F4HWN v3.0

💻FLASH WITH A BROWSER💻

I suggest you choose one of the following two versions:

📺 Bandscope version (without FM broadcast support)

📻 Broadcast version (without bandscope support)

Last chance... if you can't decide between these two versions, you can always take the version below. It retains support for Broadcast FM and Bandscope. But VOX support has been removed...

⏱️ Bandscope & Broadcast version (without VOX support)

📘 Up to date manual available in a Wiki section 📘
⭐ Dedicated CHIRP driver available at uv-k5-chirp-driver ⭐️

Changes

• Split in 2 versions : bandscope or broadcast FM,
• Fix issue #142 (menu 17 ChName),
• Fix issue #138 (next keypress eat),
• Fix issue #131 (backlight level 1 & 2),
• Improved management of long names in menus,
• Remove AM Fix menu (AM Fix is enable by default),
• Add CA HAM F_LOCK for Canadian zone,
• Add GMRS/FRS/MURS F_LOCK for North America zone,
• Improve Spectrum Analyser and add channel name,
• Improve memory channel input,
• Improve scan lists :
  • Add new list 3,
  • Add new list 0 (channel without list…),
  • Add new scan options :
    • Scan list 0 (all channels without list),
    • Scan list 1,
    • Scan list 2,
    • Scan list 3,
    • Scan lists [1, 2, 3],
    • Scan all (all channels with ou without list),
  • Add scan list shortcuts.

Bandscope version, 2 931 bytes left.
Broadcast version, 4 627 bytes left.
Bandscope & Broadcast version (without VOX support), 79 bytes left.

Enjoy,

Armel F4HWN.

F4HWN v2.8.1

💻FLASH WITH A BROWSER💻

📘 Up to date manual available in a Wiki section 📘
⭐ Dedicated CHIRP driver available at uv-k5-chirp-driver ⭐️

Changes

• Some memory optimizations,
• Fix bug with RX timer and MONITOR action (issue #126),
• USB charging icon removed from status line.

Only 27 bytes left... :)

Enjoy,

Armel F4HWN.

F4HWN v2.8

💻FLASH WITH A BROWSER💻

📘 Up to date manual available in a Wiki section 📘
⭐ Dedicated CHIRP driver available at uv-k5-chirp-driver ⭐️

Changes

• Some memory optimizations,
• Fix a double bug with TX timer (issue #23),
• Rename menu TxPwr (02/63) to Power,
• Rename menu Demodu (12/63) to Mode,
• Rename some actions:
  • SWITCH VFO to VFO A VFO B,
  • VFO/MR to VFO MEM,
  • SWITCH DEMODU to MODE,
  • SWITCH RXMODE to RX MODE,
  • SWITCH PTT to PTT,
  • SWITCH WIDE NARROW to WIDE NARROW.
• Remove FM in status bar (totally useless),
• Increase PWM frequency to 25 kHz (PR #114),
• Improve RX MODE action,
• Add MAIN ONLY action,
• Add screenshot feature (not ENABLE by default)

Only 3 bytes left... :)

Enjoy,

Armel F4HWN.

F4HWN v2.7

💻FLASH WITH A BROWSER💻

📘 Up to date manual available in a Wiki section 📘
⭐ Dedicated CHIRP driver available at uv-k5-chirp-driver ⭐️

Changes

• Some memory optimizations,
• Fix a bug concerning scan and RX timer,
• Fix a bug concerning DW and TX DISABLE on VFO,
• Fix a bug concerning keylock and hidden menu,
• Fix a bug concerning F+1 that was not persistent after restart,
• Fix a bug concerning TOT alert and Backlight,
• Improve hidden menu and move directly to F Lock menu 64/71,
• Improve List I and II label,
• Improve status bar memory usage,
• Improve OnePush feature.

Only 27 bytes left... :)

Enjoy,

Armel F4HWN.

F4HWN v2.6

💻FLASH WITH A BROWSER💻

📘 Up to date manual available in a Wiki section 📘
⭐ Dedicated CHIRP driver available at uv-k5-chirp-driver ⭐️

Changes

• Some memory optimizations,
• Fix a bug concerning memory channel copy to VFO and band change,
• Fix a bug concerning 1750Hz, if squelch is open,
• Menu index is always visible, even if a menu is selected,
• Move BatTxt menu from 34/63 to 30/63 (just after BatSave menu 29/63),
• Rename BackLt to BLTime,
• Rename BltTRX to BLTxRx,
• Status bar refactoring,
• Add Tx and Rx timers.

Only 151 bytes left... :)

Enjoy,

Armel F4HWN.

F4HWN v2.5

💻FLASH WITH A BROWSER💻

📘 Up to date manual available in a Wiki section 📘
⭐ Dedicated CHIRP driver available at uv-k5-chirp-driver ⭐️

Changes

• Many memory optimizations,
• Remove slashed zero in fonts for improve visibility,
• Fix a bug on FAGCI Spectrum Exit,
• Fix a bug if the RxMode is MAIN ONLY and a signal is received at startup,
• Add new MENU_F_LOCK option dedicated to PMR 446,
• Improve BackLt (35/63) OFF, 00m:05s to 05m:00s by step of 5 seconds, ON,
• Improve TxTOut (28/63) 00m:30s to 15m:00s by step of 5 seconds.

Only 243 bytes left... :)

Enjoy,

Armel F4HWN.

F4HWN v2.4

💻FLASH WITH A BROWSER💻

📘 Up to date manual available in a Wiki section 📘
⭐ Dedicated CHIRP driver available at uv-k5-chirp-driver ⭐️

Changes

• Code refactoring to optimize memory occupation,
• Remove blink and SOS functionality,
• Fix a display issue on startup (if PonMsg was set to NONE or SOUND),
• Try to fix STE issue,
• Change BatVal menu (52/63) to SysInf, which displays the firmware version in addition to the battery status,
• Add LONG press on MENU, in * SCAN mode (List I or List II), to temporarily exclude a memory channel if (not working with * SCAN ALL).

Only 7 bytes left... :)

Enjoy,

Armel F4HWN.

F4HWN v2.3

💻FLASH WITH A BROWSER💻

📘 Up to date manual available in a Wiki section 📘
⭐ Dedicated CHIRP driver available at uv-k5-chirp-driver ⭐️

Changes

• Fix a display bug with ScanRange,
• Fix a possible issue with Squelch,
• Disable ENABLE_BLMIN_TMP_OFF,
• Add F+8 to quickly switch backlight between BLMin and BLMax on demand (this bypass BackLt strategy),
• Add F+9 to return to BackLt strategy.

Long presses on keys 8 and 9 work as before.

Only 3 bytes left... so game over :)

Enjoy,

Armel F4HWN.

F4HWN v2.2

💻FLASH WITH A BROWSER💻

📘 Up to date manual available in a Wiki section 📘
⭐ Dedicated CHIRP driver available at uv-k5-chirp-driver ⭐️

Changes

• Fix a display bug in MAIN ONLY mode when entering DTMF code,
• Add F + F1 and F + F2 key combination to dynamically change the Step (in VFO mode),
• Improved OnePush operation in case of TOT,
• ENABLE_BLMIN_TMP_OFF option enabled.

Less than 0.3% memory left...

Enjoy,

Armel F4HWN.