade -i storagekubestashcom-retentionpolicy-editor appscode/storagekubestashcom-retentionpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i storagekubestashcom-retentionpolicy-editor appscode/storagekubestashcom-retentionpolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RetentionPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storagekubestashco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagekubestashcom-retentionpolicy-editor appscode/storagekubestashcom-retentionpolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=storage.kubestash.com/v1alpha1 +$ helm upgrade -i storagekubestashcom-retentionpolicy-editor appscode/storagekubestashcom-retentionpolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=storage.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagekubestashcom-retentionpolicy-editor appscode/storagekubestashcom-retentionpolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i storagekubestashcom-retentionpolicy-editor appscode/storagekubestashcom-retentionpolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/storagekubestashcom-snapshot-editor/Chart.yaml b/charts/storagekubestashcom-snapshot-editor/Chart.yaml index f31d981075..a6f44557fc 100644 --- a/charts/storagekubestashcom-snapshot-editor/Chart.yaml +++ b/charts/storagekubestashcom-snapshot-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"storage.kubestash.com","version":"v1alpha1","resource":"snapshots"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Snapshot Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: storagekubestashcom-snapshot-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/storagekubestashcom-snapshot-editor/README.md b/charts/storagekubestashcom-snapshot-editor/README.md index 12f51c4a81..fad810b8e9 100644 --- a/charts/storagekubestashcom-snapshot-editor/README.md +++ b/charts/storagekubestashcom-snapshot-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/storagekubestashcom-snapshot-editor --version=v0.23.0 -$ helm upgrade -i storagekubestashcom-snapshot-editor appscode/storagekubestashcom-snapshot-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/storagekubestashcom-snapshot-editor --version=v0.24.0 +$ helm upgrade -i storagekubestashcom-snapshot-editor appscode/storagekubestashcom-snapshot-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Snapshot Editor on a [Kubernetes](http://kubernetes.io) clu To install/upgrade the chart with the release name `storagekubestashcom-snapshot-editor`: ```bash -$ helm upgrade -i storagekubestashcom-snapshot-editor appscode/storagekubestashcom-snapshot-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i storagekubestashcom-snapshot-editor appscode/storagekubestashcom-snapshot-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Snapshot Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `storagekubestashco Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i storagekubestashcom-snapshot-editor appscode/storagekubestashcom-snapshot-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=storage.kubestash.com/v1alpha1 +$ helm upgrade -i storagekubestashcom-snapshot-editor appscode/storagekubestashcom-snapshot-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=storage.kubestash.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i storagekubestashcom-snapshot-editor appscode/storagekubestashcom-snapshot-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i storagekubestashcom-snapshot-editor appscode/storagekubestashcom-snapshot-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/supervisorappscodecom-approvalpolicy-editor/Chart.yaml b/charts/supervisorappscodecom-approvalpolicy-editor/Chart.yaml index f1bc70c3f8..3d2d201d3a 100644 --- a/charts/supervisorappscodecom-approvalpolicy-editor/Chart.yaml +++ b/charts/supervisorappscodecom-approvalpolicy-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"supervisor.appscode.com","version":"v1alpha1","resource":"approvalpolicies"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ApprovalPolicy Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: supervisorappscodecom-approvalpolicy-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/supervisorappscodecom-approvalpolicy-editor/README.md b/charts/supervisorappscodecom-approvalpolicy-editor/README.md index 1ed93388e0..58692b2e8c 100644 --- a/charts/supervisorappscodecom-approvalpolicy-editor/README.md +++ b/charts/supervisorappscodecom-approvalpolicy-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/supervisorappscodecom-approvalpolicy-editor --version=v0.23.0 -$ helm upgrade -i supervisorappscodecom-approvalpolicy-editor appscode/supervisorappscodecom-approvalpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/supervisorappscodecom-approvalpolicy-editor --version=v0.24.0 +$ helm upgrade -i supervisorappscodecom-approvalpolicy-editor appscode/supervisorappscodecom-approvalpolicy-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ApprovalPolicy Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `supervisorappscodecom-approvalpolicy-editor`: ```bash -$ helm upgrade -i supervisorappscodecom-approvalpolicy-editor appscode/supervisorappscodecom-approvalpolicy-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i supervisorappscodecom-approvalpolicy-editor appscode/supervisorappscodecom-approvalpolicy-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ApprovalPolicy Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `supervisorappscode Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i supervisorappscodecom-approvalpolicy-editor appscode/supervisorappscodecom-approvalpolicy-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=supervisor.appscode.com/v1alpha1 +$ helm upgrade -i supervisorappscodecom-approvalpolicy-editor appscode/supervisorappscodecom-approvalpolicy-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=supervisor.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i supervisorappscodecom-approvalpolicy-editor appscode/supervisorappscodecom-approvalpolicy-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i supervisorappscodecom-approvalpolicy-editor appscode/supervisorappscodecom-approvalpolicy-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/supervisorappscodecom-clustermaintenancewindow-editor/Chart.yaml b/charts/supervisorappscodecom-clustermaintenancewindow-editor/Chart.yaml index cd32619955..145b0454a1 100644 --- a/charts/supervisorappscodecom-clustermaintenancewindow-editor/Chart.yaml +++ b/charts/supervisorappscodecom-clustermaintenancewindow-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"supervisor.appscode.com","version":"v1alpha1","resource":"clustermaintenancewindows"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterMaintenanceWindow Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: supervisorappscodecom-clustermaintenancewindow-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/supervisorappscodecom-clustermaintenancewindow-editor/README.md b/charts/supervisorappscodecom-clustermaintenancewindow-editor/README.md index 936b917c6e..5ca397dc37 100644 --- a/charts/supervisorappscodecom-clustermaintenancewindow-editor/README.md +++ b/charts/supervisorappscodecom-clustermaintenancewindow-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/supervisorappscodecom-clustermaintenancewindow-editor --version=v0.23.0 -$ helm upgrade -i supervisorappscodecom-clustermaintenancewindow-editor appscode/supervisorappscodecom-clustermaintenancewindow-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/supervisorappscodecom-clustermaintenancewindow-editor --version=v0.24.0 +$ helm upgrade -i supervisorappscodecom-clustermaintenancewindow-editor appscode/supervisorappscodecom-clustermaintenancewindow-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterMaintenanceWindow Editor on a [Kubernetes](http://ku To install/upgrade the chart with the release name `supervisorappscodecom-clustermaintenancewindow-editor`: ```bash -$ helm upgrade -i supervisorappscodecom-clustermaintenancewindow-editor appscode/supervisorappscodecom-clustermaintenancewindow-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i supervisorappscodecom-clustermaintenancewindow-editor appscode/supervisorappscodecom-clustermaintenancewindow-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterMaintenanceWindow Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `supervisorappscode Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i supervisorappscodecom-clustermaintenancewindow-editor appscode/supervisorappscodecom-clustermaintenancewindow-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=supervisor.appscode.com/v1alpha1 +$ helm upgrade -i supervisorappscodecom-clustermaintenancewindow-editor appscode/supervisorappscodecom-clustermaintenancewindow-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=supervisor.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i supervisorappscodecom-clustermaintenancewindow-editor appscode/supervisorappscodecom-clustermaintenancewindow-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i supervisorappscodecom-clustermaintenancewindow-editor appscode/supervisorappscodecom-clustermaintenancewindow-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/supervisorappscodecom-maintenancewindow-editor/Chart.yaml b/charts/supervisorappscodecom-maintenancewindow-editor/Chart.yaml index 94a7943fdb..bdcee8e21d 100644 --- a/charts/supervisorappscodecom-maintenancewindow-editor/Chart.yaml +++ b/charts/supervisorappscodecom-maintenancewindow-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"supervisor.appscode.com","version":"v1alpha1","resource":"maintenancewindows"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MaintenanceWindow Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: supervisorappscodecom-maintenancewindow-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/supervisorappscodecom-maintenancewindow-editor/README.md b/charts/supervisorappscodecom-maintenancewindow-editor/README.md index cd3aabcfba..1d8c678844 100644 --- a/charts/supervisorappscodecom-maintenancewindow-editor/README.md +++ b/charts/supervisorappscodecom-maintenancewindow-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/supervisorappscodecom-maintenancewindow-editor --version=v0.23.0 -$ helm upgrade -i supervisorappscodecom-maintenancewindow-editor appscode/supervisorappscodecom-maintenancewindow-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/supervisorappscodecom-maintenancewindow-editor --version=v0.24.0 +$ helm upgrade -i supervisorappscodecom-maintenancewindow-editor appscode/supervisorappscodecom-maintenancewindow-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MaintenanceWindow Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `supervisorappscodecom-maintenancewindow-editor`: ```bash -$ helm upgrade -i supervisorappscodecom-maintenancewindow-editor appscode/supervisorappscodecom-maintenancewindow-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i supervisorappscodecom-maintenancewindow-editor appscode/supervisorappscodecom-maintenancewindow-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MaintenanceWindow Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `supervisorappscode Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i supervisorappscodecom-maintenancewindow-editor appscode/supervisorappscodecom-maintenancewindow-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=supervisor.appscode.com/v1alpha1 +$ helm upgrade -i supervisorappscodecom-maintenancewindow-editor appscode/supervisorappscodecom-maintenancewindow-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=supervisor.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i supervisorappscodecom-maintenancewindow-editor appscode/supervisorappscodecom-maintenancewindow-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i supervisorappscodecom-maintenancewindow-editor appscode/supervisorappscodecom-maintenancewindow-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/supervisorappscodecom-recommendation-editor/Chart.yaml b/charts/supervisorappscodecom-recommendation-editor/Chart.yaml index 8fd6e7d169..ee9bc91a2b 100644 --- a/charts/supervisorappscodecom-recommendation-editor/Chart.yaml +++ b/charts/supervisorappscodecom-recommendation-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"supervisor.appscode.com","version":"v1alpha1","resource":"recommendations"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Recommendation Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: supervisorappscodecom-recommendation-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/supervisorappscodecom-recommendation-editor/README.md b/charts/supervisorappscodecom-recommendation-editor/README.md index b5f56caaf9..510dfc04a0 100644 --- a/charts/supervisorappscodecom-recommendation-editor/README.md +++ b/charts/supervisorappscodecom-recommendation-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/supervisorappscodecom-recommendation-editor --version=v0.23.0 -$ helm upgrade -i supervisorappscodecom-recommendation-editor appscode/supervisorappscodecom-recommendation-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/supervisorappscodecom-recommendation-editor --version=v0.24.0 +$ helm upgrade -i supervisorappscodecom-recommendation-editor appscode/supervisorappscodecom-recommendation-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Recommendation Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `supervisorappscodecom-recommendation-editor`: ```bash -$ helm upgrade -i supervisorappscodecom-recommendation-editor appscode/supervisorappscodecom-recommendation-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i supervisorappscodecom-recommendation-editor appscode/supervisorappscodecom-recommendation-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Recommendation Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `supervisorappscode Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i supervisorappscodecom-recommendation-editor appscode/supervisorappscodecom-recommendation-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=supervisor.appscode.com/v1alpha1 +$ helm upgrade -i supervisorappscodecom-recommendation-editor appscode/supervisorappscodecom-recommendation-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=supervisor.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i supervisorappscodecom-recommendation-editor appscode/supervisorappscodecom-recommendation-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i supervisorappscodecom-recommendation-editor appscode/supervisorappscodecom-recommendation-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uibytebuildersdev-component-alert/Chart.yaml b/charts/uibytebuildersdev-component-alert/Chart.yaml index f91388401f..bfa8da6130 100644 --- a/charts/uibytebuildersdev-component-alert/Chart.yaml +++ b/charts/uibytebuildersdev-component-alert/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-alert description: Alert Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-backup-option/Chart.yaml b/charts/uibytebuildersdev-component-backup-option/Chart.yaml index 29b47dba76..824821f4b6 100644 --- a/charts/uibytebuildersdev-component-backup-option/Chart.yaml +++ b/charts/uibytebuildersdev-component-backup-option/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-backup-option description: Backup Option Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-backupconfiguration/Chart.yaml b/charts/uibytebuildersdev-component-backupconfiguration/Chart.yaml index c6e1eba974..456e39f03e 100644 --- a/charts/uibytebuildersdev-component-backupconfiguration/Chart.yaml +++ b/charts/uibytebuildersdev-component-backupconfiguration/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-backupconfiguration description: BackupConfiguration Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-backupconfiguration/ui/create-ui.yaml b/charts/uibytebuildersdev-component-backupconfiguration/ui/create-ui.yaml index 1017f44060..f92e2c49e2 100644 --- a/charts/uibytebuildersdev-component-backupconfiguration/ui/create-ui.yaml +++ b/charts/uibytebuildersdev-component-backupconfiguration/ui/create-ui.yaml @@ -129,7 +129,7 @@ elements: - alias: runtime_settings_backup chart: name: uibytebuildersdev-component-database-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: data#/properties/namespace diff --git a/charts/uibytebuildersdev-component-certificates/Chart.yaml b/charts/uibytebuildersdev-component-certificates/Chart.yaml index ddb1047f41..a823fe4f69 100644 --- a/charts/uibytebuildersdev-component-certificates/Chart.yaml +++ b/charts/uibytebuildersdev-component-certificates/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-certificates description: Certificates Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-data-sources-items/Chart.yaml b/charts/uibytebuildersdev-component-data-sources-items/Chart.yaml index 61185068e1..cd9d94622b 100644 --- a/charts/uibytebuildersdev-component-data-sources-items/Chart.yaml +++ b/charts/uibytebuildersdev-component-data-sources-items/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-data-sources-items description: Data Source Items Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-database-runtime-settings/Chart.yaml b/charts/uibytebuildersdev-component-database-runtime-settings/Chart.yaml index d49b14a29a..408294af7b 100644 --- a/charts/uibytebuildersdev-component-database-runtime-settings/Chart.yaml +++ b/charts/uibytebuildersdev-component-database-runtime-settings/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-database-runtime-settings description: DatabaseRuntimeSettings Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-database-runtime-settings/ui/create-ui.yaml b/charts/uibytebuildersdev-component-database-runtime-settings/ui/create-ui.yaml index 355c874c4f..a34d51a606 100644 --- a/charts/uibytebuildersdev-component-database-runtime-settings/ui/create-ui.yaml +++ b/charts/uibytebuildersdev-component-database-runtime-settings/ui/create-ui.yaml @@ -87,7 +87,7 @@ elements: - alias: reusable_node_selector_terms_match_expressions chart: name: uibytebuildersdev-component-match-expressions - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/pod/properties/affinity/properties/nodeAffinity/properties/requiredDuringSchedulingIgnoredDuringExecution/properties/nodeSelectorTerms/items/properties/matchExpressions @@ -95,7 +95,7 @@ elements: - alias: reusable_node_selector_terms_match_fields chart: name: uibytebuildersdev-component-match-fields - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/pod/properties/affinity/properties/nodeAffinity/properties/requiredDuringSchedulingIgnoredDuringExecution/properties/nodeSelectorTerms/items/properties/matchFields @@ -168,7 +168,7 @@ elements: - alias: reusable_preferred_match_expressions chart: name: uibytebuildersdev-component-match-expressions - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/pod/properties/affinity/properties/nodeAffinity/properties/preferredDuringSchedulingIgnoredDuringExecution/items/properties/preference/properties/matchExpressions @@ -176,7 +176,7 @@ elements: - alias: reusable_preferred_match_fields chart: name: uibytebuildersdev-component-match-fields - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/pod/properties/affinity/properties/nodeAffinity/properties/preferredDuringSchedulingIgnoredDuringExecution/items/properties/preference/properties/matchFields diff --git a/charts/uibytebuildersdev-component-env-from/Chart.yaml b/charts/uibytebuildersdev-component-env-from/Chart.yaml index 8a6d8db2ed..b34e407d70 100644 --- a/charts/uibytebuildersdev-component-env-from/Chart.yaml +++ b/charts/uibytebuildersdev-component-env-from/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-env-from description: EnvFrom Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-env/Chart.yaml b/charts/uibytebuildersdev-component-env/Chart.yaml index ec6d4fad26..0cc72b2455 100644 --- a/charts/uibytebuildersdev-component-env/Chart.yaml +++ b/charts/uibytebuildersdev-component-env/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-env description: Env Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-health-checker/Chart.yaml b/charts/uibytebuildersdev-component-health-checker/Chart.yaml index a52552c730..db2627ab57 100644 --- a/charts/uibytebuildersdev-component-health-checker/Chart.yaml +++ b/charts/uibytebuildersdev-component-health-checker/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-health-checker description: Health Checker Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-initialization/Chart.yaml b/charts/uibytebuildersdev-component-initialization/Chart.yaml index 6d68b8beb4..9b5ed9c4ce 100644 --- a/charts/uibytebuildersdev-component-initialization/Chart.yaml +++ b/charts/uibytebuildersdev-component-initialization/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-initialization description: Initialization Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-initialization/ui/create-ui.yaml b/charts/uibytebuildersdev-component-initialization/ui/create-ui.yaml index 0cc801d570..382f875ee9 100644 --- a/charts/uibytebuildersdev-component-initialization/ui/create-ui.yaml +++ b/charts/uibytebuildersdev-component-initialization/ui/create-ui.yaml @@ -88,7 +88,7 @@ elements: - alias: runtime_settings_init chart: name: uibytebuildersdev-component-database-runtime-settings - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: data#/properties/namespace diff --git a/charts/uibytebuildersdev-component-jwtoidc-config/Chart.yaml b/charts/uibytebuildersdev-component-jwtoidc-config/Chart.yaml index 38ccd12d3e..6e167d7da3 100644 --- a/charts/uibytebuildersdev-component-jwtoidc-config/Chart.yaml +++ b/charts/uibytebuildersdev-component-jwtoidc-config/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-jwtoidc-config description: JwtOidc Config Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-kubedb-ui-presets/Chart.yaml b/charts/uibytebuildersdev-component-kubedb-ui-presets/Chart.yaml index f37c6ae667..59cff3d987 100644 --- a/charts/uibytebuildersdev-component-kubedb-ui-presets/Chart.yaml +++ b/charts/uibytebuildersdev-component-kubedb-ui-presets/Chart.yaml @@ -2,8 +2,8 @@ apiVersion: v2 name: uibytebuildersdev-component-kubedb-ui-presets description: kubedb-ui preset reusable preset chart type: library -version: v0.23.0 -appVersion: v0.23.0 +version: v0.24.0 +appVersion: v0.24.0 maintainers: - name: appscode email: support@appscode.com diff --git a/charts/uibytebuildersdev-component-match-expressions/Chart.yaml b/charts/uibytebuildersdev-component-match-expressions/Chart.yaml index 6f66deea46..558d138c12 100644 --- a/charts/uibytebuildersdev-component-match-expressions/Chart.yaml +++ b/charts/uibytebuildersdev-component-match-expressions/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-match-expressions description: MatchExpressions Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-match-fields/Chart.yaml b/charts/uibytebuildersdev-component-match-fields/Chart.yaml index 48831b65f3..6c8729a1c7 100644 --- a/charts/uibytebuildersdev-component-match-fields/Chart.yaml +++ b/charts/uibytebuildersdev-component-match-fields/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-match-fields description: MatchFields Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-monitoring-option/Chart.yaml b/charts/uibytebuildersdev-component-monitoring-option/Chart.yaml index 2d71e6eb91..5297310d40 100644 --- a/charts/uibytebuildersdev-component-monitoring-option/Chart.yaml +++ b/charts/uibytebuildersdev-component-monitoring-option/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-monitoring-option description: Monitoring Option Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-pod-template/Chart.yaml b/charts/uibytebuildersdev-component-pod-template/Chart.yaml index 3329ce4748..339201203b 100644 --- a/charts/uibytebuildersdev-component-pod-template/Chart.yaml +++ b/charts/uibytebuildersdev-component-pod-template/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-pod-template description: PodTemplate Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-pod-template/ui/create-ui.yaml b/charts/uibytebuildersdev-component-pod-template/ui/create-ui.yaml index 9f08760c4e..275ecb860b 100644 --- a/charts/uibytebuildersdev-component-pod-template/ui/create-ui.yaml +++ b/charts/uibytebuildersdev-component-pod-template/ui/create-ui.yaml @@ -108,7 +108,7 @@ elements: - alias: reusable__podTemplate_linux_options chart: name: uibytebuildersdev-component-se-linux-options - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/spec/properties/securityContext/properties/seLinuxOptions @@ -122,7 +122,7 @@ elements: - alias: reusable_env_variables chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: data#/properties/namespace @@ -221,7 +221,7 @@ elements: - alias: reusable_node_selector_terms_match_expressions chart: name: uibytebuildersdev-component-match-expressions - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/spec/properties/affinity/properties/nodeAffinity/properties/requiredDuringSchedulingIgnoredDuringExecution/properties/nodeSelectorTerms/items/properties/matchExpressions @@ -229,7 +229,7 @@ elements: - alias: reusable_node_selector_terms_match_fields chart: name: uibytebuildersdev-component-match-fields - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/spec/properties/affinity/properties/nodeAffinity/properties/requiredDuringSchedulingIgnoredDuringExecution/properties/nodeSelectorTerms/items/properties/matchFields @@ -302,7 +302,7 @@ elements: - alias: reusable_preferred_match_expressions chart: name: uibytebuildersdev-component-match-expressions - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/spec/properties/affinity/properties/nodeAffinity/properties/preferredDuringSchedulingIgnoredDuringExecution/items/properties/preference/properties/matchExpressions @@ -310,7 +310,7 @@ elements: - alias: reusable_preferred_match_fields chart: name: uibytebuildersdev-component-match-fields - version: v0.23.0 + version: v0.24.0 moduleResolver: fetchJsons schema: $ref: schema#/properties/spec/properties/affinity/properties/nodeAffinity/properties/preferredDuringSchedulingIgnoredDuringExecution/items/properties/preference/properties/matchFields diff --git a/charts/uibytebuildersdev-component-repository-create/Chart.yaml b/charts/uibytebuildersdev-component-repository-create/Chart.yaml index d014e96d01..fa0b91b18c 100644 --- a/charts/uibytebuildersdev-component-repository-create/Chart.yaml +++ b/charts/uibytebuildersdev-component-repository-create/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-repository-create description: RepositoryCreate Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-resources/Chart.yaml b/charts/uibytebuildersdev-component-resources/Chart.yaml index 6684383aab..c41fbb3f9a 100644 --- a/charts/uibytebuildersdev-component-resources/Chart.yaml +++ b/charts/uibytebuildersdev-component-resources/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-resources description: Resources Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-runtime-settings/Chart.yaml b/charts/uibytebuildersdev-component-runtime-settings/Chart.yaml index d1c1a29e89..40c0d2a7e8 100644 --- a/charts/uibytebuildersdev-component-runtime-settings/Chart.yaml +++ b/charts/uibytebuildersdev-component-runtime-settings/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-runtime-settings description: RuntimeSettings Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-runtime-settings/ui/create-ui.yaml b/charts/uibytebuildersdev-component-runtime-settings/ui/create-ui.yaml index cccd546e10..f25d2ae409 100644 --- a/charts/uibytebuildersdev-component-runtime-settings/ui/create-ui.yaml +++ b/charts/uibytebuildersdev-component-runtime-settings/ui/create-ui.yaml @@ -166,7 +166,7 @@ elements: - alias: reusable_env_variables chart: name: uibytebuildersdev-component-env - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: data#/properties/namespace @@ -177,7 +177,7 @@ elements: - alias: reusable_env_from chart: name: uibytebuildersdev-component-env-from - version: v0.23.0 + version: v0.24.0 dataContext: namespace: $ref: data#/properties/namespace diff --git a/charts/uibytebuildersdev-component-se-linux-options/Chart.yaml b/charts/uibytebuildersdev-component-se-linux-options/Chart.yaml index a1fe74f62a..e7d4745cac 100644 --- a/charts/uibytebuildersdev-component-se-linux-options/Chart.yaml +++ b/charts/uibytebuildersdev-component-se-linux-options/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-se-linux-options description: SELinuxOptions Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-selector/Chart.yaml b/charts/uibytebuildersdev-component-selector/Chart.yaml index e7ce960a99..bbed8b698a 100644 --- a/charts/uibytebuildersdev-component-selector/Chart.yaml +++ b/charts/uibytebuildersdev-component-selector/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-selector description: Selector Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-selector/ui/create-ui.yaml b/charts/uibytebuildersdev-component-selector/ui/create-ui.yaml index e384b58b7d..0014a5f1e5 100644 --- a/charts/uibytebuildersdev-component-selector/ui/create-ui.yaml +++ b/charts/uibytebuildersdev-component-selector/ui/create-ui.yaml @@ -17,7 +17,7 @@ elements: - alias: reusable_selector_match_expressions chart: name: uibytebuildersdev-component-match-expressions - version: v0.23.0 + version: v0.24.0 customClass: mb-10 moduleResolver: fetchJsons schema: diff --git a/charts/uibytebuildersdev-component-service-templates/Chart.yaml b/charts/uibytebuildersdev-component-service-templates/Chart.yaml index 3c960e07d8..db4125a7c5 100644 --- a/charts/uibytebuildersdev-component-service-templates/Chart.yaml +++ b/charts/uibytebuildersdev-component-service-templates/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-service-templates description: Service Templates Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uibytebuildersdev-component-stash-presets/Chart.yaml b/charts/uibytebuildersdev-component-stash-presets/Chart.yaml index b32bfd901b..d47dce63fe 100644 --- a/charts/uibytebuildersdev-component-stash-presets/Chart.yaml +++ b/charts/uibytebuildersdev-component-stash-presets/Chart.yaml @@ -2,7 +2,7 @@ apiVersion: v2 name: uibytebuildersdev-component-stash-presets description: Backup Option Component Library type: library -appVersion: v0.23.0 +appVersion: v0.24.0 home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png keywords: @@ -11,4 +11,4 @@ kubeVersion: '>= 1.14.0' maintainers: - email: support@appscode.com name: appscode -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-clusterprofile-editor/Chart.yaml b/charts/uik8sappscodecom-clusterprofile-editor/Chart.yaml index b1578bcc16..78797ed3d5 100644 --- a/charts/uik8sappscodecom-clusterprofile-editor/Chart.yaml +++ b/charts/uik8sappscodecom-clusterprofile-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.k8s.appscode.com","version":"v1alpha1","resource":"clusterprofiles"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ClusterProfile Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uik8sappscodecom-clusterprofile-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-clusterprofile-editor/README.md b/charts/uik8sappscodecom-clusterprofile-editor/README.md index a5510babb3..bd2cac4d22 100644 --- a/charts/uik8sappscodecom-clusterprofile-editor/README.md +++ b/charts/uik8sappscodecom-clusterprofile-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-clusterprofile-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-clusterprofile-editor appscode/uik8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-clusterprofile-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-clusterprofile-editor appscode/uik8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ClusterProfile Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `uik8sappscodecom-clusterprofile-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-clusterprofile-editor appscode/uik8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-clusterprofile-editor appscode/uik8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ClusterProfile Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-c Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-clusterprofile-editor appscode/uik8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.k8s.appscode.com/v1alpha1 +$ helm upgrade -i uik8sappscodecom-clusterprofile-editor appscode/uik8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-clusterprofile-editor appscode/uik8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-clusterprofile-editor appscode/uik8sappscodecom-clusterprofile-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-capi-capa-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-capi-capa-editor/Chart.yaml index c9820e8e8e..bc31edd372 100644 --- a/charts/uik8sappscodecom-featureset-capi-capa-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-capi-capa-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-capi-capa-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-capi-capa-editor/README.md b/charts/uik8sappscodecom-featureset-capi-capa-editor/README.md index 6725183522..a3288f50ac 100644 --- a/charts/uik8sappscodecom-featureset-capi-capa-editor/README.md +++ b/charts/uik8sappscodecom-featureset-capi-capa-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-capi-capa-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-capi-capa-editor appscode/uik8sappscodecom-featureset-capi-capa-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-capi-capa-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-capi-capa-editor appscode/uik8sappscodecom-featureset-capi-capa-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-capi-capa-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capa-editor appscode/uik8sappscodecom-featureset-capi-capa-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-capi-capa-editor appscode/uik8sappscodecom-featureset-capi-capa-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -64,12 +64,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capa-editor appscode/uik8sappscodecom-featureset-capi-capa-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-capi-capa-editor appscode/uik8sappscodecom-featureset-capi-capa-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capa-editor appscode/uik8sappscodecom-featureset-capi-capa-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-capi-capa-editor appscode/uik8sappscodecom-featureset-capi-capa-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-capi-capg-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-capi-capg-editor/Chart.yaml index d44d01b7b8..dda48159f5 100644 --- a/charts/uik8sappscodecom-featureset-capi-capg-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-capi-capg-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: ' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-capi-capg-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-capi-capg-editor/README.md b/charts/uik8sappscodecom-featureset-capi-capg-editor/README.md index 8d3626e761..f2232d5d4f 100644 --- a/charts/uik8sappscodecom-featureset-capi-capg-editor/README.md +++ b/charts/uik8sappscodecom-featureset-capi-capg-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-capi-capg-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-capi-capg-editor appscode/uik8sappscodecom-featureset-capi-capg-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-capi-capg-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-capi-capg-editor appscode/uik8sappscodecom-featureset-capi-capg-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-capi-capg-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capg-editor appscode/uik8sappscodecom-featureset-capi-capg-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-capi-capg-editor appscode/uik8sappscodecom-featureset-capi-capg-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -60,12 +60,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capg-editor appscode/uik8sappscodecom-featureset-capi-capg-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-capi-capg-editor appscode/uik8sappscodecom-featureset-capi-capg-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capg-editor appscode/uik8sappscodecom-featureset-capi-capg-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-capi-capg-editor appscode/uik8sappscodecom-featureset-capi-capg-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-capi-capz-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-capi-capz-editor/Chart.yaml index e387f9d871..e3c1cd75ad 100644 --- a/charts/uik8sappscodecom-featureset-capi-capz-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-capi-capz-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: ' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-capi-capz-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-capi-capz-editor/README.md b/charts/uik8sappscodecom-featureset-capi-capz-editor/README.md index 5febae77e0..c6ef44eb42 100644 --- a/charts/uik8sappscodecom-featureset-capi-capz-editor/README.md +++ b/charts/uik8sappscodecom-featureset-capi-capz-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-capi-capz-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-capi-capz-editor appscode/uik8sappscodecom-featureset-capi-capz-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-capi-capz-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-capi-capz-editor appscode/uik8sappscodecom-featureset-capi-capz-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-capi-capz-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capz-editor appscode/uik8sappscodecom-featureset-capi-capz-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-capi-capz-editor appscode/uik8sappscodecom-featureset-capi-capz-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -60,12 +60,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capz-editor appscode/uik8sappscodecom-featureset-capi-capz-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-capi-capz-editor appscode/uik8sappscodecom-featureset-capi-capz-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-capz-editor appscode/uik8sappscodecom-featureset-capi-capz-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-capi-capz-editor appscode/uik8sappscodecom-featureset-capi-capz-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-capi-core-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-capi-core-editor/Chart.yaml index e1803b5aca..6c1c3fa9db 100644 --- a/charts/uik8sappscodecom-featureset-capi-core-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-capi-core-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-capi-core-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-capi-core-editor/README.md b/charts/uik8sappscodecom-featureset-capi-core-editor/README.md index 30717733b6..44ee043264 100644 --- a/charts/uik8sappscodecom-featureset-capi-core-editor/README.md +++ b/charts/uik8sappscodecom-featureset-capi-core-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-capi-core-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-capi-core-editor appscode/uik8sappscodecom-featureset-capi-core-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-capi-core-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-capi-core-editor appscode/uik8sappscodecom-featureset-capi-core-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-capi-core-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-core-editor appscode/uik8sappscodecom-featureset-capi-core-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-capi-core-editor appscode/uik8sappscodecom-featureset-capi-core-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -62,12 +62,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-core-editor