STATUS6 doesn't show MQTT SSL state

[jeroenst]

PROBLEM DESCRIPTION

A clear and concise description of what the problem is.

When I request status info the state of using ssl/tls is missing from STATUS6

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used (e.g., Sonoff Basic): Sonoff zbbridge
• Tasmota binary firmware version number used: 9.4.0.4
  • Pre-compiled
  • Self-compiled
• Flashing tools used: webpage
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:
19:53:25.096 SRC: Backlog
19:53:25.098 CMD: Group 0, Index 1, Command "GPIO", Data "255"
19:53:25.104 MQT: home/TASMOTA_ZIGBEE/stat/RESULT = {"GPIO0":{"320":"Led_i1"},"GPIO1":{"3552":"Zigbee Tx"},"GPIO2":{"0":"None"},"GPIO3":{"3584":"Zigbee Rx"},"GPIO4":{"5312":"Zigbee Rst1"},"GPIO5":{"0":"None"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO12":{"640":"I2C SDA"},"GPIO13":{"544":"LedLink"},"GPIO14":{"608":"I2C SCL"},"GPIO15":{"0":"None"},"GPIO16":{"32":"Button1"},"GPIO17":{"0":"None"}}

19:59:04.547 CMD: module
19:59:04.549 SRC: WebConsole from 172.30.30.100
19:59:04.550 CMD: Group 0, Index 1, Command "MODULE", Data ""
19:59:04.554 MQT: home/TASMOTA_ZIGBEE/stat/RESULT = {"Module":{"0":"Zigbee"}}

20:00:00.593 CMD: gpio 255
20:00:00.595 SRC: WebConsole from 172.30.30.100
20:00:00.596 CMD: Group 0, Index 1, Command "GPIO", Data "255"
20:00:00.603 MQT: home/TASMOTA_ZIGBEE/stat/RESULT = {"GPIO0":{"320":"Led_i1"},"GPIO1":{"3552":"Zigbee Tx"},"GPIO2":{"0":"None"},"GPIO3":{"3584":"Zigbee Rx"},"GPIO4":{"5312":"Zigbee Rst1"},"GPIO5":{"0":"None"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO12":{"640":"I2C SDA"},"GPIO13":{"544":"LedLink"},"GPIO14":{"608":"I2C SCL"},"GPIO15":{"0":"None"},"GPIO16":{"32":"Button1"},"GPIO17":{"0":"None"}}

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• Provide the output of this command: Status 0:

  STATUS 0 output here:

