Temperature cannot be displayed on Page 0 (header)

[jmkinny]

PROBLEM DESCRIPTION

A clear and concise description of what the problem is.

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Problem is not scripter related, in this case open a discussion and tag gemu2015
• Device used (e.g., Sonoff Basic): _____
• Tasmota binary firmware version number used: _____
  • Pre-compiled
  • Self-compiled
• Flashing tools used: _____
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• Provide the output of this command: Status 0:

  STATUS 0 output here:

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:

TO REPRODUCE

Steps to reproduce the behavior:

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

[jmkinny]

Tasmota32 v 14.5 on Gution 4848S040, trying to display temperature (ESP32#Temperature) on Page 0 (header) does not display temperature. Same definition on Page 1 works OK. This worked OK in v 14.4.

[jmkinny]

Here is the line from pages.jsonl that does NOT work in 14.5:
{"id":94,"parentid":92,"obj":"btn","x":0,"y":0,"w":55,"h":16,"border_opa":0,"bg_color":"#000000","bg_color02":"#9C7F68","action":"p3","text_font":"montserrat-20","text_color":"#FFD044","text":"---°F","val_rule":"ESP32#Temperature","val":0,"val_rule_formula":"val * 10","text_rule":"ESP32#Temperature","text_rule_format":"%3.f °F"}

Here is the line from pages.jsonl that DOES work:

{"id":2,"obj":"label","x":0,"y":70,"w%":100,"h":100,"text":"--°F","val":0,"val_rule":"ESP32#Temperature","val_rule_formula":"val * 10","text_rule":"ESP32#Temperature","text_rule_format":"CPU Temperature %2.f °F","text_font":"montserrat-28","align":"center"}

Other than formatting differences, these are equivalent except one is on page 0 (header) and the other is on page 1. the "---°F" part is written to page 0, but the text_rule and val_rule are not executed.