appscode/uik8sappscodecom-featureset-capi-core-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-capi-core-editor appscode/uik8sappscodecom-featureset-capi-core-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-capi-core-editor appscode/uik8sappscodecom-featureset-capi-core-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-capi-core-editor appscode/uik8sappscodecom-featureset-capi-core-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-crossplane-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-crossplane-editor/Chart.yaml index d8ca6190a7..90b35d805d 100644 --- a/charts/uik8sappscodecom-featureset-crossplane-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-crossplane-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-crossplane-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-crossplane-editor/README.md b/charts/uik8sappscodecom-featureset-crossplane-editor/README.md index e86d9ceff1..8a19bc10a7 100644 --- a/charts/uik8sappscodecom-featureset-crossplane-editor/README.md +++ b/charts/uik8sappscodecom-featureset-crossplane-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-crossplane-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-crossplane-editor appscode/uik8sappscodecom-featureset-crossplane-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-crossplane-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-crossplane-editor appscode/uik8sappscodecom-featureset-crossplane-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-crossplane-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-crossplane-editor appscode/uik8sappscodecom-featureset-crossplane-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-crossplane-editor appscode/uik8sappscodecom-featureset-crossplane-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -63,12 +63,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-crossplane-editor appscode/uik8sappscodecom-featureset-crossplane-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-crossplane-editor appscode/uik8sappscodecom-featureset-crossplane-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-crossplane-editor appscode/uik8sappscodecom-featureset-crossplane-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-crossplane-editor appscode/uik8sappscodecom-featureset-crossplane-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-ocm-hub-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-ocm-hub-editor/Chart.yaml index d7ccb617fc..d37e0103d4 100644 --- a/charts/uik8sappscodecom-featureset-ocm-hub-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-ocm-hub-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-ocm-hub-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-ocm-hub-editor/README.md b/charts/uik8sappscodecom-featureset-ocm-hub-editor/README.md index f633ca16e2..ae09210a08 100644 --- a/charts/uik8sappscodecom-featureset-ocm-hub-editor/README.md +++ b/charts/uik8sappscodecom-featureset-ocm-hub-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-ocm-hub-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-ocm-hub-editor appscode/uik8sappscodecom-featureset-ocm-hub-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-ocm-hub-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-ocm-hub-editor appscode/uik8sappscodecom-featureset-ocm-hub-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-ocm-hub-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-ocm-hub-editor appscode/uik8sappscodecom-featureset-ocm-hub-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-ocm-hub-editor appscode/uik8sappscodecom-featureset-ocm-hub-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -68,12 +68,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-ocm-hub-editor appscode/uik8sappscodecom-featureset-ocm-hub-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-ocm-hub-editor appscode/uik8sappscodecom-featureset-ocm-hub-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-ocm-hub-editor appscode/uik8sappscodecom-featureset-ocm-hub-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-ocm-hub-editor appscode/uik8sappscodecom-featureset-ocm-hub-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-ocm-mc-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-ocm-mc-editor/Chart.yaml index 177fcba8d1..cda7c9724a 100644 --- a/charts/uik8sappscodecom-featureset-ocm-mc-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-ocm-mc-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-ocm-mc-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-ocm-mc-editor/README.md b/charts/uik8sappscodecom-featureset-ocm-mc-editor/README.md index 5c982ef261..6f286de246 100644 --- a/charts/uik8sappscodecom-featureset-ocm-mc-editor/README.md +++ b/charts/uik8sappscodecom-featureset-ocm-mc-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-ocm-mc-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-ocm-mc-editor appscode/uik8sappscodecom-featureset-ocm-mc-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-ocm-mc-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-ocm-mc-editor appscode/uik8sappscodecom-featureset-ocm-mc-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-ocm-mc-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-ocm-mc-editor appscode/uik8sappscodecom-featureset-ocm-mc-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-ocm-mc-editor appscode/uik8sappscodecom-featureset-ocm-mc-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -71,12 +71,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-ocm-mc-editor appscode/uik8sappscodecom-featureset-ocm-mc-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-ocm-mc-editor appscode/uik8sappscodecom-featureset-ocm-mc-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-ocm-mc-editor appscode/uik8sappscodecom-featureset-ocm-mc-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-ocm-mc-editor appscode/uik8sappscodecom-featureset-ocm-mc-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-ocm-spoke-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-ocm-spoke-editor/Chart.yaml index def2606f0a..d913e261d0 100644 --- a/charts/uik8sappscodecom-featureset-ocm-spoke-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-ocm-spoke-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-ocm-spoke-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-ocm-spoke-editor/README.md b/charts/uik8sappscodecom-featureset-ocm-spoke-editor/README.md index 047a0d800d..48173846f9 100644 --- a/charts/uik8sappscodecom-featureset-ocm-spoke-editor/README.md +++ b/charts/uik8sappscodecom-featureset-ocm-spoke-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-ocm-spoke-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-ocm-spoke-editor appscode/uik8sappscodecom-featureset-ocm-spoke-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-ocm-spoke-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-ocm-spoke-editor appscode/uik8sappscodecom-featureset-ocm-spoke-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-ocm-spoke-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-ocm-spoke-editor appscode/uik8sappscodecom-featureset-ocm-spoke-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-ocm-spoke-editor appscode/uik8sappscodecom-featureset-ocm-spoke-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -60,12 +60,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-ocm-spoke-editor appscode/uik8sappscodecom-featureset-ocm-spoke-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-ocm-spoke-editor appscode/uik8sappscodecom-featureset-ocm-spoke-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-ocm-spoke-editor appscode/uik8sappscodecom-featureset-ocm-spoke-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-ocm-spoke-editor appscode/uik8sappscodecom-featureset-ocm-spoke-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-backup-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-backup-editor/Chart.yaml index c43828451b..c7da9d36bf 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-backup-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-backup-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-backup-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-backup-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-backup-editor/README.md index 4e8d2f652f..6920333144 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-backup-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-backup-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-backup-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-backup-editor appscode/uik8sappscodecom-featureset-opscenter-backup-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-backup-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-backup-editor appscode/uik8sappscodecom-featureset-opscenter-backup-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-backup-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-backup-editor appscode/uik8sappscodecom-featureset-opscenter-backup-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-backup-editor appscode/uik8sappscodecom-featureset-opscenter-backup-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -63,12 +63,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-backup-editor appscode/uik8sappscodecom-featureset-opscenter-backup-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-backup-editor appscode/uik8sappscodecom-featureset-opscenter-backup-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-backup-editor appscode/uik8sappscodecom-featureset-opscenter-backup-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-backup-editor appscode/uik8sappscodecom-featureset-opscenter-backup-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-core-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-core-editor/Chart.yaml index 1415ea7bd2..5397aae116 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-core-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-core-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-core-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-core-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-core-editor/README.md index 7a8cfd744d..b2a7cf9f78 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-core-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-core-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-core-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-core-editor appscode/uik8sappscodecom-featureset-opscenter-core-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-core-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-core-editor appscode/uik8sappscodecom-featureset-opscenter-core-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-core-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-core-editor appscode/uik8sappscodecom-featureset-opscenter-core-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-core-editor appscode/uik8sappscodecom-featureset-opscenter-core-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -64,12 +64,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-core-editor appscode/uik8sappscodecom-featureset-opscenter-core-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-core-editor appscode/uik8sappscodecom-featureset-opscenter-core-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-core-editor appscode/uik8sappscodecom-featureset-opscenter-core-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-core-editor appscode/uik8sappscodecom-featureset-opscenter-core-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-cost-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-cost-editor/Chart.yaml index 2e47ef77bb..3ff2fef2cf 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-cost-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-cost-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-cost-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-cost-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-cost-editor/README.md index bd72519f0e..340810dd9b 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-cost-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-cost-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-cost-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-cost-editor appscode/uik8sappscodecom-featureset-opscenter-cost-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-cost-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-cost-editor appscode/uik8sappscodecom-featureset-opscenter-cost-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-cost-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-cost-editor appscode/uik8sappscodecom-featureset-opscenter-cost-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-cost-editor appscode/uik8sappscodecom-featureset-opscenter-cost-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -63,12 +63,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-cost-editor appscode/uik8sappscodecom-featureset-opscenter-cost-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-cost-editor appscode/uik8sappscodecom-featureset-opscenter-cost-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-cost-editor appscode/uik8sappscodecom-featureset-opscenter-cost-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-cost-editor appscode/uik8sappscodecom-featureset-opscenter-cost-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-datastore-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-datastore-editor/Chart.yaml index 9cf237a7f4..fce94a5c40 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-datastore-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-datastore-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-datastore-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-datastore-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-datastore-editor/README.md index d659110568..965a935e86 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-datastore-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-datastore-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-datastore-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-datastore-editor appscode/uik8sappscodecom-featureset-opscenter-datastore-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-datastore-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-datastore-editor appscode/uik8sappscodecom-featureset-opscenter-datastore-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-datastore-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-datastore-editor appscode/uik8sappscodecom-featureset-opscenter-datastore-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-datastore-editor appscode/uik8sappscodecom-featureset-opscenter-datastore-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -63,12 +63,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-datastore-editor appscode/uik8sappscodecom-featureset-opscenter-datastore-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-datastore-editor appscode/uik8sappscodecom-featureset-opscenter-datastore-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-datastore-editor appscode/uik8sappscodecom-featureset-opscenter-datastore-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-datastore-editor appscode/uik8sappscodecom-featureset-opscenter-datastore-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-monitoring-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-monitoring-editor/Chart.yaml index fba001334e..72aa2f6e1b 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-monitoring-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-monitoring-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2beta2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-monitoring-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-monitoring-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-monitoring-editor/README.md index 00321c7f91..2e40d52f26 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-monitoring-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-monitoring-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-monitoring-editor appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-monitoring-editor appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-monitoring-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-monitoring-editor appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-monitoring-editor appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -66,12 +66,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-monitoring-editor appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-monitoring-editor appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-monitoring-editor appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-monitoring-editor appscode/uik8sappscodecom-featureset-opscenter-monitoring-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-networking-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-networking-editor/Chart.yaml index e5e5f6cde5..d696a17911 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-networking-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-networking-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-networking-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-networking-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-networking-editor/README.md index 6215919006..8f6ba26d5d 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-networking-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-networking-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-networking-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-networking-editor appscode/uik8sappscodecom-featureset-opscenter-networking-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-networking-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-networking-editor appscode/uik8sappscodecom-featureset-opscenter-networking-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-networking-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-networking-editor appscode/uik8sappscodecom-featureset-opscenter-networking-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-networking-editor appscode/uik8sappscodecom-featureset-opscenter-networking-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -63,12 +63,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-networking-editor appscode/uik8sappscodecom-featureset-opscenter-networking-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-networking-editor appscode/uik8sappscodecom-featureset-opscenter-networking-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-networking-editor appscode/uik8sappscodecom-featureset-opscenter-networking-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-networking-editor appscode/uik8sappscodecom-featureset-opscenter-networking-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-observability-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-observability-editor/Chart.yaml index fc8d6755bb..61185bc366 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-observability-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-observability-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-observability-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-observability-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-observability-editor/README.md index 8d088d13de..943de41561 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-observability-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-observability-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-observability-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-observability-editor appscode/uik8sappscodecom-featureset-opscenter-observability-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-observability-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-observability-editor appscode/uik8sappscodecom-featureset-opscenter-observability-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-observability-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-observability-editor