20:26:15.589 CMD: status 0
20:26:15.591 SRC: WebConsole from 172.30.30.100
20:26:15.593 CMD: Group 0, Index 1, Command "STATUS", Data "0"
20:26:15.597 MQT: home/TASMOTA_ZIGBEE/stat/STATUS = {"Status":{"Module":0,"DeviceName":"Tasmota","FriendlyName":["Tasmota"],"Topic":"TASMOTA_ZIGBEE","ButtonTopic":"0","Power":0,"PowerOnState":3,"LedState":0,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":1,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":1,"InfoRetain":1,"StateRetain":1}}
20:26:15.602 MQT: home/TASMOTA_ZIGBEE/stat/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota/tasmota-zbbridge.bin","RestartReason":"Software/System restart","Uptime":"0T00:34:48","StartupUTC":"2021-05-18T18:51:27","Sleep":50,"CfgHolder":4617,"BootCount":251,"BCResetTime":"2021-02-21T12:36:05","SaveCount":420,"SaveAddress":"FD000"}}
20:26:15.608 MQT: home/TASMOTA_ZIGBEE/stat/STATUS2 = {"StatusFWR":{"Version":"9.4.0.4(zbbridge)","BuildDateTime":"2021-05-17T13:46:13","Boot":7,"Core":"2_7_4_9","SDK":"2.2.2-dev(38a443e)","CpuFrequency":160,"Hardware":"ESP8266EX","CR":"430/699"}}
20:26:15.611 MQT: home/TASMOTA_ZIGBEE/stat/STATUS3 = {"StatusLOG":{"SerialLog":0,"WebLog":3,"MqttLog":0,"SysLog":2,"LogHost":"jeroensteenhuis.nl","LogPort":514,"SSId":["xxxxx",""],"TelePeriod":60,"Resolution":"558180C0","SetOption":["00008069","2805C8000100060000005A00000000000000","00000080","00006080","00000180"]}}
20:26:15.618 MQT: home/TASMOTA_ZIGBEE/stat/STATUS4 = {"StatusMEM":{"ProgramSize":585,"Free":1204,"Heap":24,"ProgramFlashSize":2048,"FlashSize":2048,"FlashChipId":"1540A1","FlashFrequency":40,"FlashMode":3,"Features":["00000809","0F1007C4","04400001","00000002","00000000","00000000","00020000","00000000","00000000"],"Drivers":"1,2,7,9,10,20,23,41","Sensors":""}}
20:26:15.624 MQT: home/TASMOTA_ZIGBEE/stat/STATUS5 = {"StatusNET":{"Hostname":"TASMOTA_ZIGBEE","IPAddress":"172.30.31.54","Gateway":"172.30.30.254","Subnetmask":"255.255.254.0","DNSServer":"172.30.30.3","Mac":"84:CC:A8:9B:A2:74","Webserver":2,"WifiConfig":4,"WifiPower":17.0}}
20:26:15.630 MQT: home/TASMOTA_ZIGBEE/stat/STATUS6 = {"StatusMQT":{"MqttHost":"xxxxx","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_9BA274","MqttUser":"xxxxx","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
20:26:15.636 MQT: home/TASMOTA_ZIGBEE/stat/STATUS7 = {"StatusTIM":{"UTC":"2021-05-18T19:26:15","Local":"2021-05-18T20:26:15","StartDST":"2021-03-28T02:00:00","EndDST":"2021-10-31T03:00:00","Timezone":"+01:00","Sunrise":"05:04","Sunset":"20:28"}}
20:26:15.639 MQT: home/TASMOTA_ZIGBEE/stat/STATUS10 = {"StatusSNS":{"Time":"2021-05-18T20:26:15"}}
20:26:15.646 MQT: home/TASMOTA_ZIGBEE/stat/STATUS11 = {"StatusSTS":{"Time":"2021-05-18T20:26:15","Uptime":"0T00:34:48","UptimeSec":2088,"Vcc":3.438,"Heap":24,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"xxxxx","BSSId":"0E:EC:DA:8D:48:02","Channel":5,"RSSI":100,"Signal":-45,"LinkCount":1,"Downtime":"0T00:00:04"}}}

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:

TO REPRODUCE

Steps to reproduce the behavior:

send CMD STATUS 0 with MQTT to Tasmota and see result.

This is the current result:
home/TASMOTA_ZIGBEE/stat/STATUS6 = {"StatusMQT":{"MqttHost":"xxxxxxx","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_9BA274","MqttUser":"jeroen","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

STATUS6 should show the ssl/tls state on mqtt

I would expect:
home/TASMOTA_ZIGBEE/stat/STATUS6 = {"StatusMQT":{"MqttHost":"xxxxx","MqttPort":1883,"MqttSSL":0,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_9BA274","MqttUser":"jeroen","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

home/TASMOTA_ZIGBEE/stat/STATUS6 = {"StatusMQT":{"MqttHost":"xxxxxx","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_9BA274","MqttUser":"jeroen","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

[ascillato2]

TO REPRODUCE
Steps to reproduce the behavior:
send CMD STATUS 0 with MQTT to Tasmota and see result

Please, can you share what is the result you are obtaining and which is the result you expect?

[jeroenst]

Of course,
This is the current result:

home/TASMOTA_ZIGBEE/stat/STATUS6 = {"StatusMQT":{"MqttHost":"xxxxxxx","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_9BA274","MqttUser":"jeroen","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}

I would expect:

home/TASMOTA_ZIGBEE/stat/STATUS6 = {"StatusMQT":{"MqttHost":"xxxxx","MqttPort":1883,**"MqttSSL":0,**"MqttClientMask":"DVES_%06X","MqttClient":"DVES_9BA274","MqttUser":"jeroen","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}

[sfromis]

In general, I'd not expect SetOption values to also appear separately in Status command output. To query that value, use SetOption103. Strictly speaking, you can see the Value of SetOption103 if you parse the "SetOption" bits in Status 3. That would be flag bit 0x00200000 in the 4th value. Off in your case.

Still, there are lots of settings not showing up in Status command outputs.

[jeroenst]

SSL is just as important as port and clientid and should show up in this status info imo.

[jeroenst]

Anyway, thanks for the tip, I managed to get the status from the option bits.