4.0 version Menu

[N7SIX]

Hello Armel,

I just explored the menu settings and noticed that there are two Power settings available on the main menu, with one of them including an additional "User" option. Additionally, I would like to kindly suggest that features such as DCS, CTCSS, and others be included in the main menu rather than the hidden menu. However, if there are specific reasons for the current menu arrangement, I would greatly appreciate it if you could share those with us.

Thank you
73 Sean

[armel]

Hello,

Sorry but, it's not an issue so I'm moving it as a discussion.

I just explored the menu settings and noticed that there are two Power settings available on the main menu, with one of them including an additional "User" option.

That's right.

The Power menu (02/68) allows you to select a level from LOW 1, LOW 2, LOW 3, LOW 4, LOW 5, MID, HIGH, and USER. Since power is a per-channel setting, you can, for example, assign LOW1 to memory channel M1 and MID to memory channel M2.

If you choose USER, you can fine-tune the power level using the SetPwr menu (57/68). Important... when set to USER, the power level defined in SetPwr (57/68) will apply to all memory channels configured with USER power mode.

I would like to kindly suggest that features such as DCS, CTCSS, and others be included in the main menu rather than the hidden menu.

I don’t understand. The menus for DCS and CTCSS are ALREADY in the main menu (and not in hidden menu). They are also per-channel settings, which is why they are at the beginning of the list : RxDCS (03/68), RxCTCS (04/68), TxDCS (05/68), TxCTCS (06/68).

Armel, F4HWN.

[N7SIX]

Thank you for clarifying the power menu settings. I truly appreciate your help!

Regarding the tone settings, I will need to double-check again and possibly take some pictures of the 4.0 firmware version for reference. I did not find the tones in the main menu, but I noticed that by pressing the PTT and turning on the K5, I could access a hidden menu to change the tone settings. However, I would like to revisit the menu settings once I get home to confirm everything.

Thanks again for your assistance!

[N7SIX]

I must have overlooked it at the time and didn't notice the tone settings in the main menu. I appreciate the clarification and stand corrected. I didn't no what was on my mind! Haha

73 Sean

[armel]

No problem :)

Armel, F4HWN.