appscode/uik8sappscodecom-featureset-opscenter-observability-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-observability-editor appscode/uik8sappscodecom-featureset-opscenter-observability-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -70,12 +70,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-observability-editor appscode/uik8sappscodecom-featureset-opscenter-observability-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-observability-editor appscode/uik8sappscodecom-featureset-opscenter-observability-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-observability-editor appscode/uik8sappscodecom-featureset-opscenter-observability-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-observability-editor appscode/uik8sappscodecom-featureset-opscenter-observability-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-policy-management-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-policy-management-editor/Chart.yaml index 82a5d9e54b..3263195e11 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-policy-management-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-policy-management-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-policy-management-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-policy-management-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-policy-management-editor/README.md index 9d740f0f41..77d2e5385b 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-policy-management-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-policy-management-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-policy-management-editor appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-policy-management-editor appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-policy-management-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-policy-management-editor appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-policy-management-editor appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -65,12 +65,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-policy-management-editor appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-policy-management-editor appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-policy-management-editor appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-policy-management-editor appscode/uik8sappscodecom-featureset-opscenter-policy-management-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-secret-management-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-secret-management-editor/Chart.yaml index 985d6550c2..a88a793f89 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-secret-management-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-secret-management-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-secret-management-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-secret-management-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-secret-management-editor/README.md index dda91c36e6..cdefe35dff 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-secret-management-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-secret-management-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-secret-management-editor appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-secret-management-editor appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-secret-management-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-secret-management-editor appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-secret-management-editor appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -73,12 +73,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-secret-management-editor appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-secret-management-editor appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-secret-management-editor appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-secret-management-editor appscode/uik8sappscodecom-featureset-opscenter-secret-management-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-security-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-security-editor/Chart.yaml index 0434b0dc33..18996585aa 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-security-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-security-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-security-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-security-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-security-editor/README.md index 3b91412f1b..e8f6b1f8b9 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-security-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-security-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-security-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-security-editor appscode/uik8sappscodecom-featureset-opscenter-security-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-security-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-security-editor appscode/uik8sappscodecom-featureset-opscenter-security-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-security-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-security-editor appscode/uik8sappscodecom-featureset-opscenter-security-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-security-editor appscode/uik8sappscodecom-featureset-opscenter-security-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -64,12 +64,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-security-editor appscode/uik8sappscodecom-featureset-opscenter-security-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-security-editor appscode/uik8sappscodecom-featureset-opscenter-security-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-security-editor appscode/uik8sappscodecom-featureset-opscenter-security-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-security-editor appscode/uik8sappscodecom-featureset-opscenter-security-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-storage-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-storage-editor/Chart.yaml index c363c9a6ec..c28caf6fd0 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-storage-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-storage-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-storage-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-storage-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-storage-editor/README.md index c02081058f..5ad14275f4 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-storage-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-storage-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-storage-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-storage-editor appscode/uik8sappscodecom-featureset-opscenter-storage-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-storage-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-storage-editor appscode/uik8sappscodecom-featureset-opscenter-storage-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-storage-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-storage-editor appscode/uik8sappscodecom-featureset-opscenter-storage-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-storage-editor appscode/uik8sappscodecom-featureset-opscenter-storage-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -63,12 +63,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-storage-editor appscode/uik8sappscodecom-featureset-opscenter-storage-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-storage-editor appscode/uik8sappscodecom-featureset-opscenter-storage-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-storage-editor appscode/uik8sappscodecom-featureset-opscenter-storage-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-storage-editor appscode/uik8sappscodecom-featureset-opscenter-storage-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-opscenter-tools-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-opscenter-tools-editor/Chart.yaml index 3bd7a3f9a6..febf5b61ae 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-tools-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-opscenter-tools-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-opscenter-tools-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-opscenter-tools-editor/README.md b/charts/uik8sappscodecom-featureset-opscenter-tools-editor/README.md index 74ec8c0941..9b0dff5837 100644 --- a/charts/uik8sappscodecom-featureset-opscenter-tools-editor/README.md +++ b/charts/uik8sappscodecom-featureset-opscenter-tools-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-tools-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-tools-editor appscode/uik8sappscodecom-featureset-opscenter-tools-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-opscenter-tools-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-tools-editor appscode/uik8sappscodecom-featureset-opscenter-tools-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-opscenter-tools-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-tools-editor appscode/uik8sappscodecom-featureset-opscenter-tools-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-tools-editor appscode/uik8sappscodecom-featureset-opscenter-tools-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -62,12 +62,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-tools-editor appscode/uik8sappscodecom-featureset-opscenter-tools-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-tools-editor appscode/uik8sappscodecom-featureset-opscenter-tools-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-opscenter-tools-editor appscode/uik8sappscodecom-featureset-opscenter-tools-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-opscenter-tools-editor appscode/uik8sappscodecom-featureset-opscenter-tools-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-featureset-saas-core-editor/Chart.yaml b/charts/uik8sappscodecom-featureset-saas-core-editor/Chart.yaml index a852b93efb..a77ad13674 100644 --- a/charts/uik8sappscodecom-featureset-saas-core-editor/Chart.yaml +++ b/charts/uik8sappscodecom-featureset-saas-core-editor/Chart.yaml @@ -4,7 +4,7 @@ annotations: meta.x-helm.dev/resources: "- group: helm.toolkit.fluxcd.io\n kind: HelmRelease\n\ \ version: v2\n" apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: FeatureSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -16,4 +16,4 @@ maintainers: name: appscode name: uik8sappscodecom-featureset-saas-core-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-featureset-saas-core-editor/README.md b/charts/uik8sappscodecom-featureset-saas-core-editor/README.md index 45c0448dea..e8df9d0279 100644 --- a/charts/uik8sappscodecom-featureset-saas-core-editor/README.md +++ b/charts/uik8sappscodecom-featureset-saas-core-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-featureset-saas-core-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-featureset-saas-core-editor appscode/uik8sappscodecom-featureset-saas-core-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-featureset-saas-core-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-featureset-saas-core-editor appscode/uik8sappscodecom-featureset-saas-core-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a FeatureSet Editor on a [Kubernetes](http://kubernetes.io) c To install/upgrade the chart with the release name `uik8sappscodecom-featureset-saas-core-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-saas-core-editor appscode/uik8sappscodecom-featureset-saas-core-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-featureset-saas-core-editor appscode/uik8sappscodecom-featureset-saas-core-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a FeatureSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -63,12 +63,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-f Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-saas-core-editor appscode/uik8sappscodecom-featureset-saas-core-editor -n default --create-namespace --version=v0.23.0 --set metadata.resource.group=ui.k8s.appscode.com +$ helm upgrade -i uik8sappscodecom-featureset-saas-core-editor appscode/uik8sappscodecom-featureset-saas-core-editor -n default --create-namespace --version=v0.24.0 --set metadata.resource.group=ui.k8s.appscode.com ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-featureset-saas-core-editor appscode/uik8sappscodecom-featureset-saas-core-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-featureset-saas-core-editor appscode/uik8sappscodecom-featureset-saas-core-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-resourcedashboard-editor/Chart.yaml b/charts/uik8sappscodecom-resourcedashboard-editor/Chart.yaml index f64c6fe92e..4f577385d3 100644 --- a/charts/uik8sappscodecom-resourcedashboard-editor/Chart.yaml +++ b/charts/uik8sappscodecom-resourcedashboard-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.k8s.appscode.com","version":"v1alpha1","resource":"resourcedashboards"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceDashboard Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uik8sappscodecom-resourcedashboard-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-resourcedashboard-editor/README.md b/charts/uik8sappscodecom-resourcedashboard-editor/README.md index de12efbe77..4b81ee0390 100644 --- a/charts/uik8sappscodecom-resourcedashboard-editor/README.md +++ b/charts/uik8sappscodecom-resourcedashboard-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-resourcedashboard-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-resourcedashboard-editor appscode/uik8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-resourcedashboard-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-resourcedashboard-editor appscode/uik8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceDashboard Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `uik8sappscodecom-resourcedashboard-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-resourcedashboard-editor appscode/uik8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-resourcedashboard-editor appscode/uik8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceDashboard Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-resourcedashboard-editor appscode/uik8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.k8s.appscode.com/v1alpha1 +$ helm upgrade -i uik8sappscodecom-resourcedashboard-editor appscode/uik8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-resourcedashboard-editor appscode/uik8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-resourcedashboard-editor appscode/uik8sappscodecom-resourcedashboard-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-resourceeditor-editor/Chart.yaml b/charts/uik8sappscodecom-resourceeditor-editor/Chart.yaml index de783fec9b..2e8b2f7b12 100644 --- a/charts/uik8sappscodecom-resourceeditor-editor/Chart.yaml +++ b/charts/uik8sappscodecom-resourceeditor-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.k8s.appscode.com","version":"v1alpha1","resource":"resourceeditors"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceEditor Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uik8sappscodecom-resourceeditor-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-resourceeditor-editor/README.md b/charts/uik8sappscodecom-resourceeditor-editor/README.md index e2f20b2cd0..db1654960a 100644 --- a/charts/uik8sappscodecom-resourceeditor-editor/README.md +++ b/charts/uik8sappscodecom-resourceeditor-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-resourceeditor-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-resourceeditor-editor appscode/uik8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-resourceeditor-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-resourceeditor-editor appscode/uik8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceEditor Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `uik8sappscodecom-resourceeditor-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-resourceeditor-editor appscode/uik8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-resourceeditor-editor appscode/uik8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceEditor Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-resourceeditor-editor appscode/uik8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.k8s.appscode.com/v1alpha1 +$ helm upgrade -i uik8sappscodecom-resourceeditor-editor appscode/uik8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-resourceeditor-editor appscode/uik8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-resourceeditor-editor appscode/uik8sappscodecom-resourceeditor-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uik8sappscodecom-resourceoutlinefilter-editor/Chart.yaml b/charts/uik8sappscodecom-resourceoutlinefilter-editor/Chart.yaml index 17dda34962..e911902914 100644 --- a/charts/uik8sappscodecom-resourceoutlinefilter-editor/Chart.yaml +++ b/charts/uik8sappscodecom-resourceoutlinefilter-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.k8s.appscode.com","version":"v1alpha1","resource":"resourceoutlinefilters"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ResourceOutlineFilter Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uik8sappscodecom-resourceoutlinefilter-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uik8sappscodecom-resourceoutlinefilter-editor/README.md b/charts/uik8sappscodecom-resourceoutlinefilter-editor/README.md index eeba1efe05..004885e2dd 100644 --- a/charts/uik8sappscodecom-resourceoutlinefilter-editor/README.md +++ b/charts/uik8sappscodecom-resourceoutlinefilter-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uik8sappscodecom-resourceoutlinefilter-editor --version=v0.23.0 -$ helm upgrade -i uik8sappscodecom-resourceoutlinefilter-editor appscode/uik8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uik8sappscodecom-resourceoutlinefilter-editor --version=v0.24.0 +$ helm upgrade -i uik8sappscodecom-resourceoutlinefilter-editor appscode/uik8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ResourceOutlineFilter Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `uik8sappscodecom-resourceoutlinefilter-editor`: ```bash -$ helm upgrade -i uik8sappscodecom-resourceoutlinefilter-editor appscode/uik8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uik8sappscodecom-resourceoutlinefilter-editor appscode/uik8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ResourceOutlineFilter Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uik8sappscodecom-r Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uik8sappscodecom-resourceoutlinefilter-editor appscode/uik8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.k8s.appscode.com/v1alpha1 +$ helm upgrade -i uik8sappscodecom-resourceoutlinefilter-editor appscode/uik8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.k8s.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uik8sappscodecom-resourceoutlinefilter-editor appscode/uik8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uik8sappscodecom-resourceoutlinefilter-editor appscode/uik8sappscodecom-resourceoutlinefilter-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-databaseconnection-editor/Chart.yaml b/charts/uikubedbcom-databaseconnection-editor/Chart.yaml index c9eb2d0be8..70b6ce697c 100644 --- a/charts/uikubedbcom-databaseconnection-editor/Chart.yaml +++ b/charts/uikubedbcom-databaseconnection-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"databaseconnections"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: DatabaseConnection Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-databaseconnection-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-databaseconnection-editor/README.md b/charts/uikubedbcom-databaseconnection-editor/README.md index 8df799b30f..594bdbf4d2 100644 --- a/charts/uikubedbcom-databaseconnection-editor/README.md +++ b/charts/uikubedbcom-databaseconnection-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-databaseconnection-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-databaseconnection-editor appscode/uikubedbcom-databaseconnection-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-databaseconnection-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-databaseconnection-editor appscode/uikubedbcom-databaseconnection-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a DatabaseConnection Editor on a [Kubernetes](http://kubernet To install/upgrade the chart with the release name `uikubedbcom-databaseconnection-editor`: ```bash -$ helm upgrade -i uikubedbcom-databaseconnection-editor appscode/uikubedbcom-databaseconnection-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-databaseconnection-editor appscode/uikubedbcom-databaseconnection-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a DatabaseConnection Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-databa Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-databaseconnection-editor appscode/uikubedbcom-databaseconnection-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-databaseconnection-editor appscode/uikubedbcom-databaseconnection-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-databaseconnection-editor appscode/uikubedbcom-databaseconnection-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-databaseconnection-editor appscode/uikubedbcom-databaseconnection-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-elasticsearchinsight-editor/Chart.yaml b/charts/uikubedbcom-elasticsearchinsight-editor/Chart.yaml index 8de0a829b4..4945b7b607 100644 --- a/charts/uikubedbcom-elasticsearchinsight-editor/Chart.yaml +++ b/charts/uikubedbcom-elasticsearchinsight-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"elasticsearchinsights"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ElasticsearchInsight Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-elasticsearchinsight-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-elasticsearchinsight-editor/README.md b/charts/uikubedbcom-elasticsearchinsight-editor/README.md index 72a8ea4fcb..30cf756fdc 100644 --- a/charts/uikubedbcom-elasticsearchinsight-editor/README.md +++ b/charts/uikubedbcom-elasticsearchinsight-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-elasticsearchinsight-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-elasticsearchinsight-editor appscode/uikubedbcom-elasticsearchinsight-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-elasticsearchinsight-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-elasticsearchinsight-editor appscode/uikubedbcom-elasticsearchinsight-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchInsight Editor on a [Kubernetes](http://kubern To install/upgrade the chart with the release name `uikubedbcom-elasticsearchinsight-editor`: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchinsight-editor appscode/uikubedbcom-elasticsearchinsight-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-elasticsearchinsight-editor appscode/uikubedbcom-elasticsearchinsight-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ElasticsearchInsight Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-elasti Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchinsight-editor appscode/uikubedbcom-elasticsearchinsight-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-elasticsearchinsight-editor appscode/uikubedbcom-elasticsearchinsight-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchinsight-editor appscode/uikubedbcom-elasticsearchinsight-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-elasticsearchinsight-editor appscode/uikubedbcom-elasticsearchinsight-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-elasticsearchnodesstats-editor/Chart.yaml b/charts/uikubedbcom-elasticsearchnodesstats-editor/Chart.yaml index e2f8548230..2055a572e9 100644 --- a/charts/uikubedbcom-elasticsearchnodesstats-editor/Chart.yaml +++ b/charts/uikubedbcom-elasticsearchnodesstats-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"elasticsearchnodesstats"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ElasticsearchNodesStats Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-elasticsearchnodesstats-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-elasticsearchnodesstats-editor/README.md b/charts/uikubedbcom-elasticsearchnodesstats-editor/README.md index c44280f646..295617e27d 100644 --- a/charts/uikubedbcom-elasticsearchnodesstats-editor/README.md +++ b/charts/uikubedbcom-elasticsearchnodesstats-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-elasticsearchnodesstats-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-elasticsearchnodesstats-editor appscode/uikubedbcom-elasticsearchnodesstats-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-elasticsearchnodesstats-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-elasticsearchnodesstats-editor appscode/uikubedbcom-elasticsearchnodesstats-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchNodesStats Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `uikubedbcom-elasticsearchnodesstats-editor`: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchnodesstats-editor appscode/uikubedbcom-elasticsearchnodesstats-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-elasticsearchnodesstats-editor appscode/uikubedbcom-elasticsearchnodesstats-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ElasticsearchNodesStats Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-elasti Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchnodesstats-editor appscode/uikubedbcom-elasticsearchnodesstats-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-elasticsearchnodesstats-editor appscode/uikubedbcom-elasticsearchnodesstats-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchnodesstats-editor appscode/uikubedbcom-elasticsearchnodesstats-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-elasticsearchnodesstats-editor appscode/uikubedbcom-elasticsearchnodesstats-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-elasticsearchschemaoverview-editor/Chart.yaml b/charts/uikubedbcom-elasticsearchschemaoverview-editor/Chart.yaml index 91894bd2b1..9b30861856 100644 --- a/charts/uikubedbcom-elasticsearchschemaoverview-editor/Chart.yaml +++ b/charts/uikubedbcom-elasticsearchschemaoverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"elasticsearchschemaoverviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ElasticsearchSchemaOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-elasticsearchschemaoverview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-elasticsearchschemaoverview-editor/README.md b/charts/uikubedbcom-elasticsearchschemaoverview-editor/README.md index c1e33daafa..6e6ac4800c 100644 --- a/charts/uikubedbcom-elasticsearchschemaoverview-editor/README.md +++ b/charts/uikubedbcom-elasticsearchschemaoverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-elasticsearchschemaoverview-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-elasticsearchschemaoverview-editor appscode/uikubedbcom-elasticsearchschemaoverview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-elasticsearchschemaoverview-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-elasticsearchschemaoverview-editor appscode/uikubedbcom-elasticsearchschemaoverview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ElasticsearchSchemaOverview Editor on a [Kubernetes](http:/ To install/upgrade the chart with the release name `uikubedbcom-elasticsearchschemaoverview-editor`: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchschemaoverview-editor appscode/uikubedbcom-elasticsearchschemaoverview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-elasticsearchschemaoverview-editor appscode/uikubedbcom-elasticsearchschemaoverview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ElasticsearchSchemaOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-elasti Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchschemaoverview-editor appscode/uikubedbcom-elasticsearchschemaoverview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-elasticsearchschemaoverview-editor appscode/uikubedbcom-elasticsearchschemaoverview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-elasticsearchschemaoverview-editor appscode/uikubedbcom-elasticsearchschemaoverview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-elasticsearchschemaoverview-editor appscode/uikubedbcom-elasticsearchschemaoverview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mariadbinsight-editor/Chart.yaml b/charts/uikubedbcom-mariadbinsight-editor/Chart.yaml index d14aa8c06d..3c4a271180 100644 --- a/charts/uikubedbcom-mariadbinsight-editor/Chart.yaml +++ b/charts/uikubedbcom-mariadbinsight-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mariadbinsights"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MariaDBInsight Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mariadbinsight-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-mariadbinsight-editor/README.md b/charts/uikubedbcom-mariadbinsight-editor/README.md index a92a33ca5b..fb47deba06 100644 --- a/charts/uikubedbcom-mariadbinsight-editor/README.md +++ b/charts/uikubedbcom-mariadbinsight-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mariadbinsight-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-mariadbinsight-editor appscode/uikubedbcom-mariadbinsight-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-mariadbinsight-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-mariadbinsight-editor appscode/uikubedbcom-mariadbinsight-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBInsight Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `uikubedbcom-mariadbinsight-editor`: ```bash -$ helm upgrade -i uikubedbcom-mariadbinsight-editor appscode/uikubedbcom-mariadbinsight-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-mariadbinsight-editor appscode/uikubedbcom-mariadbinsight-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MariaDBInsight Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mariad Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mariadbinsight-editor appscode/uikubedbcom-mariadbinsight-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mariadbinsight-editor appscode/uikubedbcom-mariadbinsight-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mariadbinsight-editor appscode/uikubedbcom-mariadbinsight-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mariadbinsight-editor appscode/uikubedbcom-mariadbinsight-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mariadbqueries-editor/Chart.yaml b/charts/uikubedbcom-mariadbqueries-editor/Chart.yaml index da6a42f904..309d59aeaa 100644 --- a/charts/uikubedbcom-mariadbqueries-editor/Chart.yaml +++ b/charts/uikubedbcom-mariadbqueries-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mariadbqueries"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MariaDBQueries Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mariadbqueries-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-mariadbqueries-editor/README.md b/charts/uikubedbcom-mariadbqueries-editor/README.md index bb29fa4f23..ce1e3430eb 100644 --- a/charts/uikubedbcom-mariadbqueries-editor/README.md +++ b/charts/uikubedbcom-mariadbqueries-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mariadbqueries-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-mariadbqueries-editor appscode/uikubedbcom-mariadbqueries-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-mariadbqueries-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-mariadbqueries-editor appscode/uikubedbcom-mariadbqueries-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBQueries Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `uikubedbcom-mariadbqueries-editor`: ```bash -$ helm upgrade -i uikubedbcom-mariadbqueries-editor appscode/uikubedbcom-mariadbqueries-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-mariadbqueries-editor appscode/uikubedbcom-mariadbqueries-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MariaDBQueries Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mariad Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mariadbqueries-editor appscode/uikubedbcom-mariadbqueries-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mariadbqueries-editor appscode/uikubedbcom-mariadbqueries-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mariadbqueries-editor appscode/uikubedbcom-mariadbqueries-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mariadbqueries-editor appscode/uikubedbcom-mariadbqueries-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mariadbschemaoverview-editor/Chart.yaml b/charts/uikubedbcom-mariadbschemaoverview-editor/Chart.yaml index 2068db6c49..1c87c3a3c7 100644 --- a/charts/uikubedbcom-mariadbschemaoverview-editor/Chart.yaml +++ b/charts/uikubedbcom-mariadbschemaoverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mariadbschemaoverviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MariaDBSchemaOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mariadbschemaoverview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-mariadbschemaoverview-editor/README.md b/charts/uikubedbcom-mariadbschemaoverview-editor/README.md index 0abd5c2c43..96d976f2cf 100644 --- a/charts/uikubedbcom-mariadbschemaoverview-editor/README.md +++ b/charts/uikubedbcom-mariadbschemaoverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mariadbschemaoverview-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-mariadbschemaoverview-editor appscode/uikubedbcom-mariadbschemaoverview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-mariadbschemaoverview-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-mariadbschemaoverview-editor appscode/uikubedbcom-mariadbschemaoverview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MariaDBSchemaOverview Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `uikubedbcom-mariadbschemaoverview-editor`: ```bash -$ helm upgrade -i uikubedbcom-mariadbschemaoverview-editor appscode/uikubedbcom-mariadbschemaoverview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-mariadbschemaoverview-editor appscode/uikubedbcom-mariadbschemaoverview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MariaDBSchemaOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mariad Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mariadbschemaoverview-editor appscode/uikubedbcom-mariadbschemaoverview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mariadbschemaoverview-editor appscode/uikubedbcom-mariadbschemaoverview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mariadbschemaoverview-editor appscode/uikubedbcom-mariadbschemaoverview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mariadbschemaoverview-editor appscode/uikubedbcom-mariadbschemaoverview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mongodbinsight-editor/Chart.yaml b/charts/uikubedbcom-mongodbinsight-editor/Chart.yaml index 354b82a40e..7c7bfd31b5 100644 --- a/charts/uikubedbcom-mongodbinsight-editor/Chart.yaml +++ b/charts/uikubedbcom-mongodbinsight-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mongodbinsights"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MongoDBInsight Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mongodbinsight-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-mongodbinsight-editor/README.md b/charts/uikubedbcom-mongodbinsight-editor/README.md index 528a58abd5..690accfbe3 100644 --- a/charts/uikubedbcom-mongodbinsight-editor/README.md +++ b/charts/uikubedbcom-mongodbinsight-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mongodbinsight-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-mongodbinsight-editor appscode/uikubedbcom-mongodbinsight-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-mongodbinsight-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-mongodbinsight-editor appscode/uikubedbcom-mongodbinsight-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBInsight Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `uikubedbcom-mongodbinsight-editor`: ```bash -$ helm upgrade -i uikubedbcom-mongodbinsight-editor appscode/uikubedbcom-mongodbinsight-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-mongodbinsight-editor appscode/uikubedbcom-mongodbinsight-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MongoDBInsight Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mongod Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mongodbinsight-editor appscode/uikubedbcom-mongodbinsight-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mongodbinsight-editor appscode/uikubedbcom-mongodbinsight-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mongodbinsight-editor appscode/uikubedbcom-mongodbinsight-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mongodbinsight-editor appscode/uikubedbcom-mongodbinsight-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mongodbqueries-editor/Chart.yaml b/charts/uikubedbcom-mongodbqueries-editor/Chart.yaml index 03ced1e8ef..56375acaac 100644 --- a/charts/uikubedbcom-mongodbqueries-editor/Chart.yaml +++ b/charts/uikubedbcom-mongodbqueries-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mongodbqueries"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MongoDBQueries Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mongodbqueries-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-mongodbqueries-editor/README.md b/charts/uikubedbcom-mongodbqueries-editor/README.md index baaa38ba3e..4405db96d9 100644 --- a/charts/uikubedbcom-mongodbqueries-editor/README.md +++ b/charts/uikubedbcom-mongodbqueries-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mongodbqueries-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-mongodbqueries-editor appscode/uikubedbcom-mongodbqueries-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-mongodbqueries-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-mongodbqueries-editor appscode/uikubedbcom-mongodbqueries-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBQueries Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `uikubedbcom-mongodbqueries-editor`: ```bash -$ helm upgrade -i uikubedbcom-mongodbqueries-editor appscode/uikubedbcom-mongodbqueries-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-mongodbqueries-editor appscode/uikubedbcom-mongodbqueries-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MongoDBQueries Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mongod Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mongodbqueries-editor appscode/uikubedbcom-mongodbqueries-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mongodbqueries-editor appscode/uikubedbcom-mongodbqueries-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mongodbqueries-editor appscode/uikubedbcom-mongodbqueries-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mongodbqueries-editor appscode/uikubedbcom-mongodbqueries-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mongodbschemaoverview-editor/Chart.yaml b/charts/uikubedbcom-mongodbschemaoverview-editor/Chart.yaml index ac9381f578..cc2a372167 100644 --- a/charts/uikubedbcom-mongodbschemaoverview-editor/Chart.yaml +++ b/charts/uikubedbcom-mongodbschemaoverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mongodbschemaoverviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MongoDBSchemaOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mongodbschemaoverview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-mongodbschemaoverview-editor/README.md b/charts/uikubedbcom-mongodbschemaoverview-editor/README.md index f4f7c434f2..1361fc4129 100644 --- a/charts/uikubedbcom-mongodbschemaoverview-editor/README.md +++ b/charts/uikubedbcom-mongodbschemaoverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mongodbschemaoverview-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-mongodbschemaoverview-editor appscode/uikubedbcom-mongodbschemaoverview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-mongodbschemaoverview-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-mongodbschemaoverview-editor appscode/uikubedbcom-mongodbschemaoverview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MongoDBSchemaOverview Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `uikubedbcom-mongodbschemaoverview-editor`: ```bash -$ helm upgrade -i uikubedbcom-mongodbschemaoverview-editor appscode/uikubedbcom-mongodbschemaoverview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-mongodbschemaoverview-editor appscode/uikubedbcom-mongodbschemaoverview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MongoDBSchemaOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mongod Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mongodbschemaoverview-editor appscode/uikubedbcom-mongodbschemaoverview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mongodbschemaoverview-editor appscode/uikubedbcom-mongodbschemaoverview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mongodbschemaoverview-editor appscode/uikubedbcom-mongodbschemaoverview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mongodbschemaoverview-editor appscode/uikubedbcom-mongodbschemaoverview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mysqlinsight-editor/Chart.yaml b/charts/uikubedbcom-mysqlinsight-editor/Chart.yaml index 8ea6284ae3..e88cc39d23 100644 --- a/charts/uikubedbcom-mysqlinsight-editor/Chart.yaml +++ b/charts/uikubedbcom-mysqlinsight-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mysqlinsights"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MySQLInsight Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mysqlinsight-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-mysqlinsight-editor/README.md b/charts/uikubedbcom-mysqlinsight-editor/README.md index 039d95c5fa..f6bb6d3b99 100644 --- a/charts/uikubedbcom-mysqlinsight-editor/README.md +++ b/charts/uikubedbcom-mysqlinsight-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mysqlinsight-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-mysqlinsight-editor appscode/uikubedbcom-mysqlinsight-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-mysqlinsight-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-mysqlinsight-editor appscode/uikubedbcom-mysqlinsight-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLInsight Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `uikubedbcom-mysqlinsight-editor`: ```bash -$ helm upgrade -i uikubedbcom-mysqlinsight-editor appscode/uikubedbcom-mysqlinsight-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-mysqlinsight-editor appscode/uikubedbcom-mysqlinsight-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MySQLInsight Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mysqli Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mysqlinsight-editor appscode/uikubedbcom-mysqlinsight-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mysqlinsight-editor appscode/uikubedbcom-mysqlinsight-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mysqlinsight-editor appscode/uikubedbcom-mysqlinsight-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mysqlinsight-editor appscode/uikubedbcom-mysqlinsight-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mysqlqueries-editor/Chart.yaml b/charts/uikubedbcom-mysqlqueries-editor/Chart.yaml index 7c352587ab..9eea91c6b1 100644 --- a/charts/uikubedbcom-mysqlqueries-editor/Chart.yaml +++ b/charts/uikubedbcom-mysqlqueries-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mysqlqueries"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MySQLQueries Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mysqlqueries-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-mysqlqueries-editor/README.md b/charts/uikubedbcom-mysqlqueries-editor/README.md index b8cd88692b..7f8b129c48 100644 --- a/charts/uikubedbcom-mysqlqueries-editor/README.md +++ b/charts/uikubedbcom-mysqlqueries-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mysqlqueries-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-mysqlqueries-editor appscode/uikubedbcom-mysqlqueries-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-mysqlqueries-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-mysqlqueries-editor appscode/uikubedbcom-mysqlqueries-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLQueries Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `uikubedbcom-mysqlqueries-editor`: ```bash -$ helm upgrade -i uikubedbcom-mysqlqueries-editor appscode/uikubedbcom-mysqlqueries-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-mysqlqueries-editor appscode/uikubedbcom-mysqlqueries-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MySQLQueries Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mysqlq Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mysqlqueries-editor appscode/uikubedbcom-mysqlqueries-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mysqlqueries-editor appscode/uikubedbcom-mysqlqueries-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mysqlqueries-editor appscode/uikubedbcom-mysqlqueries-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mysqlqueries-editor appscode/uikubedbcom-mysqlqueries-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-mysqlschemaoverview-editor/Chart.yaml b/charts/uikubedbcom-mysqlschemaoverview-editor/Chart.yaml index 17b288a01c..251d97ba45 100644 --- a/charts/uikubedbcom-mysqlschemaoverview-editor/Chart.yaml +++ b/charts/uikubedbcom-mysqlschemaoverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"mysqlschemaoverviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: MySQLSchemaOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-mysqlschemaoverview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-mysqlschemaoverview-editor/README.md b/charts/uikubedbcom-mysqlschemaoverview-editor/README.md index 277f6a4512..1116a08df9 100644 --- a/charts/uikubedbcom-mysqlschemaoverview-editor/README.md +++ b/charts/uikubedbcom-mysqlschemaoverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-mysqlschemaoverview-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-mysqlschemaoverview-editor appscode/uikubedbcom-mysqlschemaoverview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-mysqlschemaoverview-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-mysqlschemaoverview-editor appscode/uikubedbcom-mysqlschemaoverview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a MySQLSchemaOverview Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `uikubedbcom-mysqlschemaoverview-editor`: ```bash -$ helm upgrade -i uikubedbcom-mysqlschemaoverview-editor appscode/uikubedbcom-mysqlschemaoverview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-mysqlschemaoverview-editor appscode/uikubedbcom-mysqlschemaoverview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a MySQLSchemaOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-mysqls Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-mysqlschemaoverview-editor appscode/uikubedbcom-mysqlschemaoverview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-mysqlschemaoverview-editor appscode/uikubedbcom-mysqlschemaoverview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-mysqlschemaoverview-editor appscode/uikubedbcom-mysqlschemaoverview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-mysqlschemaoverview-editor appscode/uikubedbcom-mysqlschemaoverview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-pgbouncerinsight-editor/Chart.yaml b/charts/uikubedbcom-pgbouncerinsight-editor/Chart.yaml index 3ea71fd166..8a9e97b1ce 100644 --- a/charts/uikubedbcom-pgbouncerinsight-editor/Chart.yaml +++ b/charts/uikubedbcom-pgbouncerinsight-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"pgbouncerinsights"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PgBouncerInsight Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-pgbouncerinsight-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-pgbouncerinsight-editor/README.md b/charts/uikubedbcom-pgbouncerinsight-editor/README.md index a5e8ef92e7..b831ead533 100644 --- a/charts/uikubedbcom-pgbouncerinsight-editor/README.md +++ b/charts/uikubedbcom-pgbouncerinsight-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-pgbouncerinsight-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-pgbouncerinsight-editor appscode/uikubedbcom-pgbouncerinsight-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-pgbouncerinsight-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-pgbouncerinsight-editor appscode/uikubedbcom-pgbouncerinsight-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerInsight Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `uikubedbcom-pgbouncerinsight-editor`: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerinsight-editor appscode/uikubedbcom-pgbouncerinsight-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-pgbouncerinsight-editor appscode/uikubedbcom-pgbouncerinsight-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PgBouncerInsight Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-pgboun Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerinsight-editor appscode/uikubedbcom-pgbouncerinsight-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-pgbouncerinsight-editor appscode/uikubedbcom-pgbouncerinsight-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerinsight-editor appscode/uikubedbcom-pgbouncerinsight-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-pgbouncerinsight-editor appscode/uikubedbcom-pgbouncerinsight-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-pgbouncerpooloverview-editor/Chart.yaml b/charts/uikubedbcom-pgbouncerpooloverview-editor/Chart.yaml index 5ab43d82bc..a70fbdbf9e 100644 --- a/charts/uikubedbcom-pgbouncerpooloverview-editor/Chart.yaml +++ b/charts/uikubedbcom-pgbouncerpooloverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"pgbouncerpooloverviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PgBouncerPoolOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-pgbouncerpooloverview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-pgbouncerpooloverview-editor/README.md b/charts/uikubedbcom-pgbouncerpooloverview-editor/README.md index 671488f9a4..21024510f2 100644 --- a/charts/uikubedbcom-pgbouncerpooloverview-editor/README.md +++ b/charts/uikubedbcom-pgbouncerpooloverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-pgbouncerpooloverview-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-pgbouncerpooloverview-editor appscode/uikubedbcom-pgbouncerpooloverview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-pgbouncerpooloverview-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-pgbouncerpooloverview-editor appscode/uikubedbcom-pgbouncerpooloverview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerPoolOverview Editor on a [Kubernetes](http://kuber To install/upgrade the chart with the release name `uikubedbcom-pgbouncerpooloverview-editor`: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerpooloverview-editor appscode/uikubedbcom-pgbouncerpooloverview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-pgbouncerpooloverview-editor appscode/uikubedbcom-pgbouncerpooloverview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PgBouncerPoolOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-pgboun Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerpooloverview-editor appscode/uikubedbcom-pgbouncerpooloverview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-pgbouncerpooloverview-editor appscode/uikubedbcom-pgbouncerpooloverview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerpooloverview-editor appscode/uikubedbcom-pgbouncerpooloverview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-pgbouncerpooloverview-editor appscode/uikubedbcom-pgbouncerpooloverview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-pgbouncerpools-editor/Chart.yaml b/charts/uikubedbcom-pgbouncerpools-editor/Chart.yaml index 095711d545..d15733b85c 100644 --- a/charts/uikubedbcom-pgbouncerpools-editor/Chart.yaml +++ b/charts/uikubedbcom-pgbouncerpools-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"pgbouncerpools"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PgBouncerPools Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-pgbouncerpools-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-pgbouncerpools-editor/README.md b/charts/uikubedbcom-pgbouncerpools-editor/README.md index 417fd49615..aff2aad33a 100644 --- a/charts/uikubedbcom-pgbouncerpools-editor/README.md +++ b/charts/uikubedbcom-pgbouncerpools-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-pgbouncerpools-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-pgbouncerpools-editor appscode/uikubedbcom-pgbouncerpools-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-pgbouncerpools-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-pgbouncerpools-editor appscode/uikubedbcom-pgbouncerpools-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerPools Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `uikubedbcom-pgbouncerpools-editor`: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerpools-editor appscode/uikubedbcom-pgbouncerpools-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-pgbouncerpools-editor appscode/uikubedbcom-pgbouncerpools-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PgBouncerPools Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-pgboun Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerpools-editor appscode/uikubedbcom-pgbouncerpools-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-pgbouncerpools-editor appscode/uikubedbcom-pgbouncerpools-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerpools-editor appscode/uikubedbcom-pgbouncerpools-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-pgbouncerpools-editor appscode/uikubedbcom-pgbouncerpools-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-pgbouncerserveroverview-editor/Chart.yaml b/charts/uikubedbcom-pgbouncerserveroverview-editor/Chart.yaml index 100f94c198..95c2ab732a 100644 --- a/charts/uikubedbcom-pgbouncerserveroverview-editor/Chart.yaml +++ b/charts/uikubedbcom-pgbouncerserveroverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"pgbouncerserveroverviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PgBouncerServerOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-pgbouncerserveroverview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-pgbouncerserveroverview-editor/README.md b/charts/uikubedbcom-pgbouncerserveroverview-editor/README.md index 117080ac86..dbc392a4ec 100644 --- a/charts/uikubedbcom-pgbouncerserveroverview-editor/README.md +++ b/charts/uikubedbcom-pgbouncerserveroverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-pgbouncerserveroverview-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-pgbouncerserveroverview-editor appscode/uikubedbcom-pgbouncerserveroverview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-pgbouncerserveroverview-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-pgbouncerserveroverview-editor appscode/uikubedbcom-pgbouncerserveroverview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerServerOverview Editor on a [Kubernetes](http://kub To install/upgrade the chart with the release name `uikubedbcom-pgbouncerserveroverview-editor`: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerserveroverview-editor appscode/uikubedbcom-pgbouncerserveroverview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-pgbouncerserveroverview-editor appscode/uikubedbcom-pgbouncerserveroverview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PgBouncerServerOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-pgboun Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerserveroverview-editor appscode/uikubedbcom-pgbouncerserveroverview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-pgbouncerserveroverview-editor appscode/uikubedbcom-pgbouncerserveroverview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncerserveroverview-editor appscode/uikubedbcom-pgbouncerserveroverview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-pgbouncerserveroverview-editor appscode/uikubedbcom-pgbouncerserveroverview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-pgbouncersettings-editor/Chart.yaml b/charts/uikubedbcom-pgbouncersettings-editor/Chart.yaml index eedcc1f561..23cbea19cf 100644 --- a/charts/uikubedbcom-pgbouncersettings-editor/Chart.yaml +++ b/charts/uikubedbcom-pgbouncersettings-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"pgbouncersettings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PgBouncerSettings Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-pgbouncersettings-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-pgbouncersettings-editor/README.md b/charts/uikubedbcom-pgbouncersettings-editor/README.md index 1d6312c785..8aa159422b 100644 --- a/charts/uikubedbcom-pgbouncersettings-editor/README.md +++ b/charts/uikubedbcom-pgbouncersettings-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-pgbouncersettings-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-pgbouncersettings-editor appscode/uikubedbcom-pgbouncersettings-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-pgbouncersettings-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-pgbouncersettings-editor appscode/uikubedbcom-pgbouncersettings-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PgBouncerSettings Editor on a [Kubernetes](http://kubernete To install/upgrade the chart with the release name `uikubedbcom-pgbouncersettings-editor`: ```bash -$ helm upgrade -i uikubedbcom-pgbouncersettings-editor appscode/uikubedbcom-pgbouncersettings-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-pgbouncersettings-editor appscode/uikubedbcom-pgbouncersettings-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PgBouncerSettings Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-pgboun Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncersettings-editor appscode/uikubedbcom-pgbouncersettings-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-pgbouncersettings-editor appscode/uikubedbcom-pgbouncersettings-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-pgbouncersettings-editor appscode/uikubedbcom-pgbouncersettings-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-pgbouncersettings-editor appscode/uikubedbcom-pgbouncersettings-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-postgresinsight-editor/Chart.yaml b/charts/uikubedbcom-postgresinsight-editor/Chart.yaml index ead04c851f..0d1fbbe354 100644 --- a/charts/uikubedbcom-postgresinsight-editor/Chart.yaml +++ b/charts/uikubedbcom-postgresinsight-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"postgresinsights"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PostgresInsight Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-postgresinsight-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-postgresinsight-editor/README.md b/charts/uikubedbcom-postgresinsight-editor/README.md index 5774dcf030..0be08e1f2e 100644 --- a/charts/uikubedbcom-postgresinsight-editor/README.md +++ b/charts/uikubedbcom-postgresinsight-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-postgresinsight-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-postgresinsight-editor appscode/uikubedbcom-postgresinsight-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-postgresinsight-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-postgresinsight-editor appscode/uikubedbcom-postgresinsight-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresInsight Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `uikubedbcom-postgresinsight-editor`: ```bash -$ helm upgrade -i uikubedbcom-postgresinsight-editor appscode/uikubedbcom-postgresinsight-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-postgresinsight-editor appscode/uikubedbcom-postgresinsight-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PostgresInsight Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-postgr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-postgresinsight-editor appscode/uikubedbcom-postgresinsight-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-postgresinsight-editor appscode/uikubedbcom-postgresinsight-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-postgresinsight-editor appscode/uikubedbcom-postgresinsight-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-postgresinsight-editor appscode/uikubedbcom-postgresinsight-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-postgresqueries-editor/Chart.yaml b/charts/uikubedbcom-postgresqueries-editor/Chart.yaml index 4d31473ffe..9a11126fa8 100644 --- a/charts/uikubedbcom-postgresqueries-editor/Chart.yaml +++ b/charts/uikubedbcom-postgresqueries-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"postgresqueries"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PostgresQueries Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-postgresqueries-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-postgresqueries-editor/README.md b/charts/uikubedbcom-postgresqueries-editor/README.md index 0da5aada54..2963044b7b 100644 --- a/charts/uikubedbcom-postgresqueries-editor/README.md +++ b/charts/uikubedbcom-postgresqueries-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-postgresqueries-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-postgresqueries-editor appscode/uikubedbcom-postgresqueries-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-postgresqueries-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-postgresqueries-editor appscode/uikubedbcom-postgresqueries-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresQueries Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `uikubedbcom-postgresqueries-editor`: ```bash -$ helm upgrade -i uikubedbcom-postgresqueries-editor appscode/uikubedbcom-postgresqueries-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-postgresqueries-editor appscode/uikubedbcom-postgresqueries-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PostgresQueries Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-postgr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-postgresqueries-editor appscode/uikubedbcom-postgresqueries-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-postgresqueries-editor appscode/uikubedbcom-postgresqueries-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-postgresqueries-editor appscode/uikubedbcom-postgresqueries-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-postgresqueries-editor appscode/uikubedbcom-postgresqueries-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-postgresschemaoverview-editor/Chart.yaml b/charts/uikubedbcom-postgresschemaoverview-editor/Chart.yaml index 5f6b20ef05..1aae90aa03 100644 --- a/charts/uikubedbcom-postgresschemaoverview-editor/Chart.yaml +++ b/charts/uikubedbcom-postgresschemaoverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"postgresschemaoverviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PostgresSchemaOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-postgresschemaoverview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-postgresschemaoverview-editor/README.md b/charts/uikubedbcom-postgresschemaoverview-editor/README.md index d4d76a4952..b5663311f1 100644 --- a/charts/uikubedbcom-postgresschemaoverview-editor/README.md +++ b/charts/uikubedbcom-postgresschemaoverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-postgresschemaoverview-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-postgresschemaoverview-editor appscode/uikubedbcom-postgresschemaoverview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-postgresschemaoverview-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-postgresschemaoverview-editor appscode/uikubedbcom-postgresschemaoverview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresSchemaOverview Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `uikubedbcom-postgresschemaoverview-editor`: ```bash -$ helm upgrade -i uikubedbcom-postgresschemaoverview-editor appscode/uikubedbcom-postgresschemaoverview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-postgresschemaoverview-editor appscode/uikubedbcom-postgresschemaoverview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PostgresSchemaOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-postgr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-postgresschemaoverview-editor appscode/uikubedbcom-postgresschemaoverview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-postgresschemaoverview-editor appscode/uikubedbcom-postgresschemaoverview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-postgresschemaoverview-editor appscode/uikubedbcom-postgresschemaoverview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-postgresschemaoverview-editor appscode/uikubedbcom-postgresschemaoverview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-postgressettings-editor/Chart.yaml b/charts/uikubedbcom-postgressettings-editor/Chart.yaml index d8c90a8ad8..1076a7fe61 100644 --- a/charts/uikubedbcom-postgressettings-editor/Chart.yaml +++ b/charts/uikubedbcom-postgressettings-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"postgressettings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: PostgresSettings Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-postgressettings-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-postgressettings-editor/README.md b/charts/uikubedbcom-postgressettings-editor/README.md index c4ce5af08d..7a9771be26 100644 --- a/charts/uikubedbcom-postgressettings-editor/README.md +++ b/charts/uikubedbcom-postgressettings-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-postgressettings-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-postgressettings-editor appscode/uikubedbcom-postgressettings-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-postgressettings-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-postgressettings-editor appscode/uikubedbcom-postgressettings-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a PostgresSettings Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `uikubedbcom-postgressettings-editor`: ```bash -$ helm upgrade -i uikubedbcom-postgressettings-editor appscode/uikubedbcom-postgressettings-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-postgressettings-editor appscode/uikubedbcom-postgressettings-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a PostgresSettings Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-postgr Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-postgressettings-editor appscode/uikubedbcom-postgressettings-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-postgressettings-editor appscode/uikubedbcom-postgressettings-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-postgressettings-editor appscode/uikubedbcom-postgressettings-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-postgressettings-editor appscode/uikubedbcom-postgressettings-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-proxysqlinsight-editor/Chart.yaml b/charts/uikubedbcom-proxysqlinsight-editor/Chart.yaml index 7f1879d5c0..4e9a58723e 100644 --- a/charts/uikubedbcom-proxysqlinsight-editor/Chart.yaml +++ b/charts/uikubedbcom-proxysqlinsight-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"proxysqlinsights"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProxySQLInsight Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-proxysqlinsight-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-proxysqlinsight-editor/README.md b/charts/uikubedbcom-proxysqlinsight-editor/README.md index c182087e67..829bc80c2e 100644 --- a/charts/uikubedbcom-proxysqlinsight-editor/README.md +++ b/charts/uikubedbcom-proxysqlinsight-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-proxysqlinsight-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-proxysqlinsight-editor appscode/uikubedbcom-proxysqlinsight-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-proxysqlinsight-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-proxysqlinsight-editor appscode/uikubedbcom-proxysqlinsight-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQLInsight Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `uikubedbcom-proxysqlinsight-editor`: ```bash -$ helm upgrade -i uikubedbcom-proxysqlinsight-editor appscode/uikubedbcom-proxysqlinsight-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-proxysqlinsight-editor appscode/uikubedbcom-proxysqlinsight-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProxySQLInsight Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-proxys Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-proxysqlinsight-editor appscode/uikubedbcom-proxysqlinsight-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-proxysqlinsight-editor appscode/uikubedbcom-proxysqlinsight-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-proxysqlinsight-editor appscode/uikubedbcom-proxysqlinsight-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-proxysqlinsight-editor appscode/uikubedbcom-proxysqlinsight-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-proxysqlqueries-editor/Chart.yaml b/charts/uikubedbcom-proxysqlqueries-editor/Chart.yaml index 5f54da57a2..9b55ebf2f2 100644 --- a/charts/uikubedbcom-proxysqlqueries-editor/Chart.yaml +++ b/charts/uikubedbcom-proxysqlqueries-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"proxysqlqueries"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProxySQLQueries Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-proxysqlqueries-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-proxysqlqueries-editor/README.md b/charts/uikubedbcom-proxysqlqueries-editor/README.md index c34c9f8c81..aefdbc5993 100644 --- a/charts/uikubedbcom-proxysqlqueries-editor/README.md +++ b/charts/uikubedbcom-proxysqlqueries-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-proxysqlqueries-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-proxysqlqueries-editor appscode/uikubedbcom-proxysqlqueries-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-proxysqlqueries-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-proxysqlqueries-editor appscode/uikubedbcom-proxysqlqueries-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQLQueries Editor on a [Kubernetes](http://kubernetes. To install/upgrade the chart with the release name `uikubedbcom-proxysqlqueries-editor`: ```bash -$ helm upgrade -i uikubedbcom-proxysqlqueries-editor appscode/uikubedbcom-proxysqlqueries-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-proxysqlqueries-editor appscode/uikubedbcom-proxysqlqueries-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProxySQLQueries Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-proxys Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-proxysqlqueries-editor appscode/uikubedbcom-proxysqlqueries-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-proxysqlqueries-editor appscode/uikubedbcom-proxysqlqueries-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-proxysqlqueries-editor appscode/uikubedbcom-proxysqlqueries-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-proxysqlqueries-editor appscode/uikubedbcom-proxysqlqueries-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-proxysqlsettings-editor/Chart.yaml b/charts/uikubedbcom-proxysqlsettings-editor/Chart.yaml index 44a22e7ea6..7c31fee5d2 100644 --- a/charts/uikubedbcom-proxysqlsettings-editor/Chart.yaml +++ b/charts/uikubedbcom-proxysqlsettings-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"proxysqlsettings"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ProxySQLSettings Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-proxysqlsettings-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-proxysqlsettings-editor/README.md b/charts/uikubedbcom-proxysqlsettings-editor/README.md index ac060e0315..fdf78b8746 100644 --- a/charts/uikubedbcom-proxysqlsettings-editor/README.md +++ b/charts/uikubedbcom-proxysqlsettings-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-proxysqlsettings-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-proxysqlsettings-editor appscode/uikubedbcom-proxysqlsettings-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-proxysqlsettings-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-proxysqlsettings-editor appscode/uikubedbcom-proxysqlsettings-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ProxySQLSettings Editor on a [Kubernetes](http://kubernetes To install/upgrade the chart with the release name `uikubedbcom-proxysqlsettings-editor`: ```bash -$ helm upgrade -i uikubedbcom-proxysqlsettings-editor appscode/uikubedbcom-proxysqlsettings-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-proxysqlsettings-editor appscode/uikubedbcom-proxysqlsettings-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ProxySQLSettings Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-proxys Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-proxysqlsettings-editor appscode/uikubedbcom-proxysqlsettings-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-proxysqlsettings-editor appscode/uikubedbcom-proxysqlsettings-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-proxysqlsettings-editor appscode/uikubedbcom-proxysqlsettings-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-proxysqlsettings-editor appscode/uikubedbcom-proxysqlsettings-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-redisinsight-editor/Chart.yaml b/charts/uikubedbcom-redisinsight-editor/Chart.yaml index ffbcad49e1..f177bcdd8c 100644 --- a/charts/uikubedbcom-redisinsight-editor/Chart.yaml +++ b/charts/uikubedbcom-redisinsight-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"redisinsights"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisInsight Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-redisinsight-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-redisinsight-editor/README.md b/charts/uikubedbcom-redisinsight-editor/README.md index e9cc8b2d61..23854ac961 100644 --- a/charts/uikubedbcom-redisinsight-editor/README.md +++ b/charts/uikubedbcom-redisinsight-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-redisinsight-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-redisinsight-editor appscode/uikubedbcom-redisinsight-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-redisinsight-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-redisinsight-editor appscode/uikubedbcom-redisinsight-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisInsight Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `uikubedbcom-redisinsight-editor`: ```bash -$ helm upgrade -i uikubedbcom-redisinsight-editor appscode/uikubedbcom-redisinsight-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-redisinsight-editor appscode/uikubedbcom-redisinsight-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisInsight Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-redisi Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-redisinsight-editor appscode/uikubedbcom-redisinsight-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-redisinsight-editor appscode/uikubedbcom-redisinsight-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-redisinsight-editor appscode/uikubedbcom-redisinsight-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-redisinsight-editor appscode/uikubedbcom-redisinsight-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-redisqueries-editor/Chart.yaml b/charts/uikubedbcom-redisqueries-editor/Chart.yaml index 9b199292b2..34e8fe1edd 100644 --- a/charts/uikubedbcom-redisqueries-editor/Chart.yaml +++ b/charts/uikubedbcom-redisqueries-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"redisqueries"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisQueries Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-redisqueries-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-redisqueries-editor/README.md b/charts/uikubedbcom-redisqueries-editor/README.md index a8ac9c90f1..83dbf5127b 100644 --- a/charts/uikubedbcom-redisqueries-editor/README.md +++ b/charts/uikubedbcom-redisqueries-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-redisqueries-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-redisqueries-editor appscode/uikubedbcom-redisqueries-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-redisqueries-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-redisqueries-editor appscode/uikubedbcom-redisqueries-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisQueries Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `uikubedbcom-redisqueries-editor`: ```bash -$ helm upgrade -i uikubedbcom-redisqueries-editor appscode/uikubedbcom-redisqueries-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-redisqueries-editor appscode/uikubedbcom-redisqueries-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisQueries Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-redisq Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-redisqueries-editor appscode/uikubedbcom-redisqueries-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-redisqueries-editor appscode/uikubedbcom-redisqueries-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-redisqueries-editor appscode/uikubedbcom-redisqueries-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-redisqueries-editor appscode/uikubedbcom-redisqueries-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uikubedbcom-redisschemaoverview-editor/Chart.yaml b/charts/uikubedbcom-redisschemaoverview-editor/Chart.yaml index 2ae5744b7b..3b9c685b15 100644 --- a/charts/uikubedbcom-redisschemaoverview-editor/Chart.yaml +++ b/charts/uikubedbcom-redisschemaoverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.kubedb.com","version":"v1alpha1","resource":"redisschemaoverviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: RedisSchemaOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uikubedbcom-redisschemaoverview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uikubedbcom-redisschemaoverview-editor/README.md b/charts/uikubedbcom-redisschemaoverview-editor/README.md index 060d07b31e..e1af8ba1c8 100644 --- a/charts/uikubedbcom-redisschemaoverview-editor/README.md +++ b/charts/uikubedbcom-redisschemaoverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uikubedbcom-redisschemaoverview-editor --version=v0.23.0 -$ helm upgrade -i uikubedbcom-redisschemaoverview-editor appscode/uikubedbcom-redisschemaoverview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uikubedbcom-redisschemaoverview-editor --version=v0.24.0 +$ helm upgrade -i uikubedbcom-redisschemaoverview-editor appscode/uikubedbcom-redisschemaoverview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a RedisSchemaOverview Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `uikubedbcom-redisschemaoverview-editor`: ```bash -$ helm upgrade -i uikubedbcom-redisschemaoverview-editor appscode/uikubedbcom-redisschemaoverview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uikubedbcom-redisschemaoverview-editor appscode/uikubedbcom-redisschemaoverview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a RedisSchemaOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uikubedbcom-rediss Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uikubedbcom-redisschemaoverview-editor appscode/uikubedbcom-redisschemaoverview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.kubedb.com/v1alpha1 +$ helm upgrade -i uikubedbcom-redisschemaoverview-editor appscode/uikubedbcom-redisschemaoverview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.kubedb.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uikubedbcom-redisschemaoverview-editor appscode/uikubedbcom-redisschemaoverview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uikubedbcom-redisschemaoverview-editor appscode/uikubedbcom-redisschemaoverview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/uistashappscodecom-backupoverview-editor/Chart.yaml b/charts/uistashappscodecom-backupoverview-editor/Chart.yaml index fbc8d9d739..fa513229f5 100644 --- a/charts/uistashappscodecom-backupoverview-editor/Chart.yaml +++ b/charts/uistashappscodecom-backupoverview-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"ui.stash.appscode.com","version":"v1alpha1","resource":"backupoverviews"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: BackupOverview Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: uistashappscodecom-backupoverview-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/uistashappscodecom-backupoverview-editor/README.md b/charts/uistashappscodecom-backupoverview-editor/README.md index 388053e19e..089f3e4e58 100644 --- a/charts/uistashappscodecom-backupoverview-editor/README.md +++ b/charts/uistashappscodecom-backupoverview-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/uistashappscodecom-backupoverview-editor --version=v0.23.0 -$ helm upgrade -i uistashappscodecom-backupoverview-editor appscode/uistashappscodecom-backupoverview-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/uistashappscodecom-backupoverview-editor --version=v0.24.0 +$ helm upgrade -i uistashappscodecom-backupoverview-editor appscode/uistashappscodecom-backupoverview-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a BackupOverview Editor on a [Kubernetes](http://kubernetes.i To install/upgrade the chart with the release name `uistashappscodecom-backupoverview-editor`: ```bash -$ helm upgrade -i uistashappscodecom-backupoverview-editor appscode/uistashappscodecom-backupoverview-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i uistashappscodecom-backupoverview-editor appscode/uistashappscodecom-backupoverview-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a BackupOverview Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `uistashappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i uistashappscodecom-backupoverview-editor appscode/uistashappscodecom-backupoverview-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=ui.stash.appscode.com/v1alpha1 +$ helm upgrade -i uistashappscodecom-backupoverview-editor appscode/uistashappscodecom-backupoverview-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=ui.stash.appscode.com/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i uistashappscodecom-backupoverview-editor appscode/uistashappscodecom-backupoverview-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i uistashappscodecom-backupoverview-editor appscode/uistashappscodecom-backupoverview-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/virtualsecretsdev-secret-editor/Chart.yaml b/charts/virtualsecretsdev-secret-editor/Chart.yaml index f6f0cb0fa3..b012cc3597 100644 --- a/charts/virtualsecretsdev-secret-editor/Chart.yaml +++ b/charts/virtualsecretsdev-secret-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"virtual-secrets.dev","version":"v1alpha1","resource":"secrets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Secret Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: virtualsecretsdev-secret-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/virtualsecretsdev-secret-editor/README.md b/charts/virtualsecretsdev-secret-editor/README.md index d4c2ea3ff8..332dafe359 100644 --- a/charts/virtualsecretsdev-secret-editor/README.md +++ b/charts/virtualsecretsdev-secret-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/virtualsecretsdev-secret-editor --version=v0.23.0 -$ helm upgrade -i virtualsecretsdev-secret-editor appscode/virtualsecretsdev-secret-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/virtualsecretsdev-secret-editor --version=v0.24.0 +$ helm upgrade -i virtualsecretsdev-secret-editor appscode/virtualsecretsdev-secret-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Secret Editor on a [Kubernetes](http://kubernetes.io) clust To install/upgrade the chart with the release name `virtualsecretsdev-secret-editor`: ```bash -$ helm upgrade -i virtualsecretsdev-secret-editor appscode/virtualsecretsdev-secret-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i virtualsecretsdev-secret-editor appscode/virtualsecretsdev-secret-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Secret Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `virtualsecretsdev- Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i virtualsecretsdev-secret-editor appscode/virtualsecretsdev-secret-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=virtual-secrets.dev/v1alpha1 +$ helm upgrade -i virtualsecretsdev-secret-editor appscode/virtualsecretsdev-secret-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=virtual-secrets.dev/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i virtualsecretsdev-secret-editor appscode/virtualsecretsdev-secret-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i virtualsecretsdev-secret-editor appscode/virtualsecretsdev-secret-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/voyagerappscodecom-certificate-editor/Chart.yaml b/charts/voyagerappscodecom-certificate-editor/Chart.yaml index cac0c93362..841ea82825 100644 --- a/charts/voyagerappscodecom-certificate-editor/Chart.yaml +++ b/charts/voyagerappscodecom-certificate-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"voyager.appscode.com","version":"v1beta1","resource":"certificates"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Certificate Editor home: https://byte.builders icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: voyagerappscodecom-certificate-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/voyagerappscodecom-certificate-editor/README.md b/charts/voyagerappscodecom-certificate-editor/README.md index ef7863c036..c4565fbac3 100644 --- a/charts/voyagerappscodecom-certificate-editor/README.md +++ b/charts/voyagerappscodecom-certificate-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/voyagerappscodecom-certificate-editor --version=v0.23.0 -$ helm upgrade -i voyagerappscodecom-certificate-editor appscode/voyagerappscodecom-certificate-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/voyagerappscodecom-certificate-editor --version=v0.24.0 +$ helm upgrade -i voyagerappscodecom-certificate-editor appscode/voyagerappscodecom-certificate-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Certificate Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `voyagerappscodecom-certificate-editor`: ```bash -$ helm upgrade -i voyagerappscodecom-certificate-editor appscode/voyagerappscodecom-certificate-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i voyagerappscodecom-certificate-editor appscode/voyagerappscodecom-certificate-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Certificate Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `voyagerappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i voyagerappscodecom-certificate-editor appscode/voyagerappscodecom-certificate-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=voyager.appscode.com/v1beta1 +$ helm upgrade -i voyagerappscodecom-certificate-editor appscode/voyagerappscodecom-certificate-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=voyager.appscode.com/v1beta1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i voyagerappscodecom-certificate-editor appscode/voyagerappscodecom-certificate-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i voyagerappscodecom-certificate-editor appscode/voyagerappscodecom-certificate-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/voyagerappscodecom-ingress-editor/Chart.yaml b/charts/voyagerappscodecom-ingress-editor/Chart.yaml index 10a0365ce3..5c4616b1d4 100644 --- a/charts/voyagerappscodecom-ingress-editor/Chart.yaml +++ b/charts/voyagerappscodecom-ingress-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"voyager.appscode.com","version":"v1","resource":"ingresses"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: Ingress Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: voyagerappscodecom-ingress-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/voyagerappscodecom-ingress-editor/README.md b/charts/voyagerappscodecom-ingress-editor/README.md index cb896062ed..c8882f6d9c 100644 --- a/charts/voyagerappscodecom-ingress-editor/README.md +++ b/charts/voyagerappscodecom-ingress-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/voyagerappscodecom-ingress-editor --version=v0.23.0 -$ helm upgrade -i voyagerappscodecom-ingress-editor appscode/voyagerappscodecom-ingress-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/voyagerappscodecom-ingress-editor --version=v0.24.0 +$ helm upgrade -i voyagerappscodecom-ingress-editor appscode/voyagerappscodecom-ingress-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a Ingress Editor on a [Kubernetes](http://kubernetes.io) clus To install/upgrade the chart with the release name `voyagerappscodecom-ingress-editor`: ```bash -$ helm upgrade -i voyagerappscodecom-ingress-editor appscode/voyagerappscodecom-ingress-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i voyagerappscodecom-ingress-editor appscode/voyagerappscodecom-ingress-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a Ingress Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `voyagerappscodecom Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i voyagerappscodecom-ingress-editor appscode/voyagerappscodecom-ingress-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=voyager.appscode.com/v1 +$ helm upgrade -i voyagerappscodecom-ingress-editor appscode/voyagerappscodecom-ingress-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=voyager.appscode.com/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i voyagerappscodecom-ingress-editor appscode/voyagerappscodecom-ingress-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i voyagerappscodecom-ingress-editor appscode/voyagerappscodecom-ingress-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/workopenclustermanagementio-appliedmanifestwork-editor/Chart.yaml b/charts/workopenclustermanagementio-appliedmanifestwork-editor/Chart.yaml index fe74870a92..12c4684572 100644 --- a/charts/workopenclustermanagementio-appliedmanifestwork-editor/Chart.yaml +++ b/charts/workopenclustermanagementio-appliedmanifestwork-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"work.open-cluster-management.io","version":"v1","resource":"appliedmanifestworks"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: AppliedManifestWork Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: workopenclustermanagementio-appliedmanifestwork-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/workopenclustermanagementio-appliedmanifestwork-editor/README.md b/charts/workopenclustermanagementio-appliedmanifestwork-editor/README.md index 0f6f41891e..d34529aa72 100644 --- a/charts/workopenclustermanagementio-appliedmanifestwork-editor/README.md +++ b/charts/workopenclustermanagementio-appliedmanifestwork-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/workopenclustermanagementio-appliedmanifestwork-editor --version=v0.23.0 -$ helm upgrade -i workopenclustermanagementio-appliedmanifestwork-editor appscode/workopenclustermanagementio-appliedmanifestwork-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/workopenclustermanagementio-appliedmanifestwork-editor --version=v0.24.0 +$ helm upgrade -i workopenclustermanagementio-appliedmanifestwork-editor appscode/workopenclustermanagementio-appliedmanifestwork-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a AppliedManifestWork Editor on a [Kubernetes](http://kuberne To install/upgrade the chart with the release name `workopenclustermanagementio-appliedmanifestwork-editor`: ```bash -$ helm upgrade -i workopenclustermanagementio-appliedmanifestwork-editor appscode/workopenclustermanagementio-appliedmanifestwork-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i workopenclustermanagementio-appliedmanifestwork-editor appscode/workopenclustermanagementio-appliedmanifestwork-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a AppliedManifestWork Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `workopenclusterman Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i workopenclustermanagementio-appliedmanifestwork-editor appscode/workopenclustermanagementio-appliedmanifestwork-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=work.open-cluster-management.io/v1 +$ helm upgrade -i workopenclustermanagementio-appliedmanifestwork-editor appscode/workopenclustermanagementio-appliedmanifestwork-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=work.open-cluster-management.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i workopenclustermanagementio-appliedmanifestwork-editor appscode/workopenclustermanagementio-appliedmanifestwork-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i workopenclustermanagementio-appliedmanifestwork-editor appscode/workopenclustermanagementio-appliedmanifestwork-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/workopenclustermanagementio-manifestwork-editor/Chart.yaml b/charts/workopenclustermanagementio-manifestwork-editor/Chart.yaml index bd05a8ba41..7362845641 100644 --- a/charts/workopenclustermanagementio-manifestwork-editor/Chart.yaml +++ b/charts/workopenclustermanagementio-manifestwork-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"work.open-cluster-management.io","version":"v1","resource":"manifestworks"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ManifestWork Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: workopenclustermanagementio-manifestwork-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/workopenclustermanagementio-manifestwork-editor/README.md b/charts/workopenclustermanagementio-manifestwork-editor/README.md index 41ba02bd36..50692f639f 100644 --- a/charts/workopenclustermanagementio-manifestwork-editor/README.md +++ b/charts/workopenclustermanagementio-manifestwork-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/workopenclustermanagementio-manifestwork-editor --version=v0.23.0 -$ helm upgrade -i workopenclustermanagementio-manifestwork-editor appscode/workopenclustermanagementio-manifestwork-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/workopenclustermanagementio-manifestwork-editor --version=v0.24.0 +$ helm upgrade -i workopenclustermanagementio-manifestwork-editor appscode/workopenclustermanagementio-manifestwork-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManifestWork Editor on a [Kubernetes](http://kubernetes.io) To install/upgrade the chart with the release name `workopenclustermanagementio-manifestwork-editor`: ```bash -$ helm upgrade -i workopenclustermanagementio-manifestwork-editor appscode/workopenclustermanagementio-manifestwork-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i workopenclustermanagementio-manifestwork-editor appscode/workopenclustermanagementio-manifestwork-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ManifestWork Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `workopenclusterman Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i workopenclustermanagementio-manifestwork-editor appscode/workopenclustermanagementio-manifestwork-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=work.open-cluster-management.io/v1 +$ helm upgrade -i workopenclustermanagementio-manifestwork-editor appscode/workopenclustermanagementio-manifestwork-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=work.open-cluster-management.io/v1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i workopenclustermanagementio-manifestwork-editor appscode/workopenclustermanagementio-manifestwork-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i workopenclustermanagementio-manifestwork-editor appscode/workopenclustermanagementio-manifestwork-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ``` diff --git a/charts/workopenclustermanagementio-manifestworkreplicaset-editor/Chart.yaml b/charts/workopenclustermanagementio-manifestworkreplicaset-editor/Chart.yaml index 1dc07b0ef4..76336d7838 100644 --- a/charts/workopenclustermanagementio-manifestworkreplicaset-editor/Chart.yaml +++ b/charts/workopenclustermanagementio-manifestworkreplicaset-editor/Chart.yaml @@ -1,7 +1,7 @@ annotations: meta.x-helm.dev/editor: '{"group":"work.open-cluster-management.io","version":"v1alpha1","resource":"manifestworkreplicasets"}' apiVersion: v2 -appVersion: v0.23.0 +appVersion: v0.24.0 description: ManifestWorkReplicaSet Editor home: https://appscode.com icon: https://cdn.appscode.com/images/products/bytebuilders/bytebuilders-512x512.png @@ -13,4 +13,4 @@ maintainers: name: appscode name: workopenclustermanagementio-manifestworkreplicaset-editor type: application -version: v0.23.0 +version: v0.24.0 diff --git a/charts/workopenclustermanagementio-manifestworkreplicaset-editor/README.md b/charts/workopenclustermanagementio-manifestworkreplicaset-editor/README.md index f4007ebcd0..8f4d162e55 100644 --- a/charts/workopenclustermanagementio-manifestworkreplicaset-editor/README.md +++ b/charts/workopenclustermanagementio-manifestworkreplicaset-editor/README.md @@ -7,8 +7,8 @@ ```bash $ helm repo add appscode https://charts.appscode.com/stable/ $ helm repo update -$ helm search repo appscode/workopenclustermanagementio-manifestworkreplicaset-editor --version=v0.23.0 -$ helm upgrade -i workopenclustermanagementio-manifestworkreplicaset-editor appscode/workopenclustermanagementio-manifestworkreplicaset-editor -n default --create-namespace --version=v0.23.0 +$ helm search repo appscode/workopenclustermanagementio-manifestworkreplicaset-editor --version=v0.24.0 +$ helm upgrade -i workopenclustermanagementio-manifestworkreplicaset-editor appscode/workopenclustermanagementio-manifestworkreplicaset-editor -n default --create-namespace --version=v0.24.0 ``` ## Introduction @@ -24,7 +24,7 @@ This chart deploys a ManifestWorkReplicaSet Editor on a [Kubernetes](http://kube To install/upgrade the chart with the release name `workopenclustermanagementio-manifestworkreplicaset-editor`: ```bash -$ helm upgrade -i workopenclustermanagementio-manifestworkreplicaset-editor appscode/workopenclustermanagementio-manifestworkreplicaset-editor -n default --create-namespace --version=v0.23.0 +$ helm upgrade -i workopenclustermanagementio-manifestworkreplicaset-editor appscode/workopenclustermanagementio-manifestworkreplicaset-editor -n default --create-namespace --version=v0.24.0 ``` The command deploys a ManifestWorkReplicaSet Editor on the Kubernetes cluster in the default configuration. The [configuration](#configuration) section lists the parameters that can be configured during installation. @@ -56,12 +56,12 @@ The following table lists the configurable parameters of the `workopenclusterman Specify each parameter using the `--set key=value[,key=value]` argument to `helm upgrade -i`. For example: ```bash -$ helm upgrade -i workopenclustermanagementio-manifestworkreplicaset-editor appscode/workopenclustermanagementio-manifestworkreplicaset-editor -n default --create-namespace --version=v0.23.0 --set apiVersion=work.open-cluster-management.io/v1alpha1 +$ helm upgrade -i workopenclustermanagementio-manifestworkreplicaset-editor appscode/workopenclustermanagementio-manifestworkreplicaset-editor -n default --create-namespace --version=v0.24.0 --set apiVersion=work.open-cluster-management.io/v1alpha1 ``` Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example: ```bash -$ helm upgrade -i workopenclustermanagementio-manifestworkreplicaset-editor appscode/workopenclustermanagementio-manifestworkreplicaset-editor -n default --create-namespace --version=v0.23.0 --values values.yaml +$ helm upgrade -i workopenclustermanagementio-manifestworkreplicaset-editor appscode/workopenclustermanagementio-manifestworkreplicaset-editor -n default --create-namespace --version=v0.24.0 --values values.yaml ```